Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DNO_KERBEROS Do not build Heimdal (Kerberos 5)
   6 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   7 #       -DNOCLEAN do not clean at all
   8 #       -DNOCRYPT will prevent building of crypt versions
   9 #       -DNOMAN do not build the manual pages
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNOSECURE do not go into secure subdir
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24
  25 #
  26 # The intended user-driven targets are:
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # installworld- install everything built by "buildworld"
  29 # update      - convenient way to update your source tree (eg: sup/cvs)
  30 # most        - build user commands, no libraries or include files
  31 # installmost - install user commands, no libraries or include files
  32 #
  33 # Standard targets (not defined here) are documented in the makefiles in
  34 # /usr/share/mk.  These include:
  35 #               obj depend all install clean cleandepend cleanobj
  36
  37 # Put initial settings here.
  38 SUBDIR=
  39
  40 # We must do share/info early so that installation of info `dir'
  41 # entries works correctly.  Do it first since it is less likely to
  42 # grow dependencies on include and lib than vice versa.
  43 .if exists(${.CURDIR}/share/info)
  44 SUBDIR+= share/info
  45 .endif
  46
  47 .if exists(${.CURDIR}/include)
  48 SUBDIR+= include
  49 .endif
  50 .if exists(${.CURDIR}/lib)
  51 SUBDIR+= lib
  52 .endif
  53
  54 .if exists(${.CURDIR}/bin)
  55 SUBDIR+= bin
  56 .endif
  57 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  58 SUBDIR+= games
  59 .endif
  60 .if exists(${.CURDIR}/gnu)
  61 SUBDIR+= gnu
  62 .endif
  63 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  64     !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
  65 SUBDIR+= kerberos5
  66 .endif
  67 .if exists(${.CURDIR}/libexec)
  68 SUBDIR+= libexec
  69 .endif
  70 .if exists(${.CURDIR}/sbin)
  71 SUBDIR+= sbin
  72 .endif
  73 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
  74 SUBDIR+= secure
  75 .endif
  76 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  77 SUBDIR+= share
  78 .endif
  79 .if exists(${.CURDIR}/sys)
  80 SUBDIR+= sys
  81 .endif
  82 .if exists(${.CURDIR}/usr.bin)
  83 SUBDIR+= usr.bin
  84 .endif
  85 .if exists(${.CURDIR}/usr.sbin)
  86 SUBDIR+= usr.sbin
  87 .endif
  88
  89 # etc must be last for "distribute" to work
  90 .if exists(${.CURDIR}/etc)
  91 SUBDIR+= etc
  92 .endif
  93
  94 # These are last, since it is nice to at least get the base system
  95 # rebuilt before you do them.
  96 .if defined(LOCAL_DIRS)
  97 .for _DIR in ${LOCAL_DIRS}
  98 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  99 SUBDIR+= ${_DIR}
 100 .endif
 101 .endfor
 102 .endif
 103
 104 .if defined(SUBDIR_OVERRIDE)
 105 SUBDIR=         ${SUBDIR_OVERRIDE}
 106 .endif
 107
 108 .if defined(NOCLEANDIR)
 109 CLEANDIR=       clean cleandepend
 110 .else
 111 CLEANDIR=       cleandir
 112 .endif
 113
 114 CVS?=           cvs
 115 SUP?=           /usr/local/bin/cvsup
 116 SUPFLAGS?=      -g -L 2 -P -
 117 .if defined(SUPHOST)
 118 SUPFLAGS+=      -h ${SUPHOST}
 119 .endif
 120
 121 MAKEOBJDIRPREFIX?=      /usr/obj
 122 .if !defined(OSRELDATE)
 123 OSRELDATE!=     sysctl -n kern.osreldate
 124 .endif
 125 TARGET_ARCH?=   ${MACHINE_ARCH}
 126 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 127 TARGET?=        ${MACHINE}
 128 TARGET_CPUTYPE?=${CPUTYPE}
 129 .else
 130 TARGET?=        ${TARGET_ARCH}
 131 TARGET_CPUTYPE?=
 132 .endif
 133 .if !empty(TARGET_CPUTYPE)
 134 _TARGET_CPUTYPE=${TARGET_CPUTYPE}
 135 .else
 136 _TARGET_CPUTYPE=dummy
 137 .endif
 138 _CPUTYPE!=      ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \
 139                 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE
 140 .if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
 141 .error CPUTYPE global should be set with ?=.
 142 .endif
 143 .if make(buildworld)
 144 BUILD_ARCH!=    sysctl -n hw.machine_arch
 145 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 146 .error To cross-build, set TARGET_ARCH.
 147 .endif
 148 .endif
 149 .if ${MACHINE} == ${TARGET}
 150 OBJTREE=        ${MAKEOBJDIRPREFIX}
 151 .else
 152 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET}
 153 .endif
 154 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 155 # /usr/games added for fortune which depend on strfile
 156 BPATH=          ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
 157 XPATH=          ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 158 STRICTTMPPATH=  ${BPATH}:${XPATH}
 159 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 160
 161 INSTALLTMP!=    /usr/bin/mktemp -d -u -t install
 162
 163 #
 164 # Building a world goes through the following stages
 165 #
 166 # 1. legacy stage [BMAKE]
 167 #       This stage is responsible for creating compatibility
 168 #       shims that are needed by the bootstrap-tools,
 169 #       build-tools and cross-tools stages.
 170 # 1. bootstrap-tools stage [BMAKE]
 171 #       This stage is responsible for creating programs that
 172 #       are needed for backward compatibility reasons. They
 173 #       are not built as cross-tools.
 174 # 2. build-tools stage [TMAKE]
 175 #       This stage is responsible for creating the object
 176 #       tree and building any tools that are needed during
 177 #       the build process.
 178 # 3. cross-tools stage [XMAKE]
 179 #       This stage is responsible for creating any tools that
 180 #       are needed for cross-builds. A cross-compiler is one
 181 #       of them.
 182 # 4. world stage [WMAKE]
 183 #       This stage actually builds the world.
 184 # 5. install stage (optional) [IMAKE]
 185 #       This stage installs a previously built world.
 186 #
 187
 188 BOOTSTRAPPING?= 0
 189
 190 # Common environment for world related stages
 191 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 192                 MACHINE_ARCH=${TARGET_ARCH} \
 193                 MACHINE=${TARGET} \
 194                 CPUTYPE=${TARGET_CPUTYPE} \
 195                 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
 196                 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
 197                 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
 198
 199 # bootstrap-tools stage
 200 BMAKEENV=       DESTDIR= \
 201                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 202                 PATH=${BPATH}:${PATH} \
 203                 WORLDTMP=${WORLDTMP} \
 204                 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
 205 BMAKE=          MAKEOBJDIRPREFIX=${WORLDTMP} \
 206                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 207                 BOOTSTRAPPING=${OSRELDATE} \
 208                 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \
 209                 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS
 210
 211 # build-tools stage
 212 TMAKE=          MAKEOBJDIRPREFIX=${OBJTREE} \
 213                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 214                 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS
 215
 216 # cross-tools stage
 217 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 218
 219 # world stage
 220 WMAKEENV=       ${CROSSENV} \
 221                 DESTDIR=${WORLDTMP} \
 222                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 223                 PATH=${TMPPATH}
 224 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 225
 226 # install stage
 227 IMAKEENV=       ${CROSSENV} \
 228                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 229 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 230
 231 # kernel stage
 232 KMAKEENV=       ${WMAKEENV}
 233
 234 #
 235 # buildworld
 236 #
 237 # Attempt to rebuild the entire system, with reasonable chance of
 238 # success, regardless of how old your existing system is.
 239 #
 240 _worldtmp:
 241 .if ${.CURDIR:C/[^,]//g} != ""
 242 #       The m4 build of sendmail files doesn't like it if ',' is used
 243 #       anywhere in the path of it's files.
 244         @echo
 245         @echo "*** Error: path to source tree contains a comma ','"
 246         @echo
 247         @false
 248 .endif
 249         @echo
 250         @echo "--------------------------------------------------------------"
 251         @echo ">>> Rebuilding the temporary build tree"
 252         @echo "--------------------------------------------------------------"
 253 .if !defined(NOCLEAN)
 254         rm -rf ${WORLDTMP}
 255 .else
 256         rm -rf ${WORLDTMP}/legacy/usr/include
 257         # XXX - These two can depend on any header file.
 258         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 259         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 260 .endif
 261 .for _dir in \
 262     usr/bin usr/games usr/include/sys usr/lib \
 263     usr/libexec usr/sbin usr/share/dict \
 264     usr/share/groff_font/devX100 \
 265     usr/share/groff_font/devX100-12 \
 266     usr/share/groff_font/devX75 \
 267     usr/share/groff_font/devX75-12 \
 268     usr/share/groff_font/devascii \
 269     usr/share/groff_font/devcp1047 \
 270     usr/share/groff_font/devdvi \
 271     usr/share/groff_font/devhtml \
 272     usr/share/groff_font/devkoi8-r \
 273     usr/share/groff_font/devlatin1 \
 274     usr/share/groff_font/devlbp \
 275     usr/share/groff_font/devlj4 \
 276     usr/share/groff_font/devps \
 277     usr/share/groff_font/devutf8 \
 278     usr/share/tmac/mdoc usr/share/tmac/mm
 279         mkdir -p ${WORLDTMP}/legacy/${_dir}
 280 .endfor
 281 .for _dir in \
 282     usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \
 283     usr/libexec usr/share/misc
 284         mkdir -p ${WORLDTMP}/${_dir}
 285 .endfor
 286         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 287 _legacy:
 288         @echo
 289         @echo "--------------------------------------------------------------"
 290         @echo ">>> stage 1: legacy release compatibility shims"
 291         @echo "--------------------------------------------------------------"
 292         cd ${.CURDIR}; ${BMAKE} legacy
 293 _bootstrap-tools:
 294         @echo
 295         @echo "--------------------------------------------------------------"
 296         @echo ">>> stage 1: bootstrap tools"
 297         @echo "--------------------------------------------------------------"
 298         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 299 _cleanobj:
 300 .if !defined(NOCLEAN)
 301         @echo
 302         @echo "--------------------------------------------------------------"
 303         @echo ">>> stage 2: cleaning up the object tree"
 304         @echo "--------------------------------------------------------------"
 305         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 306 .endif
 307 _obj:
 308         @echo
 309         @echo "--------------------------------------------------------------"
 310         @echo ">>> stage 2: rebuilding the object tree"
 311         @echo "--------------------------------------------------------------"
 312         cd ${.CURDIR}; ${WMAKE} par-obj
 313 _build-tools:
 314         @echo
 315         @echo "--------------------------------------------------------------"
 316         @echo ">>> stage 2: build tools"
 317         @echo "--------------------------------------------------------------"
 318         cd ${.CURDIR}; ${TMAKE} build-tools
 319 _cross-tools:
 320         @echo
 321         @echo "--------------------------------------------------------------"
 322         @echo ">>> stage 3: cross tools"
 323         @echo "--------------------------------------------------------------"
 324         cd ${.CURDIR}; ${XMAKE} cross-tools
 325 _includes:
 326         @echo
 327         @echo "--------------------------------------------------------------"
 328         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 329         @echo "--------------------------------------------------------------"
 330         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 331 _libraries:
 332         @echo
 333         @echo "--------------------------------------------------------------"
 334         @echo ">>> stage 4: building libraries"
 335         @echo "--------------------------------------------------------------"
 336         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 337 _depend:
 338         @echo
 339         @echo "--------------------------------------------------------------"
 340         @echo ">>> stage 4: make dependencies"
 341         @echo "--------------------------------------------------------------"
 342         cd ${.CURDIR}; ${WMAKE} par-depend
 343 everything:
 344         @echo
 345         @echo "--------------------------------------------------------------"
 346         @echo ">>> stage 4: building everything.."
 347         @echo "--------------------------------------------------------------"
 348         cd ${.CURDIR}; ${WMAKE} par-all
 349
 350
 351 WMAKE_TGTS=
 352 .if !defined(SUBDIR_OVERRIDE)
 353 WMAKE_TGTS+=    _worldtmp _legacy _bootstrap-tools
 354 .endif
 355 WMAKE_TGTS+=    _cleanobj _obj _build-tools
 356 .if !defined(SUBDIR_OVERRIDE)
 357 WMAKE_TGTS+=    _cross-tools
 358 .endif
 359 WMAKE_TGTS+=    _includes _libraries _depend everything
 360
 361 buildworld: ${WMAKE_TGTS}
 362 .ORDER: ${WMAKE_TGTS}
 363
 364 #
 365 # installcheck
 366 #
 367 # Checks to be sure system is ready for installworld
 368 #
 369 installcheck:
 370 .if !defined(NO_SENDMAIL)
 371         @if ! `grep -q '^smmsp:' /etc/passwd`; then \
 372                 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
 373                 false; \
 374         fi
 375         @if ! `grep -q '^smmsp:' /etc/group`; then \
 376                 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
 377                 false; \
 378         fi
 379 .endif
 380 .if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \
 381     (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/")
 382         @echo "Checking to see if your booted kernel is fresh enough.."
 383         ${.OBJDIR}/bin/sh/sh -c \
 384             'echo "Testing installed kernel for new sigaction(2) syscall"'
 385         @echo "Seems ok.."
 386 .endif
 387
 388 #
 389 # distributeworld
 390 #
 391 # Distributes everything compiled by a `buildworld'.
 392 #
 393 # installworld
 394 #
 395 # Installs everything compiled by a 'buildworld'.
 396 #
 397 distributeworld installworld: installcheck
 398         mkdir -p ${INSTALLTMP}
 399         for prog in [ awk cap_mkdb cat chflags chmod chown \
 400             date echo egrep find grep \
 401             ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
 402             test true uname wc zic; do \
 403                 cp `which $$prog` ${INSTALLTMP}; \
 404         done
 405         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 406         rm -rf ${INSTALLTMP}
 407
 408 #
 409 # reinstall
 410 #
 411 # If you have a build server, you can NFS mount the source and obj directories
 412 # and do a 'make reinstall' on the *client* to install new binaries from the
 413 # most recent server build.
 414 #
 415 reinstall:
 416         @echo "--------------------------------------------------------------"
 417         @echo ">>> Making hierarchy"
 418         @echo "--------------------------------------------------------------"
 419         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 420         @echo
 421         @echo "--------------------------------------------------------------"
 422         @echo ">>> Installing everything.."
 423         @echo "--------------------------------------------------------------"
 424         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 425 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 426         @echo
 427         @echo "--------------------------------------------------------------"
 428         @echo ">>> Rebuilding man page indices"
 429         @echo "--------------------------------------------------------------"
 430         cd ${.CURDIR}/share/man; ${MAKE} makedb
 431 .endif
 432
 433 redistribute:
 434         @echo "--------------------------------------------------------------"
 435         @echo ">>> Distributing everything.."
 436         @echo "--------------------------------------------------------------"
 437         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 438
 439 #
 440 # buildkernel and installkernel
 441 #
 442 # Which kernels to build and/or install is specified by setting
 443 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 444 # Only the existing (depending TARGET) config files are used
 445 # for building kernels and only the first of these is designated
 446 # as the one being installed.
 447 #
 448 # Note that we have to use TARGET instead of TARGET_ARCH when
 449 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 450 # be set to cross-build, we have to make sure TARGET is set
 451 # properly.
 452
 453 .if !defined(KERNCONF) && defined(KERNEL)
 454 KERNCONF=       ${KERNEL}
 455 KERNWARN=       yes
 456 .else
 457 KERNCONF?=      GENERIC
 458 .endif
 459 INSTKERNNAME?=  kernel
 460
 461 KERNSRCDIR?=    ${.CURDIR}/sys
 462 KRNLCONFDIR=    ${KERNSRCDIR}/${TARGET}/conf
 463 KRNLOBJDIR=     ${OBJTREE}${KERNSRCDIR}
 464 KERNCONFDIR?=   ${KRNLCONFDIR}
 465
 466 BUILDKERNELS=
 467 INSTALLKERNEL=
 468 .for _kernel in ${KERNCONF}
 469 .if exists(${KERNCONFDIR}/${_kernel})
 470 BUILDKERNELS+=  ${_kernel}
 471 .if empty(INSTALLKERNEL)
 472 INSTALLKERNEL= ${_kernel}
 473 .endif
 474 .endif
 475 .endfor
 476
 477 #
 478 # buildkernel
 479 #
 480 # Builds all kernels defined by BUILDKERNELS.
 481 #
 482 buildkernel:
 483 .if empty(BUILDKERNELS)
 484         @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF}).";
 485         @false
 486 .endif
 487 .if defined(KERNWARN)
 488         @echo "--------------------------------------------------------------"
 489         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 490         @echo "--------------------------------------------------------------"
 491         @sleep 3
 492 .endif
 493         @echo
 494 .for _kernel in ${BUILDKERNELS}
 495         @echo "--------------------------------------------------------------"
 496         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 497         @echo "--------------------------------------------------------------"
 498         @echo "===> ${_kernel}"
 499         mkdir -p ${KRNLOBJDIR}
 500 .if !defined(NO_KERNELCONFIG)
 501         cd ${KRNLCONFDIR}; \
 502                 PATH=${TMPPATH} \
 503                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 504                         ${KERNCONFDIR}/${_kernel}
 505 .endif
 506 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 507         cd ${KRNLOBJDIR}/${_kernel}; \
 508             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR}
 509 .endif
 510         cd ${KRNLOBJDIR}/${_kernel}; \
 511             MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
 512             ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
 513         cd ${KRNLOBJDIR}/${_kernel}; \
 514             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj
 515 # XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
 516 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
 517 .for target in obj depend all
 518         cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \
 519             MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
 520             ${MAKE} -DNO_CPU_CFLAGS ${target}
 521 .endfor
 522 .endif
 523 .if !defined(NO_KERNELDEPEND)
 524         cd ${KRNLOBJDIR}/${_kernel}; \
 525             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ
 526 .endif
 527         cd ${KRNLOBJDIR}/${_kernel}; \
 528             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ
 529         @echo "--------------------------------------------------------------"
 530         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 531         @echo "--------------------------------------------------------------"
 532 .endfor
 533
 534 #
 535 # installkernel
 536 #
 537 # Install the kernel defined by INSTALLKERNEL
 538 #
 539 installkernel reinstallkernel:
 540 .if empty(INSTALLKERNEL)
 541         @echo "ERROR: No kernel \"${KERNCONF}\" to install."
 542         @false
 543 .endif
 544         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 545             ${CROSSENV} PATH=${TMPPATH} \
 546             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 547
 548 #
 549 # update
 550 #
 551 # Update the source tree, by running sup and/or running cvs to update to the
 552 # latest copy.
 553 #
 554 update:
 555 .if defined(SUP_UPDATE)
 556         @echo "--------------------------------------------------------------"
 557         @echo ">>> Running ${SUP}"
 558         @echo "--------------------------------------------------------------"
 559 .if defined(SUPFILE)
 560         @${SUP} ${SUPFLAGS} ${SUPFILE}
 561 .endif
 562 .if defined(SUPFILE1)
 563         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 564 .endif
 565 .if defined(SUPFILE2)
 566         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 567 .endif
 568 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 569         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 570 .endif
 571 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 572         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 573 .endif
 574 .endif
 575 .if defined(CVS_UPDATE)
 576         @echo "--------------------------------------------------------------"
 577         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 578         @echo "--------------------------------------------------------------"
 579         cd ${.CURDIR}; ${CVS} -R -q update -A -P -d
 580 .endif
 581
 582 #
 583 # most
 584 #
 585 # Build most of the user binaries on the existing system libs and includes.
 586 #
 587 most:
 588         @echo "--------------------------------------------------------------"
 589         @echo ">>> Building programs only"
 590         @echo "--------------------------------------------------------------"
 591 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
 592         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 593 .endfor
 594
 595 #
 596 # installmost
 597 #
 598 # Install the binaries built by the 'most' target.  This does not include
 599 # libraries or include files.
 600 #
 601 installmost:
 602         @echo "--------------------------------------------------------------"
 603         @echo ">>> Installing programs only"
 604         @echo "--------------------------------------------------------------"
 605 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
 606         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 607 .endfor
 608
 609 #
 610 # ------------------------------------------------------------------------
 611 #
 612 # From here onwards are utility targets used by the 'make world' and
 613 # related targets.  If your 'world' breaks, you may like to try to fix
 614 # the problem and manually run the following targets to attempt to
 615 # complete the build.  Beware, this is *not* guaranteed to work, you
 616 # need to have a pretty good grip on the current state of the system
 617 # to attempt to manually finish it.  If in doubt, 'make world' again.
 618 #
 619
 620 #
 621 # legacy: Build compatibility shims for the next three targets
 622 #
 623 legacy:
 624 .for _tool in tools/build
 625         @${ECHODIR} "===> ${_tool}"; \
 626             cd ${.CURDIR}/${_tool}; \
 627             ${MAKE} DIRPRFX=${_tool}/ obj; \
 628             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
 629             ${MAKE} DIRPRFX=${_tool}/ depend; \
 630             ${MAKE} DIRPRFX=${_tool}/ all; \
 631             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 632 .endfor
 633
 634 #
 635 # bootstrap-tools: Build tools needed for compatibility
 636 #
 637 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 638 _strfile=       games/fortune/strfile
 639 .endif
 640
 641 .if ${BOOTSTRAPPING} < 500113
 642 _groff=         gnu/usr.bin/groff
 643 .else
 644 _groff=         gnu/usr.bin/groff/tmac
 645 .endif
 646
 647 .if ( ${BOOTSTRAPPING} < 450005 || \
 648     ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 ))
 649 _uudecode=      usr.bin/uudecode
 650 .endif
 651
 652 .if ( ${BOOTSTRAPPING} < 430002 || \
 653     ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 ))
 654 _xargs=         usr.bin/xargs
 655 .endif
 656
 657 .if ( ${BOOTSTRAPPING} < 430002 || \
 658     ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 ))
 659 _yacc=          usr.bin/yacc
 660 .endif
 661
 662 .if ${BOOTSTRAPPING} < 500019
 663 _kbdcontrol=    usr.sbin/kbdcontrol
 664 .endif
 665
 666 bootstrap-tools:
 667 .for _tool in ${_strfile} usr.bin/colldef \
 668     usr.bin/makewhatis usr.bin/rpcgen ${_uudecode} \
 669     ${_xargs} usr.bin/xinstall ${_yacc} \
 670     usr.sbin/config ${_kbdcontrol} \
 671     gnu/usr.bin/gperf ${_groff} gnu/usr.bin/texinfo
 672         @${ECHODIR} "===> ${_tool}"; \
 673                 cd ${.CURDIR}/${_tool}; \
 674                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 675                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 676                 ${MAKE} DIRPRFX=${_tool}/ all; \
 677                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 678 .endfor
 679
 680 #
 681 # build-tools: Build special purpose build tools
 682 #
 683 .if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
 684 _aicasm= sys/modules/aic7xxx/aicasm
 685 .endif
 686
 687 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 688 _share= share/syscons/scrnmaps
 689 .endif
 690
 691 .if !defined(NO_FORTRAN)
 692 _fortran= gnu/usr.bin/cc/f771
 693 .endif
 694
 695 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 696     !defined(NOCRYPT) && !defined(NO_KERBEROS)
 697 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 698     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 699 .endif
 700
 701 build-tools:
 702 .for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \
 703     ${_libkrb5} lib/libncurses ${_share} \
 704     ${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall
 705         @${ECHODIR} "===> ${_tool}"; \
 706                 cd ${.CURDIR}/${_tool}; \
 707                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 708                 ${MAKE} DIRPRFX=${_tool}/ build-tools
 709 .endfor
 710
 711 #
 712 # cross-tools: Build cross-building tools
 713 #
 714 .if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH}
 715 _elf2exe=       usr.sbin/elf2exe
 716 .endif
 717
 718 .if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH}
 719 _btxld= usr.sbin/btxld
 720 .if defined(RELEASEDIR)
 721 _kgzip= usr.sbin/kgzip
 722 .endif
 723 .endif
 724
 725 .if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
 726     ${BOOTSTRAPPING} < 500037
 727 _elf2aout=      usr.bin/elf2aout
 728 .endif
 729
 730 .if defined(RELEASEDIR)
 731 _crunchide=     usr.sbin/crunch/crunchide
 732 .endif
 733
 734 _xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint
 735
 736 cross-tools:
 737 .for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \
 738     gnu/usr.bin/binutils ${_crunchide} \
 739     gnu/usr.bin/cc ${_xlint} ${_kgzip}
 740         @${ECHODIR} "===> ${_tool}"; \
 741                 cd ${.CURDIR}/${_tool}; \
 742                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 743                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 744                 ${MAKE} DIRPRFX=${_tool}/ all; \
 745                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
 746 .endfor
 747
 748 #
 749 # hierarchy - ensure that all the needed directories are present
 750 #
 751 hierarchy:
 752         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 753
 754 #
 755 # libraries - build all libraries, and install them under ${DESTDIR}.
 756 #
 757 # The list of libraries with dependents (${_prebuild_libs}) and their
 758 # interdependencies (__L) are built automatically by the
 759 # ${.CURDIR}/tools/make_libdeps.sh script.
 760 #
 761 libraries:
 762         cd ${.CURDIR}; \
 763             ${MAKE} -f Makefile.inc1 _startup_libs; \
 764             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 765             ${MAKE} -f Makefile.inc1 _generic_libs;
 766
 767 # These dependencies are not automatically generated:
 768 #
 769 # gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
 770 # shared libraries for ELF.
 771 #
 772 _startup_libs=  gnu/lib/csu gnu/lib/libgcc
 773 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
 774 _startup_libs+= lib/csu/${MACHINE_ARCH}-elf
 775 .else
 776 _startup_libs+= lib/csu/${MACHINE_ARCH}
 777 .endif
 778
 779 _prebuild_libs=
 780
 781 _generic_libs=  gnu/lib
 782
 783 .if !defined(NOCRYPT) && !defined(NO_KERBEROS)
 784 _prebuild_libs+=        kerberos5/lib/libasn1
 785 _prebuild_libs+=        kerberos5/lib/libgssapi
 786 _prebuild_libs+=        kerberos5/lib/libkrb5
 787 _prebuild_libs+=        kerberos5/lib/libroken
 788 _generic_libs+= kerberos5/lib
 789 .endif
 790
 791 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \
 792                 lib/libncurses lib/libopie lib/libpam lib/libradius \
 793                 lib/librpcsvc \
 794                 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
 795                 lib/libz lib/msun
 796
 797 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 798 lib/libypclnt__L: lib/librpcsvc__L
 799
 800 _generic_libs+= lib
 801
 802 .if !defined(NOCRYPT) && !defined(NOSECURE)
 803 .if !defined(NO_OPENSSL)
 804 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 805 .if !defined(NO_OPENSSH)
 806 _prebuild_libs+=        secure/lib/libssh
 807 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 808 .endif
 809 .endif
 810 _generic_libs+= secure/lib
 811 .endif
 812
 813 _generic_libs+= usr.bin/lex/lib
 814
 815 .if ${MACHINE_ARCH} == "i386"
 816 _generic_libs+= usr.sbin/pcvt/keycap
 817 .endif
 818
 819 .for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
 820 ${_lib}__L: .PHONY
 821 .if exists(${.CURDIR}/${_lib})
 822         @${ECHODIR} "===> ${_lib}"; \
 823                 cd ${.CURDIR}/${_lib}; \
 824                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 825                 ${MAKE} DIRPRFX=${_lib}/ all; \
 826                 ${MAKE} DIRPRFX=${_lib}/ install
 827 .endif
 828 .endfor
 829
 830 # libpam is special: we need to build static PAM modules before
 831 # static PAM library, and dynamic PAM library before dynamic PAM
 832 # modules.
 833 lib/libpam__L: .PHONY
 834         @${ECHODIR} "===> lib/libpam"; \
 835                 cd ${.CURDIR}/lib/libpam; \
 836                 ${MAKE} DIRPRFX=lib/libpam/ depend; \
 837                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
 838                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
 839
 840 _startup_libs: ${_startup_libs:S/$/__L/}
 841 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 842 _generic_libs: ${_generic_libs:S/$/__L/}
 843
 844 .for __target in all clean cleandepend cleandir depend includes obj
 845 .for entry in ${SUBDIR}
 846 ${entry}.${__target}__D: .PHONY
 847         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 848                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 849                 edir=${entry}.${MACHINE_ARCH}; \
 850                 cd ${.CURDIR}/$${edir}; \
 851         else \
 852                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 853                 edir=${entry}; \
 854                 cd ${.CURDIR}/$${edir}; \
 855         fi; \
 856         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 857 .endfor
 858 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 859 .endfor
 860
 861 .include <bsd.subdir.mk>