contrib/openresolv/resolvconf.in

   1 #!/bin/sh
   2 # Copyright (c) 2007-2019 Roy Marples
   3 # All rights reserved
   4
   5 # Redistribution and use in source and binary forms, with or without
   6 # modification, are permitted provided that the following conditions
   7 # are met:
   8 #     * Redistributions of source code must retain the above copyright
   9 #       notice, this list of conditions and the following disclaimer.
  10 #     * Redistributions in binary form must reproduce the above
  11 #       copyright notice, this list of conditions and the following
  12 #       disclaimer in the documentation and/or other materials provided
  13 #       with the distribution.
  14 #
  15 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  16 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  17 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  18 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  19 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  20 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  21 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  22 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  23 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  24 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  25 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  26
  27 RESOLVCONF="$0"
  28 OPENRESOLV_VERSION="3.9.2"
  29 SYSCONFDIR=@SYSCONFDIR@
  30 LIBEXECDIR=@LIBEXECDIR@
  31 VARDIR=@VARDIR@
  32 RCDIR=@RCDIR@
  33 RESTARTCMD=@RESTARTCMD@
  34
  35 if [ "$1" = "--version" ]; then
  36         echo "openresolv $OPENRESOLV_VERSION"
  37         echo "Copyright (c) 2007-2016 Roy Marples"
  38         exit 0
  39 fi
  40
  41 # Disregard dhcpcd setting
  42 unset interface_order state_dir
  43
  44 # If you change this, change the test in VFLAG and libc.in as well
  45 local_nameservers="127.* 0.0.0.0 255.255.255.255 ::1"
  46
  47 dynamic_order="tap[0-9]* tun[0-9]* vpn vpn[0-9]* ppp[0-9]* ippp[0-9]*"
  48 interface_order="lo lo[0-9]*"
  49 name_server_blacklist="0.0.0.0"
  50
  51 # Support original resolvconf configuration layout
  52 # as well as the openresolv config file
  53 if [ -f "$SYSCONFDIR"/resolvconf.conf ]; then
  54         . "$SYSCONFDIR"/resolvconf.conf
  55         [ -n "$state_dir" ] && VARDIR="$state_dir"
  56 elif [ -d "$SYSCONFDIR/resolvconf" ]; then
  57         SYSCONFDIR="$SYSCONFDIR/resolvconf"
  58         if [ -f "$SYSCONFDIR"/interface-order ]; then
  59                 interface_order="$(cat "$SYSCONFDIR"/interface-order)"
  60         fi
  61 fi
  62 IFACEDIR="$VARDIR/interfaces"
  63 METRICDIR="$VARDIR/metrics"
  64 PRIVATEDIR="$VARDIR/private"
  65 EXCLUSIVEDIR="$VARDIR/exclusive"
  66 LOCKDIR="$VARDIR/lock"
  67 _PWD="$PWD"
  68
  69 warn()
  70 {
  71         echo "$*" >&2
  72 }
  73
  74 error_exit()
  75 {
  76         echo "$*" >&2
  77         exit 1
  78 }
  79
  80 usage()
  81 {
  82         cat <<-EOF
  83         Usage: ${RESOLVCONF##*/} [options] command [argument]
  84
  85         Inform the system about any DNS updates.
  86
  87         Commands:
  88           -a \$INTERFACE    Add DNS information to the specified interface
  89                            (DNS supplied via stdin in resolv.conf format)
  90           -d \$INTERFACE    Delete DNS information from the specified interface
  91           -h               Show this help cruft
  92           -i [\$PATTERN]    Show interfaces that have supplied DNS information
  93                    optionally from interfaces that match the specified
  94                    pattern
  95           -l [\$PATTERN]    Show DNS information, optionally from interfaces
  96                            that match the specified pattern
  97
  98           -u               Run updates from our current DNS information
  99           --version        Echo the ${RESOLVCONF##*/} version
 100
 101         Options:
 102           -f               Ignore non existent interfaces
 103           -m metric        Give the added DNS information a metric
 104           -p               Mark the interface as private
 105           -x               Mark the interface as exclusive
 106
 107         Subscriber and System Init Commands:
 108           -I               Init the state dir
 109           -r \$SERVICE      Restart the system service
 110                            (restarting a non-existent or non-running service
 111                             should have no output and return 0)
 112           -R               Show the system service restart command
 113           -v [\$PATTERN]    echo NEWDOMAIN, NEWSEARCH and NEWNS variables to
 114                            the console
 115           -V [\$PATTERN]    Same as -v, but only uses configuration in
 116                            $SYSCONFDIR/resolvconf.conf
 117         EOF
 118         [ -z "$1" ] && exit 0
 119         echo
 120         error_exit "$*"
 121 }
 122
 123 # Strip any trailing dot from each name as a FQDN does not belong
 124 # in resolv.conf(5)
 125 # If you think otherwise, capture a DNS trace and you'll see libc
 126 # will strip it regardless.
 127 # This also solves setting up duplicate zones in our subscribers.
 128 # Also strip any comments denoted by #.
 129 resolv_strip()
 130 {
 131         space=
 132         for word; do
 133                 case "$word" in
 134                 \#*) break;;
 135                 esac
 136                 printf "%s%s" "$space${word%.}"
 137                 space=" "
 138         done
 139         printf "\n"
 140 }
 141
 142 private_iface()
 143 {
 144         # Allow expansion
 145         cd "$IFACEDIR"
 146
 147         # Public interfaces override private ones.
 148         for p in $public_interfaces; do
 149                 case "$iface" in
 150                 "$p"|"$p":*) return 1;;
 151                 esac
 152         done
 153
 154         if [ -e "$PRIVATEDIR/$iface" ]; then
 155                 return 0
 156         fi
 157
 158         for p in $private_interfaces; do
 159                 case "$iface" in
 160                 "$p"|"$p":*) return 0;;
 161                 esac
 162         done
 163
 164         # Not a private interface
 165         return 1
 166 }
 167
 168 # Parse resolv.conf's and make variables
 169 # for domain name servers, search name servers and global nameservers
 170 parse_resolv()
 171 {
 172         domain=
 173         new=true
 174         newns=
 175         ns=
 176         private=false
 177         search=
 178
 179         while read -r line; do
 180                 stripped_line="$(resolv_strip ${line#* })"
 181                 case "$line" in
 182                 "# resolv.conf from "*)
 183                         if ${new}; then
 184                                 iface="${line#\# resolv.conf from *}"
 185                                 new=false
 186                                 if private_iface "$iface"; then
 187                                         private=true
 188                                 else
 189                                         private=false
 190                                 fi
 191                         fi
 192                         ;;
 193                 "nameserver "*)
 194                         islocal=false
 195                         for l in $local_nameservers; do
 196                                 case "$stripped_line" in
 197                                 $l)
 198                                         islocal=true
 199                                         break
 200                                         ;;
 201                                 esac
 202                         done
 203                         if $islocal; then
 204                                 echo "LOCALNAMESERVERS=\"\$LOCALNAMESERVERS $stripped_line\""
 205                         else
 206                                 ns="$ns$stripped_line "
 207                         fi
 208                         ;;
 209                 "domain "*)
 210                         search="$stripped_line"
 211                         if [ -z "$domain" ]; then
 212                                 domain="$search"
 213                                 echo "DOMAIN=\"$domain\""
 214                         fi
 215                         ;;
 216                 "search "*)
 217                         search="$stripped_line"
 218                         ;;
 219                 *)
 220                         [ -n "$line" ] && continue
 221                         if [ -n "$ns" ] && [ -n "$search" ]; then
 222                                 newns=
 223                                 for n in $ns; do
 224                                         newns="$newns${newns:+,}$n"
 225                                 done
 226                                 ds=
 227                                 for d in $search; do
 228                                         ds="$ds${ds:+ }$d:$newns"
 229                                 done
 230                                 echo "DOMAINS=\"\$DOMAINS $ds\""
 231                         fi
 232                         echo "SEARCH=\"\$SEARCH $search\""
 233                         if ! $private; then
 234                                 echo "NAMESERVERS=\"\$NAMESERVERS $ns\""
 235                         fi
 236                         ns=
 237                         search=
 238                         new=true
 239                         ;;
 240                 esac
 241         done
 242 }
 243
 244 uniqify()
 245 {
 246         result=
 247         while [ -n "$1" ]; do
 248                 case " $result " in
 249                 *" $1 "*);;
 250                 *) result="$result $1";;
 251                 esac
 252                 shift
 253         done
 254         echo "${result# *}"
 255 }
 256
 257 dirname()
 258 {
 259         OIFS="$IFS"
 260         IFS=/
 261         set -- $@
 262         IFS="$OIFS"
 263         if [ -n "$1" ]; then
 264                 printf %s .
 265         else
 266                 shift
 267         fi
 268         while [ -n "$2" ]; do
 269                 printf "/%s" "$1"
 270                 shift
 271         done
 272         printf "\n"
 273 }
 274
 275 config_mkdirs()
 276 {
 277         e=0
 278         for f; do
 279                 [ -n "$f" ] || continue
 280                 d="$(dirname "$f")"
 281                 if [ ! -d "$d" ]; then
 282                         if type install >/dev/null 2>&1; then
 283                                 install -d "$d" || e=$?
 284                         else
 285                                 mkdir "$d" || e=$?
 286                         fi
 287                 fi
 288         done
 289         return $e
 290 }
 291
 292 # With the advent of alternative init systems, it's possible to have
 293 # more than one installed. So we need to try and guess what one we're
 294 # using unless overriden by configure.
 295 # Note that restarting a service is a last resort - the subscribers
 296 # should make a reasonable attempt to reconfigre the service via some
 297 # method, normally SIGHUP.
 298 detect_init()
 299 {
 300         [ -n "$RESTARTCMD" ] && return 0
 301
 302         # Detect the running init system.
 303         # As systemd and OpenRC can be installed on top of legacy init
 304         # systems we try to detect them first.
 305         status="@STATUSARG@"
 306         : ${status:=status}
 307         if [ -x /bin/systemctl ] && [ -S /run/systemd/private ]; then
 308                 RESTARTCMD='
 309                         if /bin/systemctl --quiet is-active $1.service
 310                         then
 311                                 /bin/systemctl restart $1.service
 312                         fi'
 313         elif [ -x /usr/bin/systemctl ] && [ -S /run/systemd/private ]; then
 314                 RESTARTCMD='
 315                         if /usr/bin/systemctl --quiet is-active $1.service
 316                         then
 317                                 /usr/bin/systemctl restart $1.service
 318                         fi'
 319         elif [ -x /sbin/rc-service ] &&
 320              { [ -s /libexec/rc/init.d/softlevel ] ||
 321              [ -s /run/openrc/softlevel ]; }
 322         then
 323                 RESTARTCMD='/sbin/rc-service -i $1 -- -Ds restart'
 324         elif [ -x /usr/sbin/invoke-rc.d ]; then
 325                 RCDIR=/etc/init.d
 326                 RESTARTCMD='
 327                    if /usr/sbin/invoke-rc.d --quiet $1 status >/dev/null 2>&1
 328                    then
 329                         /usr/sbin/invoke-rc.d $1 restart
 330                    fi'
 331         elif [ -x /sbin/service ]; then
 332                 # Old RedHat
 333                 RCDIR=/etc/init.d
 334                 RESTARTCMD='
 335                         if /sbin/service $1; then
 336                                 /sbin/service $1 restart
 337                         fi'
 338         elif [ -x /usr/sbin/service ]; then
 339                 # Could be FreeBSD
 340                 RESTARTCMD="
 341                         if /usr/sbin/service \$1 $status >/dev/null 2>&1
 342                         then
 343                                 /usr/sbin/service \$1 restart
 344                         fi"
 345         elif [ -x /bin/sv ]; then
 346                 RESTARTCMD='/bin/sv status $1 >/dev/null 2>&1 &&
 347                             /bin/sv try-restart $1'
 348         elif [ -x /usr/bin/sv ]; then
 349                 RESTARTCMD='/usr/bin/sv status $1 >/dev/null 2>&1 &&
 350                             /usr/bin/sv try-restart $1'
 351         elif [ -e /etc/arch-release ] && [ -d /etc/rc.d ]; then
 352                 RCDIR=/etc/rc.d
 353                 RESTARTCMD='
 354                         if [ -e /var/run/daemons/$1 ]
 355                         then
 356                                 /etc/rc.d/$1 restart
 357                         fi'
 358         elif [ -e /etc/slackware-version ] && [ -d /etc/rc.d ]; then
 359                 RESTARTCMD='
 360                         if /etc/rc.d/rc.$1 status >/dev/null 2>&1
 361                         then
 362                                 /etc/rc.d/rc.$1 restart
 363                         fi'
 364         elif [ -e /etc/rc.d/rc.subr ] && [ -d /etc/rc.d ]; then
 365                 # OpenBSD
 366                 RESTARTCMD='
 367                         if /etc/rc.d/$1 check >/dev/null 2>&1
 368                         then
 369                                 /etc/rc.d/$1 restart
 370                         fi'
 371         else
 372                 for x in /etc/init.d/rc.d /etc/rc.d /etc/init.d; do
 373                         [ -d $x ] || continue
 374                         RESTARTCMD="
 375                                 if $x/\$1 $status >/dev/null 2>&1
 376                                 then
 377                                         $x/\$1 restart
 378                                 fi"
 379                         break
 380                 done
 381         fi
 382
 383         if [ -z "$RESTARTCMD" ]; then
 384                 if [ "$_NOINIT_WARNED" != true ]; then
 385                         warn "could not detect a useable init system"
 386                         _NOINIT_WARNED=true
 387                 fi
 388                 return 1
 389         fi
 390         _NOINIT_WARNED=
 391         return 0
 392 }
 393
 394 echo_resolv()
 395 {
 396         OIFS="$IFS"
 397
 398         [ -n "$1" ] && [ -f "$IFACEDIR/$1" ] || return 1
 399         echo "# resolv.conf from $1"
 400         # Our variable maker works of the fact each resolv.conf per interface
 401         # is separated by blank lines.
 402         # So we remove them when echoing them.
 403         while read -r line; do
 404                 IFS="$OIFS"
 405                 if [ -n "$line" ]; then
 406                         # We need to set IFS here to preserve any whitespace
 407                         IFS=''
 408                         printf "%s\n" "$line"
 409                 fi
 410         done < "$IFACEDIR/$1"
 411         IFS="$OIFS"
 412 }
 413
 414 list_resolv()
 415 {
 416         [ -d "$IFACEDIR" ] || return 0
 417
 418         cmd="$1"
 419         shift
 420         excl=false
 421         list=
 422         report=false
 423         retval=0
 424
 425         case "$IF_EXCLUSIVE" in
 426         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
 427                 excl=true
 428                 if [ -d "$EXCLUSIVEDIR" ]; then
 429                         cd "$EXCLUSIVEDIR"
 430                         for i in *; do
 431                                 if [ -f "$i" ]; then
 432                                         list="${i#* }"
 433                                         break
 434                                 fi
 435                         done
 436                 fi
 437                 cd "$IFACEDIR"
 438                 for i in $inclusive_interfaces; do
 439                         if [ -f "$i" ] && [ "$list" = "$i" ]; then
 440                                 list=
 441                                 excl=false
 442                                 break
 443                         fi
 444                 done
 445                 ;;
 446         esac
 447
 448         # If we have an interface ordering list, then use that.
 449         # It works by just using pathname expansion in the interface directory.
 450         if [ -n "$1" ]; then
 451                 list="$*"
 452                 $force || report=true
 453         elif ! $excl; then
 454                 cd "$IFACEDIR"
 455                 for i in $interface_order; do
 456                         [ -f "$i" ] && list="$list $i"
 457                         for ii in "$i":* "$i".*; do
 458                                 [ -f "$ii" ] && list="$list $ii"
 459                         done
 460                 done
 461                 for i in $dynamic_order; do
 462                         if [ -e "$i" ] && ! [ -e "$METRICDIR/"*" $i" ]; then
 463                                 list="$list $i"
 464                         fi
 465                         for ii in "$i":* "$i".*; do
 466                                 if [ -f "$ii" ] && ! [ -e "$METRICDIR/"*" $ii" ]
 467                                 then
 468                                         list="$list $ii"
 469                                 fi
 470                         done
 471                 done
 472                 # Interfaces have an implicit metric of 0 if not specified.
 473                 for i in *; do
 474                         if [ -f "$i" ] && ! [ -e "$METRICDIR/"*" $i" ]; then
 475                                 list="$list $i"
 476                         fi
 477                 done
 478                 if [ -d "$METRICDIR" ]; then
 479                         cd "$METRICDIR"
 480                         for i in *; do
 481                                 [ -f "$i" ] && list="$list ${i#* }"
 482                         done
 483                 fi
 484         fi
 485
 486         cd "$IFACEDIR"
 487         retval=1
 488         for i in $(uniqify $list); do
 489                 # Only list interfaces which we really have
 490                 if ! [ -f "$i" ]; then
 491                         if $report; then
 492                                 echo "No resolv.conf for interface $i" >&2
 493                                 retval=2
 494                         fi
 495                         continue
 496                 fi
 497
 498                 if [ "$cmd" = i ] || [ "$cmd" = "-i" ]; then
 499                         printf %s "$i "
 500                 else
 501                         echo_resolv "$i" && echo
 502                 fi
 503                 [ $? = 0 ] && [ "$retval" = 1 ] && retval=0
 504         done
 505         [ "$cmd" = i ] || [ "$cmd" = "-i" ] && echo
 506         return $retval
 507 }
 508
 509 list_remove()
 510 {
 511         [ -z "$2" ] && return 0
 512         eval list=\"\$$1\"
 513         shift
 514         result=
 515         retval=0
 516
 517         set -f
 518         for e; do
 519                 found=false
 520                 for l in $list; do
 521                         case "$e" in
 522                         $l) found=true;;
 523                         esac
 524                         $found && break
 525                 done
 526                 if $found; then
 527                         retval=$(($retval + 1))
 528                 else
 529                         result="$result $e"
 530                 fi
 531         done
 532         set +f
 533         echo "${result# *}"
 534         return $retval
 535 }
 536
 537 echo_prepend()
 538 {
 539         echo "# Generated by resolvconf"
 540         if [ -n "$search_domains" ]; then
 541                 echo "search $search_domains"
 542         fi
 543         for n in $name_servers; do
 544                 echo "nameserver $n"
 545         done
 546         echo
 547 }
 548
 549 echo_append()
 550 {
 551         echo "# Generated by resolvconf"
 552         if [ -n "$search_domains_append" ]; then
 553                 echo "search $search_domains_append"
 554         fi
 555         for n in $name_servers_append; do
 556                 echo "nameserver $n"
 557         done
 558         echo
 559 }
 560
 561 replace()
 562 {
 563         while read -r keyword value; do
 564                 for r in $replace; do
 565                         k="${r%%/*}"
 566                         r="${r#*/}"
 567                         f="${r%%/*}"
 568                         r="${r#*/}"
 569                         v="${r%%/*}"
 570                         case "$keyword" in
 571                         $k)
 572                                 case "$value" in
 573                                 $f) value="$v";;
 574                                 esac
 575                                 ;;
 576                         esac
 577                 done
 578                 val=
 579                 for sub in $value; do
 580                         for r in $replace_sub; do
 581                                 k="${r%%/*}"
 582                                 r="${r#*/}"
 583                                 f="${r%%/*}"
 584                                 r="${r#*/}"
 585                                 v="${r%%/*}"
 586                                 case "$keyword" in
 587                                 $k)
 588                                         case "$sub" in
 589                                         $f) sub="$v";;
 590                                         esac
 591                                         ;;
 592                                 esac
 593                         done
 594                         val="$val${val:+ }$sub"
 595                 done
 596                 printf "%s %s\n" "$keyword" "$val"
 597         done
 598 }
 599
 600 make_vars()
 601 {
 602         # Clear variables
 603         DOMAIN=
 604         DOMAINS=
 605         SEARCH=
 606         NAMESERVERS=
 607         LOCALNAMESERVERS=
 608
 609         if [ -n "${name_servers}${search_domains}" ]; then
 610                 eval "$(echo_prepend | parse_resolv)"
 611         fi
 612         if [ -z "$VFLAG" ]; then
 613                 IF_EXCLUSIVE=1
 614                 list_resolv -i "$@" >/dev/null || IF_EXCLUSIVE=0
 615                 eval "$(list_resolv -l "$@" | replace | parse_resolv)"
 616         fi
 617         if [ -n "${name_servers_append}${search_domains_append}" ]; then
 618                 eval "$(echo_append | parse_resolv)"
 619         fi
 620
 621         # Ensure that we only list each domain once
 622         newdomains=
 623         for d in $DOMAINS; do
 624                 dn="${d%%:*}"
 625                 list_remove domain_blacklist "$dn" >/dev/null || continue
 626                 case " $newdomains" in
 627                 *" ${dn}:"*) continue;;
 628                 esac
 629                 newns=
 630                 for nd in $DOMAINS; do
 631                         if [ "$dn" = "${nd%%:*}" ]; then
 632                                 ns="${nd#*:}"
 633                                 while [ -n "$ns" ]; do
 634                                         case ",$newns," in
 635                                         *,${ns%%,*},*) ;;
 636                                         *) list_remove name_server_blacklist \
 637                                                 "${ns%%,*}" >/dev/null \
 638                                         && newns="$newns${newns:+,}${ns%%,*}";;
 639                                         esac
 640                                         [ "$ns" = "${ns#*,}" ] && break
 641                                         ns="${ns#*,}"
 642                                 done
 643                         fi
 644                 done
 645                 if [ -n "$newns" ]; then
 646                         newdomains="$newdomains${newdomains:+ }$dn:$newns"
 647                 fi
 648         done
 649         DOMAIN="$(list_remove domain_blacklist $DOMAIN)"
 650         SEARCH="$(uniqify $SEARCH)"
 651         SEARCH="$(list_remove domain_blacklist $SEARCH)"
 652         NAMESERVERS="$(uniqify $NAMESERVERS)"
 653         NAMESERVERS="$(list_remove name_server_blacklist $NAMESERVERS)"
 654         LOCALNAMESERVERS="$(uniqify $LOCALNAMESERVERS)"
 655         LOCALNAMESERVERS="$(list_remove name_server_blacklist $LOCALNAMESERVERS)"
 656         echo "DOMAIN='$DOMAIN'"
 657         echo "SEARCH='$SEARCH'"
 658         echo "NAMESERVERS='$NAMESERVERS'"
 659         echo "LOCALNAMESERVERS='$LOCALNAMESERVERS'"
 660         echo "DOMAINS='$newdomains'"
 661 }
 662
 663 force=false
 664 VFLAG=
 665 while getopts a:Dd:fhIilm:pRruvVx OPT; do
 666         case "$OPT" in
 667         f) force=true;;
 668         h) usage;;
 669         m) IF_METRIC="$OPTARG";;
 670         p) IF_PRIVATE=1;;
 671         V)
 672                 VFLAG=1
 673                 if [ "$local_nameservers" = \
 674                     "127.* 0.0.0.0 255.255.255.255 ::1" ]
 675                 then
 676                         local_nameservers=
 677                 fi
 678                 ;;
 679         x) IF_EXCLUSIVE=1;;
 680         '?') ;;
 681         *) cmd="$OPT"; iface="$OPTARG";;
 682         esac
 683 done
 684 shift $(($OPTIND - 1))
 685 args="$iface${iface:+ }$*"
 686
 687 # -I inits the state dir
 688 if [ "$cmd" = I ]; then
 689         if [ -d "$VARDIR" ]; then
 690                 rm -rf "$VARDIR"/*
 691         fi
 692         exit $?
 693 fi
 694
 695 # -D ensures that the listed config file base dirs exist
 696 if [ "$cmd" = D ]; then
 697         config_mkdirs "$@"
 698         exit $?
 699 fi
 700
 701 # -l lists our resolv files, optionally for a specific interface
 702 if [ "$cmd" = l ] || [ "$cmd" = i ]; then
 703         list_resolv "$cmd" "$args"
 704         exit $?
 705 fi
 706
 707 # Restart a service or echo the command to restart a service
 708 if [ "$cmd" = r ] || [ "$cmd" = R ]; then
 709         detect_init || exit 1
 710         if [ "$cmd" = r ]; then
 711                 set -- $args
 712                 eval "$RESTARTCMD"
 713         else
 714                 echo "$RESTARTCMD" |
 715                         sed -e '/^$/d' -e 's/^                  //g'
 716         fi
 717         exit $?
 718 fi
 719
 720 # Not normally needed, but subscribers should be able to run independently
 721 if [ "$cmd" = v ] || [ -n "$VFLAG" ]; then
 722         make_vars "$iface"
 723         exit $?
 724 fi
 725
 726 # Test that we have valid options
 727 if [ "$cmd" = a ] || [ "$cmd" = d ]; then
 728         if [ -z "$iface" ]; then
 729                 usage "Interface not specified"
 730         fi
 731 elif [ "$cmd" != u ]; then
 732         [ -n "$cmd" ] && [ "$cmd" != h ] && usage "Unknown option $cmd"
 733         usage
 734 fi
 735
 736 if [ "$cmd" = a ]; then
 737         for x in '/' \\ ' ' '*'; do
 738                 case "$iface" in
 739                 *[$x]*) error_exit "$x not allowed in interface name";;
 740                 esac
 741         done
 742         for x in '.' '-' '~'; do
 743                 case "$iface" in
 744                 [$x]*) error_exit \
 745                         "$x not allowed at start of interface name";;
 746                 esac
 747         done
 748         [ "$cmd" = a ] && [ -t 0 ] && error_exit "No file given via stdin"
 749 fi
 750
 751 if [ ! -d "$VARDIR" ]; then
 752         if [ -L "$VARDIR" ]; then
 753                 dir="$(readlink "$VARDIR")"
 754                 # link maybe relative
 755                 cd "${VARDIR%/*}"
 756                 if ! mkdir -m 0755 -p "$dir"; then
 757                         error_exit "Failed to create needed" \
 758                                 "directory $dir"
 759                 fi
 760         else
 761                 if ! mkdir -m 0755 -p "$VARDIR"; then
 762                         error_exit "Failed to create needed" \
 763                                 "directory $VARDIR"
 764                 fi
 765         fi
 766 fi
 767
 768 if [ ! -d "$IFACEDIR" ]; then
 769         mkdir -m 0755 -p "$IFACEDIR" || \
 770                 error_exit "Failed to create needed directory $IFACEDIR"
 771         if [ "$cmd" = d ]; then
 772                 # Provide the same error messages as below
 773                 if ! ${force}; then
 774                         cd "$IFACEDIR"
 775                         for i in $args; do
 776                                 warn "No resolv.conf for interface $i"
 777                         done
 778                 fi
 779                 ${force}
 780                 exit $?
 781         fi
 782 fi
 783
 784 # An interface was added, changed, deleted or a general update was called.
 785 # Due to exclusivity we need to ensure that this is an atomic operation.
 786 # Our subscribers *may* need this as well if the init system is sub par.
 787 # As such we spinlock at this point as best we can.
 788 # We don't use flock(1) because it's not widely available and normally resides
 789 # in /usr which we do our very best to operate without.
 790 [ -w "$VARDIR" ] || error_exit "Cannot write to $LOCKDIR"
 791 : ${lock_timeout:=10}
 792 while true; do
 793         if mkdir "$LOCKDIR" 2>/dev/null; then
 794                 trap 'rm -rf "$LOCKDIR";' EXIT
 795                 trap 'rm -rf "$LOCKDIR"; exit 1' INT QUIT ABRT SEGV ALRM TERM
 796                 echo $$ >"$LOCKDIR/pid"
 797                 break
 798         fi
 799         pid=$(cat "$LOCKDIR/pid")
 800         if ! kill -0 "$pid"; then
 801                 warn "clearing stale lock pid $pid"
 802                 rm -rf "$LOCKDIR"
 803                 continue
 804         fi
 805         lock_timeout=$(($lock_timeout - 1))
 806         if [ "$lock_timeout" -le 0 ]; then
 807                 error_exit "timed out waiting for lock from pid $pid"
 808         fi
 809         sleep 1
 810 done
 811
 812 case "$cmd" in
 813 a)
 814         # Read resolv.conf from stdin
 815         resolv="$(cat)"
 816         changed=false
 817         changedfile=false
 818         # If what we are given matches what we have, then do nothing
 819         if [ -e "$IFACEDIR/$iface" ]; then
 820                 if [ "$(echo "$resolv")" != \
 821                         "$(cat "$IFACEDIR/$iface")" ]
 822                 then
 823                         changed=true
 824                         changedfile=true
 825                 fi
 826         else
 827                 changed=true
 828                 changedfile=true
 829         fi
 830
 831         # Set metric and private before creating the interface resolv.conf file
 832         # to ensure that it will have the correct flags
 833         [ ! -d "$METRICDIR" ] && mkdir "$METRICDIR"
 834         oldmetric="$METRICDIR/"*" $iface"
 835         newmetric=
 836         if [ -n "$IF_METRIC" ]; then
 837                 # Pad metric to 6 characters, so 5 is less than 10
 838                 while [ ${#IF_METRIC} -le 6 ]; do
 839                         IF_METRIC="0$IF_METRIC"
 840                 done
 841                 newmetric="$METRICDIR/$IF_METRIC $iface"
 842         fi
 843         rm -f "$METRICDIR/"*" $iface"
 844         [ "$oldmetric" != "$newmetric" ] &&
 845             [ "$oldmetric" != "$METRICDIR/* $iface" ] &&
 846                 changed=true
 847         [ -n "$newmetric" ] && echo " " >"$newmetric"
 848
 849         case "$IF_PRIVATE" in
 850         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
 851                 if [ ! -d "$PRIVATEDIR" ]; then
 852                         [ -e "$PRIVATEDIR" ] && rm "$PRIVATEDIR"
 853                         mkdir "$PRIVATEDIR"
 854                 fi
 855                 [ -e "$PRIVATEDIR/$iface" ] || changed=true
 856                 [ -d "$PRIVATEDIR" ] && echo " " >"$PRIVATEDIR/$iface"
 857                 ;;
 858         *)
 859                 if [ -e "$PRIVATEDIR/$iface" ]; then
 860                         rm -f "$PRIVATEDIR/$iface"
 861                         changed=true
 862                 fi
 863                 ;;
 864         esac
 865
 866         oldexcl=
 867         for x in "$EXCLUSIVEDIR/"*" $iface"; do
 868                 if [ -f "$x" ]; then
 869                         oldexcl="$x"
 870                         break
 871                 fi
 872         done
 873         case "$IF_EXCLUSIVE" in
 874         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
 875                 if [ ! -d "$EXCLUSIVEDIR" ]; then
 876                         [ -e "$EXCLUSIVEDIR" ] && rm "$EXCLUSIVEDIR"
 877                         mkdir "$EXCLUSIVEDIR"
 878                 fi
 879                 cd "$EXCLUSIVEDIR"
 880                 for x in *; do
 881                         [ -f "$x" ] && break
 882                 done
 883                 if [ "${x#* }" != "$iface" ]; then
 884                         if [ "$x" = "${x% *}" ]; then
 885                                 x=10000000
 886                         else
 887                                 x="${x% *}"
 888                         fi
 889                         if [ "$x" = "0000000" ]; then
 890                                 warn "exclusive underflow"
 891                         else
 892                                 x=$(($x - 1))
 893                         fi
 894                         if [ -d "$EXCLUSIVEDIR" ]; then
 895                                 echo " " >"$EXCLUSIVEDIR/$x $iface"
 896                         fi
 897                         changed=true
 898                 fi
 899                 ;;
 900         *)
 901                 if [ -f "$oldexcl" ]; then
 902                         rm -f "$oldexcl"
 903                         changed=true
 904                 fi
 905                 ;;
 906         esac
 907
 908         if $changedfile; then
 909                 printf "%s\n" "$resolv" >"$IFACEDIR/$iface" || exit $?
 910         elif ! $changed; then
 911                 exit 0
 912         fi
 913         unset changed changedfile oldmetric newmetric x oldexcl
 914         ;;
 915
 916 d)
 917         # Delete any existing information about the interface
 918         cd "$IFACEDIR"
 919         changed=false
 920         for i in $args; do
 921                 if [ -e "$i" ]; then
 922                         changed=true
 923                 elif ! ${force}; then
 924                         warn "No resolv.conf for interface $i"
 925                 fi
 926                 rm -f "$i" "$METRICDIR/"*" $i" \
 927                         "$PRIVATEDIR/$i" \
 928                         "$EXCLUSIVEDIR/"*" $i" || exit $?
 929         done
 930         if ! ${changed}; then
 931                 # Set the return code based on the forced flag
 932                 ${force}
 933                 exit $?
 934         fi
 935         unset changed i
 936         ;;
 937 esac
 938
 939 case "${resolvconf:-YES}" in
 940 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) ;;
 941 *) exit 0;;
 942 esac
 943
 944 # Try and detect a suitable init system for our scripts
 945 detect_init
 946 export RESTARTCMD RCDIR _NOINIT_WARNED
 947
 948 eval "$(make_vars)"
 949 export RESOLVCONF DOMAINS SEARCH NAMESERVERS LOCALNAMESERVERS
 950 : ${list_resolv:=list_resolv -l}
 951 retval=0
 952
 953 # Run scripts in the same directory resolvconf is run from
 954 # in case any scripts accidentally dump files in the wrong place.
 955 cd "$_PWD"
 956 for script in "$LIBEXECDIR"/*; do
 957         if [ -f "$script" ]; then
 958                 eval script_enabled="\$${script##*/}"
 959                 case "${script_enabled:-YES}" in
 960                 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) ;;
 961                 *) continue;;
 962                 esac
 963                 if [ -x "$script" ]; then
 964                         "$script" "$cmd" "$iface"
 965                 else
 966                         (set -- "$cmd" "$iface"; . "$script")
 967                 fi
 968                 retval=$(($retval + $?))
 969         fi
 970 done
 971 exit $retval