Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DNO_KERBEROS Do not build Heimdal (Kerberos 5)
   6 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   7 #       -DNOCLEAN do not clean at all
   8 #       -DNOCRYPT will prevent building of crypt versions
   9 #       -DNOMAN do not build the manual pages
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNORESCUE do not build rescue binaries
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24
  25 #
  26 # The intended user-driven targets are:
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # installworld- install everything built by "buildworld"
  29 # update      - convenient way to update your source tree (eg: sup/cvs)
  30 # most        - build user commands, no libraries or include files
  31 # installmost - install user commands, no libraries or include files
  32 #
  33 # Standard targets (not defined here) are documented in the makefiles in
  34 # /usr/share/mk.  These include:
  35 #               obj depend all install clean cleandepend cleanobj
  36
  37 # Put initial settings here.
  38 SUBDIR=
  39
  40 # We must do share/info early so that installation of info `dir'
  41 # entries works correctly.  Do it first since it is less likely to
  42 # grow dependencies on include and lib than vice versa.
  43 .if exists(${.CURDIR}/share/info)
  44 SUBDIR+= share/info
  45 .endif
  46
  47 .if exists(${.CURDIR}/include)
  48 SUBDIR+= include
  49 .endif
  50 .if exists(${.CURDIR}/lib)
  51 SUBDIR+= lib
  52 .endif
  53
  54 .if exists(${.CURDIR}/bin)
  55 SUBDIR+= bin
  56 .endif
  57 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  58 SUBDIR+= games
  59 .endif
  60 .if exists(${.CURDIR}/gnu)
  61 SUBDIR+= gnu
  62 .endif
  63 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  64     !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
  65 SUBDIR+= kerberos5
  66 .endif
  67 .if exists(${.CURDIR}/libexec)
  68 SUBDIR+= libexec
  69 .endif
  70 .if exists(${.CURDIR}/rescue) && !defined(NORESCUE)
  71 SUBDIR+= rescue
  72 .endif
  73 .if exists(${.CURDIR}/sbin)
  74 SUBDIR+= sbin
  75 .endif
  76 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
  77 SUBDIR+= secure
  78 .endif
  79 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  80 SUBDIR+= share
  81 .endif
  82 .if exists(${.CURDIR}/sys)
  83 SUBDIR+= sys
  84 .endif
  85 .if exists(${.CURDIR}/usr.bin)
  86 SUBDIR+= usr.bin
  87 .endif
  88 .if exists(${.CURDIR}/usr.sbin)
  89 SUBDIR+= usr.sbin
  90 .endif
  91
  92 # etc must be last for "distribute" to work
  93 .if exists(${.CURDIR}/etc)
  94 SUBDIR+= etc
  95 .endif
  96
  97 # These are last, since it is nice to at least get the base system
  98 # rebuilt before you do them.
  99 .if defined(LOCAL_DIRS)
 100 .for _DIR in ${LOCAL_DIRS}
 101 .if exists(${.CURDIR}/${_DIR}) && exists(${.CURDIR}/${_DIR}/Makefile)
 102 SUBDIR+= ${_DIR}
 103 .endif
 104 .endfor
 105 .endif
 106
 107 .if defined(SUBDIR_OVERRIDE)
 108 SUBDIR=         ${SUBDIR_OVERRIDE}
 109 .endif
 110
 111 .if defined(NOCLEANDIR)
 112 CLEANDIR=       clean cleandepend
 113 .else
 114 CLEANDIR=       cleandir
 115 .endif
 116
 117 CVS?=           cvs
 118 SUP?=           /usr/local/bin/cvsup
 119 SUPFLAGS?=      -g -L 2 -P -
 120 .if defined(SUPHOST)
 121 SUPFLAGS+=      -h ${SUPHOST}
 122 .endif
 123
 124 MAKEOBJDIRPREFIX?=      /usr/obj
 125 .if !defined(OSRELDATE)
 126 OSRELDATE!=     awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
 127                 /usr/include/osreldate.h
 128 .endif
 129 TARGET_ARCH?=   ${MACHINE_ARCH}
 130 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 131 TARGET?=        ${MACHINE}
 132 TARGET_CPUTYPE?=${CPUTYPE}
 133 .else
 134 TARGET?=        ${TARGET_ARCH}
 135 TARGET_CPUTYPE?=
 136 .endif
 137 .if !empty(TARGET_CPUTYPE)
 138 _TARGET_CPUTYPE=${TARGET_CPUTYPE}
 139 .else
 140 _TARGET_CPUTYPE=dummy
 141 .endif
 142 _CPUTYPE!=      ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \
 143                 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE
 144 .if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
 145 .error CPUTYPE global should be set with ?=.
 146 .endif
 147 .if make(buildworld)
 148 BUILD_ARCH!=    sysctl -n hw.machine_arch
 149 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 150 .error To cross-build, set TARGET_ARCH.
 151 .endif
 152 .endif
 153 .if ${MACHINE} == ${TARGET}
 154 OBJTREE=        ${MAKEOBJDIRPREFIX}
 155 .else
 156 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET}
 157 .endif
 158 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 159 # /usr/games added for fortune which depend on strfile
 160 BPATH=          ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
 161 XPATH=          ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 162 STRICTTMPPATH=  ${BPATH}:${XPATH}
 163 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 164
 165 INSTALLTMP!=    /usr/bin/mktemp -d -u -t install
 166
 167 #
 168 # Building a world goes through the following stages
 169 #
 170 # 1. legacy stage [BMAKE]
 171 #       This stage is responsible for creating compatibility
 172 #       shims that are needed by the bootstrap-tools,
 173 #       build-tools and cross-tools stages.
 174 # 1. bootstrap-tools stage [BMAKE]
 175 #       This stage is responsible for creating programs that
 176 #       are needed for backward compatibility reasons. They
 177 #       are not built as cross-tools.
 178 # 2. build-tools stage [TMAKE]
 179 #       This stage is responsible for creating the object
 180 #       tree and building any tools that are needed during
 181 #       the build process.
 182 # 3. cross-tools stage [XMAKE]
 183 #       This stage is responsible for creating any tools that
 184 #       are needed for cross-builds. A cross-compiler is one
 185 #       of them.
 186 # 4. world stage [WMAKE]
 187 #       This stage actually builds the world.
 188 # 5. install stage (optional) [IMAKE]
 189 #       This stage installs a previously built world.
 190 #
 191
 192 BOOTSTRAPPING?= 0
 193
 194 # Common environment for world related stages
 195 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 196                 MACHINE_ARCH=${TARGET_ARCH} \
 197                 MACHINE=${TARGET} \
 198                 CPUTYPE=${TARGET_CPUTYPE} \
 199                 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
 200                 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
 201                 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
 202
 203 # bootstrap-tools stage
 204 BMAKEENV=       DESTDIR= \
 205                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 206                 PATH=${BPATH}:${PATH} \
 207                 WORLDTMP=${WORLDTMP} \
 208                 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
 209 BMAKE=          MAKEOBJDIRPREFIX=${WORLDTMP} \
 210                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 211                 BOOTSTRAPPING=${OSRELDATE} \
 212                 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \
 213                 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS
 214
 215 # build-tools stage
 216 TMAKE=          MAKEOBJDIRPREFIX=${OBJTREE} \
 217                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 218                 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS
 219
 220 # cross-tools stage
 221 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 222
 223 # world stage
 224 WMAKEENV=       ${CROSSENV} \
 225                 DESTDIR=${WORLDTMP} \
 226                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 227                 PATH=${TMPPATH}
 228 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 229
 230 # install stage
 231 IMAKEENV=       ${CROSSENV} \
 232                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 233 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 234
 235 # kernel stage
 236 KMAKEENV=       ${WMAKEENV}
 237
 238 #
 239 # buildworld
 240 #
 241 # Attempt to rebuild the entire system, with reasonable chance of
 242 # success, regardless of how old your existing system is.
 243 #
 244 _worldtmp:
 245 .if ${.CURDIR:C/[^,]//g} != ""
 246 #       The m4 build of sendmail files doesn't like it if ',' is used
 247 #       anywhere in the path of it's files.
 248         @echo
 249         @echo "*** Error: path to source tree contains a comma ','"
 250         @echo
 251         @false
 252 .endif
 253         @echo
 254         @echo "--------------------------------------------------------------"
 255         @echo ">>> Rebuilding the temporary build tree"
 256         @echo "--------------------------------------------------------------"
 257 .if !defined(NOCLEAN)
 258         rm -rf ${WORLDTMP}
 259 .else
 260         rm -rf ${WORLDTMP}/legacy/usr/include
 261         # XXX - These two can depend on any header file.
 262         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 263         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 264 .endif
 265 .for _dir in \
 266     usr/bin usr/games usr/include/sys usr/lib \
 267     usr/libexec usr/sbin usr/share/dict \
 268     usr/share/groff_font/devX100 \
 269     usr/share/groff_font/devX100-12 \
 270     usr/share/groff_font/devX75 \
 271     usr/share/groff_font/devX75-12 \
 272     usr/share/groff_font/devascii \
 273     usr/share/groff_font/devcp1047 \
 274     usr/share/groff_font/devdvi \
 275     usr/share/groff_font/devhtml \
 276     usr/share/groff_font/devkoi8-r \
 277     usr/share/groff_font/devlatin1 \
 278     usr/share/groff_font/devlbp \
 279     usr/share/groff_font/devlj4 \
 280     usr/share/groff_font/devps \
 281     usr/share/groff_font/devutf8 \
 282     usr/share/tmac/mdoc usr/share/tmac/mm
 283         mkdir -p ${WORLDTMP}/legacy/${_dir}
 284 .endfor
 285 .for _dir in \
 286     usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \
 287     usr/libexec usr/share/misc
 288         mkdir -p ${WORLDTMP}/${_dir}
 289 .endfor
 290         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
 291             -p ${WORLDTMP}/usr/include
 292         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 293 _legacy:
 294         @echo
 295         @echo "--------------------------------------------------------------"
 296         @echo ">>> stage 1: legacy release compatibility shims"
 297         @echo "--------------------------------------------------------------"
 298         cd ${.CURDIR}; ${BMAKE} legacy
 299 _bootstrap-tools:
 300         @echo
 301         @echo "--------------------------------------------------------------"
 302         @echo ">>> stage 1: bootstrap tools"
 303         @echo "--------------------------------------------------------------"
 304         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 305 _cleanobj:
 306 .if !defined(NOCLEAN)
 307         @echo
 308         @echo "--------------------------------------------------------------"
 309         @echo ">>> stage 2: cleaning up the object tree"
 310         @echo "--------------------------------------------------------------"
 311         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 312 .endif
 313 _obj:
 314         @echo
 315         @echo "--------------------------------------------------------------"
 316         @echo ">>> stage 2: rebuilding the object tree"
 317         @echo "--------------------------------------------------------------"
 318         cd ${.CURDIR}; ${WMAKE} par-obj
 319 _build-tools:
 320         @echo
 321         @echo "--------------------------------------------------------------"
 322         @echo ">>> stage 2: build tools"
 323         @echo "--------------------------------------------------------------"
 324         cd ${.CURDIR}; ${TMAKE} build-tools
 325 _cross-tools:
 326         @echo
 327         @echo "--------------------------------------------------------------"
 328         @echo ">>> stage 3: cross tools"
 329         @echo "--------------------------------------------------------------"
 330         cd ${.CURDIR}; ${XMAKE} cross-tools
 331 _includes:
 332         @echo
 333         @echo "--------------------------------------------------------------"
 334         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 335         @echo "--------------------------------------------------------------"
 336         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 337 _libraries:
 338         @echo
 339         @echo "--------------------------------------------------------------"
 340         @echo ">>> stage 4: building libraries"
 341         @echo "--------------------------------------------------------------"
 342         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 343 _depend:
 344         @echo
 345         @echo "--------------------------------------------------------------"
 346         @echo ">>> stage 4: make dependencies"
 347         @echo "--------------------------------------------------------------"
 348         cd ${.CURDIR}; ${WMAKE} par-depend
 349 everything:
 350         @echo
 351         @echo "--------------------------------------------------------------"
 352         @echo ">>> stage 4: building everything.."
 353         @echo "--------------------------------------------------------------"
 354         cd ${.CURDIR}; ${WMAKE} par-all
 355
 356
 357 WMAKE_TGTS=
 358 .if !defined(SUBDIR_OVERRIDE)
 359 WMAKE_TGTS+=    _worldtmp _legacy _bootstrap-tools
 360 .endif
 361 WMAKE_TGTS+=    _cleanobj _obj _build-tools
 362 .if !defined(SUBDIR_OVERRIDE)
 363 WMAKE_TGTS+=    _cross-tools
 364 .endif
 365 WMAKE_TGTS+=    _includes _libraries _depend everything
 366
 367 buildworld: ${WMAKE_TGTS}
 368 .ORDER: ${WMAKE_TGTS}
 369
 370 #
 371 # installcheck
 372 #
 373 # Checks to be sure system is ready for installworld
 374 #
 375 installcheck:
 376 .if !defined(NO_SENDMAIL)
 377         @if ! `id -u smmsp > /dev/null`; then \
 378                 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
 379                 false; \
 380         fi
 381         @if ! `id -g smmsp > /dev/null`; then \
 382                 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
 383                 false; \
 384         fi
 385 .endif
 386 .if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \
 387     (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/")
 388         @echo "Checking to see if your booted kernel is fresh enough.."
 389         ${.OBJDIR}/bin/sh/sh -c \
 390             'echo "Testing installed kernel for new sigaction(2) syscall"'
 391         @echo "Seems ok.."
 392 .endif
 393
 394 #
 395 # distributeworld
 396 #
 397 # Distributes everything compiled by a `buildworld'.
 398 #
 399 # installworld
 400 #
 401 # Installs everything compiled by a 'buildworld'.
 402 #
 403 distributeworld installworld: installcheck
 404         mkdir -p ${INSTALLTMP}
 405         for prog in [ awk cap_mkdb cat chflags chmod chown \
 406             date echo egrep find grep \
 407             ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
 408             test true uname wc zic; do \
 409                 cp `which $$prog` ${INSTALLTMP}; \
 410         done
 411         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 412         rm -rf ${INSTALLTMP}
 413
 414 #
 415 # reinstall
 416 #
 417 # If you have a build server, you can NFS mount the source and obj directories
 418 # and do a 'make reinstall' on the *client* to install new binaries from the
 419 # most recent server build.
 420 #
 421 reinstall:
 422         @echo "--------------------------------------------------------------"
 423         @echo ">>> Making hierarchy"
 424         @echo "--------------------------------------------------------------"
 425         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 426         @echo
 427         @echo "--------------------------------------------------------------"
 428         @echo ">>> Installing everything.."
 429         @echo "--------------------------------------------------------------"
 430         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 431 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 432         @echo
 433         @echo "--------------------------------------------------------------"
 434         @echo ">>> Rebuilding man page indices"
 435         @echo "--------------------------------------------------------------"
 436         cd ${.CURDIR}/share/man; ${MAKE} makedb
 437 .endif
 438
 439 redistribute:
 440         @echo "--------------------------------------------------------------"
 441         @echo ">>> Distributing everything.."
 442         @echo "--------------------------------------------------------------"
 443         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 444
 445 #
 446 # buildkernel and installkernel
 447 #
 448 # Which kernels to build and/or install is specified by setting
 449 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 450 # Only the existing (depending TARGET) config files are used
 451 # for building kernels and only the first of these is designated
 452 # as the one being installed.
 453 #
 454 # Note that we have to use TARGET instead of TARGET_ARCH when
 455 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 456 # be set to cross-build, we have to make sure TARGET is set
 457 # properly.
 458
 459 .if !defined(KERNCONF) && defined(KERNEL)
 460 KERNCONF=       ${KERNEL}
 461 KERNWARN=       yes
 462 .else
 463 KERNCONF?=      GENERIC
 464 .endif
 465 INSTKERNNAME?=  kernel
 466
 467 KERNSRCDIR?=    ${.CURDIR}/sys
 468 KRNLCONFDIR=    ${KERNSRCDIR}/${TARGET}/conf
 469 KRNLOBJDIR=     ${OBJTREE}${KERNSRCDIR}
 470 KERNCONFDIR?=   ${KRNLCONFDIR}
 471
 472 BUILDKERNELS=
 473 INSTALLKERNEL=
 474 .for _kernel in ${KERNCONF}
 475 .if exists(${KERNCONFDIR}/${_kernel})
 476 BUILDKERNELS+=  ${_kernel}
 477 .if empty(INSTALLKERNEL)
 478 INSTALLKERNEL= ${_kernel}
 479 .endif
 480 .endif
 481 .endfor
 482
 483 #
 484 # buildkernel
 485 #
 486 # Builds all kernels defined by BUILDKERNELS.
 487 #
 488 buildkernel:
 489 .if empty(BUILDKERNELS)
 490         @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF}).";
 491         @false
 492 .endif
 493 .if defined(KERNWARN)
 494         @echo "--------------------------------------------------------------"
 495         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 496         @echo "--------------------------------------------------------------"
 497         @sleep 3
 498 .endif
 499         @echo
 500 .for _kernel in ${BUILDKERNELS}
 501         @echo "--------------------------------------------------------------"
 502         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 503         @echo "--------------------------------------------------------------"
 504         @echo "===> ${_kernel}"
 505         mkdir -p ${KRNLOBJDIR}
 506 .if !defined(NO_KERNELCONFIG)
 507         cd ${KRNLCONFDIR}; \
 508                 PATH=${TMPPATH} \
 509                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 510                         ${KERNCONFDIR}/${_kernel}
 511 .endif
 512 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 513         cd ${KRNLOBJDIR}/${_kernel}; \
 514             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR}
 515 .endif
 516         cd ${KRNLOBJDIR}/${_kernel}; \
 517             MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
 518             ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
 519         cd ${KRNLOBJDIR}/${_kernel}; \
 520             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj
 521 # XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
 522 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
 523 .for target in obj depend all
 524         cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \
 525             MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
 526             ${MAKE} -DNO_CPU_CFLAGS ${target}
 527 .endfor
 528 .endif
 529 .if !defined(NO_KERNELDEPEND)
 530         cd ${KRNLOBJDIR}/${_kernel}; \
 531             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ
 532 .endif
 533         cd ${KRNLOBJDIR}/${_kernel}; \
 534             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ
 535         @echo "--------------------------------------------------------------"
 536         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 537         @echo "--------------------------------------------------------------"
 538 .endfor
 539
 540 #
 541 # installkernel
 542 #
 543 # Install the kernel defined by INSTALLKERNEL
 544 #
 545 installkernel reinstallkernel installkernel.debug reinstallkernel.debug:
 546 .if empty(INSTALLKERNEL)
 547         @echo "ERROR: No kernel \"${KERNCONF}\" to install."
 548         @false
 549 .endif
 550         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 551             ${CROSSENV} PATH=${TMPPATH} \
 552             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//}
 553
 554 #
 555 # update
 556 #
 557 # Update the source tree, by running sup and/or running cvs to update to the
 558 # latest copy.
 559 #
 560 update:
 561 .if defined(SUP_UPDATE)
 562         @echo "--------------------------------------------------------------"
 563         @echo ">>> Running ${SUP}"
 564         @echo "--------------------------------------------------------------"
 565 .if defined(SUPFILE)
 566         @${SUP} ${SUPFLAGS} ${SUPFILE}
 567 .endif
 568 .if defined(SUPFILE1)
 569         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 570 .endif
 571 .if defined(SUPFILE2)
 572         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 573 .endif
 574 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 575         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 576 .endif
 577 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 578         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 579 .endif
 580 .endif
 581 .if defined(CVS_UPDATE)
 582         @echo "--------------------------------------------------------------"
 583         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 584         @echo "--------------------------------------------------------------"
 585         cd ${.CURDIR}; ${CVS} -R -q update -A -P -d
 586 .endif
 587
 588 #
 589 # most
 590 #
 591 # Build most of the user binaries on the existing system libs and includes.
 592 #
 593 most:
 594         @echo "--------------------------------------------------------------"
 595         @echo ">>> Building programs only"
 596         @echo "--------------------------------------------------------------"
 597 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
 598         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 599 .endfor
 600
 601 #
 602 # installmost
 603 #
 604 # Install the binaries built by the 'most' target.  This does not include
 605 # libraries or include files.
 606 #
 607 installmost:
 608         @echo "--------------------------------------------------------------"
 609         @echo ">>> Installing programs only"
 610         @echo "--------------------------------------------------------------"
 611 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
 612         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 613 .endfor
 614
 615 #
 616 # ------------------------------------------------------------------------
 617 #
 618 # From here onwards are utility targets used by the 'make world' and
 619 # related targets.  If your 'world' breaks, you may like to try to fix
 620 # the problem and manually run the following targets to attempt to
 621 # complete the build.  Beware, this is *not* guaranteed to work, you
 622 # need to have a pretty good grip on the current state of the system
 623 # to attempt to manually finish it.  If in doubt, 'make world' again.
 624 #
 625
 626 #
 627 # legacy: Build compatibility shims for the next three targets
 628 #
 629 legacy:
 630 .for _tool in tools/build
 631         @${ECHODIR} "===> ${_tool}"; \
 632             cd ${.CURDIR}/${_tool}; \
 633             ${MAKE} DIRPRFX=${_tool}/ obj; \
 634             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
 635             ${MAKE} DIRPRFX=${_tool}/ depend; \
 636             ${MAKE} DIRPRFX=${_tool}/ all; \
 637             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 638 .endfor
 639
 640 #
 641 # bootstrap-tools: Build tools needed for compatibility
 642 #
 643 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 644 _strfile=       games/fortune/strfile
 645 .endif
 646
 647 .if !defined(NO_CXX)
 648 _gperf= gnu/usr.bin/gperf
 649 .if ${BOOTSTRAPPING} < 500113
 650 _groff=         gnu/usr.bin/groff
 651 .else
 652 _groff=         gnu/usr.bin/groff/tmac
 653 .endif
 654 .endif
 655
 656 .if ${BOOTSTRAPPING} < 450005 || \
 657     ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034
 658 _uudecode=      usr.bin/uudecode
 659 .endif
 660
 661 .if ${BOOTSTRAPPING} < 430002 || \
 662     ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019
 663 _xargs=         usr.bin/xargs
 664 .endif
 665
 666 .if ${BOOTSTRAPPING} < 430002 || \
 667     ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018
 668 _yacc=          usr.bin/yacc
 669 .endif
 670
 671 .if !defined(NORESCUE) && \
 672     ${BOOTSTRAPPING} < 501100
 673 _crunchgen=     usr.sbin/crunch/crunchgen
 674 .endif
 675
 676 .if ${BOOTSTRAPPING} < 500019
 677 _kbdcontrol=    usr.sbin/kbdcontrol
 678 .endif
 679
 680 bootstrap-tools:
 681 .for _tool in \
 682     ${_strfile} \
 683     ${_gperf} \
 684     ${_groff} \
 685     gnu/usr.bin/texinfo \
 686     usr.bin/colldef \
 687     usr.bin/makewhatis \
 688     usr.bin/rpcgen \
 689     ${_uudecode} \
 690     ${_xargs} \
 691     usr.bin/xinstall \
 692     ${_yacc} \
 693     usr.sbin/config \
 694     ${_crunchgen} \
 695     ${_kbdcontrol}
 696         @${ECHODIR} "===> ${_tool}"; \
 697                 cd ${.CURDIR}/${_tool}; \
 698                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 699                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 700                 ${MAKE} DIRPRFX=${_tool}/ all; \
 701                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 702 .endfor
 703
 704 #
 705 # build-tools: Build special purpose build tools
 706 #
 707 .if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
 708 _aicasm= sys/modules/aic7xxx/aicasm
 709 .endif
 710
 711 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 712 _share= share/syscons/scrnmaps
 713 .endif
 714
 715 .if !defined(NO_FORTRAN)
 716 _fortran= gnu/usr.bin/cc/f771
 717 .endif
 718
 719 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 720     !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
 721 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 722     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 723 .endif
 724
 725 .if exists(${.CURDIR}/rescue) && !defined(NORESCUE)
 726 _rescue= rescue/rescue
 727 .endif
 728
 729 build-tools:
 730 .for _tool in \
 731     bin/csh \
 732     bin/sh \
 733     ${_rescue} \
 734     gnu/usr.bin/cc/cc_tools \
 735     ${_fortran} \
 736     ${_libkrb5} \
 737     lib/libncurses \
 738     ${_share} \
 739     ${_aicasm} \
 740     usr.bin/awk \
 741     usr.bin/file \
 742     usr.sbin/sysinstall
 743         @${ECHODIR} "===> ${_tool}"; \
 744                 cd ${.CURDIR}/${_tool}; \
 745                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 746                 ${MAKE} DIRPRFX=${_tool}/ build-tools
 747 .endfor
 748
 749 #
 750 # cross-tools: Build cross-building tools
 751 #
 752 .if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
 753     ${BOOTSTRAPPING} < 500037
 754 _elf2aout=      usr.bin/elf2aout
 755 .endif
 756
 757 .if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH}
 758 _btxld=         usr.sbin/btxld
 759 .endif
 760
 761 .if (!defined(NORESCUE) || \
 762     defined(RELEASEDIR)) && \
 763     ( ${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 501101 )
 764 _crunchide=     usr.sbin/crunch/crunchide
 765 .endif
 766
 767 .if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH}
 768 _elf2exe=       usr.sbin/elf2exe
 769 .endif
 770
 771 .if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
 772     defined(RELEASEDIR)
 773 _kgzip=         usr.sbin/kgzip
 774 .endif
 775
 776 cross-tools:
 777 .for _tool in \
 778     gnu/usr.bin/binutils \
 779     gnu/usr.bin/cc \
 780     ${_elf2aout} \
 781     usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \
 782     ${_btxld} \
 783     ${_crunchide} \
 784     ${_elf2exe} \
 785     ${_kgzip}
 786         @${ECHODIR} "===> ${_tool}"; \
 787                 cd ${.CURDIR}/${_tool}; \
 788                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 789                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 790                 ${MAKE} DIRPRFX=${_tool}/ all; \
 791                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
 792 .endfor
 793
 794 #
 795 # hierarchy - ensure that all the needed directories are present
 796 #
 797 hierarchy:
 798         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 799
 800 #
 801 # libraries - build all libraries, and install them under ${DESTDIR}.
 802 #
 803 # The list of libraries with dependents (${_prebuild_libs}) and their
 804 # interdependencies (__L) are built automatically by the
 805 # ${.CURDIR}/tools/make_libdeps.sh script.
 806 #
 807 libraries:
 808         cd ${.CURDIR}; \
 809             ${MAKE} -f Makefile.inc1 _startup_libs; \
 810             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 811             ${MAKE} -f Makefile.inc1 _generic_libs;
 812
 813 # These dependencies are not automatically generated:
 814 #
 815 # gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
 816 # shared libraries for ELF.
 817 #
 818 # lib/libc (libc_pic.a) must be built before lib/libpthread.
 819 #
 820 _startup_libs=  gnu/lib/csu gnu/lib/libgcc
 821 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
 822 _startup_libs+= lib/csu/${MACHINE_ARCH}-elf
 823 .else
 824 _startup_libs+= lib/csu/${MACHINE_ARCH}
 825 .endif
 826
 827 _prebuild_libs=
 828 _generic_libs=  gnu/lib
 829
 830 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 831     !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
 832 _prebuild_libs+=        kerberos5/lib/libasn1
 833 _prebuild_libs+=        kerberos5/lib/libgssapi
 834 _prebuild_libs+=        kerberos5/lib/libkrb5
 835 _prebuild_libs+=        kerberos5/lib/libroken
 836 _generic_libs+= kerberos5/lib
 837 .endif
 838
 839 .if !defined(NOLIBPTHREAD)
 840 _prebuild_libs+= lib/libc
 841 .endif
 842 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \
 843                 lib/libkvm lib/libmd \
 844                 lib/libncurses lib/libopie lib/libpam lib/libradius \
 845                 lib/librpcsvc \
 846                 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
 847                 lib/libz lib/msun
 848
 849 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 850 lib/libypclnt__L: lib/librpcsvc__L
 851
 852 _generic_libs+= lib
 853
 854 .if !defined(NOCRYPT)
 855 .if !defined(NO_OPENSSL)
 856 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 857 .if !defined(NO_OPENSSH)
 858 _prebuild_libs+=        secure/lib/libssh
 859 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 860 .endif
 861 .endif
 862 _generic_libs+= secure/lib
 863 .endif
 864
 865 _generic_libs+= usr.bin/lex/lib
 866
 867 .if ${MACHINE_ARCH} == "i386"
 868 _generic_libs+= usr.sbin/pcvt/keycap
 869 .endif
 870
 871 .for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
 872 ${_lib}__L: .PHONY
 873 .if exists(${.CURDIR}/${_lib})
 874         @${ECHODIR} "===> ${_lib}"; \
 875                 cd ${.CURDIR}/${_lib}; \
 876                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 877                 ${MAKE} DIRPRFX=${_lib}/ all; \
 878                 ${MAKE} DIRPRFX=${_lib}/ install
 879 .endif
 880 .endfor
 881
 882 # libpam is special: we need to build static PAM modules before
 883 # static PAM library, and dynamic PAM library before dynamic PAM
 884 # modules.
 885 lib/libpam__L: .PHONY
 886         @${ECHODIR} "===> lib/libpam"; \
 887                 cd ${.CURDIR}/lib/libpam; \
 888                 ${MAKE} DIRPRFX=lib/libpam/ depend; \
 889                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
 890                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
 891
 892 _startup_libs: ${_startup_libs:S/$/__L/}
 893 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 894 _generic_libs: ${_generic_libs:S/$/__L/}
 895
 896 .for __target in all clean cleandepend cleandir depend includes obj
 897 .for entry in ${SUBDIR}
 898 ${entry}.${__target}__D: .PHONY
 899         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 900                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 901                 edir=${entry}.${MACHINE_ARCH}; \
 902                 cd ${.CURDIR}/$${edir}; \
 903         else \
 904                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 905                 edir=${entry}; \
 906                 cd ${.CURDIR}/$${edir}; \
 907         fi; \
 908         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 909 .endfor
 910 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 911 .endfor
 912
 913 .include <bsd.subdir.mk>