2 * Copyright (c) 1993, 1994
3 * The Regents of the University of California. All rights reserved.
4 * Copyright (c) 1993, 1994, 1995, 1996
5 * Keith Bostic. All rights reserved.
7 * See the LICENSE file for redistribution information.
15 static const char sccsid[] = "@(#)cl_screen.c 10.49 (Berkeley) 9/24/96";
18 #include <sys/types.h>
19 #include <sys/queue.h>
21 #include <bitstring.h>
31 #include "../common/common.h"
34 static int cl_ex_end __P((GS *));
35 static int cl_ex_init __P((SCR *));
36 static void cl_freecap __P((CL_PRIVATE *));
37 static int cl_vi_end __P((GS *));
38 static int cl_vi_init __P((SCR *));
39 static int cl_putenv __P((char *, char *, u_long));
43 * Switch screen types.
45 * PUBLIC: int cl_screen __P((SCR *, u_int32_t));
58 /* See if the current information is incorrect. */
59 if (F_ISSET(gp, G_SRESTART)) {
62 F_CLR(gp, G_SRESTART);
65 /* See if we're already in the right mode. */
66 if (LF_ISSET(SC_EX) && F_ISSET(sp, SC_SCR_EX) ||
67 LF_ISSET(SC_VI) && F_ISSET(sp, SC_SCR_VI))
71 * Fake leaving ex mode.
73 * We don't actually exit ex or vi mode unless forced (e.g. by a window
74 * size change). This is because many curses implementations can't be
75 * called twice in a single program. Plus, it's faster. If the editor
76 * "leaves" vi to enter ex, when it exits ex we'll just fall back into
79 if (F_ISSET(sp, SC_SCR_EX))
83 * Fake leaving vi mode.
85 * Clear out the rest of the screen if we're in the middle of a split
86 * screen. Move to the last line in the current screen -- this makes
87 * terminal scrolling happen naturally. Note: *don't* move past the
88 * end of the screen, as there are ex commands (e.g., :read ! cat file)
89 * that don't want to. Don't clear the info line, its contents may be
90 * valid, e.g. :file|append.
92 if (F_ISSET(sp, SC_SCR_VI)) {
95 if (sp->q.cqe_next != (void *)&gp->dq) {
96 (void)move(RLNO(sp, sp->rows), 0);
99 (void)move(RLNO(sp, sp->rows) - 1, 0);
103 /* Enter the requested mode. */
104 if (LF_ISSET(SC_EX)) {
107 F_SET(clp, CL_IN_EX | CL_SCR_EX_INIT);
110 * If doing an ex screen for ex mode, move to the last line
113 if (F_ISSET(sp, SC_EX) && clp->cup != NULL)
114 tputs(tgoto(clp->cup,
115 0, O_VAL(sp, O_LINES) - 1), 1, cl_putchar);
119 F_CLR(clp, CL_IN_EX);
120 F_SET(clp, CL_SCR_VI_INIT);
127 * Shutdown the screens.
129 * PUBLIC: int cl_quit __P((GS *));
142 * If we weren't really running, ignore it. This happens if the
143 * screen changes size before we've called curses.
145 if (!F_ISSET(clp, CL_SCR_EX_INIT | CL_SCR_VI_INIT))
148 /* Clean up the terminal mappings. */
152 /* Really leave vi mode. */
153 if (F_ISSET(clp, CL_STDIN_TTY) &&
154 F_ISSET(clp, CL_SCR_VI_INIT) && cl_vi_end(gp))
157 /* Really leave ex mode. */
158 if (F_ISSET(clp, CL_STDIN_TTY) &&
159 F_ISSET(clp, CL_SCR_EX_INIT) && cl_ex_end(gp))
163 * If we were running ex when we quit, or we're using an implementation
164 * of curses where endwin() doesn't get this right, restore the original
168 * We always do this because it's too hard to figure out what curses
169 * implementations get it wrong. It may discard type-ahead characters
170 * from the tty queue.
172 (void)tcsetattr(STDIN_FILENO, TCSADRAIN | TCSASOFT, &clp->orig);
174 F_CLR(clp, CL_SCR_EX_INIT | CL_SCR_VI_INIT);
180 * Initialize the curses vi screen.
188 char *o_cols, *o_lines, *o_term, *ttype;
193 /* If already initialized, just set the terminal modes. */
194 if (F_ISSET(clp, CL_SCR_VI_INIT))
197 /* Curses vi always reads from (and writes to) a terminal. */
198 if (!F_ISSET(clp, CL_STDIN_TTY) || !isatty(STDOUT_FILENO)) {
200 "016|Vi's standard input and output must be a terminal");
204 /* We'll need a terminal type. */
205 if (opts_empty(sp, O_TERM, 0))
207 ttype = O_STR(sp, O_TERM);
211 * Changing the row/column and terminal values is done by putting them
212 * into the environment, which is then read by curses. What this loses
213 * in ugliness, it makes up for in stupidity. We can't simply put the
214 * values into the environment ourselves, because in the presence of a
215 * kernel mechanism for returning the window size, entering values into
216 * the environment will screw up future screen resizing events, e.g. if
217 * the user enters a :shell command and then resizes their window. So,
218 * if they weren't already in the environment, we make sure to delete
219 * them immediately after setting them.
222 * Putting the TERM variable into the environment is necessary, even
223 * though we're using newterm() here. We may be using initscr() as
224 * the underlying function.
226 o_term = getenv("TERM");
227 cl_putenv("TERM", ttype, 0);
228 o_lines = getenv("LINES");
229 cl_putenv("LINES", NULL, (u_long)O_VAL(sp, O_LINES));
230 o_cols = getenv("COLUMNS");
231 cl_putenv("COLUMNS", NULL, (u_long)O_VAL(sp, O_COLUMNS));
234 * We don't care about the SCREEN reference returned by newterm, we
235 * never have more than one SCREEN at a time.
238 * The SunOS initscr() can't be called twice. Don't even think about
239 * using it. It fails in subtle ways (e.g. select(2) on fileno(stdin)
240 * stops working). (The SVID notes that applications should only call
244 * The HP/UX newterm doesn't support the NULL first argument, so we
245 * have to specify the terminal type.
248 if (newterm(ttype, stdout, stdin) == NULL) {
250 msgq(sp, M_SYSERR, "%s", ttype);
252 msgq(sp, M_ERR, "%s: unknown terminal type", ttype);
265 * Someone got let out alone without adult supervision -- the SunOS
266 * newterm resets the signal handlers. There's a race, but it's not
269 (void)sig_init(sp->gp, sp);
272 * We use raw mode. What we want is 8-bit clean, however, signals
273 * and flow control should continue to work. Admittedly, it sounds
274 * like cbreak, but it isn't. Using cbreak() can get you additional
275 * things like IEXTEN, which turns on flags like DISCARD and LNEXT.
278 * If raw isn't turning off echo and newlines, something's wrong.
279 * However, it shouldn't hurt.
281 noecho(); /* No character echo. */
282 nonl(); /* No CR/NL translation. */
283 raw(); /* 8-bit clean. */
284 idlok(stdscr, 1); /* Use hardware insert/delete line. */
286 /* Put the cursor keys into application mode. */
287 (void)keypad(stdscr, TRUE);
291 * The screen TI sequence just got sent. See the comment in
292 * cl_funcs.c:cl_attr().
294 clp->ti_te = TI_SENT;
298 * Historic implementations of curses handled SIGTSTP signals
299 * in one of three ways. They either:
301 * 1: Set their own handler, regardless.
302 * 2: Did not set a handler if a handler was already installed.
303 * 3: Set their own handler, but then called any previously set
304 * handler after completing their own cleanup.
306 * We don't try and figure out which behavior is in place, we force
307 * it to SIG_DFL after initializing the curses interface, which means
308 * that curses isn't going to take the signal. Since curses isn't
309 * reentrant (i.e., the whole curses SIGTSTP interface is a fantasy),
310 * we're doing The Right Thing.
312 (void)signal(SIGTSTP, SIG_DFL);
315 * If flow control was on, turn it back on. Turn signals on. ISIG
316 * turns on VINTR, VQUIT, VDSUSP and VSUSP. The main curses code
317 * already installed a handler for VINTR. We're going to disable the
321 * We want to use ^Y as a vi scrolling command. If the user has the
322 * DSUSP character set to ^Y (common practice) clean it up. As it's
323 * equally possible that the user has VDSUSP set to 'a', we disable
324 * it regardless. It doesn't make much sense to suspend vi at read,
325 * so I don't think anyone will care. Alternatively, we could look
326 * it up in the table of legal command characters and turn it off if
327 * it matches one. VDSUSP wasn't in POSIX 1003.1-1990, so we test for
331 * We don't check to see if the user had signals enabled originally.
332 * If they didn't, it's unclear what we're supposed to do here, but
333 * it's also pretty unlikely.
335 if (tcgetattr(STDIN_FILENO, &clp->vi_enter)) {
336 msgq(sp, M_SYSERR, "tcgetattr");
339 if (clp->orig.c_iflag & IXON)
340 clp->vi_enter.c_iflag |= IXON;
341 if (clp->orig.c_iflag & IXOFF)
342 clp->vi_enter.c_iflag |= IXOFF;
344 clp->vi_enter.c_lflag |= ISIG;
346 clp->vi_enter.c_cc[VDSUSP] = _POSIX_VDISABLE;
348 clp->vi_enter.c_cc[VQUIT] = _POSIX_VDISABLE;
349 clp->vi_enter.c_cc[VSUSP] = _POSIX_VDISABLE;
353 * OSF/1 doesn't turn off the <discard>, <literal-next> or <status>
354 * characters when curses switches into raw mode. It should be OK
355 * to do it explicitly for everyone.
358 clp->vi_enter.c_cc[VDISCARD] = _POSIX_VDISABLE;
361 clp->vi_enter.c_cc[VLNEXT] = _POSIX_VDISABLE;
364 clp->vi_enter.c_cc[VSTATUS] = _POSIX_VDISABLE;
367 /* Initialize terminal based information. */
368 if (cl_term_init(sp))
371 fast: /* Set the terminal modes. */
372 if (tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &clp->vi_enter)) {
375 msgq(sp, M_SYSERR, "tcsetattr");
376 err: (void)cl_vi_end(sp->gp);
384 * Shutdown the vi screen.
394 /* Restore the cursor keys to normal mode. */
395 (void)keypad(stdscr, FALSE);
398 * If we were running vi when we quit, scroll the screen up a single
399 * line so we don't lose any information.
401 * Move to the bottom of the window (some endwin implementations don't
404 if (!F_ISSET(clp, CL_IN_EX)) {
407 (void)move(LINES - 1, 0);
413 /* End curses window. */
418 * The screen TE sequence just got sent. See the comment in
419 * cl_funcs.c:cl_attr().
421 clp->ti_te = TE_SENT;
428 * Initialize the ex screen.
438 /* If already initialized, just set the terminal modes. */
439 if (F_ISSET(clp, CL_SCR_EX_INIT))
442 /* If not reading from a file, we're done. */
443 if (!F_ISSET(clp, CL_STDIN_TTY))
446 /* Get the ex termcap/terminfo strings. */
447 (void)cl_getcap(sp, "cup", &clp->cup);
448 (void)cl_getcap(sp, "smso", &clp->smso);
449 (void)cl_getcap(sp, "rmso", &clp->rmso);
450 (void)cl_getcap(sp, "el", &clp->el);
451 (void)cl_getcap(sp, "cuu1", &clp->cuu1);
453 /* Enter_standout_mode and exit_standout_mode are paired. */
454 if (clp->smso == NULL || clp->rmso == NULL) {
455 if (clp->smso != NULL) {
459 if (clp->rmso != NULL) {
466 * Turn on canonical mode, with normal input and output processing.
467 * Start with the original terminal settings as the user probably
468 * had them (including any local extensions) set correctly for the
472 * We can't get everything that we need portably; for example, ONLCR,
473 * mapping <newline> to <carriage-return> on output isn't required
474 * by POSIX 1003.1b-1993. If this turns out to be a problem, then
475 * we'll either have to play some games on the mapping, or we'll have
476 * to make all ex printf's output \r\n instead of \n.
478 clp->ex_enter = clp->orig;
479 clp->ex_enter.c_lflag |= ECHO | ECHOE | ECHOK | ICANON | IEXTEN | ISIG;
481 clp->ex_enter.c_lflag |= ECHOCTL;
484 clp->ex_enter.c_lflag |= ECHOKE;
486 clp->ex_enter.c_iflag |= ICRNL;
487 clp->ex_enter.c_oflag |= OPOST;
489 clp->ex_enter.c_oflag |= ONLCR;
492 fast: if (tcsetattr(STDIN_FILENO, TCSADRAIN | TCSASOFT, &clp->ex_enter)) {
495 msgq(sp, M_SYSERR, "tcsetattr");
503 * Shutdown the ex screen.
520 * Retrieve termcap/terminfo strings.
522 * PUBLIC: int cl_getcap __P((SCR *, char *, char **));
525 cl_getcap(sp, name, elementp)
527 char *name, **elementp;
532 if ((t = tigetstr(name)) != NULL &&
533 t != (char *)-1 && (len = strlen(t)) != 0) {
534 MALLOC_RET(sp, *elementp, char *, len + 1);
535 memmove(*elementp, t, len + 1);
542 * Free any allocated termcap/terminfo strings.
548 if (clp->el != NULL) {
552 if (clp->cup != NULL) {
556 if (clp->cuu1 != NULL) {
560 if (clp->rmso != NULL) {
564 if (clp->smso != NULL) {
572 * Put a value into the environment.
575 cl_putenv(name, str, value)
583 (void)snprintf(buf, sizeof(buf), "%lu", value);
584 return (setenv(name, buf, 1));
586 return (setenv(name, str, 1));