Bindings/display/panel/sharp,lq150x1lg11.txt

   1 Sharp 15" LQ150X1LG11 XGA TFT LCD panel
   2
   3 Required properties:
   4 - compatible: should be "sharp,lq150x1lg11"
   5 - power-supply: regulator to provide the VCC supply voltage (3.3 volts)
   6
   7 Optional properties:
   8 - backlight: phandle of the backlight device
   9 - rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin.
  10 - sellvds-gpios: a single GPIO for the SELLVDS pin.
  11
  12 If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS
  13 pins are assumed to be handled appropriately by the hardware.
  14
  15 Example:
  16
  17         backlight: backlight {
  18                 compatible = "pwm-backlight";
  19                 pwms = <&pwm 0 100000>;                      /* VBR */
  20
  21                 brightness-levels = <0 20 40 60 80 100>;
  22                 default-brightness-level = <2>;
  23
  24                 power-supply = <&vdd_12v_reg>;               /* VDD */
  25                 enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;  /* XSTABY */
  26         };
  27
  28         panel {
  29                 compatible = "sharp,lq150x1lg11";
  30
  31                 power-supply = <&vcc_3v3_reg>;               /* VCC */
  32
  33                 backlight = <&backlight>;
  34                 rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;    /* RL/UD */
  35                 sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
  36         };