2 * Copyright (c) 1993, 1994, 1995, 1996, 1997
3 * The Regents of the University of California. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that: (1) source code distributions
7 * retain the above copyright notice and this paragraph in its entirety, (2)
8 * distributions including binary code include the above copyright notice and
9 * this paragraph in its entirety in the documentation or other materials
10 * provided with the distribution, and (3) all advertising materials mentioning
11 * features or use of this software display the following acknowledgement:
12 * ``This product includes software developed by the University of California,
13 * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
14 * the University nor the names of its contributors may be used to endorse
15 * or promote products derived from this software without specific prior
17 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
18 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
19 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
26 #include <sys/param.h>
28 #include <sys/ioctl.h>
29 #include <sys/socket.h>
35 #include <netinet/in.h>
36 #include <netinet/in_systm.h>
37 #include <netinet/ip.h>
38 #include <netinet/if_ether.h>
39 #include <netinet/ip_var.h>
40 #include <netinet/udp.h>
41 #include <netinet/udp_var.h>
42 #include <netinet/tcp.h>
43 #include <netinet/tcpip.h>
53 #ifdef HAVE_OS_PROTO_H
58 * Private data for capturing on snoop devices.
61 struct pcap_stat stat;
65 pcap_read_snoop(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
67 struct pcap_snoop *psn = p->priv;
69 register struct snoopheader *sh;
70 register u_int datalen;
71 register u_int caplen;
76 * Has "pcap_breakloop()" been called?
80 * Yes - clear the flag that indicates that it
81 * has, and return -2 to indicate that we were
82 * told to break out of the loop.
87 cc = read(p->fd, (char *)p->buffer, p->bufsize);
89 /* Don't choke when we get ptraced */
98 snprintf(p->errbuf, sizeof(p->errbuf),
99 "read: %s", pcap_strerror(errno));
102 sh = (struct snoopheader *)p->buffer;
103 datalen = sh->snoop_packetlen;
106 * XXX - Sigh, snoop_packetlen is a 16 bit quantity. If we
107 * got a short length, but read a full sized snoop packet,
108 * assume we overflowed and add back the 64K...
110 if (cc == (p->snapshot + sizeof(struct snoopheader)) &&
111 (datalen < p->snapshot))
112 datalen += (64 * 1024);
114 caplen = (datalen < p->snapshot) ? datalen : p->snapshot;
115 cp = (u_char *)(sh + 1) + p->offset; /* XXX */
118 * XXX unfortunately snoop loopback isn't exactly like
119 * BSD's. The address family is encoded in the first 2
120 * bytes rather than the first 4 bytes! Luckily the last
121 * two snoop loopback bytes are zeroed.
123 if (p->linktype == DLT_NULL && *((short *)(cp + 2)) == 0) {
124 u_int *uip = (u_int *)cp;
128 if (p->fcode.bf_insns == NULL ||
129 bpf_filter(p->fcode.bf_insns, cp, datalen, caplen)) {
130 struct pcap_pkthdr h;
132 h.ts.tv_sec = sh->snoop_timestamp.tv_sec;
133 h.ts.tv_usec = sh->snoop_timestamp.tv_usec;
136 (*callback)(user, &h, cp);
143 pcap_inject_snoop(pcap_t *p, const void *buf, size_t size)
148 * XXX - libnet overwrites the source address with what I
149 * presume is the interface's address; is that required?
151 ret = write(p->fd, buf, size);
153 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "send: %s",
154 pcap_strerror(errno));
161 pcap_stats_snoop(pcap_t *p, struct pcap_stat *ps)
163 struct pcap_snoop *psn = p->priv;
164 register struct rawstats *rs;
165 struct rawstats rawstats;
168 memset(rs, 0, sizeof(*rs));
169 if (ioctl(p->fd, SIOCRAWSTATS, (char *)rs) < 0) {
170 snprintf(p->errbuf, sizeof(p->errbuf),
171 "SIOCRAWSTATS: %s", pcap_strerror(errno));
176 * "ifdrops" are those dropped by the network interface
177 * due to resource shortages or hardware errors.
179 * "sbdrops" are those dropped due to socket buffer limits.
181 * As filter is done in userland, "sbdrops" counts packets
182 * regardless of whether they would've passed the filter.
184 * XXX - does this count *all* Snoop or Drain sockets,
185 * rather than just this socket? If not, why does it have
186 * both Snoop and Drain statistics?
189 rs->rs_snoop.ss_ifdrops + rs->rs_snoop.ss_sbdrops +
190 rs->rs_drain.ds_ifdrops + rs->rs_drain.ds_sbdrops;
193 * "ps_recv" counts only packets that passed the filter.
194 * As filtering is done in userland, this does not include
195 * packets dropped because we ran out of buffer space.
201 /* XXX can't disable promiscuous */
203 pcap_activate_snoop(pcap_t *p)
206 struct sockaddr_raw sr;
207 struct snoopfilter sf;
213 fd = socket(PF_RAW, SOCK_RAW, RAWPROTO_SNOOP);
215 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "snoop socket: %s",
216 pcap_strerror(errno));
220 memset(&sr, 0, sizeof(sr));
221 sr.sr_family = AF_RAW;
222 (void)strncpy(sr.sr_ifname, p->opt.source, sizeof(sr.sr_ifname));
223 if (bind(fd, (struct sockaddr *)&sr, sizeof(sr))) {
224 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "snoop bind: %s",
225 pcap_strerror(errno));
228 memset(&sf, 0, sizeof(sf));
229 if (ioctl(fd, SIOCADDSNOOP, &sf) < 0) {
230 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "SIOCADDSNOOP: %s",
231 pcap_strerror(errno));
234 if (p->opt.buffer_size != 0)
235 v = p->opt.buffer_size;
237 v = 64 * 1024; /* default to 64K buffer size */
238 (void)setsockopt(fd, SOL_SOCKET, SO_RCVBUF, (char *)&v, sizeof(v));
240 * XXX hack - map device name to link layer type
242 if (strncmp("et", p->opt.source, 2) == 0 || /* Challenge 10 Mbit */
243 strncmp("ec", p->opt.source, 2) == 0 || /* Indigo/Indy 10 Mbit,
245 strncmp("ef", p->opt.source, 2) == 0 || /* O200/2000 10/100 Mbit */
246 strncmp("eg", p->opt.source, 2) == 0 || /* Octane/O2xxx/O3xxx Gigabit */
247 strncmp("gfe", p->opt.source, 3) == 0 || /* GIO 100 Mbit */
248 strncmp("fxp", p->opt.source, 3) == 0 || /* Challenge VME Enet */
249 strncmp("ep", p->opt.source, 2) == 0 || /* Challenge 8x10 Mbit EPLEX */
250 strncmp("vfe", p->opt.source, 3) == 0 || /* Challenge VME 100Mbit */
251 strncmp("fa", p->opt.source, 2) == 0 ||
252 strncmp("qaa", p->opt.source, 3) == 0 ||
253 strncmp("cip", p->opt.source, 3) == 0 ||
254 strncmp("el", p->opt.source, 2) == 0) {
255 p->linktype = DLT_EN10MB;
256 p->offset = RAW_HDRPAD(sizeof(struct ether_header));
257 ll_hdrlen = sizeof(struct ether_header);
259 * This is (presumably) a real Ethernet capture; give it a
260 * link-layer-type list with DLT_EN10MB and DLT_DOCSIS, so
261 * that an application can let you choose it, in case you're
262 * capturing DOCSIS traffic that a Cisco Cable Modem
263 * Termination System is putting out onto an Ethernet (it
264 * doesn't put an Ethernet header onto the wire, it puts raw
265 * DOCSIS frames out on the wire inside the low-level
268 * XXX - are there any sorts of "fake Ethernet" that have
269 * Ethernet link-layer headers but that *shouldn't offer
270 * DLT_DOCSIS as a Cisco CMTS won't put traffic onto it
271 * or get traffic bridged onto it? "el" is for ATM LANE
272 * Ethernet devices, so that might be the case for them;
273 * the same applies for "qaa" classical IP devices. If
274 * "fa" devices are for FORE SPANS, that'd apply to them
275 * as well; what are "cip" devices - some other ATM
276 * Classical IP devices?
278 p->dlt_list = (u_int *) malloc(sizeof(u_int) * 2);
280 * If that fails, just leave the list empty.
282 if (p->dlt_list != NULL) {
283 p->dlt_list[0] = DLT_EN10MB;
284 p->dlt_list[1] = DLT_DOCSIS;
287 } else if (strncmp("ipg", p->opt.source, 3) == 0 ||
288 strncmp("rns", p->opt.source, 3) == 0 || /* O2/200/2000 FDDI */
289 strncmp("xpi", p->opt.source, 3) == 0) {
290 p->linktype = DLT_FDDI;
291 p->offset = 3; /* XXX yeah? */
293 } else if (strncmp("ppp", p->opt.source, 3) == 0) {
294 p->linktype = DLT_RAW;
295 ll_hdrlen = 0; /* DLT_RAW meaning "no PPP header, just the IP packet"? */
296 } else if (strncmp("qfa", p->opt.source, 3) == 0) {
297 p->linktype = DLT_IP_OVER_FC;
299 } else if (strncmp("pl", p->opt.source, 2) == 0) {
300 p->linktype = DLT_RAW;
301 ll_hdrlen = 0; /* Cray UNICOS/mp pseudo link */
302 } else if (strncmp("lo", p->opt.source, 2) == 0) {
303 p->linktype = DLT_NULL;
306 snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
307 "snoop: unknown physical layer type");
313 * No monitor mode on Irix (no Wi-Fi devices on
314 * hardware supported by Irix).
316 return (PCAP_ERROR_RFMON_NOTSUP);
321 * XXX - IRIX appears to give you an error if you try to set the
322 * capture length to be greater than the MTU, so let's try to get
323 * the MTU first and, if that succeeds, trim the snap length
324 * to be no greater than the MTU.
326 (void)strncpy(ifr.ifr_name, p->opt.source, sizeof(ifr.ifr_name));
327 if (ioctl(fd, SIOCGIFMTU, (char *)&ifr) < 0) {
328 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "SIOCGIFMTU: %s",
329 pcap_strerror(errno));
335 * XXX - some versions of IRIX 6.5 define "ifr_mtu" and have an
336 * "ifru_metric" member of the "ifr_ifru" union in an "ifreq"
337 * structure, others don't.
339 * I've no idea what's going on, so, if "ifr_mtu" isn't defined,
340 * we define it as "ifr_metric", as using that field appears to
341 * work on the versions that lack "ifr_mtu" (and, on those that
342 * don't lack it, "ifru_metric" and "ifru_mtu" are both "int"
343 * members of the "ifr_ifru" union, which suggests that they
344 * may be interchangeable in this case).
347 #define ifr_mtu ifr_metric
349 if (p->snapshot > ifr.ifr_mtu + ll_hdrlen)
350 p->snapshot = ifr.ifr_mtu + ll_hdrlen;
354 * The argument to SIOCSNOOPLEN is the number of link-layer
355 * payload bytes to capture - it doesn't count link-layer
358 snooplen = p->snapshot - ll_hdrlen;
361 if (ioctl(fd, SIOCSNOOPLEN, &snooplen) < 0) {
362 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "SIOCSNOOPLEN: %s",
363 pcap_strerror(errno));
367 if (ioctl(fd, SIOCSNOOPING, &v) < 0) {
368 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "SIOCSNOOPING: %s",
369 pcap_strerror(errno));
373 p->bufsize = 4096; /* XXX */
374 p->buffer = (u_char *)malloc(p->bufsize);
375 if (p->buffer == NULL) {
376 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "malloc: %s",
377 pcap_strerror(errno));
382 * "p->fd" is a socket, so "select()" should work on it.
384 p->selectable_fd = p->fd;
386 p->read_op = pcap_read_snoop;
387 p->inject_op = pcap_inject_snoop;
388 p->setfilter_op = install_bpf_program; /* no kernel filtering */
389 p->setdirection_op = NULL; /* Not implemented. */
390 p->set_datalink_op = NULL; /* can't change data link type */
391 p->getnonblock_op = pcap_getnonblock_fd;
392 p->setnonblock_op = pcap_setnonblock_fd;
393 p->stats_op = pcap_stats_snoop;
397 pcap_cleanup_live_common(p);
402 pcap_create_interface(const char *device, char *ebuf)
406 p = pcap_create_common(device, ebuf, sizeof (struct pcap_snoop));
410 p->activate_op = pcap_activate_snoop;
415 pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)