Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DNO_KERBEROS Do not build Heimdal (Kerberos 5)
   6 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   7 #       -DNOCLEAN do not clean at all
   8 #       -DNOCRYPT will prevent building of crypt versions
   9 #       -DNOMAN do not build the manual pages
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNOGAMES do not go into games subdir
  12 #       -DNOSHARE do not go into share subdir
  13 #       -DNOINFO do not make or install info files
  14 #       -DNOLIBC_R do not build libc_r.
  15 #       -DNO_FORTRAN do not build g77 and related libraries.
  16 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  17 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  18 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  19 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  20 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  21 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  22 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  23
  24 #
  25 # The intended user-driven targets are:
  26 # buildworld  - rebuild *everything*, including glue to help do upgrades
  27 # installworld- install everything built by "buildworld"
  28 # update      - convenient way to update your source tree (eg: sup/cvs)
  29 # most        - build user commands, no libraries or include files
  30 # installmost - install user commands, no libraries or include files
  31 #
  32 # Standard targets (not defined here) are documented in the makefiles in
  33 # /usr/share/mk.  These include:
  34 #               obj depend all install clean cleandepend cleanobj
  35
  36 # Put initial settings here.
  37 SUBDIR=
  38
  39 # We must do share/info early so that installation of info `dir'
  40 # entries works correctly.  Do it first since it is less likely to
  41 # grow dependencies on include and lib than vice versa.
  42 .if exists(${.CURDIR}/share/info)
  43 SUBDIR+= share/info
  44 .endif
  45
  46 .if exists(${.CURDIR}/include)
  47 SUBDIR+= include
  48 .endif
  49 .if exists(${.CURDIR}/lib)
  50 SUBDIR+= lib
  51 .endif
  52
  53 .if exists(${.CURDIR}/bin)
  54 SUBDIR+= bin
  55 .endif
  56 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  57 SUBDIR+= games
  58 .endif
  59 .if exists(${.CURDIR}/gnu)
  60 SUBDIR+= gnu
  61 .endif
  62 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  63     !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
  64 SUBDIR+= kerberos5
  65 .endif
  66 .if exists(${.CURDIR}/libexec)
  67 SUBDIR+= libexec
  68 .endif
  69 .if exists(${.CURDIR}/sbin)
  70 SUBDIR+= sbin
  71 .endif
  72 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
  73 SUBDIR+= secure
  74 .endif
  75 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  76 SUBDIR+= share
  77 .endif
  78 .if exists(${.CURDIR}/sys)
  79 SUBDIR+= sys
  80 .endif
  81 .if exists(${.CURDIR}/usr.bin)
  82 SUBDIR+= usr.bin
  83 .endif
  84 .if exists(${.CURDIR}/usr.sbin)
  85 SUBDIR+= usr.sbin
  86 .endif
  87
  88 # etc must be last for "distribute" to work
  89 .if exists(${.CURDIR}/etc)
  90 SUBDIR+= etc
  91 .endif
  92
  93 # These are last, since it is nice to at least get the base system
  94 # rebuilt before you do them.
  95 .if defined(LOCAL_DIRS)
  96 .for _DIR in ${LOCAL_DIRS}
  97 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  98 SUBDIR+= ${_DIR}
  99 .endif
 100 .endfor
 101 .endif
 102
 103 .if defined(SUBDIR_OVERRIDE)
 104 SUBDIR=         ${SUBDIR_OVERRIDE}
 105 .endif
 106
 107 .if defined(NOCLEANDIR)
 108 CLEANDIR=       clean cleandepend
 109 .else
 110 CLEANDIR=       cleandir
 111 .endif
 112
 113 CVS?=           cvs
 114 SUP?=           /usr/local/bin/cvsup
 115 SUPFLAGS?=      -g -L 2 -P -
 116 .if defined(SUPHOST)
 117 SUPFLAGS+=      -h ${SUPHOST}
 118 .endif
 119
 120 MAKEOBJDIRPREFIX?=      /usr/obj
 121 .if !defined(OSRELDATE)
 122 OSRELDATE!=     awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
 123                 /usr/include/osreldate.h
 124 .endif
 125 TARGET_ARCH?=   ${MACHINE_ARCH}
 126 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 127 TARGET?=        ${MACHINE}
 128 TARGET_CPUTYPE?=${CPUTYPE}
 129 .else
 130 TARGET?=        ${TARGET_ARCH}
 131 TARGET_CPUTYPE?=
 132 .endif
 133 .if !empty(TARGET_CPUTYPE)
 134 _TARGET_CPUTYPE=${TARGET_CPUTYPE}
 135 .else
 136 _TARGET_CPUTYPE=dummy
 137 .endif
 138 _CPUTYPE!=      ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \
 139                 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE
 140 .if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
 141 .error CPUTYPE global should be set with ?=.
 142 .endif
 143 .if make(buildworld)
 144 BUILD_ARCH!=    sysctl -n hw.machine_arch
 145 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 146 .error To cross-build, set TARGET_ARCH.
 147 .endif
 148 .endif
 149 .if ${MACHINE} == ${TARGET}
 150 OBJTREE=        ${MAKEOBJDIRPREFIX}
 151 .else
 152 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET}
 153 .endif
 154 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 155 # /usr/games added for fortune which depend on strfile
 156 BPATH=          ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
 157 XPATH=          ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 158 STRICTTMPPATH=  ${BPATH}:${XPATH}
 159 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 160
 161 INSTALLTMP!=    /usr/bin/mktemp -d -u -t install
 162
 163 #
 164 # Building a world goes through the following stages
 165 #
 166 # 1. legacy stage [BMAKE]
 167 #       This stage is responsible for creating compatibility
 168 #       shims that are needed by the bootstrap-tools,
 169 #       build-tools and cross-tools stages.
 170 # 1. bootstrap-tools stage [BMAKE]
 171 #       This stage is responsible for creating programs that
 172 #       are needed for backward compatibility reasons. They
 173 #       are not built as cross-tools.
 174 # 2. build-tools stage [TMAKE]
 175 #       This stage is responsible for creating the object
 176 #       tree and building any tools that are needed during
 177 #       the build process.
 178 # 3. cross-tools stage [XMAKE]
 179 #       This stage is responsible for creating any tools that
 180 #       are needed for cross-builds. A cross-compiler is one
 181 #       of them.
 182 # 4. world stage [WMAKE]
 183 #       This stage actually builds the world.
 184 # 5. install stage (optional) [IMAKE]
 185 #       This stage installs a previously built world.
 186 #
 187
 188 BOOTSTRAPPING?= 0
 189
 190 # Common environment for world related stages
 191 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 192                 MACHINE_ARCH=${TARGET_ARCH} \
 193                 MACHINE=${TARGET} \
 194                 CPUTYPE=${TARGET_CPUTYPE} \
 195                 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
 196                 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
 197                 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
 198
 199 # bootstrap-tools stage
 200 BMAKEENV=       DESTDIR= \
 201                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 202                 PATH=${BPATH}:${PATH} \
 203                 WORLDTMP=${WORLDTMP} \
 204                 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
 205 BMAKE=          MAKEOBJDIRPREFIX=${WORLDTMP} \
 206                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 207                 BOOTSTRAPPING=${OSRELDATE} \
 208                 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \
 209                 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS
 210
 211 # build-tools stage
 212 TMAKE=          MAKEOBJDIRPREFIX=${OBJTREE} \
 213                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 214                 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS
 215
 216 # cross-tools stage
 217 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 218
 219 # world stage
 220 WMAKEENV=       ${CROSSENV} \
 221                 DESTDIR=${WORLDTMP} \
 222                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 223                 PATH=${TMPPATH}
 224 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 225
 226 # install stage
 227 IMAKEENV=       ${CROSSENV} \
 228                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 229 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 230
 231 # kernel stage
 232 KMAKEENV=       ${WMAKEENV}
 233
 234 #
 235 # buildworld
 236 #
 237 # Attempt to rebuild the entire system, with reasonable chance of
 238 # success, regardless of how old your existing system is.
 239 #
 240 _worldtmp:
 241 .if ${.CURDIR:C/[^,]//g} != ""
 242 #       The m4 build of sendmail files doesn't like it if ',' is used
 243 #       anywhere in the path of it's files.
 244         @echo
 245         @echo "*** Error: path to source tree contains a comma ','"
 246         @echo
 247         @false
 248 .endif
 249         @echo
 250         @echo "--------------------------------------------------------------"
 251         @echo ">>> Rebuilding the temporary build tree"
 252         @echo "--------------------------------------------------------------"
 253 .if !defined(NOCLEAN)
 254         rm -rf ${WORLDTMP}
 255 .else
 256         rm -rf ${WORLDTMP}/legacy/usr/include
 257         # XXX - These two can depend on any header file.
 258         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 259         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 260 .endif
 261 .for _dir in \
 262     usr/bin usr/games usr/include/sys usr/lib \
 263     usr/libexec usr/sbin usr/share/dict \
 264     usr/share/groff_font/devX100 \
 265     usr/share/groff_font/devX100-12 \
 266     usr/share/groff_font/devX75 \
 267     usr/share/groff_font/devX75-12 \
 268     usr/share/groff_font/devascii \
 269     usr/share/groff_font/devcp1047 \
 270     usr/share/groff_font/devdvi \
 271     usr/share/groff_font/devhtml \
 272     usr/share/groff_font/devkoi8-r \
 273     usr/share/groff_font/devlatin1 \
 274     usr/share/groff_font/devlbp \
 275     usr/share/groff_font/devlj4 \
 276     usr/share/groff_font/devps \
 277     usr/share/groff_font/devutf8 \
 278     usr/share/tmac/mdoc usr/share/tmac/mm
 279         mkdir -p ${WORLDTMP}/legacy/${_dir}
 280 .endfor
 281 .for _dir in \
 282     usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \
 283     usr/libexec usr/share/misc
 284         mkdir -p ${WORLDTMP}/${_dir}
 285 .endfor
 286         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
 287             -p ${WORLDTMP}/usr/include
 288         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 289 _legacy:
 290         @echo
 291         @echo "--------------------------------------------------------------"
 292         @echo ">>> stage 1: legacy release compatibility shims"
 293         @echo "--------------------------------------------------------------"
 294         cd ${.CURDIR}; ${BMAKE} legacy
 295 _bootstrap-tools:
 296         @echo
 297         @echo "--------------------------------------------------------------"
 298         @echo ">>> stage 1: bootstrap tools"
 299         @echo "--------------------------------------------------------------"
 300         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 301 _cleanobj:
 302 .if !defined(NOCLEAN)
 303         @echo
 304         @echo "--------------------------------------------------------------"
 305         @echo ">>> stage 2: cleaning up the object tree"
 306         @echo "--------------------------------------------------------------"
 307         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 308 .endif
 309 _obj:
 310         @echo
 311         @echo "--------------------------------------------------------------"
 312         @echo ">>> stage 2: rebuilding the object tree"
 313         @echo "--------------------------------------------------------------"
 314         cd ${.CURDIR}; ${WMAKE} par-obj
 315 _build-tools:
 316         @echo
 317         @echo "--------------------------------------------------------------"
 318         @echo ">>> stage 2: build tools"
 319         @echo "--------------------------------------------------------------"
 320         cd ${.CURDIR}; ${TMAKE} build-tools
 321 _cross-tools:
 322         @echo
 323         @echo "--------------------------------------------------------------"
 324         @echo ">>> stage 3: cross tools"
 325         @echo "--------------------------------------------------------------"
 326         cd ${.CURDIR}; ${XMAKE} cross-tools
 327 _includes:
 328         @echo
 329         @echo "--------------------------------------------------------------"
 330         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 331         @echo "--------------------------------------------------------------"
 332         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 333 _libraries:
 334         @echo
 335         @echo "--------------------------------------------------------------"
 336         @echo ">>> stage 4: building libraries"
 337         @echo "--------------------------------------------------------------"
 338         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 339 _depend:
 340         @echo
 341         @echo "--------------------------------------------------------------"
 342         @echo ">>> stage 4: make dependencies"
 343         @echo "--------------------------------------------------------------"
 344         cd ${.CURDIR}; ${WMAKE} par-depend
 345 everything:
 346         @echo
 347         @echo "--------------------------------------------------------------"
 348         @echo ">>> stage 4: building everything.."
 349         @echo "--------------------------------------------------------------"
 350         cd ${.CURDIR}; ${WMAKE} par-all
 351
 352
 353 WMAKE_TGTS=
 354 .if !defined(SUBDIR_OVERRIDE)
 355 WMAKE_TGTS+=    _worldtmp _legacy _bootstrap-tools
 356 .endif
 357 WMAKE_TGTS+=    _cleanobj _obj _build-tools
 358 .if !defined(SUBDIR_OVERRIDE)
 359 WMAKE_TGTS+=    _cross-tools
 360 .endif
 361 WMAKE_TGTS+=    _includes _libraries _depend everything
 362
 363 buildworld: ${WMAKE_TGTS}
 364 .ORDER: ${WMAKE_TGTS}
 365
 366 #
 367 # installcheck
 368 #
 369 # Checks to be sure system is ready for installworld
 370 #
 371 installcheck:
 372 .if !defined(NO_SENDMAIL)
 373         @if ! `grep -q '^smmsp:' /etc/passwd`; then \
 374                 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
 375                 false; \
 376         fi
 377         @if ! `grep -q '^smmsp:' /etc/group`; then \
 378                 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
 379                 false; \
 380         fi
 381 .endif
 382 .if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \
 383     (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/")
 384         @echo "Checking to see if your booted kernel is fresh enough.."
 385         ${.OBJDIR}/bin/sh/sh -c \
 386             'echo "Testing installed kernel for new sigaction(2) syscall"'
 387         @echo "Seems ok.."
 388 .endif
 389
 390 #
 391 # distributeworld
 392 #
 393 # Distributes everything compiled by a `buildworld'.
 394 #
 395 # installworld
 396 #
 397 # Installs everything compiled by a 'buildworld'.
 398 #
 399 distributeworld installworld: installcheck
 400         mkdir -p ${INSTALLTMP}
 401         for prog in [ awk cap_mkdb cat chflags chmod chown \
 402             date echo egrep find grep \
 403             ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
 404             test true uname wc zic; do \
 405                 cp `which $$prog` ${INSTALLTMP}; \
 406         done
 407         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 408         rm -rf ${INSTALLTMP}
 409
 410 #
 411 # reinstall
 412 #
 413 # If you have a build server, you can NFS mount the source and obj directories
 414 # and do a 'make reinstall' on the *client* to install new binaries from the
 415 # most recent server build.
 416 #
 417 reinstall:
 418         @echo "--------------------------------------------------------------"
 419         @echo ">>> Making hierarchy"
 420         @echo "--------------------------------------------------------------"
 421         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 422         @echo
 423         @echo "--------------------------------------------------------------"
 424         @echo ">>> Installing everything.."
 425         @echo "--------------------------------------------------------------"
 426         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 427 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 428         @echo
 429         @echo "--------------------------------------------------------------"
 430         @echo ">>> Rebuilding man page indices"
 431         @echo "--------------------------------------------------------------"
 432         cd ${.CURDIR}/share/man; ${MAKE} makedb
 433 .endif
 434
 435 redistribute:
 436         @echo "--------------------------------------------------------------"
 437         @echo ">>> Distributing everything.."
 438         @echo "--------------------------------------------------------------"
 439         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 440
 441 #
 442 # buildkernel and installkernel
 443 #
 444 # Which kernels to build and/or install is specified by setting
 445 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 446 # Only the existing (depending TARGET) config files are used
 447 # for building kernels and only the first of these is designated
 448 # as the one being installed.
 449 #
 450 # Note that we have to use TARGET instead of TARGET_ARCH when
 451 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 452 # be set to cross-build, we have to make sure TARGET is set
 453 # properly.
 454
 455 .if !defined(KERNCONF) && defined(KERNEL)
 456 KERNCONF=       ${KERNEL}
 457 KERNWARN=       yes
 458 .else
 459 KERNCONF?=      GENERIC
 460 .endif
 461 INSTKERNNAME?=  kernel
 462
 463 KERNSRCDIR?=    ${.CURDIR}/sys
 464 KRNLCONFDIR=    ${KERNSRCDIR}/${TARGET}/conf
 465 KRNLOBJDIR=     ${OBJTREE}${KERNSRCDIR}
 466 KERNCONFDIR?=   ${KRNLCONFDIR}
 467
 468 BUILDKERNELS=
 469 INSTALLKERNEL=
 470 .for _kernel in ${KERNCONF}
 471 .if exists(${KERNCONFDIR}/${_kernel})
 472 BUILDKERNELS+=  ${_kernel}
 473 .if empty(INSTALLKERNEL)
 474 INSTALLKERNEL= ${_kernel}
 475 .endif
 476 .endif
 477 .endfor
 478
 479 #
 480 # buildkernel
 481 #
 482 # Builds all kernels defined by BUILDKERNELS.
 483 #
 484 buildkernel:
 485 .if empty(BUILDKERNELS)
 486         @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF}).";
 487         @false
 488 .endif
 489 .if defined(KERNWARN)
 490         @echo "--------------------------------------------------------------"
 491         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 492         @echo "--------------------------------------------------------------"
 493         @sleep 3
 494 .endif
 495         @echo
 496 .for _kernel in ${BUILDKERNELS}
 497         @echo "--------------------------------------------------------------"
 498         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 499         @echo "--------------------------------------------------------------"
 500         @echo "===> ${_kernel}"
 501         mkdir -p ${KRNLOBJDIR}
 502 .if !defined(NO_KERNELCONFIG)
 503         cd ${KRNLCONFDIR}; \
 504                 PATH=${TMPPATH} \
 505                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 506                         ${KERNCONFDIR}/${_kernel}
 507 .endif
 508 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 509         cd ${KRNLOBJDIR}/${_kernel}; \
 510             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR}
 511 .endif
 512         cd ${KRNLOBJDIR}/${_kernel}; \
 513             MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
 514             ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
 515         cd ${KRNLOBJDIR}/${_kernel}; \
 516             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj
 517 # XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
 518 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
 519 .for target in obj depend all
 520         cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \
 521             MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
 522             ${MAKE} -DNO_CPU_CFLAGS ${target}
 523 .endfor
 524 .endif
 525 .if !defined(NO_KERNELDEPEND)
 526         cd ${KRNLOBJDIR}/${_kernel}; \
 527             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ
 528 .endif
 529         cd ${KRNLOBJDIR}/${_kernel}; \
 530             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ
 531         @echo "--------------------------------------------------------------"
 532         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 533         @echo "--------------------------------------------------------------"
 534 .endfor
 535
 536 #
 537 # installkernel
 538 #
 539 # Install the kernel defined by INSTALLKERNEL
 540 #
 541 installkernel reinstallkernel:
 542 .if empty(INSTALLKERNEL)
 543         @echo "ERROR: No kernel \"${KERNCONF}\" to install."
 544         @false
 545 .endif
 546         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 547             ${CROSSENV} PATH=${TMPPATH} \
 548             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 549
 550 #
 551 # update
 552 #
 553 # Update the source tree, by running sup and/or running cvs to update to the
 554 # latest copy.
 555 #
 556 update:
 557 .if defined(SUP_UPDATE)
 558         @echo "--------------------------------------------------------------"
 559         @echo ">>> Running ${SUP}"
 560         @echo "--------------------------------------------------------------"
 561 .if defined(SUPFILE)
 562         @${SUP} ${SUPFLAGS} ${SUPFILE}
 563 .endif
 564 .if defined(SUPFILE1)
 565         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 566 .endif
 567 .if defined(SUPFILE2)
 568         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 569 .endif
 570 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 571         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 572 .endif
 573 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 574         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 575 .endif
 576 .endif
 577 .if defined(CVS_UPDATE)
 578         @echo "--------------------------------------------------------------"
 579         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 580         @echo "--------------------------------------------------------------"
 581         cd ${.CURDIR}; ${CVS} -R -q update -A -P -d
 582 .endif
 583
 584 #
 585 # most
 586 #
 587 # Build most of the user binaries on the existing system libs and includes.
 588 #
 589 most:
 590         @echo "--------------------------------------------------------------"
 591         @echo ">>> Building programs only"
 592         @echo "--------------------------------------------------------------"
 593 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
 594         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 595 .endfor
 596
 597 #
 598 # installmost
 599 #
 600 # Install the binaries built by the 'most' target.  This does not include
 601 # libraries or include files.
 602 #
 603 installmost:
 604         @echo "--------------------------------------------------------------"
 605         @echo ">>> Installing programs only"
 606         @echo "--------------------------------------------------------------"
 607 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
 608         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 609 .endfor
 610
 611 #
 612 # ------------------------------------------------------------------------
 613 #
 614 # From here onwards are utility targets used by the 'make world' and
 615 # related targets.  If your 'world' breaks, you may like to try to fix
 616 # the problem and manually run the following targets to attempt to
 617 # complete the build.  Beware, this is *not* guaranteed to work, you
 618 # need to have a pretty good grip on the current state of the system
 619 # to attempt to manually finish it.  If in doubt, 'make world' again.
 620 #
 621
 622 #
 623 # legacy: Build compatibility shims for the next three targets
 624 #
 625 legacy:
 626 .for _tool in tools/build
 627         @${ECHODIR} "===> ${_tool}"; \
 628             cd ${.CURDIR}/${_tool}; \
 629             ${MAKE} DIRPRFX=${_tool}/ obj; \
 630             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
 631             ${MAKE} DIRPRFX=${_tool}/ depend; \
 632             ${MAKE} DIRPRFX=${_tool}/ all; \
 633             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 634 .endfor
 635
 636 #
 637 # bootstrap-tools: Build tools needed for compatibility
 638 #
 639 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 640 _strfile=       games/fortune/strfile
 641 .endif
 642
 643 .if !defined(NO_CXX)
 644 _gperf= gnu/usr.bin/gperf
 645 .if ${BOOTSTRAPPING} < 500113
 646 _groff=         gnu/usr.bin/groff
 647 .else
 648 _groff=         gnu/usr.bin/groff/tmac
 649 .endif
 650 .endif
 651
 652 .if ( ${BOOTSTRAPPING} < 450005 || \
 653     ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 ))
 654 _uudecode=      usr.bin/uudecode
 655 .endif
 656
 657 .if ( ${BOOTSTRAPPING} < 430002 || \
 658     ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 ))
 659 _xargs=         usr.bin/xargs
 660 .endif
 661
 662 .if ( ${BOOTSTRAPPING} < 430002 || \
 663     ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 ))
 664 _yacc=          usr.bin/yacc
 665 .endif
 666
 667 .if ${BOOTSTRAPPING} < 500019
 668 _kbdcontrol=    usr.sbin/kbdcontrol
 669 .endif
 670
 671 bootstrap-tools:
 672 .for _tool in ${_strfile} usr.bin/colldef \
 673     usr.bin/makewhatis usr.bin/rpcgen ${_uudecode} \
 674     ${_xargs} usr.bin/xinstall ${_yacc} \
 675     usr.sbin/config ${_kbdcontrol} \
 676     ${_gperf} ${_groff} gnu/usr.bin/texinfo
 677         @${ECHODIR} "===> ${_tool}"; \
 678                 cd ${.CURDIR}/${_tool}; \
 679                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 680                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 681                 ${MAKE} DIRPRFX=${_tool}/ all; \
 682                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 683 .endfor
 684
 685 #
 686 # build-tools: Build special purpose build tools
 687 #
 688 .if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
 689 _aicasm= sys/modules/aic7xxx/aicasm
 690 .endif
 691
 692 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 693 _share= share/syscons/scrnmaps
 694 .endif
 695
 696 .if !defined(NO_FORTRAN)
 697 _fortran= gnu/usr.bin/cc/f771
 698 .endif
 699
 700 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 701     !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
 702 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 703     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 704 .endif
 705
 706 build-tools:
 707 .for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \
 708     ${_libkrb5} lib/libncurses ${_share} \
 709     ${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall
 710         @${ECHODIR} "===> ${_tool}"; \
 711                 cd ${.CURDIR}/${_tool}; \
 712                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 713                 ${MAKE} DIRPRFX=${_tool}/ build-tools
 714 .endfor
 715
 716 #
 717 # cross-tools: Build cross-building tools
 718 #
 719 .if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH}
 720 _elf2exe=       usr.sbin/elf2exe
 721 .endif
 722
 723 .if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH}
 724 _btxld= usr.sbin/btxld
 725 .if defined(RELEASEDIR)
 726 _kgzip= usr.sbin/kgzip
 727 .endif
 728 .endif
 729
 730 .if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
 731     ${BOOTSTRAPPING} < 500037
 732 _elf2aout=      usr.bin/elf2aout
 733 .endif
 734
 735 .if defined(RELEASEDIR)
 736 _crunchide=     usr.sbin/crunch/crunchide
 737 .endif
 738
 739 _xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint
 740
 741 cross-tools:
 742 .for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \
 743     gnu/usr.bin/binutils ${_crunchide} \
 744     gnu/usr.bin/cc ${_xlint} ${_kgzip}
 745         @${ECHODIR} "===> ${_tool}"; \
 746                 cd ${.CURDIR}/${_tool}; \
 747                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 748                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 749                 ${MAKE} DIRPRFX=${_tool}/ all; \
 750                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
 751 .endfor
 752
 753 #
 754 # hierarchy - ensure that all the needed directories are present
 755 #
 756 hierarchy:
 757         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 758
 759 #
 760 # libraries - build all libraries, and install them under ${DESTDIR}.
 761 #
 762 # The list of libraries with dependents (${_prebuild_libs}) and their
 763 # interdependencies (__L) are built automatically by the
 764 # ${.CURDIR}/tools/make_libdeps.sh script.
 765 #
 766 libraries:
 767         cd ${.CURDIR}; \
 768             ${MAKE} -f Makefile.inc1 _startup_libs; \
 769             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 770             ${MAKE} -f Makefile.inc1 _generic_libs;
 771
 772 # These dependencies are not automatically generated:
 773 #
 774 # gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
 775 # shared libraries for ELF.
 776 #
 777 _startup_libs=  gnu/lib/csu gnu/lib/libgcc
 778 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
 779 _startup_libs+= lib/csu/${MACHINE_ARCH}-elf
 780 .else
 781 _startup_libs+= lib/csu/${MACHINE_ARCH}
 782 .endif
 783
 784 _prebuild_libs=
 785
 786 _generic_libs=  gnu/lib
 787
 788 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 789     !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
 790 _prebuild_libs+=        kerberos5/lib/libasn1
 791 _prebuild_libs+=        kerberos5/lib/libgssapi
 792 _prebuild_libs+=        kerberos5/lib/libkrb5
 793 _prebuild_libs+=        kerberos5/lib/libroken
 794 _generic_libs+= kerberos5/lib
 795 .endif
 796
 797 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \
 798                 lib/libkvm lib/libmd \
 799                 lib/libncurses lib/libopie lib/libpam lib/libradius \
 800                 lib/librpcsvc \
 801                 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
 802                 lib/libz lib/msun
 803
 804 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 805 lib/libypclnt__L: lib/librpcsvc__L
 806
 807 _generic_libs+= lib
 808
 809 .if !defined(NOCRYPT)
 810 .if !defined(NO_OPENSSL)
 811 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 812 .if !defined(NO_OPENSSH)
 813 _prebuild_libs+=        secure/lib/libssh
 814 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 815 .endif
 816 .endif
 817 _generic_libs+= secure/lib
 818 .endif
 819
 820 _generic_libs+= usr.bin/lex/lib
 821
 822 .if ${MACHINE_ARCH} == "i386"
 823 _generic_libs+= usr.sbin/pcvt/keycap
 824 .endif
 825
 826 .for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
 827 ${_lib}__L: .PHONY
 828 .if exists(${.CURDIR}/${_lib})
 829         @${ECHODIR} "===> ${_lib}"; \
 830                 cd ${.CURDIR}/${_lib}; \
 831                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 832                 ${MAKE} DIRPRFX=${_lib}/ all; \
 833                 ${MAKE} DIRPRFX=${_lib}/ install
 834 .endif
 835 .endfor
 836
 837 # libpam is special: we need to build static PAM modules before
 838 # static PAM library, and dynamic PAM library before dynamic PAM
 839 # modules.
 840 lib/libpam__L: .PHONY
 841         @${ECHODIR} "===> lib/libpam"; \
 842                 cd ${.CURDIR}/lib/libpam; \
 843                 ${MAKE} DIRPRFX=lib/libpam/ depend; \
 844                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
 845                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
 846
 847 _startup_libs: ${_startup_libs:S/$/__L/}
 848 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 849 _generic_libs: ${_generic_libs:S/$/__L/}
 850
 851 .for __target in all clean cleandepend cleandir depend includes obj
 852 .for entry in ${SUBDIR}
 853 ${entry}.${__target}__D: .PHONY
 854         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 855                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 856                 edir=${entry}.${MACHINE_ARCH}; \
 857                 cd ${.CURDIR}/$${edir}; \
 858         else \
 859                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 860                 edir=${entry}; \
 861                 cd ${.CURDIR}/$${edir}; \
 862         fi; \
 863         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 864 .endfor
 865 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 866 .endfor
 867
 868 .include <bsd.subdir.mk>