2 * SPDX-License-Identifier: BSD-3-Clause
4 * Copyright (c) 1992 Keith Muller.
5 * Copyright (c) 1992, 1993
6 * The Regents of the University of California. All rights reserved.
8 * This code is derived from software contributed to Berkeley by
9 * Keith Muller of the University of California, San Diego.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. Neither the name of the University nor the names of its contributors
20 * may be used to endorse or promote products derived from this software
21 * without specific prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38 static char sccsid[] = "@(#)ar_io.c 8.2 (Berkeley) 4/18/94";
41 #include <sys/cdefs.h>
42 __FBSDID("$FreeBSD$");
44 #include <sys/types.h>
45 #include <sys/ioctl.h>
63 * Routines which deal directly with the archive I/O device/file.
66 #define DMOD 0666 /* default mode of created archives */
67 #define EXT_MODE O_RDONLY /* open mode for list/extract */
68 #define AR_MODE (O_WRONLY | O_CREAT | O_TRUNC) /* mode for archive */
69 #define APP_MODE O_RDWR /* mode for append */
71 static char none[] = "<NONE>"; /* pseudo name for no file */
72 static char stdo[] = "<STDOUT>"; /* pseudo name for stdout */
73 static char stdn[] = "<STDIN>"; /* pseudo name for stdin */
74 static int arfd = -1; /* archive file descriptor */
75 static int artyp = ISREG; /* archive type: file/FIFO/tape */
76 static int arvol = 1; /* archive volume number */
77 static int lstrval = -1; /* return value from last i/o */
78 static int io_ok; /* i/o worked on volume after resync */
79 static int did_io; /* did i/o ever occur on volume? */
80 static int done; /* set via tty termination */
81 static struct stat arsb; /* stat of archive device at open */
82 static int invld_rec; /* tape has out of spec record size */
83 static int wr_trail = 1; /* trailer was rewritten in append */
84 static int can_unlnk = 0; /* do we unlink null archives? */
85 const char *arcname; /* printable name of archive */
86 const char *gzip_program; /* name of gzip program */
87 static pid_t zpid = -1; /* pid of child process */
89 static int get_phys(void);
90 static void ar_start_gzip(int, const char *, int);
94 * Opens the next archive volume. Determines the type of the device and
95 * sets up block sizes as required by the archive device and the format.
96 * Note: we may be called with name == NULL on the first open only.
98 * -1 on failure, 0 otherwise
102 ar_open(const char *name)
109 can_unlnk = did_io = io_ok = invld_rec = 0;
114 * open based on overall operation mode
122 } else if ((arfd = open(name, EXT_MODE, DMOD)) < 0)
123 syswarn(0, errno, "Failed open to read on %s", name);
124 if (arfd != -1 && gzip_program != NULL)
125 ar_start_gzip(arfd, gzip_program, 0);
129 arfd = STDOUT_FILENO;
131 } else if ((arfd = open(name, AR_MODE, DMOD)) < 0)
132 syswarn(0, errno, "Failed open to write on %s", name);
135 if (arfd != -1 && gzip_program != NULL)
136 ar_start_gzip(arfd, gzip_program, 1);
140 arfd = STDOUT_FILENO;
142 } else if ((arfd = open(name, APP_MODE, DMOD)) < 0)
143 syswarn(0, errno, "Failed open to read/write on %s",
148 * arfd not used in COPY mode
158 if (chdir(chdname) != 0) {
159 syswarn(1, errno, "Failed chdir to %s", chdname);
163 * set up is based on device type
165 if (fstat(arfd, &arsb) < 0) {
166 syswarn(0, errno, "Failed stat on %s", arcname);
172 if (S_ISDIR(arsb.st_mode)) {
173 paxwarn(0, "Cannot write an archive on top of a directory %s",
181 if (S_ISCHR(arsb.st_mode))
182 artyp = ioctl(arfd, MTIOCGET, &mb) ? ISCHR : ISTAPE;
183 else if (S_ISBLK(arsb.st_mode))
185 else if ((lseek(arfd, (off_t)0L, SEEK_CUR) == -1) && (errno == ESPIPE))
191 * make sure we beyond any doubt that we only can unlink regular files
197 * if we are writing, we are done
199 if (act == ARCHIVE) {
200 blksz = rdblksz = wrblksz;
206 * set default blksz on read. APPNDs writes rdblksz on the last volume
207 * On all new archive volumes, we shift to wrblksz (if the user
208 * specified one, otherwise we will continue to use rdblksz). We
209 * must to set blocksize based on what kind of device the archive is
215 * Tape drives come in at least two flavors. Those that support
216 * variable sized records and those that have fixed sized
217 * records. They must be treated differently. For tape drives
218 * that support variable sized records, we must make large
219 * reads to make sure we get the entire record, otherwise we
220 * will just get the first part of the record (up to size we
221 * asked). Tapes with fixed sized records may or may not return
222 * multiple records in a single read. We really do not care
223 * what the physical record size is UNLESS we are going to
224 * append. (We will need the physical block size to rewrite
225 * the trailer). Only when we are appending do we go to the
226 * effort to figure out the true PHYSICAL record size.
228 blksz = rdblksz = MAXBLK;
234 * Blocksize is not a major issue with these devices (but must
235 * be kept a multiple of 512). If the user specified a write
236 * block size, we use that to read. Under append, we must
237 * always keep blksz == rdblksz. Otherwise we go ahead and use
238 * the device optimal blocksize as (and if) returned by stat
239 * and if it is within pax specs.
241 if ((act == APPND) && wrblksz) {
242 blksz = rdblksz = wrblksz;
246 if ((arsb.st_blksize > 0) && (arsb.st_blksize < MAXBLK) &&
247 ((arsb.st_blksize % BLKMULT) == 0))
248 rdblksz = arsb.st_blksize;
252 * For performance go for large reads when we can without harm
254 if ((act == APPND) || (artyp == ISCHR))
261 * if the user specified wrblksz works, use it. Under appends
262 * we must always keep blksz == rdblksz
264 if ((act == APPND) && wrblksz && ((arsb.st_size%wrblksz)==0)){
265 blksz = rdblksz = wrblksz;
269 * See if we can find the blocking factor from the file size
271 for (rdblksz = MAXBLK; rdblksz > 0; rdblksz -= BLKMULT)
272 if ((arsb.st_size % rdblksz) == 0)
275 * When we cannot find a match, we may have a flawed archive.
280 * for performance go for large reads when we can
289 * should never happen, worse case, slow...
291 blksz = rdblksz = BLKMULT;
300 * closes archive device, increments volume number, and prints i/o summary
308 did_io = io_ok = flcnt = 0;
313 * Close archive file. This may take a LONG while on tapes (we may be
314 * forced to wait for the rewind to complete) so tell the user what is
315 * going on (this avoids the user hitting control-c thinking pax is
318 if (vflag && (artyp == ISTAPE)) {
320 (void)putc('\n', listf);
322 "%s: Waiting for tape drive close to complete...",
328 * if nothing was written to the archive (and we created it), we remove
331 if (can_unlnk && (fstat(arfd, &arsb) == 0) && (S_ISREG(arsb.st_mode)) &&
332 (arsb.st_size == 0)) {
333 (void)unlink(arcname);
338 * for a quick extract/list, pax frequently exits before the child
341 if ((act == LIST || act == EXTRACT) && nflag && zpid > 0)
346 /* Do not exit before child to ensure data integrity */
348 waitpid(zpid, &status, 0);
350 if (vflag && (artyp == ISTAPE)) {
351 (void)fputs("done.\n", listf);
357 if (!io_ok && !did_io) {
364 * The volume number is only increased when the last device has data
365 * and we have already determined the archive format.
376 * Print out a summary of I/O for this archive volume.
379 (void)putc('\n', listf);
384 * If we have not determined the format yet, we just say how many bytes
385 * we have skipped over looking for a header to id. There is no way we
386 * could have written anything yet.
390 (void)fprintf(listf, "%s: unknown format, %lu bytes skipped.\n",
393 (void)fprintf(listf, "%s: unknown format, %ju bytes skipped.\n",
394 argv0, (uintmax_t)rdcnt);
401 if (strcmp(NM_CPIO, argv0) == 0)
402 (void)fprintf(listf, "%llu blocks\n",
403 (unsigned long long)((rdcnt ? rdcnt : wrcnt) / 5120));
404 else if (strcmp(NM_TAR, argv0) != 0)
407 "%s: %s vol %d, %lu files, %lu bytes read, %lu bytes written.\n",
408 argv0, frmt->name, arvol-1, flcnt, rdcnt, wrcnt);
410 "%s: %s vol %d, %ju files, %ju bytes read, %ju bytes written.\n",
411 argv0, frmt->name, arvol-1, (uintmax_t)flcnt,
412 (uintmax_t)rdcnt, (uintmax_t)wrcnt);
420 * drain any archive format independent padding from an archive read
421 * from a socket or a pipe. This is to prevent the process on the
422 * other side of the pipe from getting a SIGPIPE (pax will stop
423 * reading an archive once a format dependent trailer is detected).
432 * we only drain from a pipe/socket. Other devices can be closed
433 * without reading up to end of file. We sure hope that pipe is closed
434 * on the other side so we will get an EOF.
436 if ((artyp != ISPIPE) || (lstrval <= 0))
440 * keep reading until pipe is drained
442 while ((res = read(arfd, drbuf, sizeof(drbuf))) > 0)
449 * Set up device right before switching from read to write in an append.
450 * device dependent code (if required) to do this should be added here.
451 * For all archive devices we are already positioned at the place we want
452 * to start writing when this routine is called.
454 * 0 if all ready to write, -1 otherwise
463 * we must make sure the trailer is rewritten on append, ar_next()
464 * will stop us if the archive containing the trailer was not written
469 * Add any device dependent code as required here
474 * Ok we have an archive in a regular file. If we were rewriting a
475 * file, we must get rid of all the stuff after the current offset
476 * (it was not written by pax).
478 if (((cpos = lseek(arfd, (off_t)0L, SEEK_CUR)) < 0) ||
479 (ftruncate(arfd, cpos) < 0)) {
480 syswarn(1, errno, "Unable to truncate archive file");
488 * check if the last volume in the archive allows appends. We cannot check
489 * this until we are ready to write since there is no spec that says all
490 * volumes in a single archive have to be of the same type...
492 * 0 if we can append, -1 otherwise.
498 if (artyp == ISPIPE) {
499 paxwarn(1, "Cannot append to an archive obtained from a pipe.");
505 paxwarn(1,"Cannot append, device record size %d does not support %s spec",
512 * read up to a specified number of bytes from the archive into the
513 * supplied buffer. When dealing with tapes we may not always be able to
516 * Number of bytes in buffer. 0 for end of file, -1 for a read error.
520 ar_read(char *buf, int cnt)
525 * if last i/o was in error, no more reads until reset or new volume
531 * how we read must be based on device type
535 if ((res = read(arfd, buf, cnt)) > 0) {
537 * CAUTION: tape systems may not always return the same
538 * sized records so we leave blksz == MAXBLK. The
539 * physical record size that a tape drive supports is
540 * very hard to determine in a uniform and portable
544 if (res != rdblksz) {
546 * Record size changed. If this is happens on
547 * any record after the first, we probably have
548 * a tape drive which has a fixed record size
549 * we are getting multiple records in a single
550 * read). Watch out for record blocking that
551 * violates pax spec (must be a multiple of
555 if (rdblksz % BLKMULT)
567 * Files are so easy to deal with. These other things cannot
568 * be trusted at all. So when we are dealing with character
569 * devices and pipes we just take what they have ready for us
570 * and return. Trying to do anything else with them runs the
573 if ((res = read(arfd, buf, cnt)) > 0) {
581 * We are in trouble at this point, something is broken...
585 syswarn(1, errno, "Failed read on archive volume %d", arvol);
587 paxwarn(0, "End of archive volume %d reached", arvol);
593 * Write a specified number of bytes in supplied buffer to the archive
594 * device so it appears as a single "block". Deals with errors and tries
595 * to recover when faced with short writes.
597 * Number of bytes written. 0 indicates end of volume reached and with no
598 * flaws (as best that can be detected). A -1 indicates an unrecoverable
599 * error in the archive occurred.
603 ar_write(char *buf, int bsz)
609 * do not allow pax to create a "bad" archive. Once a write fails on
610 * an archive volume prevent further writes to it.
615 if ((res = write(arfd, buf, bsz)) == bsz) {
621 * write broke, see what we can do with it. We try to send any partial
622 * writes that may violate pax spec to the next archive volume.
631 if ((res > 0) && (res % BLKMULT)) {
633 * try to fix up partial writes which are not BLKMULT
634 * in size by forcing the runt record to next archive
637 if ((cpos = lseek(arfd, (off_t)0L, SEEK_CUR)) < 0)
640 if (ftruncate(arfd, cpos) < 0)
648 * if file is out of space, handle it like a return of 0
650 if ((errno == ENOSPC) || (errno == EFBIG) || (errno == EDQUOT))
658 if (errno == EACCES) {
659 paxwarn(0, "Write failed, archive is write protected.");
664 * see if we reached the end of media, if so force a change to
667 if ((errno == ENOSPC) || (errno == EIO) || (errno == ENXIO))
673 * we cannot fix errors to these devices
679 * Better tell the user the bad news...
680 * if this is a block aligned archive format, we may have a bad archive
681 * if the format wants the header to start at a BLKMULT boundary. While
682 * we can deal with the mis-aligned data, it violates spec and other
683 * archive readers will likely fail. If the format is not block
684 * aligned, the user may be lucky (and the archive is ok).
693 * If we were trying to rewrite the trailer and it didn't work, we
694 * must quit right away.
696 if (!wr_trail && (res <= 0)) {
697 paxwarn(1,"Unable to append, trailer re-write failed. Quitting.");
702 paxwarn(0, "End of archive volume %d reached", arvol);
704 syswarn(1, errno, "Failed write to archive volume: %d", arvol);
705 else if (!frmt->blkalgn || ((res % frmt->blkalgn) == 0))
706 paxwarn(0,"WARNING: partial archive write. Archive MAY BE FLAWED");
708 paxwarn(1,"WARNING: partial archive write. Archive IS FLAWED");
714 * Try to move past a bad spot on a flawed archive as needed to continue
715 * I/O. Clears error flags to allow I/O to continue.
717 * 0 when ok to try i/o again, -1 otherwise.
729 * Fail resync attempts at user request (done) or this is going to be
730 * an update/append to an existing archive. If last i/o hit media end,
731 * we need to go to the next volume not try a resync.
733 if ((done > 0) || (lstrval == 0))
736 if ((act == APPND) || (act == ARCHIVE)) {
737 paxwarn(1, "Cannot allow updates to an archive with flaws.");
746 * if the last i/o was a successful data transfer, we assume
747 * the fault is just a bad record on the tape that we are now
748 * past. If we did not get any data since the last resync try
749 * to move the tape forward one PHYSICAL record past any
750 * damaged tape section. Some tape drives are stubborn and need
760 if (ioctl(arfd, MTIOCTOP, &mb) < 0)
768 * try to step over the bad part of the device.
771 if (((fsbz = arsb.st_blksize) <= 0) || (artyp != ISREG))
773 if ((cpos = lseek(arfd, (off_t)0L, SEEK_CUR)) < 0)
775 mpos = fsbz - (cpos % (off_t)fsbz);
776 if (lseek(arfd, mpos, SEEK_CUR) < 0)
783 * cannot recover on these archive device types
789 paxwarn(1, "Unable to recover from an archive read failure.");
792 paxwarn(0, "Attempting to recover from an archive read failure.");
798 * Move the I/O position within the archive forward the specified number of
799 * bytes as supported by the device. If we cannot move the requested
800 * number of bytes, return the actual number of bytes moved in skipped.
802 * 0 if moved the requested distance, -1 on complete failure, 1 on
803 * partial move (the amount moved is in skipped)
807 ar_fow(off_t sksz, off_t *skipped)
817 * we cannot move forward at EOF or error
823 * Safer to read forward on devices where it is hard to find the end of
824 * the media without reading to it. With tapes we cannot be sure of the
825 * number of physical blocks to skip (we do not know physical block
826 * size at this point), so we must only read forward on tapes!
832 * figure out where we are in the archive
834 if ((cpos = lseek(arfd, (off_t)0L, SEEK_CUR)) >= 0) {
836 * we can be asked to move farther than there are bytes in this
837 * volume, if so, just go to file end and let normal buf_fill()
838 * deal with the end of file (it will go to next volume by
841 if ((mpos = cpos + sksz) > arsb.st_size) {
842 *skipped = arsb.st_size - cpos;
846 if (lseek(arfd, mpos, SEEK_SET) >= 0)
849 syswarn(1, errno, "Forward positioning operation on archive failed");
856 * move the i/o position within the archive backwards the specified byte
857 * count as supported by the device. With tapes drives we RESET rdblksz to
858 * the PHYSICAL blocksize.
859 * NOTE: We should only be called to move backwards so we can rewrite the
860 * last records (the trailer) of an archive (APPEND).
862 * 0 if moved the requested distance, -1 on complete failure
873 * make sure we do not have try to reverse on a flawed archive
883 * cannot go backwards on these critters
885 paxwarn(1, "Reverse positioning on pipes is not supported.");
896 * For things other than files, backwards movement has a very
897 * high probability of failure as we really do not know the
898 * true attributes of the device we are talking to (the device
899 * may not even have the ability to lseek() in any direction).
900 * First we figure out where we are in the archive.
902 if ((cpos = lseek(arfd, (off_t)0L, SEEK_CUR)) < 0) {
904 "Unable to obtain current archive byte offset");
910 * we may try to go backwards past the start when the archive
911 * is only a single record. If this happens and we are on a
912 * multi volume archive, we need to go to the end of the
913 * previous volume and continue our movement backwards from
916 if ((cpos -= sksz) < (off_t)0L) {
919 * this should never happen
921 paxwarn(1,"Reverse position on previous volume.");
927 if (lseek(arfd, cpos, SEEK_SET) < 0) {
928 syswarn(1, errno, "Unable to seek archive backwards");
935 * Calculate and move the proper number of PHYSICAL tape
936 * blocks. If the sksz is not an even multiple of the physical
937 * tape size, we cannot do the move (this should never happen).
938 * (We also cannot handler trailers spread over two vols).
939 * get_phys() also makes sure we are in front of the filemark.
941 if ((phyblk = get_phys()) <= 0) {
947 * make sure future tape reads only go by physical tape block
948 * size (set rdblksz to the real size).
953 * if no movement is required, just return (we must be after
954 * get_phys() so the physical blocksize is properly set)
960 * ok we have to move. Make sure the tape drive can do it.
964 "Tape drive unable to backspace requested amount");
970 * move backwards the requested number of bytes
973 mb.mt_count = sksz/phyblk;
974 if (ioctl(arfd, MTIOCTOP, &mb) < 0) {
975 syswarn(1,errno, "Unable to backspace tape %d blocks.",
988 * Determine the physical block size on a tape drive. We need the physical
989 * block size so we know how many bytes we skip over when we move with
990 * mtio commands. We also make sure we are BEFORE THE TAPE FILEMARK when
992 * This is one really SLOW routine...
994 * physical block size if ok (ok > 0), -1 otherwise
1007 * move to the file mark, and then back up one record and read it.
1008 * this should tell us the physical record size the tape is using.
1012 * we know we are at file mark when we get back a 0 from
1015 while ((res = read(arfd, scbuf, sizeof(scbuf))) > 0)
1018 syswarn(1, errno, "Unable to locate tape filemark.");
1024 * move backwards over the file mark so we are at the end of the
1029 if (ioctl(arfd, MTIOCTOP, &mb) < 0) {
1030 syswarn(1, errno, "Unable to backspace over tape filemark.");
1035 * move backwards so we are in front of the last record and read it to
1036 * get physical tape blocksize.
1040 if (ioctl(arfd, MTIOCTOP, &mb) < 0) {
1041 syswarn(1, errno, "Unable to backspace over last tape block.");
1044 if ((phyblk = read(arfd, scbuf, sizeof(scbuf))) <= 0) {
1045 syswarn(1, errno, "Cannot determine archive tape blocksize.");
1050 * read forward to the file mark, then back up in front of the filemark
1051 * (this is a bit paranoid, but should be safe to do).
1053 while ((res = read(arfd, scbuf, sizeof(scbuf))) > 0)
1056 syswarn(1, errno, "Unable to locate tape filemark.");
1061 if (ioctl(arfd, MTIOCTOP, &mb) < 0) {
1062 syswarn(1, errno, "Unable to backspace over tape filemark.");
1067 * set lstrval so we know that the filemark has not been seen
1072 * return if there was no padding
1078 * make sure we can move backwards over the padding. (this should
1081 if (padsz % phyblk) {
1082 paxwarn(1, "Tape drive unable to backspace requested amount");
1087 * move backwards over the padding so the head is where it was when
1088 * we were first called (if required).
1091 mb.mt_count = padsz/phyblk;
1092 if (ioctl(arfd, MTIOCTOP, &mb) < 0) {
1093 syswarn(1,errno,"Unable to backspace tape over %d pad blocks",
1102 * prompts the user for the next volume in this archive. For some devices
1103 * we may allow the media to be changed. Otherwise a new archive is
1104 * prompted for. By pax spec, if there is no controlling tty or an eof is
1105 * read on tty input, we must quit pax.
1107 * 0 when ready to continue, -1 when all done
1113 static char *arcbuf;
1114 char buf[PAXPATHLEN+2];
1118 * WE MUST CLOSE THE DEVICE. A lot of devices must see last close, (so
1119 * things like writing EOF etc will be done) (Watch out ar_close() can
1120 * also be called via a signal handler, so we must prevent a race.
1122 if (sigprocmask(SIG_BLOCK, &s_mask, &o_mask) < 0)
1123 syswarn(0, errno, "Unable to set signal mask");
1125 if (sigprocmask(SIG_SETMASK, &o_mask, NULL) < 0)
1126 syswarn(0, errno, "Unable to restore signal mask");
1128 if (done || !wr_trail || Oflag || strcmp(NM_TAR, argv0) == 0)
1131 tty_prnt("\nATTENTION! %s archive volume change required.\n", argv0);
1134 * if i/o is on stdin or stdout, we cannot reopen it (we do not know
1135 * the name), the user will be forced to type it in.
1137 if (strcmp(arcname, stdo) && strcmp(arcname, stdn) && (artyp != ISREG)
1138 && (artyp != ISPIPE)) {
1139 if (artyp == ISTAPE) {
1140 tty_prnt("%s ready for archive tape volume: %d\n",
1142 tty_prnt("Load the NEXT TAPE on the tape drive");
1144 tty_prnt("%s ready for archive volume: %d\n",
1146 tty_prnt("Load the NEXT STORAGE MEDIA (if required)");
1149 if ((act == ARCHIVE) || (act == APPND))
1150 tty_prnt(" and make sure it is WRITE ENABLED.\n");
1155 tty_prnt("Type \"y\" to continue, \".\" to quit %s,",
1157 tty_prnt(" or \"s\" to switch to new device.\nIf you");
1158 tty_prnt(" cannot change storage media, type \"s\"\n");
1159 tty_prnt("Is the device ready and online? > ");
1161 if ((tty_read(buf,sizeof(buf))<0) || !strcmp(buf,".")){
1164 tty_prnt("Quitting %s!\n", argv0);
1169 if ((buf[0] == '\0') || (buf[1] != '\0')) {
1170 tty_prnt("%s unknown command, try again\n",buf);
1178 * we are to continue with the same device
1180 if (ar_open(arcname) >= 0)
1182 tty_prnt("Cannot re-open %s, try again\n",
1188 * user wants to open a different device
1190 tty_prnt("Switching to a different archive\n");
1193 tty_prnt("%s unknown command, try again\n",buf);
1199 tty_prnt("Ready for archive volume: %d\n", arvol);
1202 * have to go to a different archive
1205 tty_prnt("Input archive name or \".\" to quit %s.\n", argv0);
1206 tty_prnt("Archive name > ");
1208 if ((tty_read(buf, sizeof(buf)) < 0) || !strcmp(buf, ".")) {
1211 tty_prnt("Quitting %s!\n", argv0);
1215 if (buf[0] == '\0') {
1216 tty_prnt("Empty file name, try again\n");
1219 if (!strcmp(buf, "..")) {
1220 tty_prnt("Illegal file name: .. try again\n");
1223 if (strlen(buf) > PAXPATHLEN) {
1224 tty_prnt("File name too long, try again\n");
1229 * try to open new archive
1231 if (ar_open(buf) >= 0) {
1233 if ((arcbuf = strdup(buf)) == NULL) {
1236 paxwarn(0, "Cannot save archive name.");
1242 tty_prnt("Cannot open %s, try again\n", buf);
1250 * starts the gzip compression/decompression process as a child, using magic
1251 * to keep the fd the same in the calling function (parent).
1254 ar_start_gzip(int fd, const char *gzip_prog, int wr)
1257 const char *gzip_flags;
1260 err(1, "could not pipe");
1263 err(1, "could not fork");
1275 dup2(fds[0], STDIN_FILENO);
1276 dup2(fd, STDOUT_FILENO);
1279 dup2(fds[1], STDOUT_FILENO);
1280 dup2(fd, STDIN_FILENO);
1285 if (execlp(gzip_prog, gzip_prog, gzip_flags,
1287 err(1, "could not exec");