mav [Tue, 12 Jun 2012 08:10:14 +0000 (08:10 +0000)]
MFC r236847:
Partially revert r236666:
Return PROTO_ATA protocol in response to XPT_PATH_INQ.
smartmontools uses it to identify ATA devices and I don't know any other
place now where it is important. It could probably use XPT_GDEV_TYPE
instead for more accurate protocol information, but let it live for now.
issyl0 [Mon, 11 Jun 2012 19:09:55 +0000 (19:09 +0000)]
Partial merge of r213507 from head:
In r178993, the ability to view a man page by giving a path to the
man page itself was added, but never documented. Subsequently, the
GNU-licensed man(1) and its man page were replaced by BSD licensed
implementations, and later on this undocumented functionality was
also added to the new BSD-licensed man(1), together with
documentation.
This is a merge of the documentation part of that commit (r213507)
into the GNU-licensed man(1) man page in stable/8, in order to
document the available functionality.
rmacklem [Mon, 11 Jun 2012 13:17:45 +0000 (13:17 +0000)]
MFC: r235381
Fix two cases in the new NFS server where a tsleep() is
used, when the code should actually protect the tested
variable with a mutex. Since the tsleep()s had a 10sec
timeout, the race would have only delayed the allocation
of a new clientid for a client. The sleeps will also
rarely occur, since having a callback in progress when
a client acquires a new clientid, is unlikely.
in practice, since having a callback in progress when
a fresh clientid is being acquired by a client is unlikely.
delphij [Mon, 11 Jun 2012 07:11:34 +0000 (07:11 +0000)]
MFC r236572:
Replace the use of wall clock time with monotonically increasing
clock. In general, gettimeofday() is not appropriate interface
when accounting for elasped time because it can go backward, in
which case the policy code could errornously consider the limit
as exceeded.
Reported by: Mahesh Arumugam
Submitted by: Dorr H. Clark via gnn
Sponsored by: Citrix / NetScaler
mm [Sun, 10 Jun 2012 07:40:43 +0000 (07:40 +0000)]
MFC r236155:
Import illumos changeset 13570:3411fd5f1589
1948 zpool list should show more detailed pool information
Display per-vdev information with "zpool list -v".
The added expandsize property has currently no value on FreeBSD.
This changeset allows adding expansion support to individual vdevs
in the future.
mav [Sat, 9 Jun 2012 09:11:07 +0000 (09:11 +0000)]
MFC r233746:
Be more conservative in using READ CAPACITY(16) command. Previous code
checked PROTECT bit in INQUIRY data for all SPC devices, while it is defined
only since SPC-3. But there are some SPC-2 USB devices were reported, that
have PROTECT bit set, return no error for READ CAPACITY(16) command, but
return wrong sector count value in response.
kib [Sat, 9 Jun 2012 09:01:24 +0000 (09:01 +0000)]
MFC r236043:
Add a vn_bmap_seekhole(9) vnode helper which can be used by any
filesystem which supports VOP_BMAP(9) to implement SEEK_HOLE/SEEK_DATA
commands for lseek(2).
mav [Sat, 9 Jun 2012 08:51:25 +0000 (08:51 +0000)]
MFC r224806i (by mjacob):
Fixes for sure bus reference miscounting and potential device and
target reference miscounts. It also adds a helper function to get
the current reference counts for components of cam_path for debug
aid. One minor style(9) change.
mav [Sat, 9 Jun 2012 07:57:52 +0000 (07:57 +0000)]
r236666:
ATA/SATA controllers have no idea about protocol of the connected device
until transport will do some probe actions (at least soft reset).
Make ATA/SATA SIMs to not report bogus and confusing PROTO_ATA protocol.
Make ATA/SATA transport to fill that gap by reporting protocol to SIM with
XPT_SET_TRAN_SETTINGS and patching XPT_GET_TRAN_SETTINGS results if needed.
mav [Sat, 9 Jun 2012 07:44:51 +0000 (07:44 +0000)]
MFC r236437:
Rewrite enabling NCQ for SATA devices in a way more alike to SCSI TCQ.
This allows to control it with `camcontrol negotiate adaX -T (en|dis)able`
on the fly, same as for SCSI devices.
mav [Sat, 9 Jun 2012 07:36:18 +0000 (07:36 +0000)]
MFC r236393:
Use AC_GETDEV_CHANGED async to notify ada driver about DMA and NCQ status
change. Now that allows switching between PIO and DMA modes on the fly.
mav [Sat, 9 Jun 2012 07:29:07 +0000 (07:29 +0000)]
MFC r236234:
Allow to change number of openings (used tags) for ATA/SATA devices
via `camcontrol tags ... -N ...`. There is no need to tune it in
usual cases, but some users want to have it for debugging purposes.
mav [Fri, 8 Jun 2012 20:32:11 +0000 (20:32 +0000)]
MFC r235982:
Add tunable/sysctl kern.cam.pmp.hide_special, controlling whether special
PMP ports such as PMP configuration or SEMB should be exposed or hidden.
These ports were always hidden before as useless and sometimes promatic.
But with updated ses driver supporting SEMB it is no longer so straight.
Keep ports hidden by default to avoid probe request ttimeouts if SEP is
not connected to PMP's SEMB via I2C, that is very often situation.
mav [Fri, 8 Jun 2012 13:27:30 +0000 (13:27 +0000)]
MFC r233692:
Reenable unsolicited responses on CODEC if hdaa_sense_init() called again.
This fixes jack connection events handling after suspend/resume.
mav [Fri, 8 Jun 2012 13:22:50 +0000 (13:22 +0000)]
MFC r230845:
Make sound(4) more flexible in setting soft buffer and block sizes when
hardware imposes strict limitations on hard buffer and block sizes.
Previous code set soft buffer to be no smaller then hard buffer. On some
cards with fixed 64K physical buffer that caused up to 800ms play latency.
New code allows to set soft buffer size down to just two blocks of the hard
buffer and to not write more then that size ahead to the hardware buffer.
As result of that change I was able to reduce full practically measured
record-playback loop delay in those conditions down to only about 115ms
with theoretical playback latency of only about 50ms.
New code works fine for both vchans and direct cases. In both cases sound(4)
tries to follow hw.snd.latency_profile and hw.snd.latency values and
application-requested buffer and block sizes as much as limitation of two
hardware blocks allows.
This includes major code refactoring, HDMI support, new volume control,
automatic recording source selection, runtime reconfigureation, support
for more then 4 PCM devices on controller, multichannel recording,
additional playback/record streams, higher bandwidths support, more
informative device names and many other things.
mav [Fri, 8 Jun 2012 12:35:43 +0000 (12:35 +0000)]
MFC r230130:
Major snd_hda driver rewrite:
- Huge old hdac driver was split into three independent pieces: HDA
controller driver (hdac), HDA CODEC driver (hdacc) and HDA sudio function
driver (hdaa).
- Support for multichannel recording was added. Now, as specification
defines, driver checks input associations for pins with sequence numbers
14 and 15, and if found (usually) -- works as before, mixing signals
together. If it doesn't, it configures input association as multichannel.
- Signal tracer was improved to look for cases where several DACs/ADCs in
CODEC can work with the same audio signal. If such case found, driver
registers additional playback/record stream (channel) for the pcm device.
- New controller streams reservation mechanism was implemented. That
allows to have more pcm devices then streams supported by the controller
(usually 4 in each direction). Now it limits only number of simultaneously
transferred audio streams, that is rarely reachable and properly reported
if happens.
- Codec pins and GPIO signals configuration was exported via set of
writable sysctls. Another sysctl dev.hdaa.X.reconfig allows to trigger
driver reconfiguration in run-time.
- Driver now decodes pins location and connector type names. In some cases
it allows to hint user where on the system case connectors, related to the
pcm device, are located. Number of channels supported by pcm device,
reported now (if it is not 2), should also make search easier.
- Added workaround for digital mic on some Asus laptops/netbooks.
mav [Fri, 8 Jun 2012 11:58:28 +0000 (11:58 +0000)]
MFC r222826:
Make automatic hw.snd.default_unit choice a bit more intelligent. Instead
of just setting it to the first registered device, reevaluate it for each
device registered, trying to choose best candidate, unless one was forced.
For now use such preference order: play&rec, play, rec.
As side effect, this should workaround the situation when HDMI audio output
of the video card, usually not connected to anything, becomes default, that
requires manual user intervention to make sound working. If at some point
this won't be enough, we can try to fetch some additional priority flags
from the device driver.
jhb [Wed, 6 Jun 2012 21:57:03 +0000 (21:57 +0000)]
MFC 233760:
Export some more useful info about shared memory objects to userland
via procstat(1) and fstat(1):
- Change shm file descriptors to track the pathname they are associated
with and add a shm_path() method to copy the path out to a caller-supplied
buffer.
- Use shm_path() to export the path of a shared memory object via
struct kinfo_file.
- Change procstat to always print out the path for a given object if it
is valid.
- Teach fstat about shared memory objects and to display their path,
mode, and size.
emax [Wed, 6 Jun 2012 16:20:59 +0000 (16:20 +0000)]
MFC r235854
Seems applicable here as well.
Tweak condition for disabling allocation from per-CPU buckets in
low memory situation. I've observed a situation where per-CPU
allocations were disabled while there were enough free cached pages.
Basically, cnt.v_free_count was sitting stable at a value lower
than cnt.v_free_min and that caused massive performance drop.
Reviewed by: alc
Requested by: Andrew Boyer aboyer at averesystems dot com
jhb [Wed, 6 Jun 2012 16:01:45 +0000 (16:01 +0000)]
MFC 228509,228620,228533:
Add a helper API to allow in-kernel code to map portions of shared memory
objects created by shm_open(2) into the kernel's address space. This
provides a convenient way for creating shared memory buffers between
userland and the kernel without requiring custom character devices.
mav [Wed, 6 Jun 2012 12:36:40 +0000 (12:36 +0000)]
MFC r223084 (by gibbs):
sys/cam/scsi/scsi_da.c:
- Only attempt the closing synchronize cache on a disk
if it is still there.
- When a device is lost, report the number of outstanding
I/Os as they are drained.
- When a device is lost, return any unprocessed bios with
ENXIO instead of EIO.
- Filter asynchronous events, but always allow cam_periph_async()
to see them too.
mav [Wed, 6 Jun 2012 11:46:37 +0000 (11:46 +0000)]
MFC r208911 (by mjacob):
Implement the usage of Report Luns as part of SCSI probing for SCP3 or
better devices. This can be disabled on a per-device basis using quirks as
well.
This also handles the case where there is actually no connected LUN 0
(which can definitely be the case for storage arrays).
mav [Wed, 6 Jun 2012 11:40:16 +0000 (11:40 +0000)]
MFC r208896, r208900 (by mjacob):
Do a minor amount of stylifying. Also, get a Fibre Channel WWPN if one exists
for a da unit and create a sysctl OID for it.
Interface addresses are refcounted as packets move through the stack,
and there's garbage collection tied to it so that address changes can
safely propagate while traffic is flowing. In our setup, we weren't
changing or deleting any addresses, but the refcounting logic in
ip6_input() was wrong and caused a reference leak on every inbound
V6 packet. This eventually caused a 32bit overflow, and the resulting
0 value caused the garbage collection to run on the active address.
That then snowballed into the panic.
dougb [Mon, 4 Jun 2012 22:21:55 +0000 (22:21 +0000)]
Upgrade to 9.6-ESV-R7-P1, the latest from ISC. This version contains
a critical bugfix:
Processing of DNS resource records where the rdata field is zero length
may cause various issues for the servers handling them.
Processing of these records may lead to unexpected outcomes. Recursive
servers may crash or disclose some portion of memory to the client.
Secondary servers may crash on restart after transferring a zone
containing these records. Master servers may corrupt zone data if the
zone option "auto-dnssec" is set to "maintain". Other unexpected
problems that are not listed here may also be encountered.
All BIND users are strongly encouraged to upgrade.
mav [Mon, 4 Jun 2012 07:05:13 +0000 (07:05 +0000)]
MFC r235333:
Add two functions xpt_batch_start() and xpt_batch_done() to the CAM SIM KPI
to allow drivers to handle request completion directly without passing
them to the CAM SWI thread removing extra context switch.
Modify all ATA/SATA drivers to use them.
rea [Sun, 3 Jun 2012 18:05:19 +0000 (18:05 +0000)]
OpenSSH: allow VersionAddendum to be used again
Prior to this, setting VersionAddendum will be a no-op: one will
always have BASE_VERSION + " " + VERSION_HPN for VersionAddendum
set in the config and a bare BASE_VERSION + VERSION_HPN when there
is no VersionAddendum is set.
HPN patch requires both parties to have the "hpn" inside their
advertized versions, so we add VERSION_HPN to the VERSION_BASE
if HPN is enabled and omitting it if HPN is disabled.
VersionAddendum now uses the following logics:
* unset (default value): append " " and VERSION_ADDENDUM;
* VersionAddendum is set and isn't empty: append " "
and VersionAddendum;
* VersionAddendum is set and empty: don't append anything.
jilles [Sun, 3 Jun 2012 11:31:45 +0000 (11:31 +0000)]
MFC r236193: libfetch: Avoid SIGPIPE on network connections.
To avoid unexpected process termination from SIGPIPE when writing to a
closed network connection, enable SO_NOSIGPIPE on all network connections.
The POSIX standard MSG_NOSIGNAL is not used since it requires modifying all
send calls to add this flag. This is particularly nasty for SSL connections.
marius [Sat, 2 Jun 2012 19:15:21 +0000 (19:15 +0000)]
MFC: r236328
Try to finally get the point in time at which bge_add_sysctls() is called
right; it needs to be called before bge_can_use_msi() but in turn requires
bge_flags to be properly set.
marius [Sat, 2 Jun 2012 19:11:47 +0000 (19:11 +0000)]
MFC: r236156
- Fix some typos in mmc_acquire_bus() and mmc_send_csd().
- Fix some math errors in mmc_decode_csd_sd().
- Fix incorrect arguments to mmc_send_app_op_cond() in mmc_go_discovery().
- Add reporting of CSD for debug purposes.
- Add detection (and skipping) of password-locked cards.
- Add setting of block length on card if necessary.
marius [Sat, 2 Jun 2012 18:57:16 +0000 (18:57 +0000)]
MFC: r236061
- When creating the DMA tag for user data, don't ask for more segments
than required for handling MAXPHYS and report the resulting maximum
I/O size to CAM instead of implicitly limiting it to DFLTPHYS.
- Move the variables of sym_action2() out of nested scope as required
by style(9) and remove extraneous curly braces.
- Replace a magic value for PCIR_COMMAND with the appropriate macro.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
bapt [Sat, 2 Jun 2012 15:14:12 +0000 (15:14 +0000)]
MFC: 228545,229572
Modify pw_copy:
- if pw is NULL and oldpw is not NULL then the oldpw is deleted
- if pw->pw_name != oldpw->pw_name but pw->pw_uid == oldpw->pw_uid
then it renames the user
add new gr_* functions so now gr_util API is similar to pw_util API,
this allow to manipulate groups in a safe way.
Add new pw_make_v7 to make a passwd line (in v7 format) out of a struct passwd
iwasaki [Fri, 1 Jun 2012 13:21:32 +0000 (13:21 +0000)]
MFC r235692,235772,236220,236221:
- Don't start the sleep state transition procedure while sleep is
disabled or the system is in shutdown procedure.
- Ignore the power button press event for resuming rather than starting
shutdown.
- Fix the problem acpi_sleep_force() hang.
- Reorder resume procedures to avoid hang during AcpiLeaveSleepState()
execution.
rstone [Wed, 30 May 2012 23:42:48 +0000 (23:42 +0000)]
MFC r235459 and r235471
r235459:
Implement the DTrace sched provider. This implementation aims to be
compatible with the sched provider implemented by Solaris and its open-
source derivatives. Full documentation of the sched provider can be found
on Oracle's DTrace wiki pages.
Note that for compatibility with scripts originally written for Solaris,
serveral probes are defined that will never fire. These probes are defined
to fire when Solaris-specific features perform certain actions. As these
features are not present in FreeBSD, the probes can never fire.
Also, I have added a two probes that are not defined in Solaris, lend-pri
and load-change. These probes have been added to make it possible to
collect schedgraph data with DTrace.
Finally, a few probes are defined in Solaris to take a cpuinfo_t *
argument. As it was not immediately clear to me how to translate that to
FreeBSD, currently those probes are passed NULL in place of a cpuinfo_t *.
Sponsored by: Sandvine Incorporated
r235471:
Fix typo in function name SDT_PROBE4 and unbreak 4BSD UP.
projects / FreeBSD / stable / 8.git / log