Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DMAKE_KERBEROS4 to build KerberosIV
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNOSECURE do not go into secure subdir
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24
  25 #
  26 # The intended user-driven targets are:
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # installworld- install everything built by "buildworld"
  29 # update      - convenient way to update your source tree (eg: sup/cvs)
  30 # most        - build user commands, no libraries or include files
  31 # installmost - install user commands, no libraries or include files
  32 #
  33 # Standard targets (not defined here) are documented in the makefiles in
  34 # /usr/share/mk.  These include:
  35 #               obj depend all install clean cleandepend cleanobj
  36
  37 # Put initial settings here.
  38 SUBDIR=
  39
  40 # We must do share/info early so that installation of info `dir'
  41 # entries works correctly.  Do it first since it is less likely to
  42 # grow dependencies on include and lib than vice versa.
  43 .if exists(${.CURDIR}/share/info)
  44 SUBDIR+= share/info
  45 .endif
  46
  47 # We must do include and lib early so that the perl *.ph generation
  48 # works correctly as it uses the header files installed by this.
  49 .if exists(${.CURDIR}/include)
  50 SUBDIR+= include
  51 .endif
  52 .if exists(${.CURDIR}/lib)
  53 SUBDIR+= lib
  54 .endif
  55
  56 .if exists(${.CURDIR}/bin)
  57 SUBDIR+= bin
  58 .endif
  59 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  60 SUBDIR+= games
  61 .endif
  62 .if exists(${.CURDIR}/gnu)
  63 SUBDIR+= gnu
  64 .endif
  65 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
  66     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
  67 SUBDIR+= kerberosIV
  68 .endif
  69 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  70     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  71 SUBDIR+= kerberos5
  72 .endif
  73 .if exists(${.CURDIR}/libexec)
  74 SUBDIR+= libexec
  75 .endif
  76 .if exists(${.CURDIR}/sbin)
  77 SUBDIR+= sbin
  78 .endif
  79 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
  80 SUBDIR+= secure
  81 .endif
  82 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  83 SUBDIR+= share
  84 .endif
  85 .if exists(${.CURDIR}/sys)
  86 SUBDIR+= sys
  87 .endif
  88 .if exists(${.CURDIR}/usr.bin)
  89 SUBDIR+= usr.bin
  90 .endif
  91 .if exists(${.CURDIR}/usr.sbin)
  92 SUBDIR+= usr.sbin
  93 .endif
  94
  95 # etc must be last for "distribute" to work
  96 .if exists(${.CURDIR}/etc)
  97 SUBDIR+= etc
  98 .endif
  99
 100 # These are last, since it is nice to at least get the base system
 101 # rebuilt before you do them.
 102 .if defined(LOCAL_DIRS)
 103 .for _DIR in ${LOCAL_DIRS}
 104 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 105 SUBDIR+= ${_DIR}
 106 .endif
 107 .endfor
 108 .endif
 109
 110 .if defined(NOCLEANDIR)
 111 CLEANDIR=       clean cleandepend
 112 .else
 113 CLEANDIR=       cleandir
 114 .endif
 115
 116 CVS?=           cvs
 117 SUP?=           /usr/local/bin/cvsup
 118 SUPFLAGS?=      -g -L 2 -P -
 119 .if defined(SUPHOST)
 120 SUPFLAGS+=      -h ${SUPHOST}
 121 .endif
 122
 123 MAKEOBJDIRPREFIX?=      /usr/obj
 124 TARGET_ARCH?=   ${MACHINE_ARCH}
 125 TARGET?=        ${MACHINE}
 126 .if make(buildworld)
 127 BUILD_ARCH!=    sysctl -n hw.machine_arch
 128 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 129 .error To cross-build, set TARGET_ARCH.
 130 .endif
 131 .endif
 132 .if ${MACHINE_ARCH} == ${TARGET_ARCH}
 133 OBJTREE=        ${MAKEOBJDIRPREFIX}
 134 .else
 135 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET_ARCH}
 136 .endif
 137 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 138 # /usr/games added for fortune which depend on strfile
 139 STRICTTMPPATH=  ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 140 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 141 OBJFORMAT_PATH?=        /usr/libexec
 142
 143 INSTALLTMP!=    /usr/bin/mktemp -d -u -t install
 144
 145 #
 146 # Building a world goes through the following stages
 147 #
 148 # 1. bootstrap-tool stage [BMAKE]
 149 #       This stage is responsible for creating programs that
 150 #       are needed for backward compatibility reasons. They
 151 #       are not built as cross-tools.
 152 # 2. build-tool stage [TMAKE]
 153 #       This stage is responsible for creating the object
 154 #       tree and building any tools that are needed during
 155 #       the build process.
 156 # 3. cross-tool stage [XMAKE]
 157 #       This stage is responsible for creating any tools that
 158 #       are needed for cross-builds. A cross-compiler is one
 159 #       of them.
 160 # 4. world stage [WMAKE]
 161 #       This stage actually builds the world.
 162 # 5. install stage (optional) [IMAKE]
 163 #       This stage installs a previously built world.
 164 #
 165
 166 # Common environment for world related stages
 167 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 168                 MACHINE_ARCH=${TARGET_ARCH} \
 169                 MACHINE=${TARGET} \
 170                 COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
 171                 LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib \
 172                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
 173                 CFLAGS="-nostdinc ${CFLAGS}" \
 174                 CXXINCLUDES="-nostdinc++ ${CXXINCLUDES}" \
 175                 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0 \
 176                 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
 177                 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
 178                 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
 179
 180 # bootstrap-tool stage
 181 BMAKEENV=       MAKEOBJDIRPREFIX=${WORLDTMP} \
 182                 DESTDIR= \
 183                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 184 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 185                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 186                 -DNO_WERROR
 187
 188 # build-tool stage
 189 TMAKEENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 190                 DESTDIR= \
 191                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 192 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1
 193
 194 # cross-tool stage
 195 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 196
 197 # world stage
 198 WMAKEENV=       ${CROSSENV} \
 199                 DESTDIR=${WORLDTMP} \
 200                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 201                 PATH=${TMPPATH}
 202 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 203
 204 # install stage
 205 IMAKEENV=       ${CROSSENV} \
 206                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 207 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 208
 209 # kernel stage
 210 KMAKEENV=       ${WMAKEENV} \
 211                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
 212
 213 USRDIRS=        usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
 214                 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
 215                 usr/share/dict \
 216                 usr/share/groff_font/devX100 \
 217                 usr/share/groff_font/devX100-12 \
 218                 usr/share/groff_font/devX75 \
 219                 usr/share/groff_font/devX75-12 \
 220                 usr/share/groff_font/devascii \
 221                 usr/share/groff_font/devcp1047 \
 222                 usr/share/groff_font/devdvi \
 223                 usr/share/groff_font/devhtml \
 224                 usr/share/groff_font/devkoi8-r \
 225                 usr/share/groff_font/devlatin1 \
 226                 usr/share/groff_font/devlbp \
 227                 usr/share/groff_font/devlj4 \
 228                 usr/share/groff_font/devps \
 229                 usr/share/groff_font/devutf8 \
 230                 usr/share/tmac/mdoc usr/share/tmac/mm
 231
 232 INCDIRS=        arpa g++/std isc objc protocols readline rpc rpcsvc openssl \
 233                 security
 234
 235 #
 236 # buildworld
 237 #
 238 # Attempt to rebuild the entire system, with reasonable chance of
 239 # success, regardless of how old your existing system is.
 240 #
 241 buildworld:
 242         @echo
 243         @echo "--------------------------------------------------------------"
 244         @echo ">>> Rebuilding the temporary build tree"
 245         @echo "--------------------------------------------------------------"
 246 .if !defined(NOCLEAN)
 247         rm -rf ${WORLDTMP}
 248 .endif
 249 .for _dir in ${USRDIRS}
 250         mkdir -p ${WORLDTMP}/${_dir}
 251 .endfor
 252 .for _dir in ${INCDIRS}
 253         mkdir -p ${WORLDTMP}/usr/include/${_dir}
 254 .endfor
 255         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 256         @echo
 257         @echo "--------------------------------------------------------------"
 258         @echo ">>> stage 1: bootstrap tools"
 259         @echo "--------------------------------------------------------------"
 260         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 261 .if !defined(NOCLEAN)
 262         @echo
 263         @echo "--------------------------------------------------------------"
 264         @echo ">>> stage 2: cleaning up the object tree"
 265         @echo "--------------------------------------------------------------"
 266         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 267 .endif
 268         @echo
 269         @echo "--------------------------------------------------------------"
 270         @echo ">>> stage 2: rebuilding the object tree"
 271         @echo "--------------------------------------------------------------"
 272         cd ${.CURDIR}; ${WMAKE} par-obj
 273         @echo
 274         @echo "--------------------------------------------------------------"
 275         @echo ">>> stage 2: build tools"
 276         @echo "--------------------------------------------------------------"
 277         cd ${.CURDIR}; ${TMAKE} build-tools
 278         @echo
 279         @echo "--------------------------------------------------------------"
 280         @echo ">>> stage 3: cross tools"
 281         @echo "--------------------------------------------------------------"
 282         cd ${.CURDIR}; ${XMAKE} cross-tools
 283         @echo
 284         @echo "--------------------------------------------------------------"
 285         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 286         @echo "--------------------------------------------------------------"
 287         cd ${.CURDIR}; ${WMAKE} SHARED=copies includes
 288         @echo
 289         @echo "--------------------------------------------------------------"
 290         @echo ">>> stage 4: building libraries"
 291         @echo "--------------------------------------------------------------"
 292         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 293         @echo
 294         @echo "--------------------------------------------------------------"
 295         @echo ">>> stage 4: make dependencies"
 296         @echo "--------------------------------------------------------------"
 297         cd ${.CURDIR}; ${WMAKE} par-depend
 298         @echo
 299         @echo "--------------------------------------------------------------"
 300         @echo ">>> stage 4: building everything.."
 301         @echo "--------------------------------------------------------------"
 302         cd ${.CURDIR}; ${WMAKE} all
 303
 304 everything:
 305         @echo "--------------------------------------------------------------"
 306         @echo ">>> Building everything.."
 307         @echo "--------------------------------------------------------------"
 308         cd ${.CURDIR}; ${WMAKE} all
 309
 310 #
 311 # installworld
 312 #
 313 # Installs everything compiled by a 'buildworld'.
 314 #
 315 installworld:
 316         mkdir -p ${INSTALLTMP}
 317         for prog in [ awk cat chflags chmod chown date echo egrep find grep \
 318             ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
 319             test true uname wc zic; do \
 320                 cp `which $$prog` ${INSTALLTMP}; \
 321         done
 322         cd ${.CURDIR}; ${IMAKE} reinstall
 323         rm -rf ${INSTALLTMP}
 324
 325 #
 326 # reinstall
 327 #
 328 # If you have a build server, you can NFS mount the source and obj directories
 329 # and do a 'make reinstall' on the *client* to install new binaries from the
 330 # most recent server build.
 331 #
 332 reinstall:
 333         @echo "--------------------------------------------------------------"
 334         @echo ">>> Making hierarchy"
 335         @echo "--------------------------------------------------------------"
 336         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 337         @echo
 338         @echo "--------------------------------------------------------------"
 339         @echo ">>> Installing everything.."
 340         @echo "--------------------------------------------------------------"
 341         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 342 .if !defined(NOMAN)
 343         @echo
 344         @echo "--------------------------------------------------------------"
 345         @echo ">>> Rebuilding man page indices"
 346         @echo "--------------------------------------------------------------"
 347         cd ${.CURDIR}/share/man; ${MAKE} makedb
 348 .endif
 349
 350 #
 351 # distribworld
 352 #
 353 # Front-end to distribute to make sure the search path contains
 354 # the object directory. Needed for miniperl.
 355 #
 356 distribworld:
 357         cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
 358
 359 #
 360 # buildkernel and installkernel
 361 #
 362 # Which kernels to build and/or install is specified by setting
 363 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 364 # Only the existing (depending TARGET) config files are used
 365 # for building kernels and only the first of these is designated
 366 # as the one being installed.
 367 #
 368 # Note that we have to use TARGET instead of TARGET_ARCH when
 369 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 370 # be set to cross-build, we have to make sure TARGET is set
 371 # properly.
 372
 373 .if !defined(KERNCONF) && defined(KERNEL)
 374 KERNCONF=       ${KERNEL}
 375 KERNWARN=       yes
 376 .else
 377 KERNCONF?=      GENERIC
 378 .endif
 379 INSTKERNNAME?=  kernel
 380
 381 # The only exotic TARGET_ARCH/TARGET combination valid at this
 382 # time is i386/pc98. In all other cases set TARGET equal to
 383 # TARGET_ARCH.
 384 .if ${TARGET_ARCH} != "i386" || ${TARGET} != "pc98"
 385 TARGET=         ${TARGET_ARCH}
 386 .endif
 387
 388 KRNLSRCDIR=     ${.CURDIR}/sys
 389 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 390 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 391 KERNCONFDIR?=   ${KRNLCONFDIR}
 392
 393 BUILDKERNELS=
 394 INSTALLKERNEL=
 395 .for _kernel in ${KERNCONF}
 396 .if exists(${KERNCONFDIR}/${_kernel})
 397 BUILDKERNELS+=  ${_kernel}
 398 .if empty(INSTALLKERNEL)
 399 INSTALLKERNEL= ${_kernel}
 400 .endif
 401 .endif
 402 .endfor
 403
 404 #
 405 # buildkernel
 406 #
 407 # Builds all kernels defined by BUILDKERNELS.
 408 #
 409 buildkernel:
 410 .if empty(BUILDKERNELS)
 411         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 412         @false
 413 .endif
 414 .if defined(KERNWARN)
 415         @echo "--------------------------------------------------------------"
 416         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 417         @echo "--------------------------------------------------------------"
 418         @sleep 3
 419 .endif
 420         @echo
 421 .for _kernel in ${BUILDKERNELS}
 422         @echo "--------------------------------------------------------------"
 423         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 424         @echo "--------------------------------------------------------------"
 425         @echo "===> ${_kernel}"
 426         mkdir -p ${KRNLOBJDIR}
 427 .if !defined(NO_KERNELCONFIG)
 428         cd ${KRNLCONFDIR}; \
 429                 PATH=${TMPPATH} \
 430                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 431                         ${KERNCONFDIR}/${_kernel}
 432 .endif
 433 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 434 .if defined(MODULES_WITH_WORLD) || defined(NO_MODULES) || !exists(${KRNLSRCDIR}/modules)
 435         cd ${KRNLOBJDIR}/${_kernel}; \
 436             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean
 437 .else
 438         cd ${KRNLOBJDIR}/${_kernel}; \
 439             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean cleandir
 440 .endif
 441 .endif
 442         cd ${KRNLOBJDIR}/${_kernel}; \
 443                 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
 444                     ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
 445 .if !defined(NO_KERNELDEPEND)
 446         cd ${KRNLOBJDIR}/${_kernel}; \
 447             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 448 .endif
 449         cd ${KRNLOBJDIR}/${_kernel}; \
 450             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 451         @echo "--------------------------------------------------------------"
 452         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 453         @echo "--------------------------------------------------------------"
 454 .endfor
 455
 456 #
 457 # installkernel
 458 #
 459 # Install the kernel defined by INSTALLKERNEL
 460 #
 461 installkernel:
 462         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 463             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
 464 reinstallkernel:
 465         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 466             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
 467
 468 #
 469 # kernel
 470 #
 471 # Short hand for `make buildkernel installkernel'
 472 #
 473 kernel: buildkernel installkernel
 474
 475 #
 476 # update
 477 #
 478 # Update the source tree, by running sup and/or running cvs to update to the
 479 # latest copy.
 480 #
 481 update:
 482 .if defined(SUP_UPDATE)
 483         @echo "--------------------------------------------------------------"
 484         @echo ">>> Running ${SUP}"
 485         @echo "--------------------------------------------------------------"
 486 .if defined(SUPFILE)
 487         @${SUP} ${SUPFLAGS} ${SUPFILE}
 488 .endif
 489 .if defined(SUPFILE1)
 490         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 491 .endif
 492 .if defined(SUPFILE2)
 493         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 494 .endif
 495 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 496         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 497 .endif
 498 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 499         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 500 .endif
 501 .endif
 502 .if defined(CVS_UPDATE)
 503         @echo "--------------------------------------------------------------"
 504         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 505         @echo "--------------------------------------------------------------"
 506         cd ${.CURDIR}; ${CVS} -q update -A -P -d
 507 .endif
 508
 509 #
 510 # most
 511 #
 512 # Build most of the user binaries on the existing system libs and includes.
 513 #
 514 most:
 515         @echo "--------------------------------------------------------------"
 516         @echo ">>> Building programs only"
 517         @echo "--------------------------------------------------------------"
 518         cd ${.CURDIR}/bin;              ${MAKE} all
 519         cd ${.CURDIR}/sbin;             ${MAKE} all
 520         cd ${.CURDIR}/libexec;          ${MAKE} all
 521         cd ${.CURDIR}/usr.bin;          ${MAKE} all
 522         cd ${.CURDIR}/usr.sbin;         ${MAKE} all
 523         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} all
 524         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} all
 525
 526 #
 527 # installmost
 528 #
 529 # Install the binaries built by the 'most' target.  This does not include
 530 # libraries or include files.
 531 #
 532 installmost:
 533         @echo "--------------------------------------------------------------"
 534         @echo ">>> Installing programs only"
 535         @echo "--------------------------------------------------------------"
 536         cd ${.CURDIR}/bin;              ${MAKE} install
 537         cd ${.CURDIR}/sbin;             ${MAKE} install
 538         cd ${.CURDIR}/libexec;          ${MAKE} install
 539         cd ${.CURDIR}/usr.bin;          ${MAKE} install
 540         cd ${.CURDIR}/usr.sbin;         ${MAKE} install
 541         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} install
 542         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} install
 543
 544 #
 545 # ------------------------------------------------------------------------
 546 #
 547 # From here onwards are utility targets used by the 'make world' and
 548 # related targets.  If your 'world' breaks, you may like to try to fix
 549 # the problem and manually run the following targets to attempt to
 550 # complete the build.  Beware, this is *not* guaranteed to work, you
 551 # need to have a pretty good grip on the current state of the system
 552 # to attempt to manually finish it.  If in doubt, 'make world' again.
 553 #
 554
 555 #
 556 # bootstrap-tools: Build tools needed for compatibility
 557 #
 558 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 559 _strfile=       games/fortune/strfile
 560 .endif
 561
 562 bootstrap-tools:
 563 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
 564     usr.sbin/config usr.sbin/kbdcontrol \
 565     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
 566         cd ${.CURDIR}/${_tool}; \
 567                 ${MAKE} obj; \
 568                 ${MAKE} depend; \
 569                 ${MAKE} all; \
 570                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 571 .endfor
 572
 573 #
 574 # build-tools: Build special purpose build tools
 575 #
 576 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 577 _games= games/adventure games/hack games/phantasia
 578 .endif
 579
 580 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 581 _share= share/syscons/scrnmaps
 582 .endif
 583
 584 .if !defined(NO_FORTRAN)
 585 _fortran= gnu/usr.bin/cc/f771
 586 .endif
 587
 588 .if !defined(NOPERL)
 589 _perl=  gnu/usr.bin/perl/miniperl
 590 .endif
 591
 592 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
 593     !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 594 _libroken4= kerberosIV/lib/libroken
 595 .endif
 596
 597 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 598     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 599 _libkrb5= kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 600 .endif
 601
 602 build-tools:
 603 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
 604     ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
 605     usr.bin/file usr.sbin/sysinstall
 606         cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
 607 .endfor
 608
 609 #
 610 # cross-tools: Build cross-building tools
 611 #
 612 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 613 _elf2exe=       usr.sbin/elf2exe
 614 .endif
 615
 616 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 617 _btxld= usr.sbin/btxld
 618 .endif
 619
 620 cross-tools:
 621 .for _tool in ${_btxld} ${_elf2exe} \
 622     gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
 623         cd ${.CURDIR}/${_tool}; \
 624                 ${MAKE} obj; \
 625                 ${MAKE} depend; \
 626                 ${MAKE} all; \
 627                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 628 .endfor
 629
 630 #
 631 # hierarchy - ensure that all the needed directories are present
 632 #
 633 hierarchy:
 634         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 635
 636 #
 637 # includes - possibly generate and install the include files.
 638 #
 639 includes:
 640         cd ${.CURDIR}/include;                  ${MAKE} -B all install
 641         cd ${.CURDIR}/gnu/include;              ${MAKE} install
 642         cd ${.CURDIR}/gnu/lib/libobjc;          ${MAKE} beforeinstall
 643         cd ${.CURDIR}/gnu/lib/libreadline/readline;     ${MAKE} beforeinstall
 644         cd ${.CURDIR}/gnu/lib/libregex;         ${MAKE} beforeinstall
 645         cd ${.CURDIR}/gnu/lib/libstdc++;        ${MAKE} beforeinstall
 646         cd ${.CURDIR}/gnu/lib/libdialog;        ${MAKE} beforeinstall
 647         cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus;   ${MAKE} beforeinstall
 648 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 649 .if exists(${.CURDIR}/secure/lib/libcrypto)
 650         cd ${.CURDIR}/secure/lib/libcrypto;     ${MAKE} beforeinstall
 651 .endif
 652 .if exists(${.CURDIR}/secure/lib/libssl)
 653         cd ${.CURDIR}/secure/lib/libssl;        ${MAKE} beforeinstall
 654 .endif
 655 .endif
 656 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
 657     defined(MAKE_KERBEROS4)
 658         cd ${.CURDIR}/kerberosIV/lib/libacl;    ${MAKE} beforeinstall
 659         cd ${.CURDIR}/kerberosIV/lib/libkadm;   ${MAKE} beforeinstall
 660         cd ${.CURDIR}/kerberosIV/lib/libkafs;   ${MAKE} beforeinstall
 661         cd ${.CURDIR}/kerberosIV/lib/libkdb;    ${MAKE} beforeinstall
 662         cd ${.CURDIR}/kerberosIV/lib/libkrb;    ${MAKE} beforeinstall
 663         cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
 664 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 665         cd ${.CURDIR}/secure/lib/libtelnet;     ${MAKE} beforeinstall
 666 .else
 667         cd ${.CURDIR}/lib/libtelnet;            ${MAKE} beforeinstall
 668 .endif
 669 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
 670     defined(MAKE_KERBEROS5)
 671         cd ${.CURDIR}/kerberos5/lib/libasn1;            ${MAKE} beforeinstall
 672         cd ${.CURDIR}/kerberos5/lib/libhdb;             ${MAKE} beforeinstall
 673         cd ${.CURDIR}/kerberos5/lib/libkadm5clnt;       ${MAKE} beforeinstall
 674         cd ${.CURDIR}/kerberos5/lib/libkadm5srv;        ${MAKE} beforeinstall
 675         cd ${.CURDIR}/kerberos5/lib/libkafs5;           ${MAKE} beforeinstall
 676         cd ${.CURDIR}/kerberos5/lib/libkrb5;            ${MAKE} beforeinstall
 677         cd ${.CURDIR}/kerberos5/lib/libsl;              ${MAKE} beforeinstall
 678 .endif
 679 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
 680         cd ${.CURDIR}/lib/csu/${MACHINE_ARCH};  ${MAKE} beforeinstall
 681 .endif
 682         cd ${.CURDIR}/gnu/lib/csu;              ${MAKE} beforeinstall
 683         cd ${.CURDIR}/lib/libalias;             ${MAKE} beforeinstall
 684         cd ${.CURDIR}/lib/libatm;               ${MAKE} beforeinstall
 685         cd ${.CURDIR}/lib/libdevstat;           ${MAKE} beforeinstall
 686         cd ${.CURDIR}/lib/libc;                 ${MAKE} beforeinstall
 687         cd ${.CURDIR}/lib/libcalendar;          ${MAKE} beforeinstall
 688         cd ${.CURDIR}/lib/libcam;               ${MAKE} beforeinstall
 689         cd ${.CURDIR}/lib/libdisk;              ${MAKE} beforeinstall
 690         cd ${.CURDIR}/lib/libedit;              ${MAKE} beforeinstall
 691         cd ${.CURDIR}/lib/libfetch;             ${MAKE} beforeinstall
 692         cd ${.CURDIR}/lib/libftpio;             ${MAKE} beforeinstall
 693         cd ${.CURDIR}/lib/libkvm;               ${MAKE} beforeinstall
 694         cd ${.CURDIR}/lib/libmd;                ${MAKE} beforeinstall
 695         cd ${.CURDIR}/lib/libmp;                ${MAKE} beforeinstall
 696         cd ${.CURDIR}/lib/msun;                 ${MAKE} beforeinstall
 697         cd ${.CURDIR}/lib/libncp;               ${MAKE} beforeinstall
 698         cd ${.CURDIR}/lib/libncurses;           ${MAKE} beforeinstall
 699         cd ${.CURDIR}/lib/libnetgraph;          ${MAKE} beforeinstall
 700         cd ${.CURDIR}/lib/libopie;              ${MAKE} beforeinstall
 701         cd ${.CURDIR}/lib/libpcap;              ${MAKE} beforeinstall
 702         cd ${.CURDIR}/lib/libradius;            ${MAKE} beforeinstall
 703         cd ${.CURDIR}/lib/librpcsvc;            ${MAKE} beforeinstall
 704         cd ${.CURDIR}/lib/libpam/libpam;        ${MAKE} beforeinstall
 705         cd ${.CURDIR}/lib/libsbuf;              ${MAKE} beforeinstall
 706         cd ${.CURDIR}/lib/libstand;             ${MAKE} beforeinstall
 707         cd ${.CURDIR}/lib/libtacplus;           ${MAKE} beforeinstall
 708         cd ${.CURDIR}/lib/libcom_err;           ${MAKE} beforeinstall
 709         cd ${.CURDIR}/lib/libutil;              ${MAKE} beforeinstall
 710         cd ${.CURDIR}/lib/libvgl;               ${MAKE} beforeinstall
 711         cd ${.CURDIR}/lib/libwrap;              ${MAKE} beforeinstall
 712         cd ${.CURDIR}/lib/libz;                 ${MAKE} beforeinstall
 713         cd ${.CURDIR}/usr.bin/lex;              ${MAKE} beforeinstall
 714
 715 #
 716 # libraries - build all libraries, and install them under ${DESTDIR}.
 717 #
 718 # The following dependencies exist between the libraries:
 719 #
 720 # lib*: csu libgcc_pic
 721 # libatm: libmd
 722 # libcam: libsbuf
 723 # libcrypt: libmd
 724 # libdevstat: libkvm
 725 # libdialog: libncurses
 726 # libedit: libncurses
 727 # libg++: msun
 728 # libkrb: libcrypt
 729 # libopie: libmd
 730 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
 731 #         librpcsvc libtacplus libutil libz libssh
 732 # libradius: libmd
 733 # libreadline: libncurses
 734 # libstc++: msun
 735 # libtacplus: libmd
 736 #
 737 # Across directories this comes down to (rougly):
 738 #
 739 # gnu/lib: lib/msun lib/libncurses
 740 # kerberosIV/lib kerberos5/lib: lib/libcrypt
 741 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
 742 #             secure/lib/libssh lib/libz
 743 # secure/lib: lib/libmd
 744 #
 745 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
 746 _csu=   lib/csu/${MACHINE_ARCH}.pcc
 747 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
 748 _csu=   lib/csu/i386-elf
 749 .else
 750 _csu=   lib/csu/${MACHINE_ARCH}
 751 .endif
 752
 753 .if !defined(NOSECURE) && !defined(NOCRYPT)
 754 _secure_lib=    secure/lib
 755 .endif
 756
 757 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 758 _kerberosIV_lib=        kerberosIV/lib
 759 .endif
 760
 761 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 762 _kerberos5_lib= kerberos5/lib
 763 .endif
 764
 765 .if ${MACHINE_ARCH} == "i386"
 766 _libkeycap=     usr.sbin/pcvt/keycap
 767 .endif
 768
 769 .if !defined(NOPERL)
 770 _libperl=       gnu/usr.bin/perl/libperl
 771 .endif
 772
 773 libraries:
 774 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
 775     ${_secure_lib} ${_kerberosIV_lib} \
 776     ${_kerberos5_lib} lib/libcom_err lib/libkvm lib/msun lib/libncurses \
 777     lib/libopie lib/libradius lib/librpcsvc lib/libsbuf lib/libtacplus \
 778     lib/libutil lib/libz lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
 779 .if exists(${.CURDIR}/${_lib})
 780         cd ${.CURDIR}/${_lib}; \
 781                 ${MAKE} depend; \
 782                 ${MAKE} all; \
 783                 ${MAKE} install
 784 .endif
 785 .endfor
 786
 787 .for __target in clean cleandepend cleandir depend obj
 788 .for entry in ${SUBDIR}
 789 ${entry}.${__target}__D: .PHONY
 790         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 791                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 792                 edir=${entry}.${MACHINE_ARCH}; \
 793                 cd ${.CURDIR}/$${edir}; \
 794         else \
 795                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 796                 edir=${entry}; \
 797                 cd ${.CURDIR}/$${edir}; \
 798         fi; \
 799         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 800 .endfor
 801 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 802 .endfor
 803
 804 .include <bsd.subdir.mk>