4 # Make command line options:
5 # -DMAKE_KERBEROS4 to build KerberosIV
6 # -DMAKE_KERBEROS5 to build Kerberos5
7 # -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8 # -DNOCLEAN do not clean at all
9 # -DNOCRYPT will prevent building of crypt versions
10 # -DNOPROFILE do not build profiled libraries
11 # -DNOSECURE do not go into secure subdir
12 # -DNOGAMES do not go into games subdir
13 # -DNOSHARE do not go into share subdir
14 # -DNOINFO do not make or install info files
15 # -DNOLIBC_R do not build libc_r.
16 # -DNO_FORTRAN do not build g77 and related libraries.
17 # -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18 # -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19 # -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20 # -DNO_PORTSUPDATE do not update ports in ${MAKE} update
21 # -DNO_DOCUPDATE do not update doc in ${MAKE} update
22 # LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23 # TARGET_ARCH="arch" to crossbuild world to a different arch
26 # The intended user-driven targets are:
27 # buildworld - rebuild *everything*, including glue to help do upgrades
28 # installworld- install everything built by "buildworld"
29 # update - convenient way to update your source tree (eg: sup/cvs)
30 # most - build user commands, no libraries or include files
31 # installmost - install user commands, no libraries or include files
33 # Standard targets (not defined here) are documented in the makefiles in
34 # /usr/share/mk. These include:
35 # obj depend all install clean cleandepend cleanobj
37 # Put initial settings here.
40 # We must do share/info early so that installation of info `dir'
41 # entries works correctly. Do it first since it is less likely to
42 # grow dependencies on include and lib than vice versa.
43 .if exists(${.CURDIR}/share/info)
47 # We must do include and lib early so that the perl *.ph generation
48 # works correctly as it uses the header files installed by this.
49 .if exists(${.CURDIR}/include)
52 .if exists(${.CURDIR}/lib)
56 .if exists(${.CURDIR}/bin)
59 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
62 .if exists(${.CURDIR}/gnu)
65 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
66 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
69 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
70 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
73 .if exists(${.CURDIR}/libexec)
76 .if exists(${.CURDIR}/sbin)
79 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
82 .if exists(${.CURDIR}/sys)
85 .if exists(${.CURDIR}/usr.bin)
88 .if exists(${.CURDIR}/usr.sbin)
91 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
95 # etc must be last for "distribute" to work
96 .if exists(${.CURDIR}/etc)
100 # These are last, since it is nice to at least get the base system
101 # rebuilt before you do them.
102 .if defined(LOCAL_DIRS)
103 .for _DIR in ${LOCAL_DIRS}
104 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
110 .if defined(NOCLEANDIR)
111 CLEANDIR= clean cleandepend
117 SUP?= /usr/local/bin/cvsup
118 SUPFLAGS?= -g -L 2 -P -
120 SUPFLAGS+= -h ${SUPHOST}
123 MAKEOBJDIRPREFIX?= /usr/obj
124 TARGET_ARCH?= ${MACHINE_ARCH}
127 BUILD_ARCH!= sysctl -n hw.machine_arch
128 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
129 .error To cross-build, set TARGET_ARCH.
132 .if ${MACHINE_ARCH} == ${TARGET_ARCH}
133 OBJTREE= ${MAKEOBJDIRPREFIX}
135 OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET_ARCH}
137 WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
138 # /usr/games added for fortune which depend on strfile
139 STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
140 TMPPATH= ${STRICTTMPPATH}:${PATH}
141 OBJFORMAT_PATH?= /usr/libexec
145 INSTALLTMP= ${TMPDIR}/install.${TMPPID}
148 # Building a world goes through the following stages
150 # 1. bootstrap-tool stage [BMAKE]
151 # This stage is responsible for creating programs that
152 # are needed for backward compatibility reasons. They
153 # are not built as cross-tools.
154 # 2. build-tool stage [TMAKE]
155 # This stage is responsible for creating the object
156 # tree and building any tools that are needed during
158 # 3. cross-tool stage [XMAKE]
159 # This stage is responsible for creating any tools that
160 # are needed for cross-builds. A cross-compiler is one
162 # 4. world stage [WMAKE]
163 # This stage actually builds the world.
164 # 5. install stage (optional) [IMAKE]
165 # This stage installs a previously built world.
168 # Common environment for world related stages
169 CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
170 MACHINE_ARCH=${TARGET_ARCH} \
172 COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
173 LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib \
174 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
175 CFLAGS="-nostdinc ${CFLAGS}" \
176 CXXINCLUDES="-nostdinc++ ${CXXINCLUDES}" \
177 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0 \
178 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
179 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
180 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
182 # bootstrap-tool stage
183 BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
185 INSTALL="sh ${.CURDIR}/tools/install.sh"
186 BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
187 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED
190 TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
192 INSTALL="sh ${.CURDIR}/tools/install.sh"
193 TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1
196 XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
199 WMAKEENV= ${CROSSENV} \
200 DESTDIR=${WORLDTMP} \
201 INSTALL="sh ${.CURDIR}/tools/install.sh" \
203 WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
206 IMAKEENV= ${CROSSENV} \
207 PATH=${STRICTTMPPATH}:${INSTALLTMP}
208 IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
211 KMAKEENV= ${WMAKEENV} \
212 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
214 USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
215 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
217 usr/share/groff_font/devX100 \
218 usr/share/groff_font/devX100-12 \
219 usr/share/groff_font/devX75 \
220 usr/share/groff_font/devX75-12 \
221 usr/share/groff_font/devascii \
222 usr/share/groff_font/devcp1047 \
223 usr/share/groff_font/devdvi \
224 usr/share/groff_font/devhtml \
225 usr/share/groff_font/devkoi8-r \
226 usr/share/groff_font/devlatin1 \
227 usr/share/groff_font/devlbp \
228 usr/share/groff_font/devlj4 \
229 usr/share/groff_font/devps \
230 usr/share/groff_font/devutf8 \
231 usr/share/tmac/mdoc usr/share/tmac/mm
233 INCDIRS= arpa g++/std isc objc protocols readline rpc rpcsvc openssl \
239 # Attempt to rebuild the entire system, with reasonable chance of
240 # success, regardless of how old your existing system is.
244 @echo "--------------------------------------------------------------"
245 @echo ">>> Rebuilding the temporary build tree"
246 @echo "--------------------------------------------------------------"
247 .if !defined(NOCLEAN)
250 .for _dir in ${USRDIRS}
251 mkdir -p ${WORLDTMP}/${_dir}
253 .for _dir in ${INCDIRS}
254 mkdir -p ${WORLDTMP}/usr/include/${_dir}
256 ln -sf ${.CURDIR}/sys ${WORLDTMP}
258 @echo "--------------------------------------------------------------"
259 @echo ">>> stage 1: bootstrap tools"
260 @echo "--------------------------------------------------------------"
261 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
262 .if !defined(NOCLEAN)
264 @echo "--------------------------------------------------------------"
265 @echo ">>> stage 2: cleaning up the object tree"
266 @echo "--------------------------------------------------------------"
267 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
270 @echo "--------------------------------------------------------------"
271 @echo ">>> stage 2: rebuilding the object tree"
272 @echo "--------------------------------------------------------------"
273 cd ${.CURDIR}; ${WMAKE} par-obj
275 @echo "--------------------------------------------------------------"
276 @echo ">>> stage 2: build tools"
277 @echo "--------------------------------------------------------------"
278 cd ${.CURDIR}; ${TMAKE} build-tools
280 @echo "--------------------------------------------------------------"
281 @echo ">>> stage 3: cross tools"
282 @echo "--------------------------------------------------------------"
283 cd ${.CURDIR}; ${XMAKE} cross-tools
285 @echo "--------------------------------------------------------------"
286 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
287 @echo "--------------------------------------------------------------"
288 cd ${.CURDIR}; ${WMAKE} SHARED=copies includes
290 @echo "--------------------------------------------------------------"
291 @echo ">>> stage 4: building libraries"
292 @echo "--------------------------------------------------------------"
293 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
295 @echo "--------------------------------------------------------------"
296 @echo ">>> stage 4: make dependencies"
297 @echo "--------------------------------------------------------------"
298 cd ${.CURDIR}; ${WMAKE} par-depend
300 @echo "--------------------------------------------------------------"
301 @echo ">>> stage 4: building everything.."
302 @echo "--------------------------------------------------------------"
303 cd ${.CURDIR}; ${WMAKE} all
306 @echo "--------------------------------------------------------------"
307 @echo ">>> Building everything.."
308 @echo "--------------------------------------------------------------"
309 cd ${.CURDIR}; ${WMAKE} all
314 # Installs everything compiled by a 'buildworld'.
317 mkdir -p ${INSTALLTMP}
318 for prog in [ awk cat chflags chmod chown date echo egrep find grep \
319 ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
320 test true uname wc zic; do \
321 cp `which $$prog` ${INSTALLTMP}; \
323 cd ${.CURDIR}; ${IMAKE} reinstall
329 # If you have a build server, you can NFS mount the source and obj directories
330 # and do a 'make reinstall' on the *client* to install new binaries from the
331 # most recent server build.
334 @echo "--------------------------------------------------------------"
335 @echo ">>> Making hierarchy"
336 @echo "--------------------------------------------------------------"
337 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
339 @echo "--------------------------------------------------------------"
340 @echo ">>> Installing everything.."
341 @echo "--------------------------------------------------------------"
342 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
345 @echo "--------------------------------------------------------------"
346 @echo ">>> Rebuilding man page indices"
347 @echo "--------------------------------------------------------------"
348 cd ${.CURDIR}/share/man; ${MAKE} makedb
354 # Front-end to distribute to make sure the search path contains
355 # the object directory. Needed for miniperl.
358 cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
361 # buildkernel and installkernel
363 # Which kernels to build and/or install is specified by setting
364 # KERNCONF. If not defined a GENERIC kernel is built/installed.
365 # Only the existing (depending TARGET) config files are used
366 # for building kernels and only the first of these is designated
367 # as the one being installed.
369 # Note that we have to use TARGET instead of TARGET_ARCH when
370 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
371 # be set to cross-build, we have to make sure TARGET is set
374 .if !defined(KERNCONF) && defined(KERNEL)
380 INSTKERNNAME?= kernel
382 # The only exotic TARGET_ARCH/TARGET combination valid at this
383 # time is i386/pc98. In all other cases set TARGET equal to
385 .if ${TARGET_ARCH} != "i386" || ${TARGET} != "pc98"
386 TARGET= ${TARGET_ARCH}
389 KRNLSRCDIR= ${.CURDIR}/sys
390 KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf
391 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
392 KERNCONFDIR?= ${KRNLCONFDIR}
396 .for _kernel in ${KERNCONF}
397 .if exists(${KERNCONFDIR}/${_kernel})
398 BUILDKERNELS+= ${_kernel}
399 .if empty(INSTALLKERNEL)
400 INSTALLKERNEL= ${_kernel}
408 # Builds all kernels defined by BUILDKERNELS.
411 .if empty(BUILDKERNELS)
412 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
415 .if defined(KERNWARN)
416 @echo "--------------------------------------------------------------"
417 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
418 @echo "--------------------------------------------------------------"
422 .for _kernel in ${BUILDKERNELS}
423 @echo "--------------------------------------------------------------"
424 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
425 @echo "--------------------------------------------------------------"
426 @echo "===> ${_kernel}"
427 mkdir -p ${KRNLOBJDIR}
428 .if !defined(NO_KERNELCONFIG)
431 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
432 ${KERNCONFDIR}/${_kernel}
434 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
435 .if defined(MODULES_WITH_WORLD) || defined(NO_MODULES) || !exists(${KRNLSRCDIR}/modules)
436 cd ${KRNLOBJDIR}/${_kernel}; \
437 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean
439 cd ${KRNLOBJDIR}/${_kernel}; \
440 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean cleandir
443 cd ${KRNLOBJDIR}/${_kernel}; \
444 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
445 ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
446 .if !defined(NO_KERNELDEPEND)
447 cd ${KRNLOBJDIR}/${_kernel}; \
448 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
450 cd ${KRNLOBJDIR}/${_kernel}; \
451 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
452 @echo "--------------------------------------------------------------"
453 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
454 @echo "--------------------------------------------------------------"
460 # Install the kernel defined by INSTALLKERNEL
463 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
464 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
466 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
467 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
472 # Short hand for `make buildkernel installkernel'
474 kernel: buildkernel installkernel
479 # Update the source tree, by running sup and/or running cvs to update to the
483 .if defined(SUP_UPDATE)
484 @echo "--------------------------------------------------------------"
485 @echo ">>> Running ${SUP}"
486 @echo "--------------------------------------------------------------"
488 @${SUP} ${SUPFLAGS} ${SUPFILE}
490 .if defined(SUPFILE1)
491 @${SUP} ${SUPFLAGS} ${SUPFILE1}
493 .if defined(SUPFILE2)
494 @${SUP} ${SUPFLAGS} ${SUPFILE2}
496 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
497 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
499 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
500 @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
503 .if defined(CVS_UPDATE)
504 @echo "--------------------------------------------------------------"
505 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
506 @echo "--------------------------------------------------------------"
507 cd ${.CURDIR}; ${CVS} -q update -A -P -d
513 # Build most of the user binaries on the existing system libs and includes.
516 @echo "--------------------------------------------------------------"
517 @echo ">>> Building programs only"
518 @echo "--------------------------------------------------------------"
519 cd ${.CURDIR}/bin; ${MAKE} all
520 cd ${.CURDIR}/sbin; ${MAKE} all
521 cd ${.CURDIR}/libexec; ${MAKE} all
522 cd ${.CURDIR}/usr.bin; ${MAKE} all
523 cd ${.CURDIR}/usr.sbin; ${MAKE} all
524 cd ${.CURDIR}/gnu/libexec; ${MAKE} all
525 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} all
526 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} all
531 # Install the binaries built by the 'most' target. This does not include
532 # libraries or include files.
535 @echo "--------------------------------------------------------------"
536 @echo ">>> Installing programs only"
537 @echo "--------------------------------------------------------------"
538 cd ${.CURDIR}/bin; ${MAKE} install
539 cd ${.CURDIR}/sbin; ${MAKE} install
540 cd ${.CURDIR}/libexec; ${MAKE} install
541 cd ${.CURDIR}/usr.bin; ${MAKE} install
542 cd ${.CURDIR}/usr.sbin; ${MAKE} install
543 cd ${.CURDIR}/gnu/libexec; ${MAKE} install
544 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} install
545 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} install
548 # ------------------------------------------------------------------------
550 # From here onwards are utility targets used by the 'make world' and
551 # related targets. If your 'world' breaks, you may like to try to fix
552 # the problem and manually run the following targets to attempt to
553 # complete the build. Beware, this is *not* guaranteed to work, you
554 # need to have a pretty good grip on the current state of the system
555 # to attempt to manually finish it. If in doubt, 'make world' again.
559 # bootstrap-tools: Build tools needed for compatibility
561 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
562 _strfile= games/fortune/strfile
566 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
567 usr.sbin/config usr.sbin/kbdcontrol \
568 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
569 cd ${.CURDIR}/${_tool}; \
573 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
577 # build-tools: Build special purpose build tools
579 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
580 _games= games/adventure games/hack games/phantasia
583 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
584 _share= share/syscons/scrnmaps
587 .if !defined(NO_FORTRAN)
588 _fortran= gnu/usr.bin/cc/f771
592 _perl= gnu/usr.bin/perl/miniperl
595 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
596 !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
597 _libroken4= kerberosIV/lib/libroken
600 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
601 !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
602 _libkrb5= kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
606 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
607 ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
608 usr.bin/file usr.sbin/sysinstall
609 cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
613 # cross-tools: Build cross-building tools
615 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
616 _elf2exe= usr.sbin/elf2exe
619 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
620 _btxld= usr.sbin/btxld
624 .for _tool in ${_btxld} ${_elf2exe} \
625 gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
626 cd ${.CURDIR}/${_tool}; \
630 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
634 # hierarchy - ensure that all the needed directories are present
637 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
640 # includes - possibly generate and install the include files.
643 cd ${.CURDIR}/include; ${MAKE} -B all install
644 cd ${.CURDIR}/gnu/include; ${MAKE} install
645 cd ${.CURDIR}/gnu/lib/libobjc; ${MAKE} beforeinstall
646 cd ${.CURDIR}/gnu/lib/libreadline/readline; ${MAKE} beforeinstall
647 cd ${.CURDIR}/gnu/lib/libregex; ${MAKE} beforeinstall
648 cd ${.CURDIR}/gnu/lib/libstdc++; ${MAKE} beforeinstall
649 cd ${.CURDIR}/gnu/lib/libdialog; ${MAKE} beforeinstall
650 cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus; ${MAKE} beforeinstall
651 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
652 .if exists(${.CURDIR}/secure/lib/libcrypto)
653 cd ${.CURDIR}/secure/lib/libcrypto; ${MAKE} beforeinstall
655 .if exists(${.CURDIR}/secure/lib/libssl)
656 cd ${.CURDIR}/secure/lib/libssl; ${MAKE} beforeinstall
659 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
660 defined(MAKE_KERBEROS4)
661 cd ${.CURDIR}/kerberosIV/lib/libacl; ${MAKE} beforeinstall
662 cd ${.CURDIR}/kerberosIV/lib/libkadm; ${MAKE} beforeinstall
663 cd ${.CURDIR}/kerberosIV/lib/libkafs; ${MAKE} beforeinstall
664 cd ${.CURDIR}/kerberosIV/lib/libkdb; ${MAKE} beforeinstall
665 cd ${.CURDIR}/kerberosIV/lib/libkrb; ${MAKE} beforeinstall
666 cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
667 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
668 cd ${.CURDIR}/secure/lib/libtelnet; ${MAKE} beforeinstall
670 cd ${.CURDIR}/lib/libtelnet; ${MAKE} beforeinstall
672 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
673 defined(MAKE_KERBEROS5)
674 cd ${.CURDIR}/kerberos5/lib/libasn1; ${MAKE} beforeinstall
675 cd ${.CURDIR}/kerberos5/lib/libhdb; ${MAKE} beforeinstall
676 cd ${.CURDIR}/kerberos5/lib/libkadm5clnt; ${MAKE} beforeinstall
677 cd ${.CURDIR}/kerberos5/lib/libkadm5srv; ${MAKE} beforeinstall
678 cd ${.CURDIR}/kerberos5/lib/libkafs5; ${MAKE} beforeinstall
679 cd ${.CURDIR}/kerberos5/lib/libkrb5; ${MAKE} beforeinstall
680 cd ${.CURDIR}/kerberos5/lib/libsl; ${MAKE} beforeinstall
682 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
683 cd ${.CURDIR}/lib/csu/${MACHINE_ARCH}; ${MAKE} beforeinstall
685 cd ${.CURDIR}/gnu/lib/csu; ${MAKE} beforeinstall
686 cd ${.CURDIR}/lib/libalias; ${MAKE} beforeinstall
687 cd ${.CURDIR}/lib/libatm; ${MAKE} beforeinstall
688 cd ${.CURDIR}/lib/libdevstat; ${MAKE} beforeinstall
689 cd ${.CURDIR}/lib/libc; ${MAKE} beforeinstall
690 cd ${.CURDIR}/lib/libcalendar; ${MAKE} beforeinstall
691 cd ${.CURDIR}/lib/libcam; ${MAKE} beforeinstall
692 cd ${.CURDIR}/lib/libdisk; ${MAKE} beforeinstall
693 cd ${.CURDIR}/lib/libedit; ${MAKE} beforeinstall
694 cd ${.CURDIR}/lib/libfetch; ${MAKE} beforeinstall
695 cd ${.CURDIR}/lib/libftpio; ${MAKE} beforeinstall
696 cd ${.CURDIR}/lib/libkvm; ${MAKE} beforeinstall
697 cd ${.CURDIR}/lib/libmd; ${MAKE} beforeinstall
698 cd ${.CURDIR}/lib/libmp; ${MAKE} beforeinstall
699 .if !defined(WANT_CSRG_LIBM)
700 cd ${.CURDIR}/lib/msun; ${MAKE} beforeinstall
702 cd ${.CURDIR}/lib/libncp; ${MAKE} beforeinstall
703 cd ${.CURDIR}/lib/libncurses; ${MAKE} beforeinstall
704 cd ${.CURDIR}/lib/libnetgraph; ${MAKE} beforeinstall
705 cd ${.CURDIR}/lib/libopie; ${MAKE} beforeinstall
706 cd ${.CURDIR}/lib/libpcap; ${MAKE} beforeinstall
707 cd ${.CURDIR}/lib/libradius; ${MAKE} beforeinstall
708 cd ${.CURDIR}/lib/librpcsvc; ${MAKE} beforeinstall
709 cd ${.CURDIR}/lib/libpam/libpam; ${MAKE} beforeinstall
710 cd ${.CURDIR}/lib/libsbuf; ${MAKE} beforeinstall
711 cd ${.CURDIR}/lib/libstand; ${MAKE} beforeinstall
712 cd ${.CURDIR}/lib/libtacplus; ${MAKE} beforeinstall
713 cd ${.CURDIR}/lib/libcom_err; ${MAKE} beforeinstall
714 cd ${.CURDIR}/lib/libutil; ${MAKE} beforeinstall
715 cd ${.CURDIR}/lib/libvgl; ${MAKE} beforeinstall
716 cd ${.CURDIR}/lib/libwrap; ${MAKE} beforeinstall
717 cd ${.CURDIR}/lib/libz; ${MAKE} beforeinstall
718 cd ${.CURDIR}/usr.bin/lex; ${MAKE} beforeinstall
721 # libraries - build all libraries, and install them under ${DESTDIR}.
723 # The following dependencies exist between the libraries:
725 # lib*: csu libgcc_pic
730 # libdialog: libncurses
731 # libedit: libncurses
735 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
736 # librpcsvc libtacplus libutil libz libssh
738 # libreadline: libncurses
742 # Across directories this comes down to (rougly):
744 # gnu/lib: lib/libm lib/libncurses
745 # kerberosIV/lib kerberos5/lib: lib/libcrypt
746 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
747 # secure/lib/libssh lib/libz
748 # secure/lib: lib/libmd
750 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
751 _csu= lib/csu/${MACHINE_ARCH}.pcc
752 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
753 _csu= lib/csu/i386-elf
755 _csu= lib/csu/${MACHINE_ARCH}
758 .if !defined(NOSECURE) && !defined(NOCRYPT)
759 _secure_lib= secure/lib
762 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
763 _kerberosIV_lib= kerberosIV/lib
766 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
767 _kerberos5_lib= kerberos5/lib
770 .if defined(WANT_CSRG_LIBM)
776 .if ${MACHINE_ARCH} == "i386"
777 _libkeycap= usr.sbin/pcvt/keycap
781 _libperl= gnu/usr.bin/perl/libperl
785 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
786 ${_secure_lib} ${_kerberosIV_lib} \
787 ${_kerberos5_lib} lib/libcom_err lib/libkvm ${_libm} lib/libncurses \
788 lib/libopie lib/libradius lib/librpcsvc lib/libsbuf lib/libtacplus \
789 lib/libutil lib/libz lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
790 .if exists(${.CURDIR}/${_lib})
791 cd ${.CURDIR}/${_lib}; \
798 .for __target in clean cleandepend cleandir depend obj
799 .for entry in ${SUBDIR}
800 ${entry}.${__target}__D: .PHONY
801 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
802 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
803 edir=${entry}.${MACHINE_ARCH}; \
804 cd ${.CURDIR}/$${edir}; \
806 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
808 cd ${.CURDIR}/$${edir}; \
810 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
812 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
815 .include <bsd.subdir.mk>