4 # Make command line options:
5 # -DMAKE_KERBEROS4 to build KerberosIV
6 # -DMAKE_KERBEROS5 to build Kerberos5
7 # -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8 # -DNOCLEAN do not clean at all
9 # -DNOCRYPT will prevent building of crypt versions
10 # -DNOPROFILE do not build profiled libraries
11 # -DNOSECURE do not go into secure subdir
12 # -DNOGAMES do not go into games subdir
13 # -DNOSHARE do not go into share subdir
14 # -DNOINFO do not make or install info files
15 # -DNOLIBC_R do not build libc_r.
16 # -DNO_FORTRAN do not build g77 and related libraries.
17 # -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18 # -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19 # -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20 # -DNO_PORTSUPDATE do not update ports in ${MAKE} update
21 # -DNO_DOCUPDATE do not update doc in ${MAKE} update
22 # LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23 # TARGET_ARCH="arch" to crossbuild world to a different arch
26 # The intended user-driven targets are:
27 # buildworld - rebuild *everything*, including glue to help do upgrades
28 # installworld- install everything built by "buildworld"
29 # update - convenient way to update your source tree (eg: sup/cvs)
30 # most - build user commands, no libraries or include files
31 # installmost - install user commands, no libraries or include files
33 # Standard targets (not defined here) are documented in the makefiles in
34 # /usr/share/mk. These include:
35 # obj depend all install clean cleandepend cleanobj
37 # Put initial settings here.
40 # We must do share/info early so that installation of info `dir'
41 # entries works correctly. Do it first since it is less likely to
42 # grow dependencies on include and lib than vice versa.
43 .if exists(${.CURDIR}/share/info)
47 # We must do include and lib early so that the perl *.ph generation
48 # works correctly as it uses the header files installed by this.
49 .if exists(${.CURDIR}/include)
52 .if exists(${.CURDIR}/lib)
56 .if exists(${.CURDIR}/bin)
59 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
62 .if exists(${.CURDIR}/gnu)
65 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
66 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
69 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
70 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
73 .if exists(${.CURDIR}/libexec)
76 .if exists(${.CURDIR}/sbin)
79 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
82 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
85 .if exists(${.CURDIR}/sys)
88 .if exists(${.CURDIR}/usr.bin)
91 .if exists(${.CURDIR}/usr.sbin)
95 # etc must be last for "distribute" to work
96 .if exists(${.CURDIR}/etc)
100 # These are last, since it is nice to at least get the base system
101 # rebuilt before you do them.
102 .if defined(LOCAL_DIRS)
103 .for _DIR in ${LOCAL_DIRS}
104 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
110 .if defined(NOCLEANDIR)
111 CLEANDIR= clean cleandepend
117 SUP?= /usr/local/bin/cvsup
118 SUPFLAGS?= -g -L 2 -P -
120 SUPFLAGS+= -h ${SUPHOST}
123 MAKEOBJDIRPREFIX?= /usr/obj
124 TARGET_ARCH?= ${MACHINE_ARCH}
127 BUILD_ARCH!= sysctl -n hw.machine_arch
128 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
129 .error To cross-build, set TARGET_ARCH.
132 .if ${MACHINE_ARCH} == ${TARGET_ARCH}
133 OBJTREE= ${MAKEOBJDIRPREFIX}
135 OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET_ARCH}
137 WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
138 # /usr/games added for fortune which depend on strfile
139 STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
140 TMPPATH= ${STRICTTMPPATH}:${PATH}
141 OBJFORMAT_PATH?= /usr/libexec
143 INSTALLTMP!= /usr/bin/mktemp -d -u -t install
146 # Building a world goes through the following stages
148 # 1. bootstrap-tool stage [BMAKE]
149 # This stage is responsible for creating programs that
150 # are needed for backward compatibility reasons. They
151 # are not built as cross-tools.
152 # 2. build-tool stage [TMAKE]
153 # This stage is responsible for creating the object
154 # tree and building any tools that are needed during
156 # 3. cross-tool stage [XMAKE]
157 # This stage is responsible for creating any tools that
158 # are needed for cross-builds. A cross-compiler is one
160 # 4. world stage [WMAKE]
161 # This stage actually builds the world.
162 # 5. install stage (optional) [IMAKE]
163 # This stage installs a previously built world.
166 # Common environment for world related stages
167 CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
168 MACHINE_ARCH=${TARGET_ARCH} \
170 COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
171 LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib \
172 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
173 CFLAGS="-nostdinc ${CFLAGS}" \
174 CXXINCLUDES="-nostdinc++ ${CXXINCLUDES}" \
175 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0 \
176 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
177 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
178 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
180 # bootstrap-tool stage
181 BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
183 INSTALL="sh ${.CURDIR}/tools/install.sh"
184 BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
185 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
189 TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
191 INSTALL="sh ${.CURDIR}/tools/install.sh"
192 TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1
195 XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
198 WMAKEENV= ${CROSSENV} \
199 DESTDIR=${WORLDTMP} \
200 INSTALL="sh ${.CURDIR}/tools/install.sh" \
202 WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
205 IMAKEENV= ${CROSSENV} \
206 PATH=${STRICTTMPPATH}:${INSTALLTMP}
207 IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
210 KMAKEENV= ${WMAKEENV} \
211 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
213 USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
214 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
216 usr/share/groff_font/devX100 \
217 usr/share/groff_font/devX100-12 \
218 usr/share/groff_font/devX75 \
219 usr/share/groff_font/devX75-12 \
220 usr/share/groff_font/devascii \
221 usr/share/groff_font/devcp1047 \
222 usr/share/groff_font/devdvi \
223 usr/share/groff_font/devhtml \
224 usr/share/groff_font/devkoi8-r \
225 usr/share/groff_font/devlatin1 \
226 usr/share/groff_font/devlbp \
227 usr/share/groff_font/devlj4 \
228 usr/share/groff_font/devps \
229 usr/share/groff_font/devutf8 \
230 usr/share/tmac/mdoc usr/share/tmac/mm
232 INCDIRS= arpa g++/std isc objc protocols readline rpc rpcsvc openssl \
238 # Attempt to rebuild the entire system, with reasonable chance of
239 # success, regardless of how old your existing system is.
243 @echo "--------------------------------------------------------------"
244 @echo ">>> Rebuilding the temporary build tree"
245 @echo "--------------------------------------------------------------"
246 .if !defined(NOCLEAN)
249 .for _dir in ${USRDIRS}
250 mkdir -p ${WORLDTMP}/${_dir}
252 .for _dir in ${INCDIRS}
253 mkdir -p ${WORLDTMP}/usr/include/${_dir}
255 ln -sf ${.CURDIR}/sys ${WORLDTMP}
257 @echo "--------------------------------------------------------------"
258 @echo ">>> stage 1: bootstrap tools"
259 @echo "--------------------------------------------------------------"
260 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
261 .if !defined(NOCLEAN)
263 @echo "--------------------------------------------------------------"
264 @echo ">>> stage 2: cleaning up the object tree"
265 @echo "--------------------------------------------------------------"
266 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
269 @echo "--------------------------------------------------------------"
270 @echo ">>> stage 2: rebuilding the object tree"
271 @echo "--------------------------------------------------------------"
272 cd ${.CURDIR}; ${WMAKE} par-obj
274 @echo "--------------------------------------------------------------"
275 @echo ">>> stage 2: build tools"
276 @echo "--------------------------------------------------------------"
277 cd ${.CURDIR}; ${TMAKE} build-tools
279 @echo "--------------------------------------------------------------"
280 @echo ">>> stage 3: cross tools"
281 @echo "--------------------------------------------------------------"
282 cd ${.CURDIR}; ${XMAKE} cross-tools
284 @echo "--------------------------------------------------------------"
285 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
286 @echo "--------------------------------------------------------------"
287 cd ${.CURDIR}; ${WMAKE} SHARED=copies includes
289 @echo "--------------------------------------------------------------"
290 @echo ">>> stage 4: building libraries"
291 @echo "--------------------------------------------------------------"
292 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
294 @echo "--------------------------------------------------------------"
295 @echo ">>> stage 4: make dependencies"
296 @echo "--------------------------------------------------------------"
297 cd ${.CURDIR}; ${WMAKE} par-depend
299 @echo "--------------------------------------------------------------"
300 @echo ">>> stage 4: building everything.."
301 @echo "--------------------------------------------------------------"
302 cd ${.CURDIR}; ${WMAKE} all
305 @echo "--------------------------------------------------------------"
306 @echo ">>> Building everything.."
307 @echo "--------------------------------------------------------------"
308 cd ${.CURDIR}; ${WMAKE} all
313 # Installs everything compiled by a 'buildworld'.
316 mkdir -p ${INSTALLTMP}
317 for prog in [ awk cat chflags chmod chown date echo egrep find grep \
318 ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
319 test true uname wc zic; do \
320 cp `which $$prog` ${INSTALLTMP}; \
322 cd ${.CURDIR}; ${IMAKE} reinstall
328 # If you have a build server, you can NFS mount the source and obj directories
329 # and do a 'make reinstall' on the *client* to install new binaries from the
330 # most recent server build.
333 @echo "--------------------------------------------------------------"
334 @echo ">>> Making hierarchy"
335 @echo "--------------------------------------------------------------"
336 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
338 @echo "--------------------------------------------------------------"
339 @echo ">>> Installing everything.."
340 @echo "--------------------------------------------------------------"
341 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
344 @echo "--------------------------------------------------------------"
345 @echo ">>> Rebuilding man page indices"
346 @echo "--------------------------------------------------------------"
347 cd ${.CURDIR}/share/man; ${MAKE} makedb
353 # Front-end to distribute to make sure the search path contains
354 # the object directory. Needed for miniperl.
357 cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
360 # buildkernel and installkernel
362 # Which kernels to build and/or install is specified by setting
363 # KERNCONF. If not defined a GENERIC kernel is built/installed.
364 # Only the existing (depending TARGET) config files are used
365 # for building kernels and only the first of these is designated
366 # as the one being installed.
368 # Note that we have to use TARGET instead of TARGET_ARCH when
369 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
370 # be set to cross-build, we have to make sure TARGET is set
373 .if !defined(KERNCONF) && defined(KERNEL)
379 INSTKERNNAME?= kernel
381 # The only exotic TARGET_ARCH/TARGET combination valid at this
382 # time is i386/pc98. In all other cases set TARGET equal to
384 .if ${TARGET_ARCH} != "i386" || ${TARGET} != "pc98"
385 TARGET= ${TARGET_ARCH}
388 KRNLSRCDIR= ${.CURDIR}/sys
389 KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf
390 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
391 KERNCONFDIR?= ${KRNLCONFDIR}
395 .for _kernel in ${KERNCONF}
396 .if exists(${KERNCONFDIR}/${_kernel})
397 BUILDKERNELS+= ${_kernel}
398 .if empty(INSTALLKERNEL)
399 INSTALLKERNEL= ${_kernel}
407 # Builds all kernels defined by BUILDKERNELS.
410 .if empty(BUILDKERNELS)
411 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
414 .if defined(KERNWARN)
415 @echo "--------------------------------------------------------------"
416 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
417 @echo "--------------------------------------------------------------"
421 .for _kernel in ${BUILDKERNELS}
422 @echo "--------------------------------------------------------------"
423 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
424 @echo "--------------------------------------------------------------"
425 @echo "===> ${_kernel}"
426 mkdir -p ${KRNLOBJDIR}
427 .if !defined(NO_KERNELCONFIG)
430 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
431 ${KERNCONFDIR}/${_kernel}
433 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
434 .if defined(MODULES_WITH_WORLD) || defined(NO_MODULES) || !exists(${KRNLSRCDIR}/modules)
435 cd ${KRNLOBJDIR}/${_kernel}; \
436 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean
438 cd ${KRNLOBJDIR}/${_kernel}; \
439 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean cleandir
442 cd ${KRNLOBJDIR}/${_kernel}; \
443 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
444 ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
445 .if !defined(NO_KERNELDEPEND)
446 cd ${KRNLOBJDIR}/${_kernel}; \
447 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
449 cd ${KRNLOBJDIR}/${_kernel}; \
450 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
451 @echo "--------------------------------------------------------------"
452 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
453 @echo "--------------------------------------------------------------"
459 # Install the kernel defined by INSTALLKERNEL
462 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
463 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
465 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
466 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
471 # Short hand for `make buildkernel installkernel'
473 kernel: buildkernel installkernel
478 # Update the source tree, by running sup and/or running cvs to update to the
482 .if defined(SUP_UPDATE)
483 @echo "--------------------------------------------------------------"
484 @echo ">>> Running ${SUP}"
485 @echo "--------------------------------------------------------------"
487 @${SUP} ${SUPFLAGS} ${SUPFILE}
489 .if defined(SUPFILE1)
490 @${SUP} ${SUPFLAGS} ${SUPFILE1}
492 .if defined(SUPFILE2)
493 @${SUP} ${SUPFLAGS} ${SUPFILE2}
495 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
496 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
498 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
499 @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
502 .if defined(CVS_UPDATE)
503 @echo "--------------------------------------------------------------"
504 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
505 @echo "--------------------------------------------------------------"
506 cd ${.CURDIR}; ${CVS} -q update -A -P -d
512 # Build most of the user binaries on the existing system libs and includes.
515 @echo "--------------------------------------------------------------"
516 @echo ">>> Building programs only"
517 @echo "--------------------------------------------------------------"
518 cd ${.CURDIR}/bin; ${MAKE} all
519 cd ${.CURDIR}/sbin; ${MAKE} all
520 cd ${.CURDIR}/libexec; ${MAKE} all
521 cd ${.CURDIR}/usr.bin; ${MAKE} all
522 cd ${.CURDIR}/usr.sbin; ${MAKE} all
523 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} all
524 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} all
529 # Install the binaries built by the 'most' target. This does not include
530 # libraries or include files.
533 @echo "--------------------------------------------------------------"
534 @echo ">>> Installing programs only"
535 @echo "--------------------------------------------------------------"
536 cd ${.CURDIR}/bin; ${MAKE} install
537 cd ${.CURDIR}/sbin; ${MAKE} install
538 cd ${.CURDIR}/libexec; ${MAKE} install
539 cd ${.CURDIR}/usr.bin; ${MAKE} install
540 cd ${.CURDIR}/usr.sbin; ${MAKE} install
541 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} install
542 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} install
545 # ------------------------------------------------------------------------
547 # From here onwards are utility targets used by the 'make world' and
548 # related targets. If your 'world' breaks, you may like to try to fix
549 # the problem and manually run the following targets to attempt to
550 # complete the build. Beware, this is *not* guaranteed to work, you
551 # need to have a pretty good grip on the current state of the system
552 # to attempt to manually finish it. If in doubt, 'make world' again.
556 # bootstrap-tools: Build tools needed for compatibility
558 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
559 _strfile= games/fortune/strfile
563 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
564 usr.sbin/config usr.sbin/kbdcontrol \
565 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
566 cd ${.CURDIR}/${_tool}; \
570 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
574 # build-tools: Build special purpose build tools
576 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
577 _games= games/adventure games/hack games/phantasia
580 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
581 _share= share/syscons/scrnmaps
584 .if !defined(NO_FORTRAN)
585 _fortran= gnu/usr.bin/cc/f771
589 _perl= gnu/usr.bin/perl/miniperl
592 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
593 !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
594 _libroken4= kerberosIV/lib/libroken
597 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
598 !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
599 _libkrb5= kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
603 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
604 ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
605 usr.bin/file usr.sbin/sysinstall
606 cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
610 # cross-tools: Build cross-building tools
612 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
613 _elf2exe= usr.sbin/elf2exe
616 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
617 _btxld= usr.sbin/btxld
621 .for _tool in ${_btxld} ${_elf2exe} \
622 gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
623 cd ${.CURDIR}/${_tool}; \
627 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
631 # hierarchy - ensure that all the needed directories are present
634 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
637 # includes - possibly generate and install the include files.
640 cd ${.CURDIR}/include; ${MAKE} -B all install
641 cd ${.CURDIR}/gnu/include; ${MAKE} install
642 cd ${.CURDIR}/gnu/lib/libobjc; ${MAKE} beforeinstall
643 cd ${.CURDIR}/gnu/lib/libreadline/readline; ${MAKE} beforeinstall
644 cd ${.CURDIR}/gnu/lib/libregex; ${MAKE} beforeinstall
645 cd ${.CURDIR}/gnu/lib/libstdc++; ${MAKE} beforeinstall
646 cd ${.CURDIR}/gnu/lib/libdialog; ${MAKE} beforeinstall
647 cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus; ${MAKE} beforeinstall
648 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
649 .if exists(${.CURDIR}/secure/lib/libcrypto)
650 cd ${.CURDIR}/secure/lib/libcrypto; ${MAKE} beforeinstall
652 .if exists(${.CURDIR}/secure/lib/libssl)
653 cd ${.CURDIR}/secure/lib/libssl; ${MAKE} beforeinstall
656 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
657 defined(MAKE_KERBEROS4)
658 cd ${.CURDIR}/kerberosIV/lib/libacl; ${MAKE} beforeinstall
659 cd ${.CURDIR}/kerberosIV/lib/libkadm; ${MAKE} beforeinstall
660 cd ${.CURDIR}/kerberosIV/lib/libkafs; ${MAKE} beforeinstall
661 cd ${.CURDIR}/kerberosIV/lib/libkdb; ${MAKE} beforeinstall
662 cd ${.CURDIR}/kerberosIV/lib/libkrb; ${MAKE} beforeinstall
663 cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
664 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
665 cd ${.CURDIR}/secure/lib/libtelnet; ${MAKE} beforeinstall
667 cd ${.CURDIR}/lib/libtelnet; ${MAKE} beforeinstall
669 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
670 defined(MAKE_KERBEROS5)
671 cd ${.CURDIR}/kerberos5/lib/libasn1; ${MAKE} beforeinstall
672 cd ${.CURDIR}/kerberos5/lib/libhdb; ${MAKE} beforeinstall
673 cd ${.CURDIR}/kerberos5/lib/libkadm5clnt; ${MAKE} beforeinstall
674 cd ${.CURDIR}/kerberos5/lib/libkadm5srv; ${MAKE} beforeinstall
675 cd ${.CURDIR}/kerberos5/lib/libkafs5; ${MAKE} beforeinstall
676 cd ${.CURDIR}/kerberos5/lib/libkrb5; ${MAKE} beforeinstall
677 cd ${.CURDIR}/kerberos5/lib/libsl; ${MAKE} beforeinstall
679 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
680 cd ${.CURDIR}/lib/csu/${MACHINE_ARCH}; ${MAKE} beforeinstall
682 cd ${.CURDIR}/gnu/lib/csu; ${MAKE} beforeinstall
683 cd ${.CURDIR}/lib/libalias; ${MAKE} beforeinstall
684 cd ${.CURDIR}/lib/libatm; ${MAKE} beforeinstall
685 cd ${.CURDIR}/lib/libdevstat; ${MAKE} beforeinstall
686 cd ${.CURDIR}/lib/libc; ${MAKE} beforeinstall
687 cd ${.CURDIR}/lib/libcalendar; ${MAKE} beforeinstall
688 cd ${.CURDIR}/lib/libcam; ${MAKE} beforeinstall
689 cd ${.CURDIR}/lib/libdisk; ${MAKE} beforeinstall
690 cd ${.CURDIR}/lib/libedit; ${MAKE} beforeinstall
691 cd ${.CURDIR}/lib/libfetch; ${MAKE} beforeinstall
692 cd ${.CURDIR}/lib/libftpio; ${MAKE} beforeinstall
693 cd ${.CURDIR}/lib/libkvm; ${MAKE} beforeinstall
694 cd ${.CURDIR}/lib/libmd; ${MAKE} beforeinstall
695 cd ${.CURDIR}/lib/libmp; ${MAKE} beforeinstall
696 cd ${.CURDIR}/lib/msun; ${MAKE} beforeinstall
697 cd ${.CURDIR}/lib/libncp; ${MAKE} beforeinstall
698 cd ${.CURDIR}/lib/libncurses; ${MAKE} beforeinstall
699 cd ${.CURDIR}/lib/libnetgraph; ${MAKE} beforeinstall
700 cd ${.CURDIR}/lib/libopie; ${MAKE} beforeinstall
701 cd ${.CURDIR}/lib/libpcap; ${MAKE} beforeinstall
702 cd ${.CURDIR}/lib/libradius; ${MAKE} beforeinstall
703 cd ${.CURDIR}/lib/librpcsvc; ${MAKE} beforeinstall
704 cd ${.CURDIR}/lib/libpam/libpam; ${MAKE} beforeinstall
705 cd ${.CURDIR}/lib/libsbuf; ${MAKE} beforeinstall
706 cd ${.CURDIR}/lib/libstand; ${MAKE} beforeinstall
707 cd ${.CURDIR}/lib/libtacplus; ${MAKE} beforeinstall
708 cd ${.CURDIR}/lib/libcom_err; ${MAKE} beforeinstall
709 cd ${.CURDIR}/lib/libutil; ${MAKE} beforeinstall
710 cd ${.CURDIR}/lib/libvgl; ${MAKE} beforeinstall
711 cd ${.CURDIR}/lib/libwrap; ${MAKE} beforeinstall
712 cd ${.CURDIR}/lib/libz; ${MAKE} beforeinstall
713 cd ${.CURDIR}/usr.bin/lex; ${MAKE} beforeinstall
716 # libraries - build all libraries, and install them under ${DESTDIR}.
718 # The following dependencies exist between the libraries:
720 # lib*: csu libgcc_pic
725 # libdialog: libncurses
726 # libedit: libncurses
730 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
731 # librpcsvc libtacplus libutil libz libssh
733 # libreadline: libncurses
737 # Across directories this comes down to (rougly):
739 # gnu/lib: lib/msun lib/libncurses
740 # kerberosIV/lib kerberos5/lib: lib/libcrypt
741 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
742 # secure/lib/libssh lib/libz
743 # secure/lib: lib/libmd
745 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
746 _csu= lib/csu/${MACHINE_ARCH}.pcc
747 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
748 _csu= lib/csu/i386-elf
750 _csu= lib/csu/${MACHINE_ARCH}
753 .if !defined(NOSECURE) && !defined(NOCRYPT)
754 _secure_lib= secure/lib
757 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
758 _kerberosIV_lib= kerberosIV/lib
761 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
762 _kerberos5_lib= kerberos5/lib
765 .if ${MACHINE_ARCH} == "i386"
766 _libkeycap= usr.sbin/pcvt/keycap
770 _libperl= gnu/usr.bin/perl/libperl
774 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
775 ${_secure_lib} ${_kerberosIV_lib} \
776 ${_kerberos5_lib} lib/libcom_err lib/libkvm lib/msun lib/libncurses \
777 lib/libopie lib/libradius lib/librpcsvc lib/libsbuf lib/libtacplus \
778 lib/libutil lib/libz lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
779 .if exists(${.CURDIR}/${_lib})
780 cd ${.CURDIR}/${_lib}; \
787 .for __target in clean cleandepend cleandir depend obj
788 .for entry in ${SUBDIR}
789 ${entry}.${__target}__D: .PHONY
790 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
791 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
792 edir=${entry}.${MACHINE_ARCH}; \
793 cd ${.CURDIR}/$${edir}; \
795 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
797 cd ${.CURDIR}/$${edir}; \
799 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
801 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
804 .include <bsd.subdir.mk>