Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DNO_KERBEROS Do not build Heimdal (Kerberos 5)
   6 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   7 #       -DNOCLEAN do not clean at all
   8 #       -DNOCRYPT will prevent building of crypt versions
   9 #       -DNOMAN do not build the manual pages
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNOSECURE do not go into secure subdir
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24
  25 #
  26 # The intended user-driven targets are:
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # installworld- install everything built by "buildworld"
  29 # update      - convenient way to update your source tree (eg: sup/cvs)
  30 # most        - build user commands, no libraries or include files
  31 # installmost - install user commands, no libraries or include files
  32 #
  33 # Standard targets (not defined here) are documented in the makefiles in
  34 # /usr/share/mk.  These include:
  35 #               obj depend all install clean cleandepend cleanobj
  36
  37 # Put initial settings here.
  38 SUBDIR=
  39
  40 # We must do share/info early so that installation of info `dir'
  41 # entries works correctly.  Do it first since it is less likely to
  42 # grow dependencies on include and lib than vice versa.
  43 .if exists(${.CURDIR}/share/info)
  44 SUBDIR+= share/info
  45 .endif
  46
  47 .if exists(${.CURDIR}/include)
  48 SUBDIR+= include
  49 .endif
  50 .if exists(${.CURDIR}/lib)
  51 SUBDIR+= lib
  52 .endif
  53
  54 .if exists(${.CURDIR}/bin)
  55 SUBDIR+= bin
  56 .endif
  57 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  58 SUBDIR+= games
  59 .endif
  60 .if exists(${.CURDIR}/gnu)
  61 SUBDIR+= gnu
  62 .endif
  63 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  64     !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS)
  65 SUBDIR+= kerberos5
  66 .endif
  67 .if exists(${.CURDIR}/libexec)
  68 SUBDIR+= libexec
  69 .endif
  70 .if exists(${.CURDIR}/sbin)
  71 SUBDIR+= sbin
  72 .endif
  73 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
  74 SUBDIR+= secure
  75 .endif
  76 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  77 SUBDIR+= share
  78 .endif
  79 .if exists(${.CURDIR}/sys)
  80 SUBDIR+= sys
  81 .endif
  82 .if exists(${.CURDIR}/usr.bin)
  83 SUBDIR+= usr.bin
  84 .endif
  85 .if exists(${.CURDIR}/usr.sbin)
  86 SUBDIR+= usr.sbin
  87 .endif
  88
  89 # etc must be last for "distribute" to work
  90 .if exists(${.CURDIR}/etc)
  91 SUBDIR+= etc
  92 .endif
  93
  94 # These are last, since it is nice to at least get the base system
  95 # rebuilt before you do them.
  96 .if defined(LOCAL_DIRS)
  97 .for _DIR in ${LOCAL_DIRS}
  98 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  99 SUBDIR+= ${_DIR}
 100 .endif
 101 .endfor
 102 .endif
 103
 104 .if defined(SUBDIR_OVERRIDE)
 105 SUBDIR=         ${SUBDIR_OVERRIDE}
 106 .endif
 107
 108 .if defined(NOCLEANDIR)
 109 CLEANDIR=       clean cleandepend
 110 .else
 111 CLEANDIR=       cleandir
 112 .endif
 113
 114 CVS?=           cvs
 115 SUP?=           /usr/local/bin/cvsup
 116 SUPFLAGS?=      -g -L 2 -P -
 117 .if defined(SUPHOST)
 118 SUPFLAGS+=      -h ${SUPHOST}
 119 .endif
 120
 121 MAKEOBJDIRPREFIX?=      /usr/obj
 122 .if !defined(OSRELDATE)
 123 OSRELDATE!=     awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
 124                 /usr/include/osreldate.h
 125 .endif
 126 TARGET_ARCH?=   ${MACHINE_ARCH}
 127 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 128 TARGET?=        ${MACHINE}
 129 TARGET_CPUTYPE?=${CPUTYPE}
 130 .else
 131 TARGET?=        ${TARGET_ARCH}
 132 TARGET_CPUTYPE?=
 133 .endif
 134 .if !empty(TARGET_CPUTYPE)
 135 _TARGET_CPUTYPE=${TARGET_CPUTYPE}
 136 .else
 137 _TARGET_CPUTYPE=dummy
 138 .endif
 139 _CPUTYPE!=      ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \
 140                 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE
 141 .if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
 142 .error CPUTYPE global should be set with ?=.
 143 .endif
 144 .if make(buildworld)
 145 BUILD_ARCH!=    sysctl -n hw.machine_arch
 146 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 147 .error To cross-build, set TARGET_ARCH.
 148 .endif
 149 .endif
 150 .if ${MACHINE} == ${TARGET}
 151 OBJTREE=        ${MAKEOBJDIRPREFIX}
 152 .else
 153 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET}
 154 .endif
 155 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 156 # /usr/games added for fortune which depend on strfile
 157 BPATH=          ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
 158 XPATH=          ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 159 STRICTTMPPATH=  ${BPATH}:${XPATH}
 160 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 161
 162 INSTALLTMP!=    /usr/bin/mktemp -d -u -t install
 163
 164 #
 165 # Building a world goes through the following stages
 166 #
 167 # 1. legacy stage [BMAKE]
 168 #       This stage is responsible for creating compatibility
 169 #       shims that are needed by the bootstrap-tools,
 170 #       build-tools and cross-tools stages.
 171 # 1. bootstrap-tools stage [BMAKE]
 172 #       This stage is responsible for creating programs that
 173 #       are needed for backward compatibility reasons. They
 174 #       are not built as cross-tools.
 175 # 2. build-tools stage [TMAKE]
 176 #       This stage is responsible for creating the object
 177 #       tree and building any tools that are needed during
 178 #       the build process.
 179 # 3. cross-tools stage [XMAKE]
 180 #       This stage is responsible for creating any tools that
 181 #       are needed for cross-builds. A cross-compiler is one
 182 #       of them.
 183 # 4. world stage [WMAKE]
 184 #       This stage actually builds the world.
 185 # 5. install stage (optional) [IMAKE]
 186 #       This stage installs a previously built world.
 187 #
 188
 189 BOOTSTRAPPING?= 0
 190
 191 # Common environment for world related stages
 192 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 193                 MACHINE_ARCH=${TARGET_ARCH} \
 194                 MACHINE=${TARGET} \
 195                 CPUTYPE=${TARGET_CPUTYPE} \
 196                 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
 197                 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
 198                 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
 199
 200 # bootstrap-tools stage
 201 BMAKEENV=       DESTDIR= \
 202                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 203                 PATH=${BPATH}:${PATH} \
 204                 WORLDTMP=${WORLDTMP} \
 205                 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
 206 BMAKE=          MAKEOBJDIRPREFIX=${WORLDTMP} \
 207                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 208                 BOOTSTRAPPING=${OSRELDATE} \
 209                 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \
 210                 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS
 211
 212 # build-tools stage
 213 TMAKE=          MAKEOBJDIRPREFIX=${OBJTREE} \
 214                 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
 215                 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS
 216
 217 # cross-tools stage
 218 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 219
 220 # world stage
 221 WMAKEENV=       ${CROSSENV} \
 222                 DESTDIR=${WORLDTMP} \
 223                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 224                 PATH=${TMPPATH}
 225 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 226
 227 # install stage
 228 IMAKEENV=       ${CROSSENV} \
 229                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 230 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 231
 232 # kernel stage
 233 KMAKEENV=       ${WMAKEENV}
 234
 235 #
 236 # buildworld
 237 #
 238 # Attempt to rebuild the entire system, with reasonable chance of
 239 # success, regardless of how old your existing system is.
 240 #
 241 _worldtmp:
 242 .if ${.CURDIR:C/[^,]//g} != ""
 243 #       The m4 build of sendmail files doesn't like it if ',' is used
 244 #       anywhere in the path of it's files.
 245         @echo
 246         @echo "*** Error: path to source tree contains a comma ','"
 247         @echo
 248         @false
 249 .endif
 250         @echo
 251         @echo "--------------------------------------------------------------"
 252         @echo ">>> Rebuilding the temporary build tree"
 253         @echo "--------------------------------------------------------------"
 254 .if !defined(NOCLEAN)
 255         rm -rf ${WORLDTMP}
 256 .else
 257         rm -rf ${WORLDTMP}/legacy/usr/include
 258         # XXX - These two can depend on any header file.
 259         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 260         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 261 .endif
 262 .for _dir in \
 263     usr/bin usr/games usr/include/sys usr/lib \
 264     usr/libexec usr/sbin usr/share/dict \
 265     usr/share/groff_font/devX100 \
 266     usr/share/groff_font/devX100-12 \
 267     usr/share/groff_font/devX75 \
 268     usr/share/groff_font/devX75-12 \
 269     usr/share/groff_font/devascii \
 270     usr/share/groff_font/devcp1047 \
 271     usr/share/groff_font/devdvi \
 272     usr/share/groff_font/devhtml \
 273     usr/share/groff_font/devkoi8-r \
 274     usr/share/groff_font/devlatin1 \
 275     usr/share/groff_font/devlbp \
 276     usr/share/groff_font/devlj4 \
 277     usr/share/groff_font/devps \
 278     usr/share/groff_font/devutf8 \
 279     usr/share/tmac/mdoc usr/share/tmac/mm
 280         mkdir -p ${WORLDTMP}/legacy/${_dir}
 281 .endfor
 282 .for _dir in \
 283     usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \
 284     usr/libexec usr/share/misc
 285         mkdir -p ${WORLDTMP}/${_dir}
 286 .endfor
 287         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 288 _legacy:
 289         @echo
 290         @echo "--------------------------------------------------------------"
 291         @echo ">>> stage 1: legacy release compatibility shims"
 292         @echo "--------------------------------------------------------------"
 293         cd ${.CURDIR}; ${BMAKE} legacy
 294 _bootstrap-tools:
 295         @echo
 296         @echo "--------------------------------------------------------------"
 297         @echo ">>> stage 1: bootstrap tools"
 298         @echo "--------------------------------------------------------------"
 299         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 300 _cleanobj:
 301 .if !defined(NOCLEAN)
 302         @echo
 303         @echo "--------------------------------------------------------------"
 304         @echo ">>> stage 2: cleaning up the object tree"
 305         @echo "--------------------------------------------------------------"
 306         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 307 .endif
 308 _obj:
 309         @echo
 310         @echo "--------------------------------------------------------------"
 311         @echo ">>> stage 2: rebuilding the object tree"
 312         @echo "--------------------------------------------------------------"
 313         cd ${.CURDIR}; ${WMAKE} par-obj
 314 _build-tools:
 315         @echo
 316         @echo "--------------------------------------------------------------"
 317         @echo ">>> stage 2: build tools"
 318         @echo "--------------------------------------------------------------"
 319         cd ${.CURDIR}; ${TMAKE} build-tools
 320 _cross-tools:
 321         @echo
 322         @echo "--------------------------------------------------------------"
 323         @echo ">>> stage 3: cross tools"
 324         @echo "--------------------------------------------------------------"
 325         cd ${.CURDIR}; ${XMAKE} cross-tools
 326 _includes:
 327         @echo
 328         @echo "--------------------------------------------------------------"
 329         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 330         @echo "--------------------------------------------------------------"
 331         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 332 _libraries:
 333         @echo
 334         @echo "--------------------------------------------------------------"
 335         @echo ">>> stage 4: building libraries"
 336         @echo "--------------------------------------------------------------"
 337         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 338 _depend:
 339         @echo
 340         @echo "--------------------------------------------------------------"
 341         @echo ">>> stage 4: make dependencies"
 342         @echo "--------------------------------------------------------------"
 343         cd ${.CURDIR}; ${WMAKE} par-depend
 344 everything:
 345         @echo
 346         @echo "--------------------------------------------------------------"
 347         @echo ">>> stage 4: building everything.."
 348         @echo "--------------------------------------------------------------"
 349         cd ${.CURDIR}; ${WMAKE} par-all
 350
 351
 352 WMAKE_TGTS=
 353 .if !defined(SUBDIR_OVERRIDE)
 354 WMAKE_TGTS+=    _worldtmp _legacy _bootstrap-tools
 355 .endif
 356 WMAKE_TGTS+=    _cleanobj _obj _build-tools
 357 .if !defined(SUBDIR_OVERRIDE)
 358 WMAKE_TGTS+=    _cross-tools
 359 .endif
 360 WMAKE_TGTS+=    _includes _libraries _depend everything
 361
 362 buildworld: ${WMAKE_TGTS}
 363 .ORDER: ${WMAKE_TGTS}
 364
 365 #
 366 # installcheck
 367 #
 368 # Checks to be sure system is ready for installworld
 369 #
 370 installcheck:
 371 .if !defined(NO_SENDMAIL)
 372         @if ! `grep -q '^smmsp:' /etc/passwd`; then \
 373                 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
 374                 false; \
 375         fi
 376         @if ! `grep -q '^smmsp:' /etc/group`; then \
 377                 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
 378                 false; \
 379         fi
 380 .endif
 381 .if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \
 382     (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/")
 383         @echo "Checking to see if your booted kernel is fresh enough.."
 384         ${.OBJDIR}/bin/sh/sh -c \
 385             'echo "Testing installed kernel for new sigaction(2) syscall"'
 386         @echo "Seems ok.."
 387 .endif
 388
 389 #
 390 # distributeworld
 391 #
 392 # Distributes everything compiled by a `buildworld'.
 393 #
 394 # installworld
 395 #
 396 # Installs everything compiled by a 'buildworld'.
 397 #
 398 distributeworld installworld: installcheck
 399         mkdir -p ${INSTALLTMP}
 400         for prog in [ awk cap_mkdb cat chflags chmod chown \
 401             date echo egrep find grep \
 402             ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
 403             test true uname wc zic; do \
 404                 cp `which $$prog` ${INSTALLTMP}; \
 405         done
 406         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 407         rm -rf ${INSTALLTMP}
 408
 409 #
 410 # reinstall
 411 #
 412 # If you have a build server, you can NFS mount the source and obj directories
 413 # and do a 'make reinstall' on the *client* to install new binaries from the
 414 # most recent server build.
 415 #
 416 reinstall:
 417         @echo "--------------------------------------------------------------"
 418         @echo ">>> Making hierarchy"
 419         @echo "--------------------------------------------------------------"
 420         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 421         @echo
 422         @echo "--------------------------------------------------------------"
 423         @echo ">>> Installing everything.."
 424         @echo "--------------------------------------------------------------"
 425         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 426 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 427         @echo
 428         @echo "--------------------------------------------------------------"
 429         @echo ">>> Rebuilding man page indices"
 430         @echo "--------------------------------------------------------------"
 431         cd ${.CURDIR}/share/man; ${MAKE} makedb
 432 .endif
 433
 434 redistribute:
 435         @echo "--------------------------------------------------------------"
 436         @echo ">>> Distributing everything.."
 437         @echo "--------------------------------------------------------------"
 438         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 439
 440 #
 441 # buildkernel and installkernel
 442 #
 443 # Which kernels to build and/or install is specified by setting
 444 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 445 # Only the existing (depending TARGET) config files are used
 446 # for building kernels and only the first of these is designated
 447 # as the one being installed.
 448 #
 449 # Note that we have to use TARGET instead of TARGET_ARCH when
 450 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 451 # be set to cross-build, we have to make sure TARGET is set
 452 # properly.
 453
 454 .if !defined(KERNCONF) && defined(KERNEL)
 455 KERNCONF=       ${KERNEL}
 456 KERNWARN=       yes
 457 .else
 458 KERNCONF?=      GENERIC
 459 .endif
 460 INSTKERNNAME?=  kernel
 461
 462 KERNSRCDIR?=    ${.CURDIR}/sys
 463 KRNLCONFDIR=    ${KERNSRCDIR}/${TARGET}/conf
 464 KRNLOBJDIR=     ${OBJTREE}${KERNSRCDIR}
 465 KERNCONFDIR?=   ${KRNLCONFDIR}
 466
 467 BUILDKERNELS=
 468 INSTALLKERNEL=
 469 .for _kernel in ${KERNCONF}
 470 .if exists(${KERNCONFDIR}/${_kernel})
 471 BUILDKERNELS+=  ${_kernel}
 472 .if empty(INSTALLKERNEL)
 473 INSTALLKERNEL= ${_kernel}
 474 .endif
 475 .endif
 476 .endfor
 477
 478 #
 479 # buildkernel
 480 #
 481 # Builds all kernels defined by BUILDKERNELS.
 482 #
 483 buildkernel:
 484 .if empty(BUILDKERNELS)
 485         @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF}).";
 486         @false
 487 .endif
 488 .if defined(KERNWARN)
 489         @echo "--------------------------------------------------------------"
 490         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 491         @echo "--------------------------------------------------------------"
 492         @sleep 3
 493 .endif
 494         @echo
 495 .for _kernel in ${BUILDKERNELS}
 496         @echo "--------------------------------------------------------------"
 497         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 498         @echo "--------------------------------------------------------------"
 499         @echo "===> ${_kernel}"
 500         mkdir -p ${KRNLOBJDIR}
 501 .if !defined(NO_KERNELCONFIG)
 502         cd ${KRNLCONFDIR}; \
 503                 PATH=${TMPPATH} \
 504                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 505                         ${KERNCONFDIR}/${_kernel}
 506 .endif
 507 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 508         cd ${KRNLOBJDIR}/${_kernel}; \
 509             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR}
 510 .endif
 511         cd ${KRNLOBJDIR}/${_kernel}; \
 512             MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
 513             ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
 514         cd ${KRNLOBJDIR}/${_kernel}; \
 515             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj
 516 # XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
 517 .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
 518 .for target in obj depend all
 519         cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \
 520             MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
 521             ${MAKE} -DNO_CPU_CFLAGS ${target}
 522 .endfor
 523 .endif
 524 .if !defined(NO_KERNELDEPEND)
 525         cd ${KRNLOBJDIR}/${_kernel}; \
 526             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ
 527 .endif
 528         cd ${KRNLOBJDIR}/${_kernel}; \
 529             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ
 530         @echo "--------------------------------------------------------------"
 531         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 532         @echo "--------------------------------------------------------------"
 533 .endfor
 534
 535 #
 536 # installkernel
 537 #
 538 # Install the kernel defined by INSTALLKERNEL
 539 #
 540 installkernel reinstallkernel:
 541 .if empty(INSTALLKERNEL)
 542         @echo "ERROR: No kernel \"${KERNCONF}\" to install."
 543         @false
 544 .endif
 545         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 546             ${CROSSENV} PATH=${TMPPATH} \
 547             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 548
 549 #
 550 # update
 551 #
 552 # Update the source tree, by running sup and/or running cvs to update to the
 553 # latest copy.
 554 #
 555 update:
 556 .if defined(SUP_UPDATE)
 557         @echo "--------------------------------------------------------------"
 558         @echo ">>> Running ${SUP}"
 559         @echo "--------------------------------------------------------------"
 560 .if defined(SUPFILE)
 561         @${SUP} ${SUPFLAGS} ${SUPFILE}
 562 .endif
 563 .if defined(SUPFILE1)
 564         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 565 .endif
 566 .if defined(SUPFILE2)
 567         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 568 .endif
 569 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 570         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 571 .endif
 572 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 573         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 574 .endif
 575 .endif
 576 .if defined(CVS_UPDATE)
 577         @echo "--------------------------------------------------------------"
 578         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 579         @echo "--------------------------------------------------------------"
 580         cd ${.CURDIR}; ${CVS} -R -q update -A -P -d
 581 .endif
 582
 583 #
 584 # most
 585 #
 586 # Build most of the user binaries on the existing system libs and includes.
 587 #
 588 most:
 589         @echo "--------------------------------------------------------------"
 590         @echo ">>> Building programs only"
 591         @echo "--------------------------------------------------------------"
 592 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
 593         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 594 .endfor
 595
 596 #
 597 # installmost
 598 #
 599 # Install the binaries built by the 'most' target.  This does not include
 600 # libraries or include files.
 601 #
 602 installmost:
 603         @echo "--------------------------------------------------------------"
 604         @echo ">>> Installing programs only"
 605         @echo "--------------------------------------------------------------"
 606 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
 607         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 608 .endfor
 609
 610 #
 611 # ------------------------------------------------------------------------
 612 #
 613 # From here onwards are utility targets used by the 'make world' and
 614 # related targets.  If your 'world' breaks, you may like to try to fix
 615 # the problem and manually run the following targets to attempt to
 616 # complete the build.  Beware, this is *not* guaranteed to work, you
 617 # need to have a pretty good grip on the current state of the system
 618 # to attempt to manually finish it.  If in doubt, 'make world' again.
 619 #
 620
 621 #
 622 # legacy: Build compatibility shims for the next three targets
 623 #
 624 legacy:
 625 .for _tool in tools/build
 626         @${ECHODIR} "===> ${_tool}"; \
 627             cd ${.CURDIR}/${_tool}; \
 628             ${MAKE} DIRPRFX=${_tool}/ obj; \
 629             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
 630             ${MAKE} DIRPRFX=${_tool}/ depend; \
 631             ${MAKE} DIRPRFX=${_tool}/ all; \
 632             ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 633 .endfor
 634
 635 #
 636 # bootstrap-tools: Build tools needed for compatibility
 637 #
 638 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 639 _strfile=       games/fortune/strfile
 640 .endif
 641
 642 .if ${BOOTSTRAPPING} < 500113
 643 _groff=         gnu/usr.bin/groff
 644 .else
 645 _groff=         gnu/usr.bin/groff/tmac
 646 .endif
 647
 648 .if ( ${BOOTSTRAPPING} < 450005 || \
 649     ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 ))
 650 _uudecode=      usr.bin/uudecode
 651 .endif
 652
 653 .if ( ${BOOTSTRAPPING} < 430002 || \
 654     ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 ))
 655 _xargs=         usr.bin/xargs
 656 .endif
 657
 658 .if ( ${BOOTSTRAPPING} < 430002 || \
 659     ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 ))
 660 _yacc=          usr.bin/yacc
 661 .endif
 662
 663 .if ${BOOTSTRAPPING} < 500019
 664 _kbdcontrol=    usr.sbin/kbdcontrol
 665 .endif
 666
 667 bootstrap-tools:
 668 .for _tool in ${_strfile} usr.bin/colldef \
 669     usr.bin/makewhatis usr.bin/rpcgen ${_uudecode} \
 670     ${_xargs} usr.bin/xinstall ${_yacc} \
 671     usr.sbin/config ${_kbdcontrol} \
 672     gnu/usr.bin/gperf ${_groff} gnu/usr.bin/texinfo
 673         @${ECHODIR} "===> ${_tool}"; \
 674                 cd ${.CURDIR}/${_tool}; \
 675                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 676                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 677                 ${MAKE} DIRPRFX=${_tool}/ all; \
 678                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
 679 .endfor
 680
 681 #
 682 # build-tools: Build special purpose build tools
 683 #
 684 .if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
 685 _aicasm= sys/modules/aic7xxx/aicasm
 686 .endif
 687
 688 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 689 _share= share/syscons/scrnmaps
 690 .endif
 691
 692 .if !defined(NO_FORTRAN)
 693 _fortran= gnu/usr.bin/cc/f771
 694 .endif
 695
 696 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 697     !defined(NOCRYPT) && !defined(NO_KERBEROS)
 698 _libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
 699     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 700 .endif
 701
 702 build-tools:
 703 .for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \
 704     ${_libkrb5} lib/libncurses ${_share} \
 705     ${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall
 706         @${ECHODIR} "===> ${_tool}"; \
 707                 cd ${.CURDIR}/${_tool}; \
 708                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 709                 ${MAKE} DIRPRFX=${_tool}/ build-tools
 710 .endfor
 711
 712 #
 713 # cross-tools: Build cross-building tools
 714 #
 715 .if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH}
 716 _elf2exe=       usr.sbin/elf2exe
 717 .endif
 718
 719 .if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH}
 720 _btxld= usr.sbin/btxld
 721 .if defined(RELEASEDIR)
 722 _kgzip= usr.sbin/kgzip
 723 .endif
 724 .endif
 725
 726 .if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \
 727     ${BOOTSTRAPPING} < 500037
 728 _elf2aout=      usr.bin/elf2aout
 729 .endif
 730
 731 .if defined(RELEASEDIR)
 732 _crunchide=     usr.sbin/crunch/crunchide
 733 .endif
 734
 735 _xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint
 736
 737 cross-tools:
 738 .for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \
 739     gnu/usr.bin/binutils ${_crunchide} \
 740     gnu/usr.bin/cc ${_xlint} ${_kgzip}
 741         @${ECHODIR} "===> ${_tool}"; \
 742                 cd ${.CURDIR}/${_tool}; \
 743                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 744                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 745                 ${MAKE} DIRPRFX=${_tool}/ all; \
 746                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
 747 .endfor
 748
 749 #
 750 # hierarchy - ensure that all the needed directories are present
 751 #
 752 hierarchy:
 753         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 754
 755 #
 756 # libraries - build all libraries, and install them under ${DESTDIR}.
 757 #
 758 # The list of libraries with dependents (${_prebuild_libs}) and their
 759 # interdependencies (__L) are built automatically by the
 760 # ${.CURDIR}/tools/make_libdeps.sh script.
 761 #
 762 libraries:
 763         cd ${.CURDIR}; \
 764             ${MAKE} -f Makefile.inc1 _startup_libs; \
 765             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 766             ${MAKE} -f Makefile.inc1 _generic_libs;
 767
 768 # These dependencies are not automatically generated:
 769 #
 770 # gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
 771 # shared libraries for ELF.
 772 #
 773 _startup_libs=  gnu/lib/csu gnu/lib/libgcc
 774 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
 775 _startup_libs+= lib/csu/${MACHINE_ARCH}-elf
 776 .else
 777 _startup_libs+= lib/csu/${MACHINE_ARCH}
 778 .endif
 779
 780 _prebuild_libs=
 781
 782 _generic_libs=  gnu/lib
 783
 784 .if !defined(NOCRYPT) && !defined(NO_KERBEROS)
 785 _prebuild_libs+=        kerberos5/lib/libasn1
 786 _prebuild_libs+=        kerberos5/lib/libgssapi
 787 _prebuild_libs+=        kerberos5/lib/libkrb5
 788 _prebuild_libs+=        kerberos5/lib/libroken
 789 _generic_libs+= kerberos5/lib
 790 .endif
 791
 792 _prebuild_libs+= lib/libbsdxml lib/libcom_err lib/libcrypt \
 793                 lib/libkvm lib/libmd \
 794                 lib/libncurses lib/libopie lib/libpam lib/libradius \
 795                 lib/librpcsvc \
 796                 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
 797                 lib/libz lib/msun
 798
 799 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 800 lib/libypclnt__L: lib/librpcsvc__L
 801
 802 _generic_libs+= lib
 803
 804 .if !defined(NOCRYPT) && !defined(NOSECURE)
 805 .if !defined(NO_OPENSSL)
 806 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 807 .if !defined(NO_OPENSSH)
 808 _prebuild_libs+=        secure/lib/libssh
 809 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 810 .endif
 811 .endif
 812 _generic_libs+= secure/lib
 813 .endif
 814
 815 _generic_libs+= usr.bin/lex/lib
 816
 817 .if ${MACHINE_ARCH} == "i386"
 818 _generic_libs+= usr.sbin/pcvt/keycap
 819 .endif
 820
 821 .for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
 822 ${_lib}__L: .PHONY
 823 .if exists(${.CURDIR}/${_lib})
 824         @${ECHODIR} "===> ${_lib}"; \
 825                 cd ${.CURDIR}/${_lib}; \
 826                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 827                 ${MAKE} DIRPRFX=${_lib}/ all; \
 828                 ${MAKE} DIRPRFX=${_lib}/ install
 829 .endif
 830 .endfor
 831
 832 # libpam is special: we need to build static PAM modules before
 833 # static PAM library, and dynamic PAM library before dynamic PAM
 834 # modules.
 835 lib/libpam__L: .PHONY
 836         @${ECHODIR} "===> lib/libpam"; \
 837                 cd ${.CURDIR}/lib/libpam; \
 838                 ${MAKE} DIRPRFX=lib/libpam/ depend; \
 839                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
 840                 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
 841
 842 _startup_libs: ${_startup_libs:S/$/__L/}
 843 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 844 _generic_libs: ${_generic_libs:S/$/__L/}
 845
 846 .for __target in all clean cleandepend cleandir depend includes obj
 847 .for entry in ${SUBDIR}
 848 ${entry}.${__target}__D: .PHONY
 849         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 850                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 851                 edir=${entry}.${MACHINE_ARCH}; \
 852                 cd ${.CURDIR}/$${edir}; \
 853         else \
 854                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 855                 edir=${entry}; \
 856                 cd ${.CURDIR}/$${edir}; \
 857         fi; \
 858         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 859 .endfor
 860 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 861 .endfor
 862
 863 .include <bsd.subdir.mk>