ngie [Thu, 1 Jun 2017 07:08:26 +0000 (07:08 +0000)]
MFC r314579,r314785:
r314579 (by np):
Add cxgbetool(8) to the base system.
Move cxgbetool from tools/tools to usr.sbin. Compile and install it on
platforms where cxgbe(4) is built by default. Knobs (WITH_CXGBETOOL and
WITHOUT_CXGBETOOL) have been added so that the user can override the
default setting.
ngie [Thu, 1 Jun 2017 06:41:27 +0000 (06:41 +0000)]
MFC r318436:
usr.bin/getconf: add some initial tests
Items tested via this commit are:
- Some basic POSIX constants.
- Some valid programming environments with -v.
- Some invalid programming environments via -v.
NOTE: this test makes assumptions about ILP32/LP32 vs LP64 that are
currently not true on all architectures to avoid hardcoding some
architectures in the tests. I'm working on improving getconf(1) to be
more sane about handling ILP32/LP32 vs LP64. Future commits are coming
soon to address this.
ngie [Thu, 1 Jun 2017 06:35:40 +0000 (06:35 +0000)]
MFC r319157:
fma_test: mute a warning about unreachable code on amd64 by restructuring
the #ifdef block to only handle the rest of the logic in the loop in the
#else case.
ngie [Thu, 1 Jun 2017 06:30:22 +0000 (06:30 +0000)]
MFC r318175:
procstat(1): clarify the Signal Disposition section
- Fix a typo (SIGIGN -> SIG_IGN). Use .Dv when referencing SIG_IGN.
- Use semi-colons as soft breaks when separating sentences for
the FLAGS section.
- Tweak wording for C slightly to flow better and to be a bit
more technically correct (signals with handlers installed will
be caught by the target program).
- Reference signal(3) in the SEE ALSO section.
r318515:
The current qsort(3) implementation ignores the sizes of partitions, and
always perform recursion on the left partition, then use a tail call to
handle the right partition. In the worst case this could require O(N)
levels of recursions.
Reduce the possible recursion level to log2(N) by always recursing on the
smaller partition instead.
delphij [Wed, 31 May 2017 06:13:33 +0000 (06:13 +0000)]
MFC r279663,r279666 (pfg):
r279663:
qsort(3): enhance to handle 32-bit aligned data on 64-bit systems
Implement a small enhancement to the original qsort implementation:
If the data is 32 bit aligned we can side-step the long type
version and use int instead.
The change brings a modest but significant improvement in
32 bit workloads.
r315370:
The adj_free and max_free values of new_entry will be calculated and
assigned by subsequent vm_map_entry_link(), therefore, remove the
pointless copying.
asomers [Tue, 30 May 2017 22:54:52 +0000 (22:54 +0000)]
MFC r318189:
vdev_geom may associate multiple vdevs per g_consumer
vdev_geom.c currently uses the g_consumer's private field to point to a
vdev_t. That way, a GEOM event can cause a change to a ZFS vdev. For
example, when you remove a disk, the vdev's status will change to REMOVED.
However, vdev_geom will sometimes attach multiple vdevs to the same GEOM
consumer. If this happens, then geom events will only be propagated to one
of the vdevs.
Fix this by storing a linked list of vdevs in g_consumer's private field.
asomers [Tue, 30 May 2017 22:45:01 +0000 (22:45 +0000)]
MFC r317755, r317758
r317755:
Various Coverity fixes in ifconfig(8)
* Exit early if kldload(2) fails (1011259). This is the only change that
affects ifconfig's behavior.
* Close memory and resource leaks (1305624, 1305205, 1007100)
* Mark usage() as _Noreturn (1305806, 1305750)
* Fix some dereference after null checks (1011474, 270774)
asomers [Tue, 30 May 2017 22:43:08 +0000 (22:43 +0000)]
MFC r316856:
MFV 316855
7900 zdb shouldn't print the path of a znode at verbosity < 5
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alan Somers <asomers@freebsd.org>
asomers [Tue, 30 May 2017 22:41:19 +0000 (22:41 +0000)]
MFC r316760:
Fix vdev_geom_attach_by_guids for partitioned disks
When opening a vdev whose path is unknown, vdev_geom must find a geom
provider with a label whose guids match the desired vdev. However, due to
partitioning, it is possible that two non-synonomous providers will share
some labels. For example, if the first partition starts at the beginning of
the drive, then ada0 and ada0p1 will share the first label. More troubling,
if the last partition runs to the end of the drive, then ada0p3 and ada0
will share the last label. If vdev_geom opens ada0 when it should've opened
ada0p3, then the pool won't be readable. If it opens ada0 when it should've
opened ada0p1, then it will corrupt some other partition when it writes the
3rd and 4th labels.
The easiest way to reproduce this problem is to install a mirrored root pool
with the default partition layout, then swap the positions of the two boot
drives and reboot. Whether the bug manifests depends on the order in which
geom lists its providers, which is arbitrary.
Fix this situation by modifying the search algorithm to prefer geom
providers that have all four labels intact. If no such provider exists, then
open whichever provider has the most.
asomers [Tue, 30 May 2017 22:34:43 +0000 (22:34 +0000)]
MFC r316548:
Quiet 450.status-security when *_inline="YES"
Previously, 450.status-security would always set rc=3 in inline mode,
because it doesn't know whether "periodic security" is going to find
anything interesting. But this annoyingly results in daily reports that
simply say "Security check: \n\n-- End of daily output --".
This change fixes that by testing whether "periodic security" printed
anything, and setting 450.status-security's exit status to 3 if it did. An
alternative would be to change the exit status of periodic(8) to be the
worst of its scripts' exit statuses, but that would be a more intrusive
change.
Reviewed by: brian
Differential Revision: https://reviews.freebsd.org/D10267
r315034:
Document that the msun tests require WARNS=0
ATF tests have a default WARNS of 0, unlike other usermode programs. This
change is technically a noop, but it documents that the msun tests don't
work with any warnings enabled, at least not on all architectures.
asomers [Tue, 30 May 2017 16:15:52 +0000 (16:15 +0000)]
MFC r314148, r314150
r314148:
Misc Coverity fixes in xnb(4)
Most of these are null pointer dereferences or missing error checks in the
unit tests. One is a missing error check in xnb_attach_failed. None can
cause real problems in running systems.
asomers [Tue, 30 May 2017 16:09:54 +0000 (16:09 +0000)]
MFC r313069:
Allow 999.local to run scripts in any language
If one of the scripts listed in (daily|weekly|monthly)_local is executable,
999.local should simply execute it. Only if the script isn't executable
should 999.local assume it needs /bin/sh.
Reviewed by: brian
Sponsored by: Spectra Logic Corp
2. Ensure that nsswitch.conf hosts line contains something like:
hosts: files cache dns
Note that cache must be specified before dns.
3. Start nscd.
4. Run the following command:
while true; do nc -z -w 3 www.google.com 80; sleep 5; done
5. While running the command, remove or comment out all nameserver
statements in /etc/resolv.conf. After a short while you will notice
non-recoverable name rsolution failures.
6. Uncomment or replace all nameserver statements back into
/etc/resolv.conf. Take note that name resolution never recovers.
To recover nscd must be restarted. This patch fixes this.
ngie [Mon, 29 May 2017 06:25:59 +0000 (06:25 +0000)]
MFC r316179,r316180,r316181,r316260:
r316179 (by cem):
t_msgsnd: Use msgsnd()'s msgsz argument correctly to avoid overflow
msgsnd's msgsz argument is the size of the message following the 'long'
message type. Don't include the message type in the size of the message
when invoking msgsnd(2).
ngie [Sun, 28 May 2017 01:14:59 +0000 (01:14 +0000)]
MFC r309412,r316109,r316132:
r309412 (by imp):
dd is currently a bootstrap tool. It really doesn't have any business
being a bootstrap tool. However, for reproducible build output,
FreeBSD added dd status=none because it was otherwise difficult to
suppress the status information, but retain any errors that might
happen. There's no real reason that dd has to be a build tool, other
than we use status=none unconditional. Remove dd from a bootstrap tool
entirely by only using status=none when available. This may also help
efforts to build the system on non-FreeBSD hosts as well.
r316109:
Don't hardcode input files for stage 1/2 bootloaders; use .ALLSRC instead
This is a better pattern to follow when creating the bootloaders and doing
the relevant space checks to make sure that the sizes aren't exceeded (and
thus, copy-pasting is a bit less error prone).
r316132:
Parameterize out 7680 (15 * 512) as BOOT2SIZE, similar to sys/boot/i386/zfsboot/...
This is being done to make it easier to change in the future--this action might be
needed sooner rather than later because of gcc 6.3.0 bailing, stating that there
is negative free space left (deficit) in the boot2 bootloader.
ngie [Sun, 28 May 2017 00:47:02 +0000 (00:47 +0000)]
MFC r316131:
Fix up r316081 by using nitems(cam_errbuf) instead of sizeof(cam_errbuf)
Part of my original reasoning as far as converting the snprintf
calls was to permit switching over from char[] to wchar_t[] in the
future, as well as futureproof in case cam_errbuf's size was ever
changed.
Unfortunately, my approach was bugged because it conflated the
number of items with the size of the buffer, instead of the number of
elements being a fixed size != 1 byte.
Use nitems(..) instead which counts the quantity of items of a specific
type, as opposed to an unqualified sizeof(..) (which assumes that the
number of characters is equal to the buffer size).
Fix -Wimplicit-function-declaration compilation warning by moving libgeom.h
#include below the stdio.h #include.
gctl_dump(3) needs stdio.h, per reasoning noted in r317289.
PR: 218809
r317291:
Rename gctl.t to gctl_test.t and test.c to gctl_test_helper.c
This is being done to reduce ambiguity and to make the tests more portable
in the future to other locations in the source tree.
r317292:
gctl_test.t: use make to compile gctl_test_helper instead of calling cc directly
r317293:
gctl_test_helper: apply polish
- Staticize variables to fix warnings.
- Sprinkle asserts around for calls that can fail
- Apply style(9) for main(..) definition.
- ANSIify usage(..) definition.
r317294:
Bump WARNS to 6 per previous commits which fixed warnings
Tested with: clang (4.0), gcc (4.2.1, 6.3.0)
r317295:
The GPT class no longer exists; use the PART class instead
r317304:
gctl_test_helper: add diagnostic output for parse_retval(..)
This will help end-users better diagnose issues with the function.
r317306:
gctl_test.t: minor tweaks
- Declare $count with the `my` scope operator to permit `use strict`.
- Add `use strict`.
- Use `use warnings` instead of using `-w` in the shebang.
- Don't unlink $cmd when done (prevents unnecessary rebuilding).
- Improve the error message when running with insufficient permissions, e.g.,
non-root.
r317307:
Use verb=delete not verb=remove
The `remove` verb hasn't been present in geom_part*(4) for well
over a decade, if ever. I couldn't find any references to it in
^/stable/5 at least, which is around the timeframe that this test
was written.
r317308:
gctl_test.t: more tweaks to try and update the code and get it functional (again?)
- Make the logfile for $out be built off the basename for $cmd, instead of $cmd.
(r317292 broke this assumption).
- Rename $mntpt to $mntpt_prefix for clarity, as this variable is a prefix for
mountpoints.
- Reindent the umount directive block while here to match the rest of the code.
r317309:
gctl_test.t: improve error reporting with mdcfg and mount directives
If the commands had failed previously, it would press on and result in a
series of cascading failures. Fail early and continue on to the next case
instead of executing additional commands after a previously failed series
of steps.
ngie [Sat, 27 May 2017 23:26:10 +0000 (23:26 +0000)]
MFC r316099:
lib/libkvm: start adding basic tests for kvm(3)
- kvm_close: add a testcase to verify support for errno = EINVAL / -1
(see D10065) when kd == NULL is provided to the libcall.
- kvm_geterr:
-- Add a negative testcase for kd == NULL returning "" (see D10022).
-- Add two positive testcases:
--- test the error case using kvm_write on a O_RDONLY descriptor.
--- test the "no error" case using kvm_read(3) and kvm_nlist(3) as
helper routines and by injecting a bogus error message via
_kvm_err (an internal API) _kvm_err was used as there isn't a
formalized way to clear the error output, and because
kvm_nlist always returns ENOENT with the NULL terminator today.
- kvm_open, kvm_open2:
-- Add some basic negative tests for kvm_open(3) and kvm_open2(3).
Testing positive cases with a specific
`corefile`/`execfile`/`resolver` requires more work and would require
user intervention today in order to reliably test this out.
MFC note:
lib/libkvm/kvm_open2_test is not compiled/tested because ^/stable/10
lacks the kvm_open2(3) libcall.
ngie [Sat, 27 May 2017 23:04:48 +0000 (23:04 +0000)]
MFC r318546:
sys/fs/tmpfs/vnd_test: make md(4) allocation dynamic
The previous logic was flawed in the sense that it assumed that /dev/md3
was always available. This was a caveat I noted in r306038, that I hadn't
gotten around to solving before now.
Cache the device for the mountpoint after executing mdmfs, then use the
cached value in basic_cleanup(..) when unmounting/disconnecting the md(4)
device.
Apply sed expressions to use reuse logic in the NetBSD code that could
also be applied to FreeBSD, just with different tools.
ngie [Sat, 27 May 2017 22:57:07 +0000 (22:57 +0000)]
MFC r317288,r317289:
r317288:
libgeom(3): apply minor polish
- Use .Dv when mentioning NULL per mdoc(7).
- Reword `g_device_path`, `g_open_by_ident`, and `g_providername`'s descriptions
so they're less wordy.
- Fix a typo in `g_device_path` (can not -> cannot).
Tested with: igor, make manlint
r317289:
libgeom(3): note that stdio.h is required when referencing gctl_dump(3)
gctl_dump(3) is only exposed when stdio.h is #include'd first, per its
addition in r112510. The reasoning noted for the conditional "exposure"
of the function was to "limit #include pollution".
This addresses an issue I found with the documentation when looking at
bug 218809, which in turn addresses a -Wimplicit-function-declaration
compiler warning in `tools/regression/geom_gpt/test.c` (it uses
gctl_dump(3)).
hselasky [Sat, 27 May 2017 08:27:11 +0000 (08:27 +0000)]
MFC r318820:
Increase the allowed maximum number of audio channels from 31 to 127
in the PCM feeder mixer. Without this change a value of 32 channels is
treated like zero, due to using a mask of 0x1f, causing a kernel
assert when trying to playback bitperfect 32-channel audio. Also
update the AWK script which is generating the division tables to
handle more than 18 channels. This commit complements r282650.
hselasky [Sat, 27 May 2017 08:17:59 +0000 (08:17 +0000)]
MFC r318353:
Avoid use of contiguous memory allocations in busdma when possible.
This patch improves the boundary checks in busdma to allow more cases
using the regular page based kernel memory allocator. Especially in
the case of having a non-zero boundary in the parent DMA tag. For
example AMD64 based platforms set the PCI DMA tag boundary to
PCI_DMA_BOUNDARY, 4GB, which before this patch caused contiguous
memory allocations to be preferred when allocating more than PAGE_SIZE
bytes. Even if the required alignment was less than PAGE_SIZE bytes.
This patch also fixes the nsegments check for using kmem_alloc_attr()
when the maximum segment size is less than PAGE_SIZE bytes.
Updated some comments describing the code in question.
gjb [Fri, 26 May 2017 19:02:46 +0000 (19:02 +0000)]
MFC r314935 (thompsa):
Change ec2.conf to use the pkg tool from a chroot rather than trying
to bootstrap it and fail from the livecd readonly filesystem.