Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DMAKE_KERBEROS4 to build KerberosIV
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNOSECURE do not go into secure subdir
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24
  25 #
  26 # The intended user-driven targets are:
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # installworld- install everything built by "buildworld"
  29 # update      - convenient way to update your source tree (eg: sup/cvs)
  30 # most        - build user commands, no libraries or include files
  31 # installmost - install user commands, no libraries or include files
  32 #
  33 # Standard targets (not defined here) are documented in the makefiles in
  34 # /usr/share/mk.  These include:
  35 #               obj depend all install clean cleandepend cleanobj
  36
  37 # Put initial settings here.
  38 SUBDIR=
  39
  40 # We must do share/info early so that installation of info `dir'
  41 # entries works correctly.  Do it first since it is less likely to
  42 # grow dependencies on include and lib than vice versa.
  43 .if exists(${.CURDIR}/share/info)
  44 SUBDIR+= share/info
  45 .endif
  46
  47 # We must do include and lib early so that the perl *.ph generation
  48 # works correctly as it uses the header files installed by this.
  49 .if exists(${.CURDIR}/include)
  50 SUBDIR+= include
  51 .endif
  52 .if exists(${.CURDIR}/lib)
  53 SUBDIR+= lib
  54 .endif
  55
  56 .if exists(${.CURDIR}/bin)
  57 SUBDIR+= bin
  58 .endif
  59 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  60 SUBDIR+= games
  61 .endif
  62 .if exists(${.CURDIR}/gnu)
  63 SUBDIR+= gnu
  64 .endif
  65 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
  66     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
  67 SUBDIR+= kerberosIV
  68 .endif
  69 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  70     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  71 SUBDIR+= kerberos5
  72 .endif
  73 .if exists(${.CURDIR}/libexec)
  74 SUBDIR+= libexec
  75 .endif
  76 .if exists(${.CURDIR}/sbin)
  77 SUBDIR+= sbin
  78 .endif
  79 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
  80 SUBDIR+= secure
  81 .endif
  82 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  83 SUBDIR+= share
  84 .endif
  85 .if exists(${.CURDIR}/sys)
  86 SUBDIR+= sys
  87 .endif
  88 .if exists(${.CURDIR}/usr.bin)
  89 SUBDIR+= usr.bin
  90 .endif
  91 .if exists(${.CURDIR}/usr.sbin)
  92 SUBDIR+= usr.sbin
  93 .endif
  94
  95 # etc must be last for "distribute" to work
  96 .if exists(${.CURDIR}/etc)
  97 SUBDIR+= etc
  98 .endif
  99
 100 # These are last, since it is nice to at least get the base system
 101 # rebuilt before you do them.
 102 .if defined(LOCAL_DIRS)
 103 .for _DIR in ${LOCAL_DIRS}
 104 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 105 SUBDIR+= ${_DIR}
 106 .endif
 107 .endfor
 108 .endif
 109
 110 .if defined(NOCLEANDIR)
 111 CLEANDIR=       clean cleandepend
 112 .else
 113 CLEANDIR=       cleandir
 114 .endif
 115
 116 CVS?=           cvs
 117 SUP?=           /usr/local/bin/cvsup
 118 SUPFLAGS?=      -g -L 2 -P -
 119 .if defined(SUPHOST)
 120 SUPFLAGS+=      -h ${SUPHOST}
 121 .endif
 122
 123 MAKEOBJDIRPREFIX?=      /usr/obj
 124 TARGET_ARCH?=   ${MACHINE_ARCH}
 125 TARGET?=        ${MACHINE}
 126 .if make(buildworld)
 127 BUILD_ARCH!=    sysctl -n hw.machine_arch
 128 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 129 .error To cross-build, set TARGET_ARCH.
 130 .endif
 131 .endif
 132 .if ${MACHINE_ARCH} == ${TARGET_ARCH}
 133 OBJTREE=        ${MAKEOBJDIRPREFIX}
 134 .else
 135 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET_ARCH}
 136 .endif
 137 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 138 # /usr/games added for fortune which depend on strfile
 139 STRICTTMPPATH=  ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 140 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 141 OBJFORMAT_PATH?=        /usr/libexec
 142
 143 INSTALLTMP!=    /usr/bin/mktemp -d -u -t install
 144
 145 #
 146 # Building a world goes through the following stages
 147 #
 148 # 1. bootstrap-tool stage [BMAKE]
 149 #       This stage is responsible for creating programs that
 150 #       are needed for backward compatibility reasons. They
 151 #       are not built as cross-tools.
 152 # 2. build-tool stage [TMAKE]
 153 #       This stage is responsible for creating the object
 154 #       tree and building any tools that are needed during
 155 #       the build process.
 156 # 3. cross-tool stage [XMAKE]
 157 #       This stage is responsible for creating any tools that
 158 #       are needed for cross-builds. A cross-compiler is one
 159 #       of them.
 160 # 4. world stage [WMAKE]
 161 #       This stage actually builds the world.
 162 # 5. install stage (optional) [IMAKE]
 163 #       This stage installs a previously built world.
 164 #
 165
 166 # Common environment for world related stages
 167 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 168                 MACHINE_ARCH=${TARGET_ARCH} \
 169                 MACHINE=${TARGET} \
 170                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
 171                 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0 \
 172                 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
 173                 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
 174                 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
 175
 176 # bootstrap-tool stage
 177 BMAKEENV=       MAKEOBJDIRPREFIX=${WORLDTMP} \
 178                 DESTDIR= \
 179                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 180 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 181                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 182                 -DNO_WERROR
 183
 184 # build-tool stage
 185 TMAKEENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 186                 DESTDIR= \
 187                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 188 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
 189
 190 # cross-tool stage
 191 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 192
 193 # world stage
 194 WMAKEENV=       ${CROSSENV} \
 195                 DESTDIR=${WORLDTMP} \
 196                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 197                 PATH=${TMPPATH}
 198 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 199
 200 # install stage
 201 IMAKEENV=       ${CROSSENV} \
 202                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 203 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 204
 205 # kernel stage
 206 KMAKEENV=       ${WMAKEENV} \
 207                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
 208
 209 USRDIRS=        usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
 210                 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
 211                 usr/share/dict \
 212                 usr/share/groff_font/devX100 \
 213                 usr/share/groff_font/devX100-12 \
 214                 usr/share/groff_font/devX75 \
 215                 usr/share/groff_font/devX75-12 \
 216                 usr/share/groff_font/devascii \
 217                 usr/share/groff_font/devcp1047 \
 218                 usr/share/groff_font/devdvi \
 219                 usr/share/groff_font/devhtml \
 220                 usr/share/groff_font/devkoi8-r \
 221                 usr/share/groff_font/devlatin1 \
 222                 usr/share/groff_font/devlbp \
 223                 usr/share/groff_font/devlj4 \
 224                 usr/share/groff_font/devps \
 225                 usr/share/groff_font/devutf8 \
 226                 usr/share/tmac/mdoc usr/share/tmac/mm
 227
 228 INCDIRS=        arpa g++/std isc objc protocols readline rpc rpcsvc openssl \
 229                 security
 230
 231 #
 232 # buildworld
 233 #
 234 # Attempt to rebuild the entire system, with reasonable chance of
 235 # success, regardless of how old your existing system is.
 236 #
 237 buildworld:
 238         @echo
 239         @echo "--------------------------------------------------------------"
 240         @echo ">>> Rebuilding the temporary build tree"
 241         @echo "--------------------------------------------------------------"
 242 .if !defined(NOCLEAN)
 243         rm -rf ${WORLDTMP}
 244 .endif
 245 .for _dir in ${USRDIRS}
 246         mkdir -p ${WORLDTMP}/${_dir}
 247 .endfor
 248 .for _dir in ${INCDIRS}
 249         mkdir -p ${WORLDTMP}/usr/include/${_dir}
 250 .endfor
 251         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 252         @echo
 253         @echo "--------------------------------------------------------------"
 254         @echo ">>> stage 1: bootstrap tools"
 255         @echo "--------------------------------------------------------------"
 256         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 257 .if !defined(NOCLEAN)
 258         @echo
 259         @echo "--------------------------------------------------------------"
 260         @echo ">>> stage 2: cleaning up the object tree"
 261         @echo "--------------------------------------------------------------"
 262         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 263 .endif
 264         @echo
 265         @echo "--------------------------------------------------------------"
 266         @echo ">>> stage 2: rebuilding the object tree"
 267         @echo "--------------------------------------------------------------"
 268         cd ${.CURDIR}; ${WMAKE} par-obj
 269         @echo
 270         @echo "--------------------------------------------------------------"
 271         @echo ">>> stage 2: build tools"
 272         @echo "--------------------------------------------------------------"
 273         cd ${.CURDIR}; ${TMAKE} build-tools
 274         @echo
 275         @echo "--------------------------------------------------------------"
 276         @echo ">>> stage 3: cross tools"
 277         @echo "--------------------------------------------------------------"
 278         cd ${.CURDIR}; ${XMAKE} cross-tools
 279         @echo
 280         @echo "--------------------------------------------------------------"
 281         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 282         @echo "--------------------------------------------------------------"
 283         cd ${.CURDIR}; ${WMAKE} SHARED=copies includes
 284         @echo
 285         @echo "--------------------------------------------------------------"
 286         @echo ">>> stage 4: building libraries"
 287         @echo "--------------------------------------------------------------"
 288         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 289         @echo
 290         @echo "--------------------------------------------------------------"
 291         @echo ">>> stage 4: make dependencies"
 292         @echo "--------------------------------------------------------------"
 293         cd ${.CURDIR}; ${WMAKE} par-depend
 294         @echo
 295         @echo "--------------------------------------------------------------"
 296         @echo ">>> stage 4: building everything.."
 297         @echo "--------------------------------------------------------------"
 298         cd ${.CURDIR}; ${WMAKE} all
 299
 300 everything:
 301         @echo "--------------------------------------------------------------"
 302         @echo ">>> Building everything.."
 303         @echo "--------------------------------------------------------------"
 304         cd ${.CURDIR}; ${WMAKE} all
 305
 306 #
 307 # installworld
 308 #
 309 # Installs everything compiled by a 'buildworld'.
 310 #
 311 installworld:
 312         mkdir -p ${INSTALLTMP}
 313         for prog in [ awk cat chflags chmod chown date echo egrep find grep \
 314             ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
 315             test true uname wc zic; do \
 316                 cp `which $$prog` ${INSTALLTMP}; \
 317         done
 318         cd ${.CURDIR}; ${IMAKE} reinstall
 319         rm -rf ${INSTALLTMP}
 320
 321 #
 322 # reinstall
 323 #
 324 # If you have a build server, you can NFS mount the source and obj directories
 325 # and do a 'make reinstall' on the *client* to install new binaries from the
 326 # most recent server build.
 327 #
 328 reinstall:
 329         @echo "--------------------------------------------------------------"
 330         @echo ">>> Making hierarchy"
 331         @echo "--------------------------------------------------------------"
 332         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 333         @echo
 334         @echo "--------------------------------------------------------------"
 335         @echo ">>> Installing everything.."
 336         @echo "--------------------------------------------------------------"
 337         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 338 .if !defined(NOMAN)
 339         @echo
 340         @echo "--------------------------------------------------------------"
 341         @echo ">>> Rebuilding man page indices"
 342         @echo "--------------------------------------------------------------"
 343         cd ${.CURDIR}/share/man; ${MAKE} makedb
 344 .endif
 345
 346 #
 347 # distribworld
 348 #
 349 # Front-end to distribute to make sure the search path contains
 350 # the object directory. Needed for miniperl.
 351 #
 352 distribworld:
 353         cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
 354
 355 #
 356 # buildkernel and installkernel
 357 #
 358 # Which kernels to build and/or install is specified by setting
 359 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 360 # Only the existing (depending TARGET) config files are used
 361 # for building kernels and only the first of these is designated
 362 # as the one being installed.
 363 #
 364 # Note that we have to use TARGET instead of TARGET_ARCH when
 365 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 366 # be set to cross-build, we have to make sure TARGET is set
 367 # properly.
 368
 369 .if !defined(KERNCONF) && defined(KERNEL)
 370 KERNCONF=       ${KERNEL}
 371 KERNWARN=       yes
 372 .else
 373 KERNCONF?=      GENERIC
 374 .endif
 375 INSTKERNNAME?=  kernel
 376
 377 # The only exotic TARGET_ARCH/TARGET combination valid at this
 378 # time is i386/pc98. In all other cases set TARGET equal to
 379 # TARGET_ARCH.
 380 .if ${TARGET_ARCH} != "i386" || ${TARGET} != "pc98"
 381 TARGET=         ${TARGET_ARCH}
 382 .endif
 383
 384 KRNLSRCDIR=     ${.CURDIR}/sys
 385 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 386 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 387 KERNCONFDIR?=   ${KRNLCONFDIR}
 388
 389 BUILDKERNELS=
 390 INSTALLKERNEL=
 391 .for _kernel in ${KERNCONF}
 392 .if exists(${KERNCONFDIR}/${_kernel})
 393 BUILDKERNELS+=  ${_kernel}
 394 .if empty(INSTALLKERNEL)
 395 INSTALLKERNEL= ${_kernel}
 396 .endif
 397 .endif
 398 .endfor
 399
 400 #
 401 # buildkernel
 402 #
 403 # Builds all kernels defined by BUILDKERNELS.
 404 #
 405 buildkernel:
 406 .if empty(BUILDKERNELS)
 407         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 408         @false
 409 .endif
 410 .if defined(KERNWARN)
 411         @echo "--------------------------------------------------------------"
 412         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 413         @echo "--------------------------------------------------------------"
 414         @sleep 3
 415 .endif
 416         @echo
 417 .for _kernel in ${BUILDKERNELS}
 418         @echo "--------------------------------------------------------------"
 419         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 420         @echo "--------------------------------------------------------------"
 421         @echo "===> ${_kernel}"
 422         mkdir -p ${KRNLOBJDIR}
 423 .if !defined(NO_KERNELCONFIG)
 424         cd ${KRNLCONFDIR}; \
 425                 PATH=${TMPPATH} \
 426                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 427                         ${KERNCONFDIR}/${_kernel}
 428 .endif
 429 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 430 .if defined(MODULES_WITH_WORLD) || defined(NO_MODULES) || !exists(${KRNLSRCDIR}/modules)
 431         cd ${KRNLOBJDIR}/${_kernel}; \
 432             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean
 433 .else
 434         cd ${KRNLOBJDIR}/${_kernel}; \
 435             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean cleandir
 436 .endif
 437 .endif
 438         cd ${KRNLOBJDIR}/${_kernel}; \
 439                 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
 440                     ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
 441 .if !defined(NO_KERNELDEPEND)
 442         cd ${KRNLOBJDIR}/${_kernel}; \
 443             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 444 .endif
 445         cd ${KRNLOBJDIR}/${_kernel}; \
 446             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 447         @echo "--------------------------------------------------------------"
 448         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 449         @echo "--------------------------------------------------------------"
 450 .endfor
 451
 452 #
 453 # installkernel
 454 #
 455 # Install the kernel defined by INSTALLKERNEL
 456 #
 457 installkernel:
 458         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 459             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
 460 reinstallkernel:
 461         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 462             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
 463
 464 #
 465 # kernel
 466 #
 467 # Short hand for `make buildkernel installkernel'
 468 #
 469 kernel: buildkernel installkernel
 470
 471 #
 472 # update
 473 #
 474 # Update the source tree, by running sup and/or running cvs to update to the
 475 # latest copy.
 476 #
 477 update:
 478 .if defined(SUP_UPDATE)
 479         @echo "--------------------------------------------------------------"
 480         @echo ">>> Running ${SUP}"
 481         @echo "--------------------------------------------------------------"
 482 .if defined(SUPFILE)
 483         @${SUP} ${SUPFLAGS} ${SUPFILE}
 484 .endif
 485 .if defined(SUPFILE1)
 486         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 487 .endif
 488 .if defined(SUPFILE2)
 489         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 490 .endif
 491 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 492         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 493 .endif
 494 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 495         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 496 .endif
 497 .endif
 498 .if defined(CVS_UPDATE)
 499         @echo "--------------------------------------------------------------"
 500         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 501         @echo "--------------------------------------------------------------"
 502         cd ${.CURDIR}; ${CVS} -q update -A -P -d
 503 .endif
 504
 505 #
 506 # most
 507 #
 508 # Build most of the user binaries on the existing system libs and includes.
 509 #
 510 most:
 511         @echo "--------------------------------------------------------------"
 512         @echo ">>> Building programs only"
 513         @echo "--------------------------------------------------------------"
 514         cd ${.CURDIR}/bin;              ${MAKE} all
 515         cd ${.CURDIR}/sbin;             ${MAKE} all
 516         cd ${.CURDIR}/libexec;          ${MAKE} all
 517         cd ${.CURDIR}/usr.bin;          ${MAKE} all
 518         cd ${.CURDIR}/usr.sbin;         ${MAKE} all
 519         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} all
 520         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} all
 521
 522 #
 523 # installmost
 524 #
 525 # Install the binaries built by the 'most' target.  This does not include
 526 # libraries or include files.
 527 #
 528 installmost:
 529         @echo "--------------------------------------------------------------"
 530         @echo ">>> Installing programs only"
 531         @echo "--------------------------------------------------------------"
 532         cd ${.CURDIR}/bin;              ${MAKE} install
 533         cd ${.CURDIR}/sbin;             ${MAKE} install
 534         cd ${.CURDIR}/libexec;          ${MAKE} install
 535         cd ${.CURDIR}/usr.bin;          ${MAKE} install
 536         cd ${.CURDIR}/usr.sbin;         ${MAKE} install
 537         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} install
 538         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} install
 539
 540 #
 541 # ------------------------------------------------------------------------
 542 #
 543 # From here onwards are utility targets used by the 'make world' and
 544 # related targets.  If your 'world' breaks, you may like to try to fix
 545 # the problem and manually run the following targets to attempt to
 546 # complete the build.  Beware, this is *not* guaranteed to work, you
 547 # need to have a pretty good grip on the current state of the system
 548 # to attempt to manually finish it.  If in doubt, 'make world' again.
 549 #
 550
 551 #
 552 # bootstrap-tools: Build tools needed for compatibility
 553 #
 554 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 555 _strfile=       games/fortune/strfile
 556 .endif
 557
 558 bootstrap-tools:
 559 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
 560     usr.sbin/config usr.sbin/kbdcontrol \
 561     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
 562         cd ${.CURDIR}/${_tool}; \
 563                 ${MAKE} obj; \
 564                 ${MAKE} depend; \
 565                 ${MAKE} all; \
 566                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 567 .endfor
 568
 569 #
 570 # build-tools: Build special purpose build tools
 571 #
 572 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 573 _games= games/adventure games/hack games/phantasia
 574 .endif
 575
 576 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 577 _share= share/syscons/scrnmaps
 578 .endif
 579
 580 .if !defined(NO_FORTRAN)
 581 _fortran= gnu/usr.bin/cc/f771
 582 .endif
 583
 584 .if !defined(NOPERL)
 585 _perl=  gnu/usr.bin/perl/miniperl
 586 .endif
 587
 588 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
 589     !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 590 _libroken4= kerberosIV/lib/libroken
 591 .endif
 592
 593 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 594     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 595 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 596     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 597 .endif
 598
 599 build-tools:
 600 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
 601     ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
 602     usr.bin/awk usr.bin/file usr.sbin/sysinstall
 603         cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
 604 .endfor
 605
 606 #
 607 # cross-tools: Build cross-building tools
 608 #
 609 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 610 _elf2exe=       usr.sbin/elf2exe
 611 .endif
 612
 613 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 614 _btxld= usr.sbin/btxld
 615 .endif
 616
 617 cross-tools:
 618 .for _tool in ${_btxld} ${_elf2exe} \
 619     gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
 620         cd ${.CURDIR}/${_tool}; \
 621                 ${MAKE} obj; \
 622                 ${MAKE} depend; \
 623                 ${MAKE} all; \
 624                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 625 .endfor
 626
 627 #
 628 # hierarchy - ensure that all the needed directories are present
 629 #
 630 hierarchy:
 631         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 632
 633 #
 634 # includes - possibly generate and install the include files.
 635 #
 636 includes:
 637         cd ${.CURDIR}/include;                  ${MAKE} -B all install
 638         cd ${.CURDIR}/gnu/include;              ${MAKE} install
 639         cd ${.CURDIR}/gnu/lib/libobjc;          ${MAKE} beforeinstall
 640         cd ${.CURDIR}/gnu/lib/libreadline/readline;     ${MAKE} beforeinstall
 641         cd ${.CURDIR}/gnu/lib/libregex;         ${MAKE} beforeinstall
 642         cd ${.CURDIR}/gnu/lib/libstdc++;        ${MAKE} beforeinstall
 643         cd ${.CURDIR}/gnu/lib/libdialog;        ${MAKE} beforeinstall
 644         cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus;   ${MAKE} beforeinstall
 645 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 646 .if exists(${.CURDIR}/secure/lib/libcrypto)
 647         cd ${.CURDIR}/secure/lib/libcrypto;     ${MAKE} beforeinstall
 648 .endif
 649 .if exists(${.CURDIR}/secure/lib/libssl)
 650         cd ${.CURDIR}/secure/lib/libssl;        ${MAKE} beforeinstall
 651 .endif
 652 .endif
 653 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
 654     defined(MAKE_KERBEROS4)
 655         cd ${.CURDIR}/kerberosIV/lib/libacl;    ${MAKE} beforeinstall
 656         cd ${.CURDIR}/kerberosIV/lib/libkadm;   ${MAKE} beforeinstall
 657         cd ${.CURDIR}/kerberosIV/lib/libkafs;   ${MAKE} beforeinstall
 658         cd ${.CURDIR}/kerberosIV/lib/libkdb;    ${MAKE} beforeinstall
 659         cd ${.CURDIR}/kerberosIV/lib/libkrb;    ${MAKE} beforeinstall
 660         cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
 661 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 662         cd ${.CURDIR}/secure/lib/libtelnet;     ${MAKE} beforeinstall
 663 .else
 664         cd ${.CURDIR}/lib/libtelnet;            ${MAKE} beforeinstall
 665 .endif
 666 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
 667     defined(MAKE_KERBEROS5)
 668         cd ${.CURDIR}/kerberos5/lib/libasn1;            ${MAKE} beforeinstall
 669         cd ${.CURDIR}/kerberos5/lib/libhdb;             ${MAKE} beforeinstall
 670         cd ${.CURDIR}/kerberos5/lib/libkadm5clnt;       ${MAKE} beforeinstall
 671         cd ${.CURDIR}/kerberos5/lib/libkadm5srv;        ${MAKE} beforeinstall
 672         cd ${.CURDIR}/kerberos5/lib/libkafs5;           ${MAKE} beforeinstall
 673         cd ${.CURDIR}/kerberos5/lib/libkrb5;            ${MAKE} beforeinstall
 674         cd ${.CURDIR}/kerberos5/lib/libsl;              ${MAKE} beforeinstall
 675 .endif
 676 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
 677         cd ${.CURDIR}/lib/csu/${MACHINE_ARCH};  ${MAKE} beforeinstall
 678 .endif
 679         cd ${.CURDIR}/gnu/lib/csu;              ${MAKE} beforeinstall
 680         cd ${.CURDIR}/lib/libalias;             ${MAKE} beforeinstall
 681         cd ${.CURDIR}/lib/libatm;               ${MAKE} beforeinstall
 682         cd ${.CURDIR}/lib/libdevstat;           ${MAKE} beforeinstall
 683         cd ${.CURDIR}/lib/libc;                 ${MAKE} beforeinstall
 684         cd ${.CURDIR}/lib/libcalendar;          ${MAKE} beforeinstall
 685         cd ${.CURDIR}/lib/libcam;               ${MAKE} beforeinstall
 686         cd ${.CURDIR}/lib/libdisk;              ${MAKE} beforeinstall
 687         cd ${.CURDIR}/lib/libedit;              ${MAKE} beforeinstall
 688         cd ${.CURDIR}/lib/libfetch;             ${MAKE} beforeinstall
 689         cd ${.CURDIR}/lib/libftpio;             ${MAKE} beforeinstall
 690         cd ${.CURDIR}/lib/libkvm;               ${MAKE} beforeinstall
 691         cd ${.CURDIR}/lib/libmd;                ${MAKE} beforeinstall
 692         cd ${.CURDIR}/lib/libmp;                ${MAKE} beforeinstall
 693         cd ${.CURDIR}/lib/msun;                 ${MAKE} beforeinstall
 694         cd ${.CURDIR}/lib/libncp;               ${MAKE} beforeinstall
 695         cd ${.CURDIR}/lib/libncurses;           ${MAKE} beforeinstall
 696         cd ${.CURDIR}/lib/libnetgraph;          ${MAKE} beforeinstall
 697         cd ${.CURDIR}/lib/libopie;              ${MAKE} beforeinstall
 698         cd ${.CURDIR}/lib/libpcap;              ${MAKE} beforeinstall
 699         cd ${.CURDIR}/lib/libradius;            ${MAKE} beforeinstall
 700         cd ${.CURDIR}/lib/librpcsvc;            ${MAKE} beforeinstall
 701         cd ${.CURDIR}/lib/libpam/libpam;        ${MAKE} beforeinstall
 702         cd ${.CURDIR}/lib/libsbuf;              ${MAKE} beforeinstall
 703         cd ${.CURDIR}/lib/libstand;             ${MAKE} beforeinstall
 704         cd ${.CURDIR}/lib/libtacplus;           ${MAKE} beforeinstall
 705         cd ${.CURDIR}/lib/libcom_err;           ${MAKE} beforeinstall
 706         cd ${.CURDIR}/lib/libutil;              ${MAKE} beforeinstall
 707         cd ${.CURDIR}/lib/libvgl;               ${MAKE} beforeinstall
 708         cd ${.CURDIR}/lib/libwrap;              ${MAKE} beforeinstall
 709         cd ${.CURDIR}/lib/libz;                 ${MAKE} beforeinstall
 710         cd ${.CURDIR}/usr.bin/lex;              ${MAKE} beforeinstall
 711
 712 #
 713 # libraries - build all libraries, and install them under ${DESTDIR}.
 714 #
 715 # The following dependencies exist between the libraries:
 716 #
 717 # lib*: csu libgcc_pic
 718 # libatm: libmd
 719 # libcam: libsbuf
 720 # libcrypt: libmd
 721 # libdevstat: libkvm
 722 # libdialog: libncurses
 723 # libedit: libncurses
 724 # libg++: msun
 725 # libkrb: libcrypt
 726 # libopie: libmd
 727 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
 728 #         librpcsvc libtacplus libutil libz libssh
 729 # libradius: libmd
 730 # libreadline: libncurses
 731 # libssh: libcrypto libz
 732 # libstc++: msun
 733 # libtacplus: libmd
 734 #
 735 # Across directories this comes down to (rougly):
 736 #
 737 # gnu/lib: lib/msun lib/libncurses
 738 # kerberosIV/lib kerberos5/lib: lib/libcrypt
 739 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
 740 #             secure/lib/libssh lib/libz
 741 # secure/lib: secure/lib/libcrypto lib/libmd lib/libz
 742 #
 743 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
 744 _csu=   lib/csu/${MACHINE_ARCH}.pcc
 745 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
 746 _csu=   lib/csu/i386-elf
 747 .else
 748 _csu=   lib/csu/${MACHINE_ARCH}
 749 .endif
 750
 751 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 752 _secure_lib=    secure/lib
 753 .if exists(${.CURDIR}/secure/lib/libcrypto)
 754 _libcrypto=     secure/lib/libcrypto
 755 .endif
 756 .endif
 757
 758 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 759 _kerberosIV_lib=        kerberosIV/lib
 760 .endif
 761
 762 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 763 _kerberos5_lib= kerberos5/lib
 764 .endif
 765
 766 .if ${MACHINE_ARCH} == "i386"
 767 _libkeycap=     usr.sbin/pcvt/keycap
 768 .endif
 769
 770 .if !defined(NOPERL)
 771 _libperl=       gnu/usr.bin/perl/libperl
 772 .endif
 773
 774 libraries:
 775 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
 776     lib/libz ${_libcrypto} ${_secure_lib} ${_kerberosIV_lib} \
 777     ${_kerberos5_lib} lib/libcom_err lib/libkvm lib/msun lib/libncurses \
 778     lib/libopie lib/libradius lib/librpcsvc lib/libsbuf lib/libtacplus \
 779     lib/libutil lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
 780 .if exists(${.CURDIR}/${_lib})
 781         cd ${.CURDIR}/${_lib}; \
 782                 ${MAKE} depend; \
 783                 ${MAKE} all; \
 784                 ${MAKE} install
 785 .endif
 786 .endfor
 787
 788 .for __target in clean cleandepend cleandir depend obj
 789 .for entry in ${SUBDIR}
 790 ${entry}.${__target}__D: .PHONY
 791         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 792                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 793                 edir=${entry}.${MACHINE_ARCH}; \
 794                 cd ${.CURDIR}/$${edir}; \
 795         else \
 796                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 797                 edir=${entry}; \
 798                 cd ${.CURDIR}/$${edir}; \
 799         fi; \
 800         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 801 .endfor
 802 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 803 .endfor
 804
 805 .include <bsd.subdir.mk>