Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DMAKE_KERBEROS4 to build KerberosIV
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNOSECURE do not go into secure subdir
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24
  25 #
  26 # The intended user-driven targets are:
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # installworld- install everything built by "buildworld"
  29 # update      - convenient way to update your source tree (eg: sup/cvs)
  30 # most        - build user commands, no libraries or include files
  31 # installmost - install user commands, no libraries or include files
  32 #
  33 # Standard targets (not defined here) are documented in the makefiles in
  34 # /usr/share/mk.  These include:
  35 #               obj depend all install clean cleandepend cleanobj
  36
  37 # Put initial settings here.
  38 SUBDIR=
  39
  40 # We must do share/info early so that installation of info `dir'
  41 # entries works correctly.  Do it first since it is less likely to
  42 # grow dependencies on include and lib than vice versa.
  43 .if exists(${.CURDIR}/share/info)
  44 SUBDIR+= share/info
  45 .endif
  46
  47 # We must do include and lib early so that the perl *.ph generation
  48 # works correctly as it uses the header files installed by this.
  49 .if exists(${.CURDIR}/include)
  50 SUBDIR+= include
  51 .endif
  52 .if exists(${.CURDIR}/lib)
  53 SUBDIR+= lib
  54 .endif
  55
  56 .if exists(${.CURDIR}/bin)
  57 SUBDIR+= bin
  58 .endif
  59 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  60 SUBDIR+= games
  61 .endif
  62 .if exists(${.CURDIR}/gnu)
  63 SUBDIR+= gnu
  64 .endif
  65 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
  66     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
  67 SUBDIR+= kerberosIV
  68 .endif
  69 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  70     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  71 SUBDIR+= kerberos5
  72 .endif
  73 .if exists(${.CURDIR}/libexec)
  74 SUBDIR+= libexec
  75 .endif
  76 .if exists(${.CURDIR}/sbin)
  77 SUBDIR+= sbin
  78 .endif
  79 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
  80 SUBDIR+= secure
  81 .endif
  82 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  83 SUBDIR+= share
  84 .endif
  85 .if exists(${.CURDIR}/sys)
  86 SUBDIR+= sys
  87 .endif
  88 .if exists(${.CURDIR}/usr.bin)
  89 SUBDIR+= usr.bin
  90 .endif
  91 .if exists(${.CURDIR}/usr.sbin)
  92 SUBDIR+= usr.sbin
  93 .endif
  94
  95 # etc must be last for "distribute" to work
  96 .if exists(${.CURDIR}/etc)
  97 SUBDIR+= etc
  98 .endif
  99
 100 # These are last, since it is nice to at least get the base system
 101 # rebuilt before you do them.
 102 .if defined(LOCAL_DIRS)
 103 .for _DIR in ${LOCAL_DIRS}
 104 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 105 SUBDIR+= ${_DIR}
 106 .endif
 107 .endfor
 108 .endif
 109
 110 .if defined(NOCLEANDIR)
 111 CLEANDIR=       clean cleandepend
 112 .else
 113 CLEANDIR=       cleandir
 114 .endif
 115
 116 CVS?=           cvs
 117 SUP?=           /usr/local/bin/cvsup
 118 SUPFLAGS?=      -g -L 2 -P -
 119 .if defined(SUPHOST)
 120 SUPFLAGS+=      -h ${SUPHOST}
 121 .endif
 122
 123 MAKEOBJDIRPREFIX?=      /usr/obj
 124 TARGET_ARCH?=   ${MACHINE_ARCH}
 125 TARGET?=        ${MACHINE}
 126 .if make(buildworld)
 127 BUILD_ARCH!=    sysctl -n hw.machine_arch
 128 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 129 .error To cross-build, set TARGET_ARCH.
 130 .endif
 131 .endif
 132 .if ${MACHINE_ARCH} == ${TARGET_ARCH}
 133 OBJTREE=        ${MAKEOBJDIRPREFIX}
 134 .else
 135 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET_ARCH}
 136 .endif
 137 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 138 # /usr/games added for fortune which depend on strfile
 139 STRICTTMPPATH=  ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 140 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 141 OBJFORMAT_PATH?=        /usr/libexec
 142
 143 TMPDIR?=        /tmp
 144 TMPPID!=        echo $$$$
 145 INSTALLTMP=     ${TMPDIR}/install.${TMPPID}
 146
 147 #
 148 # Building a world goes through the following stages
 149 #
 150 # 1. bootstrap-tool stage [BMAKE]
 151 #       This stage is responsible for creating programs that
 152 #       are needed for backward compatibility reasons. They
 153 #       are not built as cross-tools.
 154 # 2. build-tool stage [TMAKE]
 155 #       This stage is responsible for creating the object
 156 #       tree and building any tools that are needed during
 157 #       the build process.
 158 # 3. cross-tool stage [XMAKE]
 159 #       This stage is responsible for creating any tools that
 160 #       are needed for cross-builds. A cross-compiler is one
 161 #       of them.
 162 # 4. world stage [WMAKE]
 163 #       This stage actually builds the world.
 164 # 5. install stage (optional) [IMAKE]
 165 #       This stage installs a previously built world.
 166 #
 167
 168 # Common environment for world related stages
 169 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 170                 MACHINE_ARCH=${TARGET_ARCH} \
 171                 MACHINE=${TARGET} \
 172                 COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
 173                 LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib \
 174                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
 175                 CFLAGS="-nostdinc ${CFLAGS}" \
 176                 CXXINCLUDES="-nostdinc++ ${CXXINCLUDES}" \
 177                 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0 \
 178                 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
 179                 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
 180                 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
 181
 182 # bootstrap-tool stage
 183 BMAKEENV=       MAKEOBJDIRPREFIX=${WORLDTMP} \
 184                 DESTDIR= \
 185                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 186 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 187                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 188                 -DNO_WERROR
 189
 190 # build-tool stage
 191 TMAKEENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 192                 DESTDIR= \
 193                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 194 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1
 195
 196 # cross-tool stage
 197 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 198
 199 # world stage
 200 WMAKEENV=       ${CROSSENV} \
 201                 DESTDIR=${WORLDTMP} \
 202                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 203                 PATH=${TMPPATH}
 204 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 205
 206 # install stage
 207 IMAKEENV=       ${CROSSENV} \
 208                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 209 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 210
 211 # kernel stage
 212 KMAKEENV=       ${WMAKEENV} \
 213                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
 214
 215 USRDIRS=        usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
 216                 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
 217                 usr/share/dict \
 218                 usr/share/groff_font/devX100 \
 219                 usr/share/groff_font/devX100-12 \
 220                 usr/share/groff_font/devX75 \
 221                 usr/share/groff_font/devX75-12 \
 222                 usr/share/groff_font/devascii \
 223                 usr/share/groff_font/devcp1047 \
 224                 usr/share/groff_font/devdvi \
 225                 usr/share/groff_font/devhtml \
 226                 usr/share/groff_font/devkoi8-r \
 227                 usr/share/groff_font/devlatin1 \
 228                 usr/share/groff_font/devlbp \
 229                 usr/share/groff_font/devlj4 \
 230                 usr/share/groff_font/devps \
 231                 usr/share/groff_font/devutf8 \
 232                 usr/share/tmac/mdoc usr/share/tmac/mm
 233
 234 INCDIRS=        arpa g++/std isc objc protocols readline rpc rpcsvc openssl \
 235                 security
 236
 237 #
 238 # buildworld
 239 #
 240 # Attempt to rebuild the entire system, with reasonable chance of
 241 # success, regardless of how old your existing system is.
 242 #
 243 buildworld:
 244         @echo
 245         @echo "--------------------------------------------------------------"
 246         @echo ">>> Rebuilding the temporary build tree"
 247         @echo "--------------------------------------------------------------"
 248 .if !defined(NOCLEAN)
 249         rm -rf ${WORLDTMP}
 250 .endif
 251 .for _dir in ${USRDIRS}
 252         mkdir -p ${WORLDTMP}/${_dir}
 253 .endfor
 254 .for _dir in ${INCDIRS}
 255         mkdir -p ${WORLDTMP}/usr/include/${_dir}
 256 .endfor
 257         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 258         @echo
 259         @echo "--------------------------------------------------------------"
 260         @echo ">>> stage 1: bootstrap tools"
 261         @echo "--------------------------------------------------------------"
 262         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 263 .if !defined(NOCLEAN)
 264         @echo
 265         @echo "--------------------------------------------------------------"
 266         @echo ">>> stage 2: cleaning up the object tree"
 267         @echo "--------------------------------------------------------------"
 268         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 269 .endif
 270         @echo
 271         @echo "--------------------------------------------------------------"
 272         @echo ">>> stage 2: rebuilding the object tree"
 273         @echo "--------------------------------------------------------------"
 274         cd ${.CURDIR}; ${WMAKE} par-obj
 275         @echo
 276         @echo "--------------------------------------------------------------"
 277         @echo ">>> stage 2: build tools"
 278         @echo "--------------------------------------------------------------"
 279         cd ${.CURDIR}; ${TMAKE} build-tools
 280         @echo
 281         @echo "--------------------------------------------------------------"
 282         @echo ">>> stage 3: cross tools"
 283         @echo "--------------------------------------------------------------"
 284         cd ${.CURDIR}; ${XMAKE} cross-tools
 285         @echo
 286         @echo "--------------------------------------------------------------"
 287         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 288         @echo "--------------------------------------------------------------"
 289         cd ${.CURDIR}; ${WMAKE} SHARED=copies includes
 290         @echo
 291         @echo "--------------------------------------------------------------"
 292         @echo ">>> stage 4: building libraries"
 293         @echo "--------------------------------------------------------------"
 294         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 295         @echo
 296         @echo "--------------------------------------------------------------"
 297         @echo ">>> stage 4: make dependencies"
 298         @echo "--------------------------------------------------------------"
 299         cd ${.CURDIR}; ${WMAKE} par-depend
 300         @echo
 301         @echo "--------------------------------------------------------------"
 302         @echo ">>> stage 4: building everything.."
 303         @echo "--------------------------------------------------------------"
 304         cd ${.CURDIR}; ${WMAKE} all
 305
 306 everything:
 307         @echo "--------------------------------------------------------------"
 308         @echo ">>> Building everything.."
 309         @echo "--------------------------------------------------------------"
 310         cd ${.CURDIR}; ${WMAKE} all
 311
 312 #
 313 # installworld
 314 #
 315 # Installs everything compiled by a 'buildworld'.
 316 #
 317 installworld:
 318         mkdir -p ${INSTALLTMP}
 319         for prog in [ awk cat chflags chmod chown date echo egrep find grep \
 320             ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
 321             test true uname wc zic; do \
 322                 cp `which $$prog` ${INSTALLTMP}; \
 323         done
 324         cd ${.CURDIR}; ${IMAKE} reinstall
 325         rm -rf ${INSTALLTMP}
 326
 327 #
 328 # reinstall
 329 #
 330 # If you have a build server, you can NFS mount the source and obj directories
 331 # and do a 'make reinstall' on the *client* to install new binaries from the
 332 # most recent server build.
 333 #
 334 reinstall:
 335         @echo "--------------------------------------------------------------"
 336         @echo ">>> Making hierarchy"
 337         @echo "--------------------------------------------------------------"
 338         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 339         @echo
 340         @echo "--------------------------------------------------------------"
 341         @echo ">>> Installing everything.."
 342         @echo "--------------------------------------------------------------"
 343         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 344 .if !defined(NOMAN)
 345         @echo
 346         @echo "--------------------------------------------------------------"
 347         @echo ">>> Rebuilding man page indices"
 348         @echo "--------------------------------------------------------------"
 349         cd ${.CURDIR}/share/man; ${MAKE} makedb
 350 .endif
 351
 352 #
 353 # distribworld
 354 #
 355 # Front-end to distribute to make sure the search path contains
 356 # the object directory. Needed for miniperl.
 357 #
 358 distribworld:
 359         cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
 360
 361 #
 362 # buildkernel and installkernel
 363 #
 364 # Which kernels to build and/or install is specified by setting
 365 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 366 # Only the existing (depending TARGET) config files are used
 367 # for building kernels and only the first of these is designated
 368 # as the one being installed.
 369 #
 370 # Note that we have to use TARGET instead of TARGET_ARCH when
 371 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 372 # be set to cross-build, we have to make sure TARGET is set
 373 # properly.
 374
 375 .if !defined(KERNCONF) && defined(KERNEL)
 376 KERNCONF=       ${KERNEL}
 377 KERNWARN=       yes
 378 .else
 379 KERNCONF?=      GENERIC
 380 .endif
 381 INSTKERNNAME?=  kernel
 382
 383 # The only exotic TARGET_ARCH/TARGET combination valid at this
 384 # time is i386/pc98. In all other cases set TARGET equal to
 385 # TARGET_ARCH.
 386 .if ${TARGET_ARCH} != "i386" || ${TARGET} != "pc98"
 387 TARGET=         ${TARGET_ARCH}
 388 .endif
 389
 390 KRNLSRCDIR=     ${.CURDIR}/sys
 391 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 392 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 393 KERNCONFDIR?=   ${KRNLCONFDIR}
 394
 395 BUILDKERNELS=
 396 INSTALLKERNEL=
 397 .for _kernel in ${KERNCONF}
 398 .if exists(${KERNCONFDIR}/${_kernel})
 399 BUILDKERNELS+=  ${_kernel}
 400 .if empty(INSTALLKERNEL)
 401 INSTALLKERNEL= ${_kernel}
 402 .endif
 403 .endif
 404 .endfor
 405
 406 #
 407 # buildkernel
 408 #
 409 # Builds all kernels defined by BUILDKERNELS.
 410 #
 411 buildkernel:
 412 .if empty(BUILDKERNELS)
 413         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 414         @false
 415 .endif
 416 .if defined(KERNWARN)
 417         @echo "--------------------------------------------------------------"
 418         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 419         @echo "--------------------------------------------------------------"
 420         @sleep 3
 421 .endif
 422         @echo
 423 .for _kernel in ${BUILDKERNELS}
 424         @echo "--------------------------------------------------------------"
 425         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 426         @echo "--------------------------------------------------------------"
 427         @echo "===> ${_kernel}"
 428         mkdir -p ${KRNLOBJDIR}
 429 .if !defined(NO_KERNELCONFIG)
 430         cd ${KRNLCONFDIR}; \
 431                 PATH=${TMPPATH} \
 432                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 433                         ${KERNCONFDIR}/${_kernel}
 434 .endif
 435 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 436 .if defined(MODULES_WITH_WORLD) || defined(NO_MODULES) || !exists(${KRNLSRCDIR}/modules)
 437         cd ${KRNLOBJDIR}/${_kernel}; \
 438             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean
 439 .else
 440         cd ${KRNLOBJDIR}/${_kernel}; \
 441             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean cleandir
 442 .endif
 443 .endif
 444         cd ${KRNLOBJDIR}/${_kernel}; \
 445                 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
 446                     ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
 447 .if !defined(NO_KERNELDEPEND)
 448         cd ${KRNLOBJDIR}/${_kernel}; \
 449             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 450 .endif
 451         cd ${KRNLOBJDIR}/${_kernel}; \
 452             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 453         @echo "--------------------------------------------------------------"
 454         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 455         @echo "--------------------------------------------------------------"
 456 .endfor
 457
 458 #
 459 # installkernel
 460 #
 461 # Install the kernel defined by INSTALLKERNEL
 462 #
 463 installkernel:
 464         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 465             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
 466 reinstallkernel:
 467         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 468             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
 469
 470 #
 471 # kernel
 472 #
 473 # Short hand for `make buildkernel installkernel'
 474 #
 475 kernel: buildkernel installkernel
 476
 477 #
 478 # update
 479 #
 480 # Update the source tree, by running sup and/or running cvs to update to the
 481 # latest copy.
 482 #
 483 update:
 484 .if defined(SUP_UPDATE)
 485         @echo "--------------------------------------------------------------"
 486         @echo ">>> Running ${SUP}"
 487         @echo "--------------------------------------------------------------"
 488 .if defined(SUPFILE)
 489         @${SUP} ${SUPFLAGS} ${SUPFILE}
 490 .endif
 491 .if defined(SUPFILE1)
 492         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 493 .endif
 494 .if defined(SUPFILE2)
 495         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 496 .endif
 497 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 498         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 499 .endif
 500 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 501         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 502 .endif
 503 .endif
 504 .if defined(CVS_UPDATE)
 505         @echo "--------------------------------------------------------------"
 506         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 507         @echo "--------------------------------------------------------------"
 508         cd ${.CURDIR}; ${CVS} -q update -A -P -d
 509 .endif
 510
 511 #
 512 # most
 513 #
 514 # Build most of the user binaries on the existing system libs and includes.
 515 #
 516 most:
 517         @echo "--------------------------------------------------------------"
 518         @echo ">>> Building programs only"
 519         @echo "--------------------------------------------------------------"
 520         cd ${.CURDIR}/bin;              ${MAKE} all
 521         cd ${.CURDIR}/sbin;             ${MAKE} all
 522         cd ${.CURDIR}/libexec;          ${MAKE} all
 523         cd ${.CURDIR}/usr.bin;          ${MAKE} all
 524         cd ${.CURDIR}/usr.sbin;         ${MAKE} all
 525         cd ${.CURDIR}/gnu/libexec;      ${MAKE} all
 526         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} all
 527         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} all
 528
 529 #
 530 # installmost
 531 #
 532 # Install the binaries built by the 'most' target.  This does not include
 533 # libraries or include files.
 534 #
 535 installmost:
 536         @echo "--------------------------------------------------------------"
 537         @echo ">>> Installing programs only"
 538         @echo "--------------------------------------------------------------"
 539         cd ${.CURDIR}/bin;              ${MAKE} install
 540         cd ${.CURDIR}/sbin;             ${MAKE} install
 541         cd ${.CURDIR}/libexec;          ${MAKE} install
 542         cd ${.CURDIR}/usr.bin;          ${MAKE} install
 543         cd ${.CURDIR}/usr.sbin;         ${MAKE} install
 544         cd ${.CURDIR}/gnu/libexec;      ${MAKE} install
 545         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} install
 546         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} install
 547
 548 #
 549 # ------------------------------------------------------------------------
 550 #
 551 # From here onwards are utility targets used by the 'make world' and
 552 # related targets.  If your 'world' breaks, you may like to try to fix
 553 # the problem and manually run the following targets to attempt to
 554 # complete the build.  Beware, this is *not* guaranteed to work, you
 555 # need to have a pretty good grip on the current state of the system
 556 # to attempt to manually finish it.  If in doubt, 'make world' again.
 557 #
 558
 559 #
 560 # bootstrap-tools: Build tools needed for compatibility
 561 #
 562 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 563 _strfile=       games/fortune/strfile
 564 .endif
 565
 566 bootstrap-tools:
 567 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
 568     usr.sbin/config usr.sbin/kbdcontrol \
 569     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
 570         cd ${.CURDIR}/${_tool}; \
 571                 ${MAKE} obj; \
 572                 ${MAKE} depend; \
 573                 ${MAKE} all; \
 574                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 575 .endfor
 576
 577 #
 578 # build-tools: Build special purpose build tools
 579 #
 580 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 581 _games= games/adventure games/hack games/phantasia
 582 .endif
 583
 584 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 585 _share= share/syscons/scrnmaps
 586 .endif
 587
 588 .if !defined(NO_FORTRAN)
 589 _fortran= gnu/usr.bin/cc/f771
 590 .endif
 591
 592 .if !defined(NOPERL)
 593 _perl=  gnu/usr.bin/perl/miniperl
 594 .endif
 595
 596 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
 597     !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 598 _libroken4= kerberosIV/lib/libroken
 599 .endif
 600
 601 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 602     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 603 _libkrb5= kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 604 .endif
 605
 606 build-tools:
 607 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
 608     ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
 609     usr.bin/file usr.sbin/sysinstall
 610         cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
 611 .endfor
 612
 613 #
 614 # cross-tools: Build cross-building tools
 615 #
 616 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 617 _elf2exe=       usr.sbin/elf2exe
 618 .endif
 619
 620 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 621 _btxld= usr.sbin/btxld
 622 .endif
 623
 624 cross-tools:
 625 .for _tool in ${_btxld} ${_elf2exe} \
 626     gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
 627         cd ${.CURDIR}/${_tool}; \
 628                 ${MAKE} obj; \
 629                 ${MAKE} depend; \
 630                 ${MAKE} all; \
 631                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 632 .endfor
 633
 634 #
 635 # hierarchy - ensure that all the needed directories are present
 636 #
 637 hierarchy:
 638         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 639
 640 #
 641 # includes - possibly generate and install the include files.
 642 #
 643 includes:
 644         cd ${.CURDIR}/include;                  ${MAKE} -B all install
 645         cd ${.CURDIR}/gnu/include;              ${MAKE} install
 646         cd ${.CURDIR}/gnu/lib/libobjc;          ${MAKE} beforeinstall
 647         cd ${.CURDIR}/gnu/lib/libreadline/readline;     ${MAKE} beforeinstall
 648         cd ${.CURDIR}/gnu/lib/libregex;         ${MAKE} beforeinstall
 649         cd ${.CURDIR}/gnu/lib/libstdc++;        ${MAKE} beforeinstall
 650         cd ${.CURDIR}/gnu/lib/libdialog;        ${MAKE} beforeinstall
 651         cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus;   ${MAKE} beforeinstall
 652 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 653 .if exists(${.CURDIR}/secure/lib/libcrypto)
 654         cd ${.CURDIR}/secure/lib/libcrypto;     ${MAKE} beforeinstall
 655 .endif
 656 .if exists(${.CURDIR}/secure/lib/libssl)
 657         cd ${.CURDIR}/secure/lib/libssl;        ${MAKE} beforeinstall
 658 .endif
 659 .endif
 660 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
 661     defined(MAKE_KERBEROS4)
 662         cd ${.CURDIR}/kerberosIV/lib/libacl;    ${MAKE} beforeinstall
 663         cd ${.CURDIR}/kerberosIV/lib/libkadm;   ${MAKE} beforeinstall
 664         cd ${.CURDIR}/kerberosIV/lib/libkafs;   ${MAKE} beforeinstall
 665         cd ${.CURDIR}/kerberosIV/lib/libkdb;    ${MAKE} beforeinstall
 666         cd ${.CURDIR}/kerberosIV/lib/libkrb;    ${MAKE} beforeinstall
 667         cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
 668 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 669         cd ${.CURDIR}/secure/lib/libtelnet;     ${MAKE} beforeinstall
 670 .else
 671         cd ${.CURDIR}/lib/libtelnet;            ${MAKE} beforeinstall
 672 .endif
 673 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
 674     defined(MAKE_KERBEROS5)
 675         cd ${.CURDIR}/kerberos5/lib/libasn1;            ${MAKE} beforeinstall
 676         cd ${.CURDIR}/kerberos5/lib/libhdb;             ${MAKE} beforeinstall
 677         cd ${.CURDIR}/kerberos5/lib/libkadm5clnt;       ${MAKE} beforeinstall
 678         cd ${.CURDIR}/kerberos5/lib/libkadm5srv;        ${MAKE} beforeinstall
 679         cd ${.CURDIR}/kerberos5/lib/libkafs5;           ${MAKE} beforeinstall
 680         cd ${.CURDIR}/kerberos5/lib/libkrb5;            ${MAKE} beforeinstall
 681         cd ${.CURDIR}/kerberos5/lib/libsl;              ${MAKE} beforeinstall
 682 .endif
 683 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
 684         cd ${.CURDIR}/lib/csu/${MACHINE_ARCH};  ${MAKE} beforeinstall
 685 .endif
 686         cd ${.CURDIR}/gnu/lib/csu;              ${MAKE} beforeinstall
 687         cd ${.CURDIR}/lib/libalias;             ${MAKE} beforeinstall
 688         cd ${.CURDIR}/lib/libatm;               ${MAKE} beforeinstall
 689         cd ${.CURDIR}/lib/libdevstat;           ${MAKE} beforeinstall
 690         cd ${.CURDIR}/lib/libc;                 ${MAKE} beforeinstall
 691         cd ${.CURDIR}/lib/libcalendar;          ${MAKE} beforeinstall
 692         cd ${.CURDIR}/lib/libcam;               ${MAKE} beforeinstall
 693         cd ${.CURDIR}/lib/libdisk;              ${MAKE} beforeinstall
 694         cd ${.CURDIR}/lib/libedit;              ${MAKE} beforeinstall
 695         cd ${.CURDIR}/lib/libfetch;             ${MAKE} beforeinstall
 696         cd ${.CURDIR}/lib/libftpio;             ${MAKE} beforeinstall
 697         cd ${.CURDIR}/lib/libkvm;               ${MAKE} beforeinstall
 698         cd ${.CURDIR}/lib/libmd;                ${MAKE} beforeinstall
 699         cd ${.CURDIR}/lib/libmp;                ${MAKE} beforeinstall
 700         cd ${.CURDIR}/lib/msun;                 ${MAKE} beforeinstall
 701         cd ${.CURDIR}/lib/libncp;               ${MAKE} beforeinstall
 702         cd ${.CURDIR}/lib/libncurses;           ${MAKE} beforeinstall
 703         cd ${.CURDIR}/lib/libnetgraph;          ${MAKE} beforeinstall
 704         cd ${.CURDIR}/lib/libopie;              ${MAKE} beforeinstall
 705         cd ${.CURDIR}/lib/libpcap;              ${MAKE} beforeinstall
 706         cd ${.CURDIR}/lib/libradius;            ${MAKE} beforeinstall
 707         cd ${.CURDIR}/lib/librpcsvc;            ${MAKE} beforeinstall
 708         cd ${.CURDIR}/lib/libpam/libpam;        ${MAKE} beforeinstall
 709         cd ${.CURDIR}/lib/libsbuf;              ${MAKE} beforeinstall
 710         cd ${.CURDIR}/lib/libstand;             ${MAKE} beforeinstall
 711         cd ${.CURDIR}/lib/libtacplus;           ${MAKE} beforeinstall
 712         cd ${.CURDIR}/lib/libcom_err;           ${MAKE} beforeinstall
 713         cd ${.CURDIR}/lib/libutil;              ${MAKE} beforeinstall
 714         cd ${.CURDIR}/lib/libvgl;               ${MAKE} beforeinstall
 715         cd ${.CURDIR}/lib/libwrap;              ${MAKE} beforeinstall
 716         cd ${.CURDIR}/lib/libz;                 ${MAKE} beforeinstall
 717         cd ${.CURDIR}/usr.bin/lex;              ${MAKE} beforeinstall
 718
 719 #
 720 # libraries - build all libraries, and install them under ${DESTDIR}.
 721 #
 722 # The following dependencies exist between the libraries:
 723 #
 724 # lib*: csu libgcc_pic
 725 # libatm: libmd
 726 # libcam: libsbuf
 727 # libcrypt: libmd
 728 # libdevstat: libkvm
 729 # libdialog: libncurses
 730 # libedit: libncurses
 731 # libg++: msun
 732 # libkrb: libcrypt
 733 # libopie: libmd
 734 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
 735 #         librpcsvc libtacplus libutil libz libssh
 736 # libradius: libmd
 737 # libreadline: libncurses
 738 # libstc++: msun
 739 # libtacplus: libmd
 740 #
 741 # Across directories this comes down to (rougly):
 742 #
 743 # gnu/lib: lib/msun lib/libncurses
 744 # kerberosIV/lib kerberos5/lib: lib/libcrypt
 745 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
 746 #             secure/lib/libssh lib/libz
 747 # secure/lib: lib/libmd
 748 #
 749 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
 750 _csu=   lib/csu/${MACHINE_ARCH}.pcc
 751 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
 752 _csu=   lib/csu/i386-elf
 753 .else
 754 _csu=   lib/csu/${MACHINE_ARCH}
 755 .endif
 756
 757 .if !defined(NOSECURE) && !defined(NOCRYPT)
 758 _secure_lib=    secure/lib
 759 .endif
 760
 761 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 762 _kerberosIV_lib=        kerberosIV/lib
 763 .endif
 764
 765 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 766 _kerberos5_lib= kerberos5/lib
 767 .endif
 768
 769 .if ${MACHINE_ARCH} == "i386"
 770 _libkeycap=     usr.sbin/pcvt/keycap
 771 .endif
 772
 773 .if !defined(NOPERL)
 774 _libperl=       gnu/usr.bin/perl/libperl
 775 .endif
 776
 777 libraries:
 778 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
 779     ${_secure_lib} ${_kerberosIV_lib} \
 780     ${_kerberos5_lib} lib/libcom_err lib/libkvm lib/msun lib/libncurses \
 781     lib/libopie lib/libradius lib/librpcsvc lib/libsbuf lib/libtacplus \
 782     lib/libutil lib/libz lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
 783 .if exists(${.CURDIR}/${_lib})
 784         cd ${.CURDIR}/${_lib}; \
 785                 ${MAKE} depend; \
 786                 ${MAKE} all; \
 787                 ${MAKE} install
 788 .endif
 789 .endfor
 790
 791 .for __target in clean cleandepend cleandir depend obj
 792 .for entry in ${SUBDIR}
 793 ${entry}.${__target}__D: .PHONY
 794         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 795                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 796                 edir=${entry}.${MACHINE_ARCH}; \
 797                 cd ${.CURDIR}/$${edir}; \
 798         else \
 799                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 800                 edir=${entry}; \
 801                 cd ${.CURDIR}/$${edir}; \
 802         fi; \
 803         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 804 .endfor
 805 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 806 .endfor
 807
 808 .include <bsd.subdir.mk>