1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 $id: http://devicetree.org/schemas/media/i2c/sony,imx290.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Sony IMX290 1/2.8-Inch CMOS Image Sensor
10 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
11 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
14 The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square
15 Pixel for Color Cameras. It is programmable through I2C and 4-wire
16 interfaces. The sensor output is available via CMOS logic parallel SDR
17 output, Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2
18 bus is the default. No bindings have been defined for the other busses.
32 description: Input clock (37.125 MHz or 74.25 MHz)
37 description: Frequency of the xclk clock in Hz
40 description: Analog power supply (2.9V)
43 description: Digital core power supply (1.2V)
46 description: Digital I/O power supply (1.8V)
49 description: Sensor reset (XCLR) GPIO
53 $ref: /schemas/graph.yaml#/$defs/port-base
59 $ref: /schemas/media/video-interfaces.yaml#
60 unevaluatedProperties: false
74 link-frequencies: true
80 additionalProperties: false
93 additionalProperties: false
97 #include <dt-bindings/gpio/gpio.h>
100 #address-cells = <1>;
103 imx290: camera-sensor@1a {
104 compatible = "sony,imx290";
107 pinctrl-names = "default";
108 pinctrl-0 = <&camera_rear_default>;
111 clock-names = "xclk";
112 clock-frequency = <37125000>;
114 vdddo-supply = <&camera_vdddo_1v8>;
115 vdda-supply = <&camera_vdda_2v8>;
116 vddd-supply = <&camera_vddd_1v5>;
118 reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
121 imx290_ep: endpoint {
122 data-lanes = <1 2 3 4>;
123 link-frequencies = /bits/ 64 <445500000>;
124 remote-endpoint = <&csiphy0_ep>;