4 # Make command line options:
5 # -DNO_KERBEROS Do not build Heimdal (Kerberos 5)
6 # -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
7 # -DNOCLEAN do not clean at all
8 # -DNOCRYPT will prevent building of crypt versions
9 # -DNOMAN do not build the manual pages
10 # -DNOPROFILE do not build profiled libraries
11 # -DNORESCUE do not build rescue binaries
12 # -DNOGAMES do not go into games subdir
13 # -DNOSHARE do not go into share subdir
14 # -DNOINFO do not make or install info files
15 # -DNOLIBC_R do not build libc_r.
16 # -DNO_FORTRAN do not build g77 and related libraries.
17 # -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18 # -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19 # -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20 # -DNO_PORTSUPDATE do not update ports in ${MAKE} update
21 # -DNO_DOCUPDATE do not update doc in ${MAKE} update
22 # LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23 # TARGET_ARCH="arch" to crossbuild world to a different arch
26 # The intended user-driven targets are:
27 # buildworld - rebuild *everything*, including glue to help do upgrades
28 # installworld- install everything built by "buildworld"
29 # update - convenient way to update your source tree (eg: sup/cvs)
30 # most - build user commands, no libraries or include files
31 # installmost - install user commands, no libraries or include files
33 # Standard targets (not defined here) are documented in the makefiles in
34 # /usr/share/mk. These include:
35 # obj depend all install clean cleandepend cleanobj
37 # Put initial settings here.
40 # We must do share/info early so that installation of info `dir'
41 # entries works correctly. Do it first since it is less likely to
42 # grow dependencies on include and lib than vice versa.
43 .if exists(${.CURDIR}/share/info)
47 .if exists(${.CURDIR}/include)
50 .if exists(${.CURDIR}/lib)
54 .if exists(${.CURDIR}/bin)
57 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
60 .if exists(${.CURDIR}/gnu)
63 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
67 .if exists(${.CURDIR}/libexec)
70 .if exists(${.CURDIR}/rescue) && !defined(NORESCUE)
73 .if exists(${.CURDIR}/sbin)
76 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
79 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
82 .if exists(${.CURDIR}/sys)
85 .if exists(${.CURDIR}/usr.bin)
88 .if exists(${.CURDIR}/usr.sbin)
92 # etc must be last for "distribute" to work
93 .if exists(${.CURDIR}/etc)
97 # These are last, since it is nice to at least get the base system
98 # rebuilt before you do them.
99 .if defined(LOCAL_DIRS)
100 .for _DIR in ${LOCAL_DIRS}
101 .if exists(${.CURDIR}/${_DIR}) && exists(${.CURDIR}/${_DIR}/Makefile)
107 .if defined(SUBDIR_OVERRIDE)
108 SUBDIR= ${SUBDIR_OVERRIDE}
111 .if defined(NOCLEANDIR)
112 CLEANDIR= clean cleandepend
118 SUP?= /usr/local/bin/cvsup
119 SUPFLAGS?= -g -L 2 -P -
121 SUPFLAGS+= -h ${SUPHOST}
124 MAKEOBJDIRPREFIX?= /usr/obj
125 .if !defined(OSRELDATE)
126 OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
127 /usr/include/osreldate.h
129 TARGET_ARCH?= ${MACHINE_ARCH}
130 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
132 TARGET_CPUTYPE?=${CPUTYPE}
134 TARGET?= ${TARGET_ARCH}
137 .if !empty(TARGET_CPUTYPE)
138 _TARGET_CPUTYPE=${TARGET_CPUTYPE}
140 _TARGET_CPUTYPE=dummy
142 _CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \
143 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE
144 .if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
145 .error CPUTYPE global should be set with ?=.
148 BUILD_ARCH!= sysctl -n hw.machine_arch
149 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
150 .error To cross-build, set TARGET_ARCH.
153 .if ${MACHINE} == ${TARGET}
154 OBJTREE= ${MAKEOBJDIRPREFIX}
156 OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET}
158 WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
159 # /usr/games added for fortune which depend on strfile
160 BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
161 XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
162 STRICTTMPPATH= ${BPATH}:${XPATH}
163 TMPPATH= ${STRICTTMPPATH}:${PATH}
165 INSTALLTMP!= /usr/bin/mktemp -d -u -t install
168 # Building a world goes through the following stages
170 # 1. legacy stage [BMAKE]
171 # This stage is responsible for creating compatibility
172 # shims that are needed by the bootstrap-tools,
173 # build-tools and cross-tools stages.
174 # 1. bootstrap-tools stage [BMAKE]
175 # This stage is responsible for creating programs that
176 # are needed for backward compatibility reasons. They
177 # are not built as cross-tools.
178 # 2. build-tools stage [TMAKE]
179 # This stage is responsible for creating the object
180 # tree and building any tools that are needed during
182 # 3. cross-tools stage [XMAKE]
183 # This stage is responsible for creating any tools that
184 # are needed for cross-builds. A cross-compiler is one
186 # 4. world stage [WMAKE]
187 # This stage actually builds the world.
188 # 5. install stage (optional) [IMAKE]
189 # This stage installs a previously built world.
194 # Common environment for world related stages
195 CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
196 MACHINE_ARCH=${TARGET_ARCH} \
198 CPUTYPE=${TARGET_CPUTYPE} \
199 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
200 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
201 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
203 # bootstrap-tools stage
205 INSTALL="sh ${.CURDIR}/tools/install.sh" \
206 PATH=${BPATH}:${PATH} \
207 WORLDTMP=${WORLDTMP} \
208 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
209 BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \
210 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
211 BOOTSTRAPPING=${OSRELDATE} \
212 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \
213 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS
216 TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \
217 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
218 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS
221 XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
224 WMAKEENV= ${CROSSENV} \
225 DESTDIR=${WORLDTMP} \
226 INSTALL="sh ${.CURDIR}/tools/install.sh" \
228 WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
231 IMAKEENV= ${CROSSENV} \
232 PATH=${STRICTTMPPATH}:${INSTALLTMP}
233 IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
236 KMAKEENV= ${WMAKEENV}
241 # Attempt to rebuild the entire system, with reasonable chance of
242 # success, regardless of how old your existing system is.
245 .if ${.CURDIR:C/[^,]//g} != ""
246 # The m4 build of sendmail files doesn't like it if ',' is used
247 # anywhere in the path of it's files.
249 @echo "*** Error: path to source tree contains a comma ','"
254 @echo "--------------------------------------------------------------"
255 @echo ">>> Rebuilding the temporary build tree"
256 @echo "--------------------------------------------------------------"
257 .if !defined(NOCLEAN)
260 rm -rf ${WORLDTMP}/legacy/usr/include
261 # XXX - These two can depend on any header file.
262 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
263 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
266 usr/bin usr/games usr/include/sys usr/lib \
267 usr/libexec usr/sbin usr/share/dict \
268 usr/share/groff_font/devX100 \
269 usr/share/groff_font/devX100-12 \
270 usr/share/groff_font/devX75 \
271 usr/share/groff_font/devX75-12 \
272 usr/share/groff_font/devascii \
273 usr/share/groff_font/devcp1047 \
274 usr/share/groff_font/devdvi \
275 usr/share/groff_font/devhtml \
276 usr/share/groff_font/devkoi8-r \
277 usr/share/groff_font/devlatin1 \
278 usr/share/groff_font/devlbp \
279 usr/share/groff_font/devlj4 \
280 usr/share/groff_font/devps \
281 usr/share/groff_font/devutf8 \
282 usr/share/tmac/mdoc usr/share/tmac/mm
283 mkdir -p ${WORLDTMP}/legacy/${_dir}
286 usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \
287 usr/libexec usr/share/misc
288 mkdir -p ${WORLDTMP}/${_dir}
290 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
291 -p ${WORLDTMP}/usr/include
292 ln -sf ${.CURDIR}/sys ${WORLDTMP}
295 @echo "--------------------------------------------------------------"
296 @echo ">>> stage 1: legacy release compatibility shims"
297 @echo "--------------------------------------------------------------"
298 cd ${.CURDIR}; ${BMAKE} legacy
301 @echo "--------------------------------------------------------------"
302 @echo ">>> stage 1: bootstrap tools"
303 @echo "--------------------------------------------------------------"
304 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
306 .if !defined(NOCLEAN)
308 @echo "--------------------------------------------------------------"
309 @echo ">>> stage 2: cleaning up the object tree"
310 @echo "--------------------------------------------------------------"
311 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
315 @echo "--------------------------------------------------------------"
316 @echo ">>> stage 2: rebuilding the object tree"
317 @echo "--------------------------------------------------------------"
318 cd ${.CURDIR}; ${WMAKE} par-obj
321 @echo "--------------------------------------------------------------"
322 @echo ">>> stage 2: build tools"
323 @echo "--------------------------------------------------------------"
324 cd ${.CURDIR}; ${TMAKE} build-tools
327 @echo "--------------------------------------------------------------"
328 @echo ">>> stage 3: cross tools"
329 @echo "--------------------------------------------------------------"
330 cd ${.CURDIR}; ${XMAKE} cross-tools
333 @echo "--------------------------------------------------------------"
334 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
335 @echo "--------------------------------------------------------------"
336 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
339 @echo "--------------------------------------------------------------"
340 @echo ">>> stage 4: building libraries"
341 @echo "--------------------------------------------------------------"
342 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
345 @echo "--------------------------------------------------------------"
346 @echo ">>> stage 4: make dependencies"
347 @echo "--------------------------------------------------------------"
348 cd ${.CURDIR}; ${WMAKE} par-depend
351 @echo "--------------------------------------------------------------"
352 @echo ">>> stage 4: building everything.."
353 @echo "--------------------------------------------------------------"
354 cd ${.CURDIR}; ${WMAKE} par-all
358 .if !defined(SUBDIR_OVERRIDE)
359 WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools
361 WMAKE_TGTS+= _cleanobj _obj _build-tools
362 .if !defined(SUBDIR_OVERRIDE)
363 WMAKE_TGTS+= _cross-tools
365 WMAKE_TGTS+= _includes _libraries _depend everything
367 buildworld: ${WMAKE_TGTS}
368 .ORDER: ${WMAKE_TGTS}
373 # Checks to be sure system is ready for installworld
376 .if !defined(NO_SENDMAIL)
377 @if ! `id -u smmsp > /dev/null`; then \
378 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
381 @if ! `id -g smmsp > /dev/null`; then \
382 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
386 .if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \
387 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/")
388 @echo "Checking to see if your booted kernel is fresh enough.."
389 ${.OBJDIR}/bin/sh/sh -c \
390 'echo "Testing installed kernel for new sigaction(2) syscall"'
397 # Distributes everything compiled by a `buildworld'.
401 # Installs everything compiled by a 'buildworld'.
403 distributeworld installworld: installcheck
404 mkdir -p ${INSTALLTMP}
405 for prog in [ awk cap_mkdb cat chflags chmod chown \
406 date echo egrep find grep \
407 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
408 test true uname wc zic; do \
409 cp `which $$prog` ${INSTALLTMP}; \
411 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
417 # If you have a build server, you can NFS mount the source and obj directories
418 # and do a 'make reinstall' on the *client* to install new binaries from the
419 # most recent server build.
422 @echo "--------------------------------------------------------------"
423 @echo ">>> Making hierarchy"
424 @echo "--------------------------------------------------------------"
425 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
427 @echo "--------------------------------------------------------------"
428 @echo ">>> Installing everything.."
429 @echo "--------------------------------------------------------------"
430 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
431 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
433 @echo "--------------------------------------------------------------"
434 @echo ">>> Rebuilding man page indices"
435 @echo "--------------------------------------------------------------"
436 cd ${.CURDIR}/share/man; ${MAKE} makedb
440 @echo "--------------------------------------------------------------"
441 @echo ">>> Distributing everything.."
442 @echo "--------------------------------------------------------------"
443 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
446 # buildkernel and installkernel
448 # Which kernels to build and/or install is specified by setting
449 # KERNCONF. If not defined a GENERIC kernel is built/installed.
450 # Only the existing (depending TARGET) config files are used
451 # for building kernels and only the first of these is designated
452 # as the one being installed.
454 # Note that we have to use TARGET instead of TARGET_ARCH when
455 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
456 # be set to cross-build, we have to make sure TARGET is set
459 .if !defined(KERNCONF) && defined(KERNEL)
465 INSTKERNNAME?= kernel
467 KERNSRCDIR?= ${.CURDIR}/sys
468 KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf
469 KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR}
470 KERNCONFDIR?= ${KRNLCONFDIR}
474 .for _kernel in ${KERNCONF}
475 .if exists(${KERNCONFDIR}/${_kernel})
476 BUILDKERNELS+= ${_kernel}
477 .if empty(INSTALLKERNEL)
478 INSTALLKERNEL= ${_kernel}
486 # Builds all kernels defined by BUILDKERNELS.
489 .if empty(BUILDKERNELS)
490 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF}).";
493 .if defined(KERNWARN)
494 @echo "--------------------------------------------------------------"
495 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
496 @echo "--------------------------------------------------------------"
500 .for _kernel in ${BUILDKERNELS}
501 @echo "--------------------------------------------------------------"
502 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
503 @echo "--------------------------------------------------------------"
504 @echo "===> ${_kernel}"
505 mkdir -p ${KRNLOBJDIR}
506 .if !defined(NO_KERNELCONFIG)
509 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
510 ${KERNCONFDIR}/${_kernel}
512 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
513 cd ${KRNLOBJDIR}/${_kernel}; \
514 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR}
516 cd ${KRNLOBJDIR}/${_kernel}; \
517 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
518 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
519 cd ${KRNLOBJDIR}/${_kernel}; \
520 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj
521 # XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
522 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
523 .for target in obj depend all
524 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \
525 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
526 ${MAKE} -DNO_CPU_CFLAGS ${target}
529 .if !defined(NO_KERNELDEPEND)
530 cd ${KRNLOBJDIR}/${_kernel}; \
531 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ
533 cd ${KRNLOBJDIR}/${_kernel}; \
534 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ
535 @echo "--------------------------------------------------------------"
536 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
537 @echo "--------------------------------------------------------------"
543 # Install the kernel defined by INSTALLKERNEL
545 installkernel reinstallkernel installkernel.debug reinstallkernel.debug:
546 .if empty(INSTALLKERNEL)
547 @echo "ERROR: No kernel \"${KERNCONF}\" to install."
550 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
551 ${CROSSENV} PATH=${TMPPATH} \
552 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//}
557 # Update the source tree, by running sup and/or running cvs to update to the
561 .if defined(SUP_UPDATE)
562 @echo "--------------------------------------------------------------"
563 @echo ">>> Running ${SUP}"
564 @echo "--------------------------------------------------------------"
566 @${SUP} ${SUPFLAGS} ${SUPFILE}
568 .if defined(SUPFILE1)
569 @${SUP} ${SUPFLAGS} ${SUPFILE1}
571 .if defined(SUPFILE2)
572 @${SUP} ${SUPFLAGS} ${SUPFILE2}
574 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
575 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
577 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
578 @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
581 .if defined(CVS_UPDATE)
582 @echo "--------------------------------------------------------------"
583 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
584 @echo "--------------------------------------------------------------"
585 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d
591 # Build most of the user binaries on the existing system libs and includes.
594 @echo "--------------------------------------------------------------"
595 @echo ">>> Building programs only"
596 @echo "--------------------------------------------------------------"
597 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
598 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
604 # Install the binaries built by the 'most' target. This does not include
605 # libraries or include files.
608 @echo "--------------------------------------------------------------"
609 @echo ">>> Installing programs only"
610 @echo "--------------------------------------------------------------"
611 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
612 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
616 # ------------------------------------------------------------------------
618 # From here onwards are utility targets used by the 'make world' and
619 # related targets. If your 'world' breaks, you may like to try to fix
620 # the problem and manually run the following targets to attempt to
621 # complete the build. Beware, this is *not* guaranteed to work, you
622 # need to have a pretty good grip on the current state of the system
623 # to attempt to manually finish it. If in doubt, 'make world' again.
627 # legacy: Build compatibility shims for the next three targets
630 .for _tool in tools/build
631 @${ECHODIR} "===> ${_tool}"; \
632 cd ${.CURDIR}/${_tool}; \
633 ${MAKE} DIRPRFX=${_tool}/ obj; \
634 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
635 ${MAKE} DIRPRFX=${_tool}/ depend; \
636 ${MAKE} DIRPRFX=${_tool}/ all; \
637 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
641 # bootstrap-tools: Build tools needed for compatibility
643 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
644 _strfile= games/fortune/strfile
648 _gperf= gnu/usr.bin/gperf
649 .if ${BOOTSTRAPPING} < 500113
650 _groff= gnu/usr.bin/groff
652 _groff= gnu/usr.bin/groff/tmac
656 .if ${BOOTSTRAPPING} < 450005 || \
657 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034
658 _uudecode= usr.bin/uudecode
661 .if ${BOOTSTRAPPING} < 430002 || \
662 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019
663 _xargs= usr.bin/xargs
666 .if ${BOOTSTRAPPING} < 430002 || \
667 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018
671 .if !defined(NORESCUE) && \
672 ${BOOTSTRAPPING} < 501100
673 _crunchgen= usr.sbin/crunch/crunchgen
676 .if ${BOOTSTRAPPING} < 500019
677 _kbdcontrol= usr.sbin/kbdcontrol
685 gnu/usr.bin/texinfo \
696 @${ECHODIR} "===> ${_tool}"; \
697 cd ${.CURDIR}/${_tool}; \
698 ${MAKE} DIRPRFX=${_tool}/ obj; \
699 ${MAKE} DIRPRFX=${_tool}/ depend; \
700 ${MAKE} DIRPRFX=${_tool}/ all; \
701 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
705 # build-tools: Build special purpose build tools
707 .if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
708 _aicasm= sys/modules/aic7xxx/aicasm
711 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
712 _share= share/syscons/scrnmaps
715 .if !defined(NO_FORTRAN)
716 _fortran= gnu/usr.bin/cc/f771
719 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
720 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
721 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
722 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
725 .if exists(${.CURDIR}/rescue) && !defined(NORESCUE)
726 _rescue= rescue/rescue
734 gnu/usr.bin/cc/cc_tools \
743 @${ECHODIR} "===> ${_tool}"; \
744 cd ${.CURDIR}/${_tool}; \
745 ${MAKE} DIRPRFX=${_tool}/ obj; \
746 ${MAKE} DIRPRFX=${_tool}/ build-tools
750 # cross-tools: Build cross-building tools
752 .if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
753 ${BOOTSTRAPPING} < 500037
754 _elf2aout= usr.bin/elf2aout
757 .if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH}
758 _btxld= usr.sbin/btxld
761 .if (!defined(NORESCUE) || \
762 defined(RELEASEDIR)) && \
763 ( ${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 501101 )
764 _crunchide= usr.sbin/crunch/crunchide
767 .if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH}
768 _elf2exe= usr.sbin/elf2exe
771 .if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
773 _kgzip= usr.sbin/kgzip
778 gnu/usr.bin/binutils \
781 usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \
786 @${ECHODIR} "===> ${_tool}"; \
787 cd ${.CURDIR}/${_tool}; \
788 ${MAKE} DIRPRFX=${_tool}/ obj; \
789 ${MAKE} DIRPRFX=${_tool}/ depend; \
790 ${MAKE} DIRPRFX=${_tool}/ all; \
791 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
795 # hierarchy - ensure that all the needed directories are present
798 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
801 # libraries - build all libraries, and install them under ${DESTDIR}.
803 # The list of libraries with dependents (${_prebuild_libs}) and their
804 # interdependencies (__L) are built automatically by the
805 # ${.CURDIR}/tools/make_libdeps.sh script.
809 ${MAKE} -f Makefile.inc1 _startup_libs; \
810 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
811 ${MAKE} -f Makefile.inc1 _generic_libs;
813 # These dependencies are not automatically generated:
815 # gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
816 # shared libraries for ELF.
818 # lib/libc (libc_pic.a) must be built before lib/libpthread.
820 _startup_libs= gnu/lib/csu gnu/lib/libgcc
821 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
822 _startup_libs+= lib/csu/${MACHINE_ARCH}-elf
824 _startup_libs+= lib/csu/${MACHINE_ARCH}
828 _generic_libs= gnu/lib
830 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
831 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
832 _prebuild_libs+= kerberos5/lib/libasn1
833 _prebuild_libs+= kerberos5/lib/libgssapi
834 _prebuild_libs+= kerberos5/lib/libkrb5
835 _prebuild_libs+= kerberos5/lib/libroken
836 _generic_libs+= kerberos5/lib
839 .if !defined(NOLIBPTHREAD)
840 _prebuild_libs+= lib/libc
842 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \
843 lib/libkvm lib/libmd \
844 lib/libncurses lib/libopie lib/libpam lib/libradius \
846 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
849 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
850 lib/libypclnt__L: lib/librpcsvc__L
854 .if !defined(NOCRYPT)
855 .if !defined(NO_OPENSSL)
856 _prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
857 .if !defined(NO_OPENSSH)
858 _prebuild_libs+= secure/lib/libssh
859 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
862 _generic_libs+= secure/lib
865 _generic_libs+= usr.bin/lex/lib
867 .if ${MACHINE_ARCH} == "i386"
868 _generic_libs+= usr.sbin/pcvt/keycap
871 .for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
873 .if exists(${.CURDIR}/${_lib})
874 @${ECHODIR} "===> ${_lib}"; \
875 cd ${.CURDIR}/${_lib}; \
876 ${MAKE} DIRPRFX=${_lib}/ depend; \
877 ${MAKE} DIRPRFX=${_lib}/ all; \
878 ${MAKE} DIRPRFX=${_lib}/ install
882 # libpam is special: we need to build static PAM modules before
883 # static PAM library, and dynamic PAM library before dynamic PAM
885 lib/libpam__L: .PHONY
886 @${ECHODIR} "===> lib/libpam"; \
887 cd ${.CURDIR}/lib/libpam; \
888 ${MAKE} DIRPRFX=lib/libpam/ depend; \
889 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
890 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
892 _startup_libs: ${_startup_libs:S/$/__L/}
893 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
894 _generic_libs: ${_generic_libs:S/$/__L/}
896 .for __target in all clean cleandepend cleandir depend includes obj
897 .for entry in ${SUBDIR}
898 ${entry}.${__target}__D: .PHONY
899 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
900 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
901 edir=${entry}.${MACHINE_ARCH}; \
902 cd ${.CURDIR}/$${edir}; \
904 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
906 cd ${.CURDIR}/$${edir}; \
908 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
910 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
913 .include <bsd.subdir.mk>