2 * SPDX-License-Identifier: BSD-3-Clause
4 * Copyright (c) 1992 Keith Muller.
5 * Copyright (c) 1992, 1993
6 * The Regents of the University of California. All rights reserved.
8 * This code is derived from software contributed to Berkeley by
9 * Keith Muller of the University of California, San Diego.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. Neither the name of the University nor the names of its contributors
20 * may be used to endorse or promote products derived from this software
21 * without specific prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38 static char sccsid[] = "@(#)ftree.c 8.2 (Berkeley) 4/18/94";
41 #include <sys/cdefs.h>
42 __FBSDID("$FreeBSD$");
44 #include <sys/types.h>
58 * routines to interface with the fts library function.
60 * file args supplied to pax are stored on a single linked list (of type FTREE)
61 * and given to fts to be processed one at a time. pax "selects" files from
62 * the expansion of each arg into the corresponding file tree (if the arg is a
63 * directory, otherwise the node itself is just passed to pax). The selection
64 * is modified by the -n and -u flags. The user is informed when a specific
65 * file arg does not generate any selected files. -n keeps expanding the file
66 * tree arg until one of its files is selected, then skips to the next file
67 * arg. when the user does not supply the file trees as command line args to
68 * pax, they are read from stdin
71 static FTS *ftsp = NULL; /* current FTS handle */
72 static int ftsopts; /* options to be used on fts_open */
73 static char *farray[2]; /* array for passing each arg to fts */
74 static FTREE *fthead = NULL; /* head of linked list of file args */
75 static FTREE *fttail = NULL; /* tail of linked list of file args */
76 static FTREE *ftcur = NULL; /* current file arg being processed */
77 static FTSENT *ftent = NULL; /* current file tree entry */
78 static int ftree_skip; /* when set skip to next file arg */
80 static int ftree_arg(void);
84 * initialize the options passed to fts_open() during this run of pax
85 * options are based on the selection of pax options by the user
86 * fts_start() also calls fts_arg() to open the first valid file arg. We
87 * also attempt to reset directory access times when -t (tflag) is set.
89 * 0 if there is at least one valid file arg to process, -1 otherwise
96 * Set up the operation mode of fts, open the first file arg. We must
97 * use FTS_NOCHDIR, as the user may have to open multiple archives and
98 * if fts did a chdir off into the boondocks, we may create an archive
99 * volume in a place where the user did not expect to.
101 ftsopts = FTS_NOCHDIR;
104 * optional user flags that effect file traversal
105 * -H command line symlink follow only (half follow)
106 * -L follow symlinks (logical)
107 * -P do not follow symlinks (physical). This is the default.
108 * -X do not cross over mount points
109 * -t preserve access times on files read.
110 * -n select only the first member of a file tree when a match is found
111 * -d do not extract subtrees rooted at a directory arg.
114 ftsopts |= FTS_LOGICAL;
116 ftsopts |= FTS_PHYSICAL;
119 paxwarn(0, "The -H flag is not supported on this version");
121 ftsopts |= FTS_COMFOLLOW;
126 if ((fthead == NULL) && ((farray[0] = malloc(PAXPATHLEN+2)) == NULL)) {
127 paxwarn(1, "Unable to allocate memory for file name buffer");
133 if (tflag && (atdir_start() < 0))
140 * add the arg to the linked list of files to process. Each will be
141 * processed by fts one at a time
143 * 0 if added to the linked list, -1 if failed
147 ftree_add(char *str, int chflg)
153 * simple check for bad args
155 if ((str == NULL) || (*str == '\0')) {
156 paxwarn(0, "Invalid file name argument");
161 * allocate FTREE node and add to the end of the linked list (args are
162 * processed in the same order they were passed to pax). Get rid of any
163 * trailing / the user may pass us. (watch out for / by itself).
165 if ((ft = (FTREE *)malloc(sizeof(FTREE))) == NULL) {
166 paxwarn(0, "Unable to allocate memory for filename");
170 if (((len = strlen(str) - 1) > 0) && (str[len] == '/'))
176 if (fthead == NULL) {
177 fttail = fthead = ft;
187 * this entry has been selected by pax. bump up reference count and handle
188 * -n and -d processing.
192 ftree_sel(ARCHD *arcn)
195 * set reference bit for this pattern. This linked list is only used
196 * when file trees are supplied pax as args. The list is not used when
197 * the trees are read from stdin.
203 * if -n we are done with this arg, force a skip to the next arg when
204 * pax asks for the next file in next_file().
205 * if -d we tell fts only to match the directory (if the arg is a dir)
206 * and not the entire file tree rooted at that point.
211 if (!dflag || (arcn->type != PAX_DIR))
215 (void)fts_set(ftsp, ftent, FTS_SKIP);
220 * this entry has not been selected by pax.
227 (void)fts_set(ftsp, ftent, FTS_SKIP);
232 * called at end on pax execution. Prints all those file args that did not
233 * have a selected member (reference count still 0)
243 * make sure all dir access times were reset.
249 * walk down list and check reference count. Print out those members
250 * that never had a match
252 for (ft = fthead; ft != NULL; ft = ft->fow) {
253 if ((ft->refcnt > 0) || ft->chflg)
256 paxwarn(1,"WARNING! These file names were not selected:");
259 (void)fprintf(stderr, "%s\n", ft->fname);
265 * Get the next file arg for fts to process. Can be from either the linked
266 * list or read from stdin when the user did not them as args to pax. Each
267 * arg is processed until the first successful fts_open().
269 * 0 when the next arg is ready to go, -1 if out of file args (or EOF on
279 * close off the current file tree
282 (void)fts_close(ftsp);
287 * keep looping until we get a valid file tree to process. Stop when we
288 * reach the end of the list (or get an eof on stdin)
291 if (fthead == NULL) {
293 * the user didn't supply any args, get the file trees
294 * to process from stdin;
296 if (fgets(farray[0], PAXPATHLEN+1, stdin) == NULL)
298 if ((pt = strchr(farray[0], '\n')) != NULL)
302 * the user supplied the file args as arguments to pax
306 else if ((ftcur = ftcur->fow) == NULL)
309 /* First fchdir() back... */
310 if (fchdir(cwdfd) < 0) {
312 "Can't fchdir to starting directory");
315 if (chdir(ftcur->fname) < 0) {
316 syswarn(1, errno, "Can't chdir to %s",
322 farray[0] = ftcur->fname;
326 * Watch it, fts wants the file arg stored in an array of char
327 * ptrs, with the last one a null. We use a two element array
328 * and set farray[0] to point at the buffer with the file name
329 * in it. We cannot pass all the file args to fts at one shot
330 * as we need to keep a handle on which file arg generates what
331 * files (the -n and -d flags need this). If the open is
332 * successful, return a 0.
334 if ((ftsp = fts_open(farray, ftsopts, NULL)) != NULL)
342 * supplies the next file to process in the supplied archd structure.
344 * 0 when contents of arcn have been set with the next file, -1 when done.
348 next_file(ARCHD *arcn)
355 * ftree_sel() might have set the ftree_skip flag if the user has the
356 * -n option and a file was selected from this file arg tree. (-n says
357 * only one member is matched for each pattern) ftree_skip being 1
358 * forces us to go to the next arg now.
362 * clear and go to next arg
370 * loop until we get a valid file to process
373 if ((ftent = fts_read(ftsp)) == NULL) {
375 * out of files in this tree, go to next arg, if none
384 * handle each type of fts_read() flag
386 switch(ftent->fts_info) {
398 * already saw this directory. If the user wants file
399 * access times reset, we use this to restore the
400 * access time for this directory since this is the
401 * last time we will see it in this file subtree
402 * remember to force the time (this is -t on a read
403 * directory, not a created directory).
406 if (!tflag || (get_atdir(ftent->fts_statb.st_dev,
407 ftent->fts_statb.st_ino, &mtime, &atime) < 0))
409 if (!tflag || (get_atdir(ftent->fts_statp->st_dev,
410 ftent->fts_statp->st_ino, &mtime, &atime) < 0))
413 set_ftime(ftent->fts_path, mtime, atime, 1);
417 * fts claims a file system cycle
419 paxwarn(1,"File system cycle found at %s",ftent->fts_path);
425 syswarn(1, ftent->fts_errno,
427 "Unable to read directory %s", ftent->fts_path);
433 syswarn(1, ftent->fts_errno,
435 "File system traversal error");
442 syswarn(1, ftent->fts_errno,
444 "Unable to access %s", ftent->fts_path);
449 * ok got a file tree node to process. copy info into arcn
450 * structure (initialize as required)
455 arcn->ln_name[0] = '\0';
457 arcn->sb = ftent->fts_statb;
459 arcn->sb = *(ftent->fts_statp);
463 * file type based set up and copy into the arcn struct
465 * we try to reset the access time on all files and directories
466 * we may read when the -t flag is specified. files are reset
467 * when we close them after copying. we reset the directories
468 * when we are done with their file tree (we also clean up at
469 * end in case we cut short a file tree traversal). However
470 * there is no way to reset access times on symlinks.
472 switch(S_IFMT & arcn->sb.st_mode) {
474 arcn->type = PAX_DIR;
477 add_atdir(ftent->fts_path, arcn->sb.st_dev,
478 arcn->sb.st_ino, arcn->sb.st_mtime,
482 arcn->type = PAX_CHR;
485 arcn->type = PAX_BLK;
489 * only regular files with have data to store on the
490 * archive. all others will store a zero length skip.
491 * the skip field is used by pax for actual data it has
492 * to read (or skip over).
494 arcn->type = PAX_REG;
495 arcn->skip = arcn->sb.st_size;
498 arcn->type = PAX_SLK;
500 * have to read the symlink path from the file
502 if ((cnt = readlink(ftent->fts_path, arcn->ln_name,
503 PAXPATHLEN - 1)) < 0) {
504 syswarn(1, errno, "Unable to read symlink %s",
509 * set link name length, watch out readlink does not
510 * always NUL terminate the link path
512 arcn->ln_name[cnt] = '\0';
517 * under BSD storing a socket is senseless but we will
518 * let the format specific write function make the
519 * decision of what to do with it.
521 arcn->type = PAX_SCK;
524 arcn->type = PAX_FIF;
531 * copy file name, set file name length
533 arcn->nlen = l_strncpy(arcn->name, ftent->fts_path, sizeof(arcn->name) - 1);
534 arcn->name[arcn->nlen] = '\0';
535 arcn->org_name = ftent->fts_path;