2 * Copyright (c) 1992, 1993, 1994
3 * The Regents of the University of California. All rights reserved.
4 * Copyright (c) 1992, 1993, 1994, 1995, 1996
5 * Keith Bostic. All rights reserved.
7 * See the LICENSE file for redistribution information.
12 #include <sys/types.h>
13 #include <sys/queue.h>
16 #include <bitstring.h>
24 #include "../common/common.h"
27 static int v_exaddr(SCR *, VICMD *, dir_t);
28 static int v_search(SCR *, VICMD *, CHAR_T *, size_t, u_int, dir_t);
31 * v_srch -- [count]?RE[? offset]
32 * Ex address search backward.
34 * PUBLIC: int v_searchb(SCR *, VICMD *);
37 v_searchb(SCR *sp, VICMD *vp)
39 return (v_exaddr(sp, vp, BACKWARD));
43 * v_searchf -- [count]/RE[/ offset]
44 * Ex address search forward.
46 * PUBLIC: int v_searchf(SCR *, VICMD *);
49 v_searchf(SCR *sp, VICMD *vp)
51 return (v_exaddr(sp, vp, FORWARD));
56 * Do a vi search (which is really an ex address).
59 v_exaddr(SCR *sp, VICMD *vp, dir_t dir)
61 static EXCMDLIST fake = { L("search") };
66 size_t len, s_cno, tlen;
75 * If using the search command as a motion, any addressing components
76 * are lost, i.e. y/ptrn/+2, when repeated, is the same as y/ptrn/.
78 if (F_ISSET(vp, VC_ISDOT))
79 return (v_search(sp, vp,
80 NULL, 0, SEARCH_PARSE | SEARCH_MSG | SEARCH_SET, dir));
82 /* Get the search pattern. */
83 if (v_tcmd(sp, vp, dir == BACKWARD ? CH_BSEARCH : CH_FSEARCH,
84 TXT_BS | TXT_CR | TXT_ESCAPE | TXT_PROMPT |
85 (O_ISSET(sp, O_SEARCHINCR) ? TXT_SEARCHINCR : 0)))
88 tp = TAILQ_FIRST(sp->tiq);
90 /* If the user backspaced over the prompt, do nothing. */
91 if (tp->term == TERM_BS)
95 * If the user was doing an incremental search, then we've already
96 * updated the cursor and moved to the right location. Return the
97 * correct values, we're done.
99 if (tp->term == TERM_SEARCH) {
100 vp->m_stop.lno = sp->lno;
101 vp->m_stop.cno = sp->cno;
103 return (v_correct(sp, vp, 0));
104 vp->m_final = vp->m_stop;
109 * If the user entered <escape> or <carriage-return>, the length is
110 * 1 and the right thing will happen, i.e. the prompt will be used
111 * as a command character.
113 * Build a fake ex command structure.
116 gp->excmd.cp = tp->lb;
117 gp->excmd.clen = tp->len;
118 F_INIT(&gp->excmd, E_VISEARCH);
122 * Warn if the search wraps. This is a pretty special case, but it's
123 * nice feature that wasn't in the original implementations of ex/vi.
124 * (It was added at some point to System V's version.) This message
125 * is only displayed if there are no keys in the queue. The problem is
126 * the command is going to succeed, and the message is informational,
127 * not an error. If a macro displays it repeatedly, e.g., the pattern
128 * only occurs once in the file and wrapscan is set, you lose big. For
129 * example, if the macro does something like:
131 * :map K /pattern/^MjK
133 * Each search will display the message, but the following "/pattern/"
134 * will immediately overwrite it, with strange results. The System V
135 * vi displays the "wrapped" message multiple times, but because it's
136 * overwritten each time, it's not as noticeable. As we don't discard
137 * messages, it's a real problem for us.
139 if (!KEYS_WAITING(sp))
140 F_SET(&gp->excmd, E_SEARCH_WMSG);
142 /* Save the current line/column. */
148 * Historically, vi / and ? commands were full-blown ex addresses,
149 * including ';' delimiters, trailing <blank>'s, multiple search
150 * strings (separated by semi-colons) and, finally, full-blown z
151 * commands after the / and ? search strings. (If the search was
152 * being used as a motion, the trailing z command was ignored.
153 * Also, we do some argument checking on the z command, to be sure
154 * that it's not some other random command.) For multiple search
155 * strings, leading <blank>'s at the second and subsequent strings
156 * were eaten as well. This has some (unintended?) side-effects:
157 * the command /ptrn/;3 is legal and results in moving to line 3.
158 * I suppose you could use it to optionally move to line 3...
161 * Historically, if any part of the search command failed, the cursor
162 * remained unmodified (even if ; was used). We have to play games
163 * because the underlying ex parser thinks we're modifying the cursor
164 * as we go, but I think we're compatible with historic practice.
167 * Historically, the command "/STRING/; " failed, apparently it
168 * confused the parser. We're not that compatible.
171 if (ex_range(sp, cmdp, &err))
175 * Remember where any remaining command information is, and clean
176 * up the fake ex command.
185 /* Copy out the new cursor position and make sure it's okay. */
186 switch (cmdp->addrcnt) {
188 vp->m_stop = cmdp->addr1;
191 vp->m_stop = cmdp->addr2;
194 if (!db_exist(sp, vp->m_stop.lno)) {
195 ex_badaddr(sp, &fake,
196 vp->m_stop.lno == 0 ? A_ZERO : A_EOF, NUM_OK);
202 * Historic practice is that a trailing 'z' was ignored if it was a
203 * motion command. Should probably be an error, but not worth the
207 return (v_correct(sp, vp, F_ISSET(cmdp, E_DELTA)));
211 * Historically, if it wasn't a motion command, a delta in the search
212 * pattern turns it into a first nonblank movement.
214 nb = F_ISSET(cmdp, E_DELTA);
216 /* Check for the 'z' command. */
221 /* No blanks, just like the z command. */
222 for (t = cmd + 1, tlen = len - 1; tlen > 0; ++t, --tlen)
226 (*t == '-' || *t == '.' || *t == '+' || *t == '^')) {
235 /* The z command will do the nonblank for us. */
240 v_event_push(sp, NULL, L("+"), 1, CH_NOMAP | CH_QUOTED))
243 /* Push the user's command. */
244 if (v_event_push(sp, NULL, cmd, len, CH_NOMAP | CH_QUOTED))
247 /* Push line number so get correct z display. */
249 sizeof(buf), "%lu", (u_long)vp->m_stop.lno);
250 CHAR2INT(sp, buf, tlen, w, wlen);
251 if (v_event_push(sp, NULL, w, wlen, CH_NOMAP | CH_QUOTED))
254 /* Don't refresh until after 'z' happens. */
255 F_SET(VIP(sp), VIP_S_REFRESH);
258 /* Non-motion commands move to the end of the range. */
259 vp->m_final = vp->m_stop;
261 F_CLR(vp, VM_RCM_MASK);
262 F_SET(vp, VM_RCM_SETFNB);
266 err1: msgq(sp, M_ERR,
267 "188|Characters after search string, line offset and/or z command");
268 err2: vp->m_final.lno = s_lno;
269 vp->m_final.cno = s_cno;
275 * Reverse last search.
277 * PUBLIC: int v_searchN(SCR *, VICMD *);
280 v_searchN(SCR *sp, VICMD *vp)
284 switch (sp->searchdir) {
295 return (v_search(sp, vp, NULL, 0, SEARCH_PARSE, dir));
300 * Repeat last search.
302 * PUBLIC: int v_searchn(SCR *, VICMD *);
305 v_searchn(SCR *sp, VICMD *vp)
307 return (v_search(sp, vp, NULL, 0, SEARCH_PARSE, sp->searchdir));
312 * Test if the character is special in a basic RE.
319 * `*' and `$' are ordinary when appear at the beginning of a RE,
320 * but it's safe to distinguish them from the ordinary characters.
321 * The tilde is vi-specific, of course.
323 return (STRCHR(L(".[*\\^$~"), c) && c);
327 * Rear delimiter for word search when the keyword ends in
328 * (i.e., consists of) a non-word character. See v_searchw below.
330 #define RE_NWSTOP L("([^[:alnum:]_]|$)")
331 #define RE_NWSTOP_LEN (SIZE(RE_NWSTOP) - 1)
334 * v_searchw -- [count]^A
335 * Search for the word under the cursor.
337 * PUBLIC: int v_searchw(SCR *, VICMD *);
340 v_searchw(SCR *sp, VICMD *vp)
346 /* An upper bound for the SIZE of the RE under construction. */
347 len = VIP(sp)->klen + MAX(RE_WSTART_LEN, 1)
348 + MAX(RE_WSTOP_LEN, RE_NWSTOP_LEN);
349 GET_SPACE_RETW(sp, bp, blen, len);
352 /* Only the first character can be non-word, see v_curword. */
353 if (inword(VIP(sp)->keyw[0])) {
354 MEMCPY(p, RE_WSTART, RE_WSTART_LEN);
356 } else if (is_special(VIP(sp)->keyw[0])) {
357 MEMCPY(p, L("\\"), 1);
361 MEMCPY(p, VIP(sp)->keyw, VIP(sp)->klen);
365 MEMCPY(p, RE_WSTOP, RE_WSTOP_LEN);
369 * The keyword is a single non-word character.
370 * We want it to stay the same when typing ^A several times
371 * in a row, just the way the other cases behave.
373 MEMCPY(p, RE_NWSTOP, RE_NWSTOP_LEN);
378 rval = v_search(sp, vp, bp, len, SEARCH_SET, FORWARD);
380 FREE_SPACEW(sp, bp, blen);
386 * The search commands.
389 v_search(SCR *sp, VICMD *vp, CHAR_T *ptrn, size_t plen, u_int flags, dir_t dir)
391 /* Display messages. */
394 /* If it's a motion search, offset past end-of-line is okay. */
400 * Warn if the search wraps. See the comment above, in v_exaddr().
402 if (!KEYS_WAITING(sp))
408 &vp->m_start, &vp->m_stop, ptrn, plen, NULL, flags))
413 &vp->m_start, &vp->m_stop, ptrn, plen, NULL, flags))
417 msgq(sp, M_ERR, "189|No previous search pattern");
423 /* Correct motion commands, otherwise, simply move to the location. */
425 if (v_correct(sp, vp, 0))
428 vp->m_final = vp->m_stop;
434 * Handle command with a search as the motion.
437 * Historically, commands didn't affect the line searched to/from if the
438 * motion command was a search and the final position was the start/end
439 * of the line. There were some special cases and vi was not consistent;
440 * it was fairly easy to confuse it. For example, given the two lines:
445 * placing the cursor on the 'A' and doing y?$ would so confuse it that 'h'
446 * 'k' and put would no longer work correctly. In any case, we try to do
447 * the right thing, but it's not going to exactly match historic practice.
449 * PUBLIC: int v_correct(SCR *, VICMD *, int);
452 v_correct(SCR *sp, VICMD *vp, int isdelta)
460 * We may have wrapped if wrapscan was set, and we may have returned
461 * to the position where the cursor started. Historic vi didn't cope
462 * with this well. Yank wouldn't beep, but the first put after the
463 * yank would move the cursor right one column (without adding any
464 * text) and the second would put a copy of the current line. The
465 * change and delete commands would beep, but would leave the cursor
466 * on the colon command line. I believe that there are macros that
467 * depend on delete, at least, failing. For now, commands that use
468 * search as a motion component fail when the search returns to the
469 * original cursor position.
471 if (vp->m_start.lno == vp->m_stop.lno &&
472 vp->m_start.cno == vp->m_stop.cno) {
473 msgq(sp, M_BERR, "190|Search wrapped to original position");
479 * Searches become line mode operations if there was a delta specified
480 * to the search pattern.
486 * If the motion is in the reverse direction, switch the start and
487 * stop MARK's so that it's in a forward direction. (There's no
488 * reason for this other than to make the tests below easier. The
489 * code in vi.c:vi() would have done the switch.) Both forward
490 * and backward motions can happen for any kind of search command
491 * because of the wrapscan option.
493 if (vp->m_start.lno > vp->m_stop.lno ||
494 (vp->m_start.lno == vp->m_stop.lno &&
495 vp->m_start.cno > vp->m_stop.cno)) {
497 vp->m_start = vp->m_stop;
505 * Delete and yank commands move to the end of the range.
509 * Delete and yank commands don't move. Ignore others.
511 vp->m_final = vp->m_start;
515 * Delta'd searches don't correct based on column positions.
522 * Backward searches starting at column 0, and forward searches ending
523 * at column 0 are corrected to the last column of the previous line.
524 * Otherwise, adjust the starting/ending point to the character before
525 * the current one (this is safe because we know the search had to move
528 * Searches become line mode operations if they start at the first
529 * nonblank and end at column 0 of another line.
531 if (vp->m_start.lno < vp->m_stop.lno && vp->m_stop.cno == 0) {
532 if (db_get(sp, --vp->m_stop.lno, DBG_FATAL, NULL, &len))
534 vp->m_stop.cno = len ? len - 1 : 0;
536 if (nonblank(sp, vp->m_start.lno, &len))
538 if (vp->m_start.cno <= len)