2 .\" Copyright (c) 2012, Martin Matuska <mm@FreeBSD.org>.
3 .\" All Rights Reserved.
5 .\" The contents of this file are subject to the terms of the
6 .\" Common Development and Distribution License (the "License").
7 .\" You may not use this file except in compliance with the License.
9 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10 .\" or http://www.opensolaris.org/os/licensing.
11 .\" See the License for the specific language governing permissions
12 .\" and limitations under the License.
14 .\" When distributing Covered Code, include this CDDL HEADER in each
15 .\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16 .\" If applicable, add the following below this CDDL HEADER, with the
17 .\" fields enclosed by brackets "[]" replaced with your own identifying
18 .\" information: Portions Copyright [yyyy] [name of copyright owner]
20 .\" Copyright (c) 2012 by Delphix. All rights reserved.
21 .\" Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
22 .\" Copyright (c) 2013, Joyent, Inc. All rights reserved.
31 .Nd ZFS pool feature descriptions
33 ZFS pool on\-disk format versions are specified via "features" which replace
34 the old on\-disk format numbers (the last supported on\-disk format number is
36 To enable a feature on a pool use the
41 .Sy feature@feature_name
45 The pool format does not affect file system version compatibility or the ability
46 to send file systems between pools.
48 Since most features can be enabled independently of each other the on\-disk
49 format of the pool is specified by the set of all features marked as
51 on the pool. If the pool was created by another software version this set may
52 include unsupported features.
53 .Ss Identifying features
54 Every feature has a guid of the form
55 .Sy com.example:feature_name .
56 The reverse DNS name ensures that the feature's guid is unique across all ZFS
57 implementations. When unsupported features are encountered on a pool they will
58 be identified by their guids.
59 Refer to the documentation for the ZFS implementation that created the pool
60 for information about those features.
62 Each supported feature also has a short name.
63 By convention a feature's short name is the portion of its guid which follows
65 .Sy com.example:feature_name
66 would have the short name
68 however a feature's short name may differ across ZFS implementations if
69 following the convention would result in name conflicts.
71 Features can be in one of three states:
72 .Bl -tag -width "XXXXXXXX"
74 This feature's on\-disk format changes are in effect on the pool.
75 Support for this feature is required to import the pool in read\-write mode.
76 If this feature is not read-only compatible, support is also required to
77 import the pool in read\-only mode (see "Read\-only compatibility").
79 An administrator has marked this feature as enabled on the pool, but the
80 feature's on\-disk format changes have not been made yet.
81 The pool can still be imported by software that does not support this feature,
82 but changes may be made to the on\-disk format at any time which will move
86 Some features may support returning to the
90 See feature\-specific documentation for details.
92 This feature's on\-disk format changes have not been made and will not be made
93 unless an administrator moves the feature to the
96 Features cannot be disabled once they have been enabled.
99 The state of supported features is exposed through pool properties of the form
100 .Sy feature@short_name .
101 .Ss Read\-only compatibility
102 Some features may make on\-disk format changes that do not interfere with other
103 software's ability to read from the pool.
104 These features are referred to as "read\-only compatible".
105 If all unsupported features on a pool are read\-only compatible, the pool can
106 be imported in read\-only mode by setting the
108 property during import (see
110 for details on importing pools).
111 .Ss Unsupported features
112 For each unsupported feature enabled on an imported pool a pool property
114 .Sy unsupported@feature_guid
115 will indicate why the import was allowed despite the unsupported feature.
116 Possible values for this property are:
117 .Bl -tag -width "XXXXXXXX"
119 The feature is in the
121 state and therefore the pool's on\-disk format is still compatible with
122 software that does not support this feature.
124 The feature is read\-only compatible and the pool has been imported in
127 .Ss Feature dependencies
128 Some features depend on other features being enabled in order to function
130 Enabling a feature will automatically enable any features it depends on.
132 The following features are supported on this system:
133 .Bl -tag -width "XXXXXXXX"
135 .Bl -column "READ\-ONLY COMPATIBLE" "com.delphix:async_destroy"
136 .It GUID Ta com.delphix:async_destroy
137 .It READ\-ONLY COMPATIBLE Ta yes
138 .It DEPENDENCIES Ta none
141 Destroying a file system requires traversing all of its data in order to
142 return its used space to the pool.
145 the file system is not fully removed until all space has been reclaimed.
146 If the destroy operation is interrupted by a reboot or power outage the next
147 attempt to open the pool will need to complete the destroy operation
152 is enabled the file system's data will be reclaimed by a background process,
153 allowing the destroy operation to complete without traversing the entire file
155 The background process is able to resume interrupted destroys after the pool
156 has been opened, eliminating the need to finish interrupted destroys as part
157 of the open operation.
158 The amount of space remaining to be reclaimed by the background process is
159 available through the
169 .Bl -column "READ\-ONLY COMPATIBLE" "com.delphix:empty_bpobj"
170 .It GUID Ta com.delphix:empty_bpobj
171 .It READ\-ONLY COMPATIBLE Ta yes
172 .It DEPENDENCIES Ta none
175 This feature increases the performance of creating and using a large number
176 of snapshots of a single filesystem or volume, and also reduces the disk
179 When there are many snapshots, each snapshot uses many Block Pointer Objects
181 to track blocks associated with that snapshot.
182 However, in common use cases, most of these bpobj's are empty.
183 This feature allows us to create each bpobj on-demand, thus eliminating the
188 while there are any filesystems, volumes, or snapshots which were created
189 after enabling this feature.
191 .Bl -column "READ\-ONLY COMPATIBLE" "org.illumos:lz4_compress"
192 .It GUID Ta org.illumos:lz4_compress
193 .It READ\-ONLY COMPATIBLE Ta no
194 .It DEPENDENCIES Ta none
198 is a high-performance real-time compression algorithm that
199 features significantly faster compression and decompression as well as a
200 higher compression ratio than the older
205 compression is approximately 50% faster on
206 compressible data and 200% faster on incompressible data than
208 It is also approximately 80% faster on decompression, while
209 giving approximately 10% better compression ratio.
216 administrator can turn on
218 compression on any dataset on the
221 command. Please note that doing so will
222 immediately activate the
224 feature on the underlying
225 pool (even before any data is written). Since this feature is not
226 read-only compatible, this operation will render the pool unimportable
227 on systems without support for the
230 moment, this operation cannot be reversed. Booting off of
232 -compressed root pools is supported.
233 .It Sy multi_vdev_crash_dump
234 .Bl -column "READ\-ONLY COMPATIBLE" "com.joyent:multi_vdev_crash_dump"
235 .It GUID Ta com.joyent:multi_vdev_crash_dump
236 .It READ\-ONLY COMPATIBLE Ta no
237 .It DEPENDENCIES Ta none
240 This feature allows a dump device to be configured with a pool comprised
242 Those vdevs may be arranged in any mirrored or raidz
244 .\" TODO: this is not yet supported on FreeBSD.
247 .\" .Sy multi_vdev_crash_dump
248 .\" feature is set to
250 .\" the administrator can use the
252 .\" command to configure a
253 .\" dump device on a pool comprised of multiple vdevs.
254 .It Sy spacemap_histogram
255 .Bl -column "READ\-ONLY COMPATIBLE" "com.delphix:spacemap_histogram"
256 .It GUID Ta com.delphix:spacemap_histogram
257 .It READ\-ONLY COMPATIBLE Ta yes
258 .It DEPENDENCIES Ta none
261 This features allows ZFS to maintain more information about how free space
262 is organized within the pool. If this feature is
267 when a new space map object is created or
268 an existing space map is upgraded to the new format.
271 it will remain in that state until the pool is destroyed.
272 .It Sy extensible_dataset
273 .Bl -column "READ\-ONLY COMPATIBLE" "com.delphix:extensible_dataset"
274 .It GUID Ta com.delphix:extensible_dataset
275 .It READ\-ONLY COMPATIBLE Ta no
276 .It DEPENDENCIES Ta none
279 This feature allows more flexible use of internal ZFS data structures,
280 and exists for other features to depend on.
284 when the first dependent feature uses it,
285 and will be returned to the
287 state when all datasets that use
288 this feature are destroyed.
293 This manual page is a
295 reimplementation of the
298 .Em zpool-features(5) ,
299 modified and customized for
301 and licensed under the Common Development and Distribution License
306 implementation of this manual page was initially written by
307 .An Martin Matuska Aq mm@FreeBSD.org .