4 # Make command line options:
5 # -DMAKE_KERBEROS4 to build KerberosIV
6 # -DMAKE_KERBEROS5 to build Kerberos5
7 # -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8 # -DNOCLEAN do not clean at all
9 # -DNOCRYPT will prevent building of crypt versions
10 # -DNOPROFILE do not build profiled libraries
11 # -DNOSECURE do not go into secure subdir
12 # -DNOGAMES do not go into games subdir
13 # -DNOSHARE do not go into share subdir
14 # -DNOINFO do not make or install info files
15 # -DNOLIBC_R do not build libc_r.
16 # -DNO_FORTRAN do not build g77 and related libraries.
17 # -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18 # -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
19 # -DNO_PORTSUPDATE do not update ports in ${MAKE} update
20 # -DNO_DOCUPDATE do not update doc in ${MAKE} update
21 # LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
24 # The intended user-driven targets are:
25 # buildworld - rebuild *everything*, including glue to help do upgrades
26 # installworld- install everything built by "buildworld"
27 # update - convenient way to update your source tree (eg: sup/cvs)
28 # most - build user commands, no libraries or include files
29 # installmost - install user commands, no libraries or include files
31 # Standard targets (not defined here) are documented in the makefiles in
32 # /usr/share/mk. These include:
33 # obj depend all install clean cleandepend cleanobj
35 # Put initial settings here.
38 # We must do share/info early so that installation of info `dir'
39 # entries works correctly. Do it first since it is less likely to
40 # grow dependencies on include and lib than vice versa.
41 .if exists(${.CURDIR}/share/info)
45 # We must do include and lib early so that the perl *.ph generation
46 # works correctly as it uses the header files installed by this.
47 .if exists(${.CURDIR}/include)
50 .if exists(${.CURDIR}/lib)
54 .if exists(${.CURDIR}/bin)
57 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
60 .if exists(${.CURDIR}/gnu)
63 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
67 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
68 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
71 .if exists(${.CURDIR}/libexec)
74 .if exists(${.CURDIR}/sbin)
77 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
80 .if exists(${.CURDIR}/sys)
83 .if exists(${.CURDIR}/usr.bin)
86 .if exists(${.CURDIR}/usr.sbin)
89 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
93 # etc must be last for "distribute" to work
94 .if exists(${.CURDIR}/etc)
98 # These are last, since it is nice to at least get the base system
99 # rebuilt before you do them.
100 .if defined(LOCAL_DIRS)
101 .for _DIR in ${LOCAL_DIRS}
102 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
108 .if defined(NOCLEANDIR)
109 CLEANDIR= clean cleandepend
115 SUPFLAGS?= -g -L 2 -P -
117 SUPFLAGS+= -h ${SUPHOST}
120 MAKEOBJDIRPREFIX?= /usr/obj
121 TARGET_ARCH?= ${MACHINE_ARCH}
122 BUILD_ARCH!= sysctl -n hw.machine_arch
123 .if ${BUILD_ARCH} == ${MACHINE_ARCH}
124 OBJTREE= ${MAKEOBJDIRPREFIX}
126 OBJTREE= ${MAKEOBJDIRPREFIX}/${MACHINE_ARCH}
128 WORLDTMP= ${OBJTREE}${.CURDIR}/${BUILD_ARCH}
129 # /usr/games added for fortune which depend on strfile
130 STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
131 TMPPATH= ${STRICTTMPPATH}:${PATH}
135 INSTALLTMP= ${TMPDIR}/install.${TMPPID}
138 # Building a world goes through the following stages
140 # 1. bootstrap-tool stage [BMAKE]
141 # This stage is responsible for creating programs that
142 # are needed for backward compatibility reasons. They
143 # are not built as cross-tools.
144 # 2. build-tool stage [TMAKE]
145 # This stage is responsible for creating the object
146 # tree and building any tools that are needed during
148 # 3. cross-tool stage [XMAKE]
149 # This stage is responsible for creating any tools that
150 # are needed for cross-builds. A cross-compiler is one
152 # 4. world stage [WMAKE]
153 # This stage actually builds the world.
154 # 5. install stage (optional) [IMAKE]
155 # This stage installs a previously built world.
158 # Common environment for bootstrap related stages
159 BOOTSTRAPENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
160 DESTDIR=${WORLDTMP} \
161 INSTALL="sh ${.CURDIR}/tools/install.sh" \
162 MACHINE_ARCH=${BUILD_ARCH} \
163 TOOLS_PREFIX=${WORLDTMP} \
166 # Common environment for world related stages
167 CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
168 COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
169 LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib \
170 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
171 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0
173 # bootstrap-tool stage
174 BMAKEENV= ${BOOTSTRAPENV}
175 BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DNOHTML -DNOINFO \
176 -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED
179 TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
180 INSTALL="sh ${.CURDIR}/tools/install.sh" \
182 TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1
185 XMAKEENV= ${BOOTSTRAPENV} \
186 TARGET_ARCH=${MACHINE_ARCH}
187 XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
188 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE \
192 WMAKEENV= ${CROSSENV} \
193 DESTDIR=${WORLDTMP} \
194 INSTALL="sh ${.CURDIR}/tools/install.sh" \
196 WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
199 IMAKEENV= ${CROSSENV} \
200 PATH=${STRICTTMPPATH}:${INSTALLTMP}
201 IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
203 USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
204 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc
206 .if ${MACHINE_ARCH} == "i386" && ${MACHINE} == "pc98"
207 USRDIRS+= usr/libexec/aout
210 INCDIRS= arpa g++/std objc protocols readline rpc rpcsvc openssl \
216 # Attempt to rebuild the entire system, with reasonable chance of
217 # success, regardless of how old your existing system is.
221 @echo "--------------------------------------------------------------"
222 @echo ">>> Rebuilding the temporary build tree"
223 @echo "--------------------------------------------------------------"
224 .if !defined(NOCLEAN)
227 for dir in bin games include lib sbin; do \
228 rm -rf ${WORLDTMP}/usr/$$dir; \
230 rm -f ${WORLDTMP}/sys
231 # XXX - Work-around for broken cc/cc_tools/Makefile.
232 # This is beyond dirty...
233 rm -f ${OBJTREE}${.CURDIR}/gnu/usr.bin/cc/cc_tools/.depend
235 .for _dir in ${USRDIRS}
236 mkdir -p ${WORLDTMP}/${_dir}
238 .for _dir in ${INCDIRS}
239 mkdir -p ${WORLDTMP}/usr/include/${_dir}
241 ln -sf ${.CURDIR}/sys ${WORLDTMP}/sys
243 @echo "--------------------------------------------------------------"
244 @echo ">>> stage 1: bootstrap tools"
245 @echo "--------------------------------------------------------------"
246 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
247 .if !defined(NOCLEAN)
249 @echo "--------------------------------------------------------------"
250 @echo ">>> stage 2: cleaning up the object tree"
251 @echo "--------------------------------------------------------------"
252 cd ${.CURDIR}; ${TMAKE} ${CLEANDIR:S/^/par-/}
255 @echo "--------------------------------------------------------------"
256 @echo ">>> stage 2: rebuilding the object tree"
257 @echo "--------------------------------------------------------------"
258 cd ${.CURDIR}; ${TMAKE} par-obj
260 @echo "--------------------------------------------------------------"
261 @echo ">>> stage 2: build tools"
262 @echo "--------------------------------------------------------------"
263 cd ${.CURDIR}; ${TMAKE} build-tools
265 @echo "--------------------------------------------------------------"
266 @echo ">>> stage 3: cross tools"
267 @echo "--------------------------------------------------------------"
268 cd ${.CURDIR}; ${XMAKE} cross-tools
270 @echo "--------------------------------------------------------------"
271 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
272 @echo "--------------------------------------------------------------"
273 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks includes
275 @echo "--------------------------------------------------------------"
276 @echo ">>> stage 4: building libraries"
277 @echo "--------------------------------------------------------------"
278 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
280 @echo "--------------------------------------------------------------"
281 @echo ">>> stage 4: make dependencies"
282 @echo "--------------------------------------------------------------"
283 cd ${.CURDIR}; ${WMAKE} par-depend
285 @echo "--------------------------------------------------------------"
286 @echo ">>> stage 4: building everything.."
287 @echo "--------------------------------------------------------------"
288 cd ${.CURDIR}; ${WMAKE} all
291 @echo "--------------------------------------------------------------"
292 @echo ">>> Building everything.."
293 @echo "--------------------------------------------------------------"
294 cd ${.CURDIR}; ${WMAKE} all
299 # Installs everything compiled by a 'buildworld'.
302 mkdir -p ${INSTALLTMP}
303 for prog in [ awk cat chflags chmod chown date echo egrep find grep \
304 install ln make makewhatis mtree mv perl rm sed sh sysctl \
305 test true uname wc zic; do \
306 cp `which $$prog` ${INSTALLTMP}; \
308 cd ${.CURDIR}; ${IMAKE} reinstall
314 # If you have a build server, you can NFS mount the source and obj directories
315 # and do a 'make reinstall' on the *client* to install new binaries from the
316 # most recent server build.
319 @echo "--------------------------------------------------------------"
320 @echo ">>> Making hierarchy"
321 @echo "--------------------------------------------------------------"
322 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
324 @echo "--------------------------------------------------------------"
325 @echo ">>> Installing everything.."
326 @echo "--------------------------------------------------------------"
327 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
330 @echo "--------------------------------------------------------------"
331 @echo ">>> Rebuilding man page indices"
332 @echo "--------------------------------------------------------------"
333 cd ${.CURDIR}/share/man; ${MAKE} makedb
339 # Front-end to distribute to make sure the search path contains
340 # the object directory. Needed for miniperl.
343 cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
346 # buildkernel and installkernel
348 # Which kernels to build and/or install is specified by setting
349 # KERNEL. If not defined a GENERIC kernel is built/installed.
350 # Only the existing (depending MACHINE) config files are used
351 # for building kernels and only the first of these is designated
352 # as the one being installed.
354 # Note that we have to use MACHINE instead of MACHINE_ARCH when
355 # we're in kernel-land. Since only MACHINE_ARCH is (expected) to
356 # be set to cross-build, we have to make sure MACHINE is set
360 INSTKERNNAME?= kernel
362 # The only exotic MACHINE_ARCH/MACHINE combination valid at this
363 # time is i386/pc98. In all other cases set MACHINE equal to
365 .if ${MACHINE_ARCH} != "i386" || ${MACHINE} != "pc98"
366 MACHINE= ${MACHINE_ARCH}
369 KRNLSRCDIR= ${.CURDIR}/sys
370 KRNLCONFDIR= ${KRNLSRCDIR}/${MACHINE}/conf
371 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
373 .if !defined(NOCLEAN)
379 .for _kernel in ${KERNEL}
380 .if exists(${KRNLCONFDIR}/${_kernel})
381 BUILDKERNELS+= ${_kernel}
382 .if empty(INSTALLKERNEL)
383 INSTALLKERNEL= ${_kernel}
391 # Builds all kernels defined by BUILDKERNELS.
394 .if empty(BUILDKERNELS)
395 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNEL})."
399 @echo "--------------------------------------------------------------"
400 @echo ">>> Rebuilding kernel(s)"
401 @echo "--------------------------------------------------------------"
402 .for _kernel in ${BUILDKERNELS}
403 @echo "===> ${_kernel}"
404 mkdir -p ${KRNLOBJDIR}
405 .if !defined(NO_KERNELCONFIG)
408 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} ${_kernel}
410 cd ${KRNLOBJDIR}/${_kernel}; \
411 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
412 ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
413 .if !defined(NO_KERNELDEPEND)
414 cd ${KRNLOBJDIR}/${_kernel}; \
415 ${WMAKEENV} MACHINE=${MACHINE} ${MAKE} KERNEL=${INSTKERNNAME} depend
417 cd ${KRNLOBJDIR}/${_kernel}; \
418 ${WMAKEENV} MACHINE=${MACHINE} ${MAKE} KERNEL=${INSTKERNNAME} all
424 # Install the kernel defined by INSTALLKERNEL
427 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
428 ${CROSSENV} MACHINE=${MACHINE} ${MAKE} KERNEL=${INSTKERNNAME} install
430 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
431 ${CROSSENV} MACHINE=${MACHINE} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
436 # Short hand for `make buildkernel installkernel'
438 kernel: buildkernel installkernel
443 # Update the source tree, by running sup and/or running cvs to update to the
447 .if defined(SUP_UPDATE)
448 @echo "--------------------------------------------------------------"
449 @echo ">>> Running ${SUP}"
450 @echo "--------------------------------------------------------------"
452 @${SUP} ${SUPFLAGS} ${SUPFILE}
454 .if defined(SUPFILE1)
455 @${SUP} ${SUPFLAGS} ${SUPFILE1}
457 .if defined(SUPFILE2)
458 @${SUP} ${SUPFLAGS} ${SUPFILE2}
460 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
461 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
463 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
464 @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
467 .if defined(CVS_UPDATE)
468 @echo "--------------------------------------------------------------"
469 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
470 @echo "--------------------------------------------------------------"
471 cd ${.CURDIR}; cvs -q update -A -P -d
477 # Build most of the user binaries on the existing system libs and includes.
480 @echo "--------------------------------------------------------------"
481 @echo ">>> Building programs only"
482 @echo "--------------------------------------------------------------"
483 cd ${.CURDIR}/bin; ${MAKE} all
484 cd ${.CURDIR}/sbin; ${MAKE} all
485 cd ${.CURDIR}/libexec; ${MAKE} all
486 cd ${.CURDIR}/usr.bin; ${MAKE} all
487 cd ${.CURDIR}/usr.sbin; ${MAKE} all
488 cd ${.CURDIR}/gnu/libexec; ${MAKE} all
489 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} all
490 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} all
495 # Install the binaries built by the 'most' target. This does not include
496 # libraries or include files.
499 @echo "--------------------------------------------------------------"
500 @echo ">>> Installing programs only"
501 @echo "--------------------------------------------------------------"
502 cd ${.CURDIR}/bin; ${MAKE} install
503 cd ${.CURDIR}/sbin; ${MAKE} install
504 cd ${.CURDIR}/libexec; ${MAKE} install
505 cd ${.CURDIR}/usr.bin; ${MAKE} install
506 cd ${.CURDIR}/usr.sbin; ${MAKE} install
507 cd ${.CURDIR}/gnu/libexec; ${MAKE} install
508 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} install
509 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} install
512 # ------------------------------------------------------------------------
514 # From here onwards are utility targets used by the 'make world' and
515 # related targets. If your 'world' breaks, you may like to try to fix
516 # the problem and manually run the following targets to attempt to
517 # complete the build. Beware, this is *not* guaranteed to work, you
518 # need to have a pretty good grip on the current state of the system
519 # to attempt to manually finish it. If in doubt, 'make world' again.
523 # bootstrap-tools: Build tools needed for compatibility
525 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
526 _strfile= games/fortune/strfile
530 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.sbin/config \
531 gnu/usr.bin/gperf gnu/usr.bin/texinfo
532 cd ${.CURDIR}/${_tool}; \
540 # build-tools: Build special purpose build tools
542 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
543 _games= games/adventure games/hack games/phantasia
546 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
547 _share= share/syscons/scrnmaps
550 .if !defined(NO_FORTRAN)
551 _fortran= gnu/usr.bin/cc/f771
554 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
555 !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
556 _libroken4= kerberosIV/lib/libroken
559 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
560 !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
561 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libasn1 kerberos5/lib/libhdb \
566 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
567 ${_libroken4} ${_libkrb5} lib/libncurses ${_share}
568 cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
572 # cross-tools: Build cross-building tools
574 # WARNING: Because the bootstrap tools are expected to run on the
575 # build-machine, MACHINE_ARCH is *always* set to BUILD_ARCH when this
576 # target is being made. TARGET_ARCH is *always* set to reflect the
577 # target-machine (which you can set by specifying MACHINE_ARCH on
578 # make's command-line, get it?).
579 # The reason is simple: we build these tools not to be run on the
580 # architecture we're cross-building, but on the architecture we're
581 # currently building on (ie the host-machine) and we expect these
582 # tools to produce output for the architecture we're trying to
585 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
586 _elf2exe= usr.sbin/elf2exe
589 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
590 _btxld= usr.sbin/btxld
593 # XXX - MACHINE should actually be TARGET. But we don't set that...
594 .if ${TARGET_ARCH} == "i386" && ${MACHINE} == "pc98"
595 _aout_tools= usr.bin/size usr.bin/strip gnu/usr.bin/as gnu/usr.bin/ld
599 _perl= gnu/usr.bin/perl/libperl gnu/usr.bin/perl/miniperl
603 .for _tool in ${_aout_tools} ${_btxld} ${_elf2exe} ${_perl} usr.bin/genassym \
604 usr.bin/gensetdefs gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
605 cd ${.CURDIR}/${_tool}; \
613 # hierarchy - ensure that all the needed directories are present
616 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
619 # includes - possibly generate and install the include files.
622 cd ${.CURDIR}/include; ${MAKE} -B all install
623 cd ${.CURDIR}/gnu/include; ${MAKE} install
624 cd ${.CURDIR}/gnu/lib/libmp; ${MAKE} beforeinstall
625 cd ${.CURDIR}/gnu/lib/libobjc; ${MAKE} beforeinstall
626 cd ${.CURDIR}/gnu/lib/libreadline/readline; ${MAKE} beforeinstall
627 cd ${.CURDIR}/gnu/lib/libregex; ${MAKE} beforeinstall
628 cd ${.CURDIR}/gnu/lib/libstdc++; ${MAKE} beforeinstall
629 cd ${.CURDIR}/gnu/lib/libdialog; ${MAKE} beforeinstall
630 cd ${.CURDIR}/gnu/lib/libgmp; ${MAKE} beforeinstall
631 cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus; ${MAKE} beforeinstall
632 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
633 .if exists(${.CURDIR}/secure/lib/libcrypto)
634 cd ${.CURDIR}/secure/lib/libcrypto; ${MAKE} beforeinstall
636 .if exists(${.CURDIR}/secure/lib/libssl)
637 cd ${.CURDIR}/secure/lib/libssl; ${MAKE} beforeinstall
640 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
641 defined(MAKE_KERBEROS4)
642 cd ${.CURDIR}/kerberosIV/lib/libacl; ${MAKE} beforeinstall
643 cd ${.CURDIR}/kerberosIV/lib/libkadm; ${MAKE} beforeinstall
644 cd ${.CURDIR}/kerberosIV/lib/libkafs; ${MAKE} beforeinstall
645 cd ${.CURDIR}/kerberosIV/lib/libkdb; ${MAKE} beforeinstall
646 cd ${.CURDIR}/kerberosIV/lib/libkrb; ${MAKE} beforeinstall
647 cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
649 cd ${.CURDIR}/lib/libtelnet; ${MAKE} beforeinstall
651 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
652 defined(MAKE_KERBEROS5)
653 cd ${.CURDIR}/kerberos5/lib/libasn1; ${MAKE} beforeinstall
654 cd ${.CURDIR}/kerberos5/lib/libhdb; ${MAKE} beforeinstall
655 cd ${.CURDIR}/kerberos5/lib/libkadm5clnt; ${MAKE} beforeinstall
656 cd ${.CURDIR}/kerberos5/lib/libkadm5srv; ${MAKE} beforeinstall
657 cd ${.CURDIR}/kerberos5/lib/libkafs5; ${MAKE} beforeinstall
658 cd ${.CURDIR}/kerberos5/lib/libkrb5; ${MAKE} beforeinstall
659 cd ${.CURDIR}/kerberos5/lib/libsl; ${MAKE} beforeinstall
661 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
662 cd ${.CURDIR}/lib/csu/${MACHINE_ARCH}; ${MAKE} beforeinstall
664 cd ${.CURDIR}/gnu/lib/csu; ${MAKE} beforeinstall
665 cd ${.CURDIR}/lib/libalias; ${MAKE} beforeinstall
666 cd ${.CURDIR}/lib/libatm; ${MAKE} beforeinstall
667 cd ${.CURDIR}/lib/libdevstat; ${MAKE} beforeinstall
668 cd ${.CURDIR}/lib/libc; ${MAKE} beforeinstall
669 cd ${.CURDIR}/lib/libcalendar; ${MAKE} beforeinstall
670 cd ${.CURDIR}/lib/libcam; ${MAKE} beforeinstall
671 cd ${.CURDIR}/lib/libdisk; ${MAKE} beforeinstall
672 cd ${.CURDIR}/lib/libedit; ${MAKE} beforeinstall
673 cd ${.CURDIR}/lib/libfetch; ${MAKE} beforeinstall
674 cd ${.CURDIR}/lib/libftpio; ${MAKE} beforeinstall
675 cd ${.CURDIR}/lib/libkvm; ${MAKE} beforeinstall
676 cd ${.CURDIR}/lib/libmd; ${MAKE} beforeinstall
677 .if !defined(WANT_CSRG_LIBM)
678 cd ${.CURDIR}/lib/msun; ${MAKE} beforeinstall
680 cd ${.CURDIR}/lib/libncp; ${MAKE} beforeinstall
681 cd ${.CURDIR}/lib/libncurses; ${MAKE} beforeinstall
682 cd ${.CURDIR}/lib/libnetgraph; ${MAKE} beforeinstall
683 cd ${.CURDIR}/lib/libopie; ${MAKE} beforeinstall
684 cd ${.CURDIR}/lib/libpam/libpam; ${MAKE} beforeinstall
685 cd ${.CURDIR}/lib/libpcap; ${MAKE} beforeinstall
686 cd ${.CURDIR}/lib/libradius; ${MAKE} beforeinstall
687 cd ${.CURDIR}/lib/librpcsvc; ${MAKE} beforeinstall
688 cd ${.CURDIR}/lib/libskey; ${MAKE} beforeinstall
689 cd ${.CURDIR}/lib/libstand; ${MAKE} beforeinstall
690 cd ${.CURDIR}/lib/libtacplus; ${MAKE} beforeinstall
691 cd ${.CURDIR}/lib/libcom_err; ${MAKE} beforeinstall
692 cd ${.CURDIR}/lib/libss; ${MAKE} -B hdrs beforeinstall
693 cd ${.CURDIR}/lib/libutil; ${MAKE} beforeinstall
694 cd ${.CURDIR}/lib/libvgl; ${MAKE} beforeinstall
695 cd ${.CURDIR}/lib/libwrap; ${MAKE} beforeinstall
696 cd ${.CURDIR}/lib/libz; ${MAKE} beforeinstall
697 cd ${.CURDIR}/usr.bin/lex; ${MAKE} beforeinstall
700 # libraries - build all libraries, and install them under ${DESTDIR}.
702 # The following dependencies exist between the libraries:
704 # lib*: csu libgcc_pic
707 # libdialog: libncurses
708 # libedit: libncurses
712 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
713 # libskey libtacplus libutil libz libssh
715 # libreadline: libncurses
716 # libskey: libcrypt libmd
721 # Across directories this comes down to (rougly):
723 # gnu/lib: lib/libm lib/libncurses
724 # kerberosIV/lib kerberos5/lib: lib/libcrypt
725 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
726 # secure/lib/libssh lib/libz
727 # secure/lib: lib/libmd
729 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
730 _csu= lib/csu/${MACHINE_ARCH}.pcc
731 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
732 _csu= lib/csu/i386-elf
734 _csu= lib/csu/${MACHINE_ARCH}
737 .if !defined(NOSECURE) && !defined(NOCRYPT)
738 _secure_lib= secure/lib
741 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
742 _kerberosIV_lib= kerberosIV/lib
745 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
746 _kerberos5_lib= kerberos5/lib
749 .if defined(WANT_CSRG_LIBM)
755 .if ${MACHINE_ARCH} == "i386"
756 _libkeycap= usr.sbin/pcvt/keycap
760 _libperl= gnu/usr.bin/perl/libperl
764 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
765 ${_secure_lib} ${_kerberosIV_lib} \
766 ${_kerberos5_lib} lib/libcom_err ${_libm} lib/libncurses \
767 lib/libopie lib/libradius lib/libskey lib/libtacplus lib/libutil \
768 lib/libz lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
769 .if exists(${.CURDIR}/${_lib})
770 cd ${.CURDIR}/${_lib}; \
777 .for __target in clean cleandepend cleandir depend obj
778 .for entry in ${SUBDIR}
779 ${entry}.${__target}__D: .PHONY
780 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
781 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
782 edir=${entry}.${MACHINE_ARCH}; \
783 cd ${.CURDIR}/$${edir}; \
785 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
787 cd ${.CURDIR}/$${edir}; \
789 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
791 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
794 .include <bsd.subdir.mk>