MFC r263678: lldb: Invoke PT_KILL from ProcessPosix::DoDestroy
We previously sent SIGKILL to the debuggee in DoDestroy, but did not
actually detach or kill via ptrace. It seems that this somehow didn't
matter on Linux, but did on FreeBSD.
This would happen when quitting LLDB while stopped at a breakpoint, for
example. The debuggee remained stopped in ptrace (with the signal
either pending or lost). After a timeout of a second or two LLDB exits,
which caused the debuggee to resume and dump core from an unhandled
SIGTRAP.
BringProcessIntoLimbo is a poorly named wrapper for ptrace(PT_KILL)
which is the desired behaviour from DoDestroy.
Omit "too many sections" warnings if the ELF file is not dynamically
linked (and is therefore skipped anyway), and otherwise output it only
once. An errant core file would previously cause kldxref to output a
number of warnings.
Also introduce a MAXSEGS #define and replace literal 2 with it, to make
comparisons clear.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
MFC r265477: Merge -fstandalone-debug from Clang r198655:
Implement a new -fstandalone-debug option. rdar://problem/15685848
It controls everything that -flimit-debug-info used to, plus the
vtable type optimization. The old -fno-limit-debug-info option is now an
alias to -fstandalone-debug and vice versa.
Standalone is the default on Darwin until dtrace is updated to work with
non-standalone debug info (rdar://problem/15758808).
Note: I kept the LimitedDebugInfo name in CodeGenOptions::DebugInfoKind
because NoStandaloneDebugInfo sounded even more confusing.
Debug info: Support variadic functions.
Variadic functions have an unspecified parameter tag after the last
argument. In IR this is represented as an unspecified parameter in the
subroutine type.
MFC 266424,266476,266524,266573,266595,266626,266627,266633,266641,266642,
266708,266724,266934,266935,268521:
Emulation of the "ins" and "outs" instructions.
Various fixes for translating guest linear addresses to guest physical
addresses.
MFC r268642:
libc/gen: small updates to code originating at OpenBSD
arc4random.c
- CVS rev. 1.22
Change arc4random_uniform() to calculate ``2**32 % upper_bound'' as
``-upper_bound % upper_bound''. Simplifies the code and makes it the
same on both ILP32 and LP64 architectures, and also slightly faster on
LP64 architectures by using a 32-bit remainder instead of a 64-bit
remainder.
- CVS rev. 1.23
Spacing
readpassphrase.c
-CVS rev. v 1.24
most obvious unsigned char casts for ctype
MFC 264353,264509,264768,264770,264825,264846,264988,265114,265165,265365,
265941,265951,266390,266550,266910:
Various bhyve fixes:
- Don't save host's return address in 'struct vmxctx'.
- Permit non-32-bit accesses to local APIC registers.
- Factor out common ioport handler code.
- Use calloc() in favor of malloc + memset.
- Change the vlapic timer frequency to be in the ballpark of contemporary
hardware.
- Allow the guest to read the TSC via MSR 0x10.
- A VMCS is always inactive when it exits the vmx_run() loop. Remove
redundant code and the misleading comment that suggest otherwise.
- Ignore writes to microcode update MSR. This MSR is accessed by RHEL7
guest.
Add KTR tracepoints to annotate wrmsr and rdmsr VM exits.
- Provide an alias for the userboot console and name it 'comconsole'.
- Use EV_ADD to create an mevent and EV_ENABLE to enable it.
- abort(3) the process in response to a VMEXIT_ABORT.
- Don't include the guest memory segments in the bhyve(8) process core dump.
- Make the vmx asm code dtrace-fbt-friendly.
- Allow vmx_getdesc() and vmx_setdesc() to be called for a vcpu that is in
the VCPU_RUNNING state.
- Enable VMX in the IA32_FEATURE_CONTROL MSR if it not enabled and the MSR
isn't locked.
MFC 260847,264055,264867:
- Add a very simple virtio_random(4) driver for FreeBSD guests to harvest
entropy from hypervisors.
- Add support to bhyve for the virtio RNG entropy-source device to provide
entry to bhyve guests.
Use NULL instead of 0 (Patch by Sascha Wildner <saw at online.de> for Dragonfly)
Remove unnecessary semicolons (Patch by Sascha Wildner <saw at online.de> for Dragonfly)
Add support for arbitrary http requests [1]
Support EAGAIN in fetch_writev
Submitted by: Alex Hornung <alex at alexhornung.com> [1]
Reviewed by: des
MFC 263432,265366,265376:
Fixes for vcpu management in bhyve:
- Use 'cpuset_t' to represent the vcpus active in a virtual machine.
- Modify the "-p" option to be more flexible when associating a 'vcpu' with
a 'hostcpu'.
MFC 262884,263236,265407:
Various uart fixes:
- Open the uart emulation's backing tty in non-blocking mode.
- Support 16-bit register access.
- Disable the 'uart_drain()' callback when the emulated receive FIFO
is full.
MFC 259942,262274,263035,263054,263211,263744,264179,264324,264468,264631,
264648,264650,264651,266572,267558:
Flesh out the AT PIC and 8254 PIT emulations and move them into the kernel.
MFC 261904,261905,262143,262184,264921,265211,267169,267292,267294:
Various PCI fixes:
- Allow PCI devices to be configured on all valid bus numbers from 0 to 255.
- Tweak the handling of PCI capabilities in emulated devices to remove
the non-standard zero capability list terminator.
- Add a check to validate that memory BARs of passthru devices are 4KB
aligned.
- Respect and track the enable bit in the PCI configuration address word.
- Handle quad-word access to 32-bit register pairs.
MFC r268735:
Improve support for Intel Lynx Point USB 3.0 controllers by using the
USB 2.0 port mask in addition to the USB 3.0 port mask. The hardware
does not always accept when writing -1U to the port switching
registers.
dim [Sat, 19 Jul 2014 18:33:09 +0000 (18:33 +0000)]
MFC r268774:
After r261991, clang warnings about unused functions in the kernel were
completely silenced. Make sure these warnings appear again, so there is
some incentive to fix them, but do not error out the whole kernel build
for them.
>r267118 | imp | 2014-06-05 11:13:42 -0600 (Thu, 05 Jun 2014) | 9 lines
>The code that combines adjacent ranges for BIO_DELETEs to optimize
>trims to the device assumes the list is sorted. Don't apply the
>optimization of not sorting the queue when we have SSDs to the
>delete_queue, since it causes more discard traffic to the drive. While
>one could argue that the higher levels should coalesce the trims,
>that's not done today, so some optimization at this level is needed.
>CR: https://phabric.freebsd.org/D142
>r268205 | imp | 2014-07-02 23:22:13 -0600 (Wed, 02 Jul 2014) | 9 lines
>Rework the BIO_DELETE code slightly. Always queue the BIO_DELETE
>requests on the trim_queue, even for the CFA ERASE. This allows us, in
>the future, to collapse adjacent requests. Since CFA ERASE is only for
>CF cards, and it is so restrictive in what it can do, the collapse
>code is not presently here. This also brings the ada driver more in
>line with the da driver's treatment of BIO_DELETEs.
>r263749 | imp | 2014-03-25 16:08:31 -0600 (Tue, 25 Mar 2014) | 18 lines
>Rather than require a makeoptions DEBUG to get debug correct,
>add it in kern.mk, but only if we're using clang. While this
>option is supported by both clang and gcc, in the future there
>may be changes to clang which change the defaults that require
>a tweak to build our kernel such that other tools in our tree
>will work. Set a good example by forcing -gdwarf-2 only for
>clang builds, and only if the user hasn't specified another
>dwarf level already. Update UPDATING to reflect the changed
>state of affairs. This also keeps us from having to update
>all the ARM kernels to add this, and also keeps us from
>in the future having to update all the MIPS kernels and is
>one less place the user will have to know to do something
>special for clang and one less thing developers will need
>to do when moving an architecture to clang.
- Fix handling of "new" style of ioctl in compatiblity mode [1];
- Reorganize code and reduce diff from upstream;
- Improve forward compatibility shims for previous kernel;
tty.c 1.31
handle EINTR in the termios operations
Allow a single process to control multiple ttys (for pthreads using _REENTRANT)
using multiple EditLine objects.
pass lint on _LP64.
Don't depend on side effects inside an assert
MFC r268582:
Fix performance problems with AXGE network adapter in RX direction:
- Remove 4 extra bytes from the ethernet payload.
- The maximum RX buffer was incorrectly set. Increase it to 64K for
now, until the exact limit is understood.
- Enable hardware checksumming again.
- Make hardware data structure packed.
Improve markup, change references to nonexistent vt_vga(4), remove some
language redundancy, and move the examples so sections are in the
standard order.
MFC r268370:
Make XPT_GET_TRAN_SETTINGS to report CAM that command queueing is enabled,
but make couple changes to handle non-queued commands too, if happen.
MFC r268326:
Make iSCSI initiator keep Initiator Session ID (ISID) across reconnects.
Previously ISID was changed every time, that made impossible correct
persistent reservation, because reconnected session was identified as
completely new one.
MFC r268418:
Enable TAS feature: notify initiator if its command was aborted by other.
That should make operation more kind to multi-initiator environment.
Without this, other initiators may find out that something bad happened
to their commands only via command timeout.
MFC r268362:
Teach ctl_add_initiator() to dynamically allocate IIDs from pool.
If port passed negative IID value, the function will try to allocate IID
from the pool of unused, based on passed wwpn or name arguments. It does
all its best to make IID unique and persistent across reconnects.
This makes persistent reservation properly work for iSCSI. Previously,
in case of reconnects, reservation could be unexpectedly lost, or even
migrate between intiators.
MFC r268356, r268357:
When new connection comes in, check whether we already have session from
the same intiator (Name+ISID). If so -- terminate the old session and let
the new one take its place, as required by iSCSI RFC.
MFC r268293:
Burry devid port method, which was a gross hack.
Instead make ports provide wanted port and target IDs, and LUNs provide
wanted LUN IDs. After that core Device ID VPD code only had to link all
of them together and add relative port and port group numbers.
LUN ID for iSCSI LUNs no longer created by CTL, but by ctld, and passed
to CTL as "scsiname" LUN option. This makes LUNs to report the same set
of IDs, independently from the port through which it is accessed, as
required by SCSI specifications.
MFC r268291:
Create separate CTL port for every iSCSI target (and maybe portal group).
Having single port for all iSCSI connections makes problematic implementing
some more advanced SCSI functionality in CTL, that require proper ports
enumeration and identification.
This change extends CTL iSCSI API, making ctld daemon to control list of
iSCSI ports in CTL. When new target is defined in config fine, ctld will
create respective port in CTL. When target is removed -- port will be
also removed after all active commands through that port properly aborted.
This change require ctld to be rebuilt to match the kernel.
As a minor side effect, this allows to have iSCSI targets without LUNs.
While that may look odd and not very useful, that is not incorrect.