As in r315225, discard 3072 bytes of RC4 bytestream instead of 1024.
(This implementation of arc4rand(9) is used by the userland ipftest
utility as it approximates ipfilter kernelspace in userspace.)
PR: 217920
Submitted by: codarren@hackers.mu
Reviewed by: emaste, cem
Approved by: so (implicit, in r315225)
Differential Revision: D11747
Patterned after: r315225
hselasky [Thu, 3 Aug 2017 14:14:13 +0000 (14:14 +0000)]
MFC r312872:
Add support for reading advanced diagnostic counters.
By default reading the diagnostic counters is disabled. The firmware
decides which counters are supported and only those supported show up
in the dev.mce.X.diagnostics sysctl tree.
To enable reading of diagnostic counters set one or more of the
following sysctls to one:
hselasky [Thu, 3 Aug 2017 14:09:36 +0000 (14:09 +0000)]
MFC r312865:
Enforce reading the consumer and producer counters once to ensure
consistent return values from the mlx5e_sq_has_room_for()
function. The two counters are incremented by different threads under
different locks.
hselasky [Thu, 3 Aug 2017 14:05:03 +0000 (14:05 +0000)]
MFC r312536:
Allow transmit packet bufring in software to be disabled.
- Add new sysctl node to control the transmit packet bufring.
- Add optimised version of the transmit routine which output packets
directly to the DMA ring instead of using bufring in case the transmit
lock is congested. This can reduce the number of taskswitches which in
turn influence the overall system CPU usage, depending on the
workload.
- Add " TX" suffix to debug name for transmit mutexes to silence some
witness warnings about aquiring duplicate locks having same name.
hselasky [Thu, 3 Aug 2017 13:57:17 +0000 (13:57 +0000)]
MFC r312527:
Add runtime support for modifying the SQ and RQ completion event
moderation mode. The presence of this feature is indicated through the
firmware capabilities.
marius [Wed, 2 Aug 2017 20:27:30 +0000 (20:27 +0000)]
Apply the other half of merges to sdhci_imx(4) and sdhci_fsl(4) that
somehow stayed local when committing r318198, probably due to the
associated tree conflicts.
While at it, register the dependency of sdhci_fsl(4) on sdhci(4) and
allow the former to be built.
Fix probing FC targets with hard addressing turned on.
This largely reverts FreeBSD SVN change 289937 from October 25th, 2015.
The intent of that change was to keep loop IDs persistent across
chip reinits.
The problem is that the change turned on the PREVLOOP /
PREV_ADDRESS bit (bit 7 in Firmware Options 2), which tells the
Qlogic chip to not participate in the loop if it can't get the
requested loop address. It also turned off soft addressing on 2400
(4Gb) and newer controllers.
The isp(4) driver defaults to loop address 0, and the tape drives
I have tested default to loop address 0 if hard addressing is turned
on. So when hard loop addressing is turned on on the drive, the isp(4)
driver just refuses to participate in the loop.
The solution is to largely revert that change. I left some elements
in place that are related to virtual ports, since they were new.
This does work with IBM tape drives with hard and soft addressing
turned on. I have tested it with 4Gb, 8Gb, and 16Gb controllers.
sys/dev/isp.c:
Largely revert FreeBSD SVN change 289937. I left the
ispmbox.h changes in place.
Don't use the PREV_ADDRESS bit on initialization. It tells
the chip to not participate if it can't get the requested
loop ID.
Do use soft addressing on 2400 and newer chips.
Use hard addressing when the user has requested a specific
initiator ID. (hint.isp.X.iid=N in /boot/loader.conf)
Leave some of the virtual port options from that change in
place, but don't turn on the PREV_ADDRESS bit.
gavin [Wed, 2 Aug 2017 15:13:13 +0000 (15:13 +0000)]
Merge r316113,316184,316413 from head:
- Remove #define PCIS_SERIALBUS_SMBUS_PROGIF, unused since r200091
- Switch device_probe() from large case statement to a lookup table
- Add several missing SMBus controllers
trasz [Tue, 1 Aug 2017 15:51:16 +0000 (15:51 +0000)]
MFC r320359:
Add vfs.nfsd.nfsd_enable_uidtostring, which works just like
vfs.nfsd.nfsd_enable_stringtouid, but in reverse - when set to 1,
it forces the NFSv4 server to return numeric UIDs and GIDs instead
of "user@domain" strings. This helps with clients that can't
translate returned identifiers, eg when rerooting.
The same can be achieved by just never running nfsuserd(8),
but the sysctl is useful to toggle the behaviour back and forth
without rebooting.
MFC r320409:
Revert part of r320359, as suggested by rmacklem@. That case is only used
for nfsuserd -manage-gids and shouldn't depend on sysctl.
MFC r321196:
Rename vfs.nfsd.enable_uidtostring to vfs.nfs.enable_uidtostring.
It applies to both NFS client and NFS server, and is useful for both.
This is different from vfs.nfsd.enable_stringtouid, which is specific
to server side.
marius [Mon, 31 Jul 2017 22:19:39 +0000 (22:19 +0000)]
Update stable/10 from 10.3-STABLE to 10.4-PRERELEASE as part of
the 10.4 release cycle, also belatedly marking the official start
of the code slush.
Set the default mdoc(7) version to 10.4, and update the clang(1)
TARGET_TRIPLE to reflect 10.4. While at it, add missing FreeBSD
major versions to mdoc(7).
This status will be reported if the backend NIC is wireless; it's not
useful. Due to the high frequency of the reporting, this could be
pretty annoying; ignore it.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11651
MFC Note: ${FILES} documentation change omitted since r299094 will
not be MFCed to ^/stable/10 .
MFC r320442:
share/examples/tests/{atf,plain}/Makefile: tweak example Makefile snippets
- Including bsd.own.mk isn't required since no MK_<foo> knobs are being
manipulated.
- Update documentation to note that ${FILES} is installed via bsd.progs.mk,
not bsd.prog.mk.
ethernet: Add ethernet interface attached event and devctl notification.
ifnet_arrival_event may not be adequate under certain situation; e.g.
when the LLADDR is needed. So the ethernet ifattach event is announced
after all necessary bits are setup.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11617
dim [Fri, 28 Jul 2017 18:35:29 +0000 (18:35 +0000)]
MFC r321305:
Fix printf format warning in zfs_module.c
Clang 5.0.0 got better warnings about print format strings using %zd,
and this leads to the following -Werror warning on e.g. arm:
sys/boot/efi/boot1/zfs_module.c:186:18: error: format specifies type 'ssize_t' (aka 'int') but the argument has type 'off_t' (aka 'long long') [-Werror,-Wformat]
"(%lu)\n", st.st_size, spa->spa_name, filepath, EFI_ERROR_CODE(status));
^~~~~~~~~~
Fix this by casting off_t arguments to intmax_t, and using %jd instead.
share/examples/tests/Makefile: clean up example snippets/documentation
- TESTSDIR doesn't need to be specified after r289158.
- Including bsd.own.mk isn't required since no MK_<foo> knobs are being
manipulated.
- TESTS_SUBDIRS should be written out in an append format, one entry
per line, to provide a better, more conflict resistant example.
MFC: r321314
r320062 introduced a bug when doing NFSv4.1 mounts against some non-FreeBSD servers.
r320062 used nm_rsize, nm_wsize to set the maximum request/response sizes for
the NFSv4.1 session. If rsize,wsize are not specified as options, the
value of nm_rsize, nm_wsize is 0 at session creation, resulting in
values for request/response that are too small.
This patch fixes the problem. A workaround is to specify rsize=N,wsize=N
mount options explicitly, so they are set before session creation.
This bug only affects NFSv4.1 mounts against some non-FreeBSD servers.
MFC: r321248
Update the nfsv4 man page to reflect recent changes to support
the newer RFCs (5661 and 7530). The main man changes are for the
case of "numbers in strings" for user/groups that RFC7530 allows
and avoids use of nfsuserd(8).
MFC 321233
Raise the watchdog timer interval to 2 ticks, there by guaranteeing
that it fires between 1ms and 2ms. `
Treat two consecutive occurrences of Heartbeat failures as a legitimate
Heartbeat failure
MFC r320077
Change blist_alloc()'s allocation policy from first-fit to next-fit so
that disk writes are more likely to be sequential. This change is
beneficial on both the solid state and mechanical disks that I've
tested. (A similar change in allocation policy was made by DragonFly
BSD in 2013 to speed up Poudriere with "stressful memory parameters".)
Increase the width of blst_meta_alloc()'s parameter "skip" and the local
variables whose values are derived from it to 64 bits. (This matches the
width of the field "skip" that is stored in the structure "blist" and
passed to blst_meta_alloc().)
Eliminate a pointless check for a NULL blist_t.
Simplify blst_meta_alloc()'s handling of the ALL-FREE case.
Address nearby style errors.
MFC r320417
Address the remaining integer overflow issues with the "skip" parameters
and "next_skip" variables. The "skip" value in struct blist has long been
a 64-bit quantity but various functions have implicitly truncated this
value to 32 bits. Now, all arithmetic involving the "skip" value is 64
bits wide. (This should allow us to relax the size limit on a swap device
in the swap pager.)
Maintain the ability to test this allocator as a user-space application by
including <stdbool.h>.
Remove an unused variable from blst_radix_print().
MFC r320527
Change blst_leaf_alloc() to handle a cursor argument, and to improve
performance.
To find in the leaf bitmap all ranges of sufficient length, use a doubling
strategy with shift-and-and until each bit still set represents a bit
sequence of length 'count', or until the bitmask is zero. In the latter
case, update the hint based on the first bit sequence length not found to
be available. For example, seeking an interval of length 12, the set bits
of the bitmap would represent intervals of length 1, then 2, then 3, then
6, then 12. If no bits are set at the point when each bit represents an
interval of length 6, then the hint can be updated to 5 and the search
terminated.
If long-enough intervals are found, discard those before the cursor. If
any remain, use binary search to find the position of the first of them,
and allocate that interval.
Fix spurious timeouts on commands sent to mps(4) and mpr(4) controllers.
mps_wait_command() and mpr_wait_command() were using getmicrotime() to
determine elapsed time when checking for a timeout in polled mode.
getmicrotime() isn't guaranteed to monotonically increase, and that
caused spurious timeouts occasionally.
Switch to using getmicrouptime(), which does increase monotonically.
This fixes the spurious timeouts in my test case.
- Document /etc/cron.d and /usr/local/etc/cron.d under FILES.
- Reword documentation for -n: add appropriate soft-stop and remove
contraction to appease igor.
Reduce the frequency of hint updates on allocation without incurring
additional allocation overhead. Previously, blst_meta_alloc() updated the
hint after every successful allocation. However, these "eager" hint
updates are of no actual benefit if, instead, the "lazy" hint update at
the start of blst_meta_alloc() is generalized to handle all cases where
the number of available blocks is less than the requested allocation.
Previously, the lazy hint update at the start of blst_meta_alloc() only
handled the ALL-FULL case. (I would also note that this change provides
consistency between blist_alloc() and blist_fill() in that their hint
maintenance is now entirely lazy.)
Eliminate unnecessary checks for terminators in blst_meta_alloc() and
blst_meta_fill() when handling ALL-FREE meta nodes.
Eliminate the field "bl_free" from struct blist. It is redundant. Unless
the entire radix tree is a single leaf, the count of free blocks is stored
in the root node. Instead, provide a function blist_avail() for obtaining
the number of free blocks.
In blst_meta_alloc(), perform a sanity check on the allocation once rather
than repeating it in a loop over the meta node's children.
In blst_leaf_fill(), use the optimized bitcount*() function instead of a
loop to count the blocks being allocated.
MFC r320546
When "force" is specified to pmap_invalidate_cache_range(), the given
start address is not required to be page aligned. However, the loop
within pmap_invalidate_cache_range() that performs the actual cache
line invalidations requires that the starting address be truncated to
a multiple of the cache line size. This change corrects an error in
that truncation.
MFC r320498
Clear the MAP_WIREFUTURE flag on the vm map in exec_new_vmspace() when it
recycles the current vm space. Otherwise, an mlockall(MCL_FUTURE) could
still be in effect on the process after an execve(2), which violates the
specification for mlockall(2).
It's pointless for vm_map_stack() to check the MEMLOCK limit. It will
never be asked to wire the stack. Moreover, it doesn't even implement
wiring of the stack.
- Set BINDIR to TESTSDIR globally (and subsequently, remove all
`${FILESGROUP}DIR` setting because BINDIR is set to `TESTSDIR`)
- Set MAN to "" globally, instead of per-PROG
Add newsyslog capability to write RFC5424 compliant rotation message.
This modification adds the capability to newsyslog to write the
rotation message in a format that is compliant with RFC5424. This
capability is enabled on a per-log file basis through a new value
("T") in the flags field in newsyslog.conf. This is useful on systems
that use the RFC5424 format for log files so that the rotation message
format matches that of the other log messages. There has been recent
mention of adding an RFC5424 compliant mode to syslogd and at least
one alternative system log daemon (rsyslogd) that already has the
capability to use that format.
Relnotes: yes
r319545:
Don't execute the TODO cases in a subshell
This messes up the testcase counter, as seen in bug 219756.
PR: 212160, 219756
r319546:
Fix the testplan after ^/head@r318960
The number of executed testcases is 128, not 126.
MFC with: r318960
r319548:
Remove TODO for sub testcases added for bug 212160
On closer inspection, the past failures no longer occur on ^/head.
PR: 212160
r321261:
Clean up leading whitespace (convert single column spaces to hard tabs)
MFC note: only the newsyslog.conf.d change has been backported to unbreak
"make distribution" with etc/newsyslog.conf.d/opensm.conf
installation. The cron.d and syslog.d changes were omitted by
request to avoid churn on ^/stable/{10,11}.
Requested by: jhb, peter
MFC r318545:
Install {cron.d,newsyslog.conf.d,syslog.d} via `make distribution`, not `make install`
I incorrectly started this pattern in r277541 with the opensm newsyslog.conf.d file,
and continued using it in r318441 and r318443.
This will fix the files being handled improperly via installworld, preventing tools like
etcupdate, mergemaster, etc from functioning properly when comparing the installed
contents on a system vs the contents in a source tree when doing merges.
Check gethostname(2) return code - but even if it succeeds it may not
null terminate.
Temporarily use "From: $user@$hostname" rather than "From: $user".
The latter exposes incompatible behavior if using dma(8). sendmail(8)
(and other alternatives) canonify either form on submission (even
if masquerading), but dma will leak a non-compliant address to
the internet.
Check gethostname(2) return code - but even if it succeeds it may not
null terminate.
Temporarily use "From: $user@$hostname" rather than "From: $user".
The latter exposes incompatible behavior if using dma(8). sendmail(8)
(and other alternatives) canonify either form on submission (even
if masquerading), but dma will leak a non-compliant address to
the internet.
Add the "-n" flag to cron(8), to prevent it from daemonizing.
This makes it possible to use it with external supervisors.
The "-n" flag name is compatible with Linux, NetBSD, and OpenBSD.
r321235:
Fix trivial whitespace bug introduced in usage message changes for -n
support (r304570).
dim [Wed, 19 Jul 2017 18:22:32 +0000 (18:22 +0000)]
Pull in r229281 from upstream libc++ (by Larisse Voufo):
Implement C++14's sized deallocation functions, since there are no
longer implicitly defined by clang, as of r229241.
This allows ports which use C++14's sized deallocation functions, such
as cad/openvsp, to build on stable/10. Bump __FreeBSD_version to allow
detection from ports.
Direct commit, since stable/11 and head already have newer versions of
libc++ which include this change.