]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - contrib/tcpdump/CHANGES
Update LLDB snapshot to upstream r225923 (git 2b588ecd)
[FreeBSD/FreeBSD.git] / contrib / tcpdump / CHANGES
1 Tuesday  Sep.  2, 2014 mcr@sandelman.ca
2         fix out-of-source-tree builds: find libpcap that is out of source
3         better configure check for libsmi
4
5 Saturday Jul. 19, 2014 mcr@sandelman.ca
6   Summary for 4.6.1 tcpdump release
7         added FreeBSD capsicum
8         add a short option '#', same as long option '--number'
9
10 Wednesday Jul. 2, 2014 mcr@sandelman.ca
11   Summary for 4.6.0 tcpdump release
12         all of tcpdump is now using the new "NDO" code base (Thanks Denis!)
13         nflog, mobile, forces, pptp, AODV, AHCP, IPv6, OSPFv4, RPL, DHCPv6 enhancements/fixes
14         M3UA decode added.
15         many new test cases: 82 in 4.5.1 to 133 in 4.6.0
16         many improvements to travis continuous integration system: OSX, and Coverity options
17         cleaned up some unnecessary header files
18         Added bittok2str().
19         a number of unaligned access faults fixed
20         -A flag does not consider CR to be printable anymore
21         fx.lebail took over coverity baby sitting
22         default snapshot size increased to 256K for accomodate USB captures
23         WARNING: this release contains a lot of very worthwhile code churn.
24
25 Wednesday Jan. 15, 2014 guy@alum.mit.edu
26   Summary for 4.5.2 tcpdump release
27         Man page fix
28         Fix crashes on SPARC
29
30 Monday Nov. 11, 2013 mcr@sandelman.ca
31   Summary for 4.5.1 tcpdump release
32         CREDITS file fixes
33
34 Thursday Nov. 7, 2013  mcr@sandelman.ca and guy@alum.mit.edu.
35   Summary for 4.5.0 tcpdump release
36         some NFSv4 fixes for printing
37         fix printing of unknown TCP options, and tcp fast-open
38         fixes for syslog parser
39         some gcc-version-specific flag tuning
40         adopt MacOS deprecation workarounds for openssl
41         improvements to babel printing
42         add OpenFlow 1.0 (no SSL) and test cases
43         GeoNet printer.
44         added STBC Rx support
45         improvements to DHCPv6 decoder
46         clarify which autoconf is needed
47         Point users to the the-tcpdump-group repository on GitHub rather
48             than the mcr repository
49         Add MSDP printer.
50         Fixed IPv6 check on Solaris and other OSes requiring extra
51             networking libraries.
52         Add support for VXLAN (draft-mahalingam-dutt-dcops-vxlan-03),
53             and add "vxlan" as an option for -T.
54         Add support for OTV (draft-hasmit-otv-04).
55         fixes for DLT_IEEE802_11_RADIO datalink types
56         added MPTCP decoder
57
58 Saturday April 6, 2013 guy@alum.mit.edu.
59   Summary for 4.4.0 tcpdump release
60         RPKI-RTR (RFC6810) is now official (TCP Port 323)
61         Fix detection of OpenSSL libcrypto.
62         Add DNSSL (RFC6106) support.
63         Add "radius" as an option for -T.
64         Update Action codes for handle_action function according to
65             802.11s amendment.
66         Decode DHCPv6 AFTR-Name option (RFC6334).
67         Updates for Babel.
68         Fix printing of infinite lifetime in ICMPv6.
69         Added support for SPB, SPBM Service Identifier, and Unicast
70             Address sub-TLV in ISIS.
71         Decode RIPv2 authentication up to RFC4822.
72         Fix RIP Request/full table decoding issues.
73         On Linux systems with cap-ng.h, drop root privileges
74             using Linux Capabilities.
75         Add support for reading multiple files.
76         Add MS NLB heartbeat printer.
77         Separate multiple nexthops in BGP.
78
79 Wednesday  November 28, 2012 guy@alum.mit.edu.
80   Summary for 4.3.1 tcpdump release
81         Print "LLDP, length N" for LLDP packets even when not in verbose
82             mode, so something is printed even if only the timestamp is
83             present
84         Document "-T carp"
85         Print NTP poll interval correctly (it's an exponent, so print
86             both its raw value and 2^value)
87         Document that "-e" is used to get MAC addresses
88         More clearly document that you need to escape or quote
89             backslashes in filter expressions on the command line
90         Fix some "the the" in the man page
91         Use the right maximum path length
92         Don't treat 192_1_2, when passed to -i, as an interface number
93
94 Friday  April 3, 2012.  mcr@sandelman.ca.
95   Summary for 4.3.0 tcpdump release
96         fixes for forces: SPARSE data (per RFC 5810)
97         some more test cases added
98         updates to documentation on -l, -U and -w flags.
99         Fix printing of BGP optional headers.
100         Tried to include DLT_PFSYNC support, failed due to headers required.
101         added TIPC support.
102         Fix LLDP Network Policy bit definitions.
103         fixes for IGMPv3's Max Response Time: it is in units of 0.1 second.
104         SIGUSR1 can be used rather than SIGINFO for stats
105         permit -n flag to affect print-ip for protocol numbers
106         ND_OPT_ADVINTERVAL is in milliseconds, not seconds
107         Teach PPPoE parser about RFC 4638
108
109
110 Friday  December 9, 2011.  guy@alum.mit.edu.
111   Summary for 4.2.1 tcpdump release
112         Only build the Babel printer if IPv6 is enabled.
113         Support Babel on port 6696 as well as 6697.
114         Include ppi.h in release tarball.
115         Include all the test files in the release tarball, and don't
116          "include" test files that no longer exist.
117         Don't assume we have <rpc/rpc.h> - check for it.
118         Support "-T carp" as a way of dissecting IP protocol 112 as CARP
119          rather than VRRP.
120         Support Hilscher NetAnalyzer link-layer header format.
121         Constify some pointers and fix compiler warnings.
122         Get rid of never-true test.
123         Fix an unintended fall-through in a case statement in the ARP
124          printer.
125         Fix several cases where sizeof(sizeof(XXX)) was used when just
126          sizeof(XXX) was intended.
127         Make stricter sanity checks in the ES-IS printer.
128         Get rid of some GCCisms that caused builds to fai with compilers
129          that don't support them.
130         Fix typo in man page.
131         Added length checks to Babel printer.
132
133 Sunday  July 24, 2011.  mcr@sandelman.ca.
134   Summary for 4.2.+
135         merged 802.15.4 decoder from Dmitry Eremin-Solenikov <dbaryshkov
136           at gmail dot com>
137         updates to forces for new port numbers
138         Use "-H", not "-h", for the 802.11s option. (-h always help)
139         Better ICMPv6 checksum handling.
140         add support for the RPKI/Router Protocol, per -ietf-sidr-rpki-rtr-12
141         get rid of uuencoded pcap test files, git can do binary.
142         sFlow changes for 64-bit counters.
143         fixes for PPI packet header handling and printing.
144         Add DCB Exchange protocol (DCBX) version 1.01.
145         Babel dissector, from Juliusz Chroboczek and GrĂ©goire Henry.
146         improvements to radiotap for rate values > 127.
147         Many improvements to ForCES decode, including fix SCTP TML port
148         updated RPL type code to RPL-17 draft
149         Improve printout of DHCPv6 options.
150         added support and test case for QinQ (802.1q VLAN) packets
151         Handle DLT_IEEE802_15_4_NOFCS like DLT_IEEE802_15_4.
152         Build fixes for Sparc and other machines with alignment restrictions.
153         Merged changes from Debian package.
154         PGM: Add ACK decoding and add PGMCC DATA and FEEDBACK options.
155         Build fixes for OSX (Snow Leopard and others)
156         Add support for IEEE 802.15.4 packets
157
158 Tue.    July 20, 2010.  guy@alum.mit.edu.
159   Summary for 4.1.2 tcpdump release
160         If -U is specified, flush the file after creating it, so it's
161           not zero-length
162         Fix TCP flags output description, and some typoes, in the man
163           page
164         Add a -h flag, and only attempt to recognize 802.11s mesh
165           headers if it's set
166         When printing the link-layer type list, send *all* output to
167           stderr
168         Include the CFLAGS setting when configure was run in the
169           compiler flags
170
171 Thu.    April 1, 2010.  guy@alum.mit.edu.
172   Summary for 4.1.1 tcpdump release
173         Fix build on systems with PF, such as FreeBSD and OpenBSD.
174         Don't blow up if a zero-length link-layer address is passed to
175           linkaddr_string().
176
177 Thu.    March 11, 2010.  ken@netfunctional.ca/guy@alum.mit.edu.
178   Summary for 4.1.0 tcpdump release
179         Fix printing of MAC addresses for VLAN frames with a length
180           field
181         Add some additional bounds checks and use the EXTRACT_ macros
182           more
183         Add a -b flag to print the AS number in BGP packets in ASDOT
184           notation rather than ASPLAIN notation
185         Add ICMPv6 RFC 5006 support
186         Decode the access flags in NFS access requests
187         Handle the new DLT_ for memory-mapped USB captures on Linux
188         Make the default snapshot (-s) the maximum
189         Print name of device (when -L is used)
190         Support for OpenSolaris (and SXCE build 125 and later)
191         Print new TCP flags
192         Add support for RPL DIO
193         Add support for TCP User Timeout (UTO)
194         Add support for non-standard Ethertypes used by 3com PPPoE gear
195         Add support for 802.11n and 802.11s
196         Add support for Transparent Ethernet Bridge ethertype in GRE
197         Add 4 byte AS support for BGP printer
198         Add support for the MDT SAFI 66 BG printer
199         Add basic IPv6 support to print-olsr
200         Add USB printer
201         Add printer for ForCES
202         Handle frames with an FCS
203         Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames
204         Fix TCP sequence number printing
205         Report 802.2 packets as 802.2 instead of 802.3
206         Don't include -L/usr/lib in LDFLAGS
207         On x86_64 Linux, look in lib64 directory too
208         Lots of code clean ups
209         Autoconf clean ups
210         Update testcases to make output changes
211         Fix compiling with/out smi (--with{,out}-smi)
212         Fix compiling without IPv6 support (--disable-ipv6)
213
214 Mon.    October 27, 2008.  ken@netfunctional.ca.  Summary for 4.0.0 tcpdump release
215         Add support for Bluetooth Sniffing
216         Add support for Realtek Remote Control Protocol (openrrcp.org.ru)
217         Add support for 802.11 AVS
218         Add support for SMB over TCP
219         Add support for 4 byte BGP AS printing
220         Add support for compiling on case-insensitive file systems
221         Add support for ikev2 printing
222         Update support for decoding AFS
223         Update DHCPv6 printer
224         Use newer libpcap API's (allows -B option on all platforms)
225         Add -I to turn on monitor mode
226         Bugfixes in lldp, lspping, dccp, ESP, NFS printers
227         Cleanup unused files and various cruft
228
229 Mon.    September 10, 2007.  ken@xelerance.com.  Summary for 3.9.8 tcpdump release
230         Rework ARP printer
231         Rework OSPFv3 printer
232         Add support for Frame-Relay ARP
233         Decode DHCP Option 121 (RFC 3442 Classless Static Route)
234         Decode DHCP Option 249 (MS Classless Static Route) the same as Option 121
235         TLV: Add support for Juniper .pcap extensions
236         Print EGP header in new-world-order style
237         Converted print-isakmp.c to NETDISSECT
238         Moved AF specific stuff into af.h
239         Test subsystem now table driven, and saves outputs and diffs to one place
240         Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted
241          libpcap files on an OS other than where the file was generated
242
243
244 Wed.    July 23, 2007.  mcr@xelerance.com.  Summary for 3.9.7 libpcap release
245
246         NFS: Print unsigned values as such.
247         RX: parse safely.
248         BGP: fixes for IPv6-less builds.
249         801.1ag: use standard codepoint.
250         use /dev/bpf on systems with such a device.
251         802.11: print QoS data, avoid dissect of no-data frame, ignore padding.
252         smb: make sure that we haven't gone past the end of the captured data.
253         smb: squelch an uninitialized complaint from coverity.
254         NFS: from NetBSD; don't interpret the reply as a possible NFS reply
255                 if it got MSG_DENIED.
256         BGP: don't print TLV values that didn't fit, from www.digit-labs.org.
257         revised INSTALL.txt about libpcap dependancy.
258
259 Wed.    April 25, 2007. ken@xelerance.com.  Summary for 3.9.6 tcpdump release
260         Update man page to reflect changes to libpcap
261         Changes to both TCP and IP Printer Output
262         Fix a potential buffer overflow in the 802.11 printer
263         Print basic info about a few more Cisco LAN protocols.
264         mDNS cleanup
265         ICMP MPLS rework of the extension code
266         bugfix: use the correct codepoint for the OSPF simple text auth token
267          entry, and use safeputs to print the password.
268         Add support in pflog for additional values
269         Add support for OIF RSVP Extensions UNI 1.0 Rev. 2 and additional RSVP objects
270         Add support for the Message-id NACK c-type.
271         Add support for 802.3ah loopback ctrl msg
272         Add support for Multiple-STP as per 802.1s
273         Add support for rapid-SPT as per 802.1w
274         Add support for CFM Link-trace msg, Link-trace-Reply msg,
275          Sender-ID tlv, private tlv, port, interface status
276         Add support for unidirectional link detection as per
277          http://www.ietf.org/internet-drafts/draft-foschiano-udld-02.txt
278         Add support for the olsr protocol as per RFC 3626 plus the LQ
279          extensions from olsr.org
280         Add support for variable-length checksum in DCCP, as per section 9 of
281          RFC 4340.
282         Add support for per-VLAN spanning tree and per-VLAN rapid spanning tree
283         Add support for Multiple-STP as per 802.1s
284         Add support for the cisco propriatry 'dynamic trunking protocol'
285         Add support for the cisco proprietary VTP protocol
286         Update dhcp6 options table as per IETF standardization activities
287
288
289 Tue.    September 19, 2006. ken@xelerance.com. Summary for 3.9.5 tcpdump release
290
291         Fix compiling on AIX (, at end of ENUM)
292         Updated list of DNS RR typecodes
293         Use local Ethernet defs on WIN32
294         Add support for Frame-Relay ARP
295         Fixes for compiling under MSVC++
296         Add support for parsing Juniper .pcap files
297         Add support for FRF.16 Multilink Frame-Relay (DLT_MFR)
298         Rework the OSPFv3 printer
299         Fix printing for 4.4BSD/NetBSD NFS Filehandles
300         Add support for Cisco style NLPID encapsulation
301         Add cisco prop. eigrp related, extended communities
302         Add support for BGP signaled VPLS
303         Cleanup the bootp printer
304         Add support for PPP over Frame-Relay
305         Add some bounds checking to the IP options code, and clean up
306          the options output a bit.
307         Add additional modp groups to ISAKMP printer
308         Add support for Address-Withdraw and Label-Withdraw Msgs
309         Add support for the BFD Discriminator TLV
310         Fixes for 64bit compiling
311         Add support for PIMv2 checksum verification
312         Add support for further dissection of the IPCP Compression Option
313         Add support for Cisco's proposed VQP protocol
314         Add basic support for keyed authentication TCP option
315         Lots of minor cosmetic changes to output printers
316
317
318 Mon.    September 19, 2005.  ken@xelerance.com. Summary for 3.9.4 tcpdump release
319         Decoder support for more Juniper link-layer types
320         Fix a potential buffer overflow (although it can't occur in
321                 practice).
322         Fix the handling of unknown management frame types in the 802.11
323                 printer.
324         Add FRF.16 support, fix various Frame Relay bugs.
325         Add support for RSVP integrity objects, update fast-reroute
326                 object printer to latest spec.
327         Clean up documentation of vlan filter expression, document mpls
328                 filter expression.
329         Document new pppoed and pppoes filter expressions.
330         Update diffserver-TE codepoints as per RFC 4124.
331         Spelling fixes in ICMPv6.
332         Don't require any fields other than flags to be present in IS-IS
333                 restart signaling TLVs, and only print the system ID in
334                 those TLVs as system IDs, not as node IDs.
335         Support for DCCP.
336
337 Tue.    July 5, 2005.  ken@xelerance.com. Summary for 3.9.3 tcpdump release
338
339         Option to chroot() when dropping privs
340         Fixes for compiling on nearly every platform,
341                 including improved 64bit support
342         Many new testcases
343         Support for sending packets
344         Many compliation fixes on most platforms
345         Fixes for recent version of GCC to eliminate warnings
346         Improved Unicode support
347
348         Decoders & DLT Changes, Updates and New:
349                 AES ESP support
350                 Juniper ATM, FRF.15, FRF.16, PPPoE,
351                         ML-FR, ML-PIC, ML-PPP, PL-PPP, LS-PIC
352                         GGSN,ES,MONITOR,SERVICES
353                 L2VPN
354                 Axent Raptor/Symantec Firewall
355                 TCP-MD5 (RFC 2385)
356                 ESP-in-UDP (RFC 3948)
357                 ATM OAM
358                 LMP, LMP Service Discovery
359                 IP over FC
360                 IP over IEEE 1394
361                 BACnet MS/TP
362                 SS7
363                 LDP over TCP
364                 LACP, MARKER as per 802.3ad
365                 PGM (RFC 3208)
366                 LSP-PING
367                 G.7041/Y.1303 Generic Framing Procedure
368                 EIGRP-IP, EIGRP-IPX
369                 ICMP6
370                 Radio - via radiotap
371                 DHCPv6
372                 HDLC over PPP
373
374 Tue.   March 30, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.3 release
375
376         No changes from 3.8.2. Version bumped only to maintain consistency
377         with libpcap 0.8.3.
378
379 Mon.   March 29, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.2 release
380
381         Fixes for print-isakmp.c      CVE:    CAN-2004-0183, CAN-2004-0184
382                              http://www.rapid7.com/advisories/R7-0017.html
383         IP-over-IEEE1394 printing.
384         some MINGW32 changes.
385         updates for autoconf 2.5
386         fixes for print-aodv.c - check for too short packets
387         formatting changes to print-ascii for hex output.
388         check for too short packets: print-bgp.c, print-bootp.c, print-cdp.c,
389                 print-chdlc.c, print-domain.c, print-icmp.c, print-icmp6.c,
390                 print-ip.c, print-lwres.c, print-ospf.c, print-pim.c,
391                 print-ppp.c,print-pppoe.c, print-rsvp.c, print-wb.c
392         print-ether.c - better handling of unknown types.
393         print-isoclns.c - additional decoding of types.
394         print-llc.c - strings for LLC names added.
395         print-pfloc.c - various enhancements
396         print-radius.c - better decoding to strings.
397
398 Wed.   November 12, 2003. mcr@sandelman.ottawa.on.ca. Summary for 3.8 release
399
400         changed syntax of -E argument so that multiple SAs can be decrypted
401         fixes for Digital Unix headers and Documentation
402         __attribute__ fixes
403         CDP changes from Terry Kennedy <terry@tmk.com>.
404         IPv6 mobility updates from Kazushi Sugyo <sugyo@pb.jp.nec.com>
405         Fixes for ASN.1 decoder for 2.100.3 forms.
406         Added a count of packets received and processed to clarify numbers.
407         Incorporated WinDUMP patches for Win32 builds.
408         PPPoE payload length headers.
409         Fixes for HP C compiler builds.
410         Use new pcap_breakloop() and pcap_findalldevs() if we can.
411         BGP output split into multiple lines.
412         Fixes to 802.11 decoding.
413         Fixes to PIM decoder.
414         SuperH is a CPU that can't handle unaligned access. Many fixes for
415                 unaligned access work.
416         Fixes to Frame-Relay decoder for Q.933/922 frames.
417         Clarified when Solaris can do captures as non-root.
418         Added tests/ subdir for examples/regression tests.
419         New -U flag.    -flush stdout after every packet
420         New -A flag     -print ascii only
421         support for decoding IS-IS inside Cisco HDLC Frames
422         more verbosity for tftp decoder
423         mDNS decoder
424         new BFD decoder
425         cross compilation patches
426         RFC 3561 AODV support.
427         UDP/TCP pseudo-checksum properly for source-route options.
428         sanitized all files to modified BSD license
429         Add support for RFC 2625 IP-over-Fibre Channel.
430         fixes for DECnet support.
431         Support RFC 2684 bridging of Ethernet, 802.5 Token Ring, and FDDI.
432         RFC 2684 encapsulation of BPDUs.
433
434 Tuesday, February 25, 2003. fenner@research.att.com.  3.7.2 release
435
436         Fixed infinite loop when parsing malformed isakmp packets.
437          (reported by iDefense; already fixed in CVS)
438         Fixed infinite loop when parsing malformed BGP packets.
439         Fixed buffer overflow with certain malformed NFS packets.
440         Pretty-print unprintable network names in 802.11 printer.
441         Handle truncated nbp (appletalk) packets.
442         Updated DHCPv6 printer to match draft-ietf-dhc-dhcpv6-22.txt
443         Print IP protocol name even if we don't have a printer for it.
444         Print IP protocol name or number for fragments.
445         Print the whole MPLS label stack, not just the top label.
446         Print request header and file handle for NFS v3 FSINFO and PATHCONF
447          requests.
448         Fix NFS packet truncation checks.
449         Handle "old" DR-Priority and Bidir-Capable PIM HELLO options.
450         Handle unknown RADIUS attributes properly.
451         Fix an ASN.1 parsing error that would cause e.g. the OID
452          2.100.3 to be misrepresented as 4.20.3 .
453
454 Monday, January 21, 2002. mcr@sandelman.ottawa.on.ca. Summary for 3.7 release
455 see http://www.tcpdump.org/cvs-log/2002-01-21.10:16:48.html for commit log.
456         keyword "ipx" added.
457         Better OSI/802.2 support on Linux.
458         IEEE 802.11 support, from clenahan@fortresstech.com, achirica@ttd.net.
459         LLC SAP support for FDDI/token ring/RFC-1483 style ATM
460         BXXP protocol was replaced by the BEEP protocol;
461         improvements to SNAP demux.
462         Changes to "any" interface documentation.
463         Documentation on pcap_stats() counters.
464         Fix a memory leak found by Miklos Szeredi - pcap_ether_aton().
465         Added MPLS encapsulation decoding per RFC3032.
466         DNS dissector handles TKEY, TSIG and IXFR.
467         adaptive SLIP interface patch from Igor Khristophorov <igor@atdot.org>
468         SMB printing has much improved bounds checks
469         OUI 0x0000f8 decoded as encapsulated ethernet for Cisco-custom bridging
470         Zephyr support, from Nickolai Zeldovich <kolya@MIT.EDU>.
471         Solaris - devices with digits in them. Stefan Hudson <hudson@mbay.net>
472         IPX socket 0x85be is for Cisco EIGRP over IPX.
473         Improvements to fragmented ESP handling.
474         SCTP support from Armando L. Caro Jr. <acaro@mail.eecis.udel.edu>
475         Linux ARPHDR_ATM support fixed.
476         Added a "netbeui" keyword, which selects NetBEUI packets.
477         IPv6 ND improvements, MobileIP dissector, 2292bis-02 for RA option.
478         Handle ARPHDR_HDLC from Marcus Felipe Pereira <marcus@task.com.br>.
479         Handle IPX socket 0x553 -> NetBIOS-over-IPX socket, "nwlink-dgm"
480         Better Linux libc5 compat.
481         BIND9 lwres dissector added.
482         MIPS and SPARC get strict alignment macros (affects print-bgp.c)
483         Apple LocalTalk LINKTYPE_ reserved.
484         New time stamp formats documented.
485         DHCP6 updated to draft-22.txt spec.
486         ICMP types/codes now accept symbolic names.
487         Add SIGINFO handler from LBL
488         encrypted CIPE tunnels in IRIX, from Franz Schaefer <schaefer@mond.at>.
489         now we are -Wstrict-prototype clean.
490         NetBSD DLT_PPP_ETHER; adapted from Martin Husemann <martin@netbsd.org>.
491         PPPoE dissector cleaned up.
492         Support for LocalTalk hardware, from Uns Lider <unslider@miranda.org>.
493         In dissector, now the caller prints the IP addresses rather than proto.
494         cjclark@alum.mit.edu: print the IP proto for non-initial fragments.
495         LLC frames with a DSAP and LSAP of 0xe0 are IPX frames.
496         Linux cooked frames with a type value of LINUX_SLL_P_802_3 are IPX.
497         captures on the "any" device won't be done in promiscuous mode
498         Token Ring support on DLPI - Onno van der Linden <onno@simplex.nl>
499         ARCNet support, from NetBSD.
500         HSRP dissector, from Julian Cowley <julian@lava.net>.
501         Handle (GRE-encapsulated) PPTP
502         added -C option to rotate save file every optarg * 1,000,000 bytes.
503         support for "vrrp" name - NetBSD, by Klaus Klein <kleink@netbsd.org>.
504         PPTP support, from Motonori Shindo <mshindo@mshindo.net>.
505         IS-IS over PPP support, from Hannes Gredler <hannes@juniper.net>.
506         CNFP support for IPv6,format. Harry Raaymakers <harryr@connect.com.au>.
507         ESP printing updated to RFC2406.
508         HP-UX can now handle large number of PPAs.
509         MSDP printer added.
510         L2TP dissector improvements from Motonori Shindo.
511
512 Tuesday January 9, 2001. mcr@sandelman.ottawa.on.ca. Summary for 3.6 release
513         Cleaned up documentation.
514         Promisc mode fixes for Linux
515         IPsec changes/cleanups.
516         Alignment fixes for picky architectures
517
518         Removed dependency on native headers for packet dissectors.
519         Removed Linux specific headers that were shipped
520
521         libpcap changes provide for exchanging capture files between
522           systems. Save files now have well known PACKET_ values instead of
523           depending upon system dependant mappings of DLT_* types.
524
525         Support for computing/checking IP and UDP/TCP checksums.
526
527         Updated autoconf stock files.
528
529         IPv6 improvements: dhcp (draft-15), mobile-ip6, ppp, ospf6,
530
531         Added dissector support for: ISOCLNS, Token Ring, IGMPv3, bxxp,
532                 timed, vrrp, radius, chdlc, cnfp, cdp, IEEE802.1d, raw-AppleTalk
533
534         Added filtering support for: VLANs, ESIS, ISIS
535
536         Improvements to: print-telnet, IPTalk, bootp/dhcp, ECN, PPP,
537                 L2TP, PPPoE
538
539         HP-UX 11.0 -- find the right dlpi device.
540         Solaris 8 - IPv6 works
541         Linux - Added support for an "any" device to capture on all interfaces
542
543         Security fixes: buffer overrun audit done. Strcpy replaced with
544                 strlcpy, sprintf replaced with snprintf.
545         Look for lex problems, and warn about them.
546
547
548 v3.5 Fri Jan 28 18:00:00 PST 2000
549
550 Bill Fenner <fenner@research.att.com>
551 - switch to config.h for autoconf
552 - unify RCSID strings
553 - Updated PIMv1, PIMv2, DVMRP, IGMP parsers, add Cisco Auto-RP parser
554 - Really fix the RIP printer
555 - Fix MAC address -> name translation.
556 - some -Wall -Wformat fixes
557 - update makemib to parse much of SMIv2
558 - Print TCP sequence # with -vv even if you normally wouldn't
559 - Print as much of IP/TCP/UDP headers as possible even if truncated.
560
561 itojun@iijlab.net
562 - -X will make a ascii dump.  from netbsd.
563 - telnet command sequence decoder (ff xx xx).  from netbsd.
564 - print-bgp.c: improve options printing.  ugly code exists for
565   unaligned option parsing (need some fix).
566 - const poisoning in SMB decoder.
567 - -Wall -Werror clean checks.
568 - bring in KAME IPv6/IPsec decoding code.
569
570 Assar Westerlund  <assar@sics.se>
571 - SNMPv2 and SNMPv3 printer
572 - If compiled with libsmi, tcpdump can load MIBs on the fly to decode
573   SNMP packets.
574 - Incorporate NFS parsing code from NetBSD.  Adds support for nfsv3.
575 - portability fixes
576 - permit building in different directories.
577
578 Ken Hornstein <kenh@cmf.nrl.navy.mil>
579 - bring in code at
580   /afs/transarc.com/public/afs-contrib/tools/tcpdump for parsing
581   AFS3 packets
582
583 Andrew Tridgell <tridge@linuxcare.com>
584 - SMB printing code
585
586 Love <lha@stacken.kth.se>
587 - print-rx.c: add code for printing MakeDir and StoreStatus.  Also
588   change date format to the right one.
589
590 Michael C. Richardson  <mcr@sandelman.ottawa.on.ca>
591 - Created tcpdump.org repository
592
593 v3.4 Sat Jul 25 12:40:55 PDT 1998
594
595 - Hardwire Linux slip support since it's too hard to detect.
596
597 - Redo configuration of "network" libraries (-lsocket and -lnsl) to
598   deal with IRIX. Thanks to John Hawkinson (jhawk@mit.edu)
599
600 - Added -a which tries to translate network and broadcast addresses to
601   names. Suggested by Rob van Nieuwkerk (robn@verdi.et.tudelft.nl)
602
603 - Added a configure option to disable gcc.
604
605 - Added a "raw" packet printer.
606
607 - Not having an interface address is no longer fatal. Requested by John
608   Hawkinson.
609
610 - Rework signal setup to accommodate Linux.
611
612 - OSPF truncation check fix. Also display the type of OSPF packets
613   using MD5 authentication. Thanks to Brian Wellington
614   (bwelling@tis.com)
615
616 - Fix truncation check bugs in the Kerberos printer. Reported by Ezra
617   Peisach (epeisach@mit.edu)
618
619 - Don't catch SIGHUP when invoked with nohup(1). Thanks to Dave Plonka
620   (plonka@mfa.com)
621
622 - Specify full install target as a way of detecting if install
623   directory does not exist. Thanks to Dave Plonka.
624
625 - Bit-swap FDDI addresses for BSD/OS too. Thanks to Paul Vixie
626   (paul@vix.com)
627
628 - Fix off-by-one bug when testing size of ethernet packets. Thanks to
629   Marty Leisner (leisner@sdsp.mc.xerox.com)
630
631 - Add a local autoconf macro to check for routines in libraries; the
632   autoconf version is broken (it only puts the library name in the
633   cache variable name). Thanks to John Hawkinson.
634
635 - Add a local autoconf macro to check for types; the autoconf version
636   is broken (it uses grep instead of actually compiling a code fragment).
637
638 - Modified to support the new BSD/OS 2.1 PPP and SLIP link layer header
639   formats.
640
641 - Extend OSF ip header workaround to versions 1 and 2.
642
643 - Fix some signed problems in the nfs printer. As reported by David
644   Sacerdote (davids@silence.secnet.com)
645
646 - Detect group wheel and use it as the default since BSD/OS' install
647   can't hack numeric groups. Reported by David Sacerdote.
648
649 - AIX needs special loader options. Thanks to Jonathan I. Kamens
650   (jik@cam.ov.com)
651
652 - Fixed the nfs printer to print port numbers in decimal. Thanks to
653   Kent Vander Velden (graphix@iastate.edu)
654
655 - Find installed libpcap in /usr/local/lib when not using gcc.
656
657 - Disallow network masks with non-network bits set.
658
659 - Attempt to detect "egcs" versions of gcc.
660
661 - Add missing closing double quotes when displaying bootp strings.
662   Reported by Viet-Trung Luu (vluu@picard.math.uwaterloo.ca)
663
664 v3.3 Sat Nov 30 20:56:27 PST 1996
665
666 - Added Linux support.
667
668 - GRE encapsulated packet printer thanks to John Hawkinson
669   (jhawk@mit.edu)
670
671 - Rewrite gmt2local() to avoid problematic os dependencies.
672
673 - Suppress nfs truncation message on errors.
674
675 - Add missing m4 quoting in AC_LBL_UNALIGNED_ACCESS autoconf macro.
676   Reported by Joachim Ott (ott@ardala.han.de)
677
678 - Enable "ip_hl vs. ip_vhl" workaround for OSF4 too.
679
680 - Print arp hardware type in host order. Thanks to Onno van der Linden
681   (onno@simplex.nl)
682
683 - Avoid solaris compiler warnings. Thanks to Bruce Barnett
684   (barnett@grymoire.crd.ge.com)
685
686 - Fix rip printer to not print one more route than is actually in the
687   packet. Thanks to Jean-Luc Richier (Jean-Luc.Richier@imag.fr) and
688   Bill Fenner (fenner@parc.xerox.com)
689
690 - Use autoconf endian detection since BYTE_ORDER isn't defined on all systems.
691
692 - Fix dvmrp printer truncation checks and add a dvmrp probe printer.
693   Thanks to Danny J. Mitzel (mitzel@ipsilon.com)
694
695 - Rewrite ospf printer to improve truncation checks.
696
697 - Don't parse tcp options past the EOL. As noted by David Sacerdote
698   (davids@secnet.com). Also, check tcp options to make sure they ar
699   actually in the tcp header (in addition to the normal truncation
700   checks). Fix the SACK code to print the N blocks (instead of the
701   first block N times).
702
703 - Don't say really small UDP packets are truncated just because they
704   aren't big enough to be a RPC. As noted by David Sacerdote.
705
706 v3.2.1 Sun Jul 14 03:02:26 PDT 1996
707
708 - Added rfc1716 icmp codes as suggested by Martin Fredriksson
709   (martin@msp.se)
710
711 - Print mtu for icmp unreach need frag packets. Thanks to John
712   Hawkinson (jhawk@mit.edu)
713
714 - Decode icmp router discovery messages. Thanks to Jeffrey Honig
715   (jch@bsdi.com)
716
717 - Added a printer entry for DLT_IEEE802 as suggested by Tak Kushida
718   (kushida@trl.ibm.co.jp)
719
720 - Check igmp checksum if possible. Thanks to John Hawkinson.
721
722 - Made changes for SINIX. Thanks to Andrej Borsenkow
723   (borsenkow.msk@sni.de)
724
725 - Use autoconf's idea of the top level directory in install targets.
726   Thanks to John Hawkinson.
727
728 - Avoid infinite loop in tcp options printing code. Thanks to Jeffrey
729   Mogul (mogul@pa.dec.com)
730
731 - Avoid using -lsocket in IRIX 5.2 and earlier since it breaks snoop.
732   Thanks to John Hawkinson.
733
734 - Added some more packet truncation checks.
735
736 - On systems that have it, use sigset() instead of signal() since
737   signal() has different semantics on these systems.
738
739 - Fixed some more alignment problems on the alpha.
740
741 - Add code to massage unprintable characters in the domain and ipx
742   printers. Thanks to John Hawkinson.
743
744 - Added explicit netmask support. Thanks to Steve Nuchia
745   (steve@research.oknet.com)
746
747 - Add "sca" keyword (for DEC cluster services) as suggested by Terry
748   Kennedy (terry@spcvxa.spc.edu)
749
750 - Add "atalk" keyword as suggested by John Hawkinson.
751
752 - Added an igrp printer. Thanks to Francis Dupont
753   (francis.dupont@inria.fr)
754
755 - Print IPX net numbers in hex a la Novell Netware. Thanks to Terry
756   Kennedy (terry@spcvxa.spc.edu)
757
758 - Fixed snmp extended tag field parsing bug. Thanks to Pascal Hennequin
759   (pascal.hennequin@hugo.int-evry.fr)
760
761 - Added some ETHERTYPEs missing on some systems.
762
763 - Added truncated packet macros and various checks.
764
765 - Fixed endian problems with the DECnet printer.
766
767 - Use $CC when checking gcc version. Thanks to Carl Lindberg
768   (carl_lindberg@blacksmith.com)
769
770 - Fixes for AIX (although this system is not yet supported). Thanks to
771   John Hawkinson.
772
773 - Fix bugs in the autoconf misaligned accesses code fragment.
774
775 - Include sys/param.h to get BYTE_ORDER in a few places. Thanks to
776   Pavlin Ivanov Radoslavov (pavlin@cs.titech.ac.jp)
777
778 v3.2 Sun Jun 23 02:28:10 PDT 1996
779
780 - Print new icmp unreachable codes as suggested by Martin Fredriksson
781   (martin@msp.se). Also print code value when unknown for icmp redirect
782   and time exceeded.
783
784 - Fix an alignment endian bug in getname(). Thanks to John Hawkinson.
785
786 - Define "new" domain record types if not found in arpa/nameserv.h.
787   Resulted from a suggestion from John Hawkinson (jhawk@mit.edu). Also
788   fixed an endian bug when printing mx record and added some new record
789   types.
790
791 - Added RIP V2 support. Thanks to Jeffrey Honig (jch@bsdi.com)
792
793 - Added T/TCP options printing. As suggested by Richard Stevens
794   (rstevens@noao.edu)
795
796 - Use autoconf to detect architectures that can't handle misaligned
797   accesses.
798
799 v3.1 Thu Jun 13 20:59:32 PDT 1996
800
801 - Changed u_int32/int32 to u_int32_t/int32_t to be consistent with bsd
802   and bind (as suggested by Charles Hannum).
803
804 - Port to GNU autoconf.
805
806 - Add support for printing DVMRP and PIM traffic thanks to
807   Havard Eidnes (Havard.Eidnes@runit.sintef.no).
808
809 - Fix AppleTalk, IPX and DECnet byte order problems due to wrong endian
810   define being referenced. Reported by Terry Kennedy.
811
812 - Minor fixes to the man page thanks to Mark Andrews.
813
814 - Endian fixes to RTP and vat packet dumpers, thanks to Bruce Mah
815   (bmah@cs.berkeley.edu).
816
817 - Added support for new dns types, thanks to Rainer Orth.
818
819 - Fixed tftp_print() to print the block number for ACKs.
820
821 - Document -dd and -ddd. Resulted from a bug report from Charlie Slater
822   (cslater@imatek.com).
823
824 - Check return status from malloc/calloc/etc.
825
826 - Check return status from pcap_loop() so we can print an error and
827   exit with a bad status if there were problems.
828
829 - Bail if ip option length is <= 0. Resulted from a bug report from
830   Darren Reed (darrenr@vitruvius.arbld.unimelb.edu.au).
831
832 - Print out a little more information for sun rpc packets.
833
834 - Add suport for Kerberos 4 thanks to John Hawkinson (jhawk@mit.edu).
835
836 - Fixed the Fix EXTRACT_SHORT() and EXTRACT_LONG() macros (which were
837   wrong on little endian machines).
838
839 - Fixed alignment bug in ipx_decode(). Thanks to Matt Crawford
840   (crawdad@fnal.gov).
841
842 - Fix ntp_print() to not print garbage when the stratum is
843   "unspecified." Thanks to Deus Ex Machina (root@belle.bork.com).
844
845 - Rewrote tcp options printer code to check for truncation. Added
846   selective acknowledgment case.
847
848 - Fixed an endian bug in the ospf printer. Thanks to Jeffrey C Honig
849   (jch@bsdi.com)
850
851 - Fix rip printer to handle 4.4 BSD sockaddr struct which only uses one
852   octet for the sa_family member. Thanks to Yoshitaka Tokugawa
853   (toku@dit.co.jp)
854
855 - Don't checksum ip header if we don't have all of it. Thanks to John
856   Hawkinson (jhawk@mit.edu).
857
858 - Print out hostnames if possible in egp printer. Thanks to Jeffrey
859   Honig (jhc@bsdi.com)
860
861
862 v3.1a1 Wed May  3 19:21:11 PDT 1995
863
864 - Include time.h when SVR4 is defined to avoid problems under Solaris
865   2.3.
866
867 - Fix etheraddr_string() in the ETHER_SERVICE to return the saved
868   strings, not the local buffer. Thanks to Stefan Petri
869   (petri@ibr.cs.tu-bs.de).
870
871 - Detect when pcap raises the snaplen (e.g. with snit). Print a warning
872   that the selected value was not used. Thanks to Pascal Hennequin
873   (Pascal.Hennequin@hugo.int-evry.fr).
874
875 - Add a truncated packet test to print-nfs.c. Thanks to Pascal Hennequin.
876
877 - BYTEORDER -> BYTE_ORDER Thanks to Terry Kennedy (terry@spcvxa.spc.edu).
878
879 v3.0.3 Sun Oct  1 18:35:00 GMT 1995
880
881 - Although there never was a 3.0.3 release, the linux boys cleverly
882   "released" one in late 1995.
883
884 v3.0.2 Thu Apr 20 21:28:16 PDT 1995
885
886 - Change configuration to not use gcc v2 flags with gcc v1.
887
888 - Redo gmt2local() so that it works under BSDI (which seems to return
889   an empty timezone struct from gettimeofday()). Based on report from
890   Terry Kennedy (terry@spcvxa.spc.edu).
891
892 - Change configure to recognize IP[0-9]* as "mips" SGI hardware. Based
893   on report from Mark Andrews (mandrews@alias.com).
894
895 - Don't pass cc flags to gcc. Resulted from a bug report from Rainer
896   Orth (ro@techfak.uni-bielefeld.de).
897
898 - Fixed printout of connection id for uncompressed tcp slip packets.
899   Resulted from a bug report from Richard Stevens (rstevens@noao.edu).
900
901 - Hack around deficiency in Ultrix's make.
902
903 - Add ETHERTYPE_TRAIL define which is missing from irix5.
904
905 v3.0.1 Wed Aug 31 22:42:26 PDT 1994
906
907 - Fix problems with gcc2 vs. malloc() and read() prototypes under SunOS 4.
908
909 v3.0 Mon Jun 20 19:23:27 PDT 1994
910
911 - Added support for printing tcp option timestamps thanks to
912   Mark Andrews (mandrews@alias.com).
913
914 - Reorganize protocol dumpers to take const pointers to packets so they
915   never change the contents (i.e., they used to do endian conversions
916   in place).  Previously, whenever more than one pass was taken over
917   the packet, the packet contents would be dumped incorrectly (i.e.,
918   the output form -x would be wrong on little endian machines because
919   the protocol dumpers would modify the data).  Thanks to Charles Hannum
920   (mycroft@gnu.ai.mit.edu) for reporting this problem.
921
922 - Added support for decnet protocol dumping thanks to Jeff Mogul
923   (mogul@pa.dec.com).
924
925 - Fix bug that caused length of packet to be incorrectly printed
926   (off by ether header size) for unknown ethernet types thanks
927   to Greg Miller (gmiller@kayak.mitre.org).
928
929 - Added support for IPX protocol dumping thanks to Brad Parker
930   (brad@fcr.com).
931
932 - Added check to verify IP header checksum under -v thanks to
933   Brad Parker (brad@fcr.com).
934
935 - Move packet capture code to new libpcap library (which is
936   packaged separately).
937
938 - Prototype everything and assume an ansi compiler.
939
940 - print-arp.c: Print hardware ethernet addresses if they're not
941   what we expect.
942
943 - print-bootp.c: Decode the cmu vendor field. Add RFC1497 tags.
944   Many helpful suggestions from Gordon Ross (gwr@jericho.mc.com).
945
946 - print-fddi.c: Improvements. Thanks to Jeffrey Mogul
947   (mogul@pa.dec.com).
948
949 - print-icmp.c: Byte swap netmask before printing. Thanks to
950   Richard Stevens (rstevens@noao.edu). Print icmp type when unknown.
951
952 - print-ip.c: Print the inner ip datagram of ip-in-ip encapsulated packets.
953   By default, only the inner packet is dumped, appended with the token
954   "(encap)".  Under -v, both the inner and output packets are dumped
955   (on the same line).  Note that the filter applies to the original packet,
956   not the encapsulated packet.  So if you run tcpdump on a net with an
957   IP Multicast tunnel, you cannot filter out the datagrams using the
958   conventional syntax.  (You can filter away all the ip-in-ip traffic
959   with "not ip proto 4".)
960
961 - print-nfs.c: Keep pending rpc's in circular table. Add generic
962   nfs header and remove os dependences. Thanks to Jeffrey Mogul.
963
964 - print-ospf.c: Improvements. Thanks to Jeffrey Mogul.
965
966 - tcpdump.c: Add -T flag allows interpretation of "vat", "wb", "rpc"
967   (sunrpc) and rtp packets. Added "inbound" and "outbound" keywords
968   Add && and || operators
969
970 v2.2.1 Tue Jun 6 17:57:22 PDT 1992
971
972 - Fix bug with -c flag.
973
974 v2.2 Fri May 22 17:19:41 PDT 1992
975
976 - savefile.c: Remove hack that shouldn't have been exported. Add
977   truncate checks.
978
979 - Added the 'icmp' keyword.  For example, 'icmp[0] != 8 and icmp[0] != 0'
980   matches non-echo/reply ICMP packets.
981
982 - Many improvements to filter code optimizer.
983
984 - Added 'multicast' keyword and extended the 'broadcast' keyword can now be
985   so that protocol qualifications are allowed. For example, "ip broadcast"
986   and "ether multicast" are valid filters.
987
988 - Added support for monitoring the loopback interface (i.e. 'tcpdump -i lo').
989   Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) contributed the kernel
990   patches to netinet/if_loop.c.
991
992 - Added support for the Ungermann-Bass Ethernet on IBM/PC-RTs running AOS.
993   Contact Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) for the diffs.
994
995 - Added EGP and OSPF printers, thanks to Jeffrey Honig.
996
997 v2.1 Tue Jan 28 11:00:14 PST 1992
998
999 - Internal release (never publically exported).
1000
1001 v2.0.1 Sun Jan 26 21:10:10 PDT
1002
1003 - Various byte ordering fixes.
1004
1005 - Add truncation checks.
1006
1007 - inet.c: Support BSD style SIOCGIFCONF.
1008
1009 - nametoaddr.c: Handle multi addresses for single host.
1010
1011 - optimize.c: Rewritten.
1012
1013 - pcap-bpf.c: don't choke when we get ptraced. only set promiscuous
1014   for broadcast nets.
1015
1016 - print-atal.c: Fix an alignment bug (thanks to
1017   stanonik@nprdc.navy.mil) Add missing printf() argument.
1018
1019 - print-bootp.c: First attempt at decoding the vendor buffer.
1020
1021 - print-domain.c: Fix truncation checks.
1022
1023 - print-icmp.c: Calculate length of packets from the ip header.
1024
1025 - print-ip.c: Print frag id in decimal (so it's easier to match up
1026   with non-frags). Add support for ospf, egp and igmp.
1027
1028 - print-nfs.c: Lots of changes.
1029
1030 - print-ntp.c: Make some verbose output depend on -v.
1031
1032 - print-snmp.c: New version from John LoVerso.
1033
1034 - print-tcp.c: Print rfc1072 tcp options.
1035
1036 - tcpdump.c: Print "0x" prefix for %x formats. Always print 6 digits
1037   (microseconds) worth of precision. Fix uid bugs.
1038
1039 - A packet dumper has been added (thanks to Jeff Mogul of DECWRL).
1040   With this option, you can create an architecture independent binary
1041   trace file in real time, without the overhead of the packet printer.
1042   At a later time, the packets can be filtered (again) and printed.
1043
1044 - BSD is supported.  You must have BPF in your kernel.
1045   Since the filtering is now done in the kernel, fewer packets are
1046   dropped.  In fact, with BPF and the packet dumper option, a measly
1047   Sun 3/50 can keep up with a busy network.
1048
1049 - Compressed SLIP packets can now be dumped, provided you use our
1050   SLIP software and BPF.  These packets are dumped as any other IP
1051   packet; the compressed headers are dumped with the '-e' option.
1052
1053 - Machines with little-endian byte ordering are supported (thanks to
1054   Jeff Mogul).
1055
1056 - Ultrix 4.0 is supported (also thanks to Jeff Mogul).
1057
1058 - IBM RT and Stanford Enetfilter support has been added by
1059   Rayan Zachariassen <rayan@canet.ca>.  Tcpdump has been tested under
1060   both the vanilla Enetfilter interface, and the extended interface
1061   (#ifdef'd by IBMRTPC) present in the MERIT version of the Enetfilter.
1062
1063 - TFTP packets are now printed (requests only).
1064
1065 - BOOTP packets are now printed.
1066
1067 - SNMP packets are now printed. (thanks to John LoVerso of Xylogics).
1068
1069 - Sparc architectures, including the Sparcstation-1, are now
1070   supported thanks to Steve McCanne and Craig Leres.
1071
1072 - SunOS 4 is now supported thanks to Micky Liu of Columbia
1073   University (micky@cunixc.cc.columbia.edu).
1074
1075 - IP options are now printed.
1076
1077 - RIP packets are now printed.
1078
1079 - There's a -v flag that prints out more information than the
1080   default (e.g., it will enable printing of IP ttl, tos and id)
1081   and -q flag that prints out less (e.g., it will disable
1082   interpretation of AppleTalk-in-UDP).
1083
1084 - The grammar has undergone substantial changes (if you have an
1085   earlier version of tcpdump, you should re-read the manual
1086   entry).
1087
1088   The most useful change is the addition of an expression
1089   syntax that lets you filter on arbitrary fields or values in the
1090   packet.  E.g., "ip[0] > 0x45" would print only packets with IP
1091   options, "tcp[13] & 3 != 0" would print only TCP SYN and FIN
1092   packets.
1093
1094   The most painful change is that concatenation no longer means
1095   "and" -- e.g., you have to say "host foo and port bar" instead
1096   of "host foo port bar".  The up side to this down is that
1097   repeated qualifiers can be omitted, making most filter
1098   expressions shorter.  E.g., you can now say "ip host foo and
1099   (bar or baz)" to look at ip traffic between hosts foo and bar or
1100   between hosts foo and baz.  [The old way of saying this was "ip
1101   host foo and (ip host bar or ip host baz)".]
1102
1103 v2.0 Sun Jan 13 12:20:40 PST 1991
1104
1105 - Initial public release.