Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DNO_CLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   6 #       -DNO_CLEAN do not clean at all
   7 #       -DNO_SHARE do not go into share subdir
   8 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
   9 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  10 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  11 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  12 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  13 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  14 #       TARGET="machine" to crossbuild world for a different machine type
  15
  16 #
  17 # The intended user-driven targets are:
  18 # buildworld  - rebuild *everything*, including glue to help do upgrades
  19 # installworld- install everything built by "buildworld"
  20 # doxygen     - build API documentation of the kernel
  21 # update      - convenient way to update your source tree (eg: cvsup/cvs)
  22 #
  23 # Standard targets (not defined here) are documented in the makefiles in
  24 # /usr/share/mk.  These include:
  25 #               obj depend all install clean cleandepend cleanobj
  26
  27 .include <bsd.own.mk>
  28
  29 # We must do share/info early so that installation of info `dir'
  30 # entries works correctly.  Do it first since it is less likely to
  31 # grow dependencies on include and lib than vice versa.
  32 #
  33 # We must do lib/ and libexec/ before bin/, because if installworld
  34 # installs a new /bin/sh, the 'make' command will *immediately*
  35 # use that new version.  And the new (dynamically-linked) /bin/sh
  36 # will expect to find appropriate libraries in /lib and /libexec.
  37 #
  38 SUBDIR= share/info lib libexec
  39 SUBDIR+=bin
  40 .if ${MK_GAMES} != "no"
  41 SUBDIR+=games
  42 .endif
  43 .if ${MK_CDDL} != "no"
  44 SUBDIR+=cddl
  45 .endif
  46 SUBDIR+=gnu include
  47 .if ${MK_KERBEROS} != "no"
  48 SUBDIR+=kerberos5
  49 .endif
  50 .if ${MK_RESCUE} != "no"
  51 SUBDIR+=rescue
  52 .endif
  53 SUBDIR+=sbin
  54 .if ${MK_CRYPT} != "no"
  55 SUBDIR+=secure
  56 .endif
  57 .if !defined(NO_SHARE)
  58 SUBDIR+=share
  59 .endif
  60 SUBDIR+=sys usr.bin usr.sbin
  61 #
  62 # We must do etc/ last for install/distribute to work.
  63 #
  64 SUBDIR+=etc
  65
  66 # These are last, since it is nice to at least get the base system
  67 # rebuilt before you do them.
  68 .for _DIR in ${LOCAL_DIRS}
  69 .if exists(${.CURDIR}/${_DIR}/Makefile)
  70 SUBDIR+= ${_DIR}
  71 .endif
  72 .endfor
  73
  74 .if defined(SUBDIR_OVERRIDE)
  75 SUBDIR=         ${SUBDIR_OVERRIDE}
  76 .endif
  77
  78 .if defined(NOCLEAN)
  79 NO_CLEAN=       ${NOCLEAN}
  80 .endif
  81 .if defined(NO_CLEANDIR)
  82 CLEANDIR=       clean cleandepend
  83 .else
  84 CLEANDIR=       cleandir
  85 .endif
  86
  87 CVS?=           cvs
  88 CVSFLAGS?=      -A -P -d -I!
  89 SUP?=           /usr/bin/csup
  90 SUPFLAGS?=      -g -L 2
  91 .if defined(SUPHOST)
  92 SUPFLAGS+=      -h ${SUPHOST}
  93 .endif
  94
  95 MAKEOBJDIRPREFIX?=      /usr/obj
  96 .if !defined(OSRELDATE)
  97 .if exists(/usr/include/osreldate.h)
  98 OSRELDATE!=     awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
  99                 /usr/include/osreldate.h
 100 .else
 101 OSRELDATE=      0
 102 .endif
 103 .endif
 104
 105 # Guess machine architecture from machine type, and vice versa.
 106 .if !defined(TARGET_ARCH) && defined(TARGET)
 107 TARGET_ARCH=    ${TARGET:S/pc98/i386/:S/sun4v/sparc64/}
 108 .elif !defined(TARGET) && defined(TARGET_ARCH) && \
 109     ${TARGET_ARCH} != ${MACHINE_ARCH}
 110 TARGET=         ${TARGET_ARCH}
 111 .endif
 112 # Otherwise, default to current machine type and architecture.
 113 TARGET?=        ${MACHINE}
 114 TARGET_ARCH?=   ${MACHINE_ARCH}
 115
 116 KNOWN_ARCHES?=  amd64 arm i386 i386/pc98 ia64 powerpc sparc64 sparc64/sun4v
 117 .if ${TARGET} == ${TARGET_ARCH}
 118 _t=             ${TARGET}
 119 .else
 120 _t=             ${TARGET_ARCH}/${TARGET}
 121 .endif
 122 .for _t in ${_t}
 123 .if empty(KNOWN_ARCHES:M${_t})
 124 .error Unknown target ${TARGET_ARCH}:${TARGET}.
 125 .endif
 126 .endfor
 127
 128 .if ${TARGET} == ${MACHINE}
 129 TARGET_CPUTYPE?=${CPUTYPE}
 130 .else
 131 TARGET_CPUTYPE?=
 132 .endif
 133
 134 .if !empty(TARGET_CPUTYPE)
 135 _TARGET_CPUTYPE=${TARGET_CPUTYPE}
 136 .else
 137 _TARGET_CPUTYPE=dummy
 138 .endif
 139 _CPUTYPE!=      MAKEFLAGS= CPUTYPE=${_TARGET_CPUTYPE} ${MAKE} \
 140                 -f /dev/null -m ${.CURDIR}/share/mk -V CPUTYPE
 141 .if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
 142 .error CPUTYPE global should be set with ?=.
 143 .endif
 144 .if make(buildworld)
 145 BUILD_ARCH!=    uname -p
 146 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 147 .error To cross-build, set TARGET_ARCH.
 148 .endif
 149 .endif
 150 .if ${MACHINE} == ${TARGET} && !defined(CROSS_BUILD_TESTING)
 151 OBJTREE=        ${MAKEOBJDIRPREFIX}
 152 .else
 153 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET}
 154 .endif
 155 WORLDTMP=       ${OBJTREE}${.CURDIR}/tmp
 156 # /usr/games added for fortune which depend on strfile
 157 BPATH=          ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
 158 XPATH=          ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 159 STRICTTMPPATH=  ${BPATH}:${XPATH}
 160 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 161
 162 INSTALLTMP!=    /usr/bin/mktemp -d -u -t install
 163
 164 #
 165 # Building a world goes through the following stages
 166 #
 167 # 1. legacy stage [BMAKE]
 168 #       This stage is responsible for creating compatibility
 169 #       shims that are needed by the bootstrap-tools,
 170 #       build-tools and cross-tools stages.
 171 # 1. bootstrap-tools stage [BMAKE]
 172 #       This stage is responsible for creating programs that
 173 #       are needed for backward compatibility reasons. They
 174 #       are not built as cross-tools.
 175 # 2. build-tools stage [TMAKE]
 176 #       This stage is responsible for creating the object
 177 #       tree and building any tools that are needed during
 178 #       the build process.
 179 # 3. cross-tools stage [XMAKE]
 180 #       This stage is responsible for creating any tools that
 181 #       are needed for cross-builds. A cross-compiler is one
 182 #       of them.
 183 # 4. world stage [WMAKE]
 184 #       This stage actually builds the world.
 185 # 5. install stage (optional) [IMAKE]
 186 #       This stage installs a previously built world.
 187 #
 188
 189 BOOTSTRAPPING?= 0
 190
 191 # Common environment for world related stages
 192 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 193                 MACHINE_ARCH=${TARGET_ARCH} \
 194                 MACHINE=${TARGET} \
 195                 CPUTYPE=${TARGET_CPUTYPE} \
 196                 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
 197                 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
 198                 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
 199
 200 # bootstrap-tools stage
 201 BMAKEENV=       INSTALL="sh ${.CURDIR}/tools/install.sh" \
 202                 PATH=${BPATH}:${PATH} \
 203                 WORLDTMP=${WORLDTMP} \
 204                 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
 205 BMAKE=          MAKEOBJDIRPREFIX=${WORLDTMP} \
 206                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 207                 DESTDIR= \
 208                 BOOTSTRAPPING=${OSRELDATE} \
 209                 -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT -DWITHOUT_MAN \
 210                 -DWITHOUT_NLS -DNO_PIC -DWITHOUT_PROFILE -DNO_SHARED \
 211                 -DNO_CPU_CFLAGS -DNO_WARNS
 212
 213 # build-tools stage
 214 TMAKE=          MAKEOBJDIRPREFIX=${OBJTREE} \
 215                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 216                 TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \
 217                 DESTDIR= \
 218                 BOOTSTRAPPING=${OSRELDATE} -DNO_LINT -DNO_CPU_CFLAGS -DNO_WARNS
 219
 220 # cross-tools stage
 221 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} \
 222                 TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \
 223                 -DWITHOUT_FORTRAN -DWITHOUT_GDB
 224
 225 # world stage
 226 WMAKEENV=       ${CROSSENV} \
 227                 _SHLIBDIRPREFIX=${WORLDTMP} \
 228                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 229                 PATH=${TMPPATH}
 230 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1 DESTDIR=${WORLDTMP}
 231
 232 .if ${TARGET_ARCH} == "amd64"
 233 # 32 bit world
 234 LIB32TMP=       ${OBJTREE}${.CURDIR}/lib32
 235
 236 .if empty(TARGET_CPUTYPE)
 237 LIB32CPUTYPE=   k8
 238 .else
 239 LIB32CPUTYPE=   ${TARGET_CPUTYPE}
 240 .endif
 241 LIB32FLAGS=     -m32 -march=${LIB32CPUTYPE} -mfancy-math-387 -DCOMPAT_32BIT \
 242                 -iprefix ${LIB32TMP}/usr/ \
 243                 -L${LIB32TMP}/usr/lib32 \
 244                 -B${LIB32TMP}/usr/lib32
 245
 246 # Yes, the flags are redundant.
 247 LIB32WMAKEENV=  MAKEOBJDIRPREFIX=${OBJTREE}/lib32 \
 248                 _SHLIBDIRPREFIX=${LIB32TMP} \
 249                 MACHINE=i386 \
 250                 MACHINE_ARCH=i386 \
 251                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 252                 PATH=${TMPPATH} \
 253                 CC="${CC} ${LIB32FLAGS}" \
 254                 CXX="${CXX} ${LIB32FLAGS}" \
 255                 OBJC="${OBJC} ${LIB32FLAGS}" \
 256                 LD="${LD} -m elf_i386_fbsd -Y P,${LIB32TMP}/usr/lib32" \
 257                 AS="${AS} --32" \
 258                 LIBDIR=/usr/lib32 \
 259                 SHLIBDIR=/usr/lib32
 260
 261 LIB32WMAKE=     ${LIB32WMAKEENV} ${MAKE} -DNO_CPU_CFLAGS -DCOMPAT_32BIT \
 262                 -DWITHOUT_BIND -DWITHOUT_MAN -DWITHOUT_NLS -DWITHOUT_INFO \
 263                 -DWITHOUT_HTML DESTDIR=${LIB32TMP}
 264 LIB32IMAKE=     ${LIB32WMAKE:NINSTALL=*:NDESTDIR=*} -DNO_INCS
 265 .endif
 266
 267 # install stage
 268 .if empty(.MAKEFLAGS:M-n)
 269 IMAKEENV=       ${CROSSENV} \
 270                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 271 .else
 272 IMAKEENV=       ${CROSSENV} \
 273                 PATH=${TMPPATH}:${INSTALLTMP}
 274 .endif
 275 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 276
 277 # kernel stage
 278 KMAKEENV=       ${WMAKEENV}
 279 KMAKE=          ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME}
 280
 281 #
 282 # buildworld
 283 #
 284 # Attempt to rebuild the entire system, with reasonable chance of
 285 # success, regardless of how old your existing system is.
 286 #
 287 _worldtmp:
 288 .if ${.CURDIR:C/[^,]//g} != ""
 289 #       The m4 build of sendmail files doesn't like it if ',' is used
 290 #       anywhere in the path of it's files.
 291         @echo
 292         @echo "*** Error: path to source tree contains a comma ','"
 293         @echo
 294         false
 295 .endif
 296         @echo
 297         @echo "--------------------------------------------------------------"
 298         @echo ">>> Rebuilding the temporary build tree"
 299         @echo "--------------------------------------------------------------"
 300 .if !defined(NO_CLEAN)
 301         rm -rf ${WORLDTMP}
 302 .if ${TARGET_ARCH} == "amd64"
 303         rm -rf ${LIB32TMP}
 304 .endif
 305 .else
 306         rm -rf ${WORLDTMP}/legacy/usr/include
 307 #       XXX - These two can depend on any header file.
 308         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 309         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 310 .endif
 311 .for _dir in \
 312     usr/bin usr/games usr/include/sys usr/lib \
 313     usr/libexec usr/sbin usr/share/dict \
 314     usr/share/groff_font/devX100 \
 315     usr/share/groff_font/devX100-12 \
 316     usr/share/groff_font/devX75 \
 317     usr/share/groff_font/devX75-12 \
 318     usr/share/groff_font/devascii \
 319     usr/share/groff_font/devcp1047 \
 320     usr/share/groff_font/devdvi \
 321     usr/share/groff_font/devhtml \
 322     usr/share/groff_font/devkoi8-r \
 323     usr/share/groff_font/devlatin1 \
 324     usr/share/groff_font/devlbp \
 325     usr/share/groff_font/devlj4 \
 326     usr/share/groff_font/devps \
 327     usr/share/groff_font/devutf8 \
 328     usr/share/tmac/mdoc usr/share/tmac/mm
 329         mkdir -p ${WORLDTMP}/legacy/${_dir}
 330 .endfor
 331 .for _dir in \
 332     lib usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \
 333     usr/libexec usr/sbin usr/share/misc \
 334     usr/share/snmp/defs usr/share/snmp/mibs
 335         mkdir -p ${WORLDTMP}/${_dir}
 336 .endfor
 337         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
 338             -p ${WORLDTMP}/usr/include >/dev/null
 339         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 340 .if ${MK_BIND_LIBS} != "no"
 341         mtree -deU -f ${.CURDIR}/etc/mtree/BIND.include.dist \
 342             -p ${WORLDTMP}/usr/include >/dev/null
 343 .endif
 344 _legacy:
 345         @echo
 346         @echo "--------------------------------------------------------------"
 347         @echo ">>> stage 1.1: legacy release compatibility shims"
 348         @echo "--------------------------------------------------------------"
 349         ${_+_}cd ${.CURDIR}; ${BMAKE} legacy
 350 _bootstrap-tools:
 351         @echo
 352         @echo "--------------------------------------------------------------"
 353         @echo ">>> stage 1.2: bootstrap tools"
 354         @echo "--------------------------------------------------------------"
 355         ${_+_}cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 356 _cleanobj:
 357 .if !defined(NO_CLEAN)
 358         @echo
 359         @echo "--------------------------------------------------------------"
 360         @echo ">>> stage 2.1: cleaning up the object tree"
 361         @echo "--------------------------------------------------------------"
 362         ${_+_}cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 363 .if ${TARGET_ARCH} == "amd64"
 364         ${_+_}cd ${.CURDIR}; ${LIB32WMAKE} -f Makefile.inc1 ${CLEANDIR:S/^/par-/}
 365 .endif
 366 .endif
 367 _obj:
 368         @echo
 369         @echo "--------------------------------------------------------------"
 370         @echo ">>> stage 2.2: rebuilding the object tree"
 371         @echo "--------------------------------------------------------------"
 372         ${_+_}cd ${.CURDIR}; ${WMAKE} par-obj
 373 _build-tools:
 374         @echo
 375         @echo "--------------------------------------------------------------"
 376         @echo ">>> stage 2.3: build tools"
 377         @echo "--------------------------------------------------------------"
 378         ${_+_}cd ${.CURDIR}; ${TMAKE} build-tools
 379 _cross-tools:
 380         @echo
 381         @echo "--------------------------------------------------------------"
 382         @echo ">>> stage 3: cross tools"
 383         @echo "--------------------------------------------------------------"
 384         ${_+_}cd ${.CURDIR}; ${XMAKE} cross-tools
 385 _includes:
 386         @echo
 387         @echo "--------------------------------------------------------------"
 388         @echo ">>> stage 4.1: building includes"
 389         @echo "--------------------------------------------------------------"
 390         ${_+_}cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 391 _libraries:
 392         @echo
 393         @echo "--------------------------------------------------------------"
 394         @echo ">>> stage 4.2: building libraries"
 395         @echo "--------------------------------------------------------------"
 396         ${_+_}cd ${.CURDIR}; \
 397             ${WMAKE} -DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \
 398             -DWITHOUT_MAN -DWITHOUT_NLS -DWITHOUT_PROFILE libraries
 399 _depend:
 400         @echo
 401         @echo "--------------------------------------------------------------"
 402         @echo ">>> stage 4.3: make dependencies"
 403         @echo "--------------------------------------------------------------"
 404         ${_+_}cd ${.CURDIR}; ${WMAKE} par-depend
 405 everything:
 406         @echo
 407         @echo "--------------------------------------------------------------"
 408         @echo ">>> stage 4.4: building everything"
 409         @echo "--------------------------------------------------------------"
 410         ${_+_}cd ${.CURDIR}; ${WMAKE} par-all
 411 .if ${TARGET_ARCH} == "amd64"
 412 build32:
 413         @echo
 414         @echo "--------------------------------------------------------------"
 415         @echo ">>> stage 5.1: building 32 bit shim libraries"
 416         @echo "--------------------------------------------------------------"
 417 .for _dir in \
 418     lib lib32 usr/bin usr/include usr/lib32 usr/libdata/ldscripts \
 419     usr/libexec usr/sbin usr/share/misc \
 420     usr/share/snmp/defs usr/share/snmp/mibs
 421         mkdir -p ${LIB32TMP}/${_dir}
 422 .endfor
 423         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
 424             -p ${LIB32TMP}/usr/include >/dev/null
 425         mkdir -p ${WORLDTMP}
 426         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 427 .if ${MK_KERBEROS} != "no"
 428 .for _t in obj depend all
 429         cd ${.CURDIR}/kerberos5/tools; \
 430             MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= ${_t}
 431 .endfor
 432 .endif
 433 .for _t in obj includes
 434         cd ${.CURDIR}/include; ${LIB32WMAKE} ${_t}
 435         cd ${.CURDIR}/lib; ${LIB32WMAKE} ${_t}
 436 .if ${MK_CDDL} != "no"
 437         cd ${.CURDIR}/cddl/lib; ${LIB32WMAKE} ${_t}
 438 .endif
 439         cd ${.CURDIR}/gnu/lib; ${LIB32WMAKE} ${_t}
 440 .if ${MK_CRYPT} != "no"
 441         cd ${.CURDIR}/secure/lib; ${LIB32WMAKE} ${_t}
 442 .endif
 443 .if ${MK_KERBEROS} != "no"
 444         cd ${.CURDIR}/kerberos5/lib; ${LIB32WMAKE} ${_t}
 445 .endif
 446 .endfor
 447 .for _dir in usr.bin/lex/lib
 448         cd ${.CURDIR}/${_dir}; ${LIB32WMAKE} obj
 449 .endfor
 450 .for _dir in lib/ncurses/ncurses lib/ncurses/ncursesw lib/libmagic
 451         cd ${.CURDIR}/${_dir}; \
 452             MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= build-tools
 453 .endfor
 454         cd ${.CURDIR}; \
 455             ${LIB32WMAKE} -f Makefile.inc1 libraries
 456 .for _t in obj depend all
 457         cd ${.CURDIR}/libexec/rtld-elf; \
 458             PROG=ld-elf32.so.1 ${LIB32WMAKE} ${_t}
 459 .endfor
 460
 461 distribute32 install32:
 462 .if make(distribute32)
 463         mkdir -p ${DISTDIR}/${DISTRIBUTION}/usr/lib32   # XXX add to mtree
 464 .else
 465         mkdir -p ${DESTDIR}/usr/lib32                   # XXX add to mtree
 466 .endif
 467         cd ${.CURDIR}/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
 468         cd ${.CURDIR}/gnu/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
 469 .if ${MK_CRYPT} != "no"
 470         cd ${.CURDIR}/secure/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
 471 .endif
 472         cd ${.CURDIR}/libexec/rtld-elf; PROG=ld-elf32.so.1 ${LIB32IMAKE} ${.TARGET:S/32$//}
 473 .endif
 474
 475
 476 WMAKE_TGTS=
 477 .if !defined(SUBDIR_OVERRIDE)
 478 WMAKE_TGTS+=    _worldtmp _legacy _bootstrap-tools
 479 .endif
 480 WMAKE_TGTS+=    _cleanobj _obj _build-tools
 481 .if !defined(SUBDIR_OVERRIDE)
 482 WMAKE_TGTS+=    _cross-tools
 483 .endif
 484 WMAKE_TGTS+=    _includes _libraries _depend everything
 485 .if ${TARGET_ARCH} == "amd64" && ${MK_LIB32} != "no"
 486 WMAKE_TGTS+=    build32
 487 .endif
 488
 489 buildworld: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue
 490 .ORDER: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue
 491
 492 buildworld_prologue:
 493         @echo "--------------------------------------------------------------"
 494         @echo ">>> World build started on `LC_ALL=C date`"
 495         @echo "--------------------------------------------------------------"
 496
 497 buildworld_epilogue:
 498         @echo
 499         @echo "--------------------------------------------------------------"
 500         @echo ">>> World build completed on `LC_ALL=C date`"
 501         @echo "--------------------------------------------------------------"
 502
 503 #
 504 # We need to have this as a target because the indirection between Makefile
 505 # and Makefile.inc1 causes the correct PATH to be used, rather than a
 506 # modification of the current environment's PATH.  In addition, we need
 507 # to quote multiword values.
 508 #
 509 buildenvvars:
 510         @echo ${WMAKEENV:Q}
 511
 512 buildenv:
 513         @echo Entering world for ${TARGET_ARCH}:${TARGET}
 514         @cd ${.CURDIR} && env ${WMAKEENV} sh || true
 515
 516 TOOLCHAIN_TGTS= ${WMAKE_TGTS:N_depend:Neverything:Nbuild32}
 517 toolchain: ${TOOLCHAIN_TGTS}
 518 kernel-toolchain: ${TOOLCHAIN_TGTS:N_includes:N_libraries}
 519
 520 #
 521 # installcheck
 522 #
 523 # Checks to be sure system is ready for installworld/installkernel.
 524 #
 525 installcheck:
 526
 527 #
 528 # Require DESTDIR to be set if installing for a different architecture.
 529 #
 530 .if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${TARGET} != ${MACHINE}
 531 .if !make(distributeworld)
 532 installcheck: installcheck_DESTDIR
 533 installcheck_DESTDIR:
 534 .if !defined(DESTDIR) || empty(DESTDIR)
 535         @echo "ERROR: Please set DESTDIR!"; \
 536         false
 537 .endif
 538 .endif
 539 .endif
 540
 541 #
 542 # Check for missing UIDs/GIDs.
 543 #
 544 CHECK_UIDS=
 545 CHECK_GIDS=     audit
 546 .if ${MK_SENDMAIL} != "no"
 547 CHECK_UIDS+=    smmsp
 548 CHECK_GIDS+=    smmsp
 549 .endif
 550 .if ${MK_PF} != "no"
 551 CHECK_UIDS+=    proxy
 552 CHECK_GIDS+=    proxy authpf
 553 .endif
 554 installcheck: installcheck_UGID
 555 installcheck_UGID:
 556 .for uid in ${CHECK_UIDS}
 557         @if ! `id -u ${uid} >/dev/null 2>&1`; then \
 558                 echo "ERROR: Required ${uid} user is missing, see /usr/src/UPDATING."; \
 559                 false; \
 560         fi
 561 .endfor
 562 .for gid in ${CHECK_GIDS}
 563         @if ! `find / -prune -group ${gid} >/dev/null 2>&1`; then \
 564                 echo "ERROR: Required ${gid} group is missing, see /usr/src/UPDATING."; \
 565                 false; \
 566         fi
 567 .endfor
 568
 569 #
 570 # distributeworld
 571 #
 572 # Distributes everything compiled by a `buildworld'.
 573 #
 574 # installworld
 575 #
 576 # Installs everything compiled by a 'buildworld'.
 577 #
 578 distributeworld installworld: installcheck
 579         mkdir -p ${INSTALLTMP}
 580         for prog in [ awk cap_mkdb cat chflags chmod chown \
 581             date echo egrep find grep install-info \
 582             ln lockf make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
 583             test true uname wc zic; do \
 584                 cp `which $$prog` ${INSTALLTMP}; \
 585         done
 586         ${_+_}cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 587         rm -rf ${INSTALLTMP}
 588
 589 #
 590 # reinstall
 591 #
 592 # If you have a build server, you can NFS mount the source and obj directories
 593 # and do a 'make reinstall' on the *client* to install new binaries from the
 594 # most recent server build.
 595 #
 596 reinstall:
 597         @echo "--------------------------------------------------------------"
 598         @echo ">>> Making hierarchy"
 599         @echo "--------------------------------------------------------------"
 600         ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 601         @echo
 602         @echo "--------------------------------------------------------------"
 603         @echo ">>> Installing everything"
 604         @echo "--------------------------------------------------------------"
 605         ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 606 .if ${TARGET_ARCH} == "amd64" && ${MK_LIB32} != "no"
 607         ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install32
 608 .endif
 609
 610 redistribute:
 611         @echo "--------------------------------------------------------------"
 612         @echo ">>> Distributing everything"
 613         @echo "--------------------------------------------------------------"
 614         ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 615 .if ${TARGET_ARCH} == "amd64" && ${MK_LIB32} != "no"
 616         ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute32 DISTRIBUTION=lib32
 617 .endif
 618
 619 distrib-dirs distribution:
 620         cd ${.CURDIR}/etc; ${CROSSENV} PATH=${TMPPATH} ${MAKE} ${.TARGET}
 621
 622 #
 623 # buildkernel and installkernel
 624 #
 625 # Which kernels to build and/or install is specified by setting
 626 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 627 # Only the existing (depending TARGET) config files are used
 628 # for building kernels and only the first of these is designated
 629 # as the one being installed.
 630 #
 631 # Note that we have to use TARGET instead of TARGET_ARCH when
 632 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 633 # be set to cross-build, we have to make sure TARGET is set
 634 # properly.
 635
 636 .if !defined(KERNCONF) && defined(KERNEL)
 637 KERNCONF=       ${KERNEL}
 638 KERNWARN=
 639 .else
 640 KERNCONF?=      GENERIC
 641 .endif
 642 INSTKERNNAME?=  kernel
 643
 644 KERNSRCDIR?=    ${.CURDIR}/sys
 645 KRNLCONFDIR=    ${KERNSRCDIR}/${TARGET}/conf
 646 KRNLOBJDIR=     ${OBJTREE}${KERNSRCDIR}
 647 KERNCONFDIR?=   ${KRNLCONFDIR}
 648
 649 BUILDKERNELS=
 650 INSTALLKERNEL=
 651 .for _kernel in ${KERNCONF}
 652 .if exists(${KERNCONFDIR}/${_kernel})
 653 BUILDKERNELS+=  ${_kernel}
 654 .if empty(INSTALLKERNEL)
 655 INSTALLKERNEL= ${_kernel}
 656 .endif
 657 .endif
 658 .endfor
 659
 660 #
 661 # buildkernel
 662 #
 663 # Builds all kernels defined by BUILDKERNELS.
 664 #
 665 buildkernel:
 666 .if empty(BUILDKERNELS)
 667         @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; \
 668         false
 669 .endif
 670 .if defined(KERNWARN)
 671         @echo "--------------------------------------------------------------"
 672         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 673         @echo "--------------------------------------------------------------"
 674         @sleep 3
 675 .endif
 676         @echo
 677 .for _kernel in ${BUILDKERNELS}
 678         @echo "--------------------------------------------------------------"
 679         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 680         @echo "--------------------------------------------------------------"
 681         @echo "===> ${_kernel}"
 682         mkdir -p ${KRNLOBJDIR}
 683 .if !defined(NO_KERNELCONFIG)
 684         @echo
 685         @echo "--------------------------------------------------------------"
 686         @echo ">>> stage 1: configuring the kernel"
 687         @echo "--------------------------------------------------------------"
 688         cd ${KRNLCONFDIR}; \
 689                 PATH=${TMPPATH} \
 690                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 691                         ${KERNCONFDIR}/${_kernel}
 692 .endif
 693 .if !defined(NO_CLEAN) && !defined(NO_KERNELCLEAN)
 694         @echo
 695         @echo "--------------------------------------------------------------"
 696         @echo ">>> stage 2.1: cleaning up the object tree"
 697         @echo "--------------------------------------------------------------"
 698         cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} ${CLEANDIR}
 699 .endif
 700         @echo
 701         @echo "--------------------------------------------------------------"
 702         @echo ">>> stage 2.2: rebuilding the object tree"
 703         @echo "--------------------------------------------------------------"
 704         cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} obj
 705         @echo
 706         @echo "--------------------------------------------------------------"
 707         @echo ">>> stage 2.3: build tools"
 708         @echo "--------------------------------------------------------------"
 709         cd ${KRNLOBJDIR}/${_kernel}; \
 710             MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
 711             ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
 712 # XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
 713 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
 714 .for target in obj depend all
 715         cd ${KERNSRCDIR}/modules/aic7xxx/aicasm; \
 716             MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
 717             ${MAKE} -DNO_CPU_CFLAGS ${target}
 718 .endfor
 719 .endif
 720 .if !defined(NO_KERNELDEPEND)
 721         @echo
 722         @echo "--------------------------------------------------------------"
 723         @echo ">>> stage 3.1: making dependencies"
 724         @echo "--------------------------------------------------------------"
 725         cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} depend -DNO_MODULES_OBJ
 726 .endif
 727         @echo
 728         @echo "--------------------------------------------------------------"
 729         @echo ">>> stage 3.2: building everything"
 730         @echo "--------------------------------------------------------------"
 731         cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} all -DNO_MODULES_OBJ
 732         @echo "--------------------------------------------------------------"
 733         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 734         @echo "--------------------------------------------------------------"
 735 .endfor
 736
 737 #
 738 # installkernel, etc.
 739 #
 740 # Install the kernel defined by INSTALLKERNEL
 741 #
 742 installkernel installkernel.debug \
 743 reinstallkernel reinstallkernel.debug: installcheck
 744 .if empty(INSTALLKERNEL)
 745         @echo "ERROR: No kernel \"${KERNCONF}\" to install."; \
 746         false
 747 .endif
 748         @echo "--------------------------------------------------------------"
 749         @echo ">>> Installing kernel"
 750         @echo "--------------------------------------------------------------"
 751         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 752             ${CROSSENV} PATH=${TMPPATH} \
 753             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//}
 754
 755 #
 756 # doxygen
 757 #
 758 # Build the API documentation with doxygen
 759 #
 760 doxygen:
 761         @if [ ! -x `/usr/bin/which doxygen` ]; then \
 762                 echo "You need doxygen (devel/doxygen) to generate the API documentation of the kernel." | /usr/bin/fmt; \
 763                 exit 1; \
 764         fi
 765         cd ${.CURDIR}/tools/kerneldoc/subsys && ${MAKE} obj all
 766
 767 #
 768 # update
 769 #
 770 # Update the source tree, by running cvsup and/or running cvs to update to the
 771 # latest copy.
 772 #
 773 update:
 774 .if defined(SUP_UPDATE)
 775         @echo "--------------------------------------------------------------"
 776         @echo ">>> Running ${SUP}"
 777         @echo "--------------------------------------------------------------"
 778 .if defined(SUPFILE)
 779         @${SUP} ${SUPFLAGS} ${SUPFILE}
 780 .endif
 781 .if defined(SUPFILE1)
 782         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 783 .endif
 784 .if defined(SUPFILE2)
 785         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 786 .endif
 787 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 788         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 789 .endif
 790 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 791         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 792 .endif
 793 .endif
 794 .if defined(CVS_UPDATE)
 795         @echo "--------------------------------------------------------------"
 796         @echo ">>> Updating ${.CURDIR} from CVS repository" ${CVSROOT}
 797         @echo "--------------------------------------------------------------"
 798         cd ${.CURDIR}; ${CVS} -R -q update ${CVSFLAGS}
 799 .endif
 800
 801 #
 802 # ------------------------------------------------------------------------
 803 #
 804 # From here onwards are utility targets used by the 'make world' and
 805 # related targets.  If your 'world' breaks, you may like to try to fix
 806 # the problem and manually run the following targets to attempt to
 807 # complete the build.  Beware, this is *not* guaranteed to work, you
 808 # need to have a pretty good grip on the current state of the system
 809 # to attempt to manually finish it.  If in doubt, 'make world' again.
 810 #
 811
 812 #
 813 # legacy: Build compatibility shims for the next three targets
 814 #
 815 legacy:
 816 .if ${BOOTSTRAPPING} < 503000
 817         @echo "ERROR: Source upgrades from versions prior to 5.3 not supported."; \
 818         false
 819 .endif
 820 .for _tool in tools/build
 821         ${_+_}@${ECHODIR} "===> ${_tool} (obj,includes,depend,all,install)"; \
 822             cd ${.CURDIR}/${_tool}; \
 823             ${MAKE} DIRPRFX=${_tool}/ obj; \
 824             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
 825             ${MAKE} DIRPRFX=${_tool}/ depend; \
 826             ${MAKE} DIRPRFX=${_tool}/ all; \
 827             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 828 .endfor
 829
 830 #
 831 # bootstrap-tools: Build tools needed for compatibility
 832 #
 833 .if ${MK_GAMES} != "no"
 834 _strfile=       games/fortune/strfile
 835 .endif
 836
 837 .if ${MK_CXX} != "no"
 838 _gperf=         gnu/usr.bin/gperf
 839 .if ${BOOTSTRAPPING} < 700004
 840 _groff=         gnu/usr.bin/groff
 841 .else
 842 _groff=         gnu/usr.bin/groff/tmac
 843 .endif
 844 .endif
 845
 846 .if ${BOOTSTRAPPING} < 600029
 847 _texinfo=       gnu/usr.bin/texinfo
 848 .endif
 849
 850 .if ${BOOTSTRAPPING} < 600015
 851 _cap_mkdb=      usr.bin/cap_mkdb
 852 .endif
 853
 854 .if ${BOOTSTRAPPING} < 600018
 855 _colldef=       usr.bin/colldef
 856 .endif
 857
 858 .if ${BOOTSTRAPPING} < 600017
 859 _gencat=        usr.bin/gencat
 860 .endif
 861
 862 .if ${BOOTSTRAPPING} < 600016
 863 _mklocale=      usr.bin/mklocale
 864 .endif
 865
 866 .if ${BOOTSTRAPPING} < 700018
 867 _gensnmptree=   usr.sbin/bsnmpd/gensnmptree
 868 .endif
 869
 870 .if ${MK_RESCUE} != "no" && \
 871     ${BOOTSTRAPPING} < 700026
 872 _crunchgen=     usr.sbin/crunch/crunchgen
 873 .endif
 874
 875 .if ${BOOTSTRAPPING} < 600020
 876 _pwd_mkdb=      usr.sbin/pwd_mkdb
 877 .endif
 878
 879 bootstrap-tools:
 880 .for _tool in \
 881     ${_strfile} \
 882     ${_gperf} \
 883     ${_groff} \
 884     ${_texinfo} \
 885     ${_cap_mkdb} \
 886     ${_colldef} \
 887     ${_gencat} \
 888     usr.bin/lorder \
 889     usr.bin/makewhatis \
 890     ${_mklocale} \
 891     usr.bin/rpcgen \
 892     usr.bin/xinstall \
 893     ${_gensnmptree} \
 894     usr.sbin/config \
 895     ${_crunchgen} \
 896     ${_pwd_mkdb}
 897         ${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
 898                 cd ${.CURDIR}/${_tool}; \
 899                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 900                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 901                 ${MAKE} DIRPRFX=${_tool}/ all; \
 902                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 903 .endfor
 904
 905 #
 906 # build-tools: Build special purpose build tools
 907 #
 908 .if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
 909 _aicasm= sys/modules/aic7xxx/aicasm
 910 .endif
 911
 912 .if !defined(NO_SHARE)
 913 _share= share/syscons/scrnmaps
 914 .endif
 915
 916 .if ${MK_KERBEROS} != "no"
 917 _kerberos5_tools= kerberos5/tools
 918 .endif
 919
 920 .if ${MK_RESCUE} != "no"
 921 _rescue= rescue/rescue
 922 .endif
 923
 924 build-tools:
 925 .for _tool in \
 926     bin/csh \
 927     bin/sh \
 928     ${_rescue} \
 929     lib/ncurses/ncurses \
 930     lib/ncurses/ncursesw \
 931     ${_share} \
 932     ${_aicasm} \
 933     usr.bin/awk \
 934     lib/libmagic \
 935     usr.sbin/sysinstall
 936         ${_+_}@${ECHODIR} "===> ${_tool} (obj,build-tools)"; \
 937                 cd ${.CURDIR}/${_tool}; \
 938                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 939                 ${MAKE} DIRPRFX=${_tool}/ build-tools
 940 .endfor
 941 .for _tool in \
 942     gnu/usr.bin/cc/cc_tools \
 943     ${_kerberos5_tools}
 944         ${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all)"; \
 945                 cd ${.CURDIR}/${_tool}; \
 946                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 947                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 948                 ${MAKE} DIRPRFX=${_tool}/ all
 949 .endfor
 950
 951 #
 952 # cross-tools: Build cross-building tools
 953 #
 954 .if ${TARGET_ARCH} != ${MACHINE_ARCH}
 955 .if ${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "i386"
 956 _btxld=         usr.sbin/btxld
 957 .endif
 958 .if ${MK_RESCUE} != "no" || defined(RELEASEDIR)
 959 _crunchide=     usr.sbin/crunch/crunchide
 960 .endif
 961 .if ${TARGET_ARCH} == "i386" && defined(RELEASEDIR)
 962 _kgzip=         usr.sbin/kgzip
 963 .endif
 964 .endif
 965
 966 cross-tools:
 967 .for _tool in \
 968     gnu/usr.bin/binutils \
 969     gnu/usr.bin/cc \
 970     usr.bin/sed \
 971     usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \
 972     ${_btxld} \
 973     ${_crunchide} \
 974     ${_kgzip}
 975         ${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
 976                 cd ${.CURDIR}/${_tool}; \
 977                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 978                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 979                 ${MAKE} DIRPRFX=${_tool}/ all; \
 980                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
 981 .endfor
 982
 983 #
 984 # hierarchy - ensure that all the needed directories are present
 985 #
 986 hierarchy:
 987         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 988
 989 #
 990 # libraries - build all libraries, and install them under ${DESTDIR}.
 991 #
 992 # The list of libraries with dependents (${_prebuild_libs}) and their
 993 # interdependencies (__L) are built automatically by the
 994 # ${.CURDIR}/tools/make_libdeps.sh script.
 995 #
 996 libraries:
 997         cd ${.CURDIR}; \
 998             ${MAKE} -f Makefile.inc1 _prereq_libs; \
 999             ${MAKE} -f Makefile.inc1 _startup_libs; \
1000             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
1001             ${MAKE} -f Makefile.inc1 _generic_libs;
1002
1003 #
1004 # static libgcc.a prerequisite for shared libc
1005 #
1006 _prereq_libs= gnu/lib/libgcc
1007
1008 # These dependencies are not automatically generated:
1009 #
1010 # gnu/lib/csu, gnu/lib/libgcc, lib/csu and lib/libc must be built before
1011 # all shared libraries for ELF.
1012 #
1013 _startup_libs=  gnu/lib/csu
1014 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
1015 _startup_libs+= lib/csu/${MACHINE_ARCH}-elf
1016 .else
1017 _startup_libs+= lib/csu/${MACHINE_ARCH}
1018 .endif
1019 _startup_libs+= gnu/lib/libgcc
1020 _startup_libs+= lib/libc
1021
1022 gnu/lib/libgcc__L: lib/libc__L
1023
1024 _prebuild_libs= ${_kerberos5_lib_libasn1} ${_kerberos5_lib_libkrb5} \
1025                 ${_kerberos5_lib_libroken} \
1026                 lib/libbz2 lib/libcom_err lib/libcrypt lib/libexpat \
1027                 ${_lib_libgssapi} ${_lib_libipx} \
1028                 lib/libkiconv lib/libkvm lib/libmd \
1029                 lib/ncurses/ncurses lib/ncurses/ncursesw \
1030                 lib/libopie lib/libpam lib/${DEFAULT_THREAD_LIB} \
1031                 lib/libradius lib/libsbuf lib/libtacplus lib/libutil \
1032                 ${_lib_libypclnt} lib/libz lib/msun \
1033                 ${_secure_lib_libcrypto} ${_secure_lib_libssh} \
1034                 ${_secure_lib_libssl}
1035
1036 _generic_libs=  ${_cddl_lib} gnu/lib ${_kerberos5_lib} lib ${_secure_lib} usr.bin/lex/lib
1037
1038 lib/libopie__L lib/libtacplus__L: lib/libmd__L
1039
1040 .if ${MK_CDDL} != "no"
1041 _cddl_lib= cddl/lib
1042 .endif
1043
1044 .if ${MK_CRYPT} != "no"
1045 .if ${MK_OPENSSL} != "no"
1046 _secure_lib_libcrypto= secure/lib/libcrypto
1047 _secure_lib_libssl= secure/lib/libssl
1048 lib/libradius__L secure/lib/libssl__L: secure/lib/libcrypto__L
1049 .if ${MK_OPENSSH} != "no"
1050 _secure_lib_libssh= secure/lib/libssh
1051 secure/lib/libssh__L: lib/libz__L secure/lib/libcrypto__L lib/libcrypt__L
1052 .if ${MK_KERBEROS} != "no"
1053 secure/lib/libssh__L: lib/libgssapi__L kerberos5/lib/libkrb5__L \
1054     kerberos5/lib/libasn1__L lib/libcom_err__L lib/libmd__L \
1055     kerberos5/lib/libroken__L
1056 .endif
1057 .endif
1058 .endif
1059 _secure_lib=    secure/lib
1060 .endif
1061
1062 .if ${MK_IPX} != "no"
1063 _lib_libipx=    lib/libipx
1064 .endif
1065
1066 .if ${MK_KERBEROS} != "no"
1067 _kerberos5_lib= kerberos5/lib
1068 _kerberos5_lib_libasn1= kerberos5/lib/libasn1
1069 _kerberos5_lib_libkrb5= kerberos5/lib/libkrb5
1070 _kerberos5_lib_libroken= kerberos5/lib/libroken
1071 _lib_libgssapi= lib/libgssapi
1072 .endif
1073
1074 .if ${MK_NIS} != "no"
1075 _lib_libypclnt= lib/libypclnt
1076 .endif
1077
1078 .if ${MK_OPENSSL} == "no"
1079 lib/libradius__L: lib/libmd__L
1080 .endif
1081
1082 .for _lib in ${_prereq_libs}
1083 ${_lib}__PL: .PHONY
1084 .if exists(${.CURDIR}/${_lib})
1085         ${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \
1086                 cd ${.CURDIR}/${_lib}; \
1087                 ${MAKE} DIRPRFX=${_lib}/ obj; \
1088                 ${MAKE} DIRPRFX=${_lib}/ depend; \
1089                 ${MAKE} -DWITHOUT_PROFILE -DNO_PIC DIRPRFX=${_lib}/ all; \
1090                 ${MAKE} -DWITHOUT_PROFILE -DNO_PIC DIRPRFX=${_lib}/ install
1091 .endif
1092 .endfor
1093
1094 .for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
1095 ${_lib}__L: .PHONY
1096 .if exists(${.CURDIR}/${_lib})
1097         ${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \
1098                 cd ${.CURDIR}/${_lib}; \
1099                 ${MAKE} DIRPRFX=${_lib}/ obj; \
1100                 ${MAKE} DIRPRFX=${_lib}/ depend; \
1101                 ${MAKE} DIRPRFX=${_lib}/ all; \
1102                 ${MAKE} DIRPRFX=${_lib}/ install
1103 .endif
1104 .endfor
1105
1106 # libpam is special: we need to build static PAM modules before
1107 # static PAM library, and dynamic PAM library before dynamic PAM
1108 # modules.
1109 lib/libpam__L: .PHONY
1110         ${_+_}@${ECHODIR} "===> lib/libpam (obj,depend,all,install)"; \
1111                 cd ${.CURDIR}/lib/libpam; \
1112                 ${MAKE} DIRPRFX=lib/libpam/ obj; \
1113                 ${MAKE} DIRPRFX=lib/libpam/ depend; \
1114                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
1115                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
1116
1117 _prereq_libs: ${_prereq_libs:S/$/__PL/}
1118 _startup_libs: ${_startup_libs:S/$/__L/}
1119 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1120 _generic_libs: ${_generic_libs:S/$/__L/}
1121
1122 .for __target in all clean cleandepend cleandir depend includes obj
1123 .for entry in ${SUBDIR}
1124 ${entry}.${__target}__D: .PHONY
1125         ${_+_}@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1126                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH} (${__target})"; \
1127                 edir=${entry}.${MACHINE_ARCH}; \
1128                 cd ${.CURDIR}/$${edir}; \
1129         else \
1130                 ${ECHODIR} "===> ${DIRPRFX}${entry} (${__target})"; \
1131                 edir=${entry}; \
1132                 cd ${.CURDIR}/$${edir}; \
1133         fi; \
1134         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1135 .endfor
1136 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1137 .endfor
1138
1139 .include <bsd.subdir.mk>
1140
1141 .if make(check-old) || make(check-old-dirs) || \
1142     make(check-old-files) || make(check-old-libs) || \
1143     make(delete-old) || make(delete-old-dirs) || \
1144     make(delete-old-files) || make(delete-old-libs)
1145
1146 #
1147 # check for / delete old files section
1148 #
1149
1150 .include "ObsoleteFiles.inc"
1151
1152 OLD_LIBS_MESSAGE="Please be sure no application still uses those libraries, \
1153 else you can not start such an application. Consult UPDATING for more \
1154 information regarding how to cope with the removal/revision bump of a \
1155 specific library."
1156
1157 .if !defined(BATCH_DELETE_OLD_FILES)
1158 RM_I=-i
1159 .else
1160 RM_I=-v
1161 .endif
1162
1163 delete-old-files:
1164         @echo ">>> Removing old files (only deletes safe to delete libs)"
1165 # Ask for every old file if the user really wants to remove it.
1166 # It's annoying, but better safe than sorry.
1167         @for file in ${OLD_FILES}; do \
1168                 if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
1169                         chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \
1170                         rm ${RM_I} "${DESTDIR}/$${file}"; \
1171                 fi; \
1172         done
1173 # Remove catpages without corresponding manpages.
1174         @3<&0; \
1175         find ${DESTDIR}/usr/share/man/cat* ! -type d | \
1176         sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \
1177         while read catpage; do \
1178                 read manpage; \
1179                 if [ ! -e "$${manpage}" ]; then \
1180                         rm ${RM_I} $${catpage} <&3 ; \
1181                 fi; \
1182         done
1183         @echo ">>> Old files removed"
1184
1185 check-old-files:
1186         @echo ">>> Checking for old files"
1187         @for file in ${OLD_FILES}; do \
1188                 if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
1189                         echo "${DESTDIR}/$${file}"; \
1190                 fi; \
1191         done
1192 # Check for catpages without corresponding manpages.
1193         @find ${DESTDIR}/usr/share/man/cat* ! -type d | \
1194         sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \
1195         while read catpage; do \
1196                 read manpage; \
1197                 if [ ! -e "$${manpage}" ]; then \
1198                         echo $${catpage} ; \
1199                 fi; \
1200         done
1201
1202 delete-old-libs:
1203         @echo ">>> Removing old libraries"
1204         @echo "${OLD_LIBS_MESSAGE}" | fmt
1205         @for file in ${OLD_LIBS}; do \
1206                 if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
1207                         chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \
1208                         rm ${RM_I} "${DESTDIR}/$${file}"; \
1209                 fi; \
1210         done
1211         @echo ">>> Old libraries removed"
1212
1213 check-old-libs:
1214         @echo ">>> Checking for old libraries"
1215         @for file in ${OLD_LIBS}; do \
1216                 if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
1217                         echo "${DESTDIR}/$${file}"; \
1218                 fi; \
1219         done
1220
1221 delete-old-dirs:
1222         @echo ">>> Removing old directories"
1223         @for dir in ${OLD_DIRS}; do \
1224                 if [ -d "${DESTDIR}/$${dir}" ]; then \
1225                         rmdir -v "${DESTDIR}/$${dir}" || true; \
1226                 elif [ -L "${DESTDIR}/$${dir}" ]; then \
1227                         echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \
1228                 fi; \
1229         done
1230         @echo ">>> Old directories removed"
1231
1232 check-old-dirs:
1233         @echo ">>> Checking for old directories"
1234         @for dir in ${OLD_DIRS}; do \
1235                 if [ -d "${DESTDIR}/$${dir}" ]; then \
1236                         echo "${DESTDIR}/$${dir}"; \
1237                 elif [ -L "${DESTDIR}/$${dir}" ]; then \
1238                         echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \
1239                 fi; \
1240         done
1241
1242 delete-old: delete-old-files delete-old-dirs
1243         @echo "To remove old libraries run '${MAKE} delete-old-libs'."
1244
1245 check-old: check-old-files check-old-libs check-old-dirs
1246         @echo "To remove old files and directories run '${MAKE} delete-old'."
1247         @echo "To remove old libraries run '${MAKE} delete-old-libs'."
1248
1249 .endif
1250
1251 #
1252 # showconfig - show build configuration.
1253 #
1254 showconfig:
1255         @${MAKE} -n -f bsd.own.mk -V dummy -dg1 | grep ^MK_ | sort