1 # Makefile.in generated by automake 1.15 from Makefile.am.
4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 if test -z '$(MAKELEVEL)'; then \
20 elif test -n '$(MAKE_HOST)'; then \
22 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
28 am__make_running_with_option = \
29 case $${target_option-} in \
31 *) echo "am__make_running_with_option: internal error: invalid" \
32 "target option '$${target_option-}' specified" >&2; \
36 sane_makeflags=$$MAKEFLAGS; \
37 if $(am__is_gnu_make); then \
38 sane_makeflags=$$MFLAGS; \
43 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
44 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
50 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52 for flg in $$sane_makeflags; do \
53 test $$skip_next = yes && { skip_next=no; continue; }; \
56 -*I) strip_trailopt 'I'; skip_next=yes;; \
57 -*I?*) strip_trailopt 'I';; \
58 -*O) strip_trailopt 'O'; skip_next=yes;; \
59 -*O?*) strip_trailopt 'O';; \
60 -*l) strip_trailopt 'l'; skip_next=yes;; \
61 -*l?*) strip_trailopt 'l';; \
62 -[dEDm]) skip_next=yes;; \
63 -[JT]) skip_next=yes;; \
66 *$$target_option*) has_opt=yes; break;; \
70 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
71 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
72 pkgdatadir = $(datadir)/@PACKAGE@
73 pkgincludedir = $(includedir)/@PACKAGE@
74 pkglibdir = $(libdir)/@PACKAGE@
75 pkglibexecdir = $(libexecdir)/@PACKAGE@
76 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
77 install_sh_DATA = $(install_sh) -c -m 644
78 install_sh_PROGRAM = $(install_sh) -c
79 install_sh_SCRIPT = $(install_sh) -c
80 INSTALL_HEADER = $(INSTALL_DATA)
81 transform = $(program_transform_name)
88 build_triplet = @build@
91 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
92 am__aclocal_m4_deps = $(top_srcdir)/sntp/libopts/m4/libopts.m4 \
93 $(top_srcdir)/sntp/libopts/m4/stdnoreturn.m4 \
94 $(top_srcdir)/sntp/m4/ax_c99_struct_init.m4 \
95 $(top_srcdir)/sntp/m4/define_dir.m4 \
96 $(top_srcdir)/sntp/m4/hms_search_lib.m4 \
97 $(top_srcdir)/sntp/m4/libtool.m4 \
98 $(top_srcdir)/sntp/m4/ltoptions.m4 \
99 $(top_srcdir)/sntp/m4/ltsugar.m4 \
100 $(top_srcdir)/sntp/m4/ltversion.m4 \
101 $(top_srcdir)/sntp/m4/lt~obsolete.m4 \
102 $(top_srcdir)/sntp/m4/ntp_af_unspec.m4 \
103 $(top_srcdir)/sntp/m4/ntp_cacheversion.m4 \
104 $(top_srcdir)/sntp/m4/ntp_compiler.m4 \
105 $(top_srcdir)/sntp/m4/ntp_crosscompile.m4 \
106 $(top_srcdir)/sntp/m4/ntp_crypto_rand.m4 \
107 $(top_srcdir)/sntp/m4/ntp_debug.m4 \
108 $(top_srcdir)/sntp/m4/ntp_dir_sep.m4 \
109 $(top_srcdir)/sntp/m4/ntp_facilitynames.m4 \
110 $(top_srcdir)/sntp/m4/ntp_googletest.m4 \
111 $(top_srcdir)/sntp/m4/ntp_harden.m4 \
112 $(top_srcdir)/sntp/m4/ntp_ipv6.m4 \
113 $(top_srcdir)/sntp/m4/ntp_lib_m.m4 \
114 $(top_srcdir)/sntp/m4/ntp_libevent.m4 \
115 $(top_srcdir)/sntp/m4/ntp_libntp.m4 \
116 $(top_srcdir)/sntp/m4/ntp_lineeditlibs.m4 \
117 $(top_srcdir)/sntp/m4/ntp_locinfo.m4 \
118 $(top_srcdir)/sntp/m4/ntp_openssl.m4 \
119 $(top_srcdir)/sntp/m4/ntp_pkg_config.m4 \
120 $(top_srcdir)/sntp/m4/ntp_problemtests.m4 \
121 $(top_srcdir)/sntp/m4/ntp_prog_cc.m4 \
122 $(top_srcdir)/sntp/m4/ntp_rlimit.m4 \
123 $(top_srcdir)/sntp/m4/ntp_sntp.m4 \
124 $(top_srcdir)/sntp/m4/ntp_unitytest.m4 \
125 $(top_srcdir)/sntp/m4/ntp_ver_suffix.m4 \
126 $(top_srcdir)/sntp/m4/ntp_vpathhack.m4 \
127 $(top_srcdir)/sntp/m4/openldap-thread-check.m4 \
128 $(top_srcdir)/sntp/m4/openldap.m4 \
129 $(top_srcdir)/sntp/m4/os_cflags.m4 \
130 $(top_srcdir)/sntp/m4/snprintf.m4 \
131 $(top_srcdir)/sntp/m4/version.m4 $(top_srcdir)/configure.ac
132 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
134 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
135 $(am__configure_deps) $(am__DIST_COMMON)
136 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
137 configure.lineno config.status.lineno
138 mkinstalldirs = $(install_sh) -d
139 CONFIG_HEADER = config.h
141 CONFIG_CLEAN_VPATH_FILES =
142 AM_V_P = $(am__v_P_@AM_V@)
143 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
146 AM_V_GEN = $(am__v_GEN_@AM_V@)
147 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
148 am__v_GEN_0 = @echo " GEN " $@;
150 AM_V_at = $(am__v_at_@AM_V@)
151 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
156 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
157 ctags-recursive dvi-recursive html-recursive info-recursive \
158 install-data-recursive install-dvi-recursive \
159 install-exec-recursive install-html-recursive \
160 install-info-recursive install-pdf-recursive \
161 install-ps-recursive install-recursive installcheck-recursive \
162 installdirs-recursive pdf-recursive ps-recursive \
163 tags-recursive uninstall-recursive
164 am__can_run_installinfo = \
165 case $$AM_UPDATE_INFO_DIR in \
167 *) (install-info --version) >/dev/null 2>&1;; \
169 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
170 distclean-recursive maintainer-clean-recursive
171 am__recursive_targets = \
172 $(RECURSIVE_TARGETS) \
173 $(RECURSIVE_CLEAN_TARGETS) \
174 $(am__extra_recursive_targets)
175 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
176 cscope distdir dist dist-all distcheck
177 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
179 # Read a list of newline-separated strings from the standard input,
180 # and print each of them once, without duplicates. Input order is
182 am__uniquify_input = $(AWK) '\
183 BEGIN { nonempty = 0; } \
184 { items[$$0] = 1; nonempty = 1; } \
185 END { if (nonempty) { for (i in items) print i; }; } \
187 # Make sure the list of sources is unique. This is necessary because,
188 # e.g., the same source file might be shared among _SOURCES variables
189 # for different programs/libraries.
190 am__define_uniq_tagged_files = \
191 list='$(am__tagged_files)'; \
192 unique=`for i in $$list; do \
193 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
194 done | $(am__uniquify_input)`
198 DIST_SUBDIRS = $(SUBDIRS)
199 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
200 $(top_srcdir)/sntp/libevent/build-aux/ar-lib \
201 $(top_srcdir)/sntp/libevent/build-aux/compile \
202 $(top_srcdir)/sntp/libevent/build-aux/config.guess \
203 $(top_srcdir)/sntp/libevent/build-aux/config.sub \
204 $(top_srcdir)/sntp/libevent/build-aux/install-sh \
205 $(top_srcdir)/sntp/libevent/build-aux/ltmain.sh \
206 $(top_srcdir)/sntp/libevent/build-aux/missing ChangeLog \
207 INSTALL NEWS README TODO sntp/libevent/build-aux/ar-lib \
208 sntp/libevent/build-aux/compile \
209 sntp/libevent/build-aux/config.guess \
210 sntp/libevent/build-aux/config.sub \
211 sntp/libevent/build-aux/depcomp \
212 sntp/libevent/build-aux/install-sh \
213 sntp/libevent/build-aux/ltmain.sh \
214 sntp/libevent/build-aux/missing sntp/libevent/build-aux/ylwrap
215 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
216 distdir = $(PACKAGE)-$(VERSION)
217 top_distdir = $(distdir)
218 am__remove_distdir = \
219 if test -d "$(distdir)"; then \
220 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
221 && rm -rf "$(distdir)" \
222 || { sleep 5 && rm -rf "$(distdir)"; }; \
224 am__post_remove_distdir = $(am__remove_distdir)
227 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
228 sed_rest='s,^[^/]*/*,,'; \
229 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
230 sed_butlast='s,/*[^/]*$$,,'; \
231 while test -n "$$dir1"; do \
232 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
233 if test "$$first" != "."; then \
234 if test "$$first" = ".."; then \
235 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
236 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
238 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
239 if test "$$first2" = "$$first"; then \
240 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
244 dir0="$$dir0"/"$$first"; \
247 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
250 DIST_ARCHIVES = $(distdir).tar.gz
252 DIST_TARGETS = dist-gzip
253 distuninstallcheck_listfiles = find . -type f -print
254 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
255 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
256 distcleancheck_listfiles = find . -type f -print
260 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
262 AUTOCONF = @AUTOCONF@
263 AUTOHEADER = @AUTOHEADER@
264 AUTOMAKE = @AUTOMAKE@
266 BUILD_THREAD = @BUILD_THREAD@
267 CALC_TICKADJ_DB = @CALC_TICKADJ_DB@
268 CALC_TICKADJ_DL = @CALC_TICKADJ_DL@
269 CALC_TICKADJ_DS = @CALC_TICKADJ_DS@
270 CALC_TICKADJ_MS = @CALC_TICKADJ_MS@
271 CALC_TICKADJ_NI = @CALC_TICKADJ_NI@
273 CCDEPMODE = @CCDEPMODE@
275 CFLAGS_LIBEVENT = @CFLAGS_LIBEVENT@
276 CFLAGS_NTP = @CFLAGS_NTP@
278 CONFIG_SHELL = @CONFIG_SHELL@
280 CPPFLAGS = @CPPFLAGS@
281 CPPFLAGS_LIBEVENT = @CPPFLAGS_LIBEVENT@
282 CPPFLAGS_NTP = @CPPFLAGS_NTP@
283 CYGPATH_W = @CYGPATH_W@
288 DSYMUTIL = @DSYMUTIL@
293 EDITLINE_LIBS = @EDITLINE_LIBS@
298 GTEST_CONFIG = @GTEST_CONFIG@
299 GTEST_CPPFLAGS = @GTEST_CPPFLAGS@
300 GTEST_CXXFLAGS = @GTEST_CXXFLAGS@
301 GTEST_LDFLAGS = @GTEST_LDFLAGS@
302 GTEST_LIBS = @GTEST_LIBS@
303 HAVE_INLINE = @HAVE_INLINE@
304 HAVE_LEAPSMEARINTERVAL = @HAVE_LEAPSMEARINTERVAL@
305 HAVE_RLIMIT_MEMLOCK = @HAVE_RLIMIT_MEMLOCK@
306 HAVE_RLIMIT_STACK = @HAVE_RLIMIT_STACK@
308 INSTALL_DATA = @INSTALL_DATA@
309 INSTALL_PROGRAM = @INSTALL_PROGRAM@
310 INSTALL_SCRIPT = @INSTALL_SCRIPT@
311 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
313 LDADD_LIBEVENT = @LDADD_LIBEVENT@
314 LDADD_LIBNTP = @LDADD_LIBNTP@
315 LDADD_LIBUTIL = @LDADD_LIBUTIL@
316 LDADD_NLIST = @LDADD_NLIST@
317 LDADD_NTP = @LDADD_NTP@
319 LDFLAGS_NTP = @LDFLAGS_NTP@
320 LIBISC_PTHREADS_NOTHREADS = @LIBISC_PTHREADS_NOTHREADS@
323 LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
324 LIBOPTS_DIR = @LIBOPTS_DIR@
325 LIBOPTS_LDADD = @LIBOPTS_LDADD@
326 LIBPARSE = @LIBPARSE@
329 LIBTOOL_DEPS = @LIBTOOL_DEPS@
333 LTHREAD_LIBS = @LTHREAD_LIBS@
334 LTLIBOBJS = @LTLIBOBJS@
335 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
336 MAKEINFO = @MAKEINFO@
337 MAKE_ADJTIMED = @MAKE_ADJTIMED@
338 MAKE_CHECK_LAYOUT = @MAKE_CHECK_LAYOUT@
339 MAKE_CHECK_Y2K = @MAKE_CHECK_Y2K@
340 MAKE_LIBNTPSIM = @MAKE_LIBNTPSIM@
341 MAKE_LIBPARSE = @MAKE_LIBPARSE@
342 MAKE_LIBPARSE_KERNEL = @MAKE_LIBPARSE_KERNEL@
343 MAKE_NTPDSIM = @MAKE_NTPDSIM@
344 MAKE_NTPSNMPD = @MAKE_NTPSNMPD@
345 MAKE_NTPTIME = @MAKE_NTPTIME@
346 MAKE_PARSEKMODULE = @MAKE_PARSEKMODULE@
347 MAKE_TICKADJ = @MAKE_TICKADJ@
348 MAKE_TIMETRIM = @MAKE_TIMETRIM@
349 MANIFEST_TOOL = @MANIFEST_TOOL@
350 MANTAGFMT = @MANTAGFMT@
354 NTPDATE_DB = @NTPDATE_DB@
355 NTPDATE_DL = @NTPDATE_DL@
356 NTPDATE_DS = @NTPDATE_DS@
357 NTPDATE_MS = @NTPDATE_MS@
358 NTPDATE_NI = @NTPDATE_NI@
359 NTPDC_DB = @NTPDC_DB@
360 NTPDC_DL = @NTPDC_DL@
361 NTPDC_DS = @NTPDC_DS@
362 NTPDC_MS = @NTPDC_MS@
363 NTPDC_NI = @NTPDC_NI@
364 NTPDSIM_DB = @NTPDSIM_DB@
365 NTPDSIM_DL = @NTPDSIM_DL@
366 NTPDSIM_DS = @NTPDSIM_DS@
367 NTPDSIM_MS = @NTPDSIM_MS@
368 NTPDSIM_NI = @NTPDSIM_NI@
379 NTPSNMPD_DB = @NTPSNMPD_DB@
380 NTPSNMPD_DL = @NTPSNMPD_DL@
381 NTPSNMPD_DS = @NTPSNMPD_DS@
382 NTPSNMPD_MS = @NTPSNMPD_MS@
383 NTPSNMPD_NI = @NTPSNMPD_NI@
384 NTPSWEEP_DB = @NTPSWEEP_DB@
385 NTPSWEEP_DL = @NTPSWEEP_DL@
386 NTPSWEEP_DS = @NTPSWEEP_DS@
387 NTPSWEEP_MS = @NTPSWEEP_MS@
388 NTPSWEEP_NI = @NTPSWEEP_NI@
389 NTPTIME_DB = @NTPTIME_DB@
390 NTPTIME_DL = @NTPTIME_DL@
391 NTPTIME_DS = @NTPTIME_DS@
392 NTPTIME_MS = @NTPTIME_MS@
393 NTPTIME_NI = @NTPTIME_NI@
394 NTPTRACE_DB = @NTPTRACE_DB@
395 NTPTRACE_DL = @NTPTRACE_DL@
396 NTPTRACE_DS = @NTPTRACE_DS@
397 NTPTRACE_MS = @NTPTRACE_MS@
398 NTPTRACE_NI = @NTPTRACE_NI@
399 NTP_HARD_CFLAGS = @NTP_HARD_CFLAGS@
400 NTP_HARD_CPPFLAGS = @NTP_HARD_CPPFLAGS@
401 NTP_HARD_LDFLAGS = @NTP_HARD_LDFLAGS@
402 NTP_KEYGEN_DB = @NTP_KEYGEN_DB@
403 NTP_KEYGEN_DL = @NTP_KEYGEN_DL@
404 NTP_KEYGEN_DS = @NTP_KEYGEN_DS@
405 NTP_KEYGEN_MS = @NTP_KEYGEN_MS@
406 NTP_KEYGEN_NI = @NTP_KEYGEN_NI@
407 NTP_KEYSDIR = @NTP_KEYSDIR@
408 NTP_WAIT_DB = @NTP_WAIT_DB@
409 NTP_WAIT_DL = @NTP_WAIT_DL@
410 NTP_WAIT_DS = @NTP_WAIT_DS@
411 NTP_WAIT_MS = @NTP_WAIT_MS@
412 NTP_WAIT_NI = @NTP_WAIT_NI@
418 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
419 PACKAGE_NAME = @PACKAGE_NAME@
420 PACKAGE_STRING = @PACKAGE_STRING@
421 PACKAGE_TARNAME = @PACKAGE_TARNAME@
422 PACKAGE_URL = @PACKAGE_URL@
423 PACKAGE_VERSION = @PACKAGE_VERSION@
424 PATH_NET_SNMP_CONFIG = @PATH_NET_SNMP_CONFIG@
425 PATH_PERL = @PATH_PERL@
426 PATH_RUBY = @PATH_RUBY@
427 PATH_SEPARATOR = @PATH_SEPARATOR@
428 PATH_TEST = @PATH_TEST@
429 PERLLIBDIR = @PERLLIBDIR@
430 PKG_CONFIG = @PKG_CONFIG@
431 POSIX_SHELL = @POSIX_SHELL@
432 PROPDELAY = @PROPDELAY@
433 PTHREAD_LIBS = @PTHREAD_LIBS@
436 SET_MAKE = @SET_MAKE@
438 SNMP_CFLAGS = @SNMP_CFLAGS@
439 SNMP_CPPFLAGS = @SNMP_CPPFLAGS@
440 SNMP_LIBS = @SNMP_LIBS@
447 STDNORETURN_H = @STDNORETURN_H@
450 TICKADJ_DB = @TICKADJ_DB@
451 TICKADJ_DL = @TICKADJ_DL@
452 TICKADJ_DS = @TICKADJ_DS@
453 TICKADJ_MS = @TICKADJ_MS@
454 TICKADJ_NI = @TICKADJ_NI@
455 TIMETRIM_DB = @TIMETRIM_DB@
456 TIMETRIM_DL = @TIMETRIM_DL@
457 TIMETRIM_DS = @TIMETRIM_DS@
458 TIMETRIM_MS = @TIMETRIM_MS@
459 TIMETRIM_NI = @TIMETRIM_NI@
460 UPDATE_LEAP_DB = @UPDATE_LEAP_DB@
461 UPDATE_LEAP_DL = @UPDATE_LEAP_DL@
462 UPDATE_LEAP_DS = @UPDATE_LEAP_DS@
463 UPDATE_LEAP_MS = @UPDATE_LEAP_MS@
464 UPDATE_LEAP_NI = @UPDATE_LEAP_NI@
466 VER_SUFFIX = @VER_SUFFIX@
469 abs_builddir = @abs_builddir@
470 abs_srcdir = @abs_srcdir@
471 abs_top_builddir = @abs_top_builddir@
472 abs_top_srcdir = @abs_top_srcdir@
473 ac_ct_AR = @ac_ct_AR@
474 ac_ct_CC = @ac_ct_CC@
475 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
476 am__include = @am__include@
477 am__leading_dot = @am__leading_dot@
478 am__quote = @am__quote@
480 am__untar = @am__untar@
483 build_alias = @build_alias@
484 build_cpu = @build_cpu@
485 build_os = @build_os@
486 build_vendor = @build_vendor@
487 builddir = @builddir@
489 datarootdir = @datarootdir@
492 exec_prefix = @exec_prefix@
494 host_alias = @host_alias@
495 host_cpu = @host_cpu@
497 host_vendor = @host_vendor@
499 includedir = @includedir@
501 install_sh = @install_sh@
503 libexecdir = @libexecdir@
504 localedir = @localedir@
505 localstatedir = @localstatedir@
508 oldincludedir = @oldincludedir@
511 program_transform_name = @program_transform_name@
514 sharedstatedir = @sharedstatedir@
517 sysconfdir = @sysconfdir@
518 target_alias = @target_alias@
519 top_build_prefix = @top_build_prefix@
520 top_builddir = @top_builddir@
521 top_srcdir = @top_srcdir@
522 ACLOCAL_AMFLAGS = -I sntp/m4 -I sntp/libevent/m4 -I sntp/libopts/m4
525 # moved sntp first to get libtool and libevent built.
545 DISTCHECK_CONFIGURE_FLAGS = -C --with-sntp --enable-local-libevent $(NTP_DCF)
547 $(srcdir)/COPYRIGHT \
557 README.pullrequests \
582 DISTCLEANFILES = .gcc-warning
584 # HMS: Keep .gcc-warning first, as that way it gets printed first.
589 $(srcdir)/COPYRIGHT \
590 $(srcdir)/.checkChangeLog \
594 # HMS: The following seems to be a work-in-progress...
595 CVO = `$(srcdir)/sntp/libevent/build-aux/config.guess`
596 BHOST = `(hostname || uname -n)`
597 all: $(BUILT_SOURCES) config.h
598 $(MAKE) $(AM_MAKEFLAGS) all-recursive
601 am--refresh: Makefile
603 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
605 case '$(am__configure_deps)' in \
607 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
608 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
613 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
614 $(am__cd) $(top_srcdir) && \
615 $(AUTOMAKE) --foreign Makefile
616 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
619 echo ' $(SHELL) ./config.status'; \
620 $(SHELL) ./config.status;; \
622 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
623 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
626 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
627 $(SHELL) ./config.status --recheck
629 $(top_srcdir)/configure: $(am__configure_deps)
630 $(am__cd) $(srcdir) && $(AUTOCONF)
631 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
632 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
633 $(am__aclocal_m4_deps):
636 @test -f $@ || rm -f stamp-h1
637 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
639 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
641 cd $(top_builddir) && $(SHELL) ./config.status config.h
642 $(srcdir)/config.h.in: $(am__configure_deps)
643 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
648 -rm -f config.h stamp-h1
657 -rm -f libtool config.lt
659 # This directory's subdirectories are mostly independent; you can cd
660 # into them and run 'make' without going through this Makefile.
661 # To change the values of 'make' variables: instead of editing Makefiles,
662 # (1) if the variable is set in 'config.status', edit 'config.status'
663 # (which will cause the Makefiles to be regenerated when you run 'make');
664 # (2) otherwise, pass the desired values on the 'make' command line.
665 $(am__recursive_targets):
667 if $(am__make_keepgoing); then \
668 failcom='fail=yes'; \
673 target=`echo $@ | sed s/-recursive//`; \
675 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
676 *) list='$(SUBDIRS)' ;; \
678 for subdir in $$list; do \
679 echo "Making $$target in $$subdir"; \
680 if test "$$subdir" = "."; then \
682 local_target="$$target-am"; \
684 local_target="$$target"; \
686 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
689 if test "$$dot_seen" = "no"; then \
690 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
693 ID: $(am__tagged_files)
694 $(am__define_uniq_tagged_files); mkid -fID $$unique
698 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
701 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
702 include_option=--etags-include; \
705 include_option=--include; \
708 list='$(SUBDIRS)'; for subdir in $$list; do \
709 if test "$$subdir" = .; then :; else \
710 test ! -f $$subdir/TAGS || \
711 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
714 $(am__define_uniq_tagged_files); \
716 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
717 test -n "$$unique" || unique=$$empty_fix; \
718 if test $$# -gt 0; then \
719 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
722 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
726 ctags: ctags-recursive
729 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
730 $(am__define_uniq_tagged_files); \
731 test -z "$(CTAGS_ARGS)$$unique" \
732 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
736 here=`$(am__cd) $(top_builddir) && pwd` \
737 && $(am__cd) $(top_srcdir) \
738 && gtags -i $(GTAGS_ARGS) "$$here"
740 test ! -s cscope.files \
741 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
744 cscope.files: clean-cscope cscopelist
745 cscopelist: cscopelist-recursive
747 cscopelist-am: $(am__tagged_files)
748 list='$(am__tagged_files)'; \
749 case "$(srcdir)" in \
750 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
751 *) sdir=$(subdir)/$(srcdir) ;; \
753 for i in $$list; do \
754 if test -f "$$i"; then \
755 echo "$(subdir)/$$i"; \
759 done >> $(top_builddir)/cscope.files
762 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
763 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
765 distdir: $(DISTFILES)
766 $(am__remove_distdir)
767 test -d "$(distdir)" || mkdir "$(distdir)"
768 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
769 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
770 list='$(DISTFILES)'; \
771 dist_files=`for file in $$list; do echo $$file; done | \
772 sed -e "s|^$$srcdirstrip/||;t" \
773 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
774 case $$dist_files in \
775 */*) $(MKDIR_P) `echo "$$dist_files" | \
776 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
779 for file in $$dist_files; do \
780 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
781 if test -d $$d/$$file; then \
782 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
783 if test -d "$(distdir)/$$file"; then \
784 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
786 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
787 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
788 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
790 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
792 test -f "$(distdir)/$$file" \
793 || cp -p $$d/$$file "$(distdir)/$$file" \
797 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
798 if test "$$subdir" = .; then :; else \
800 || test -d "$(distdir)/$$subdir" \
801 || $(MKDIR_P) "$(distdir)/$$subdir" \
803 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
805 new_distdir=$$reldir; \
806 dir1=$$subdir; dir2="$(top_distdir)"; \
808 new_top_distdir=$$reldir; \
809 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
810 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
811 ($(am__cd) $$subdir && \
812 $(MAKE) $(AM_MAKEFLAGS) \
813 top_distdir="$$new_top_distdir" \
814 distdir="$$new_distdir" \
815 am__remove_distdir=: \
816 am__skip_length_check=: \
817 am__skip_mode_fix=: \
822 $(MAKE) $(AM_MAKEFLAGS) \
823 top_distdir="$(top_distdir)" distdir="$(distdir)" \
825 -test -n "$(am__skip_mode_fix)" \
826 || find "$(distdir)" -type d ! -perm -755 \
827 -exec chmod u+rwx,go+rx {} \; -o \
828 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
829 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
830 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
831 || chmod -R a+r "$(distdir)"
833 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
834 $(am__post_remove_distdir)
837 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
838 $(am__post_remove_distdir)
841 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
842 $(am__post_remove_distdir)
845 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
846 $(am__post_remove_distdir)
849 @echo WARNING: "Support for distribution archives compressed with" \
850 "legacy program 'compress' is deprecated." >&2
851 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
852 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
853 $(am__post_remove_distdir)
856 @echo WARNING: "Support for shar distribution archives is" \
858 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
859 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
860 $(am__post_remove_distdir)
863 -rm -f $(distdir).zip
864 zip -rq $(distdir).zip $(distdir)
865 $(am__post_remove_distdir)
868 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
869 $(am__post_remove_distdir)
871 # This target untars the dist file and tries a VPATH configuration. Then
872 # it guarantees that the distribution is self-contained by making another
875 case '$(DIST_ARCHIVES)' in \
877 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
879 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
881 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
883 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
885 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
887 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
889 unzip $(distdir).zip ;;\
891 chmod -R a-w $(distdir)
893 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
895 test -d $(distdir)/_build || exit 0; \
896 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
897 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
899 && $(am__cd) $(distdir)/_build/sub \
901 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
902 $(DISTCHECK_CONFIGURE_FLAGS) \
903 --srcdir=../.. --prefix="$$dc_install_base" \
904 && $(MAKE) $(AM_MAKEFLAGS) \
905 && $(MAKE) $(AM_MAKEFLAGS) dvi \
906 && $(MAKE) $(AM_MAKEFLAGS) check \
907 && $(MAKE) $(AM_MAKEFLAGS) install \
908 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
909 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
910 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
912 && chmod -R a-w "$$dc_install_base" \
914 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
915 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
916 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
917 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
918 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
919 } || { rm -rf "$$dc_destdir"; exit 1; }) \
920 && rm -rf "$$dc_destdir" \
921 && $(MAKE) $(AM_MAKEFLAGS) dist \
922 && rm -rf $(DIST_ARCHIVES) \
923 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
926 $(am__post_remove_distdir)
927 @(echo "$(distdir) archives ready for distribution: "; \
928 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
929 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
931 @test -n '$(distuninstallcheck_dir)' || { \
932 echo 'ERROR: trying to run $@ with an empty' \
933 '$$(distuninstallcheck_dir)' >&2; \
936 $(am__cd) '$(distuninstallcheck_dir)' || { \
937 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
940 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
941 || { echo "ERROR: files left after uninstall:" ; \
942 if test -n "$(DESTDIR)"; then \
943 echo " (check DESTDIR support)"; \
945 $(distuninstallcheck_listfiles) ; \
947 distcleancheck: distclean
948 @if test '$(srcdir)' = . ; then \
949 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
952 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
953 || { echo "ERROR: files left in build directory after distclean:" ; \
954 $(distcleancheck_listfiles) ; \
957 check: $(BUILT_SOURCES)
958 $(MAKE) $(AM_MAKEFLAGS) check-recursive
959 all-am: Makefile config.h
960 installdirs: installdirs-recursive
962 install: $(BUILT_SOURCES)
963 $(MAKE) $(AM_MAKEFLAGS) install-recursive
964 install-exec: install-exec-recursive
965 install-data: install-data-recursive
966 uninstall: uninstall-recursive
969 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
971 installcheck: installcheck-recursive
973 if test -z '$(STRIP)'; then \
974 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
975 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
978 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
979 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
980 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
985 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
988 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
989 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
990 -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
992 maintainer-clean-generic:
993 @echo "This command is intended for maintainers to use"
994 @echo "it deletes files that may require special tools to rebuild."
995 -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
996 clean: clean-recursive
998 clean-am: clean-generic clean-libtool mostlyclean-am
1000 distclean: distclean-recursive
1001 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1003 distclean-am: clean-am distclean-generic distclean-hdr \
1004 distclean-libtool distclean-tags
1010 html: html-recursive
1014 info: info-recursive
1018 install-data-am: install-data-local
1020 install-dvi: install-dvi-recursive
1026 install-html: install-html-recursive
1030 install-info: install-info-recursive
1036 install-pdf: install-pdf-recursive
1040 install-ps: install-ps-recursive
1046 maintainer-clean: maintainer-clean-recursive
1047 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1048 -rm -rf $(top_srcdir)/autom4te.cache
1050 maintainer-clean-am: distclean-am maintainer-clean-generic
1052 mostlyclean: mostlyclean-recursive
1054 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1064 uninstall-am: uninstall-local
1066 .MAKE: $(am__recursive_targets) all check install install-am \
1069 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1070 am--refresh check check-am clean clean-cscope clean-generic \
1071 clean-libtool cscope cscopelist-am ctags ctags-am dist \
1072 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
1073 dist-tarZ dist-xz dist-zip distcheck distclean \
1074 distclean-generic distclean-hdr distclean-libtool \
1075 distclean-tags distcleancheck distdir distuninstallcheck dvi \
1076 dvi-am html html-am info info-am install install-am \
1077 install-data install-data-am install-data-local install-dvi \
1078 install-dvi-am install-exec install-exec-am install-html \
1079 install-html-am install-info install-info-am install-man \
1080 install-pdf install-pdf-am install-ps install-ps-am \
1081 install-strip installcheck installcheck-am installdirs \
1082 installdirs-am maintainer-clean maintainer-clean-generic \
1083 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
1084 ps ps-am tags tags-am uninstall uninstall-am uninstall-local
1090 @echo "Compiling with GCC now generates lots of new warnings."
1092 @echo "Don't be concerned. They're just warnings."
1094 @echo "Don't send bug reports about the warnings, either."
1096 @echo "Feel free to send patches that fix these warnings, though."
1101 html/.datecheck: FRC.html
1102 cd $(srcdir)/html && \
1103 ../scripts/build/checkHtmlFileDates
1105 libtool: $(LIBTOOL_DEPS)
1106 ./config.status --recheck
1108 sntp/built-sources-only: FRC.sntp
1109 @cd sntp && $(MAKE) $(AM_MAKEFLAGS) built-sources-only
1111 $(srcdir)/COPYRIGHT: $(srcdir)/html/copyright.html
1112 { echo "This file is automatically generated from html/copyright.html" ; \
1113 lynx -dump $(srcdir)/html/copyright.html ;} > COPYRIGHT.new \
1114 && mv -f COPYRIGHT.new $(srcdir)/COPYRIGHT
1116 COPYRIGHT-please: $(srcdir)/COPYRIGHT
1117 @: do-nothing action to prevent default \
1118 This target is needed by sntp/Makefile.am on decrepit \
1119 FreeBSD 6.x make which fails with "make COPYRIGHT" \
1120 configured in $(srcdir) but "make ./COPYRIGHT" succeeds. \
1121 Rather than determine our $(srcdir) from sntp/Makefile.am \
1122 COPYRIGHT-please serves as a fixed target.
1124 $(srcdir)/.checkChangeLog: $(srcdir)/ChangeLog $(srcdir)/scripts/build/checkChangeLog
1126 ./scripts/build/checkChangeLog
1129 @find $(distdir) -type d -name SCCS -print | xargs rm -rf
1132 @echo "Installing stand-alone HTML documentation"
1133 @( cd $(srcdir) && \
1134 for i in `find html -type d | grep -v SCCS` ; \
1135 do $(INSTALL) -d $(DESTDIR)$(htmldir)/$$i ; done )
1136 @( cd $(srcdir) && \
1137 for i in `find html -type f | grep -v SCCS` ; \
1138 do $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; done )
1141 rm -rf $(DESTDIR)$(htmldir)/html
1143 CommitLog: FRC.CommitLog
1145 && $(PATH_TEST) -e CommitLog \
1146 -a SCCS/s.ChangeSet -ot CommitLog \
1147 || scripts/build/genCommitLog
1150 echo "$(CVO)" > .buildcvo
1152 .checkcvo: .buildcvo FRC.checkcvo
1153 @if [ "`cat .buildcvo`" != "$(CVO)" ];then \
1154 echo "This directory was configured for `cat .buildcvo`"; \
1155 echo "but this machine is a $(CVO)"; \
1160 echo "$(BHOST)" > .buildhost
1162 .checkhost: .buildhost FRC.checkhost
1163 @if [ "`cat .buildhost`" != "$(BHOST)" ];then \
1164 echo "Built on `cat .buildhost` but this is $(BHOST)"; \
1168 FRC.CommitLog FRC.checkcvo FRC.checkhost FRC.distwarn FRC.html FRC.sntp:
1169 @: do-nothing action prevents any default
1171 # HMS: what was I trying to do with this?
1172 #dot.emacs: FRC.distwarn
1174 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1175 # Otherwise a system limit (for SysV at least) may be exceeded.