4 # Make command line options:
5 # -DMAKE_KERBEROS4 to build KerberosIV
6 # -DMAKE_KERBEROS5 to build Kerberos5
7 # -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8 # -DNOCLEAN do not clean at all
9 # -DNOCRYPT will prevent building of crypt versions
10 # -DNOPROFILE do not build profiled libraries
11 # -DNOSECURE do not go into secure subdir
12 # -DNOGAMES do not go into games subdir
13 # -DNOSHARE do not go into share subdir
14 # -DNOINFO do not make or install info files
15 # -DNOLIBC_R do not build libc_r.
16 # -DNO_FORTRAN do not build g77 and related libraries.
17 # -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18 # -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19 # -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20 # -DNO_PORTSUPDATE do not update ports in ${MAKE} update
21 # -DNO_DOCUPDATE do not update doc in ${MAKE} update
22 # LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23 # TARGET_ARCH="arch" to crossbuild world to a different arch
26 # The intended user-driven targets are:
27 # buildworld - rebuild *everything*, including glue to help do upgrades
28 # installworld- install everything built by "buildworld"
29 # update - convenient way to update your source tree (eg: sup/cvs)
30 # most - build user commands, no libraries or include files
31 # installmost - install user commands, no libraries or include files
33 # Standard targets (not defined here) are documented in the makefiles in
34 # /usr/share/mk. These include:
35 # obj depend all install clean cleandepend cleanobj
37 # Put initial settings here.
40 # We must do share/info early so that installation of info `dir'
41 # entries works correctly. Do it first since it is less likely to
42 # grow dependencies on include and lib than vice versa.
43 .if exists(${.CURDIR}/share/info)
47 # We must do include and lib early so that the perl *.ph generation
48 # works correctly as it uses the header files installed by this.
49 .if exists(${.CURDIR}/include)
52 .if exists(${.CURDIR}/lib)
56 .if exists(${.CURDIR}/bin)
59 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
62 .if exists(${.CURDIR}/gnu)
65 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
66 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
69 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
70 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
73 .if exists(${.CURDIR}/libexec)
76 .if exists(${.CURDIR}/sbin)
79 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
82 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
85 .if exists(${.CURDIR}/sys)
88 .if exists(${.CURDIR}/usr.bin)
91 .if exists(${.CURDIR}/usr.sbin)
95 # etc must be last for "distribute" to work
96 .if exists(${.CURDIR}/etc)
100 # These are last, since it is nice to at least get the base system
101 # rebuilt before you do them.
102 .if defined(LOCAL_DIRS)
103 .for _DIR in ${LOCAL_DIRS}
104 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
110 .if defined(NOCLEANDIR)
111 CLEANDIR= clean cleandepend
117 SUP?= /usr/local/bin/cvsup
118 SUPFLAGS?= -g -L 2 -P -
120 SUPFLAGS+= -h ${SUPHOST}
123 MAKEOBJDIRPREFIX?= /usr/obj
124 TARGET_ARCH?= ${MACHINE_ARCH}
127 BUILD_ARCH!= sysctl -n hw.machine_arch
128 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
129 .error To cross-build, set TARGET_ARCH.
132 .if ${MACHINE_ARCH} == ${TARGET_ARCH}
133 OBJTREE= ${MAKEOBJDIRPREFIX}
135 OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET_ARCH}
137 WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
138 # /usr/games added for fortune which depend on strfile
139 STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
140 TMPPATH= ${STRICTTMPPATH}:${PATH}
141 OBJFORMAT_PATH?= /usr/libexec
143 INSTALLTMP!= /usr/bin/mktemp -d -u -t install
146 # Building a world goes through the following stages
148 # 1. bootstrap-tool stage [BMAKE]
149 # This stage is responsible for creating programs that
150 # are needed for backward compatibility reasons. They
151 # are not built as cross-tools.
152 # 2. build-tool stage [TMAKE]
153 # This stage is responsible for creating the object
154 # tree and building any tools that are needed during
156 # 3. cross-tool stage [XMAKE]
157 # This stage is responsible for creating any tools that
158 # are needed for cross-builds. A cross-compiler is one
160 # 4. world stage [WMAKE]
161 # This stage actually builds the world.
162 # 5. install stage (optional) [IMAKE]
163 # This stage installs a previously built world.
166 # Common environment for world related stages
167 CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
168 MACHINE_ARCH=${TARGET_ARCH} \
170 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
171 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0 \
172 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
173 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
174 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
176 # bootstrap-tool stage
177 BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
179 INSTALL="sh ${.CURDIR}/tools/install.sh"
180 BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
181 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
185 TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
187 INSTALL="sh ${.CURDIR}/tools/install.sh"
188 TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
191 XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
194 WMAKEENV= ${CROSSENV} \
195 DESTDIR=${WORLDTMP} \
196 INSTALL="sh ${.CURDIR}/tools/install.sh" \
198 WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
201 IMAKEENV= ${CROSSENV} \
202 PATH=${STRICTTMPPATH}:${INSTALLTMP}
203 IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
206 KMAKEENV= ${WMAKEENV} \
207 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
209 USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
210 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
212 usr/share/groff_font/devX100 \
213 usr/share/groff_font/devX100-12 \
214 usr/share/groff_font/devX75 \
215 usr/share/groff_font/devX75-12 \
216 usr/share/groff_font/devascii \
217 usr/share/groff_font/devcp1047 \
218 usr/share/groff_font/devdvi \
219 usr/share/groff_font/devhtml \
220 usr/share/groff_font/devkoi8-r \
221 usr/share/groff_font/devlatin1 \
222 usr/share/groff_font/devlbp \
223 usr/share/groff_font/devlj4 \
224 usr/share/groff_font/devps \
225 usr/share/groff_font/devutf8 \
226 usr/share/tmac/mdoc usr/share/tmac/mm
228 INCDIRS= arpa g++/std isc objc protocols readline rpc rpcsvc openssl \
234 # Attempt to rebuild the entire system, with reasonable chance of
235 # success, regardless of how old your existing system is.
239 @echo "--------------------------------------------------------------"
240 @echo ">>> Rebuilding the temporary build tree"
241 @echo "--------------------------------------------------------------"
242 .if !defined(NOCLEAN)
245 .for _dir in ${USRDIRS}
246 mkdir -p ${WORLDTMP}/${_dir}
248 .for _dir in ${INCDIRS}
249 mkdir -p ${WORLDTMP}/usr/include/${_dir}
251 ln -sf ${.CURDIR}/sys ${WORLDTMP}
253 @echo "--------------------------------------------------------------"
254 @echo ">>> stage 1: bootstrap tools"
255 @echo "--------------------------------------------------------------"
256 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
257 .if !defined(NOCLEAN)
259 @echo "--------------------------------------------------------------"
260 @echo ">>> stage 2: cleaning up the object tree"
261 @echo "--------------------------------------------------------------"
262 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
265 @echo "--------------------------------------------------------------"
266 @echo ">>> stage 2: rebuilding the object tree"
267 @echo "--------------------------------------------------------------"
268 cd ${.CURDIR}; ${WMAKE} par-obj
270 @echo "--------------------------------------------------------------"
271 @echo ">>> stage 2: build tools"
272 @echo "--------------------------------------------------------------"
273 cd ${.CURDIR}; ${TMAKE} build-tools
275 @echo "--------------------------------------------------------------"
276 @echo ">>> stage 3: cross tools"
277 @echo "--------------------------------------------------------------"
278 cd ${.CURDIR}; ${XMAKE} cross-tools
280 @echo "--------------------------------------------------------------"
281 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
282 @echo "--------------------------------------------------------------"
283 cd ${.CURDIR}; ${WMAKE} SHARED=copies includes
285 @echo "--------------------------------------------------------------"
286 @echo ">>> stage 4: building libraries"
287 @echo "--------------------------------------------------------------"
288 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
290 @echo "--------------------------------------------------------------"
291 @echo ">>> stage 4: make dependencies"
292 @echo "--------------------------------------------------------------"
293 cd ${.CURDIR}; ${WMAKE} par-depend
295 @echo "--------------------------------------------------------------"
296 @echo ">>> stage 4: building everything.."
297 @echo "--------------------------------------------------------------"
298 cd ${.CURDIR}; ${WMAKE} all
301 @echo "--------------------------------------------------------------"
302 @echo ">>> Building everything.."
303 @echo "--------------------------------------------------------------"
304 cd ${.CURDIR}; ${WMAKE} all
309 # Installs everything compiled by a 'buildworld'.
312 mkdir -p ${INSTALLTMP}
313 for prog in [ awk cat chflags chmod chown date echo egrep find grep \
314 ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
315 test true uname wc zic; do \
316 cp `which $$prog` ${INSTALLTMP}; \
318 cd ${.CURDIR}; ${IMAKE} reinstall
324 # If you have a build server, you can NFS mount the source and obj directories
325 # and do a 'make reinstall' on the *client* to install new binaries from the
326 # most recent server build.
329 @echo "--------------------------------------------------------------"
330 @echo ">>> Making hierarchy"
331 @echo "--------------------------------------------------------------"
332 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
334 @echo "--------------------------------------------------------------"
335 @echo ">>> Installing everything.."
336 @echo "--------------------------------------------------------------"
337 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
340 @echo "--------------------------------------------------------------"
341 @echo ">>> Rebuilding man page indices"
342 @echo "--------------------------------------------------------------"
343 cd ${.CURDIR}/share/man; ${MAKE} makedb
349 # Front-end to distribute to make sure the search path contains
350 # the object directory. Needed for miniperl.
353 cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
356 # buildkernel and installkernel
358 # Which kernels to build and/or install is specified by setting
359 # KERNCONF. If not defined a GENERIC kernel is built/installed.
360 # Only the existing (depending TARGET) config files are used
361 # for building kernels and only the first of these is designated
362 # as the one being installed.
364 # Note that we have to use TARGET instead of TARGET_ARCH when
365 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
366 # be set to cross-build, we have to make sure TARGET is set
369 .if !defined(KERNCONF) && defined(KERNEL)
375 INSTKERNNAME?= kernel
377 # The only exotic TARGET_ARCH/TARGET combination valid at this
378 # time is i386/pc98. In all other cases set TARGET equal to
380 .if ${TARGET_ARCH} != "i386" || ${TARGET} != "pc98"
381 TARGET= ${TARGET_ARCH}
384 KRNLSRCDIR= ${.CURDIR}/sys
385 KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf
386 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
387 KERNCONFDIR?= ${KRNLCONFDIR}
391 .for _kernel in ${KERNCONF}
392 .if exists(${KERNCONFDIR}/${_kernel})
393 BUILDKERNELS+= ${_kernel}
394 .if empty(INSTALLKERNEL)
395 INSTALLKERNEL= ${_kernel}
403 # Builds all kernels defined by BUILDKERNELS.
406 .if empty(BUILDKERNELS)
407 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
410 .if defined(KERNWARN)
411 @echo "--------------------------------------------------------------"
412 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
413 @echo "--------------------------------------------------------------"
417 .for _kernel in ${BUILDKERNELS}
418 @echo "--------------------------------------------------------------"
419 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
420 @echo "--------------------------------------------------------------"
421 @echo "===> ${_kernel}"
422 mkdir -p ${KRNLOBJDIR}
423 .if !defined(NO_KERNELCONFIG)
426 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
427 ${KERNCONFDIR}/${_kernel}
429 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
430 .if defined(MODULES_WITH_WORLD) || defined(NO_MODULES) || !exists(${KRNLSRCDIR}/modules)
431 cd ${KRNLOBJDIR}/${_kernel}; \
432 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean
434 cd ${KRNLOBJDIR}/${_kernel}; \
435 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean cleandir
438 cd ${KRNLOBJDIR}/${_kernel}; \
439 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
440 ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
441 .if !defined(NO_KERNELDEPEND)
442 cd ${KRNLOBJDIR}/${_kernel}; \
443 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
445 cd ${KRNLOBJDIR}/${_kernel}; \
446 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
447 @echo "--------------------------------------------------------------"
448 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
449 @echo "--------------------------------------------------------------"
455 # Install the kernel defined by INSTALLKERNEL
458 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
459 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
461 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
462 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
467 # Short hand for `make buildkernel installkernel'
469 kernel: buildkernel installkernel
474 # Update the source tree, by running sup and/or running cvs to update to the
478 .if defined(SUP_UPDATE)
479 @echo "--------------------------------------------------------------"
480 @echo ">>> Running ${SUP}"
481 @echo "--------------------------------------------------------------"
483 @${SUP} ${SUPFLAGS} ${SUPFILE}
485 .if defined(SUPFILE1)
486 @${SUP} ${SUPFLAGS} ${SUPFILE1}
488 .if defined(SUPFILE2)
489 @${SUP} ${SUPFLAGS} ${SUPFILE2}
491 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
492 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
494 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
495 @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
498 .if defined(CVS_UPDATE)
499 @echo "--------------------------------------------------------------"
500 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
501 @echo "--------------------------------------------------------------"
502 cd ${.CURDIR}; ${CVS} -q update -A -P -d
508 # Build most of the user binaries on the existing system libs and includes.
511 @echo "--------------------------------------------------------------"
512 @echo ">>> Building programs only"
513 @echo "--------------------------------------------------------------"
514 cd ${.CURDIR}/bin; ${MAKE} all
515 cd ${.CURDIR}/sbin; ${MAKE} all
516 cd ${.CURDIR}/libexec; ${MAKE} all
517 cd ${.CURDIR}/usr.bin; ${MAKE} all
518 cd ${.CURDIR}/usr.sbin; ${MAKE} all
519 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} all
520 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} all
525 # Install the binaries built by the 'most' target. This does not include
526 # libraries or include files.
529 @echo "--------------------------------------------------------------"
530 @echo ">>> Installing programs only"
531 @echo "--------------------------------------------------------------"
532 cd ${.CURDIR}/bin; ${MAKE} install
533 cd ${.CURDIR}/sbin; ${MAKE} install
534 cd ${.CURDIR}/libexec; ${MAKE} install
535 cd ${.CURDIR}/usr.bin; ${MAKE} install
536 cd ${.CURDIR}/usr.sbin; ${MAKE} install
537 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} install
538 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} install
541 # ------------------------------------------------------------------------
543 # From here onwards are utility targets used by the 'make world' and
544 # related targets. If your 'world' breaks, you may like to try to fix
545 # the problem and manually run the following targets to attempt to
546 # complete the build. Beware, this is *not* guaranteed to work, you
547 # need to have a pretty good grip on the current state of the system
548 # to attempt to manually finish it. If in doubt, 'make world' again.
552 # bootstrap-tools: Build tools needed for compatibility
554 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
555 _strfile= games/fortune/strfile
559 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
560 usr.sbin/config usr.sbin/kbdcontrol \
561 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
562 cd ${.CURDIR}/${_tool}; \
566 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
570 # build-tools: Build special purpose build tools
572 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
573 _games= games/adventure games/hack games/phantasia
576 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
577 _share= share/syscons/scrnmaps
580 .if !defined(NO_FORTRAN)
581 _fortran= gnu/usr.bin/cc/f771
585 _perl= gnu/usr.bin/perl/miniperl
588 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
589 !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
590 _libroken4= kerberosIV/lib/libroken
593 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
594 !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
595 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
596 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
600 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
601 ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
602 usr.bin/file usr.sbin/sysinstall
603 cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
607 # cross-tools: Build cross-building tools
609 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
610 _elf2exe= usr.sbin/elf2exe
613 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
614 _btxld= usr.sbin/btxld
618 .for _tool in ${_btxld} ${_elf2exe} \
619 gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
620 cd ${.CURDIR}/${_tool}; \
624 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
628 # hierarchy - ensure that all the needed directories are present
631 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
634 # includes - possibly generate and install the include files.
637 cd ${.CURDIR}/include; ${MAKE} -B all install
638 cd ${.CURDIR}/gnu/include; ${MAKE} install
639 cd ${.CURDIR}/gnu/lib/libobjc; ${MAKE} beforeinstall
640 cd ${.CURDIR}/gnu/lib/libreadline/readline; ${MAKE} beforeinstall
641 cd ${.CURDIR}/gnu/lib/libregex; ${MAKE} beforeinstall
642 cd ${.CURDIR}/gnu/lib/libstdc++; ${MAKE} beforeinstall
643 cd ${.CURDIR}/gnu/lib/libdialog; ${MAKE} beforeinstall
644 cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus; ${MAKE} beforeinstall
645 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
646 .if exists(${.CURDIR}/secure/lib/libcrypto)
647 cd ${.CURDIR}/secure/lib/libcrypto; ${MAKE} beforeinstall
649 .if exists(${.CURDIR}/secure/lib/libssl)
650 cd ${.CURDIR}/secure/lib/libssl; ${MAKE} beforeinstall
653 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
654 defined(MAKE_KERBEROS4)
655 cd ${.CURDIR}/kerberosIV/lib/libacl; ${MAKE} beforeinstall
656 cd ${.CURDIR}/kerberosIV/lib/libkadm; ${MAKE} beforeinstall
657 cd ${.CURDIR}/kerberosIV/lib/libkafs; ${MAKE} beforeinstall
658 cd ${.CURDIR}/kerberosIV/lib/libkdb; ${MAKE} beforeinstall
659 cd ${.CURDIR}/kerberosIV/lib/libkrb; ${MAKE} beforeinstall
660 cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
661 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
662 cd ${.CURDIR}/secure/lib/libtelnet; ${MAKE} beforeinstall
664 cd ${.CURDIR}/lib/libtelnet; ${MAKE} beforeinstall
666 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
667 defined(MAKE_KERBEROS5)
668 cd ${.CURDIR}/kerberos5/lib/libasn1; ${MAKE} beforeinstall
669 cd ${.CURDIR}/kerberos5/lib/libhdb; ${MAKE} beforeinstall
670 cd ${.CURDIR}/kerberos5/lib/libkadm5clnt; ${MAKE} beforeinstall
671 cd ${.CURDIR}/kerberos5/lib/libkadm5srv; ${MAKE} beforeinstall
672 cd ${.CURDIR}/kerberos5/lib/libkafs5; ${MAKE} beforeinstall
673 cd ${.CURDIR}/kerberos5/lib/libkrb5; ${MAKE} beforeinstall
674 cd ${.CURDIR}/kerberos5/lib/libsl; ${MAKE} beforeinstall
676 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
677 cd ${.CURDIR}/lib/csu/${MACHINE_ARCH}; ${MAKE} beforeinstall
679 cd ${.CURDIR}/gnu/lib/csu; ${MAKE} beforeinstall
680 cd ${.CURDIR}/lib/libalias; ${MAKE} beforeinstall
681 cd ${.CURDIR}/lib/libatm; ${MAKE} beforeinstall
682 cd ${.CURDIR}/lib/libdevstat; ${MAKE} beforeinstall
683 cd ${.CURDIR}/lib/libc; ${MAKE} beforeinstall
684 cd ${.CURDIR}/lib/libcalendar; ${MAKE} beforeinstall
685 cd ${.CURDIR}/lib/libcam; ${MAKE} beforeinstall
686 cd ${.CURDIR}/lib/libdisk; ${MAKE} beforeinstall
687 cd ${.CURDIR}/lib/libedit; ${MAKE} beforeinstall
688 cd ${.CURDIR}/lib/libfetch; ${MAKE} beforeinstall
689 cd ${.CURDIR}/lib/libftpio; ${MAKE} beforeinstall
690 cd ${.CURDIR}/lib/libkvm; ${MAKE} beforeinstall
691 cd ${.CURDIR}/lib/libmd; ${MAKE} beforeinstall
692 cd ${.CURDIR}/lib/libmp; ${MAKE} beforeinstall
693 cd ${.CURDIR}/lib/msun; ${MAKE} beforeinstall
694 cd ${.CURDIR}/lib/libncp; ${MAKE} beforeinstall
695 cd ${.CURDIR}/lib/libncurses; ${MAKE} beforeinstall
696 cd ${.CURDIR}/lib/libnetgraph; ${MAKE} beforeinstall
697 cd ${.CURDIR}/lib/libopie; ${MAKE} beforeinstall
698 cd ${.CURDIR}/lib/libpcap; ${MAKE} beforeinstall
699 cd ${.CURDIR}/lib/libradius; ${MAKE} beforeinstall
700 cd ${.CURDIR}/lib/librpcsvc; ${MAKE} beforeinstall
701 cd ${.CURDIR}/lib/libpam/libpam; ${MAKE} beforeinstall
702 cd ${.CURDIR}/lib/libsbuf; ${MAKE} beforeinstall
703 cd ${.CURDIR}/lib/libstand; ${MAKE} beforeinstall
704 cd ${.CURDIR}/lib/libtacplus; ${MAKE} beforeinstall
705 cd ${.CURDIR}/lib/libcom_err; ${MAKE} beforeinstall
706 cd ${.CURDIR}/lib/libutil; ${MAKE} beforeinstall
707 cd ${.CURDIR}/lib/libvgl; ${MAKE} beforeinstall
708 cd ${.CURDIR}/lib/libwrap; ${MAKE} beforeinstall
709 cd ${.CURDIR}/lib/libz; ${MAKE} beforeinstall
710 cd ${.CURDIR}/usr.bin/lex; ${MAKE} beforeinstall
713 # libraries - build all libraries, and install them under ${DESTDIR}.
715 # The following dependencies exist between the libraries:
717 # lib*: csu libgcc_pic
722 # libdialog: libncurses
723 # libedit: libncurses
727 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
728 # librpcsvc libtacplus libutil libz libssh
730 # libreadline: libncurses
731 # libssh: libcrypto libz
735 # Across directories this comes down to (rougly):
737 # gnu/lib: lib/msun lib/libncurses
738 # kerberosIV/lib kerberos5/lib: lib/libcrypt
739 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
740 # secure/lib/libssh lib/libz
741 # secure/lib: secure/lib/libcrypto lib/libmd lib/libz
743 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
744 _csu= lib/csu/${MACHINE_ARCH}.pcc
745 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
746 _csu= lib/csu/i386-elf
748 _csu= lib/csu/${MACHINE_ARCH}
751 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
752 _secure_lib= secure/lib
753 .if exists(${.CURDIR}/secure/lib/libcrypto)
754 _libcrypto= secure/lib/libcrypto
758 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
759 _kerberosIV_lib= kerberosIV/lib
762 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
763 _kerberos5_lib= kerberos5/lib
766 .if ${MACHINE_ARCH} == "i386"
767 _libkeycap= usr.sbin/pcvt/keycap
771 _libperl= gnu/usr.bin/perl/libperl
775 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
776 lib/libz ${_libcrypto} ${_secure_lib} ${_kerberosIV_lib} \
777 ${_kerberos5_lib} lib/libcom_err lib/libkvm lib/msun lib/libncurses \
778 lib/libopie lib/libradius lib/librpcsvc lib/libsbuf lib/libtacplus \
779 lib/libutil lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
780 .if exists(${.CURDIR}/${_lib})
781 cd ${.CURDIR}/${_lib}; \
788 .for __target in clean cleandepend cleandir depend obj
789 .for entry in ${SUBDIR}
790 ${entry}.${__target}__D: .PHONY
791 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
792 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
793 edir=${entry}.${MACHINE_ARCH}; \
794 cd ${.CURDIR}/$${edir}; \
796 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
798 cd ${.CURDIR}/$${edir}; \
800 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
802 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
805 .include <bsd.subdir.mk>