Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DMAKE_KERBEROS4 to build KerberosIV
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNOSECURE do not go into secure subdir
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24
  25 #
  26 # The intended user-driven targets are:
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # installworld- install everything built by "buildworld"
  29 # update      - convenient way to update your source tree (eg: sup/cvs)
  30 # most        - build user commands, no libraries or include files
  31 # installmost - install user commands, no libraries or include files
  32 #
  33 # Standard targets (not defined here) are documented in the makefiles in
  34 # /usr/share/mk.  These include:
  35 #               obj depend all install clean cleandepend cleanobj
  36
  37 # Put initial settings here.
  38 SUBDIR=
  39
  40 # We must do share/info early so that installation of info `dir'
  41 # entries works correctly.  Do it first since it is less likely to
  42 # grow dependencies on include and lib than vice versa.
  43 .if exists(${.CURDIR}/share/info)
  44 SUBDIR+= share/info
  45 .endif
  46
  47 # We must do include and lib early so that the perl *.ph generation
  48 # works correctly as it uses the header files installed by this.
  49 .if exists(${.CURDIR}/include)
  50 SUBDIR+= include
  51 .endif
  52 .if exists(${.CURDIR}/lib)
  53 SUBDIR+= lib
  54 .endif
  55
  56 .if exists(${.CURDIR}/bin)
  57 SUBDIR+= bin
  58 .endif
  59 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  60 SUBDIR+= games
  61 .endif
  62 .if exists(${.CURDIR}/gnu)
  63 SUBDIR+= gnu
  64 .endif
  65 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
  66     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
  67 SUBDIR+= kerberosIV
  68 .endif
  69 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  70     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  71 SUBDIR+= kerberos5
  72 .endif
  73 .if exists(${.CURDIR}/libexec)
  74 SUBDIR+= libexec
  75 .endif
  76 .if exists(${.CURDIR}/sbin)
  77 SUBDIR+= sbin
  78 .endif
  79 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  80 SUBDIR+= share
  81 .endif
  82 .if exists(${.CURDIR}/sys)
  83 SUBDIR+= sys
  84 .endif
  85 .if exists(${.CURDIR}/usr.bin)
  86 SUBDIR+= usr.bin
  87 .endif
  88 .if exists(${.CURDIR}/usr.sbin)
  89 SUBDIR+= usr.sbin
  90 .endif
  91 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
  92 SUBDIR+= secure
  93 .endif
  94
  95 # etc must be last for "distribute" to work
  96 .if exists(${.CURDIR}/etc)
  97 SUBDIR+= etc
  98 .endif
  99
 100 # These are last, since it is nice to at least get the base system
 101 # rebuilt before you do them.
 102 .if defined(LOCAL_DIRS)
 103 .for _DIR in ${LOCAL_DIRS}
 104 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 105 SUBDIR+= ${_DIR}
 106 .endif
 107 .endfor
 108 .endif
 109
 110 .if defined(NOCLEANDIR)
 111 CLEANDIR=       clean cleandepend
 112 .else
 113 CLEANDIR=       cleandir
 114 .endif
 115
 116 CVS?=           cvs
 117 SUP?=           /usr/local/bin/cvsup
 118 SUPFLAGS?=      -g -L 2 -P -
 119 .if defined(SUPHOST)
 120 SUPFLAGS+=      -h ${SUPHOST}
 121 .endif
 122
 123 MAKEOBJDIRPREFIX?=      /usr/obj
 124 TARGET_ARCH?=   ${MACHINE_ARCH}
 125 TARGET?=        ${MACHINE}
 126 .if make(buildworld)
 127 BUILD_ARCH!=    sysctl -n hw.machine_arch
 128 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 129 .error To cross-build, set TARGET_ARCH.
 130 .endif
 131 .endif
 132 .if ${MACHINE_ARCH} == ${TARGET_ARCH}
 133 OBJTREE=        ${MAKEOBJDIRPREFIX}
 134 .else
 135 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET_ARCH}
 136 .endif
 137 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 138 # /usr/games added for fortune which depend on strfile
 139 STRICTTMPPATH=  ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 140 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 141 OBJFORMAT_PATH?=        /usr/libexec
 142
 143 TMPDIR?=        /tmp
 144 TMPPID!=        echo $$$$
 145 INSTALLTMP=     ${TMPDIR}/install.${TMPPID}
 146
 147 #
 148 # Building a world goes through the following stages
 149 #
 150 # 1. bootstrap-tool stage [BMAKE]
 151 #       This stage is responsible for creating programs that
 152 #       are needed for backward compatibility reasons. They
 153 #       are not built as cross-tools.
 154 # 2. build-tool stage [TMAKE]
 155 #       This stage is responsible for creating the object
 156 #       tree and building any tools that are needed during
 157 #       the build process.
 158 # 3. cross-tool stage [XMAKE]
 159 #       This stage is responsible for creating any tools that
 160 #       are needed for cross-builds. A cross-compiler is one
 161 #       of them.
 162 # 4. world stage [WMAKE]
 163 #       This stage actually builds the world.
 164 # 5. install stage (optional) [IMAKE]
 165 #       This stage installs a previously built world.
 166 #
 167
 168 # Common environment for world related stages
 169 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 170                 MACHINE_ARCH=${TARGET_ARCH} \
 171                 MACHINE=${TARGET} \
 172                 COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
 173                 LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib \
 174                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
 175                 CFLAGS="-nostdinc ${CFLAGS}" \
 176                 CXXINCLUDES="-nostdinc++ ${CXXINCLUDES}" \
 177                 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0 \
 178                 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
 179                 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
 180                 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
 181
 182 # bootstrap-tool stage
 183 BMAKEENV=       MAKEOBJDIRPREFIX=${WORLDTMP} \
 184                 DESTDIR= \
 185                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 186 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 187                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED
 188
 189 # build-tool stage
 190 TMAKEENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 191                 DESTDIR= \
 192                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 193 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1
 194
 195 # cross-tool stage
 196 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 197
 198 # world stage
 199 WMAKEENV=       ${CROSSENV} \
 200                 DESTDIR=${WORLDTMP} \
 201                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 202                 PATH=${TMPPATH}
 203 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 204
 205 # install stage
 206 IMAKEENV=       ${CROSSENV} \
 207                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 208 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 209
 210 # kernel stage
 211 KMAKEENV=       ${WMAKEENV} \
 212                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
 213
 214 USRDIRS=        usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
 215                 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
 216                 usr/share/dict \
 217                 usr/share/groff_font/devX100 \
 218                 usr/share/groff_font/devX100-12 \
 219                 usr/share/groff_font/devX75 \
 220                 usr/share/groff_font/devX75-12 \
 221                 usr/share/groff_font/devascii \
 222                 usr/share/groff_font/devcp1047 \
 223                 usr/share/groff_font/devdvi \
 224                 usr/share/groff_font/devhtml \
 225                 usr/share/groff_font/devkoi8-r \
 226                 usr/share/groff_font/devlatin1 \
 227                 usr/share/groff_font/devlbp \
 228                 usr/share/groff_font/devlj4 \
 229                 usr/share/groff_font/devps \
 230                 usr/share/groff_font/devutf8 \
 231                 usr/share/tmac/mdoc usr/share/tmac/mm
 232
 233 INCDIRS=        arpa g++/std isc objc protocols readline rpc rpcsvc openssl \
 234                 security
 235
 236 #
 237 # buildworld
 238 #
 239 # Attempt to rebuild the entire system, with reasonable chance of
 240 # success, regardless of how old your existing system is.
 241 #
 242 buildworld:
 243         @echo
 244         @echo "--------------------------------------------------------------"
 245         @echo ">>> Rebuilding the temporary build tree"
 246         @echo "--------------------------------------------------------------"
 247 .if !defined(NOCLEAN)
 248         rm -rf ${WORLDTMP}
 249 .endif
 250 .for _dir in ${USRDIRS}
 251         mkdir -p ${WORLDTMP}/${_dir}
 252 .endfor
 253 .for _dir in ${INCDIRS}
 254         mkdir -p ${WORLDTMP}/usr/include/${_dir}
 255 .endfor
 256         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 257         @echo
 258         @echo "--------------------------------------------------------------"
 259         @echo ">>> stage 1: bootstrap tools"
 260         @echo "--------------------------------------------------------------"
 261         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 262 .if !defined(NOCLEAN)
 263         @echo
 264         @echo "--------------------------------------------------------------"
 265         @echo ">>> stage 2: cleaning up the object tree"
 266         @echo "--------------------------------------------------------------"
 267         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 268 .endif
 269         @echo
 270         @echo "--------------------------------------------------------------"
 271         @echo ">>> stage 2: rebuilding the object tree"
 272         @echo "--------------------------------------------------------------"
 273         cd ${.CURDIR}; ${WMAKE} par-obj
 274         @echo
 275         @echo "--------------------------------------------------------------"
 276         @echo ">>> stage 2: build tools"
 277         @echo "--------------------------------------------------------------"
 278         cd ${.CURDIR}; ${TMAKE} build-tools
 279         @echo
 280         @echo "--------------------------------------------------------------"
 281         @echo ">>> stage 3: cross tools"
 282         @echo "--------------------------------------------------------------"
 283         cd ${.CURDIR}; ${XMAKE} cross-tools
 284         @echo
 285         @echo "--------------------------------------------------------------"
 286         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 287         @echo "--------------------------------------------------------------"
 288         cd ${.CURDIR}; ${WMAKE} SHARED=copies includes
 289         @echo
 290         @echo "--------------------------------------------------------------"
 291         @echo ">>> stage 4: building libraries"
 292         @echo "--------------------------------------------------------------"
 293         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 294         @echo
 295         @echo "--------------------------------------------------------------"
 296         @echo ">>> stage 4: make dependencies"
 297         @echo "--------------------------------------------------------------"
 298         cd ${.CURDIR}; ${WMAKE} par-depend
 299         @echo
 300         @echo "--------------------------------------------------------------"
 301         @echo ">>> stage 4: building everything.."
 302         @echo "--------------------------------------------------------------"
 303         cd ${.CURDIR}; ${WMAKE} all
 304
 305 everything:
 306         @echo "--------------------------------------------------------------"
 307         @echo ">>> Building everything.."
 308         @echo "--------------------------------------------------------------"
 309         cd ${.CURDIR}; ${WMAKE} all
 310
 311 #
 312 # installworld
 313 #
 314 # Installs everything compiled by a 'buildworld'.
 315 #
 316 installworld:
 317         mkdir -p ${INSTALLTMP}
 318         for prog in [ awk cat chflags chmod chown date echo egrep find grep \
 319             ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
 320             test true uname wc zic; do \
 321                 cp `which $$prog` ${INSTALLTMP}; \
 322         done
 323         cd ${.CURDIR}; ${IMAKE} reinstall
 324         rm -rf ${INSTALLTMP}
 325
 326 #
 327 # reinstall
 328 #
 329 # If you have a build server, you can NFS mount the source and obj directories
 330 # and do a 'make reinstall' on the *client* to install new binaries from the
 331 # most recent server build.
 332 #
 333 reinstall:
 334         @echo "--------------------------------------------------------------"
 335         @echo ">>> Making hierarchy"
 336         @echo "--------------------------------------------------------------"
 337         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 338         @echo
 339         @echo "--------------------------------------------------------------"
 340         @echo ">>> Installing everything.."
 341         @echo "--------------------------------------------------------------"
 342         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 343 .if !defined(NOMAN)
 344         @echo
 345         @echo "--------------------------------------------------------------"
 346         @echo ">>> Rebuilding man page indices"
 347         @echo "--------------------------------------------------------------"
 348         cd ${.CURDIR}/share/man; ${MAKE} makedb
 349 .endif
 350
 351 #
 352 # distribworld
 353 #
 354 # Front-end to distribute to make sure the search path contains
 355 # the object directory. Needed for miniperl.
 356 #
 357 distribworld:
 358         cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
 359
 360 #
 361 # buildkernel and installkernel
 362 #
 363 # Which kernels to build and/or install is specified by setting
 364 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 365 # Only the existing (depending TARGET) config files are used
 366 # for building kernels and only the first of these is designated
 367 # as the one being installed.
 368 #
 369 # Note that we have to use TARGET instead of TARGET_ARCH when
 370 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 371 # be set to cross-build, we have to make sure TARGET is set
 372 # properly.
 373
 374 .if !defined(KERNCONF) && defined(KERNEL)
 375 KERNCONF=       ${KERNEL}
 376 KERNWARN=       yes
 377 .else
 378 KERNCONF?=      GENERIC
 379 .endif
 380 INSTKERNNAME?=  kernel
 381
 382 # The only exotic TARGET_ARCH/TARGET combination valid at this
 383 # time is i386/pc98. In all other cases set TARGET equal to
 384 # TARGET_ARCH.
 385 .if ${TARGET_ARCH} != "i386" || ${TARGET} != "pc98"
 386 TARGET=         ${TARGET_ARCH}
 387 .endif
 388
 389 KRNLSRCDIR=     ${.CURDIR}/sys
 390 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 391 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 392 KERNCONFDIR?=   ${KRNLCONFDIR}
 393
 394 BUILDKERNELS=
 395 INSTALLKERNEL=
 396 .for _kernel in ${KERNCONF}
 397 .if exists(${KERNCONFDIR}/${_kernel})
 398 BUILDKERNELS+=  ${_kernel}
 399 .if empty(INSTALLKERNEL)
 400 INSTALLKERNEL= ${_kernel}
 401 .endif
 402 .endif
 403 .endfor
 404
 405 #
 406 # buildkernel
 407 #
 408 # Builds all kernels defined by BUILDKERNELS.
 409 #
 410 buildkernel:
 411 .if empty(BUILDKERNELS)
 412         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 413         @false
 414 .endif
 415 .if defined(KERNWARN)
 416         @echo "--------------------------------------------------------------"
 417         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 418         @echo "--------------------------------------------------------------"
 419         @sleep 3
 420 .endif
 421         @echo
 422 .for _kernel in ${BUILDKERNELS}
 423         @echo "--------------------------------------------------------------"
 424         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 425         @echo "--------------------------------------------------------------"
 426         @echo "===> ${_kernel}"
 427         mkdir -p ${KRNLOBJDIR}
 428 .if !defined(NO_KERNELCONFIG)
 429         cd ${KRNLCONFDIR}; \
 430                 PATH=${TMPPATH} \
 431                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 432                         ${KERNCONFDIR}/${_kernel}
 433 .endif
 434 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 435 .if defined(MODULES_WITH_WORLD) || defined(NO_MODULES) || !exists(${KRNLSRCDIR}/modules)
 436         cd ${KRNLOBJDIR}/${_kernel}; \
 437             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean
 438 .else
 439         cd ${KRNLOBJDIR}/${_kernel}; \
 440             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean cleandir
 441 .endif
 442 .endif
 443         cd ${KRNLOBJDIR}/${_kernel}; \
 444                 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
 445                     ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
 446 .if !defined(NO_KERNELDEPEND)
 447         cd ${KRNLOBJDIR}/${_kernel}; \
 448             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 449 .endif
 450         cd ${KRNLOBJDIR}/${_kernel}; \
 451             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 452         @echo "--------------------------------------------------------------"
 453         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 454         @echo "--------------------------------------------------------------"
 455 .endfor
 456
 457 #
 458 # installkernel
 459 #
 460 # Install the kernel defined by INSTALLKERNEL
 461 #
 462 installkernel:
 463         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 464             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
 465 reinstallkernel:
 466         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 467             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
 468
 469 #
 470 # kernel
 471 #
 472 # Short hand for `make buildkernel installkernel'
 473 #
 474 kernel: buildkernel installkernel
 475
 476 #
 477 # update
 478 #
 479 # Update the source tree, by running sup and/or running cvs to update to the
 480 # latest copy.
 481 #
 482 update:
 483 .if defined(SUP_UPDATE)
 484         @echo "--------------------------------------------------------------"
 485         @echo ">>> Running ${SUP}"
 486         @echo "--------------------------------------------------------------"
 487 .if defined(SUPFILE)
 488         @${SUP} ${SUPFLAGS} ${SUPFILE}
 489 .endif
 490 .if defined(SUPFILE1)
 491         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 492 .endif
 493 .if defined(SUPFILE2)
 494         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 495 .endif
 496 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 497         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 498 .endif
 499 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 500         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 501 .endif
 502 .endif
 503 .if defined(CVS_UPDATE)
 504         @echo "--------------------------------------------------------------"
 505         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 506         @echo "--------------------------------------------------------------"
 507         cd ${.CURDIR}; ${CVS} -q update -A -P -d
 508 .endif
 509
 510 #
 511 # most
 512 #
 513 # Build most of the user binaries on the existing system libs and includes.
 514 #
 515 most:
 516         @echo "--------------------------------------------------------------"
 517         @echo ">>> Building programs only"
 518         @echo "--------------------------------------------------------------"
 519         cd ${.CURDIR}/bin;              ${MAKE} all
 520         cd ${.CURDIR}/sbin;             ${MAKE} all
 521         cd ${.CURDIR}/libexec;          ${MAKE} all
 522         cd ${.CURDIR}/usr.bin;          ${MAKE} all
 523         cd ${.CURDIR}/usr.sbin;         ${MAKE} all
 524         cd ${.CURDIR}/gnu/libexec;      ${MAKE} all
 525         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} all
 526         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} all
 527
 528 #
 529 # installmost
 530 #
 531 # Install the binaries built by the 'most' target.  This does not include
 532 # libraries or include files.
 533 #
 534 installmost:
 535         @echo "--------------------------------------------------------------"
 536         @echo ">>> Installing programs only"
 537         @echo "--------------------------------------------------------------"
 538         cd ${.CURDIR}/bin;              ${MAKE} install
 539         cd ${.CURDIR}/sbin;             ${MAKE} install
 540         cd ${.CURDIR}/libexec;          ${MAKE} install
 541         cd ${.CURDIR}/usr.bin;          ${MAKE} install
 542         cd ${.CURDIR}/usr.sbin;         ${MAKE} install
 543         cd ${.CURDIR}/gnu/libexec;      ${MAKE} install
 544         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} install
 545         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} install
 546
 547 #
 548 # ------------------------------------------------------------------------
 549 #
 550 # From here onwards are utility targets used by the 'make world' and
 551 # related targets.  If your 'world' breaks, you may like to try to fix
 552 # the problem and manually run the following targets to attempt to
 553 # complete the build.  Beware, this is *not* guaranteed to work, you
 554 # need to have a pretty good grip on the current state of the system
 555 # to attempt to manually finish it.  If in doubt, 'make world' again.
 556 #
 557
 558 #
 559 # bootstrap-tools: Build tools needed for compatibility
 560 #
 561 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 562 _strfile=       games/fortune/strfile
 563 .endif
 564
 565 bootstrap-tools:
 566 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
 567     usr.sbin/config usr.sbin/kbdcontrol \
 568     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
 569         cd ${.CURDIR}/${_tool}; \
 570                 ${MAKE} obj; \
 571                 ${MAKE} depend; \
 572                 ${MAKE} all; \
 573                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 574 .endfor
 575
 576 #
 577 # build-tools: Build special purpose build tools
 578 #
 579 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 580 _games= games/adventure games/hack games/phantasia
 581 .endif
 582
 583 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 584 _share= share/syscons/scrnmaps
 585 .endif
 586
 587 .if !defined(NO_FORTRAN)
 588 _fortran= gnu/usr.bin/cc/f771
 589 .endif
 590
 591 .if !defined(NOPERL)
 592 _perl=  gnu/usr.bin/perl/miniperl
 593 .endif
 594
 595 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
 596     !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 597 _libroken4= kerberosIV/lib/libroken
 598 .endif
 599
 600 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 601     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 602 _libkrb5= kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 603 .endif
 604
 605 build-tools:
 606 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
 607     ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
 608         usr.bin/file usr.sbin/sysinstall
 609         cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
 610 .endfor
 611
 612 #
 613 # cross-tools: Build cross-building tools
 614 #
 615 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 616 _elf2exe=       usr.sbin/elf2exe
 617 .endif
 618
 619 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 620 _btxld= usr.sbin/btxld
 621 .endif
 622
 623 cross-tools:
 624 .for _tool in ${_btxld} ${_elf2exe} \
 625     gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
 626         cd ${.CURDIR}/${_tool}; \
 627                 ${MAKE} obj; \
 628                 ${MAKE} depend; \
 629                 ${MAKE} all; \
 630                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 631 .endfor
 632
 633 #
 634 # hierarchy - ensure that all the needed directories are present
 635 #
 636 hierarchy:
 637         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 638
 639 #
 640 # includes - possibly generate and install the include files.
 641 #
 642 includes:
 643         cd ${.CURDIR}/include;                  ${MAKE} -B all install
 644         cd ${.CURDIR}/gnu/include;              ${MAKE} install
 645         cd ${.CURDIR}/gnu/lib/libobjc;          ${MAKE} beforeinstall
 646         cd ${.CURDIR}/gnu/lib/libreadline/readline;     ${MAKE} beforeinstall
 647         cd ${.CURDIR}/gnu/lib/libregex;         ${MAKE} beforeinstall
 648         cd ${.CURDIR}/gnu/lib/libstdc++;        ${MAKE} beforeinstall
 649         cd ${.CURDIR}/gnu/lib/libdialog;        ${MAKE} beforeinstall
 650         cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus;   ${MAKE} beforeinstall
 651 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 652 .if exists(${.CURDIR}/secure/lib/libcrypto)
 653         cd ${.CURDIR}/secure/lib/libcrypto;     ${MAKE} beforeinstall
 654 .endif
 655 .if exists(${.CURDIR}/secure/lib/libssl)
 656         cd ${.CURDIR}/secure/lib/libssl;        ${MAKE} beforeinstall
 657 .endif
 658 .endif
 659 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
 660     defined(MAKE_KERBEROS4)
 661         cd ${.CURDIR}/kerberosIV/lib/libacl;    ${MAKE} beforeinstall
 662         cd ${.CURDIR}/kerberosIV/lib/libkadm;   ${MAKE} beforeinstall
 663         cd ${.CURDIR}/kerberosIV/lib/libkafs;   ${MAKE} beforeinstall
 664         cd ${.CURDIR}/kerberosIV/lib/libkdb;    ${MAKE} beforeinstall
 665         cd ${.CURDIR}/kerberosIV/lib/libkrb;    ${MAKE} beforeinstall
 666         cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
 667 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 668         cd ${.CURDIR}/secure/lib/libtelnet;     ${MAKE} beforeinstall
 669 .else
 670         cd ${.CURDIR}/lib/libtelnet;            ${MAKE} beforeinstall
 671 .endif
 672 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
 673     defined(MAKE_KERBEROS5)
 674         cd ${.CURDIR}/kerberos5/lib/libasn1;            ${MAKE} beforeinstall
 675         cd ${.CURDIR}/kerberos5/lib/libhdb;             ${MAKE} beforeinstall
 676         cd ${.CURDIR}/kerberos5/lib/libkadm5clnt;       ${MAKE} beforeinstall
 677         cd ${.CURDIR}/kerberos5/lib/libkadm5srv;        ${MAKE} beforeinstall
 678         cd ${.CURDIR}/kerberos5/lib/libkafs5;           ${MAKE} beforeinstall
 679         cd ${.CURDIR}/kerberos5/lib/libkrb5;            ${MAKE} beforeinstall
 680         cd ${.CURDIR}/kerberos5/lib/libsl;              ${MAKE} beforeinstall
 681 .endif
 682 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
 683         cd ${.CURDIR}/lib/csu/${MACHINE_ARCH};  ${MAKE} beforeinstall
 684 .endif
 685         cd ${.CURDIR}/gnu/lib/csu;              ${MAKE} beforeinstall
 686         cd ${.CURDIR}/lib/libalias;             ${MAKE} beforeinstall
 687         cd ${.CURDIR}/lib/libatm;               ${MAKE} beforeinstall
 688         cd ${.CURDIR}/lib/libdevstat;           ${MAKE} beforeinstall
 689         cd ${.CURDIR}/lib/libc;                 ${MAKE} beforeinstall
 690         cd ${.CURDIR}/lib/libcalendar;          ${MAKE} beforeinstall
 691         cd ${.CURDIR}/lib/libcam;               ${MAKE} beforeinstall
 692         cd ${.CURDIR}/lib/libdisk;              ${MAKE} beforeinstall
 693         cd ${.CURDIR}/lib/libedit;              ${MAKE} beforeinstall
 694         cd ${.CURDIR}/lib/libfetch;             ${MAKE} beforeinstall
 695         cd ${.CURDIR}/lib/libftpio;             ${MAKE} beforeinstall
 696         cd ${.CURDIR}/lib/libkvm;               ${MAKE} beforeinstall
 697         cd ${.CURDIR}/lib/libmd;                ${MAKE} beforeinstall
 698         cd ${.CURDIR}/lib/libmp;                ${MAKE} beforeinstall
 699 .if !defined(WANT_CSRG_LIBM)
 700         cd ${.CURDIR}/lib/msun;                 ${MAKE} beforeinstall
 701 .endif
 702         cd ${.CURDIR}/lib/libncp;               ${MAKE} beforeinstall
 703         cd ${.CURDIR}/lib/libncurses;           ${MAKE} beforeinstall
 704         cd ${.CURDIR}/lib/libnetgraph;          ${MAKE} beforeinstall
 705         cd ${.CURDIR}/lib/libopie;              ${MAKE} beforeinstall
 706         cd ${.CURDIR}/lib/libpcap;              ${MAKE} beforeinstall
 707         cd ${.CURDIR}/lib/libradius;            ${MAKE} beforeinstall
 708         cd ${.CURDIR}/lib/librpcsvc;            ${MAKE} beforeinstall
 709         cd ${.CURDIR}/lib/libpam/libpam;        ${MAKE} beforeinstall
 710         cd ${.CURDIR}/lib/libsbuf;              ${MAKE} beforeinstall
 711         cd ${.CURDIR}/lib/libstand;             ${MAKE} beforeinstall
 712         cd ${.CURDIR}/lib/libtacplus;           ${MAKE} beforeinstall
 713         cd ${.CURDIR}/lib/libcom_err;           ${MAKE} beforeinstall
 714         cd ${.CURDIR}/lib/libutil;              ${MAKE} beforeinstall
 715         cd ${.CURDIR}/lib/libvgl;               ${MAKE} beforeinstall
 716         cd ${.CURDIR}/lib/libwrap;              ${MAKE} beforeinstall
 717         cd ${.CURDIR}/lib/libz;                 ${MAKE} beforeinstall
 718         cd ${.CURDIR}/usr.bin/lex;              ${MAKE} beforeinstall
 719
 720 #
 721 # libraries - build all libraries, and install them under ${DESTDIR}.
 722 #
 723 # The following dependencies exist between the libraries:
 724 #
 725 # lib*: csu libgcc_pic
 726 # libatm: libmd
 727 # libcam: libsbuf
 728 # libcrypt: libmd
 729 # libdevstat: libkvm
 730 # libdialog: libncurses
 731 # libedit: libncurses
 732 # libg++: libm
 733 # libkrb: libcrypt
 734 # libopie: libmd
 735 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
 736 #         librpcsvc libtacplus libutil libz libssh
 737 # libradius: libmd
 738 # libreadline: libncurses
 739 # libstc++: libm
 740 # libtacplus: libmd
 741 #
 742 # Across directories this comes down to (rougly):
 743 #
 744 # gnu/lib: lib/libm lib/libncurses
 745 # kerberosIV/lib kerberos5/lib: lib/libcrypt
 746 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
 747 #             secure/lib/libssh lib/libz
 748 # secure/lib: lib/libmd
 749 #
 750 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
 751 _csu=   lib/csu/${MACHINE_ARCH}.pcc
 752 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
 753 _csu=   lib/csu/i386-elf
 754 .else
 755 _csu=   lib/csu/${MACHINE_ARCH}
 756 .endif
 757
 758 .if !defined(NOSECURE) && !defined(NOCRYPT)
 759 _secure_lib=    secure/lib
 760 .endif
 761
 762 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 763 _kerberosIV_lib=        kerberosIV/lib
 764 .endif
 765
 766 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 767 _kerberos5_lib= kerberos5/lib
 768 .endif
 769
 770 .if defined(WANT_CSRG_LIBM)
 771 _libm=  lib/libm
 772 .else
 773 _libm=  lib/msun
 774 .endif
 775
 776 .if ${MACHINE_ARCH} == "i386"
 777 _libkeycap=     usr.sbin/pcvt/keycap
 778 .endif
 779
 780 .if !defined(NOPERL)
 781 _libperl=       gnu/usr.bin/perl/libperl
 782 .endif
 783
 784 libraries:
 785 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
 786     ${_secure_lib} ${_kerberosIV_lib} \
 787     ${_kerberos5_lib} lib/libcom_err lib/libkvm ${_libm} lib/libncurses \
 788     lib/libopie lib/libradius lib/librpcsvc lib/libsbuf lib/libtacplus \
 789     lib/libutil lib/libz lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
 790 .if exists(${.CURDIR}/${_lib})
 791         cd ${.CURDIR}/${_lib}; \
 792                 ${MAKE} depend; \
 793                 ${MAKE} all; \
 794                 ${MAKE} install
 795 .endif
 796 .endfor
 797
 798 .for __target in clean cleandepend cleandir depend obj
 799 .for entry in ${SUBDIR}
 800 ${entry}.${__target}__D: .PHONY
 801         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 802                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 803                 edir=${entry}.${MACHINE_ARCH}; \
 804                 cd ${.CURDIR}/$${edir}; \
 805         else \
 806                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 807                 edir=${entry}; \
 808                 cd ${.CURDIR}/$${edir}; \
 809         fi; \
 810         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 811 .endfor
 812 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 813 .endfor
 814
 815 .include <bsd.subdir.mk>