1 # Makefile.in generated by automake 1.15 from Makefile.am.
4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 if test -z '$(MAKELEVEL)'; then \
20 elif test -n '$(MAKE_HOST)'; then \
22 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
28 am__make_running_with_option = \
29 case $${target_option-} in \
31 *) echo "am__make_running_with_option: internal error: invalid" \
32 "target option '$${target_option-}' specified" >&2; \
36 sane_makeflags=$$MAKEFLAGS; \
37 if $(am__is_gnu_make); then \
38 sane_makeflags=$$MFLAGS; \
43 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
44 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
50 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52 for flg in $$sane_makeflags; do \
53 test $$skip_next = yes && { skip_next=no; continue; }; \
56 -*I) strip_trailopt 'I'; skip_next=yes;; \
57 -*I?*) strip_trailopt 'I';; \
58 -*O) strip_trailopt 'O'; skip_next=yes;; \
59 -*O?*) strip_trailopt 'O';; \
60 -*l) strip_trailopt 'l'; skip_next=yes;; \
61 -*l?*) strip_trailopt 'l';; \
62 -[dEDm]) skip_next=yes;; \
63 -[JT]) skip_next=yes;; \
66 *$$target_option*) has_opt=yes; break;; \
70 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
71 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
72 pkgdatadir = $(datadir)/@PACKAGE@
73 pkgincludedir = $(includedir)/@PACKAGE@
74 pkglibdir = $(libdir)/@PACKAGE@
75 pkglibexecdir = $(libexecdir)/@PACKAGE@
76 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
77 install_sh_DATA = $(install_sh) -c -m 644
78 install_sh_PROGRAM = $(install_sh) -c
79 install_sh_SCRIPT = $(install_sh) -c
80 INSTALL_HEADER = $(INSTALL_DATA)
81 transform = $(program_transform_name)
88 build_triplet = @build@
91 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
92 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
93 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
94 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
95 $(top_srcdir)/configure.ac
96 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
98 DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
99 mkinstalldirs = $(install_sh) -d
100 CONFIG_HEADER = $(top_builddir)/config/config.h
102 CONFIG_CLEAN_VPATH_FILES =
103 AM_V_P = $(am__v_P_@AM_V@)
104 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
107 AM_V_GEN = $(am__v_GEN_@AM_V@)
108 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
109 am__v_GEN_0 = @echo " GEN " $@;
111 AM_V_at = $(am__v_at_@AM_V@)
112 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
117 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
118 ctags-recursive dvi-recursive html-recursive info-recursive \
119 install-data-recursive install-dvi-recursive \
120 install-exec-recursive install-html-recursive \
121 install-info-recursive install-pdf-recursive \
122 install-ps-recursive install-recursive installcheck-recursive \
123 installdirs-recursive pdf-recursive ps-recursive \
124 tags-recursive uninstall-recursive
125 am__can_run_installinfo = \
126 case $$AM_UPDATE_INFO_DIR in \
128 *) (install-info --version) >/dev/null 2>&1;; \
130 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
131 distclean-recursive maintainer-clean-recursive
132 am__recursive_targets = \
133 $(RECURSIVE_TARGETS) \
134 $(RECURSIVE_CLEAN_TARGETS) \
135 $(am__extra_recursive_targets)
136 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
138 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
139 # Read a list of newline-separated strings from the standard input,
140 # and print each of them once, without duplicates. Input order is
142 am__uniquify_input = $(AWK) '\
143 BEGIN { nonempty = 0; } \
144 { items[$$0] = 1; nonempty = 1; } \
145 END { if (nonempty) { for (i in items) print i; }; } \
147 # Make sure the list of sources is unique. This is necessary because,
148 # e.g., the same source file might be shared among _SOURCES variables
149 # for different programs/libraries.
150 am__define_uniq_tagged_files = \
151 list='$(am__tagged_files)'; \
152 unique=`for i in $$list; do \
153 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
154 done | $(am__uniquify_input)`
157 DIST_SUBDIRS = $(SUBDIRS)
158 am__DIST_COMMON = $(srcdir)/Makefile.in
159 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
162 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
163 sed_rest='s,^[^/]*/*,,'; \
164 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
165 sed_butlast='s,/*[^/]*$$,,'; \
166 while test -n "$$dir1"; do \
167 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
168 if test "$$first" != "."; then \
169 if test "$$first" = ".."; then \
170 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
171 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
173 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
174 if test "$$first2" = "$$first"; then \
175 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
179 dir0="$$dir0"/"$$first"; \
182 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
187 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
189 AUTOCONF = @AUTOCONF@
190 AUTOHEADER = @AUTOHEADER@
191 AUTOMAKE = @AUTOMAKE@
194 CCDEPMODE = @CCDEPMODE@
197 CPPFLAGS = @CPPFLAGS@
198 CYGPATH_W = @CYGPATH_W@
202 DSYMUTIL = @DSYMUTIL@
212 INSTALL_DATA = @INSTALL_DATA@
213 INSTALL_PROGRAM = @INSTALL_PROGRAM@
214 INSTALL_SCRIPT = @INSTALL_SCRIPT@
215 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
220 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
226 LTLIBOBJS = @LTLIBOBJS@
227 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
229 MAKEINFO = @MAKEINFO@
230 MANIFEST_TOOL = @MANIFEST_TOOL@
240 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
241 PACKAGE_NAME = @PACKAGE_NAME@
242 PACKAGE_STRING = @PACKAGE_STRING@
243 PACKAGE_TARNAME = @PACKAGE_TARNAME@
244 PACKAGE_URL = @PACKAGE_URL@
245 PACKAGE_VERSION = @PACKAGE_VERSION@
246 PATH_SEPARATOR = @PATH_SEPARATOR@
249 SET_MAKE = @SET_MAKE@
255 abs_builddir = @abs_builddir@
256 abs_srcdir = @abs_srcdir@
257 abs_top_builddir = @abs_top_builddir@
258 abs_top_srcdir = @abs_top_srcdir@
259 ac_ct_AR = @ac_ct_AR@
260 ac_ct_CC = @ac_ct_CC@
261 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
262 am__include = @am__include@
263 am__leading_dot = @am__leading_dot@
264 am__quote = @am__quote@
266 am__untar = @am__untar@
269 build_alias = @build_alias@
270 build_cpu = @build_cpu@
271 build_os = @build_os@
272 build_vendor = @build_vendor@
273 builddir = @builddir@
275 datarootdir = @datarootdir@
278 exec_prefix = @exec_prefix@
280 host_alias = @host_alias@
281 host_cpu = @host_cpu@
283 host_vendor = @host_vendor@
285 includedir = @includedir@
287 install_sh = @install_sh@
289 libexecdir = @libexecdir@
290 localedir = @localedir@
291 localstatedir = @localstatedir@
294 oldincludedir = @oldincludedir@
297 program_transform_name = @program_transform_name@
300 sharedstatedir = @sharedstatedir@
302 sysconfdir = @sysconfdir@
303 target_alias = @target_alias@
304 top_build_prefix = @top_build_prefix@
305 top_builddir = @top_builddir@
306 top_srcdir = @top_srcdir@
313 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
315 case '$(am__configure_deps)' in \
317 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
318 && { if test -f $@; then exit 0; else break; fi; }; \
322 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/Makefile'; \
323 $(am__cd) $(top_srcdir) && \
324 $(AUTOMAKE) --foreign modules/Makefile
325 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
328 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
330 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
331 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
334 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
335 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
337 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
338 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
339 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
340 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
341 $(am__aclocal_m4_deps):
349 # This directory's subdirectories are mostly independent; you can cd
350 # into them and run 'make' without going through this Makefile.
351 # To change the values of 'make' variables: instead of editing Makefiles,
352 # (1) if the variable is set in 'config.status', edit 'config.status'
353 # (which will cause the Makefiles to be regenerated when you run 'make');
354 # (2) otherwise, pass the desired values on the 'make' command line.
355 $(am__recursive_targets):
357 if $(am__make_keepgoing); then \
358 failcom='fail=yes'; \
363 target=`echo $@ | sed s/-recursive//`; \
365 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
366 *) list='$(SUBDIRS)' ;; \
368 for subdir in $$list; do \
369 echo "Making $$target in $$subdir"; \
370 if test "$$subdir" = "."; then \
372 local_target="$$target-am"; \
374 local_target="$$target"; \
376 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
379 if test "$$dot_seen" = "no"; then \
380 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
383 ID: $(am__tagged_files)
384 $(am__define_uniq_tagged_files); mkid -fID $$unique
388 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
391 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
392 include_option=--etags-include; \
395 include_option=--include; \
398 list='$(SUBDIRS)'; for subdir in $$list; do \
399 if test "$$subdir" = .; then :; else \
400 test ! -f $$subdir/TAGS || \
401 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
404 $(am__define_uniq_tagged_files); \
406 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
407 test -n "$$unique" || unique=$$empty_fix; \
408 if test $$# -gt 0; then \
409 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
412 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
416 ctags: ctags-recursive
419 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
420 $(am__define_uniq_tagged_files); \
421 test -z "$(CTAGS_ARGS)$$unique" \
422 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
426 here=`$(am__cd) $(top_builddir) && pwd` \
427 && $(am__cd) $(top_srcdir) \
428 && gtags -i $(GTAGS_ARGS) "$$here"
429 cscopelist: cscopelist-recursive
431 cscopelist-am: $(am__tagged_files)
432 list='$(am__tagged_files)'; \
433 case "$(srcdir)" in \
434 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
435 *) sdir=$(subdir)/$(srcdir) ;; \
437 for i in $$list; do \
438 if test -f "$$i"; then \
439 echo "$(subdir)/$$i"; \
443 done >> $(top_builddir)/cscope.files
446 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
448 distdir: $(DISTFILES)
449 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
450 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
451 list='$(DISTFILES)'; \
452 dist_files=`for file in $$list; do echo $$file; done | \
453 sed -e "s|^$$srcdirstrip/||;t" \
454 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
455 case $$dist_files in \
456 */*) $(MKDIR_P) `echo "$$dist_files" | \
457 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
460 for file in $$dist_files; do \
461 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
462 if test -d $$d/$$file; then \
463 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
464 if test -d "$(distdir)/$$file"; then \
465 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
467 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
468 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
469 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
471 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
473 test -f "$(distdir)/$$file" \
474 || cp -p $$d/$$file "$(distdir)/$$file" \
478 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
479 if test "$$subdir" = .; then :; else \
481 || test -d "$(distdir)/$$subdir" \
482 || $(MKDIR_P) "$(distdir)/$$subdir" \
484 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
486 new_distdir=$$reldir; \
487 dir1=$$subdir; dir2="$(top_distdir)"; \
489 new_top_distdir=$$reldir; \
490 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
491 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
492 ($(am__cd) $$subdir && \
493 $(MAKE) $(AM_MAKEFLAGS) \
494 top_distdir="$$new_top_distdir" \
495 distdir="$$new_distdir" \
496 am__remove_distdir=: \
497 am__skip_length_check=: \
498 am__skip_mode_fix=: \
504 check: check-recursive
506 installdirs: installdirs-recursive
508 install: install-recursive
509 install-exec: install-exec-recursive
510 install-data: install-data-recursive
511 uninstall: uninstall-recursive
514 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
516 installcheck: installcheck-recursive
518 if test -z '$(STRIP)'; then \
519 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
520 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
523 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
524 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
525 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
532 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
533 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
535 maintainer-clean-generic:
536 @echo "This command is intended for maintainers to use"
537 @echo "it deletes files that may require special tools to rebuild."
538 clean: clean-recursive
540 clean-am: clean-generic clean-libtool mostlyclean-am
542 distclean: distclean-recursive
544 distclean-am: clean-am distclean-generic distclean-tags
560 install-dvi: install-dvi-recursive
566 install-html: install-html-recursive
570 install-info: install-info-recursive
576 install-pdf: install-pdf-recursive
580 install-ps: install-ps-recursive
586 maintainer-clean: maintainer-clean-recursive
588 maintainer-clean-am: distclean-am maintainer-clean-generic
590 mostlyclean: mostlyclean-recursive
592 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
604 .MAKE: $(am__recursive_targets) install-am install-strip
606 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
607 check-am clean clean-generic clean-libtool cscopelist-am ctags \
608 ctags-am distclean distclean-generic distclean-libtool \
609 distclean-tags distdir dvi dvi-am html html-am info info-am \
610 install install-am install-data install-data-am install-dvi \
611 install-dvi-am install-exec install-exec-am install-html \
612 install-html-am install-info install-info-am install-man \
613 install-pdf install-pdf-am install-ps install-ps-am \
614 install-strip installcheck installcheck-am installdirs \
615 installdirs-am maintainer-clean maintainer-clean-generic \
616 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
617 ps ps-am tags tags-am uninstall uninstall-am
622 # Tell versions [3.59,3.63) of GNU make to not export all variables.
623 # Otherwise a system limit (for SysV at least) may be exceeded.