Implement handling of "atomic fragements" as outlined in
draft-gont-6man-ipv6-atomic-fragments to mitigate one class of
possible fragmentation-based attacks.
As mentioned in the commit message of r237571 (copied from a prototype
patch of mine) also check if the 2nd in6_setscope() failed and return
the error in that case.
MFC r238022:
Remove 14 not very useful characters " HDA CODEC PCM" from HDA pcm
device names to shorten them. PulseAudio reported to have problems with
names longer then 63 chars and at least in XMMS long names are inconvinient.
MFC r238011:
Restore GPIO config quirks handling, lost during last big refactoring.
This fixes sound from speakers on some laptops, including MacBook Pro.
Unfortunately the change in r237958 resulted in s/install/instclean/ due to
the aggressive pattern matching of the :C modifier. I tested build and
install in 2 phases, however with different solutions, resulting in the
breakage. Mea culpa.
The solution is to break out the all: target. This causes a few lines of
code duplication, but now the all: target works as it should, and the
other targets continue to work as they did before.
While I'm here, add a ===> header line to the start of each port build
to make it easier to find/more clear in the logs.
For the ports modules building code, clean WRKDIR before building. This is
important for those that use -DNO_CLEAN routinely, since it will prevent
installing stale stuff, and even more important when the port is upgraded
to a newer version. When the user doesn't use -DNO_CLEAN, this will create
an infinitesimal amount of extra work, but won't hurt anything.
This is necessary because the ports tree has flags that prevent the ususal
'update the build if newer source files exist' logic from doing what it
would do in the base.
Fix a LOR acquiring the if_afdata lock while holding an rtentry lock.
Possibly do some entra work in case we would not get into the
ifa0 != NULL paths later as we already do for the mltaddr before.
XXX We should possibly error in case in6_setscope fails.
ken [Sun, 1 Jul 2012 05:23:59 +0000 (05:23 +0000)]
MFC 237683:
r237683 | ken | 2012-06-27 21:48:54 -0600 (Wed, 27 Jun 2012) | 129 lines
Bring in LSI's latest mps(4) 6Gb SAS and WarpDrive driver, version
14.00.00.01-fbsd.
Their description of the changes is as follows:
1. Copyright contents has been changed in all respective .c
and .h files
2. Support for WRITE12 and READ12 for direct-io (warpdrive only)
has been added.
3. Driver has added checks to see if Drive has READ_CAP_16
support before sending it down to the device.
If SPC3_SID_PROTECT flag is set in the inquiry data, the
device supports protection information, and must support
the 16 byte read capacity command, otherwise continue without
sending read cap 16. This will optimize driver performance,
since it will not send READ_CAP_16 to the drive which does
not have support of READ_CAP_16.
4. With new approach, "MPTIOCTL_RESET_ADAPTER" IOCTL will not
use DELAY() which is busy loop implementation.
It will use <msleep> (Better way to sleep without busy
loop). Also from the HBA reset code path and some other
places, DELAY() is replaced with msleep() or "pause()",
which is based on sleep/wakeup style calls. Driver use
msleep()/pause() instead of DELAY based on CAN_SLEEP/NO_SLEEP
flags to avoid busy loop which is not required all the
time.e.a
a. While driver is getting loaded, driver calls most of the
commands with NO_SLEEP.
b. When Driver is functional and it needs Reinit of HBA,
CAN_SLEEP flag is used.
5. <mpslsi> driver is not Endian safe. It will not work on Big
Endian machines like Sparc and PowerPC platforms because it
assumes it is running on a Little Endian machine.
Driver code is modified such way that it does not assume CPU
arch is Little Endian.
a. All places where Driver interacts from HBA to Host, it
converts Little Endian format to CPU format.
b. All places where Driver interacts from Host to HBA, it
converts CPU format to Little Endian.
6. Findout memory leaks in FreeBSD Driver and resolve those,
such as memory leak in targ's luns creation/deletion.
Also added additional checks to see memory allocation
success/fail.
7. Add loginfo prints as debug message, i.e. When FW sends any
loginfo, Driver should print those as debug message.
This will help for debugging purpose.
8. There is possibility to get config request timeout. Current
driver is able to detect config request timetout, but it does
not do anything on config_request timeout. Driver should
call mps_reinit() if any request_poll (which is called as
part of config_request) is time out.
9. cdb length check is required for 32 byte CDB. Add correct mpi
control value for 32 bit CDB as below while submitting SCSI IO
Request to controller.
mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
10. Check the actual status of Message unit reset
(mps_message_unit_reset).Previously FreeBSD Driver just writes
MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET and never check the ack
(it just wait for 50 millisecond). So, Driver now check the
status of "MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET" after writing
it to the FW.
Now it also checking for whether doorbell ack uses msleep with
proper sleep flags, instead of <DELAY>.
11. Previously CAM does not detect Multi-Lun Devices. In order to
detect Multi-Lun Devices by CAM the driver needs following change
set:
a. There is "max_lun" field which Driver need to set based on
hw/fw support. Currently LSI released driver does not set
this field.
b. Default of "max_lun" should not be 0 in OS, but it is
currently set to 0 in CAM layer.
c. Export max_lun capacity to 255
12. Driver will not reset target info after port enable complete and
also do Device removal when Device remove from FW. The detail
description is as follows
a. When Driver receive WD PD add events, it will add all
information in driver local data structure.
b. Only for WD, we have below checks after port enable
completes, where driver clear off all information retrieved
at #1.
if ((sc->WD_available &&
(sc->WD_hide_expose == MPS_WD_HIDE_ALWAYS)) ||
(sc->WD_valid_config && (sc->WD_hide_expose ==
MPS_WD_HIDE_IF_VOLUME)) {
// clear off target data structure.
}
It is mainly not to attach PDs to OS.
FreeBSD does bus rescan as older Parallel scsi style. So Driver
needs to handle which Drive is visible to OS. That is a reason
we have to clear off targ information for PDs.
Again, above logic was implemented long time ago. Similar concept
we have for non-wd also. For that, LSI have introduced different
logic to hide PDs.
Eventually, because of above gap, when Phy goes offline, we
observe below failure. That is what Driver is not doing complete
removal of device with FW. (which was pointed by Scott)
Apr 5 02:39:24 Freebsd7 kernel: mpslsi0: mpssas_prepare_remove
Apr 5 02:39:24 Freebsd7 kernel: mpssas_prepare_remove 497 : invalid handle 0xe
Now Driver will not reset target info after port enable complete
and also will do Device removal when Device remove from FW.
13. Returning "CAM_SEL_TIMEOUT" instead of "CAM_TID_INVALID"
error code on request to the Target IDs that have no devices
conected at that moment. As if "CAM_TID_INVALID" error code
is returned to the CAM Layaer then it results in a huge chain
of errors in verbose kernel messages on boot and every
hot-plug event.
MFC r237178:
attach_generic causes missing devices in /dev when the driver interacts with some non-highpoint controollers. Change attach_generic to be off by default.
jhb [Fri, 29 Jun 2012 21:25:24 +0000 (21:25 +0000)]
MFC 235024,235029,235556,235834,235845:
Use MADT to match ACPI Processor objects to CPUs. MADT and DSDT/SSDTs may
list CPUs in different orders, especially for disabled logical cores. Now
we match ACPI IDs from the MADT with Processor objects, strictly order CPUs
accordingly, and ignore disabled cores. This prevents us from executing
methods for other CPUs, e. g., _PSS for disabled logical core, which may not
exist. Unfortunately, it is known that there are a few systems with buggy
BIOSes that do not have unique ACPI IDs for MADT and Processor objects. To
work around these problems, 'debug.acpi.cpu_unordered' tunable is added.
Set this to a non-zero value to restore the old behavior.
marius [Fri, 29 Jun 2012 18:39:31 +0000 (18:39 +0000)]
MFC: r236581
The loaddev environment variable is not modifiable once set, so it is not
update for ZFS. It seems that this does not really affect anything except
the help command. Nevertheless, rearrange things so loaddev is set only
once in all cases in order to get it right.
Pointed out by: avg
jhb [Fri, 29 Jun 2012 17:28:03 +0000 (17:28 +0000)]
MFC 197552:
Silence warning printed by getfsspec(3) when /etc/fstab does not exist
fstab: /etc/fstab:0: No such file or directory
and from dump(8) when setfsent(3) fails due to /etc/fstab not existing:
DUMP: Can't open /etc/fstab for dump table information: No such...
This makes daily and security periodic runs somewhat cleaner in jails
which lack /etc/fstab files.
jhb [Fri, 29 Jun 2012 17:21:46 +0000 (17:21 +0000)]
MFC 233191:
Fix madvise(MADV_WILLNEED) to properly handle individual mappings larger
than 4GB. Specifically, the inlined version of 'ptoa' of the the 'int'
count of pages overflowed on 64-bit platforms. While here, change
vm_object_madvise() to accept two vm_pindex_t parameters (start and end)
rather than a (start, count) tuple to match other VM APIs as suggested
by alc@.
jhb [Fri, 29 Jun 2012 17:12:26 +0000 (17:12 +0000)]
MFC 237334:
Move the per-thread deferred user map entries list into a private list
in vm_map_process_deferred() which is then iterated to release map entries.
This avoids having a nested vm map unlock operation called from the loop
body attempt to recuse into vm_map_process_deferred(). This can happen if
the vm_map_remove() triggers the OOM killer.
jhb [Fri, 29 Jun 2012 16:30:15 +0000 (16:30 +0000)]
MFC 237008,237271,237272,237673:
- Fix a couple of bugs that prevented windows in PCI-PCI bridges from
growing "downward" (moving the start address down). First, an off by
one error caused the end address to be moved down an extra alignment
chunk unnecessarily. Second, when aligning the new candidate starting
address, the wrong bits were masked off.
- Add a 'wmask' variable to hold the expression '(1ul << w->step) - 1' in
pcib_grow_window().
- For subtractively decoding bridges, don't try to grow windows but pass
the request up the tree in order to be on the safe side. Growing windows
in this case would mean to switch resources to positive decoding and
it's unclear how to correctly handle this. At least with ALi/ULi M5249
PCI-PCI bridges, this also just doesn't work out of the box.
pfg [Fri, 29 Jun 2012 03:03:42 +0000 (03:03 +0000)]
MFC r237448:
Merge changes from upstream libedit.
Here we update most of the files to at least match the
version available in NetBSD's snapshot of 20091228. This
version was chosen because it still doesn't include wide
character support (UTF-8), which involves many changes and
new files.
jhb [Thu, 28 Jun 2012 21:24:56 +0000 (21:24 +0000)]
MFC 228161,230774,230822,236415:
Add a new -e flag to pciconf(8)'s list mode to display PCI error details.
Currently this dumps the status of any error bits in the PCI status register
and PCI-express device status register. It also lists any errors indicated
by version 1 of PCI-express Advanced Error Reporting (AER).
kib [Thu, 28 Jun 2012 16:54:10 +0000 (16:54 +0000)]
MFC r237366:
Fix unbounded-length malloc, controlled from usermode. The added check
is performed before exact size of the buffer is calculated, but the
buffer cannot have size greater then the total space allocated for
extended attributes. The existing check is executing with precise
size, but it is too late, since buffer needs to be allocated in
advance.
Also, adapt to uio_resid being of ssize_t type. Use lblktosize instead of
multiplying by fs block size by hand as well.
pfg [Thu, 28 Jun 2012 01:04:59 +0000 (01:04 +0000)]
MFC r237406:
Bring a couple of fixes for gcc optimizations.
The GCC4.3 branch contains some optimization fixes
that were not considered regressions and therefore
were never backported. We are bringing a couple of
them that are under GPLv2 since they were made
before the license switch upstream.
jhb [Wed, 27 Jun 2012 21:13:00 +0000 (21:13 +0000)]
MFC 233925,236357:
Add new ktrace records for the start and end of VM faults. This gives
a pair of records similar to syscall entry and return that a user can
use to determine how long page faults take. The new ktrace records are
enabled via the 'p' trace type, but are not enabled in the default set of
trace points.
mm [Wed, 27 Jun 2012 12:00:35 +0000 (12:00 +0000)]
MFC r236823 (pjd):
ds_guid of 0 is special, as it is used by snapshot receive code to
differentiate between an incremental and full stream.
Be sure not to generate guid equal to 0.
Reported by: someone who saw 0 being generated as 64bit random guid
mav [Wed, 27 Jun 2012 11:04:04 +0000 (11:04 +0000)]
MFC r237398:
In camisr() clear CAM_SIM_ON_DONEQ flag after camisr_runqueue() purged SIM
done queue. Clearing it before caused extra SIM queueing in some cases.
It was invisible during normal operation, but during USB device unplug and
respective SIM destruction it could keep pointer on SIM without having
counted reference and as result crash the system by use afer free.
delphij [Wed, 27 Jun 2012 00:34:06 +0000 (00:34 +0000)]
MFC r237339:
Polish previous revision: if the fts_* routines have lstat()'ed the
directory entry then use the struct stat from that instead of doing
it again, and skip the rm_overwrite() call if fts_read() indicated
that the entry couldn't be a regular file.
Obtained from: OpenBSD
MFC r237284 (kevlo):
Fix potential symlink race condition in "rm -P" by adding a check
that the file we have opened is the one we expected. Also open in
non-blocking mode to avoid a potential hang with FIFOs.
eadler [Tue, 26 Jun 2012 03:05:42 +0000 (03:05 +0000)]
MFC r237259 r237260 r237329:
Allow users with RO privilege to the device to read the RO attributes. [0]
Add __unused macros to appropriate places in order to allow building
with WARNS=6 on base gcc, gcc46, and clang
mav [Mon, 25 Jun 2012 07:11:03 +0000 (07:11 +0000)]
MFC r237460:
Return CAM_SEL_TIMEOUT and CAM_DEV_NOT_THERE instead of CAM_TID_INVALID
and CAM_LUN_INVALID for case of missing devices. In removes tons of error
messages from CAM during bus scans.
Reported and tested by: Mike Tancsa <mike@sentex.net>
davide [Sat, 23 Jun 2012 17:42:37 +0000 (17:42 +0000)]
MFC r237195:
The variable 'error' in sys_poll() is initialized in declaration to value
zero but in any case is overwritten by successive copyin(), making the
previous initialization useless. Remove this.
As an added bonus this fixes a style(9) bug.
mav [Sat, 23 Jun 2012 07:46:33 +0000 (07:46 +0000)]
MFC r237335:
Check status of cam_periph_hold() inside cdclose(). If cd device was
invalidated while open, cam_periph_hold() will return error and won't
get the reference. Following reference release will crash the system.
delphij [Sat, 23 Jun 2012 00:37:32 +0000 (00:37 +0000)]
MFC r237348:
Currently the code uses gzFile * for a zlib file descriptor, which
is not correct. The code works by accident because gzFile is
currently defined as void *, and internally it would be casted from
or to its real type.
A newer version of zlib will instead define it as a pointer to a
specific type pointer (namely, struct gzFile_s *). This therefore
would cause stricter checks and compiler would catch this type
mismatch.
This change does not cause any changes to the resulting binary,
as validated with md5(1).