3 o Added James Ramsey's proposed CHAPTER_TITLE macro, along with his
4 rewritten START macro and his utility macros to make START easier
7 o Expanded handling of CHAPTER_TITLE to encompass TYPEWRITE, as well as
8 plugging it into the docheaders. Made CHAPTER_TITLE backwardly
9 compatible so that pre-1.1.5 docs using CHAPTER_STRING to create a
10 chapter title remain unaffected when groffed with 1.1.5.
12 o Created control macros for CHAPTER_TITLE FAMILY, FONT and SIZE.
13 Added defaults for handling of CHAPTER title to DEFAULTS. Documented
14 CHAPTER_TITLE and everything that goes along with it.
16 o Fixed broken draft and revision in headers/footers.
18 o Fixed \*[RULE] so that it behaves properly with indents and justified
21 o Fixed/tweaked handling of epigraph spacing in TYPEWRITE.
23 o Fixed broken spacing of docheaders in TYPEWRITE.
27 o Fixed an oversight in CLOSING for DOCTYPE LETTER (closing wasn't
32 o Changed .ne in .HEAD when PRINTSTYLE TYPESET from 5 to 4. With 5,
33 heads required at least 2 lines of text underneath or they'd be
34 defered to the next page, which created too much whitespace at the
35 end of the page. Heads will now be processed on the same page if the
36 head plus at least one line of text underneath fits. I figure it's
37 easier for the user to break to a new page manually if this behaviour
38 is unsatisfactory than to massage the page to fix the excess
43 o Changed .IX to .IQ. The older form still works, but emits a message
44 advising the user to update to the newer. (The macro in om.tmac
45 still remains IX; IQ is an alias.) Docs updated to reflect the
50 o Added new (better) way to handle inline kerning. \*[BU #] and
51 \*[FU #] allow passing an argument to the inline string. The older
52 forms \*[BU#] and \*[FU#] still work, though.
54 o Changed handling of inline horizontal and vertical movements.
55 Horizontal movements are now done with \*[BCK #<unit>] and
56 \*[FWD #<unit>]; verticals with \*[UP #<unit>] and \*[DOWN #<unit>].
57 The older forms \*[FP#] and \*[BP#] still work (horizontals), as do
58 \*[ALD#] and \*[RLD#] (verticals).
62 o Fixed ENDNOTES so footnotes output properly when ENDNOTES is called
64 o Added ENDNOTES_HDRFTR_CENTER so that default no-print of header
65 center string on endnotes page(s) when DOCTYPE is CHAPTER can
66 be disabled (i.e. header center will be printed).
70 o Added .nf to top of PAD, with a test beforehand for current fill
71 mode. If fill mode was on, it's restored after PAD completes
72 processing. Updated reserved.html to include number register
77 o Makefile.sub (FFLAG, TFLAG): Add paths to source directories.
81 o Makefile.sub (groff_bin_path): Don't use ' \+' but ' *' for sed.
82 (GROFF): Set GROFF_COMMAND_PREFIX to empty value.
86 o More fixes to underlining.
90 o Added capability of endnotes and pertinent control macros to om.tmac.
92 o Added document entries pertaining to endnote macros.
94 o Incorporated endnote macros into elvis_syntax.
98 o Tidied up indenting of om.tmac.
100 o Fixed handling of underlining of italics in PRINTSTYLE TYPEWRITE
101 (there was a problem with footnotes getting underlined when they
102 shouldn't have been).
104 o Removed ENDNOTES from TODO
106 o Fixed the character translations for UNDERLINE so they work properly
111 o Expanded docprocessing.html entry "Special Note on Chapters". Tidied
116 o examples/macros.mom: Fix path to penguin.ps.
120 o Small fix to PAD to make the use of inlines within the pad string
123 o Added \*[RULE] ( = \l'\n(.lu' ) so that full measure rules (either to
124 full line length or within tabs) are easier to set.
128 o Macro .PS renamed to .PT_SIZE. Alias .TS removed.
130 o .tr bits in .CAPS rewritten in the form .tr é\['E].
132 o General cleanup of docs to reflect changes.
134 o Small changes/additions to `elvis_syntax'.
138 o In DOCTYPE, in .if '\\$1'LETTER', added .FOOTER_RIGHT_SIZE +0.
139 Without it, the suite page was printing at the default
140 FOOTER_RIGHT_SIZE of -.5, which didn't look good.
144 o Makefile.sub (TFLAG): Add `$(top_builddir)/tmac'.
148 o Makefile.sub (groff_bin_dirs): Fix typo (forgotten `src' element).
152 o Makefile.sub (uninstall_sub): Don't use `momdocdir' but `htmldocdir'.
153 Add missing backslash.
157 o Makefile.in (prepare_make_examples): Test for `penguin.ps', not
158 `examples/penguin.ps'.
162 o Rewrote portions of PAGENUM_STYLE and COPYSTYLE so that PAGENUM_STYLE
163 behaves as advertised.
167 o /Makefile.sub (momdocdir): Removed.
168 (HTMLDOCFILES): Prepend `momdoc/'.
169 (EXTRAEXAMPLEFILES): Removed. Added entries to...
170 (EXAMPLEFILES): This.
171 (.SUFFIXES, .mom.ps): New.
172 (prepare_make_examples): Updated.
173 (examples/*.ps): Removed; .mom.ps will handle this.
174 (install_data): Updated.
178 o Applied two small bug fixes to om.tmac (patches 1.1.1a and 1.1.1b).
180 o mom is now part of groff.
182 o Some renaming to avoid problems with 8+3 filesystems:
184 examples/docprocessing_typeset.mom -> examples/typeset.mom
185 examples/docprocessing_typewrite.mom -> examples/typewrite.mom
186 examples/typesetting_macros.mom -> examples/macros.mom
187 examples/penguin_small2_bw.ps -> examples/penguin.ps
189 o Removed `INSTALL' and `README' since groff takes care of installation
192 o Added Makefile.sub.
194 o Added mom.tmac (which simply calls om.tmac).
196 o Added groff_mom.man for orthogonality; it simply points to the HTML
201 o Added macro DRAFT_WITH_PAGENUMBER so user can have draft/revision
202 info attached to the pagenumber in COPYSTYLE DRAFT, instead of having
203 it HEADER center. Always having it HEADER center was creating problems
204 with long doc titles, esp. with PRINTSTYLE TYPEWRITE (which is when
205 COPYSTYLE DRAFT is most likely to be used). Now user has the choice,
206 in these circumstances, either to reduce HEADER_SIZE, or to displace
207 the draft/revision info. Also rewrote portions of COPYSTYLE so that
208 if no revision number is given in the reference macros, "Rev. #"
209 doesn't appear when COPYSTYLE DRAFT.
213 o Added capability of user-defined, single string recto/verso
216 o Added new entries to docs about the above. Made some additional
217 small changes to toc.html, rectoverso.html, and headfootpage.html
218 to supplement the new entries.
220 o Small fix to handling of footer separator rule -- was 1 point too low
221 owing to fuzziness of #CAP_HEIGHT as returned by SIZESPECS.
223 o Added some more useful stuff to elvis_syntax.
227 o Fix to DEFAULTS so that L_MARGIN and R_MARGIN are reprocessed if
228 DOCTYPE LETTER. R_MARGIN, as set by DOCTYPE LETTER had no preceding
229 PAGEWIDTH or PAPER from which to get #PAGE_WIDTH for figuring out
232 o Additional fix to DEFAULTS in handling DOCTYPE LETTER so that if user
233 sets line length prior to START, no reprocessing of R_MARGIN occurs.
234 This necessitated adding a new number register: #USER_SET_L_LENGTH
236 *Sat May 04 23:48:05 EDT 2002
238 o Added .cflags 4 /\(en -- was driving me nuts that lines wouldn't
239 break after these characters; I'm assuming others feel the same way
243 o Made some small fixes to space handling around quotes, mostly to do
244 with quotes immediately after START and quotes after (sub)heads.
248 o Fixed a small bug that was causing the first .PP after START to begin
249 at the top margin of the page regardless of any type that preceded
250 .PP when docheaders were off.
252 o Fixed HEADER so that when HEADERS are off the first line of type on
253 pages after the first falls properly at the top margin
257 o Renamed docprocessing_macros.mom in /examples to
258 docprocessing_typeset.mom. Added docprocessing_typewrite.mom, as
259 well as a README file.
261 o Fixed UNDERLINE_QUOTES (for PRINTSTYLE TYPEWRITE) so they really are
262 on by default as the docs say.
264 o Changes to doc entry on COLLATE:
266 - removed bit about using COLLATE after a cover page (I wrote the
267 entry *before* I wrote the macro!). Cover pages should be
268 followed by NEWPAGE, not COLLATE.
270 - added caution about mixing PRINTSTYLEs
272 - added caution about using DOC_FAMILY to change family of all
273 document elements after COLLATE
275 o Made HEADER_SIZE (and, by extension, FOOTER_SIZE) available to
276 PRINTSTYLE TYPEWRITE. Changed appropriate doc entries to reflect
281 o Small change to DO_QUOTE to correct a problem with quotes and
282 blockquotes that fall in the middle of paragraphs (i.e. text after
283 the quote is not a new para). Basically, added a bit that stores the
284 current para indent, sets para indent to 0, invokes a PP, then
285 restores the original para indent.
287 o Added new macro, BREAK_QUOTE, to deal with the problem of
288 footnotes in quotes and blockquotes that cross pages or columns.
290 Quotes and blockquotes are read into diversions, which means they
291 get their footnote information from the page/column on which they
292 were started. If a footnoted quote crosses a page/column, what
293 sometimes happens is that the footnote itself is output at the
294 bottom of page/column where the quote started, whereas the text
295 marker for the footnote appears on the next page/column where the
296 quote ends. Furthermore, the text marker is the one appropriate
297 to the previous page. BREAK_QUOTE is a workaround.
299 o Added directory /examples to archive.
301 o Added typesetting_macros.mom, docprocessing_macros.mom, elvis_syntax
302 and penguin_small2_bw.ps to /examples.
304 o Added BREAK_QUOTE to docs, made some additions to reserved words
305 list, and corrected a few little doc errors.
309 o Added default .L_MARGIN 1i and .R_MARGIN 1i to PAPER, PAGE, and
310 PAGEWIDTH. L_MARGIN is essential otherwise left indents and tabs
311 don't have a register #L_MARGIN to work with. The default right
312 margin is a convenience only. Updated the doc entries for L_MARGIN
313 and R_MARGIN to reflect the change.
317 o Changes to COLLATE:
319 - added some "resets" (LL, LS, QUAD)
320 - added a check for whether pagination is at page top (either
321 because FOOTERS are on or because PAGENUM_POS was user set).
322 If pagination is on, and PAGENUM_POS is TOP, it's turned off
323 for next page (start of next collated document) and restored
324 for subsequent pages unless PAGENUM_ON_FIRST_PAGE is on, in
325 which case the page number appears at page top.
327 o The macro TRAPS is always invoked at the end of DEFAULTS (which is
328 called by START). Formerly, TRAPS was only invoked at the start
329 of a doc, not after COLLATE. Now runs after COLLATE as well.
331 o Distance from $DOC_TYPE in DOCTYPE NAMED "<string>" to start of
332 running text was one linespace too deep. Fixed (in START).
334 o When 1st arg to PAGENUM_POS was user set to TOP, running text was
335 printing 1 linespace too high, even when PAGINATION was OFF. Same
336 problem when HEADERS were OFF (i.e. nothing in the header margin at
337 all). Fixed by removing -\\n[#DOC_LEAD]u from all .sp |\\n[#T_MARGIN]u
338 calls of .el portion after .ie \\n[#HEADERS_ON].
340 o Added new macro: PAGENUM_ON_FIRST_PAGE. Normally, when FOOTERS are
341 being used instead of HEADERS, mom doesn't print the page number at
342 the top of the first page of a doc, or the first page of collated
343 docs. New macro allows user to get mom to put the page number on
344 "first" pages if that's desired. Updated docs to include the macro.
346 o More little fixes to docs.
350 o Fixed TI (temporary indent) so that it continues to work as expected,
351 even when called while another type of indent is in effect.
355 o String tabs weren't working as advertised when set from within
356 a tab. Fixed. Two new registers added: #ST_OFFSET and #IN_TAB.
357 String tabs now behave poperly and intuitively when set within tabs.
359 o Added a note to docs about surrounding \w'...' escape with double-
360 quotes when it's used as an argument to macros
362 o Added a note to docs that SILENT does not deposit a .br
366 o Added new macro BR_AT_LINE_KERN if user wants mom to deposit .br's
367 before .RW and/or .EW.
369 o Added 1/4 points to inline escapes \*[ALD] and \*[RLD].
371 o Added 1/4 points to inline escapes \*[FP] and \*[BP]
373 o Updated docs to reflect the above changes.
377 o Fixed .RW and .EW which weren't working because of a missing \ in
378 \\n(.f register. Also made it so that .RW and .EW affect all fonts
379 in positions 1, 2, 3, and 4 at once, hence line kerning now affects
380 all fonts that appear after it, not just the font that was current at
381 the time of the macros' invocation.
383 o .SS and .WS now working properly. .WS no longer has any effect on
384 .SS, which remains constant regardless of .WS. Furthermore, .SS no
385 longer gets its value by adding \*[$SS_VAR] + \n[.ss]. Instead,
386 it remains constant. Don't know what I was thinking when I wrote
387 the routine in the first place.
389 o Updated and rewrote doc entry pertaining to SS
393 o Renamed tmac.om to om.tmac to bring macro file's name into line
394 with current groff policy
396 o Added more standard paper sizes to PAPER.
398 o Fixed T_MARGIN, LS, and AUTOLEAD so that if T_MARGIN is set before LS
399 or AUTOLEAD at the top of a file, the first line of type falls
400 properly on the baseline set by T_MARGIN. Previously, LS and
401 AUTOLEAD automatically advanced by the value passed to them before
402 setting the first line of type, meaning that the first line of type
403 fell at T_MARGINu+1v instead of T_MARGIN.
405 o Updated docs to reflect changes.
407 o Removed #TEST_FOR_NUMERIC from list of reserved words.
409 o Added "t" and #T_MARGIN_SET to list of reserved words.
413 o Added FACTOR arg to AUTOLEAD, so if user wants autolead to be a factor
414 of point size, instead of being the sum of pointsize + autolead, s/he
415 has the choice. Incorporated appropriate changes to PS and LS.
417 o Added new register #AUTOLEAD_FACTOR to reserved words. Modified
418 comments for AUTOLEAD, PS, and LS to reflect changes. Also
419 corrected an error where #AUTOLEAD_VALUE had mistakenly been written
420 $AUTOLEAD_VALUE in comments in the macro file, and removed erroneous
421 | <anything>. Updated AUTOLEAD entry in momdoc/typesetting.html
422 to reflect the changes.
426 o Cleaned up html errors in the docs.
428 o Added "Next," "Prev" and "Top" links to top and bottom of doc files.
430 o Fixed some typos in the docs.