Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DMAKE_KERBEROS4 to build KerberosIV
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNOSECURE do not go into secure subdir
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PERL do not build perl5 and related libraries
  21 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  22 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  23 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  24 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  25
  26 #
  27 # The intended user-driven targets are:
  28 # buildworld  - rebuild *everything*, including glue to help do upgrades
  29 # installworld- install everything built by "buildworld"
  30 # update      - convenient way to update your source tree (eg: sup/cvs)
  31 # most        - build user commands, no libraries or include files
  32 # installmost - install user commands, no libraries or include files
  33 #
  34 # Standard targets (not defined here) are documented in the makefiles in
  35 # /usr/share/mk.  These include:
  36 #               obj depend all install clean cleandepend cleanobj
  37
  38 # Put initial settings here.
  39 SUBDIR=
  40
  41 # We must do share/info early so that installation of info `dir'
  42 # entries works correctly.  Do it first since it is less likely to
  43 # grow dependencies on include and lib than vice versa.
  44 .if exists(${.CURDIR}/share/info)
  45 SUBDIR+= share/info
  46 .endif
  47
  48 # We must do include and lib early so that the perl *.ph generation
  49 # works correctly as it uses the header files installed by this.
  50 .if exists(${.CURDIR}/include)
  51 SUBDIR+= include
  52 .endif
  53 .if exists(${.CURDIR}/lib)
  54 SUBDIR+= lib
  55 .endif
  56
  57 .if exists(${.CURDIR}/bin)
  58 SUBDIR+= bin
  59 .endif
  60 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  61 SUBDIR+= games
  62 .endif
  63 .if exists(${.CURDIR}/gnu)
  64 SUBDIR+= gnu
  65 .endif
  66 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
  67     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
  68 SUBDIR+= kerberosIV
  69 .endif
  70 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  71     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  72 SUBDIR+= kerberos5
  73 .endif
  74 .if exists(${.CURDIR}/libexec)
  75 SUBDIR+= libexec
  76 .endif
  77 .if exists(${.CURDIR}/sbin)
  78 SUBDIR+= sbin
  79 .endif
  80 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
  81 SUBDIR+= secure
  82 .endif
  83 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  84 SUBDIR+= share
  85 .endif
  86 .if exists(${.CURDIR}/sys)
  87 SUBDIR+= sys
  88 .endif
  89 .if exists(${.CURDIR}/usr.bin)
  90 SUBDIR+= usr.bin
  91 .endif
  92 .if exists(${.CURDIR}/usr.sbin)
  93 SUBDIR+= usr.sbin
  94 .endif
  95
  96 # etc must be last for "distribute" to work
  97 .if exists(${.CURDIR}/etc)
  98 SUBDIR+= etc
  99 .endif
 100
 101 # These are last, since it is nice to at least get the base system
 102 # rebuilt before you do them.
 103 .if defined(LOCAL_DIRS)
 104 .for _DIR in ${LOCAL_DIRS}
 105 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 106 SUBDIR+= ${_DIR}
 107 .endif
 108 .endfor
 109 .endif
 110
 111 .if defined(NOCLEANDIR)
 112 CLEANDIR=       clean cleandepend
 113 .else
 114 CLEANDIR=       cleandir
 115 .endif
 116
 117 CVS?=           cvs
 118 SUP?=           /usr/local/bin/cvsup
 119 SUPFLAGS?=      -g -L 2 -P -
 120 .if defined(SUPHOST)
 121 SUPFLAGS+=      -h ${SUPHOST}
 122 .endif
 123
 124 MAKEOBJDIRPREFIX?=      /usr/obj
 125 TARGET_ARCH?=   ${MACHINE_ARCH}
 126 TARGET?=        ${MACHINE}
 127 .if make(buildworld)
 128 BUILD_ARCH!=    sysctl -n hw.machine_arch
 129 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 130 .error To cross-build, set TARGET_ARCH.
 131 .endif
 132 .endif
 133 .if ${MACHINE_ARCH} == ${TARGET_ARCH}
 134 OBJTREE=        ${MAKEOBJDIRPREFIX}
 135 .else
 136 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET_ARCH}
 137 .endif
 138 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 139 # /usr/games added for fortune which depend on strfile
 140 STRICTTMPPATH=  ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 141 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 142 OBJFORMAT_PATH?=        /usr/libexec
 143
 144 INSTALLTMP!=    /usr/bin/mktemp -d -u -t install
 145
 146 #
 147 # Building a world goes through the following stages
 148 #
 149 # 1. bootstrap-tool stage [BMAKE]
 150 #       This stage is responsible for creating programs that
 151 #       are needed for backward compatibility reasons. They
 152 #       are not built as cross-tools.
 153 # 2. build-tool stage [TMAKE]
 154 #       This stage is responsible for creating the object
 155 #       tree and building any tools that are needed during
 156 #       the build process.
 157 # 3. cross-tool stage [XMAKE]
 158 #       This stage is responsible for creating any tools that
 159 #       are needed for cross-builds. A cross-compiler is one
 160 #       of them.
 161 # 4. world stage [WMAKE]
 162 #       This stage actually builds the world.
 163 # 5. install stage (optional) [IMAKE]
 164 #       This stage installs a previously built world.
 165 #
 166
 167 # Common environment for world related stages
 168 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 169                 MACHINE_ARCH=${TARGET_ARCH} \
 170                 MACHINE=${TARGET} \
 171                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
 172                 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.1 \
 173                 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
 174                 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
 175                 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
 176
 177 # bootstrap-tool stage
 178 BMAKEENV=       MAKEOBJDIRPREFIX=${WORLDTMP} \
 179                 DESTDIR= \
 180                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 181 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 182                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 183                 -DNO_WERROR
 184
 185 # build-tool stage
 186 TMAKEENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 187                 DESTDIR= \
 188                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 189 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
 190
 191 # cross-tool stage
 192 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 193
 194 # world stage
 195 WMAKEENV=       ${CROSSENV} \
 196                 DESTDIR=${WORLDTMP} \
 197                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 198                 PATH=${TMPPATH}
 199 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 200
 201 # install stage
 202 IMAKEENV=       ${CROSSENV} \
 203                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 204 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 205
 206 # kernel stage
 207 KMAKEENV=       ${WMAKEENV} \
 208                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
 209
 210 USRDIRS=        usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
 211                 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
 212                 usr/share/dict \
 213                 usr/share/groff_font/devX100 \
 214                 usr/share/groff_font/devX100-12 \
 215                 usr/share/groff_font/devX75 \
 216                 usr/share/groff_font/devX75-12 \
 217                 usr/share/groff_font/devascii \
 218                 usr/share/groff_font/devcp1047 \
 219                 usr/share/groff_font/devdvi \
 220                 usr/share/groff_font/devhtml \
 221                 usr/share/groff_font/devkoi8-r \
 222                 usr/share/groff_font/devlatin1 \
 223                 usr/share/groff_font/devlbp \
 224                 usr/share/groff_font/devlj4 \
 225                 usr/share/groff_font/devps \
 226                 usr/share/groff_font/devutf8 \
 227                 usr/share/tmac/mdoc usr/share/tmac/mm
 228
 229 INCDIRS=        arpa g++/std isc objc protocols readline rpc rpcsvc openssl \
 230                 security
 231
 232 #
 233 # buildworld
 234 #
 235 # Attempt to rebuild the entire system, with reasonable chance of
 236 # success, regardless of how old your existing system is.
 237 #
 238 buildworld:
 239         @echo
 240         @echo "--------------------------------------------------------------"
 241         @echo ">>> Rebuilding the temporary build tree"
 242         @echo "--------------------------------------------------------------"
 243 .if !defined(NOCLEAN)
 244         rm -rf ${WORLDTMP}
 245 .endif
 246 .for _dir in ${USRDIRS}
 247         mkdir -p ${WORLDTMP}/${_dir}
 248 .endfor
 249 .for _dir in ${INCDIRS}
 250         mkdir -p ${WORLDTMP}/usr/include/${_dir}
 251 .endfor
 252         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 253         @echo
 254         @echo "--------------------------------------------------------------"
 255         @echo ">>> stage 1: bootstrap tools"
 256         @echo "--------------------------------------------------------------"
 257         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 258 .if !defined(NOCLEAN)
 259         @echo
 260         @echo "--------------------------------------------------------------"
 261         @echo ">>> stage 2: cleaning up the object tree"
 262         @echo "--------------------------------------------------------------"
 263         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 264 .endif
 265         @echo
 266         @echo "--------------------------------------------------------------"
 267         @echo ">>> stage 2: rebuilding the object tree"
 268         @echo "--------------------------------------------------------------"
 269         cd ${.CURDIR}; ${WMAKE} par-obj
 270         @echo
 271         @echo "--------------------------------------------------------------"
 272         @echo ">>> stage 2: build tools"
 273         @echo "--------------------------------------------------------------"
 274         cd ${.CURDIR}; ${TMAKE} build-tools
 275         @echo
 276         @echo "--------------------------------------------------------------"
 277         @echo ">>> stage 3: cross tools"
 278         @echo "--------------------------------------------------------------"
 279         cd ${.CURDIR}; ${XMAKE} cross-tools
 280         @echo
 281         @echo "--------------------------------------------------------------"
 282         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 283         @echo "--------------------------------------------------------------"
 284         cd ${.CURDIR}; ${WMAKE} SHARED=copies includes
 285         @echo
 286         @echo "--------------------------------------------------------------"
 287         @echo ">>> stage 4: building libraries"
 288         @echo "--------------------------------------------------------------"
 289         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 290         @echo
 291         @echo "--------------------------------------------------------------"
 292         @echo ">>> stage 4: make dependencies"
 293         @echo "--------------------------------------------------------------"
 294         cd ${.CURDIR}; ${WMAKE} par-depend
 295         @echo
 296         @echo "--------------------------------------------------------------"
 297         @echo ">>> stage 4: building everything.."
 298         @echo "--------------------------------------------------------------"
 299         cd ${.CURDIR}; ${WMAKE} all
 300
 301 everything:
 302         @echo "--------------------------------------------------------------"
 303         @echo ">>> Building everything.."
 304         @echo "--------------------------------------------------------------"
 305         cd ${.CURDIR}; ${WMAKE} all
 306
 307 #
 308 # installworld
 309 #
 310 # Installs everything compiled by a 'buildworld'.
 311 #
 312 installworld:
 313         mkdir -p ${INSTALLTMP}
 314         for prog in [ awk cat chflags chmod chown date echo egrep find grep \
 315             ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
 316             test true uname wc zic; do \
 317                 cp `which $$prog` ${INSTALLTMP}; \
 318         done
 319         cd ${.CURDIR}; ${IMAKE} reinstall
 320         rm -rf ${INSTALLTMP}
 321
 322 #
 323 # reinstall
 324 #
 325 # If you have a build server, you can NFS mount the source and obj directories
 326 # and do a 'make reinstall' on the *client* to install new binaries from the
 327 # most recent server build.
 328 #
 329 reinstall:
 330         @echo "--------------------------------------------------------------"
 331         @echo ">>> Making hierarchy"
 332         @echo "--------------------------------------------------------------"
 333         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 334         @echo
 335         @echo "--------------------------------------------------------------"
 336         @echo ">>> Installing everything.."
 337         @echo "--------------------------------------------------------------"
 338         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 339 .if !defined(NOMAN)
 340         @echo
 341         @echo "--------------------------------------------------------------"
 342         @echo ">>> Rebuilding man page indices"
 343         @echo "--------------------------------------------------------------"
 344         cd ${.CURDIR}/share/man; ${MAKE} makedb
 345 .endif
 346
 347 #
 348 # distribworld
 349 #
 350 # Front-end to distribute to make sure the search path contains
 351 # the object directory. Needed for miniperl.
 352 #
 353 distribworld:
 354         cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
 355
 356 #
 357 # buildkernel and installkernel
 358 #
 359 # Which kernels to build and/or install is specified by setting
 360 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 361 # Only the existing (depending TARGET) config files are used
 362 # for building kernels and only the first of these is designated
 363 # as the one being installed.
 364 #
 365 # Note that we have to use TARGET instead of TARGET_ARCH when
 366 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 367 # be set to cross-build, we have to make sure TARGET is set
 368 # properly.
 369
 370 .if !defined(KERNCONF) && defined(KERNEL)
 371 KERNCONF=       ${KERNEL}
 372 KERNWARN=       yes
 373 .else
 374 KERNCONF?=      GENERIC
 375 .endif
 376 INSTKERNNAME?=  kernel
 377
 378 # The only exotic TARGET_ARCH/TARGET combination valid at this
 379 # time is i386/pc98. In all other cases set TARGET equal to
 380 # TARGET_ARCH.
 381 .if ${TARGET_ARCH} != "i386" || ${TARGET} != "pc98"
 382 TARGET=         ${TARGET_ARCH}
 383 .endif
 384
 385 KRNLSRCDIR=     ${.CURDIR}/sys
 386 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 387 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 388 KERNCONFDIR?=   ${KRNLCONFDIR}
 389
 390 BUILDKERNELS=
 391 INSTALLKERNEL=
 392 .for _kernel in ${KERNCONF}
 393 .if exists(${KERNCONFDIR}/${_kernel})
 394 BUILDKERNELS+=  ${_kernel}
 395 .if empty(INSTALLKERNEL)
 396 INSTALLKERNEL= ${_kernel}
 397 .endif
 398 .endif
 399 .endfor
 400
 401 #
 402 # buildkernel
 403 #
 404 # Builds all kernels defined by BUILDKERNELS.
 405 #
 406 buildkernel:
 407 .if empty(BUILDKERNELS)
 408         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 409         @false
 410 .endif
 411 .if defined(KERNWARN)
 412         @echo "--------------------------------------------------------------"
 413         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 414         @echo "--------------------------------------------------------------"
 415         @sleep 3
 416 .endif
 417         @echo
 418 .for _kernel in ${BUILDKERNELS}
 419         @echo "--------------------------------------------------------------"
 420         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 421         @echo "--------------------------------------------------------------"
 422         @echo "===> ${_kernel}"
 423         mkdir -p ${KRNLOBJDIR}
 424 .if !defined(NO_KERNELCONFIG)
 425         cd ${KRNLCONFDIR}; \
 426                 PATH=${TMPPATH} \
 427                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 428                         ${KERNCONFDIR}/${_kernel}
 429 .endif
 430 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 431 .if defined(MODULES_WITH_WORLD) || defined(NO_MODULES) || !exists(${KRNLSRCDIR}/modules)
 432         cd ${KRNLOBJDIR}/${_kernel}; \
 433             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean
 434 .else
 435         cd ${KRNLOBJDIR}/${_kernel}; \
 436             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean cleandir
 437 .endif
 438 .endif
 439         cd ${KRNLOBJDIR}/${_kernel}; \
 440                 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
 441                     ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
 442 .if !defined(NO_KERNELDEPEND)
 443         cd ${KRNLOBJDIR}/${_kernel}; \
 444             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 445 .endif
 446         cd ${KRNLOBJDIR}/${_kernel}; \
 447             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 448         @echo "--------------------------------------------------------------"
 449         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 450         @echo "--------------------------------------------------------------"
 451 .endfor
 452
 453 #
 454 # installkernel
 455 #
 456 # Install the kernel defined by INSTALLKERNEL
 457 #
 458 installkernel:
 459         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 460             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
 461 reinstallkernel:
 462         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 463             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
 464
 465 #
 466 # kernel
 467 #
 468 # Short hand for `make buildkernel installkernel'
 469 #
 470 kernel: buildkernel installkernel
 471
 472 #
 473 # update
 474 #
 475 # Update the source tree, by running sup and/or running cvs to update to the
 476 # latest copy.
 477 #
 478 update:
 479 .if defined(SUP_UPDATE)
 480         @echo "--------------------------------------------------------------"
 481         @echo ">>> Running ${SUP}"
 482         @echo "--------------------------------------------------------------"
 483 .if defined(SUPFILE)
 484         @${SUP} ${SUPFLAGS} ${SUPFILE}
 485 .endif
 486 .if defined(SUPFILE1)
 487         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 488 .endif
 489 .if defined(SUPFILE2)
 490         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 491 .endif
 492 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 493         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 494 .endif
 495 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 496         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 497 .endif
 498 .endif
 499 .if defined(CVS_UPDATE)
 500         @echo "--------------------------------------------------------------"
 501         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 502         @echo "--------------------------------------------------------------"
 503         cd ${.CURDIR}; ${CVS} -q update -A -P -d
 504 .endif
 505
 506 #
 507 # most
 508 #
 509 # Build most of the user binaries on the existing system libs and includes.
 510 #
 511 most:
 512         @echo "--------------------------------------------------------------"
 513         @echo ">>> Building programs only"
 514         @echo "--------------------------------------------------------------"
 515         cd ${.CURDIR}/bin;              ${MAKE} all
 516         cd ${.CURDIR}/sbin;             ${MAKE} all
 517         cd ${.CURDIR}/libexec;          ${MAKE} all
 518         cd ${.CURDIR}/usr.bin;          ${MAKE} all
 519         cd ${.CURDIR}/usr.sbin;         ${MAKE} all
 520         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} all
 521         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} all
 522
 523 #
 524 # installmost
 525 #
 526 # Install the binaries built by the 'most' target.  This does not include
 527 # libraries or include files.
 528 #
 529 installmost:
 530         @echo "--------------------------------------------------------------"
 531         @echo ">>> Installing programs only"
 532         @echo "--------------------------------------------------------------"
 533         cd ${.CURDIR}/bin;              ${MAKE} install
 534         cd ${.CURDIR}/sbin;             ${MAKE} install
 535         cd ${.CURDIR}/libexec;          ${MAKE} install
 536         cd ${.CURDIR}/usr.bin;          ${MAKE} install
 537         cd ${.CURDIR}/usr.sbin;         ${MAKE} install
 538         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} install
 539         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} install
 540
 541 #
 542 # ------------------------------------------------------------------------
 543 #
 544 # From here onwards are utility targets used by the 'make world' and
 545 # related targets.  If your 'world' breaks, you may like to try to fix
 546 # the problem and manually run the following targets to attempt to
 547 # complete the build.  Beware, this is *not* guaranteed to work, you
 548 # need to have a pretty good grip on the current state of the system
 549 # to attempt to manually finish it.  If in doubt, 'make world' again.
 550 #
 551
 552 #
 553 # bootstrap-tools: Build tools needed for compatibility
 554 #
 555 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 556 _strfile=       games/fortune/strfile
 557 .endif
 558
 559 bootstrap-tools:
 560 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
 561     usr.sbin/config usr.sbin/kbdcontrol \
 562     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
 563         cd ${.CURDIR}/${_tool}; \
 564                 ${MAKE} obj; \
 565                 ${MAKE} depend; \
 566                 ${MAKE} all; \
 567                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 568 .endfor
 569
 570 #
 571 # build-tools: Build special purpose build tools
 572 #
 573 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 574 _games= games/adventure games/hack games/phantasia
 575 .endif
 576
 577 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 578 _share= share/syscons/scrnmaps
 579 .endif
 580
 581 .if !defined(NO_FORTRAN)
 582 _fortran= gnu/usr.bin/cc/f771
 583 .endif
 584
 585 .if !defined(NOPERL) && !defined(NO_PERL)
 586 _perl=  gnu/usr.bin/perl/miniperl
 587 .endif
 588
 589 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
 590     !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 591 _libroken4= kerberosIV/lib/libroken
 592 .endif
 593
 594 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 595     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 596 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 597     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 598 .endif
 599
 600 build-tools:
 601 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
 602     ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
 603     usr.bin/awk usr.bin/file usr.sbin/sysinstall
 604         cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
 605 .endfor
 606
 607 #
 608 # cross-tools: Build cross-building tools
 609 #
 610 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 611 _elf2exe=       usr.sbin/elf2exe
 612 .endif
 613
 614 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 615 _btxld= usr.sbin/btxld
 616 .endif
 617
 618 _xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint
 619
 620 cross-tools:
 621 .for _tool in ${_btxld} ${_elf2exe} \
 622     gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc ${_xlint}
 623         cd ${.CURDIR}/${_tool}; \
 624                 ${MAKE} obj; \
 625                 ${MAKE} depend; \
 626                 ${MAKE} all; \
 627                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 628 .endfor
 629
 630 #
 631 # hierarchy - ensure that all the needed directories are present
 632 #
 633 hierarchy:
 634         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 635
 636 #
 637 # includes - possibly generate and install the include files.
 638 #
 639 includes:
 640         cd ${.CURDIR}/include;                  ${MAKE} -B all install
 641         cd ${.CURDIR}/gnu/include;              ${MAKE} install
 642         cd ${.CURDIR}/gnu/lib/libobjc;          ${MAKE} beforeinstall
 643         cd ${.CURDIR}/gnu/lib/libreadline/readline;     ${MAKE} beforeinstall
 644         cd ${.CURDIR}/gnu/lib/libregex;         ${MAKE} beforeinstall
 645         cd ${.CURDIR}/gnu/lib/libstdc++;        ${MAKE} beforeinstall
 646         cd ${.CURDIR}/gnu/lib/libdialog;        ${MAKE} beforeinstall
 647         cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus;   ${MAKE} beforeinstall
 648 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 649 .if exists(${.CURDIR}/secure/lib/libcrypto)
 650         cd ${.CURDIR}/secure/lib/libcrypto;     ${MAKE} beforeinstall
 651 .endif
 652 .if exists(${.CURDIR}/secure/lib/libssl)
 653         cd ${.CURDIR}/secure/lib/libssl;        ${MAKE} beforeinstall
 654 .endif
 655 .endif
 656 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
 657     defined(MAKE_KERBEROS4)
 658         cd ${.CURDIR}/kerberosIV/lib/libacl;    ${MAKE} beforeinstall
 659         cd ${.CURDIR}/kerberosIV/lib/libkadm;   ${MAKE} beforeinstall
 660         cd ${.CURDIR}/kerberosIV/lib/libkafs;   ${MAKE} beforeinstall
 661         cd ${.CURDIR}/kerberosIV/lib/libkdb;    ${MAKE} beforeinstall
 662         cd ${.CURDIR}/kerberosIV/lib/libkrb;    ${MAKE} beforeinstall
 663         cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
 664 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 665         cd ${.CURDIR}/secure/lib/libtelnet;     ${MAKE} beforeinstall
 666 .else
 667         cd ${.CURDIR}/lib/libtelnet;            ${MAKE} beforeinstall
 668 .endif
 669 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
 670     defined(MAKE_KERBEROS5)
 671         cd ${.CURDIR}/kerberos5/lib/libasn1;            ${MAKE} beforeinstall
 672         cd ${.CURDIR}/kerberos5/lib/libhdb;             ${MAKE} beforeinstall
 673         cd ${.CURDIR}/kerberos5/lib/libkadm5clnt;       ${MAKE} beforeinstall
 674         cd ${.CURDIR}/kerberos5/lib/libkadm5srv;        ${MAKE} beforeinstall
 675         cd ${.CURDIR}/kerberos5/lib/libkafs5;           ${MAKE} beforeinstall
 676         cd ${.CURDIR}/kerberos5/lib/libkrb5;            ${MAKE} beforeinstall
 677         cd ${.CURDIR}/kerberos5/lib/libsl;              ${MAKE} beforeinstall
 678 .endif
 679 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
 680         cd ${.CURDIR}/lib/csu/${MACHINE_ARCH};  ${MAKE} beforeinstall
 681 .endif
 682         cd ${.CURDIR}/gnu/lib/csu;              ${MAKE} beforeinstall
 683         cd ${.CURDIR}/lib/libalias;             ${MAKE} beforeinstall
 684         cd ${.CURDIR}/lib/libatm;               ${MAKE} beforeinstall
 685         cd ${.CURDIR}/lib/libdevstat;           ${MAKE} beforeinstall
 686         cd ${.CURDIR}/lib/libc;                 ${MAKE} beforeinstall
 687         cd ${.CURDIR}/lib/libcalendar;          ${MAKE} beforeinstall
 688         cd ${.CURDIR}/lib/libcam;               ${MAKE} beforeinstall
 689         cd ${.CURDIR}/lib/libdisk;              ${MAKE} beforeinstall
 690         cd ${.CURDIR}/lib/libedit;              ${MAKE} beforeinstall
 691         cd ${.CURDIR}/lib/libfetch;             ${MAKE} beforeinstall
 692         cd ${.CURDIR}/lib/libftpio;             ${MAKE} beforeinstall
 693         cd ${.CURDIR}/lib/libkvm;               ${MAKE} beforeinstall
 694         cd ${.CURDIR}/lib/libmd;                ${MAKE} beforeinstall
 695         cd ${.CURDIR}/lib/libmp;                ${MAKE} beforeinstall
 696         cd ${.CURDIR}/lib/msun;                 ${MAKE} beforeinstall
 697         cd ${.CURDIR}/lib/libncp;               ${MAKE} beforeinstall
 698         cd ${.CURDIR}/lib/libncurses;           ${MAKE} beforeinstall
 699         cd ${.CURDIR}/lib/libnetgraph;          ${MAKE} beforeinstall
 700         cd ${.CURDIR}/lib/libopie;              ${MAKE} beforeinstall
 701         cd ${.CURDIR}/lib/libpcap;              ${MAKE} beforeinstall
 702         cd ${.CURDIR}/lib/libradius;            ${MAKE} beforeinstall
 703         cd ${.CURDIR}/lib/librpcsvc;            ${MAKE} beforeinstall
 704         cd ${.CURDIR}/lib/libpam/libpam;        ${MAKE} beforeinstall
 705         cd ${.CURDIR}/lib/libsbuf;              ${MAKE} beforeinstall
 706         cd ${.CURDIR}/lib/libstand;             ${MAKE} beforeinstall
 707         cd ${.CURDIR}/lib/libtacplus;           ${MAKE} beforeinstall
 708         cd ${.CURDIR}/lib/libcom_err;           ${MAKE} beforeinstall
 709         cd ${.CURDIR}/lib/libutil;              ${MAKE} beforeinstall
 710         cd ${.CURDIR}/lib/libvgl;               ${MAKE} beforeinstall
 711         cd ${.CURDIR}/lib/libwrap;              ${MAKE} beforeinstall
 712         cd ${.CURDIR}/lib/libz;                 ${MAKE} beforeinstall
 713         cd ${.CURDIR}/usr.bin/lex;              ${MAKE} beforeinstall
 714
 715 #
 716 # libraries - build all libraries, and install them under ${DESTDIR}.
 717 #
 718 # The following dependencies exist between the libraries:
 719 #
 720 # lib*: csu libgcc_pic
 721 # libatm: libmd
 722 # libcam: libsbuf
 723 # libcrypt: libmd
 724 # libdevstat: libkvm
 725 # libdialog: libncurses
 726 # libedit: libncurses
 727 # libg++: msun
 728 # libkrb: libcrypt
 729 # libopie: libmd
 730 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
 731 #         librpcsvc libtacplus libutil libz libssh
 732 # libradius: libmd
 733 # libreadline: libncurses
 734 # libssh: libcrypto libz
 735 # libstc++: msun
 736 # libtacplus: libmd
 737 #
 738 # Across directories this comes down to (rougly):
 739 #
 740 # gnu/lib: lib/msun lib/libncurses
 741 # kerberosIV/lib kerberos5/lib: lib/libcrypt
 742 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
 743 #             secure/lib/libssh lib/libz
 744 # secure/lib: secure/lib/libcrypto lib/libmd lib/libz
 745 #
 746 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
 747 _csu=   lib/csu/${MACHINE_ARCH}.pcc
 748 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
 749 _csu=   lib/csu/i386-elf
 750 .else
 751 _csu=   lib/csu/${MACHINE_ARCH}
 752 .endif
 753
 754 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 755 _secure_lib=    secure/lib
 756 .if exists(${.CURDIR}/secure/lib/libcrypto)
 757 _libcrypto=     secure/lib/libcrypto
 758 .endif
 759 .endif
 760
 761 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 762 _kerberosIV_lib=        kerberosIV/lib
 763 .endif
 764
 765 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 766 _kerberos5_lib= kerberos5/lib
 767 .endif
 768
 769 .if ${MACHINE_ARCH} == "i386"
 770 _libkeycap=     usr.sbin/pcvt/keycap
 771 .endif
 772
 773 .if !defined(NOPERL) && !defined(NO_PERL)
 774 _libperl=       gnu/usr.bin/perl/libperl
 775 .endif
 776
 777 libraries:
 778 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
 779     lib/libz ${_libcrypto} ${_secure_lib} ${_kerberosIV_lib} \
 780     ${_kerberos5_lib} lib/libcom_err lib/libkvm lib/msun lib/libncurses \
 781     lib/libopie lib/libradius lib/librpcsvc lib/libsbuf lib/libtacplus \
 782     lib/libutil lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
 783 .if exists(${.CURDIR}/${_lib})
 784         cd ${.CURDIR}/${_lib}; \
 785                 ${MAKE} depend; \
 786                 ${MAKE} all; \
 787                 ${MAKE} install
 788 .endif
 789 .endfor
 790
 791 .for __target in clean cleandepend cleandir depend obj
 792 .for entry in ${SUBDIR}
 793 ${entry}.${__target}__D: .PHONY
 794         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 795                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 796                 edir=${entry}.${MACHINE_ARCH}; \
 797                 cd ${.CURDIR}/$${edir}; \
 798         else \
 799                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 800                 edir=${entry}; \
 801                 cd ${.CURDIR}/$${edir}; \
 802         fi; \
 803         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 804 .endfor
 805 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 806 .endfor
 807
 808 .include <bsd.subdir.mk>