Makefile.inc1

   1 #
   2 # $FreeBSD$
   3 #
   4 # Make command line options:
   5 #       -DMAKE_KERBEROS4 to build KerberosIV
   6 #       -DMAKE_KERBEROS5 to build Kerberos5
   7 #       -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
   8 #       -DNOCLEAN do not clean at all
   9 #       -DNOCRYPT will prevent building of crypt versions
  10 #       -DNOPROFILE do not build profiled libraries
  11 #       -DNOSECURE do not go into secure subdir
  12 #       -DNOGAMES do not go into games subdir
  13 #       -DNOSHARE do not go into share subdir
  14 #       -DNOINFO do not make or install info files
  15 #       -DNOLIBC_R do not build libc_r.
  16 #       -DNO_FORTRAN do not build g77 and related libraries.
  17 #       -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
  18 #       -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
  19 #       -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
  20 #       -DNO_PORTSUPDATE do not update ports in ${MAKE} update
  21 #       -DNO_DOCUPDATE do not update doc in ${MAKE} update
  22 #       LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
  23 #       TARGET_ARCH="arch" to crossbuild world to a different arch
  24
  25 #
  26 # The intended user-driven targets are:
  27 # buildworld  - rebuild *everything*, including glue to help do upgrades
  28 # installworld- install everything built by "buildworld"
  29 # update      - convenient way to update your source tree (eg: sup/cvs)
  30 # most        - build user commands, no libraries or include files
  31 # installmost - install user commands, no libraries or include files
  32 #
  33 # Standard targets (not defined here) are documented in the makefiles in
  34 # /usr/share/mk.  These include:
  35 #               obj depend all install clean cleandepend cleanobj
  36
  37 # Put initial settings here.
  38 SUBDIR=
  39
  40 # We must do share/info early so that installation of info `dir'
  41 # entries works correctly.  Do it first since it is less likely to
  42 # grow dependencies on include and lib than vice versa.
  43 .if exists(${.CURDIR}/share/info)
  44 SUBDIR+= share/info
  45 .endif
  46
  47 # We must do include and lib early so that the perl *.ph generation
  48 # works correctly as it uses the header files installed by this.
  49 .if exists(${.CURDIR}/include)
  50 SUBDIR+= include
  51 .endif
  52 .if exists(${.CURDIR}/lib)
  53 SUBDIR+= lib
  54 .endif
  55
  56 .if exists(${.CURDIR}/bin)
  57 SUBDIR+= bin
  58 .endif
  59 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
  60 SUBDIR+= games
  61 .endif
  62 .if exists(${.CURDIR}/gnu)
  63 SUBDIR+= gnu
  64 .endif
  65 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
  66     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
  67 SUBDIR+= kerberosIV
  68 .endif
  69 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  70     !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
  71 SUBDIR+= kerberos5
  72 .endif
  73 .if exists(${.CURDIR}/libexec)
  74 SUBDIR+= libexec
  75 .endif
  76 .if exists(${.CURDIR}/sbin)
  77 SUBDIR+= sbin
  78 .endif
  79 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
  80 SUBDIR+= share
  81 .endif
  82 .if exists(${.CURDIR}/sys)
  83 SUBDIR+= sys
  84 .endif
  85 .if exists(${.CURDIR}/usr.bin)
  86 SUBDIR+= usr.bin
  87 .endif
  88 .if exists(${.CURDIR}/usr.sbin)
  89 SUBDIR+= usr.sbin
  90 .endif
  91 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
  92 SUBDIR+= secure
  93 .endif
  94
  95 # etc must be last for "distribute" to work
  96 .if exists(${.CURDIR}/etc)
  97 SUBDIR+= etc
  98 .endif
  99
 100 # These are last, since it is nice to at least get the base system
 101 # rebuilt before you do them.
 102 .if defined(LOCAL_DIRS)
 103 .for _DIR in ${LOCAL_DIRS}
 104 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
 105 SUBDIR+= ${_DIR}
 106 .endif
 107 .endfor
 108 .endif
 109
 110 .if defined(NOCLEANDIR)
 111 CLEANDIR=       clean cleandepend
 112 .else
 113 CLEANDIR=       cleandir
 114 .endif
 115
 116 SUP?=           cvsup
 117 SUPFLAGS?=      -g -L 2 -P -
 118 .if defined(SUPHOST)
 119 SUPFLAGS+=      -h ${SUPHOST}
 120 .endif
 121
 122 MAKEOBJDIRPREFIX?=      /usr/obj
 123 TARGET_ARCH?=   ${MACHINE_ARCH}
 124 TARGET?=        ${MACHINE}
 125 .if make(buildworld)
 126 BUILD_ARCH!=    sysctl -n hw.machine_arch
 127 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 128 .error To cross-build, set TARGET_ARCH.
 129 .endif
 130 .endif
 131 .if ${MACHINE_ARCH} == ${TARGET_ARCH}
 132 OBJTREE=        ${MAKEOBJDIRPREFIX}
 133 .else
 134 OBJTREE=        ${MAKEOBJDIRPREFIX}/${TARGET_ARCH}
 135 .endif
 136 WORLDTMP=       ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
 137 # /usr/games added for fortune which depend on strfile
 138 STRICTTMPPATH=  ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
 139 TMPPATH=        ${STRICTTMPPATH}:${PATH}
 140 OBJFORMAT_PATH?=        /usr/libexec
 141
 142 TMPDIR?=        /tmp
 143 TMPPID!=        echo $$$$
 144 INSTALLTMP=     ${TMPDIR}/install.${TMPPID}
 145
 146 #
 147 # Building a world goes through the following stages
 148 #
 149 # 1. bootstrap-tool stage [BMAKE]
 150 #       This stage is responsible for creating programs that
 151 #       are needed for backward compatibility reasons. They
 152 #       are not built as cross-tools.
 153 # 2. build-tool stage [TMAKE]
 154 #       This stage is responsible for creating the object
 155 #       tree and building any tools that are needed during
 156 #       the build process.
 157 # 3. cross-tool stage [XMAKE]
 158 #       This stage is responsible for creating any tools that
 159 #       are needed for cross-builds. A cross-compiler is one
 160 #       of them.
 161 # 4. world stage [WMAKE]
 162 #       This stage actually builds the world.
 163 # 5. install stage (optional) [IMAKE]
 164 #       This stage installs a previously built world.
 165 #
 166
 167 # Common environment for world related stages
 168 CROSSENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 169                 MACHINE_ARCH=${TARGET_ARCH} \
 170                 MACHINE=${TARGET} \
 171                 COMPILER_PATH=${WORLDTMP}/usr/libexec:${WORLDTMP}/usr/bin \
 172                 LIBRARY_PATH=${WORLDTMP}${SHLIBDIR}:${WORLDTMP}/usr/lib \
 173                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
 174                 CFLAGS="-nostdinc ${CFLAGS}" \
 175                 CXXINCLUDES="-nostdinc++ ${CXXINCLUDES}" \
 176                 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.6.0 \
 177                 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
 178                 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
 179                 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
 180
 181 # bootstrap-tool stage
 182 BMAKEENV=       MAKEOBJDIRPREFIX=${WORLDTMP} \
 183                 DESTDIR= \
 184                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 185 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 186                 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED
 187
 188 # build-tool stage
 189 TMAKEENV=       MAKEOBJDIRPREFIX=${OBJTREE} \
 190                 DESTDIR= \
 191                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 192 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1
 193
 194 # cross-tool stage
 195 XMAKE=          TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
 196
 197 # world stage
 198 WMAKEENV=       ${CROSSENV} \
 199                 DESTDIR=${WORLDTMP} \
 200                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 201                 PATH=${TMPPATH}
 202 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 203
 204 # install stage
 205 IMAKEENV=       ${CROSSENV} \
 206                 PATH=${STRICTTMPPATH}:${INSTALLTMP}
 207 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 208
 209 # kernel stage
 210 KMAKEENV=       ${WMAKEENV} \
 211                 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
 212
 213 USRDIRS=        usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
 214                 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
 215                 usr/share/dict \
 216                 usr/share/groff_font/devX100 \
 217                 usr/share/groff_font/devX100-12 \
 218                 usr/share/groff_font/devX75 \
 219                 usr/share/groff_font/devX75-12 \
 220                 usr/share/groff_font/devascii \
 221                 usr/share/groff_font/devcp1047 \
 222                 usr/share/groff_font/devdvi \
 223                 usr/share/groff_font/devhtml \
 224                 usr/share/groff_font/devkoi8-r \
 225                 usr/share/groff_font/devlatin1 \
 226                 usr/share/groff_font/devlbp \
 227                 usr/share/groff_font/devlj4 \
 228                 usr/share/groff_font/devps \
 229                 usr/share/groff_font/devutf8 \
 230                 usr/share/tmac/mdoc usr/share/tmac/mm
 231
 232 INCDIRS=        arpa g++/std isc objc protocols readline rpc rpcsvc openssl \
 233                 security
 234
 235 #
 236 # buildworld
 237 #
 238 # Attempt to rebuild the entire system, with reasonable chance of
 239 # success, regardless of how old your existing system is.
 240 #
 241 buildworld:
 242         @echo
 243         @echo "--------------------------------------------------------------"
 244         @echo ">>> Rebuilding the temporary build tree"
 245         @echo "--------------------------------------------------------------"
 246 .if !defined(NOCLEAN)
 247         rm -rf ${WORLDTMP}
 248 .endif
 249 .for _dir in ${USRDIRS}
 250         mkdir -p ${WORLDTMP}/${_dir}
 251 .endfor
 252 .for _dir in ${INCDIRS}
 253         mkdir -p ${WORLDTMP}/usr/include/${_dir}
 254 .endfor
 255         ln -sf ${.CURDIR}/sys ${WORLDTMP}
 256         @echo
 257         @echo "--------------------------------------------------------------"
 258         @echo ">>> stage 1: bootstrap tools"
 259         @echo "--------------------------------------------------------------"
 260         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 261 .if !defined(NOCLEAN)
 262         @echo
 263         @echo "--------------------------------------------------------------"
 264         @echo ">>> stage 2: cleaning up the object tree"
 265         @echo "--------------------------------------------------------------"
 266         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 267 .endif
 268         @echo
 269         @echo "--------------------------------------------------------------"
 270         @echo ">>> stage 2: rebuilding the object tree"
 271         @echo "--------------------------------------------------------------"
 272         cd ${.CURDIR}; ${WMAKE} par-obj
 273         @echo
 274         @echo "--------------------------------------------------------------"
 275         @echo ">>> stage 2: build tools"
 276         @echo "--------------------------------------------------------------"
 277         cd ${.CURDIR}; ${TMAKE} build-tools
 278         @echo
 279         @echo "--------------------------------------------------------------"
 280         @echo ">>> stage 3: cross tools"
 281         @echo "--------------------------------------------------------------"
 282         cd ${.CURDIR}; ${XMAKE} cross-tools
 283         @echo
 284         @echo "--------------------------------------------------------------"
 285         @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
 286         @echo "--------------------------------------------------------------"
 287         cd ${.CURDIR}; ${WMAKE} SHARED=copies includes
 288         @echo
 289         @echo "--------------------------------------------------------------"
 290         @echo ">>> stage 4: building libraries"
 291         @echo "--------------------------------------------------------------"
 292         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 293         @echo
 294         @echo "--------------------------------------------------------------"
 295         @echo ">>> stage 4: make dependencies"
 296         @echo "--------------------------------------------------------------"
 297         cd ${.CURDIR}; ${WMAKE} par-depend
 298         @echo
 299         @echo "--------------------------------------------------------------"
 300         @echo ">>> stage 4: building everything.."
 301         @echo "--------------------------------------------------------------"
 302         cd ${.CURDIR}; ${WMAKE} all
 303
 304 everything:
 305         @echo "--------------------------------------------------------------"
 306         @echo ">>> Building everything.."
 307         @echo "--------------------------------------------------------------"
 308         cd ${.CURDIR}; ${WMAKE} all
 309
 310 #
 311 # installworld
 312 #
 313 # Installs everything compiled by a 'buildworld'.
 314 #
 315 installworld:
 316         mkdir -p ${INSTALLTMP}
 317         for prog in [ awk cat chflags chmod chown date echo egrep find grep \
 318             ln make makewhatis mkdir mtree mv perl rm sed sh sysctl \
 319             test true uname wc zic; do \
 320                 cp `which $$prog` ${INSTALLTMP}; \
 321         done
 322         cd ${.CURDIR}; ${IMAKE} reinstall
 323         rm -rf ${INSTALLTMP}
 324
 325 #
 326 # reinstall
 327 #
 328 # If you have a build server, you can NFS mount the source and obj directories
 329 # and do a 'make reinstall' on the *client* to install new binaries from the
 330 # most recent server build.
 331 #
 332 reinstall:
 333         @echo "--------------------------------------------------------------"
 334         @echo ">>> Making hierarchy"
 335         @echo "--------------------------------------------------------------"
 336         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 337         @echo
 338         @echo "--------------------------------------------------------------"
 339         @echo ">>> Installing everything.."
 340         @echo "--------------------------------------------------------------"
 341         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 342 .if !defined(NOMAN)
 343         @echo
 344         @echo "--------------------------------------------------------------"
 345         @echo ">>> Rebuilding man page indices"
 346         @echo "--------------------------------------------------------------"
 347         cd ${.CURDIR}/share/man; ${MAKE} makedb
 348 .endif
 349
 350 #
 351 # distribworld
 352 #
 353 # Front-end to distribute to make sure the search path contains
 354 # the object directory. Needed for miniperl.
 355 #
 356 distribworld:
 357         cd ${.CURDIR}; PATH=${TMPPATH} ${MAKE} -f Makefile.inc1 distribute
 358
 359 #
 360 # buildkernel and installkernel
 361 #
 362 # Which kernels to build and/or install is specified by setting
 363 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 364 # Only the existing (depending TARGET) config files are used
 365 # for building kernels and only the first of these is designated
 366 # as the one being installed.
 367 #
 368 # Note that we have to use TARGET instead of TARGET_ARCH when
 369 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 370 # be set to cross-build, we have to make sure TARGET is set
 371 # properly.
 372
 373 .if !defined(KERNCONF) && defined(KERNEL)
 374 KERNCONF=       ${KERNEL}
 375 KERNWARN=       yes
 376 .else
 377 KERNCONF?=      GENERIC
 378 .endif
 379 INSTKERNNAME?=  kernel
 380
 381 # The only exotic TARGET_ARCH/TARGET combination valid at this
 382 # time is i386/pc98. In all other cases set TARGET equal to
 383 # TARGET_ARCH.
 384 .if ${TARGET_ARCH} != "i386" || ${TARGET} != "pc98"
 385 TARGET=         ${TARGET_ARCH}
 386 .endif
 387
 388 KRNLSRCDIR=     ${.CURDIR}/sys
 389 KRNLCONFDIR=    ${KRNLSRCDIR}/${TARGET}/conf
 390 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 391 KERNCONFDIR?=   ${KRNLCONFDIR}
 392
 393 BUILDKERNELS=
 394 INSTALLKERNEL=
 395 .for _kernel in ${KERNCONF}
 396 .if exists(${KERNCONFDIR}/${_kernel})
 397 BUILDKERNELS+=  ${_kernel}
 398 .if empty(INSTALLKERNEL)
 399 INSTALLKERNEL= ${_kernel}
 400 .endif
 401 .endif
 402 .endfor
 403
 404 #
 405 # buildkernel
 406 #
 407 # Builds all kernels defined by BUILDKERNELS.
 408 #
 409 buildkernel:
 410 .if empty(BUILDKERNELS)
 411         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 412         @false
 413 .endif
 414 .if defined(KERNWARN)
 415         @echo "--------------------------------------------------------------"
 416         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 417         @echo "--------------------------------------------------------------"
 418         @sleep 3
 419 .endif
 420         @echo
 421 .for _kernel in ${BUILDKERNELS}
 422         @echo "--------------------------------------------------------------"
 423         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 424         @echo "--------------------------------------------------------------"
 425         @echo "===> ${_kernel}"
 426         mkdir -p ${KRNLOBJDIR}
 427 .if !defined(NO_KERNELCONFIG)
 428         cd ${KRNLCONFDIR}; \
 429                 PATH=${TMPPATH} \
 430                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 431                         ${KERNCONFDIR}/${_kernel}
 432 .endif
 433 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 434         cd ${KRNLOBJDIR}/${_kernel}; \
 435             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} clean
 436 .endif
 437         cd ${KRNLOBJDIR}/${_kernel}; \
 438                 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
 439                     ${MAKE} -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
 440 .if !defined(NO_KERNELDEPEND)
 441         cd ${KRNLOBJDIR}/${_kernel}; \
 442             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 443 .endif
 444         cd ${KRNLOBJDIR}/${_kernel}; \
 445             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 446         @echo "--------------------------------------------------------------"
 447         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 448         @echo "--------------------------------------------------------------"
 449 .endfor
 450
 451 #
 452 # installkernel
 453 #
 454 # Install the kernel defined by INSTALLKERNEL
 455 #
 456 installkernel:
 457         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 458             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} install
 459 reinstallkernel:
 460         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 461             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} reinstall
 462
 463 #
 464 # kernel
 465 #
 466 # Short hand for `make buildkernel installkernel'
 467 #
 468 kernel: buildkernel installkernel
 469
 470 #
 471 # update
 472 #
 473 # Update the source tree, by running sup and/or running cvs to update to the
 474 # latest copy.
 475 #
 476 update:
 477 .if defined(SUP_UPDATE)
 478         @echo "--------------------------------------------------------------"
 479         @echo ">>> Running ${SUP}"
 480         @echo "--------------------------------------------------------------"
 481 .if defined(SUPFILE)
 482         @${SUP} ${SUPFLAGS} ${SUPFILE}
 483 .endif
 484 .if defined(SUPFILE1)
 485         @${SUP} ${SUPFLAGS} ${SUPFILE1}
 486 .endif
 487 .if defined(SUPFILE2)
 488         @${SUP} ${SUPFLAGS} ${SUPFILE2}
 489 .endif
 490 .if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
 491         @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
 492 .endif
 493 .if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
 494         @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
 495 .endif
 496 .endif
 497 .if defined(CVS_UPDATE)
 498         @echo "--------------------------------------------------------------"
 499         @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
 500         @echo "--------------------------------------------------------------"
 501         cd ${.CURDIR}; cvs -q update -A -P -d
 502 .endif
 503
 504 #
 505 # most
 506 #
 507 # Build most of the user binaries on the existing system libs and includes.
 508 #
 509 most:
 510         @echo "--------------------------------------------------------------"
 511         @echo ">>> Building programs only"
 512         @echo "--------------------------------------------------------------"
 513         cd ${.CURDIR}/bin;              ${MAKE} all
 514         cd ${.CURDIR}/sbin;             ${MAKE} all
 515         cd ${.CURDIR}/libexec;          ${MAKE} all
 516         cd ${.CURDIR}/usr.bin;          ${MAKE} all
 517         cd ${.CURDIR}/usr.sbin;         ${MAKE} all
 518         cd ${.CURDIR}/gnu/libexec;      ${MAKE} all
 519         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} all
 520         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} all
 521
 522 #
 523 # installmost
 524 #
 525 # Install the binaries built by the 'most' target.  This does not include
 526 # libraries or include files.
 527 #
 528 installmost:
 529         @echo "--------------------------------------------------------------"
 530         @echo ">>> Installing programs only"
 531         @echo "--------------------------------------------------------------"
 532         cd ${.CURDIR}/bin;              ${MAKE} install
 533         cd ${.CURDIR}/sbin;             ${MAKE} install
 534         cd ${.CURDIR}/libexec;          ${MAKE} install
 535         cd ${.CURDIR}/usr.bin;          ${MAKE} install
 536         cd ${.CURDIR}/usr.sbin;         ${MAKE} install
 537         cd ${.CURDIR}/gnu/libexec;      ${MAKE} install
 538         cd ${.CURDIR}/gnu/usr.bin;      ${MAKE} install
 539         cd ${.CURDIR}/gnu/usr.sbin;     ${MAKE} install
 540
 541 #
 542 # ------------------------------------------------------------------------
 543 #
 544 # From here onwards are utility targets used by the 'make world' and
 545 # related targets.  If your 'world' breaks, you may like to try to fix
 546 # the problem and manually run the following targets to attempt to
 547 # complete the build.  Beware, this is *not* guaranteed to work, you
 548 # need to have a pretty good grip on the current state of the system
 549 # to attempt to manually finish it.  If in doubt, 'make world' again.
 550 #
 551
 552 #
 553 # bootstrap-tools: Build tools needed for compatibility
 554 #
 555 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 556 _strfile=       games/fortune/strfile
 557 .endif
 558
 559 bootstrap-tools:
 560 .for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
 561     usr.sbin/config usr.sbin/kbdcontrol \
 562     gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
 563         cd ${.CURDIR}/${_tool}; \
 564                 ${MAKE} obj; \
 565                 ${MAKE} depend; \
 566                 ${MAKE} all; \
 567                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 568 .endfor
 569
 570 #
 571 # build-tools: Build special purpose build tools
 572 #
 573 .if exists(${.CURDIR}/games) && !defined(NOGAMES)
 574 _games= games/adventure games/hack games/phantasia
 575 .endif
 576
 577 .if exists(${.CURDIR}/share) && !defined(NOSHARE)
 578 _share= share/syscons/scrnmaps
 579 .endif
 580
 581 .if !defined(NO_FORTRAN)
 582 _fortran= gnu/usr.bin/cc/f771
 583 .endif
 584
 585 .if !defined(NOPERL)
 586 _perl=  gnu/usr.bin/perl/miniperl
 587 .endif
 588
 589 .if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
 590     !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 591 _libroken4= kerberosIV/lib/libroken
 592 .endif
 593
 594 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 595     !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 596 _libkrb5= kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 597 .endif
 598
 599 build-tools:
 600 .for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
 601     ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} usr.bin/awk \
 602         usr.bin/file usr.sbin/sysinstall
 603         cd ${.CURDIR}/${_tool}; ${MAKE} build-tools
 604 .endfor
 605
 606 #
 607 # cross-tools: Build cross-building tools
 608 #
 609 .if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
 610 _elf2exe=       usr.sbin/elf2exe
 611 .endif
 612
 613 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 614 _btxld= usr.sbin/btxld
 615 .endif
 616
 617 cross-tools:
 618 .for _tool in ${_btxld} ${_elf2exe} \
 619     gnu/usr.bin/binutils usr.bin/objformat gnu/usr.bin/cc
 620         cd ${.CURDIR}/${_tool}; \
 621                 ${MAKE} obj; \
 622                 ${MAKE} depend; \
 623                 ${MAKE} all; \
 624                 ${MAKE} DESTDIR=${MAKEOBJDIRPREFIX} install
 625 .endfor
 626
 627 #
 628 # hierarchy - ensure that all the needed directories are present
 629 #
 630 hierarchy:
 631         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 632
 633 #
 634 # includes - possibly generate and install the include files.
 635 #
 636 includes:
 637         cd ${.CURDIR}/include;                  ${MAKE} -B all install
 638         cd ${.CURDIR}/gnu/include;              ${MAKE} install
 639         cd ${.CURDIR}/gnu/lib/libobjc;          ${MAKE} beforeinstall
 640         cd ${.CURDIR}/gnu/lib/libreadline/readline;     ${MAKE} beforeinstall
 641         cd ${.CURDIR}/gnu/lib/libregex;         ${MAKE} beforeinstall
 642         cd ${.CURDIR}/gnu/lib/libstdc++;        ${MAKE} beforeinstall
 643         cd ${.CURDIR}/gnu/lib/libdialog;        ${MAKE} beforeinstall
 644         cd ${.CURDIR}/gnu/usr.bin/cc/cc1plus;   ${MAKE} beforeinstall
 645 .if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 646 .if exists(${.CURDIR}/secure/lib/libcrypto)
 647         cd ${.CURDIR}/secure/lib/libcrypto;     ${MAKE} beforeinstall
 648 .endif
 649 .if exists(${.CURDIR}/secure/lib/libssl)
 650         cd ${.CURDIR}/secure/lib/libssl;        ${MAKE} beforeinstall
 651 .endif
 652 .endif
 653 .if exists(${.CURDIR}/kerberosIV) && !defined(NOCRYPT) && \
 654     defined(MAKE_KERBEROS4)
 655         cd ${.CURDIR}/kerberosIV/lib/libacl;    ${MAKE} beforeinstall
 656         cd ${.CURDIR}/kerberosIV/lib/libkadm;   ${MAKE} beforeinstall
 657         cd ${.CURDIR}/kerberosIV/lib/libkafs;   ${MAKE} beforeinstall
 658         cd ${.CURDIR}/kerberosIV/lib/libkdb;    ${MAKE} beforeinstall
 659         cd ${.CURDIR}/kerberosIV/lib/libkrb;    ${MAKE} beforeinstall
 660         cd ${.CURDIR}/kerberosIV/lib/libtelnet; ${MAKE} beforeinstall
 661 .elif exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
 662         cd ${.CURDIR}/secure/lib/libtelnet;     ${MAKE} beforeinstall
 663 .else
 664         cd ${.CURDIR}/lib/libtelnet;            ${MAKE} beforeinstall
 665 .endif
 666 .if exists(${.CURDIR}/kerberos5) && !defined(NOCRYPT) && \
 667     defined(MAKE_KERBEROS5)
 668         cd ${.CURDIR}/kerberos5/lib/libasn1;            ${MAKE} beforeinstall
 669         cd ${.CURDIR}/kerberos5/lib/libhdb;             ${MAKE} beforeinstall
 670         cd ${.CURDIR}/kerberos5/lib/libkadm5clnt;       ${MAKE} beforeinstall
 671         cd ${.CURDIR}/kerberos5/lib/libkadm5srv;        ${MAKE} beforeinstall
 672         cd ${.CURDIR}/kerberos5/lib/libkafs5;           ${MAKE} beforeinstall
 673         cd ${.CURDIR}/kerberos5/lib/libkrb5;            ${MAKE} beforeinstall
 674         cd ${.CURDIR}/kerberos5/lib/libsl;              ${MAKE} beforeinstall
 675 .endif
 676 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
 677         cd ${.CURDIR}/lib/csu/${MACHINE_ARCH};  ${MAKE} beforeinstall
 678 .endif
 679         cd ${.CURDIR}/gnu/lib/csu;              ${MAKE} beforeinstall
 680         cd ${.CURDIR}/lib/libalias;             ${MAKE} beforeinstall
 681         cd ${.CURDIR}/lib/libatm;               ${MAKE} beforeinstall
 682         cd ${.CURDIR}/lib/libdevstat;           ${MAKE} beforeinstall
 683         cd ${.CURDIR}/lib/libc;                 ${MAKE} beforeinstall
 684         cd ${.CURDIR}/lib/libcalendar;          ${MAKE} beforeinstall
 685         cd ${.CURDIR}/lib/libcam;               ${MAKE} beforeinstall
 686         cd ${.CURDIR}/lib/libdisk;              ${MAKE} beforeinstall
 687         cd ${.CURDIR}/lib/libedit;              ${MAKE} beforeinstall
 688         cd ${.CURDIR}/lib/libfetch;             ${MAKE} beforeinstall
 689         cd ${.CURDIR}/lib/libftpio;             ${MAKE} beforeinstall
 690         cd ${.CURDIR}/lib/libkvm;               ${MAKE} beforeinstall
 691         cd ${.CURDIR}/lib/libmd;                ${MAKE} beforeinstall
 692         cd ${.CURDIR}/lib/libmp;                ${MAKE} beforeinstall
 693 .if !defined(WANT_CSRG_LIBM)
 694         cd ${.CURDIR}/lib/msun;                 ${MAKE} beforeinstall
 695 .endif
 696         cd ${.CURDIR}/lib/libncp;               ${MAKE} beforeinstall
 697         cd ${.CURDIR}/lib/libncurses;           ${MAKE} beforeinstall
 698         cd ${.CURDIR}/lib/libnetgraph;          ${MAKE} beforeinstall
 699         cd ${.CURDIR}/lib/libopie;              ${MAKE} beforeinstall
 700         cd ${.CURDIR}/lib/libpcap;              ${MAKE} beforeinstall
 701         cd ${.CURDIR}/lib/libradius;            ${MAKE} beforeinstall
 702         cd ${.CURDIR}/lib/librpcsvc;            ${MAKE} beforeinstall
 703         cd ${.CURDIR}/lib/libpam/libpam;        ${MAKE} beforeinstall
 704         cd ${.CURDIR}/lib/libsbuf;              ${MAKE} beforeinstall
 705         cd ${.CURDIR}/lib/libstand;             ${MAKE} beforeinstall
 706         cd ${.CURDIR}/lib/libtacplus;           ${MAKE} beforeinstall
 707         cd ${.CURDIR}/lib/libcom_err;           ${MAKE} beforeinstall
 708         cd ${.CURDIR}/lib/libutil;              ${MAKE} beforeinstall
 709         cd ${.CURDIR}/lib/libvgl;               ${MAKE} beforeinstall
 710         cd ${.CURDIR}/lib/libwrap;              ${MAKE} beforeinstall
 711         cd ${.CURDIR}/lib/libz;                 ${MAKE} beforeinstall
 712         cd ${.CURDIR}/usr.bin/lex;              ${MAKE} beforeinstall
 713
 714 #
 715 # libraries - build all libraries, and install them under ${DESTDIR}.
 716 #
 717 # The following dependencies exist between the libraries:
 718 #
 719 # lib*: csu libgcc_pic
 720 # libatm: libmd
 721 # libcam: libsbuf
 722 # libcrypt: libmd
 723 # libdevstat: libkvm
 724 # libdialog: libncurses
 725 # libedit: libncurses
 726 # libg++: libm
 727 # libkrb: libcrypt
 728 # libopie: libmd
 729 # libpam: libcom_err libcrypt libcrypto libkrb libopie libradius \
 730 #         librpcsvc libtacplus libutil libz libssh
 731 # libradius: libmd
 732 # libreadline: libncurses
 733 # libstc++: libm
 734 # libtacplus: libmd
 735 #
 736 # Across directories this comes down to (rougly):
 737 #
 738 # gnu/lib: lib/libm lib/libncurses
 739 # kerberosIV/lib kerberos5/lib: lib/libcrypt
 740 # lib/libpam: secure/lib/libcrypto kerberosIV/lib/libkrb \
 741 #             secure/lib/libssh lib/libz
 742 # secure/lib: lib/libmd
 743 #
 744 .if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}.pcc)
 745 _csu=   lib/csu/${MACHINE_ARCH}.pcc
 746 .elif ${MACHINE_ARCH} == "i386" && ${OBJFORMAT} == "elf"
 747 _csu=   lib/csu/i386-elf
 748 .else
 749 _csu=   lib/csu/${MACHINE_ARCH}
 750 .endif
 751
 752 .if !defined(NOSECURE) && !defined(NOCRYPT)
 753 _secure_lib=    secure/lib
 754 .endif
 755
 756 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
 757 _kerberosIV_lib=        kerberosIV/lib
 758 .endif
 759
 760 .if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
 761 _kerberos5_lib= kerberos5/lib
 762 .endif
 763
 764 .if defined(WANT_CSRG_LIBM)
 765 _libm=  lib/libm
 766 .else
 767 _libm=  lib/msun
 768 .endif
 769
 770 .if ${MACHINE_ARCH} == "i386"
 771 _libkeycap=     usr.sbin/pcvt/keycap
 772 .endif
 773
 774 .if !defined(NOPERL)
 775 _libperl=       gnu/usr.bin/perl/libperl
 776 .endif
 777
 778 libraries:
 779 .for _lib in ${_csu} gnu/lib/csu gnu/lib/libgcc lib/libmd lib/libcrypt \
 780     ${_secure_lib} ${_kerberosIV_lib} \
 781     ${_kerberos5_lib} lib/libcom_err lib/libkvm ${_libm} lib/libncurses \
 782     lib/libopie lib/libradius lib/librpcsvc lib/libsbuf lib/libtacplus \
 783     lib/libutil lib/libz lib gnu/lib ${_libperl} usr.bin/lex/lib ${_libkeycap}
 784 .if exists(${.CURDIR}/${_lib})
 785         cd ${.CURDIR}/${_lib}; \
 786                 ${MAKE} depend; \
 787                 ${MAKE} all; \
 788                 ${MAKE} install
 789 .endif
 790 .endfor
 791
 792 .for __target in clean cleandepend cleandir depend obj
 793 .for entry in ${SUBDIR}
 794 ${entry}.${__target}__D: .PHONY
 795         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 796                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 797                 edir=${entry}.${MACHINE_ARCH}; \
 798                 cd ${.CURDIR}/$${edir}; \
 799         else \
 800                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 801                 edir=${entry}; \
 802                 cd ${.CURDIR}/$${edir}; \
 803         fi; \
 804         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 805 .endfor
 806 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 807 .endfor
 808
 809 .include <bsd.subdir.mk>