mav [Mon, 5 Oct 2015 08:51:20 +0000 (08:51 +0000)]
MFC r287499: Move setting of media parameters inside open routines.
This is preparation for possibility to open/close media several times
per LUN life cycle. While there, rename variables to reduce confusion.
As additional bonus this allows to open read-only media, such as ZFS
snapshots.
mav [Mon, 5 Oct 2015 08:43:47 +0000 (08:43 +0000)]
MFC r286807: Move "ioctl" CAM frontend into separate file.
It has nothing to share with too huge ctl.c other then device descriptor,
but even that may be counted as design error that may be fixed later.
At some point we may even want to have several ioctl ports.
mav [Mon, 5 Oct 2015 08:42:43 +0000 (08:42 +0000)]
MFC r286806: Drop "internal" CTL frontend.
Its idea was to be a simple initiator and execute several commands from
kernel level, but FreeBSD never had consumer for that functionality,
while its implementation polluted many unrelated places.
mav [Mon, 5 Oct 2015 08:41:32 +0000 (08:41 +0000)]
MFC r286406, r286414:
Wrap some unused functions with notyet, it is necessary to be able to
build the modules/ctl directly.
Remove a dead MALLOC_DEFINE.
mav [Mon, 5 Oct 2015 08:33:41 +0000 (08:33 +0000)]
MFC r285510:
Switch initiator IDs in target mode to the same address space as target
IDs in initiator mode -- index in port database instead of handlers.
This makes initiator IDs persist across role changes and firmware resets,
when handlers previously assigned by firmware are lost and reused.
mav [Mon, 5 Oct 2015 08:30:49 +0000 (08:30 +0000)]
MFC r285155:
Make first step toward supporting target and initiator roles same time.
To avoid conflicts between target and initiator devices in CAM, make
CTL use target ID reported by HBA as its initiator_id in XPT_PATH_INQ.
That target ID is known to never be used for initiator role, so it won't
conflict. For Fibre Channel and FireWire HBAs this specific ID choice
is irrelevant since all target IDs there are virtual. Same time for SPI
HBAs it seems could be even requirement to use same target ID for both
initiator and target roles.
While there are some more things to polish in isp(4) driver, first tests
of using both roles same time on the same port appeared successfull:
# camcontrol devlist -v
scbus0 on isp0 bus 0:
<FREEBSD CTLDISK 0001> at scbus0 target 1 lun 0 (da20,pass21)
<> at scbus0 target 256 lun 0 (ctl0)
<> at scbus0 target -1 lun ffffffff (ctl1)
mav [Mon, 5 Oct 2015 08:29:31 +0000 (08:29 +0000)]
MFC r285154: Remove extra level of target ID indirection (isp_dev_map).
FreeBSD never had limitation on number of target IDs, and there is no
any other requirement to allocate them densely. Since slots of port
database already populated just sequentially, there is no much need
for another indirection to allocate sequentially too.
mav [Mon, 5 Oct 2015 08:14:27 +0000 (08:14 +0000)]
MFC r273051 (by imp):
Use the C99 flexible array construct to denote a variable amount of
data rather than the old-school [1] construct. We have required c99
compilers for some time.
mav [Mon, 5 Oct 2015 08:13:29 +0000 (08:13 +0000)]
MFC r271731 (by will): Fix a kernel panic when unloading isp(4).
In the current implementation, the isp_kthread() threads never exit.
The target threads do have an exit mode from isp_attach(), but it is
not invoked from isp_detach().
Ensure isp_detach() notifies threads started for each channel, such
that they exit before their parent device softc detaches, and thus
before the module does. Otherwise, a page fault panic occurs later in:
For isp_kthread() (and isp(4) target threads), td->td_wmesg references
now-unmapped memory after the module has been unloaded. These threads
are typically msleep()ing at the time of unload, but they could also
attempt to execute now-unmapped code segments.
mav [Mon, 5 Oct 2015 07:40:18 +0000 (07:40 +0000)]
MFC r281531 (by asomers):
Initialize async_arg_ptr in xpt_async when called with async_code
AC_ADVINFO_CHANGED.
Without this change, newly inserted hard disks won't always have their
physical path device nodes created. The problem reproduces most readily
when attaching a large number of disks at once.
mav [Mon, 5 Oct 2015 07:36:16 +0000 (07:36 +0000)]
MFC r280388 (by benno): Be consistent with M_ZERO when allocating ccbs.
There are four places, all in cam_xpt.c, where ccbs are malloc'ed. Two of
these use M_ZERO, two don't. The two that don't meant that allocated ccbs
had trash in them making it hard to debug errors where they showed up. Due
to this, use M_ZERO all the time when allocating ccbs.
mav [Mon, 5 Oct 2015 07:10:09 +0000 (07:10 +0000)]
MFC r277440 (by will):
Restore the CAM XPT peripheral generation counter, and export it via sysctl.
Define it as an atomic uint32_t. These increments happen infrequently
enough for the atomic overhead to be a problem, and since they're now
independent atomics, they won't contend with xpt_lock_buses().
This counter is useful as a means of cheaply identifying whether any changes
have been made to the CAM peripheral list. Userland programs have no guarantee
that the counter won't change on them while being returned or while processing
the information, so they must be written accordingly.
mav [Mon, 5 Oct 2015 07:07:37 +0000 (07:07 +0000)]
MFC r277101 (by imp):
Explain a bit of tricky code dealing with trims and how it prevents
starvation. These side effects aren't obvious without extremely
careful study, and are important to do just so.
peter [Mon, 5 Oct 2015 01:25:51 +0000 (01:25 +0000)]
Fix broken build, again.
cddl/contrib/opensolaris/uts/common/fs/zfs/bqueue.c wasn't added to
conf/files in r286705 and was fixed by r286718. The broken
version was MFCed by r288571.
mav [Sat, 3 Oct 2015 11:43:54 +0000 (11:43 +0000)]
MFC r288064 (by avg): 6220 memleak in l2arc on debug build
illumos/illumos-gate/commit/c546f36aa898d913ff77674fb5ff97f15b2e08b4
https://www.illumos.org/issues/6220
5408 introduced a memleak in l2arc, namely the member b_thawed gets leaked
when an arc_hdr is realloced from full to l2only.
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Arne Jansen <sensille@gmx.net>
mav [Sat, 3 Oct 2015 11:38:10 +0000 (11:38 +0000)]
MFC r287706 (by delphij):
6214 zpools going south
In r286570 (MFV of r277426) an unprotected write to b_flags to
set the compression mode was introduced. This would open a race
window where data is partially decompressed, modified, checksummed
and written to the pool, resulting in pool corruption due to the
partial decompression.
How many demand read didn't have to wait for I/O
because of predictive prefetch. (more is better)
zfetch kstats have been similified to hits, misses, and max_streams,
with max_streams representing times when we were not able to create
new stream because we already have the maximum number of sequences
for a file.
The sysctl variable/loader tunable vfs.zfs.zfetch.block_cap have been
replaced by vfs.zfs.zfetch.max_distance, which controls maximum bytes
to prefetch per stream.
This change reduces compiler warnings by removing duplicate defines
Line numbers are from r168404 (and r284648)
#define lbolt: lines 384 and 459 (531 and 648) (original was renamed later)
#define lbolt64: lines 385 and 460 (532 and 649) (original was renamed later)
#define gethrestime_sec: lines 390 and 465 (540 and 653)
uint64_t physmem: lines 402 and 463 (561 and 651)
mav [Sat, 3 Oct 2015 11:24:47 +0000 (11:24 +0000)]
MFC r287283 (by delphij):
Fix a buffer overrun which may lead to data corruption, introduced in
r286951 by reinstating changes in r274628.
In l2arc_compress_buf(), we allocate a buffer to stash away the compressed
data in 'cdata', allocated of l2hdr->b_asize bytes.
We then ask zio_compress_data() to compress the buffer, b_l1hdr.b_tmp_cdata,
which is of l2hdr->b_asize bytes, and have the compressed size (or original
size, if compress didn't gain enough) stored in csize.
To pad the buffer to fit the optimal write size, we round up the compressed
size to L2 device's vdev_ashift.
Illumos code rounds up the size by at most SPA_MINBLOCKSIZE. Because we
know csize <= b_asize, and b_asize is integer multiple of SPA_MINBLOCKSIZE,
we are guaranteed that the rounded up csize would be <= b_asize. However,
this is not necessarily true when we round up to 1 << vdev_ashift, because
it could be larger than SPA_MINBLOCKSIZE.
So, in the worst case scenario, we are overwriting at most
(1 << vdev_ashift - SPA_MINBLOCKSIZE)
bytes of memory next to the compressed data buffer.
Andriy's original change in r274628 reorganized the code a little bit,
by moving the padding to after we determined that the compression was
beneficial. At which point, we would check rounded size against the
allocated buffer size, and the buffer overrun would not be possible.
mav [Sat, 3 Oct 2015 11:23:08 +0000 (11:23 +0000)]
MFC r287280 (by delphij):
In r286705 (Illumos 5960/a2cdcdd), a separate thread is created with curproc
as parent. In the case of a send or receive, the curproc would be the
userland application that issues the ioctl. This would trigger an assertion
failure introduced in Solaris compatibility shims in r196458 when kernel is
compiled with INVARIANTS.
Fix this by using p0 (proc0 or kernel) as the parent thread when creating
the kernel threads.
mav [Sat, 3 Oct 2015 11:21:50 +0000 (11:21 +0000)]
MFC r287103 (by avg): 5692 expose the number of hole blocks in a file
FreeBSD porting notes:
- only kernel-side changes are merged
- the new ioctl is not actually implemented yet
- thus, the goal is to synchronize DMU code
https://www.illumos.org/issues/5692
we would like to expose the number of hole (sparse) blocks in a file.
this can be useful to for example if you want to fill in the holes with
some data; knowing the number of holes in advances allows you to report
progress on hole filling. We could use SEEK_HOLE to do that but it would
be O(n) where n is the number of holes present in the file.
Author: Max Grossman <max.grossman@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
mav [Sat, 3 Oct 2015 11:16:42 +0000 (11:16 +0000)]
MFC r286774: 2618 arc.c mistypes in the comments
Reviewed by: Jason King <jason.brian.king@gmail.com>
Reviewed by: Josef Sipek <jeffpc@josefsipek.net>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Bart Coddens <bart.coddens@gmail.com>
As a way to make it more difficult to introduce bugs into the ARC, and to
make it easier to diagnose issues when bugs do creep in, it would be
beneficial to change the type of the arc_state_t's arcs_size field to be
a refcount_t instead of a uint64_t. This would allow us to make stricter
checks when incrementing and decrementing the value with debugging enabled,
but still fallback to simple, fast atomic operations when debugging is
disabled.
https://www.illumos.org/issues/6033
When we're looking for the list containing oldest buffer we never
actually look at the MFU lists even when we try to evict from MFU.
looks like a copy paste error, the fix is here:
mav [Sat, 3 Oct 2015 11:11:56 +0000 (11:11 +0000)]
MFC r286763: 5497 lock contention on arcs_mtx
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
This patch attempts to reduce lock contention on the current arc_state_t
mutexes. These mutexes are used liberally to protect the number of LRU
lists within the ARC (e.g. ARC_mru, ARC_mfu, etc). The granularity at
which these locks are acquired has been shown to greatly affect the
performance of highly concurrent, cached workloads.
mav [Sat, 3 Oct 2015 08:07:21 +0000 (08:07 +0000)]
MFC r286712: 6096 ZFS_SMB_ACL_RENAME needs to cleanup better
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
mav [Sat, 3 Oct 2015 08:06:29 +0000 (08:06 +0000)]
MFC r286710:
6093 zfsctl_shares_lookup should only VN_RELE() on zfs_zget() success
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Dan McDonald <danmcd@omniti.com>
mav [Sat, 3 Oct 2015 08:05:33 +0000 (08:05 +0000)]
MFC r286708: 5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
A ZFS feature flags (large blocks) tracks its refcounts as the number of
datasets that have ever used the feature. Several features of this type
are planned to be added (new checksum functions). This code should be made
common infrastructure rather than duplicating the code for each feature.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
While running 'zfs recv' we noticed that every 128th 8K block required a
read. We were seeing that restore_write() was calling dmu_tx_hold_write()
and the indirect block was not cached. We should prefetch upcoming indirect
blocks to avoid having to go to disk and blocking the restore_write().
Allow an incremental send stream to be received as a clone, even if the
stream does not mark it as a clone.
https://www.illumos.org/issues/5981
When dmu_objset_find_dp gets called with a read lock held, it fans out
the work to the task queue. Each task in turn acquires its own read
lock before calling the callback. If during this process anyone tries
to a acquire a write lock, it will stall all read lock requests.Thus
the tasks will never finish, the read lock of the caller will never
get freed and the write lock never acquired. deadlock.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Arne Jansen <jansen@webgods.de>
https://www.illumos.org/issues/5269
When importing a pool (at boot or with zpool import) with many
filesystem, the process can take minutes. It doesn't matter whether
the pool has been exported cleanly or uncleanly. The problem is that
each dataset has its own log chain. On import, all datasets have to be
checked if there are logs to replay. The idea is to speed up this
process by paralellizing it.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Arne Jansen <jansen@webgods.de>
mav [Sat, 3 Oct 2015 07:57:32 +0000 (07:57 +0000)]
MFC r286683: 5765 add support for estimating send stream size with
lzc_send_space when source is a bookmark
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@nexenta.com>
Author: Max Grossman <max.grossman@delphix.com>
https://www.illumos.org/issues/5695
In dmu_sync_ready(), a hole block pointer will have it's logical size
explicitly set as it's necessary for replay purposes. To "undo" this,
dmu_sync_done() will zero out any hole that it finds. This becomes a
problem when using the "hole_birth" feature, as this will also wipe out
any birth time that might have happened to be set on the hole.
...
As a fix, the logic to zero out a hole is only applied to old style
holes with a birth time of zero. Holes created with the "hole_birth"
feature enabled will have a non-zero birth time, and will be skipped
(thus preserving the ltime, type, and level information as well).
In addition, zdb was updated to also print the ltime, type, and level
information for these new style holes. Previously, only the logical
birth time would be printed.
Author: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
mav [Sat, 3 Oct 2015 07:50:15 +0000 (07:50 +0000)]
MFC r286625:
5376 arc_kmem_reap_now() should not result in clearing arc_no_grow
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Sat, 3 Oct 2015 07:48:25 +0000 (07:48 +0000)]
MFC r286605: 5812 assertion failed in zrl_tryenter(): zr_owner==NULL
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Sat, 3 Oct 2015 07:47:33 +0000 (07:47 +0000)]
MFC r286603: 5810 zdb should print details of bpobj
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Sat, 3 Oct 2015 07:46:03 +0000 (07:46 +0000)]
MFC r286600: 5808 spa_check_logs is not necessary on readonly pools
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Matthew Ahrens <mahrens@delphix.com>
alc [Sat, 3 Oct 2015 07:43:33 +0000 (07:43 +0000)]
MFC r288281
The conversion of kmem_alloc_attr() from operating on a vm map to a vmem
arena in r254025 introduced a bug in the case when an allocation is only
partially successful. Specifically, the vm object lock was not being
acquired before freeing the allocated pages. To address this bug, replace
the existing code by a call to kmem_unback().
Change the type of a variable in kmem_alloc_attr() so that an allocation
of two or more gigabytes won't fail.
Replace the error handling code in kmem_back() by a call to kmem_unback().
mav [Sat, 3 Oct 2015 07:34:21 +0000 (07:34 +0000)]
MFC r286589: 5820 verify failed in zio_done(): BP_EQUAL(bp, io_bp_orig)
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Sat, 3 Oct 2015 07:33:27 +0000 (07:33 +0000)]
MFC r286587: 5746 more checksumming in zfs send
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Sat, 3 Oct 2015 07:32:34 +0000 (07:32 +0000)]
MFC r286579: 5313 Allow I/Os to be aggregated across ZIO priority classes
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Will Andrews <willa@SpectraLogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Justin T. Gibbs <justing@spectralogic.com>
mav [Sat, 3 Oct 2015 07:29:56 +0000 (07:29 +0000)]
MFC r286575: 5056 ZFS deadlock on db_mtx and dn_holds
Reviewed by: Will Andrews <willa@spectralogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Justin Gibbs <justing@spectralogic.com>
Currently, every buffer cached in the L2ARC is accompanied by a 240-byte
header in memory, leading to very high memory consumption when using very
large cache devices. These changes significantly reduce this overhead.
Trunk Optimized
+-----------------+
L1-only | 176 B | 176 B | (same)
+-----------------+
L1 & L2 | 240 B | 208 B | (saved 32 bytes)
+-----------------+
L2-only | 240 B | 128 B | (saved 116 bytes)
+-----------------+
For an average blocksize of 8KB, this means that for the L2ARC, the ratio
of metadata to data has gone down from about 2.92% to 1.56%. For a
'storage optimized' EC2 instance with 1600GB of SSD and 60GB of RAM, this
means that we expect a completely full L2ARC to use (1600 GB * 0.0156) /
60GB = 41% of the available memory, down from 78%.
mav [Sat, 3 Oct 2015 07:25:05 +0000 (07:25 +0000)]
MFC r286551: 5694 traverse_prefetcher does not prefetch enough
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: George Wilson <george.wilson@delphix.com>
mav [Sat, 3 Oct 2015 07:24:12 +0000 (07:24 +0000)]
MFC r286549:
5693 ztest fails in dbuf_verify: buf[i] == 0, due to dedup and bp_override
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
mav [Sat, 3 Oct 2015 07:22:24 +0000 (07:22 +0000)]
MFC r286545:
5630 stale bonus buffer in recycled dnode_t leads to data corruption
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Justin T. Gibbs <justing@spectralogic.com>
mav [Sat, 3 Oct 2015 07:21:27 +0000 (07:21 +0000)]
MFC r286543: 5592 NULL pointer dereference in dsl_prop_notify_all_cb()
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
mav [Sat, 3 Oct 2015 07:20:26 +0000 (07:20 +0000)]
MFC r286541: 5531 NULL pointer dereference in dsl_prop_get_ds()
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Justin T. Gibbs <justing@spectralogic.com>
projects / FreeBSD / stable / 10.git / log