4 # Make command line options:
5 # -DMAKE_KERBEROS4 to build KerberosIV
6 # -DMAKE_KERBEROS5 to build Kerberos5
7 # -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8 # -DNOCLEAN do not clean at all
9 # -DNOCRYPT will prevent building of crypt versions
10 # -DNOPROFILE do not build profiled libraries
11 # -DNOSECURE do not go into secure subdir
12 # -DNOGAMES do not go into games subdir
13 # -DNOSHARE do not go into share subdir
14 # -DNOINFO do not make or install info files
15 # -DNOLIBC_R do not build libc_r.
16 # -DNO_FORTRAN do not build g77 and related libraries.
17 # -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18 # -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19 # -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20 # -DNO_PERL do not build perl5 and related libraries
21 # -DNO_PORTSUPDATE do not update ports in ${MAKE} update
22 # -DNO_DOCUPDATE do not update doc in ${MAKE} update
23 # LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
24 # TARGET_ARCH="arch" to crossbuild world to a different arch
27 # The intended user-driven targets are:
28 # buildworld - rebuild *everything*, including glue to help do upgrades
29 # installworld- install everything built by "buildworld"
30 # update - convenient way to update your source tree (eg: sup/cvs)
31 # most - build user commands, no libraries or include files
32 # installmost - install user commands, no libraries or include files
34 # Standard targets (not defined here) are documented in the makefiles in
35 # /usr/share/mk. These include:
36 # obj depend all install clean cleandepend cleanobj
38 # Put initial settings here.
41 # We must do share/info early so that installation of info `dir'
42 # entries works correctly. Do it first since it is less likely to
43 # grow dependencies on include and lib than vice versa.
44 .if exists(${.CURDIR}/share/info)
48 # We must do include and lib early so that the perl *.ph generation
49 # works correctly as it uses the header files installed by this.
50 .if exists(${.CURDIR}/include)
53 .if exists(${.CURDIR}/lib)
57 .if exists(${.CURDIR}/bin)
60 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
63 .if exists(${.CURDIR}/gnu)
66 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
67 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
70 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
71 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
74 .if exists(${.CURDIR}/libexec)
77 .if exists(${.CURDIR}/sbin)
80 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
83 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
86 .if exists(${.CURDIR}/sys)
89 .if exists(${.CURDIR}/usr.bin)
92 .if exists(${.CURDIR}/usr.sbin)
96 # etc must be last for "distribute" to work
97 .if exists(${.CURDIR}/etc)
101 # These are last, since it is nice to at least get the base system
102 # rebuilt before you do them.
103 .if defined(LOCAL_DIRS)
104 .for _DIR in ${LOCAL_DIRS}
105 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
111 .if defined(NOCLEANDIR)
112 CLEANDIR= clean cleandepend
118 SUP?= /usr/local/bin/cvsup
119 SUPFLAGS?= -g -L 2 -P -
121 SUPFLAGS+= -h ${SUPHOST}
124 MAKEOBJDIRPREFIX?= /usr/obj
125 TARGET_ARCH?= ${MACHINE_ARCH}
126 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
129 TARGET?= ${TARGET_ARCH}
132 BUILD_ARCH!= sysctl -n hw.machine_arch
133 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
134 .error To cross-build, set TARGET_ARCH.
137 .if ${MACHINE} == ${TARGET}
138 OBJTREE= ${MAKEOBJDIRPREFIX}
140 OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET}
142 WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
143 # /usr/games added for fortune which depend on strfile
144 STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
145 TMPPATH= ${STRICTTMPPATH}:${PATH}
146 OBJFORMAT_PATH?= /usr/libexec
148 INSTALLTMP!= /usr/bin/mktemp -d -u -t install
151 # Building a world goes through the following stages
153 # 1. bootstrap-tool stage [BMAKE]
154 # This stage is responsible for creating programs that
155 # are needed for backward compatibility reasons. They
156 # are not built as cross-tools.
157 # 2. build-tool stage [TMAKE]
158 # This stage is responsible for creating the object
159 # tree and building any tools that are needed during
161 # 3. cross-tool stage [XMAKE]
162 # This stage is responsible for creating any tools that
163 # are needed for cross-builds. A cross-compiler is one
165 # 4. world stage [WMAKE]
166 # This stage actually builds the world.
167 # 5. install stage (optional) [IMAKE]
168 # This stage installs a previously built world.
171 # Common environment for world related stages
172 CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
173 MACHINE_ARCH=${TARGET_ARCH} \
175 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
176 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.1 \
177 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
178 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
179 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
181 # bootstrap-tool stage
182 BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
184 INSTALL="sh ${.CURDIR}/tools/install.sh"
185 BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
186 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
190 TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
192 INSTALL="sh ${.CURDIR}/tools/install.sh"
193 TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
196 XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
199 WMAKEENV= ${CROSSENV} \
200 DESTDIR=${WORLDTMP} \
201 INSTALL="sh ${.CURDIR}/tools/install.sh" \
203 WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
206 IMAKEENV= ${CROSSENV} \
207 PATH=${STRICTTMPPATH}:${INSTALLTMP}
208 IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
211 KMAKEENV= ${WMAKEENV} \
212 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
214 USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
215 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
217 usr/share/groff_font/devX100 \
218 usr/share/groff_font/devX100-12 \
219 usr/share/groff_font/devX75 \
220 usr/share/groff_font/devX75-12 \
221 usr/share/groff_font/devascii \
222 usr/share/groff_font/devcp1047 \
223 usr/share/groff_font/devdvi \
224 usr/share/groff_font/devhtml \
225 usr/share/groff_font/devkoi8-r \
226 usr/share/groff_font/devlatin1 \
227 usr/share/groff_font/devlbp \
228 usr/share/groff_font/devlj4 \
229 usr/share/groff_font/devps \
230 usr/share/groff_font/devutf8 \
231 usr/share/tmac/mdoc usr/share/tmac/mm
233 INCDIRS= arpa dev fs g++/std isc isofs objc protocols \
234 readline rpc rpcsvc openssl security ufs
239 # Attempt to rebuild the entire system, with reasonable chance of
240 # success, regardless of how old your existing system is.
244 @echo "--------------------------------------------------------------"
245 @echo ">>> Rebuilding the temporary build tree"
246 @echo "--------------------------------------------------------------"
247 .if !defined(NOCLEAN)
250 # XXX - These two can depend on any header file.
251 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
252 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
254 .for _dir in ${USRDIRS}
255 mkdir -p ${WORLDTMP}/${_dir}
257 .for _dir in ${INCDIRS}
258 mkdir -p ${WORLDTMP}/usr/include/${_dir}
260 ln -sf ${.CURDIR}/sys ${WORLDTMP}
262 @echo "--------------------------------------------------------------"
263 @echo ">>> stage 1: bootstrap tools"
264 @echo "--------------------------------------------------------------"
265 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
266 .if !defined(NOCLEAN)
268 @echo "--------------------------------------------------------------"
269 @echo ">>> stage 2: cleaning up the object tree"
270 @echo "--------------------------------------------------------------"
271 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
274 @echo "--------------------------------------------------------------"
275 @echo ">>> stage 2: rebuilding the object tree"
276 @echo "--------------------------------------------------------------"
277 cd ${.CURDIR}; ${WMAKE} par-obj
279 @echo "--------------------------------------------------------------"
280 @echo ">>> stage 2: build tools"
281 @echo "--------------------------------------------------------------"
282 cd ${.CURDIR}; ${TMAKE} build-tools
284 @echo "--------------------------------------------------------------"
285 @echo ">>> stage 3: cross tools"
286 @echo "--------------------------------------------------------------"
287 cd ${.CURDIR}; ${XMAKE} cross-tools
289 @echo "--------------------------------------------------------------"
290 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
291 @echo "--------------------------------------------------------------"
292 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks includes
294 @echo "--------------------------------------------------------------"
295 @echo ">>> stage 4: building libraries"
296 @echo "--------------------------------------------------------------"
297 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
299 @echo "--------------------------------------------------------------"
300 @echo ">>> stage 4: make dependencies"
301 @echo "--------------------------------------------------------------"
302 cd ${.CURDIR}; ${WMAKE} par-depend
304 @echo "--------------------------------------------------------------"
305 @echo ">>> stage 4: building everything.."
306 @echo "--------------------------------------------------------------"
307 cd ${.CURDIR}; ${WMAKE} all
310 @echo "--------------------------------------------------------------"
311 @echo ">>> Building everything.."
312 @echo "--------------------------------------------------------------"
313 cd ${.CURDIR}; ${WMAKE} all
318 # Installs everything compiled by a 'buildworld'.
321 mkdir -p ${INSTALLTMP}
322 for prog in [ awk cat chflags chmod chown date echo egrep find grep \
323 ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
324 test true uname wc zic; do \
325 cp `which $$prog` ${INSTALLTMP}; \
327 cd ${.CURDIR}; ${IMAKE} reinstall
333 # If you have a build server, you can NFS mount the source and obj directories
334 # and do a 'make reinstall' on the *client* to install new binaries from the
335 # most recent server build.
338 @echo "--------------------------------------------------------------"
339 @echo ">>> Making hierarchy"
340 @echo "--------------------------------------------------------------"
341 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
343 @echo "--------------------------------------------------------------"
344 @echo ">>> Installing everything.."
345 @echo "--------------------------------------------------------------"
346 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
349 @echo "--------------------------------------------------------------"
350 @echo ">>> Rebuilding man page indices"
351 @echo "--------------------------------------------------------------"
352 cd ${.CURDIR}/share/man; ${MAKE} makedb
358 # Front-end to distribute to make sure the search path contains
359 # the object directory. Needed for miniperl.
362 cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
365 # buildkernel and installkernel
367 # Which kernels to build and/or install is specified by setting
368 # KERNCONF. If not defined a GENERIC kernel is built/installed.
369 # Only the existing (depending TARGET) config files are used
370 # for building kernels and only the first of these is designated
371 # as the one being installed.
373 # Note that we have to use TARGET instead of TARGET_ARCH when
374 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
375 # be set to cross-build, we have to make sure TARGET is set
378 .if !defined(KERNCONF) && defined(KERNEL)
384 INSTKERNNAME?= kernel
386 KRNLSRCDIR= ${.CURDIR}/sys
387 KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf
388 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
389 KERNCONFDIR?= ${KRNLCONFDIR}
393 .for _kernel in ${KERNCONF}
394 .if exists(${KERNCONFDIR}/${_kernel})
395 BUILDKERNELS+= ${_kernel}
396 .if empty(INSTALLKERNEL)
397 INSTALLKERNEL= ${_kernel}
405 # Builds all kernels defined by BUILDKERNELS.
408 .if empty(BUILDKERNELS)
409 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
412 .if defined(KERNWARN)
413 @echo "--------------------------------------------------------------"
414 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
415 @echo "--------------------------------------------------------------"
419 .for _kernel in ${BUILDKERNELS}
420 @echo "--------------------------------------------------------------"
421 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
422 @echo "--------------------------------------------------------------"
423 @echo "===> ${_kernel}"
424 mkdir -p ${KRNLOBJDIR}
425 .if !defined(NO_KERNELCONFIG)
428 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
429 ${KERNCONFDIR}/${_kernel}
431 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
432 cd ${KRNLOBJDIR}/${_kernel}; \
433 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
434 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
435 cd ${KRNLOBJDIR}/${_kernel}; \
436 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
439 cd ${KRNLOBJDIR}/${_kernel}; \
440 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
441 ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
442 .if !defined(NO_KERNELDEPEND)
443 cd ${KRNLOBJDIR}/${_kernel}; \
444 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
446 cd ${KRNLOBJDIR}/${_kernel}; \
447 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
448 @echo "--------------------------------------------------------------"
449 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
450 @echo "--------------------------------------------------------------"
456 # Install the kernel defined by INSTALLKERNEL
459 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
460 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
462 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
463 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
468 # Short hand for `make buildkernel installkernel'
470 kernel: buildkernel installkernel
475 # Update the source tree, by running sup and/or running cvs to update to the
479 .if defined(SUP_UPDATE)
480 @echo "--------------------------------------------------------------"
481 @echo ">>> Running ${SUP}"
482 @echo "--------------------------------------------------------------"
484 @${SUP} ${SUPFLAGS} ${SUPFILE}
486 .if defined(SUPFILE1)
487 @${SUP} ${SUPFLAGS} ${SUPFILE1}
489 .if defined(SUPFILE2)
490 @${SUP} ${SUPFLAGS} ${SUPFILE2}
492 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
493 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
495 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
496 @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
499 .if defined(CVS_UPDATE)
500 @echo "--------------------------------------------------------------"
501 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
502 @echo "--------------------------------------------------------------"
503 cd ${.CURDIR}; ${CVS} -q update -A -P -d
509 # Build most of the user binaries on the existing system libs and includes.
512 @echo "--------------------------------------------------------------"
513 @echo ">>> Building programs only"
514 @echo "--------------------------------------------------------------"
515 cd ${.CURDIR}/bin; ${MAKE} all
516 cd ${.CURDIR}/sbin; ${MAKE} all
517 cd ${.CURDIR}/libexec; ${MAKE} all
518 cd ${.CURDIR}/usr.bin; ${MAKE} all
519 cd ${.CURDIR}/usr.sbin; ${MAKE} all
520 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} all
521 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} all
526 # Install the binaries built by the 'most' target. This does not include
527 # libraries or include files.
530 @echo "--------------------------------------------------------------"
531 @echo ">>> Installing programs only"
532 @echo "--------------------------------------------------------------"
533 cd ${.CURDIR}/bin; ${MAKE} install
534 cd ${.CURDIR}/sbin; ${MAKE} install
535 cd ${.CURDIR}/libexec; ${MAKE} install
536 cd ${.CURDIR}/usr.bin; ${MAKE} install
537 cd ${.CURDIR}/usr.sbin; ${MAKE} install
538 cd ${.CURDIR}/gnu/usr.bin; ${MAKE} install
539 cd ${.CURDIR}/gnu/usr.sbin; ${MAKE} install
542 # ------------------------------------------------------------------------
544 # From here onwards are utility targets used by the 'make world' and
545 # related targets. If your 'world' breaks, you may like to try to fix
546 # the problem and manually run the following targets to attempt to
547 # complete the build. Beware, this is *not* guaranteed to work, you
548 # need to have a pretty good grip on the current state of the system
549 # to attempt to manually finish it. If in doubt, 'make world' again.
553 # bootstrap-tools: Build tools needed for compatibility
555 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
556 _strfile= games/fortune/strfile
560 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \
561 usr.bin/xargs usr.bin/xinstall \
562 usr.sbin/config usr.sbin/kbdcontrol \
563 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
564 cd ${.CURDIR}/${_tool}; \
568 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
572 # build-tools: Build special purpose build tools
574 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
575 _games= games/adventure games/hack games/phantasia
578 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
579 _share= share/syscons/scrnmaps
582 .if !defined(NO_FORTRAN)
583 _fortran= gnu/usr.bin/cc/f771
586 .if !defined(NOPERL) && !defined(NO_PERL)
587 _perl= gnu/usr.bin/perl/miniperl
590 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
591 !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
592 _libroken4= kerberosIV/lib/libroken
595 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
596 !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
597 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
598 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
602 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
603 ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
604 usr.bin/awk usr.bin/file usr.sbin/sysinstall
605 cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
609 # cross-tools: Build cross-building tools
611 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
612 _elf2exe= usr.sbin/elf2exe
615 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
616 _btxld= usr.sbin/btxld
619 _xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint
622 .for _tool in ${_btxld} ${_elf2exe} \
623 gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc ${_xlint}
624 cd ${.CURDIR}/${_tool}; \
628 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
632 # hierarchy - ensure that all the needed directories are present
635 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
638 # includes - possibly generate and install the include files.
641 cd ${.CURDIR}/include; ${MAKE} -B all install
642 cd ${.CURDIR}/gnu/include; ${MAKE} install
643 cd ${.CURDIR}/gnu/lib/libobjc; ${MAKE} beforeinstall
644 cd ${.CURDIR}/gnu/lib/libreadline/readline; ${MAKE} beforeinstall
645 cd ${.CURDIR}/gnu/lib/libregex; ${MAKE} beforeinstall
646 cd ${.CURDIR}/gnu/lib/libstdc++; ${MAKE} beforeinstall
647 cd ${.CURDIR}/gnu/lib/libdialog; ${MAKE} beforeinstall
648 cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus; ${MAKE} beforeinstall
649 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
650 .if exists(${.CURDIR}/secure/lib/libcrypto)
651 cd ${.CURDIR}/secure/lib/libcrypto; ${MAKE} beforeinstall
653 .if exists(${.CURDIR}/secure/lib/libssl)
654 cd ${.CURDIR}/secure/lib/libssl; ${MAKE} beforeinstall
657 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
658 defined(MAKE_KERBEROS4)
659 cd ${.CURDIR}/kerberosIV/lib/libacl; ${MAKE} beforeinstall
660 cd ${.CURDIR}/kerberosIV/lib/libkadm; ${MAKE} beforeinstall
661 cd ${.CURDIR}/kerberosIV/lib/libkafs; ${MAKE} beforeinstall
662 cd ${.CURDIR}/kerberosIV/lib/libkdb; ${MAKE} beforeinstall
663 cd ${.CURDIR}/kerberosIV/lib/libkrb; ${MAKE} beforeinstall
664 cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
665 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
666 cd ${.CURDIR}/secure/lib/libtelnet; ${MAKE} beforeinstall
668 cd ${.CURDIR}/lib/libtelnet; ${MAKE} beforeinstall
670 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
671 defined(MAKE_KERBEROS5)
672 cd ${.CURDIR}/kerberos5/lib/libasn1; ${MAKE} beforeinstall
673 cd ${.CURDIR}/kerberos5/lib/libhdb; ${MAKE} beforeinstall
674 cd ${.CURDIR}/kerberos5/lib/libkadm5clnt; ${MAKE} beforeinstall
675 cd ${.CURDIR}/kerberos5/lib/libkadm5srv; ${MAKE} beforeinstall
676 cd ${.CURDIR}/kerberos5/lib/libkafs5; ${MAKE} beforeinstall
677 cd ${.CURDIR}/kerberos5/lib/libkrb5; ${MAKE} beforeinstall
678 cd ${.CURDIR}/kerberos5/lib/libsl; ${MAKE} beforeinstall
680 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
681 cd ${.CURDIR}/lib/csu/${MACHINE_ARCH}; ${MAKE} beforeinstall
683 cd ${.CURDIR}/gnu/lib/csu; ${MAKE} beforeinstall
684 cd ${.CURDIR}/lib/libalias; ${MAKE} beforeinstall
685 cd ${.CURDIR}/lib/libatm; ${MAKE} beforeinstall
686 cd ${.CURDIR}/lib/libdevstat; ${MAKE} beforeinstall
687 cd ${.CURDIR}/lib/libc; ${MAKE} beforeinstall
688 cd ${.CURDIR}/lib/libcalendar; ${MAKE} beforeinstall
689 cd ${.CURDIR}/lib/libcam; ${MAKE} beforeinstall
690 cd ${.CURDIR}/lib/libdisk; ${MAKE} beforeinstall
691 cd ${.CURDIR}/lib/libedit; ${MAKE} beforeinstall
692 cd ${.CURDIR}/lib/libfetch; ${MAKE} beforeinstall
693 cd ${.CURDIR}/lib/libftpio; ${MAKE} beforeinstall
694 cd ${.CURDIR}/lib/libkvm; ${MAKE} beforeinstall
695 cd ${.CURDIR}/lib/libmd; ${MAKE} beforeinstall
696 cd ${.CURDIR}/lib/libmp; ${MAKE} beforeinstall
697 cd ${.CURDIR}/lib/msun; ${MAKE} beforeinstall
698 cd ${.CURDIR}/lib/libncp; ${MAKE} beforeinstall
699 cd ${.CURDIR}/lib/libncurses; ${MAKE} beforeinstall
700 cd ${.CURDIR}/lib/libnetgraph; ${MAKE} beforeinstall
701 cd ${.CURDIR}/lib/libopie; ${MAKE} beforeinstall
702 cd ${.CURDIR}/lib/libpcap; ${MAKE} beforeinstall
703 cd ${.CURDIR}/lib/libradius; ${MAKE} beforeinstall
704 cd ${.CURDIR}/lib/librpcsvc; ${MAKE} beforeinstall
705 cd ${.CURDIR}/lib/libpam/libpam; ${MAKE} beforeinstall
706 cd ${.CURDIR}/lib/libsbuf; ${MAKE} beforeinstall
707 cd ${.CURDIR}/lib/libstand; ${MAKE} beforeinstall
708 cd ${.CURDIR}/lib/libtacplus; ${MAKE} beforeinstall
709 cd ${.CURDIR}/lib/libcom_err; ${MAKE} beforeinstall
710 cd ${.CURDIR}/lib/libusbhid; ${MAKE} beforeinstall
711 cd ${.CURDIR}/lib/libutil; ${MAKE} beforeinstall
712 cd ${.CURDIR}/lib/libvgl; ${MAKE} beforeinstall
713 cd ${.CURDIR}/lib/libwrap; ${MAKE} beforeinstall
714 cd ${.CURDIR}/lib/libypclnt; ${MAKE} beforeinstall
715 cd ${.CURDIR}/lib/libz; ${MAKE} beforeinstall
716 cd ${.CURDIR}/usr.bin/lex; ${MAKE} beforeinstall
719 # libraries - build all libraries, and install them under ${DESTDIR}.
721 # The list of libraries with dependents (${_prebuild_libs}) and their
722 # interdependencies (__L) are built automatically by the
723 # ${.CURDIR}/tools/make_libdeps.sh script.
727 ${MAKE} -f Makefile.inc1 _startup_libs; \
728 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
729 ${MAKE} -f Makefile.inc1 _generic_libs;
731 # These dependencies are not automatically generated:
733 # gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
734 # shared libraries for ELF.
736 _startup_libs= gnu/lib/csu gnu/lib/libgcc
737 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-${OBJFORMAT})
738 _startup_libs+= lib/csu/${MACHINE_ARCH}-${OBJFORMAT}
740 _startup_libs+= lib/csu/${MACHINE_ARCH}
745 _generic_libs= gnu/lib
747 .if !defined(NOPERL) && !defined(NO_PERL)
748 _generic_libs+= gnu/usr.bin/perl/libperl
751 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
752 _prebuild_libs+= kerberos5/lib/libasn1
753 _prebuild_libs+= kerberos5/lib/libgssapi
754 _prebuild_libs+= kerberos5/lib/libkrb5
755 _prebuild_libs+= kerberos5/lib/libroken
756 _generic_libs+= kerberos5/lib
759 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
760 _prebuild_libs+= kerberosIV/lib/libkrb
761 kerberosIV/lib/libkrb__L: lib/libcrypt__L
762 _generic_libs+= kerberosIV/lib
765 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \
766 lib/libncurses lib/libopie lib/libradius lib/librpcsvc \
767 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
770 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
771 lib/libypclnt__L: lib/librpcsvc__L
775 .if !defined(NOCRYPT) && !defined(NOSECURE)
776 _prebuild_libs+= secure/lib/libcrypto
777 .if !defined(NO_OPENSSH)
778 _prebuild_libs+= secure/lib/libssh
779 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
781 _generic_libs+= secure/lib
784 _generic_libs+= usr.bin/lex/lib
786 .if ${MACHINE_ARCH} == "i386"
787 _generic_libs+= usr.sbin/pcvt/keycap
790 .for _lib in ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
792 .if exists(${.CURDIR}/${_lib})
793 cd ${.CURDIR}/${_lib}; \
800 _startup_libs: ${_startup_libs:S/$/__L/}
801 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
802 _generic_libs: ${_generic_libs:S/$/__L/}
804 .for __target in clean cleandepend cleandir depend obj
805 .for entry in ${SUBDIR}
806 ${entry}.${__target}__D: .PHONY
807 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
808 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
809 edir=${entry}.${MACHINE_ARCH}; \
810 cd ${.CURDIR}/$${edir}; \
812 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
814 cd ${.CURDIR}/$${edir}; \
816 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
818 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
821 .include <bsd.subdir.mk>