]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - contrib/tcsh/sh.c
bhyvectl(8): Normalize the man page date
[FreeBSD/FreeBSD.git] / contrib / tcsh / sh.c
1 /*
2  * sh.c: Main shell routines
3  */
4 /*-
5  * Copyright (c) 1980, 1991 The Regents of the University of California.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the name of the University nor the names of its contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30  * SUCH DAMAGE.
31  */
32 #define EXTERN  /* Intern */
33 #include "sh.h"
34
35 #ifndef lint
36 char    copyright[] =
37 "@(#) Copyright (c) 1991 The Regents of the University of California.\n\
38  All rights reserved.\n";
39 #endif /* not lint */
40
41 #include "tc.h"
42 #include "ed.h"
43 #include "tw.h"
44
45 extern int MapsAreInited;
46 extern int NLSMapsAreInited;
47
48 /*
49  * C Shell
50  *
51  * Bill Joy, UC Berkeley, California, USA
52  * October 1978, May 1980
53  *
54  * Jim Kulp, IIASA, Laxenburg, Austria
55  * April 1980
56  *
57  * Filename recognition added:
58  * Ken Greer, Ind. Consultant, Palo Alto CA
59  * October 1983.
60  *
61  * Karl Kleinpaste, Computer Consoles, Inc.
62  * Added precmd, periodic/tperiod, prompt changes,
63  * directory stack hack, and login watch.
64  * Sometime March 1983 - Feb 1984.
65  *
66  * Added scheduled commands, including the "sched" command,
67  * plus the call to sched_run near the precmd et al
68  * routines.
69  * Upgraded scheduled events for running events while
70  * sitting idle at command input.
71  *
72  * Paul Placeway, Ohio State
73  * added stuff for running with twenex/inputl  9 Oct 1984.
74  *
75  * ported to Apple Unix (TM) (OREO)  26 -- 29 Jun 1987
76  */
77
78 jmp_buf_t reslab IZERO_STRUCT;
79 struct wordent paraml IZERO_STRUCT;
80
81 static const char tcshstr[] = "tcsh";
82
83 struct sigaction parintr;       /* Parents interrupt catch */
84 struct sigaction parterm;       /* Parents terminate catch */
85
86 #ifdef TESLA
87 int do_logout = 0;
88 #endif /* TESLA */
89
90
91 int    use_fork = 0;            /* use fork() instead of vfork()? */
92
93 /*
94  * Magic pointer values. Used to specify other invalid conditions aside
95  * from null.
96  */
97 static Char     INVCHAR;
98 Char    *INVPTR = &INVCHAR;
99 Char    **INVPPTR = &INVPTR;
100
101 static int    fast = 0;
102 static int    mflag = 0;
103 static int    prompt = 1;
104 int     enterhist = 0;
105 int    tellwhat = 0;
106 time_t  t_period;
107 Char  *ffile = NULL;
108 int     dolzero = 0;
109 int     insource = 0;
110 int     exitset = 0;
111 static time_t  chktim;          /* Time mail last checked */
112 char *progname;
113 int tcsh;
114
115 /*
116  * This preserves the input state of the shell. It is used by
117  * st_save and st_restore to manupulate shell state.
118  */
119 struct saved_state {
120     int           insource;
121     int           OLDSTD;
122     int           SHIN;
123     int           SHOUT;
124     int           SHDIAG;
125     int           intty;
126     struct whyle *whyles;
127     Char         *gointr;
128     Char         *arginp;
129     Char         *evalp;
130     Char        **evalvec;
131     Char         *alvecp;
132     Char        **alvec;
133     int           onelflg;
134     int   enterhist;
135     Char        **argv;
136     Char        **av;
137     Char          HIST;
138     int   cantell;
139     struct Bin    B;
140     int           justpr;
141 };
142
143 static  int               srccat        (Char *, Char *);
144 #ifndef WINNT_NATIVE
145 static  int               srcfile       (const char *, int, int, Char **);
146 #else
147 int               srcfile       (const char *, int, int, Char **);
148 #endif /*WINNT_NATIVE*/
149 static  void              srcunit       (int, int, int, Char **);
150 static  void              mailchk       (void);
151 #ifndef _PATH_DEFPATH
152 static  Char            **defaultpath   (void);
153 #endif
154 static  void              record        (void);
155 static  void              st_save       (struct saved_state *, int, int,
156                                          Char **, Char **);
157 static  void              st_restore    (void *);
158
159         int               main          (int, char **);
160
161 #ifndef LOCALEDIR
162 #define LOCALEDIR "/usr/share/locale"
163 #endif
164
165 #ifdef NLS_CATALOGS
166 static void
167 add_localedir_to_nlspath(const char *path)
168 {
169     static const char msgs_LOC[] = "/%L/LC_MESSAGES/%N.cat";
170     static const char msgs_lang[] = "/%l/LC_MESSAGES/%N.cat";
171     char *old;
172     char *new, *new_p;
173     size_t len;
174     int add_LOC = 1;
175     int add_lang = 1;
176     char trypath[MAXPATHLEN];
177     struct stat st;
178
179     if (path == NULL)
180         return;
181
182     (void) xsnprintf(trypath, sizeof(trypath), "%s/en/LC_MESSAGES/tcsh.cat",
183         path);
184     if (stat(trypath, &st) == -1)
185         return;
186
187     if ((old = getenv("NLSPATH")) != NULL)
188         len = strlen(old) + 1;  /* don't forget the colon. */
189     else
190         len = 0;
191
192     len += 2 * strlen(path) +
193            sizeof(msgs_LOC) + sizeof(msgs_lang); /* includes the extra colon */
194
195     new = new_p = xcalloc(len, 1);
196
197     if (old != NULL) {
198         size_t pathlen = strlen(path);
199         char *old_p;
200
201         (void) xsnprintf(new_p, len, "%s", old);
202         new_p += strlen(new_p);
203         len -= new_p - new;
204
205         /* Check if the paths we try to add are already present in NLSPATH.
206            If so, note it by setting the appropriate flag to 0. */
207         for (old_p = old; old_p; old_p = strchr(old_p, ':'),
208                                  old_p = old_p ? old_p + 1 : NULL) {
209             if (strncmp(old_p, path, pathlen) != 0)
210                 continue;
211             if (strncmp(old_p + pathlen, msgs_LOC, sizeof(msgs_LOC) - 1) == 0)
212                 add_LOC = 0;
213             else if (strncmp(old_p + pathlen, msgs_lang,
214                               sizeof(msgs_lang) - 1) == 0)
215                 add_lang = 0;
216         }
217     }
218
219     /* Add the message catalog paths not already present to NLSPATH. */
220     if (add_LOC || add_lang)
221         (void) xsnprintf(new_p, len, "%s%s%s%s%s%s",
222                          old ? ":" : "",
223                          add_LOC ? path : "", add_LOC ? msgs_LOC : "",
224                          add_LOC && add_lang ? ":" : "",
225                          add_lang ? path : "", add_lang ? msgs_lang : "");
226
227     tsetenv(STRNLSPATH, str2short(new));
228     free(new);
229 }
230 #endif
231
232 int
233 main(int argc, char **argv)
234 {
235     int batch = 0;
236     volatile int nexececho = 0;
237     int nofile = 0;
238     volatile int nverbose = 0;
239     volatile int rdirs = 0;
240     volatile int exitcode = 0;
241     int quitit = 0;
242     Char *cp;
243 #ifdef AUTOLOGOUT
244     Char *cp2;
245 #endif
246     char *tcp, *ttyn;
247     int f, reenter;
248     char **tempv;
249     static const char *targinp = NULL;
250     int osetintr;
251     struct sigaction oparintr;
252
253 #ifdef WINNT_NATIVE
254     nt_init();
255 #endif /* WINNT_NATIVE */
256
257     (void)memset(&reslab, 0, sizeof(reslab));
258 #if defined(NLS_CATALOGS) && defined(LC_MESSAGES)
259     (void) setlocale(LC_MESSAGES, "");
260 #endif /* NLS_CATALOGS && LC_MESSAGES */
261
262 #ifdef NLS
263 # ifdef LC_CTYPE
264     (void) setlocale(LC_CTYPE, ""); /* for iscntrl */
265 # endif /* LC_CTYPE */
266 #endif /* NLS */
267
268     STR_environ = blk2short(environ);
269     environ = short2blk(STR_environ);   /* So that we can free it */
270
271 #ifdef NLS_CATALOGS
272     add_localedir_to_nlspath(LOCALEDIR);
273 #endif
274
275     nlsinit();
276     initlex(&paraml);
277
278 #ifdef MALLOC_TRACE
279     mal_setstatsfile(fdopen(dmove(xopen("/tmp/tcsh.trace", 
280         O_WRONLY|O_CREAT|O_LARGEFILE, 0666), 25), "w"));
281     mal_trace(1);
282 #endif /* MALLOC_TRACE */
283
284 #if !(defined(BSDTIMES) || defined(_SEQUENT_)) && defined(POSIX)
285 # ifdef _SC_CLK_TCK
286     clk_tck = (clock_t) sysconf(_SC_CLK_TCK);
287 # else /* ! _SC_CLK_TCK */
288 #  ifdef CLK_TCK
289     clk_tck = CLK_TCK;
290 #  else /* !CLK_TCK */
291     clk_tck = HZ;
292 #  endif /* CLK_TCK */
293 # endif /* _SC_CLK_TCK */
294 #endif /* !BSDTIMES && POSIX */
295
296     settimes();                 /* Immed. estab. timing base */
297 #ifdef TESLA
298     do_logout = 0;
299 #endif /* TESLA */
300
301     /*
302      * Make sure we have 0, 1, 2 open
303      * Otherwise `` jobs will not work... (From knaff@poly.polytechnique.fr)
304      */
305     {
306         do 
307             if ((f = xopen(_PATH_DEVNULL, O_RDONLY|O_LARGEFILE)) == -1 &&
308                 (f = xopen("/", O_RDONLY|O_LARGEFILE)) == -1) 
309                 exit(1);
310         while (f < 3);
311         xclose(f);
312     }
313
314     osinit();                   /* Os dependent initialization */
315
316     
317     {
318         char *t;
319
320         t = strrchr(argv[0], '/');
321 #ifdef WINNT_NATIVE
322         {
323             char *s = strrchr(argv[0], '\\');
324             if (s)
325                 t = s;
326         }
327 #endif /* WINNT_NATIVE */
328         t = t ? t + 1 : argv[0];
329         if (*t == '-') t++;
330         progname = strsave((t && *t) ? t : tcshstr);    /* never want a null */
331         tcsh = strncmp(progname, tcshstr, sizeof(tcshstr) - 1) == 0;
332     }
333
334     /*
335      * Initialize non constant strings
336      */
337 #ifdef _PATH_BSHELL
338     STR_BSHELL = SAVE(_PATH_BSHELL);
339 #endif
340 #ifdef _PATH_TCSHELL
341     STR_SHELLPATH = SAVE(_PATH_TCSHELL);
342 #else
343 # ifdef _PATH_CSHELL
344     STR_SHELLPATH = SAVE(_PATH_CSHELL);
345 # endif
346 #endif
347     STR_WORD_CHARS = SAVE(WORD_CHARS);
348     STR_WORD_CHARS_VI = SAVE(WORD_CHARS_VI);
349
350     HIST = '!';
351     HISTSUB = '^';
352     PRCH = tcsh ? '>' : '%';    /* to replace %# in $prompt for normal users */
353     PRCHROOT = '#';             /* likewise for root */
354     word_chars = STR_WORD_CHARS;
355     bslash_quote = 0;           /* PWP: do tcsh-style backslash quoting? */
356     anyerror = 1;               /* for compatibility */
357     setcopy(STRanyerror, STRNULL, VAR_READWRITE);
358
359     /* Default history size to 100 */
360     setcopy(STRhistory, str2short("100"), VAR_READWRITE);
361     sethistory(100);
362
363     tempv = argv;
364     ffile = SAVE(tempv[0]);
365     dolzero = 0;
366     if (eq(ffile, STRaout))     /* A.out's are quittable */
367         quitit = 1;
368     uid = getuid();
369     gid = getgid();
370     euid = geteuid();
371     egid = getegid();
372     /*
373      * We are a login shell if: 1. we were invoked as -<something> with
374      * optional arguments 2. or we were invoked only with the -l flag
375      */
376     loginsh = (**tempv == '-') || (argc == 2 &&
377                                    tempv[1][0] == '-' && tempv[1][1] == 'l' &&
378                                                 tempv[1][2] == '\0');
379 #ifdef _VMS_POSIX
380     /* No better way to find if we are a login shell */
381     if (!loginsh) {
382         loginsh = (argc == 1 && getppid() == 1);
383         **tempv = '-';  /* Avoid giving VMS an acidic stomach */
384     }
385 #endif /* _VMS_POSIX */
386
387     if (loginsh && **tempv != '-') {
388         char *argv0;
389
390         /*
391          * Mangle the argv space
392          */
393         tempv[1][0] = '\0';
394         tempv[1][1] = '\0';
395         tempv[1] = NULL;
396         argv0 = strspl("-", *tempv);
397         *tempv = argv0;
398         argc--;
399     }
400     if (loginsh) {
401         (void) time(&chktim);
402         setNS(STRloginsh);
403     }
404
405     NoNLSRebind = getenv("NOREBIND") != NULL;
406 #ifdef NLS
407 # ifdef SETLOCALEBUG
408     dont_free = 1;
409 # endif /* SETLOCALEBUG */
410     (void) setlocale(LC_ALL, "");
411 # ifdef LC_COLLATE
412     (void) setlocale(LC_COLLATE, "");
413 # endif
414 # ifdef SETLOCALEBUG
415     dont_free = 0;
416 # endif /* SETLOCALEBUG */
417 # ifdef STRCOLLBUG
418     fix_strcoll_bug();
419 # endif /* STRCOLLBUG */
420
421     /*
422      * On solaris ISO8859-1 contains no printable characters in the upper half
423      * so we need to test only for MB_CUR_MAX == 1, otherwise for multi-byte
424      * locales we are always AsciiOnly == 0.
425      */
426     if (MB_CUR_MAX == 1) {
427         int     k;
428
429         for (k = 0200; k <= 0377 && !isprint(CTL_ESC(k)); k++)
430             continue;
431         AsciiOnly = k > 0377;
432     } else
433         AsciiOnly = 0;
434 #else
435     AsciiOnly = getenv("LANG") == NULL && getenv("LC_CTYPE") == NULL;
436 #endif                          /* NLS */
437     if (MapsAreInited && !NLSMapsAreInited)
438         ed_InitNLSMaps();
439     ResetArrowKeys();
440
441     /*
442      * Initialize for periodic command intervals. Also, initialize the dummy
443      * tty list for login-watch.
444      */
445     (void) time(&t_period);
446 #ifndef HAVENOUTMP
447     initwatch();
448 #endif /* !HAVENOUTMP */
449
450 #if defined(alliant)
451     /*
452      * From:  Jim Pace <jdp@research.att.com>
453      * tcsh does not work properly on the alliants through an rlogin session.
454      * The shell generally hangs.  Also, reference to the controlling terminal
455      * does not work ( ie: echo foo > /dev/tty ).
456      *
457      * A security feature was added to rlogind affecting FX/80's Concentrix
458      * from revision 5.5.xx upwards (through 5.7 where this fix was implemented)
459      * This security change also affects the FX/2800 series.
460      * The security change to rlogind requires the process group of an rlogin
461      * session become disassociated with the tty in rlogind.
462      *
463      * The changes needed are:
464      * 1. set the process group
465      * 2. reenable the control terminal
466      */
467      if (loginsh && isatty(SHIN)) {
468          ttyn = ttyname(SHIN);
469          xclose(SHIN);
470          SHIN = xopen(ttyn, O_RDWR|O_LARGEFILE);
471          shpgrp = getpid();
472          (void) ioctl (SHIN, TIOCSPGRP, (ioctl_t) &shpgrp);
473          (void) setpgid(0, shpgrp);
474      }
475 #endif /* alliant */
476
477     /*
478      * Move the descriptors to safe places. The variable didfds is 0 while we
479      * have only FSH* to work with. When didfds is true, we have 0,1,2 and
480      * prefer to use these.
481      */
482     initdesc();
483
484     cdtohome = 1;
485     setv(STRcdtohome, SAVE(""), VAR_READWRITE);
486
487     /*
488      * Get and set the tty now
489      */
490     if ((ttyn = ttyname(SHIN)) != NULL) {
491         /*
492          * Could use rindex to get rid of other possible path components, but
493          * hpux preserves the subdirectory /pty/ when storing the tty name in
494          * utmp, so we keep it too.
495          */
496         if (strncmp(ttyn, "/dev/", 5) == 0)
497             setv(STRtty, cp = SAVE(ttyn + 5), VAR_READWRITE);
498         else
499             setv(STRtty, cp = SAVE(ttyn), VAR_READWRITE);
500     }
501     else
502         setv(STRtty, cp = SAVE(""), VAR_READWRITE);
503
504     /*
505      * Initialize the shell variables. ARGV and PROMPT are initialized later.
506      * STATUS is also munged in several places. CHILD is munged when
507      * forking/waiting
508      */
509
510     /*
511      * 7-10-87 Paul Placeway autologout should be set ONLY on login shells and
512      * on shells running as root.  Out of these, autologout should NOT be set
513      * for any psudo-terminals (this catches most window systems) and not for
514      * any terminal running X windows.
515      * 
516      * At Ohio State, we have had problems with a user having his X session 
517      * drop out from under him (on a Sun) because the shell in his master 
518      * xterm timed out and exited.
519      * 
520      * Really, this should be done with a program external to the shell, that
521      * watches for no activity (and NO running programs, such as dump) on a
522      * terminal for a long peroid of time, and then SIGHUPS the shell on that
523      * terminal.
524      * 
525      * bugfix by Rich Salz <rsalz@PINEAPPLE.BBN.COM>: For root rsh things 
526      * allways first check to see if loginsh or really root, then do things 
527      * with ttyname()
528      * 
529      * Also by Jean-Francois Lamy <lamy%ai.toronto.edu@RELAY.CS.NET>: check the
530      * value of cp before using it! ("root can rsh too")
531      * 
532      * PWP: keep the nested ifs; the order of the tests matters and a good 
533      * (smart) C compiler might re-arange things wrong.
534      */
535 #ifdef AUTOLOGOUT
536 # ifdef convex
537     if (uid == 0)
538         /*  root always has a 15 minute autologout  */
539         setcopy(STRautologout, STRrootdefautologout, VAR_READWRITE);
540     else
541         if (loginsh)
542             /*  users get autologout set to 0  */
543             setcopy(STRautologout, STR0, VAR_READWRITE);
544 # else /* convex */
545     if (loginsh || (uid == 0)) {
546         if (*cp) {
547             /* only for login shells or root and we must have a tty */
548             if (((cp2 = Strrchr(cp, (Char) '/')) != NULL) &&
549                 (Strncmp(cp, STRptssl, 3) != 0)) {
550                 cp2 = cp2 + 1;
551             }
552             else
553                 cp2 = cp;
554             if (!(((Strncmp(cp2, STRtty, 3) == 0) && Isalpha(cp2[3])) ||
555                   Strstr(cp, STRptssl) != NULL)) {
556                 if (getenv("DISPLAY") == NULL) {
557                     /* NOT on X window shells */
558                     setcopy(STRautologout, STRdefautologout, VAR_READWRITE);
559                 }
560             }
561         }
562     }
563 # endif /* convex */
564 #endif /* AUTOLOGOUT */
565
566     sigset_interrupting(SIGALRM, queue_alrmcatch);
567
568     setcopy(STRstatus, STR0, VAR_READWRITE);
569
570     /*
571      * get and set machine specific environment variables
572      */
573     getmachine();
574
575
576     /*
577      * Publish the selected echo style
578      */
579 #if ECHO_STYLE != BSD_ECHO
580     if (tcsh) {
581 # if ECHO_STYLE == NONE_ECHO
582         setcopy(STRecho_style, STRnone, VAR_READWRITE);
583 # endif /* ECHO_STYLE == NONE_ECHO */
584 # if ECHO_STYLE == SYSV_ECHO
585         setcopy(STRecho_style, STRsysv, VAR_READWRITE);
586 # endif /* ECHO_STYLE == SYSV_ECHO */
587 # if ECHO_STYLE == BOTH_ECHO
588         setcopy(STRecho_style, STRboth, VAR_READWRITE);
589 # endif /* ECHO_STYLE == BOTH_ECHO */
590     } else
591 #endif /* ECHO_STYLE != BSD_ECHO */
592         setcopy(STRecho_style, STRbsd, VAR_READWRITE);
593
594     /*
595      * increment the shell level.
596      */
597     shlvl(1);
598
599 #ifdef __ANDROID__
600     /* On Android, $HOME either isn't set or set to /data, a R/O location.
601        Check for the environment variable EXTERNAL_STORAGE, which contains
602        the mount point of the external storage (SD card, mostly).  If
603        EXTERNAL_STORAGE isn't set fall back to "/sdcard".  Eventually
604        override $HOME so the environment is on the same page. */
605     if (((tcp = getenv("HOME")) != NULL && strcmp (tcp, "/data") != 0)
606         || (tcp = getenv("EXTERNAL_STORAGE")) != NULL) {
607         cp = quote(SAVE(tcp));
608     } else
609         cp = quote(SAVE("/sdcard"));
610     tsetenv(STRKHOME, cp);
611 #else
612     if ((tcp = getenv("HOME")) != NULL)
613         cp = quote(SAVE(tcp));
614     else
615         cp = NULL;
616 #endif
617
618     if (cp == NULL)
619         fast = 1;               /* No home -> can't read scripts */
620     else
621         setv(STRhome, cp, VAR_READWRITE);
622
623     dinit(cp);                  /* dinit thinks that HOME == cwd in a login
624                                  * shell */
625     /*
626      * Grab other useful things from the environment. Should we grab
627      * everything??
628      */
629     {
630         char *cln, *cus, *cgr;
631         struct passwd *pw;
632         struct group *gr;
633
634
635 #ifdef apollo
636         int     oid = getoid();
637
638         setv(STRoid, Itoa(oid, 0, 0), VAR_READWRITE);
639 #endif /* apollo */
640
641         setv(STReuid, Itoa(euid, 0, 0), VAR_READWRITE);
642         if ((pw = xgetpwuid(euid)) == NULL)
643             setcopy(STReuser, STRunknown, VAR_READWRITE);
644         else
645             setcopy(STReuser, str2short(pw->pw_name), VAR_READWRITE);
646
647         setv(STRuid, Itoa(uid, 0, 0), VAR_READWRITE);
648
649         setv(STRgid, Itoa(gid, 0, 0), VAR_READWRITE);
650
651         cln = getenv("LOGNAME");
652         cus = getenv("USER");
653         if (cus != NULL)
654             setv(STRuser, quote(SAVE(cus)), VAR_READWRITE);
655         else if (cln != NULL)
656             setv(STRuser, quote(SAVE(cln)), VAR_READWRITE);
657         else if ((pw = xgetpwuid(uid)) == NULL)
658             setcopy(STRuser, STRunknown, VAR_READWRITE);
659         else
660             setcopy(STRuser, str2short(pw->pw_name), VAR_READWRITE);
661         if (cln == NULL)
662             tsetenv(STRLOGNAME, varval(STRuser));
663         if (cus == NULL)
664             tsetenv(STRKUSER, varval(STRuser));
665         
666         cgr = getenv("GROUP");
667         if (cgr != NULL)
668             setv(STRgroup, quote(SAVE(cgr)), VAR_READWRITE);
669         else if ((gr = xgetgrgid(gid)) == NULL)
670             setcopy(STRgroup, STRunknown, VAR_READWRITE);
671         else
672             setcopy(STRgroup, str2short(gr->gr_name), VAR_READWRITE);
673         if (cgr == NULL)
674             tsetenv(STRKGROUP, varval(STRgroup));
675     }
676
677     /*
678      * HOST may be wrong, since rexd transports the entire environment on sun
679      * 3.x Just set it again
680      */
681     {
682         char    cbuff[MAXHOSTNAMELEN];
683
684         if (gethostname(cbuff, sizeof(cbuff)) >= 0) {
685             cbuff[sizeof(cbuff) - 1] = '\0';    /* just in case */
686             tsetenv(STRHOST, str2short(cbuff));
687         }
688         else
689             tsetenv(STRHOST, STRunknown);
690     }
691
692
693 #ifdef REMOTEHOST
694     /*
695      * Try to determine the remote host we were logged in from.
696      */
697     remotehost();
698 #endif /* REMOTEHOST */
699  
700 #ifdef apollo
701     if ((tcp = getenv("SYSTYPE")) == NULL)
702         tcp = "bsd4.3";
703     tsetenv(STRSYSTYPE, quote(str2short(tcp)));
704 #endif /* apollo */
705
706     /*
707      * set editing on by default, unless running under Emacs as an inferior
708      * shell.
709      * We try to do this intelligently. If $TERM is available, then it
710      * should determine if we should edit or not. $TERM is preserved
711      * across rlogin sessions, so we will not get confused if we rlogin
712      * under an emacs shell. Another advantage is that if we run an
713      * xterm under an emacs shell, then the $TERM will be set to 
714      * xterm, so we are going to want to edit. Unfortunately emacs
715      * does not restore all the tty modes, so xterm is not very well
716      * set up. But this is not the shell's fault.
717      * Also don't edit if $TERM == wm, for when we're running under an ATK app.
718      * Finally, emacs compiled under terminfo, sets the terminal to dumb,
719      * so disable editing for that too.
720      * 
721      * Unfortunately, in some cases the initial $TERM setting is "unknown",
722      * "dumb", or "network" which is then changed in the user's startup files.
723      * We fix this by setting noediting here if $TERM is unknown/dumb and
724      * if noediting is set, we switch on editing if $TERM is changed.
725      */
726     if ((tcp = getenv("TERM")) != NULL) {
727         setv(STRterm, quote(SAVE(tcp)), VAR_READWRITE);
728         noediting = strcmp(tcp, "unknown") == 0 || strcmp(tcp, "dumb") == 0 ||
729                     strcmp(tcp, "network") == 0;
730         editing = strcmp(tcp, "emacs") != 0 && strcmp(tcp, "wm") != 0 &&
731                   !noediting;
732     }
733     else {
734         noediting = 0;
735         editing = ((tcp = getenv("EMACS")) == NULL || strcmp(tcp, "t") != 0);
736     }
737
738     /* 
739      * The 'edit' variable is either set or unset.  It doesn't 
740      * need a value.  Making it 'emacs' might be confusing. 
741      */
742     if (editing)
743         setNS(STRedit);
744
745
746     /*
747      * still more mutability: make the complete routine automatically add the
748      * suffix of file names...
749      */
750     setNS(STRaddsuffix);
751
752     /*
753      * Compatibility with tcsh >= 6.12 by default
754      */
755     setNS(STRcsubstnonl);
756     
757     /*
758      * Random default kill ring size
759      */
760     setcopy(STRkillring, str2short("30"), VAR_READWRITE);
761
762     /*
763      * Re-initialize path if set in environment
764      */
765     if ((tcp = getenv("PATH")) == NULL)
766 #ifdef _PATH_DEFPATH
767         importpath(str2short(_PATH_DEFPATH));
768 #else /* !_PATH_DEFPATH */
769         setq(STRpath, defaultpath(), &shvhed, VAR_READWRITE);
770 #endif /* _PATH_DEFPATH */
771     else
772         /* Importpath() allocates memory for the path, and the
773          * returned pointer from SAVE() was discarded, so
774          * this was a memory leak.. (sg)
775          *
776          * importpath(SAVE(tcp));
777          */
778         importpath(str2short(tcp));
779
780
781     {
782         /* If the SHELL environment variable ends with "tcsh", set
783          * STRshell to the same path.  This is to facilitate using
784          * the executable in environments where the compiled-in
785          * default isn't appropriate (sg).
786          */
787
788         size_t sh_len = 0;
789
790         if ((tcp = getenv("SHELL")) != NULL) {
791             sh_len = strlen(tcp);
792             if ((sh_len >= 5 && strcmp(tcp + (sh_len - 5), "/tcsh") == 0) || 
793                 (!tcsh && sh_len >= 4 && strcmp(tcp + (sh_len - 4), "/csh") == 0))
794                 setv(STRshell, quote(SAVE(tcp)), VAR_READWRITE);
795             else
796                 sh_len = 0;
797         }
798         if (sh_len == 0)
799             setcopy(STRshell, STR_SHELLPATH, VAR_READWRITE);
800     }
801
802 #ifdef _OSD_POSIX  /* BS2000 needs this variable set to "SHELL" */
803     if ((tcp = getenv("PROGRAM_ENVIRONMENT")) == NULL)
804         tcp = "SHELL";
805     tsetenv(STRPROGRAM_ENVIRONMENT, quote(str2short(tcp)));
806 #endif /* _OSD_POSIX */
807
808 #ifdef COLOR_LS_F
809     if ((tcp = getenv("LS_COLORS")) != NULL)
810         parseLS_COLORS(str2short(tcp));
811     if ((tcp = getenv("LSCOLORS")) != NULL)
812         parseLSCOLORS(str2short(tcp));
813 #endif /* COLOR_LS_F */
814
815     mainpid = getpid();
816     doldol = putn((tcsh_number_t)mainpid);      /* For $$ */
817 #ifdef WINNT_NATIVE
818     {
819         char *tmp;
820         Char *tmp2;
821         if ((tmp = getenv("TMP")) != NULL) {
822             tmp = xasprintf("%s/%s", tmp, "sh");
823             tmp2 = SAVE(tmp);
824             xfree(tmp);
825         }
826         else {
827             tmp2 = SAVE(""); 
828         }
829         shtemp = Strspl(tmp2, doldol);  /* For << */
830         xfree(tmp2);
831     }
832 #else /* !WINNT_NATIVE */
833 #ifdef HAVE_MKSTEMP
834     {
835         const char *tmpdir = getenv ("TMPDIR");
836         if (!tmpdir)
837             tmpdir = "/tmp";
838         shtemp = Strspl(SAVE(tmpdir), SAVE("/sh" TMP_TEMPLATE)); /* For << */
839     }
840 #else /* !HAVE_MKSTEMP */
841     shtemp = Strspl(STRtmpsh, doldol);  /* For << */
842 #endif /* HAVE_MKSTEMP */
843 #endif /* WINNT_NATIVE */
844
845     /*
846      * Record the interrupt states from the parent process. If the parent is
847      * non-interruptible our hand must be forced or we (and our children) won't
848      * be either. Our children inherit termination from our parent. We catch it
849      * only if we are the login shell.
850      */
851     sigaction(SIGINT, NULL, &parintr);
852     sigaction(SIGTERM, NULL, &parterm);
853
854
855 #ifdef TCF
856     /* Enable process migration on ourselves and our progeny */
857     (void) signal(SIGMIGRATE, SIG_DFL);
858 #endif /* TCF */
859
860     /*
861      * dspkanji/dspmbyte autosetting
862      */
863     /* PATCH IDEA FROM Issei.Suzuki VERY THANKS */
864 #if defined(DSPMBYTE)
865 #if defined(NLS) && defined(LC_CTYPE)
866     if (((tcp = setlocale(LC_CTYPE, NULL)) != NULL || (tcp = getenv("LANG")) != NULL) && !adrof(CHECK_MBYTEVAR))
867 #else
868     if ((tcp = getenv("LANG")) != NULL && !adrof(CHECK_MBYTEVAR))
869 #endif
870     {
871         autoset_dspmbyte(str2short(tcp));
872     }
873 #if defined(WINNT_NATIVE)
874     else if (!adrof(CHECK_MBYTEVAR))
875       nt_autoset_dspmbyte();
876 #endif /* WINNT_NATIVE */
877 #endif
878 #if defined(AUTOSET_KANJI) 
879 # if defined(NLS) && defined(LC_CTYPE)
880     if (setlocale(LC_CTYPE, NULL) != NULL || getenv("LANG") != NULL)
881 # else
882     if (getenv("LANG") != NULL)
883 # endif
884         autoset_kanji();
885 #endif /* AUTOSET_KANJI */
886     fix_version();              /* publish the shell version */
887
888     if (argc > 1 && strcmp(argv[1], "--version") == 0) {
889         xprintf("%S\n", varval(STRversion));
890         xexit(0);
891     }
892     if (argc > 1 && strcmp(argv[1], "--help") == 0) {
893         xprintf("%S\n\n", varval(STRversion));
894         xprintf("%s", CGETS(11, 8, HELP_STRING));
895         xexit(0);
896     }
897     /*
898      * Process the arguments.
899      * 
900      * Note that processing of -v/-x is actually delayed till after script
901      * processing.
902      * 
903      * We set the first character of our name to be '-' if we are a shell 
904      * running interruptible commands.  Many programs which examine ps'es 
905      * use this to filter such shells out.
906      */
907     argc--, tempv++;
908     while (argc > 0 && (tcp = tempv[0])[0] == '-' &&
909            *++tcp != '\0' && !batch) {
910         do
911             switch (*tcp++) {
912
913             case 0:             /* -    Interruptible, no prompt */
914                 prompt = 0;
915                 setintr = 1;
916                 nofile = 1;
917                 break;
918
919             case 'b':           /* -b   Next arg is input file */
920                 batch = 1;
921                 break;
922
923             case 'c':           /* -c   Command input from arg */
924                 if (argc == 1)
925                     xexit(0);
926                 argc--, tempv++;
927 #ifdef M_XENIX
928                 /* Xenix Vi bug:
929                    it relies on a 7 bit environment (/bin/sh), so it
930                    pass ascii arguments with the 8th bit set */
931                 if (!strcmp(argv[0], "sh"))
932                   {
933                     char *p;
934
935                     for (p = tempv[0]; *p; ++p)
936                       *p &= ASCII;
937                   }
938 #endif
939                 targinp = tempv[0];
940                 prompt = 0;
941                 nofile = 1;
942                 break;
943             case 'd':           /* -d   Load directory stack from file */
944                 rdirs = 1;
945                 break;
946
947 #ifdef apollo
948             case 'D':           /* -D   Define environment variable */
949                 {
950                     Char *dp;
951
952                     cp = str2short(tcp);
953                     if (dp = Strchr(cp, '=')) {
954                         *dp++ = '\0';
955                         tsetenv(cp, dp);
956                     }
957                     else
958                         tsetenv(cp, STRNULL);
959                 }
960                 *tcp = '\0';    /* done with this argument */
961                 break;
962 #endif /* apollo */
963
964             case 'e':           /* -e   Exit on any error */
965                 exiterr = 1;
966                 break;
967
968             case 'f':           /* -f   Fast start */
969                 fast = 1;
970                 break;
971
972             case 'i':           /* -i   Interactive, even if !intty */
973                 intact = 1;
974                 nofile = 1;
975                 break;
976
977             case 'm':           /* -m   read .cshrc (from su) */
978                 mflag = 1;
979                 break;
980
981             case 'n':           /* -n   Don't execute */
982                 noexec = 1;
983                 break;
984
985             case 'q':           /* -q   (Undoc'd) ... die on quit */
986                 quitit = 1;
987                 break;
988
989             case 's':           /* -s   Read from std input */
990                 nofile = 1;
991                 break;
992
993             case 't':           /* -t   Read one line from input */
994                 onelflg = 2;
995                 prompt = 0;
996                 nofile = 1;
997                 break;
998
999             case 'v':           /* -v   Echo hist expanded input */
1000                 nverbose = 1;   /* ... later */
1001                 break;
1002
1003             case 'x':           /* -x   Echo just before execution */
1004                 nexececho = 1;  /* ... later */
1005                 break;
1006
1007             case 'V':           /* -V   Echo hist expanded input */
1008                 setNS(STRverbose);      /* NOW! */
1009                 break;
1010
1011             case 'X':           /* -X   Echo just before execution */
1012                 setNS(STRecho); /* NOW! */
1013                 break;
1014
1015             case 'F':
1016                 /*
1017                  * This will cause children to be created using fork instead of
1018                  * vfork.
1019                  */
1020                 use_fork = 1;
1021                 break;
1022
1023             case ' ':
1024             case '\t':
1025             case '\r':
1026             case '\n':
1027                 /* 
1028                  * for O/S's that don't do the argument parsing right in 
1029                  * "#!/foo -f " scripts
1030                  */
1031                 break;
1032
1033             default:            /* Unknown command option */
1034                 exiterr = 1;
1035                 stderror(ERR_TCSHUSAGE, tcp-1, progname);
1036                 break;
1037
1038         } while (*tcp);
1039         tempv++, argc--;
1040     }
1041
1042     if (quitit)                 /* With all due haste, for debugging */
1043         (void) signal(SIGQUIT, SIG_DFL);
1044
1045     /*
1046      * Unless prevented by -, -c, -i, -s, or -t, if there are remaining
1047      * arguments the first of them is the name of a shell file from which to
1048      * read commands.
1049      */
1050     if (nofile == 0 && argc > 0) {
1051         nofile = xopen(tempv[0], O_RDONLY|O_LARGEFILE);
1052         if (nofile < 0) {
1053             child = 1;          /* So this ... */
1054             /* ... doesn't return */
1055             stderror(ERR_SYSTEM, tempv[0], strerror(errno));
1056         }
1057         xfree(ffile);
1058         dolzero = 1;
1059         ffile = SAVE(tempv[0]);
1060         /* 
1061          * Replace FSHIN. Handle /dev/std{in,out,err} specially
1062          * since once they are closed we cannot open them again.
1063          * In that case we use our own saved descriptors
1064          */
1065         if ((SHIN = dmove(nofile, FSHIN)) < 0) 
1066             switch(nofile) {
1067             case 0:
1068                 SHIN = FSHIN;
1069                 break;
1070             case 1:
1071                 SHIN = FSHOUT;
1072                 break;
1073             case 2:
1074                 SHIN = FSHDIAG;
1075                 break;
1076             default:
1077                 stderror(ERR_SYSTEM, tempv[0], strerror(errno));
1078                 break;
1079             }
1080         (void) close_on_exec(SHIN, 1);
1081         prompt = 0;
1082          /* argc not used any more */ tempv++;
1083     }
1084
1085     /* 
1086      * Call to closem() used to be part of initdesc(). Now called below where
1087      * the script name argument has become stdin. Kernel may have used a file
1088      * descriptor to hold the name of the script (setuid case) and this name
1089      * mustn't be lost by closing the fd too soon.
1090      */
1091     closem();
1092
1093     /*
1094      * Consider input a tty if it really is or we are interactive. but not for
1095      * editing (christos)
1096      */
1097     if (!(intty = isatty(SHIN))) {
1098         if (adrof(STRedit))
1099             unsetv(STRedit);
1100         editing = 0;
1101     }
1102     intty |= intact;
1103 #ifndef convex
1104     if (intty || (intact && isatty(SHOUT))) {
1105         if (!batch && (uid != euid || gid != egid)) {
1106             errno = EACCES;
1107             child = 1;          /* So this ... */
1108             /* ... doesn't return */
1109             stderror(ERR_SYSTEM, progname, strerror(errno));
1110         }
1111     }
1112 #endif /* convex */
1113     isoutatty = isatty(SHOUT);
1114     isdiagatty = isatty(SHDIAG);
1115     /*
1116      * Decide whether we should play with signals or not. If we are explicitly
1117      * told (via -i, or -) or we are a login shell (arg0 starts with -) or the
1118      * input and output are both the ttys("csh", or "csh</dev/ttyx>/dev/ttyx")
1119      * Note that in only the login shell is it likely that parent may have set
1120      * signals to be ignored
1121      */
1122     if (loginsh || intact || (intty && isatty(SHOUT)))
1123         setintr = 1;
1124     settell();
1125     /*
1126      * Save the remaining arguments in argv.
1127      */
1128     setq(STRargv, blk2short(tempv), &shvhed, VAR_READWRITE);
1129
1130     /*
1131      * Set up the prompt.
1132      */
1133     if (prompt) {
1134         setcopy(STRprompt, STRdefprompt, VAR_READWRITE);
1135         /* that's a meta-questionmark */
1136         setcopy(STRprompt2, STRmquestion, VAR_READWRITE);
1137         setcopy(STRprompt3, STRKCORRECT, VAR_READWRITE);
1138     }
1139
1140     /*
1141      * If we are an interactive shell, then start fiddling with the signals;
1142      * this is a tricky game.
1143      */
1144     shpgrp = mygetpgrp();
1145     opgrp = tpgrp = -1;
1146     if (setintr) {
1147         struct sigaction osig;
1148
1149         **argv = '-';
1150         if (!quitit)            /* Wary! */
1151             (void) signal(SIGQUIT, SIG_IGN);
1152         pintr_disabled = 1;
1153         sigset_interrupting(SIGINT, queue_pintr);
1154         (void) signal(SIGTERM, SIG_IGN);
1155
1156         /* 
1157          * No reason I can see not to save history on all these events..
1158          * Most usual occurrence is in a window system, where we're not a login
1159          * shell, but might as well be... (sg)
1160          * But there might be races when lots of shells exit together...
1161          * [this is also incompatible].
1162          * We have to be mre careful here. If the parent wants to 
1163          * ignore the signals then we leave them untouched...
1164          * We also only setup the handlers for shells that are trully
1165          * interactive.
1166          */
1167         sigaction(SIGHUP, NULL, &osig);
1168         if (loginsh || osig.sa_handler != SIG_IGN)
1169             /* exit processing on HUP */
1170             sigset_interrupting(SIGHUP, queue_phup);
1171 #ifdef SIGXCPU
1172         sigaction(SIGXCPU, NULL, &osig);
1173         if (loginsh || osig.sa_handler != SIG_IGN)
1174             /* exit processing on XCPU */
1175             sigset_interrupting(SIGXCPU, queue_phup);
1176 #endif
1177 #ifdef SIGXFSZ
1178         sigaction(SIGXFSZ, NULL, &osig);
1179         if (loginsh || osig.sa_handler != SIG_IGN)
1180             /* exit processing on XFSZ */
1181             sigset_interrupting(SIGXFSZ, queue_phup);
1182 #endif
1183
1184         if (quitit == 0 && targinp == 0) {
1185 #ifdef SIGTSTP
1186             (void) signal(SIGTSTP, SIG_IGN);
1187 #endif
1188 #ifdef SIGTTIN
1189             (void) signal(SIGTTIN, SIG_IGN);
1190 #endif
1191 #ifdef SIGTTOU
1192             (void) signal(SIGTTOU, SIG_IGN);
1193 #endif
1194             /*
1195              * Wait till in foreground, in case someone stupidly runs csh &
1196              * dont want to try to grab away the tty.
1197              */
1198             if (isatty(FSHDIAG))
1199                 f = FSHDIAG;
1200             else if (isatty(FSHOUT))
1201                 f = FSHOUT;
1202             else if (isatty(OLDSTD))
1203                 f = OLDSTD;
1204             else
1205                 f = -1;
1206
1207 #ifdef NeXT
1208             /* NeXT 2.0 /usr/etc/rlogind, does not set our process group! */
1209             if (f != -1 && shpgrp == 0) {
1210                 shpgrp = getpid();
1211                 (void) setpgid(0, shpgrp);
1212                 (void) tcsetpgrp(f, shpgrp);
1213             }
1214 #endif /* NeXT */
1215 #ifdef BSDJOBS                  /* if we have tty job control */
1216             if (f != -1 && grabpgrp(f, shpgrp) != -1) {
1217                 /*
1218                  * Thanks to Matt Day for the POSIX references, and to
1219                  * Paul Close for the SGI clarification.
1220                  */
1221                 if (setdisc(f) != -1) {
1222                     opgrp = shpgrp;
1223                     shpgrp = getpid();
1224                     tpgrp = shpgrp;
1225                     if (tcsetpgrp(f, shpgrp) == -1) {
1226                         /*
1227                          * On hpux 7.03 this fails with EPERM. This happens on
1228                          * the 800 when opgrp != shpgrp at this point. (we were
1229                          * forked from a non job control shell)
1230                          * POSIX 7.2.4, says we failed because the process
1231                          * group specified did not belong to a process
1232                          * in the same session with the tty. So we set our
1233                          * process group and try again.
1234                          */
1235                         if (setpgid(0, shpgrp) == -1) {
1236                             xprintf("setpgid:");
1237                             goto notty;
1238                         }
1239                         if (tcsetpgrp(f, shpgrp) == -1) {
1240                             xprintf("tcsetpgrp:");
1241                             goto notty;
1242                         }
1243                     }
1244                     /*
1245                      * We check the process group now. If it is the same, then
1246                      * we don't need to set it again. On hpux 7.0 on the 300's
1247                      * if we set it again it fails with EPERM. This is the
1248                      * correct behavior according to POSIX 4.3.3 if the process
1249                      * was a session leader .
1250                      */
1251                     else if (shpgrp != mygetpgrp()) {
1252                         if(setpgid(0, shpgrp) == -1) {
1253                             xprintf("setpgid:");
1254                             goto notty;
1255                         }
1256                     }
1257 #ifdef IRIS4D
1258                     /*
1259                      * But on irix 3.3 we need to set it again, even if it is
1260                      * the same. We do that to tell the system that we
1261                      * need BSD process group compatibility.
1262                      */
1263                     else
1264                         (void) setpgid(0, shpgrp);
1265 #endif
1266                     (void) close_on_exec(dcopy(f, FSHTTY), 1);
1267                 }
1268                 else
1269                     tpgrp = -1;
1270             }
1271             if (tpgrp == -1) {
1272         notty:
1273                 xprintf(CGETS(11, 1, "Warning: no access to tty (%s).\n"),
1274                     strerror(errno));
1275                 xprintf("%s",
1276                     CGETS(11, 2, "Thus no job control in this shell.\n"));
1277                 /*
1278                  * Fix from:Sakari Jalovaara <sja@sirius.hut.fi> if we don't
1279                  * have access to tty, disable editing too
1280                  */
1281                 if (adrof(STRedit))
1282                     unsetv(STRedit);
1283                 editing = 0;
1284             }
1285 #else   /* BSDJOBS */           /* don't have job control, so frotz it */
1286             tpgrp = -1;
1287 #endif                          /* BSDJOBS */
1288         }
1289     }
1290     if (setintr == 0 && parintr.sa_handler == SIG_DFL)
1291         setintr = 1;
1292
1293 /*
1294  * SVR4 doesn't send a SIGCHLD when a child is stopped or continued if the
1295  * handler is installed with signal(2) or sigset(2).  sigaction(2) must
1296  * be used instead.
1297  *
1298  * David Dawes (dawes@physics.su.oz.au) Sept 1991
1299  */
1300     sigset_interrupting(SIGCHLD, queue_pchild);
1301
1302     if (intty && !targinp)      
1303         (void) ed_Setup(editing);/* Get the tty state, and set defaults */
1304                                  /* Only alter the tty state if editing */
1305     
1306     /*
1307      * Set an exit here in case of an interrupt or error reading the shell
1308      * start-up scripts.
1309      */
1310     osetintr = setintr;
1311     oparintr = parintr;
1312     (void)cleanup_push_mark(); /* There is no outer handler */
1313     if (setexit() != 0) /* PWP */
1314         reenter = 1;
1315     else
1316         reenter = 0;
1317     exitset++;
1318     haderr = 0;                 /* In case second time through */
1319     if (!fast && reenter == 0) {
1320         /* Will have varval(STRhome) here because set fast if don't */
1321         {
1322             pintr_disabled++;
1323             cleanup_push(&pintr_disabled, disabled_cleanup);
1324             setintr = 0;/*FIXRESET:cleanup*/
1325             /* onintr in /etc/ files has no effect */
1326             parintr.sa_handler = SIG_IGN;/*FIXRESET: cleanup*/
1327 #ifdef LOGINFIRST
1328 #ifdef _PATH_DOTLOGIN
1329             if (loginsh)
1330                 (void) srcfile(_PATH_DOTLOGIN, 0, 0, NULL);
1331 #endif
1332 #endif
1333
1334 #ifdef _PATH_DOTCSHRC
1335             (void) srcfile(_PATH_DOTCSHRC, 0, 0, NULL);
1336 #endif
1337             if (!targinp && !onelflg && !havhash)
1338                 dohash(NULL,NULL);
1339 #ifndef LOGINFIRST
1340 #ifdef _PATH_DOTLOGIN
1341             if (loginsh)
1342                 (void) srcfile(_PATH_DOTLOGIN, 0, 0, NULL);
1343 #endif
1344 #endif
1345             cleanup_until(&pintr_disabled);
1346             setintr = osetintr;
1347             parintr = oparintr;
1348         }
1349 #ifdef LOGINFIRST
1350         if (loginsh)
1351             (void) srccat(varval(STRhome), STRsldotlogin);
1352 #endif
1353         /* upward compat. */
1354         if (!srccat(varval(STRhome), STRsldottcshrc))
1355             (void) srccat(varval(STRhome), STRsldotcshrc);
1356
1357         if (!targinp && !onelflg && !havhash)
1358             dohash(NULL,NULL);
1359
1360         /*
1361          * Source history before .login so that it is available in .login
1362          */
1363         loadhist(NULL, 0);
1364 #ifndef LOGINFIRST
1365         if (loginsh)
1366             (void) srccat(varval(STRhome), STRsldotlogin);
1367 #endif
1368         if (loginsh || rdirs)
1369             loaddirs(NULL);
1370     }
1371     /* Reset interrupt flag */
1372     setintr = osetintr;
1373     parintr = oparintr;
1374     exitset--;
1375
1376     /* Initing AFTER .cshrc is the Right Way */
1377     if (intty && !targinp) {    /* PWP setup stuff */
1378         ed_Init();              /* init the new line editor */
1379 #ifdef SIG_WINDOW
1380         check_window_size(1);   /* mung environment */
1381 #endif                          /* SIG_WINDOW */
1382     }
1383
1384     /*
1385      * Now are ready for the -v and -x flags
1386      */
1387     if (nverbose)
1388         setNS(STRverbose);
1389     if (nexececho)
1390         setNS(STRecho);
1391     
1392
1393     if (targinp) {
1394         /* If this -c command caused an error before, skip processing */
1395         if (reenter && arginp) {
1396             exitcode = 1;
1397             goto done;
1398         }
1399
1400         arginp = SAVE(targinp);
1401         /*
1402          * we put the command into a variable
1403          */
1404         if (arginp != NULL)
1405             setv(STRcommand, quote(Strsave(arginp)), VAR_READWRITE);
1406
1407         /*
1408          * * Give an error on -c arguments that end in * backslash to
1409          * ensure that you don't make * nonportable csh scripts.
1410          */
1411         {
1412             int count;
1413
1414             cp = Strend(arginp);
1415             count = 0;
1416             while (cp > arginp && *--cp == '\\')
1417                 ++count;
1418             if ((count & 1) != 0) {
1419                 exiterr = 1;
1420                 stderror(ERR_ARGC);
1421             }
1422         }
1423     }
1424     /*
1425      * All the rest of the world is inside this call. The argument to process
1426      * indicates whether it should catch "error unwinds".  Thus if we are a
1427      * interactive shell our call here will never return by being blown past on
1428      * an error.
1429      */
1430     process(setintr);
1431
1432 done:
1433     /*
1434      * Mop-up.
1435      */
1436     /* Take care of these (especially HUP) here instead of inside flush. */
1437     handle_pending_signals();
1438     if (intty) {
1439         if (loginsh) {
1440             xprintf("logout\n");
1441             xclose(SHIN);
1442             child = 1;
1443 #ifdef TESLA
1444             do_logout = 1;
1445 #endif                          /* TESLA */
1446             goodbye(NULL, NULL);
1447         }
1448         else {
1449             xprintf("exit\n");
1450         }
1451     }
1452     record();
1453     exitstat();
1454     return exitcode;
1455 }
1456
1457 void
1458 untty(void)
1459 {
1460 #ifdef BSDJOBS
1461     if (tpgrp > 0 && opgrp != shpgrp) {
1462         (void) setpgid(0, opgrp);
1463         (void) tcsetpgrp(FSHTTY, opgrp);
1464         (void) resetdisc(FSHTTY);
1465     }
1466 #endif /* BSDJOBS */
1467 }
1468
1469 void
1470 importpath(Char *cp)
1471 {
1472     size_t i = 0;
1473     Char *dp;
1474     Char **pv;
1475     int     c;
1476
1477     for (dp = cp; *dp; dp++)
1478         if (*dp == PATHSEP)
1479             i++;
1480     /*
1481      * i+2 where i is the number of colons in the path. There are i+1
1482      * directories in the path plus we need room for a zero terminator.
1483      */
1484     pv = xcalloc(i + 2, sizeof(Char *));
1485     dp = cp;
1486     i = 0;
1487     if (*dp)
1488         for (;;) {
1489             if ((c = *dp) == PATHSEP || c == 0) {
1490                 *dp = 0;
1491                 pv[i++] = Strsave(*cp ? cp : STRdot);
1492                 if (c) {
1493                     cp = dp + 1;
1494                     *dp = PATHSEP;
1495                 }
1496                 else
1497                     break;
1498             }
1499 #ifdef WINNT_NATIVE
1500             else if (*dp == '\\')
1501                 *dp = '/';
1502 #endif /* WINNT_NATIVE */
1503             dp++;
1504         }
1505     pv[i] = 0;
1506     cleanup_push(pv, blk_cleanup);
1507     setq(STRpath, pv, &shvhed, VAR_READWRITE);
1508     cleanup_ignore(pv);
1509     cleanup_until(pv);
1510 }
1511
1512 /*
1513  * Source to the file which is the catenation of the argument names.
1514  */
1515 static int
1516 srccat(Char *cp, Char *dp)
1517 {
1518     if (cp[0] == '/' && cp[1] == '\0') 
1519         return srcfile(short2str(dp), (mflag ? 0 : 1), 0, NULL);
1520     else {
1521         Char *ep;
1522         char   *ptr;
1523         int rv;
1524
1525 #ifdef WINNT_NATIVE
1526         ep = Strend(cp);
1527         if (ep != cp && ep[-1] == '/' && dp[0] == '/') /* silly win95 */
1528             dp++;
1529 #endif /* WINNT_NATIVE */
1530
1531         ep = Strspl(cp, dp);
1532         cleanup_push(ep, xfree);
1533         ptr = short2str(ep);
1534
1535         rv = srcfile(ptr, (mflag ? 0 : 1), 0, NULL);
1536         cleanup_until(ep);
1537         return rv;
1538     }
1539 }
1540
1541 /*
1542  * Source to a file putting the file descriptor in a safe place (> 2).
1543  */
1544 #ifndef WINNT_NATIVE
1545 static int
1546 #else
1547 int
1548 #endif /*WINNT_NATIVE*/
1549 srcfile(const char *f, int onlyown, int flag, Char **av)
1550 {
1551     int unit;
1552
1553     if ((unit = xopen(f, O_RDONLY|O_LARGEFILE)) == -1) 
1554         return 0;
1555     cleanup_push(&unit, open_cleanup);
1556     unit = dmove(unit, -1);
1557     cleanup_ignore(&unit);
1558     cleanup_until(&unit);
1559
1560     (void) close_on_exec(unit, 1);
1561     srcunit(unit, onlyown, flag, av);
1562     return 1;
1563 }
1564
1565
1566 /*
1567  * Save the shell state, and establish new argument vector, and new input
1568  * fd.
1569  */
1570 static void
1571 st_save(struct saved_state *st, int unit, int hflg, Char **al, Char **av)
1572 {
1573     st->insource        = insource;
1574     st->SHIN            = SHIN;
1575     /* Want to preserve the meaning of "source file >output".
1576      * Save old descriptors, move new 0,1,2 to safe places and assign
1577      * them to SH* and let process() redo 0,1,2 from them.
1578      *
1579      * The macro returns true if d1 and d2 are good and they point to
1580      * different things.  If you don't avoid saving duplicate
1581      * descriptors, you really limit the depth of "source" recursion
1582      * you can do because of all the open file descriptors.  -IAN!
1583      */
1584 #define NEED_SAVE_FD(d1,d2) \
1585     (fstat(d1, &s1) != -1 && fstat(d2, &s2) != -1 \
1586         && (s1.st_ino != s2.st_ino || s1.st_dev != s2.st_dev) )
1587
1588     st->OLDSTD = st->SHOUT = st->SHDIAG = -1;/* test later to restore these */
1589     if (didfds) {
1590             struct stat s1, s2;
1591             if (NEED_SAVE_FD(0,OLDSTD)) {
1592                     st->OLDSTD = OLDSTD;
1593                     OLDSTD = dmove(0, -1);
1594                     (void)close_on_exec(OLDSTD, 1);
1595             }
1596             if (NEED_SAVE_FD(1,SHOUT)) {
1597                     st->SHOUT = SHOUT;
1598                     SHOUT = dmove(1, -1);
1599                     (void)close_on_exec(SHOUT, 1);
1600             }
1601             if (NEED_SAVE_FD(2,SHDIAG)) {
1602                     st->SHDIAG = SHDIAG;
1603                     SHDIAG = dmove(2, -1);
1604                     (void)close_on_exec(SHDIAG, 1);
1605             }
1606             donefds();
1607     }
1608
1609     st->intty           = intty;
1610     st->whyles          = whyles;
1611     st->gointr          = gointr;
1612     st->arginp          = arginp;
1613     st->evalp           = evalp;
1614     st->evalvec         = evalvec;
1615     st->alvecp          = alvecp;
1616     st->alvec           = alvec;
1617     st->onelflg         = onelflg;
1618     st->enterhist       = enterhist;
1619     st->justpr          = justpr;
1620     if (hflg)
1621         st->HIST        = HIST;
1622     else
1623         st->HIST        = '\0';
1624     st->cantell         = cantell;
1625     cpybin(st->B, B);
1626
1627     /*
1628      * we can now pass arguments to source. 
1629      * For compatibility we do that only if arguments were really
1630      * passed, otherwise we keep the old, global $argv like before.
1631      */
1632     if (av != NULL && *av != NULL) {
1633         struct varent *vp;
1634         if ((vp = adrof(STRargv)) != NULL && vp->vec != NULL)
1635             st->argv = saveblk(vp->vec);
1636         else
1637             st->argv = NULL;
1638         setq(STRargv, saveblk(av), &shvhed, VAR_READWRITE);
1639     }
1640     else
1641         st->argv = NULL;
1642     st->av = av;
1643
1644     SHIN        = unit; /* Do this first */
1645
1646     /* Establish new input arena */
1647     {
1648         fbuf = NULL;
1649         fseekp = feobp = fblocks = 0;
1650         settell();
1651     }
1652
1653     arginp      = 0;
1654     onelflg     = 0;
1655     intty       = isatty(SHIN);
1656     whyles      = 0;
1657     gointr      = 0;
1658     evalvec     = 0;
1659     evalp       = 0;
1660     alvec       = al;
1661     alvecp      = 0;
1662     enterhist   = hflg;
1663     if (enterhist)
1664         HIST    = '\0';
1665     insource    = 1;
1666 }
1667
1668
1669 /*
1670  * Restore the shell to a saved state
1671  */
1672 static void
1673 st_restore(void *xst)
1674 {
1675     struct saved_state *st;
1676
1677     st = xst;
1678     if (st->SHIN == -1)
1679         return;
1680
1681     /* Reset input arena */
1682     {
1683         int i;
1684         Char** nfbuf = fbuf;
1685         int nfblocks = fblocks;
1686
1687         fblocks = 0;
1688         fbuf = NULL;
1689         for (i = 0; i < nfblocks; i++)
1690             xfree(nfbuf[i]);
1691         xfree(nfbuf);
1692     }
1693     cpybin(B, st->B);
1694
1695     xclose(SHIN);
1696
1697     insource    = st->insource;
1698     SHIN        = st->SHIN;
1699     if (st->OLDSTD != -1)
1700         xclose(OLDSTD), OLDSTD = st->OLDSTD;
1701     if (st->SHOUT != -1)
1702         xclose(SHOUT),  SHOUT = st->SHOUT;
1703     if (st->SHDIAG != -1)
1704         xclose(SHDIAG), SHDIAG = st->SHDIAG;
1705     arginp      = st->arginp;
1706     onelflg     = st->onelflg;
1707     evalp       = st->evalp;
1708     evalvec     = st->evalvec;
1709     alvecp      = st->alvecp;
1710     alvec       = st->alvec;
1711     intty       = st->intty;
1712     whyles      = st->whyles;
1713     gointr      = st->gointr;
1714     if (st->HIST != '\0')
1715         HIST    = st->HIST;
1716     enterhist   = st->enterhist;
1717     cantell     = st->cantell;
1718     justpr      = st->justpr;
1719
1720     if (st->argv != NULL)
1721         setq(STRargv, st->argv, &shvhed, VAR_READWRITE);
1722     else if (st->av != NULL  && *st->av != NULL && adrof(STRargv) != NULL)
1723         unsetv(STRargv);
1724 }
1725
1726 /*
1727  * Source to a unit.  If onlyown it must be our file or our group or
1728  * we don't chance it.  This occurs on ".cshrc"s and the like.
1729  */
1730 static void
1731 srcunit(int unit, int onlyown, int hflg, Char **av)
1732 {
1733     struct saved_state st;
1734
1735     st.SHIN = -1;       /* st_restore checks this */
1736
1737     if (unit < 0)
1738         return;
1739
1740     if (onlyown) {
1741         struct stat stb;
1742
1743         if (fstat(unit, &stb) < 0) {
1744             xclose(unit);
1745             return;
1746         }
1747     }
1748
1749     /* Does nothing before st_save() because st.SHIN == -1 */
1750     cleanup_push(&st, st_restore);
1751     if (setintr) {
1752         pintr_disabled++;
1753         cleanup_push(&pintr_disabled, disabled_cleanup);
1754     }
1755
1756     /* Save the current state and move us to a new state */
1757     st_save(&st, unit, hflg, NULL, av);
1758
1759     /*
1760      * Now if we are allowing commands to be interrupted, we let ourselves be
1761      * interrupted.
1762      */
1763     if (setintr) {
1764         cleanup_until(&pintr_disabled);
1765         pintr_disabled++;
1766         cleanup_push(&pintr_disabled, disabled_cleanup);
1767     }
1768
1769     process(0);         /* 0 -> blow away on errors */
1770
1771     /* Restore the old state */
1772     cleanup_until(&st);
1773 }
1774
1775
1776 /*ARGSUSED*/
1777 void
1778 goodbye(Char **v, struct command *c)
1779 {
1780     USE(v);
1781     USE(c);
1782     record();
1783
1784     if (loginsh) {
1785         size_t omark;
1786         sigset_t set;
1787
1788         sigemptyset(&set);
1789         signal(SIGQUIT, SIG_IGN);
1790         sigaddset(&set, SIGQUIT);
1791         sigprocmask(SIG_UNBLOCK, &set, NULL);
1792         signal(SIGINT, SIG_IGN);
1793         sigaddset(&set, SIGINT);
1794         signal(SIGTERM, SIG_IGN);
1795         sigaddset(&set, SIGTERM);
1796         signal(SIGHUP, SIG_IGN);
1797         sigaddset(&set, SIGHUP);
1798         sigprocmask(SIG_UNBLOCK, &set, NULL);
1799         phup_disabled = 1;
1800         setintr = 0;            /* No interrupts after "logout" */
1801         /* Trap errors inside .logout */
1802         omark = cleanup_push_mark();
1803         if (setexit() == 0) {
1804             if (!(adrof(STRlogout)))
1805                 setcopy(STRlogout, STRnormal, VAR_READWRITE);
1806 #ifdef _PATH_DOTLOGOUT
1807             (void) srcfile(_PATH_DOTLOGOUT, 0, 0, NULL);
1808 #endif
1809             if (adrof(STRhome))
1810                 (void) srccat(varval(STRhome), STRsldtlogout);
1811 #ifdef TESLA
1812             do_logout = 1;
1813 #endif /* TESLA */
1814         }
1815         cleanup_pop_mark(omark);
1816     }
1817     exitstat();
1818 }
1819
1820 void
1821 exitstat(void)
1822 {
1823 #ifdef PROF
1824     _mcleanup();
1825 #endif
1826     /*
1827      * Note that if STATUS is corrupted (i.e. getn bombs) then error will exit
1828      * directly because we poke child here. Otherwise we might continue
1829      * unwarrantedly (sic).
1830      */
1831     child = 1;
1832
1833     xexit(getn(varval(STRstatus)));
1834 }
1835
1836 /*
1837  * in the event of a HUP we want to save the history
1838  */
1839 void
1840 phup(void)
1841 {
1842     if (loginsh) {
1843         setcopy(STRlogout, STRhangup, VAR_READWRITE);
1844 #ifdef _PATH_DOTLOGOUT
1845         (void) srcfile(_PATH_DOTLOGOUT, 0, 0, NULL);
1846 #endif
1847         if (adrof(STRhome))
1848             (void) srccat(varval(STRhome), STRsldtlogout);
1849     }
1850
1851     record();
1852
1853 #ifdef POSIXJOBS 
1854     /*
1855      * We kill the last foreground process group. It then becomes
1856      * responsible to propagate the SIGHUP to its progeny. 
1857      */
1858     {
1859         struct process *pp, *np;
1860
1861         for (pp = proclist.p_next; pp; pp = pp->p_next) {
1862             np = pp;
1863             /* 
1864              * Find if this job is in the foreground. It could be that
1865              * the process leader has exited and the foreground flag
1866              * is cleared for it.
1867              */
1868             do 
1869                 /*
1870                  * If a process is in the foreground we try to kill
1871                  * it's process group. If we succeed, then the 
1872                  * whole job is gone. Otherwise we keep going...
1873                  * But avoid sending HUP to the shell again.
1874                  */
1875                 if (((np->p_flags & PFOREGND) != 0) && np->p_jobid != shpgrp) {
1876                     np->p_flags &= ~PHUP;
1877                     if (killpg(np->p_jobid, SIGHUP) != -1) {
1878                         /* In case the job was suspended... */
1879 #ifdef SIGCONT
1880                         (void) killpg(np->p_jobid, SIGCONT);
1881 #endif
1882                         break;
1883                     }
1884                 }
1885             while ((np = np->p_friends) != pp);
1886         }
1887     }
1888 #endif /* POSIXJOBS */
1889
1890     xexit(SIGHUP);
1891 }
1892
1893 static Char   *jobargv[2] = {STRjobs, 0};
1894
1895 /*
1896  * Catch an interrupt, e.g. during lexical input.
1897  * If we are an interactive shell, we reset the interrupt catch
1898  * immediately.  In any case we drain the shell output,
1899  * and finally go through the normal error mechanism, which
1900  * gets a chance to make the shell go away.
1901  */
1902 int just_signaled;              /* bugfix by Michael Bloom (mg@ttidca.TTI.COM) */
1903
1904 void
1905 pintr(void)
1906 {
1907     just_signaled = 1;
1908     pintr1(1);
1909 }
1910
1911 void
1912 pintr1(int wantnl)
1913 {
1914     if (setintr) {
1915         if (pjobs) {
1916             pjobs = 0;
1917             xputchar('\n');
1918             dojobs(jobargv, NULL);
1919             stderror(ERR_NAME | ERR_INTR);
1920         }
1921     }
1922     /* MH - handle interrupted completions specially */
1923     {
1924         if (InsideCompletion)
1925             stderror(ERR_SILENT);
1926     }
1927     /* JV - Make sure we shut off inputl */
1928     {
1929         (void) Cookedmode();
1930         GettingInput = 0;
1931         if (evalvec)
1932             doneinp = 1;
1933     }
1934     drainoline();
1935 #ifdef HAVE_GETPWENT
1936     (void) endpwent();
1937 #endif
1938
1939     /*
1940      * If we have an active "onintr" then we search for the label. Note that if
1941      * one does "onintr -" then we shan't be interruptible so we needn't worry
1942      * about that here.
1943      */
1944     if (gointr) {
1945         gotolab(gointr);
1946         reset();
1947     }
1948     else if (intty && wantnl) {
1949         if (editing) {
1950             /* 
1951              * If we are editing a multi-line input command, and move to
1952              * the beginning of the line, we don't want to trash it when
1953              * we hit ^C
1954              */
1955             PastBottom();
1956             ClearLines();
1957             ClearDisp();
1958         }
1959         else {
1960             /* xputchar('\n'); *//* Some like this, others don't */
1961             (void) putraw('\r');
1962             (void) putraw('\n');
1963         }
1964     }
1965     stderror(ERR_SILENT);
1966 }
1967
1968 /*
1969  * Process is the main driving routine for the shell.
1970  * It runs all command processing, except for those within { ... }
1971  * in expressions (which is run by a routine evalav in sh.exp.c which
1972  * is a stripped down process), and `...` evaluation which is run
1973  * also by a subset of this code in sh.glob.c in the routine backeval.
1974  *
1975  * The code here is a little strange because part of it is interruptible
1976  * and hence freeing of structures appears to occur when none is necessary
1977  * if this is ignored.
1978  *
1979  * Note that if catch is not set then we will unwind on any error.
1980  * If an end-of-file occurs, we return.
1981  */
1982 void
1983 process(int catch)
1984 {
1985     jmp_buf_t osetexit;
1986     /* PWP: This might get nuked by longjmp so don't make it a register var */
1987     size_t omark;
1988     volatile int didexitset = 0;
1989
1990     getexit(osetexit);
1991     omark = cleanup_push_mark();
1992     for (;;) {
1993         struct command *t;
1994         int hadhist, old_pintr_disabled;
1995
1996         (void)setexit();
1997         if (didexitset == 0) {
1998             exitset++;
1999             didexitset++;
2000         }
2001         pendjob();
2002
2003         justpr = enterhist;     /* execute if not entering history */
2004
2005         if (haderr) {
2006             if (!catch) {
2007                 /* unwind */
2008                 doneinp = 0;
2009                 cleanup_pop_mark(omark);
2010                 resexit(osetexit);
2011                 reset();
2012             }
2013             haderr = 0;
2014             /*
2015              * Every error is eventually caught here or the shell dies.  It is
2016              * at this point that we clean up any left-over open files, by
2017              * closing all but a fixed number of pre-defined files.  Thus
2018              * routines don't have to worry about leaving files open due to
2019              * deeper errors... they will get closed here.
2020              */
2021             closem();
2022             continue;
2023         }
2024         if (doneinp) {
2025             doneinp = 0;
2026             break;
2027         }
2028         if (chkstop)
2029             chkstop--;
2030         if (neednote)
2031             pnote();
2032         if (intty && prompt && evalvec == 0) {
2033             just_signaled = 0;
2034             mailchk();
2035             /*
2036              * Watch for logins/logouts. Next is scheduled commands stored
2037              * previously using "sched." Then execute periodic commands.
2038              * Following that, the prompt precmd is run.
2039              */
2040 #ifndef HAVENOUTMP
2041             watch_login(0);
2042 #endif /* !HAVENOUTMP */
2043             sched_run();
2044             period_cmd();
2045             precmd();
2046             /*
2047              * If we are at the end of the input buffer then we are going to
2048              * read fresh stuff. Otherwise, we are rereading input and don't
2049              * need or want to prompt.
2050              */
2051             if (fseekp == feobp && aret == TCSH_F_SEEK)
2052                 printprompt(0, NULL);
2053             flush();
2054             setalarm(1);
2055         }
2056         if (seterr) {
2057             xfree(seterr);
2058             seterr = NULL;
2059         }
2060
2061         /*
2062          * Interruptible during interactive reads
2063          */
2064         if (setintr)
2065             pintr_push_enable(&old_pintr_disabled);
2066         freelex(&paraml);
2067         hadhist = lex(&paraml);
2068         if (setintr)
2069             cleanup_until(&old_pintr_disabled);
2070         cleanup_push(&paraml, lex_cleanup);
2071
2072         /*
2073          * Echo not only on VERBOSE, but also with history expansion. If there
2074          * is a lexical error then we forego history echo.
2075          * Do not echo if we're only entering history (source -h).
2076          */
2077         if ((hadhist && !seterr && intty && !tellwhat && !Expand && !whyles) ||
2078             (!enterhist && adrof(STRverbose)))
2079         {
2080             int odidfds = didfds;
2081             haderr = 1;
2082             didfds = 0;
2083             prlex(&paraml);
2084             flush();
2085             haderr = 0;
2086             didfds = odidfds;
2087         }
2088         (void) alarm(0);        /* Autologout OFF */
2089         alrmcatch_disabled = 1;
2090
2091         /*
2092          * Save input text on the history list if reading in old history, or it
2093          * is from the terminal at the top level and not in a loop.
2094          * 
2095          * PWP: entry of items in the history list while in a while loop is done
2096          * elsewhere...
2097          */
2098         if (enterhist || (catch && intty && !whyles && !tellwhat && !arun))
2099             savehist(&paraml, enterhist > 1);
2100
2101         if (Expand && seterr)
2102             Expand = 0;
2103
2104         /*
2105          * Print lexical error messages, except when sourcing history lists.
2106          */
2107         if (!enterhist && seterr)
2108             stderror(ERR_OLD);
2109
2110         /*
2111          * If had a history command :p modifier then this is as far as we
2112          * should go
2113          */
2114         if (justpr)
2115             goto cmd_done;
2116
2117         /*
2118          * If had a tellwhat from twenex() then do
2119          */
2120         if (tellwhat) {
2121             (void) tellmewhat(&paraml, NULL);
2122             goto cmd_done;
2123         }
2124
2125         alias(&paraml);
2126
2127 #ifdef BSDJOBS
2128         /*
2129          * If we are interactive, try to continue jobs that we have stopped
2130          */
2131         if (prompt)
2132             continue_jobs(&paraml);
2133 #endif                          /* BSDJOBS */
2134
2135         /*
2136          * Check to see if the user typed "rm * .o" or something
2137          */
2138         if (prompt)
2139             rmstar(&paraml);
2140         /*
2141          * Parse the words of the input into a parse tree.
2142          */
2143         t = syntax(paraml.next, &paraml, 0);
2144         /*
2145          * We cannot cleanup push here, because cd /blah; echo foo
2146          * would rewind t on the chdir error, and free the rest of the command
2147          */
2148         if (seterr) {
2149             freesyn(t);
2150             stderror(ERR_OLD);
2151         }
2152
2153         postcmd();
2154         /*
2155          * Execute the parse tree From: Michael Schroeder
2156          * <mlschroe@immd4.informatik.uni-erlangen.de> was execute(t, tpgrp);
2157          */
2158         execute(t, (tpgrp > 0 ? tpgrp : -1), NULL, NULL, TRUE);
2159         freesyn(t);
2160
2161         /*
2162          * Made it!
2163          */
2164 #ifdef SIG_WINDOW
2165         if (windowchg || (catch && intty && !whyles && !tellwhat)) {
2166             (void) check_window_size(0);        /* for window systems */
2167         }
2168 #endif /* SIG_WINDOW */
2169         setcopy(STR_, InputBuf, VAR_READWRITE | VAR_NOGLOB);
2170     cmd_done:
2171         if (cleanup_reset())
2172             cleanup_until(&paraml);
2173         else
2174             haderr = 1;
2175     }
2176     cleanup_pop_mark(omark);
2177     resexit(osetexit);
2178     exitset--;
2179     handle_pending_signals();
2180 }
2181
2182 /*ARGSUSED*/
2183 void
2184 dosource(Char **t, struct command *c)
2185 {
2186     Char *f;
2187     int    hflg = 0;
2188     char *file;
2189
2190     USE(c);
2191     t++;
2192     if (*t && eq(*t, STRmh)) {
2193         if (*++t == NULL)
2194             stderror(ERR_NAME | ERR_HFLAG);
2195         hflg++;
2196     }
2197     else if (*t && eq(*t, STRmm)) {
2198         if (*++t == NULL)
2199             stderror(ERR_NAME | ERR_MFLAG);
2200         hflg = 2;
2201     }
2202
2203     f = globone(*t++, G_ERROR);
2204     file = strsave(short2str(f));
2205     cleanup_push(file, xfree);
2206     xfree(f);
2207     t = glob_all_or_error(t);
2208     cleanup_push(t, blk_cleanup);
2209     if ((!srcfile(file, 0, hflg, t)) && (!hflg) && (!bequiet))
2210         stderror(ERR_SYSTEM, file, strerror(errno));
2211     cleanup_until(file);
2212 }
2213
2214 /*
2215  * Check for mail.
2216  * If we are a login shell, then we don't want to tell
2217  * about any mail file unless its been modified
2218  * after the time we started.
2219  * This prevents us from telling the user things he already
2220  * knows, since the login program insists on saying
2221  * "You have mail."
2222  */
2223
2224 /*
2225  * The AMS version.
2226  * This version checks if the file is a directory, and if so,
2227  * tells you the number of files in it, otherwise do the old thang.
2228  * The magic "+1" in the time calculation is to compensate for
2229  * an AFS bug where directory mtimes are set to 1 second in
2230  * the future.
2231  */
2232
2233 static void
2234 mailchk(void)
2235 {
2236     struct varent *v;
2237     Char **vp;
2238     time_t  t;
2239     int     intvl, cnt;
2240     struct stat stb;
2241     int    new;
2242
2243     v = adrof(STRmail);
2244     if (v == NULL || v->vec == NULL)
2245         return;
2246     (void) time(&t);
2247     vp = v->vec;
2248     cnt = blklen(vp);
2249     intvl = (cnt && number(*vp)) ? (--cnt, getn(*vp++)) : MAILINTVL;
2250     if (intvl < 1)
2251         intvl = 1;
2252     if (chktim + intvl > t)
2253         return;
2254     for (; *vp; vp++) {
2255         char *filename = short2str(*vp);
2256         char *mboxdir = filename;
2257
2258         if (stat(filename, &stb) < 0)
2259             continue;
2260 #if defined(BSDTIMES) || defined(_SEQUENT_)
2261         new = stb.st_mtime > time0.tv_sec;
2262 #else
2263         new = stb.st_mtime > seconds0;
2264 #endif
2265         if (S_ISDIR(stb.st_mode)) {
2266             DIR *mailbox;
2267             int mailcount = 0;
2268             char *tempfilename;
2269             struct stat stc;
2270
2271             tempfilename = xasprintf("%s/new", filename);
2272
2273             if (stat(tempfilename, &stc) != -1 && S_ISDIR(stc.st_mode)) {
2274                 /*
2275                  * "filename/new" exists and is a directory; you are
2276                  * using Qmail.
2277                  */
2278                 stb = stc;
2279 #if defined(BSDTIMES) || defined(_SEQUENT_)
2280                 new = stb.st_mtime > time0.tv_sec;
2281 #else
2282                 new = stb.st_mtime > seconds0;
2283 #endif
2284                 mboxdir = tempfilename;
2285             }
2286
2287             if (stb.st_mtime <= chktim + 1 || (loginsh && !new)) {
2288                 xfree(tempfilename);
2289                 continue;
2290             }
2291
2292             mailbox = opendir(mboxdir);
2293             xfree(tempfilename);
2294             if (mailbox == NULL)
2295                 continue;
2296
2297             /* skip . and .. */
2298             if (!readdir(mailbox) || !readdir(mailbox)) {
2299                 (void)closedir(mailbox);
2300                 continue;
2301             }
2302
2303             while (readdir(mailbox))
2304                 mailcount++;
2305
2306             (void)closedir(mailbox);
2307             if (mailcount == 0)
2308                 continue;
2309
2310             if (cnt == 1)
2311                 xprintf(CGETS(11, 3, "You have %d mail messages.\n"),
2312                         mailcount);
2313             else
2314                 xprintf(CGETS(11, 4, "You have %d mail messages in %s.\n"),
2315                         mailcount, filename);
2316         }
2317         else {
2318             char *type;
2319             
2320             if (stb.st_size == 0 || stb.st_atime >= stb.st_mtime ||
2321                 (stb.st_atime <= chktim && stb.st_mtime <= chktim) ||
2322                 (loginsh && !new))
2323                 continue;
2324             type = strsave(new ? CGETS(11, 6, "new ") : "");
2325             cleanup_push(type, xfree);
2326             if (cnt == 1)
2327                 xprintf(CGETS(11, 5, "You have %smail.\n"), type);
2328             else
2329                 xprintf(CGETS(11, 7, "You have %smail in %s.\n"), type, filename);
2330             cleanup_until(type);
2331         }
2332     }
2333     chktim = t;
2334 }
2335
2336 /*
2337  * Extract a home directory from the password file
2338  * The argument points to a buffer where the name of the
2339  * user whose home directory is sought is currently.
2340  * We return home directory of the user, or NULL.
2341  */
2342 Char *
2343 gethdir(const Char *home)
2344 {
2345     Char   *h;
2346
2347     /*
2348      * Is it us?
2349      */
2350     if (*home == '\0') {
2351         if ((h = varval(STRhome)) != STRNULL)
2352             return Strsave(h);
2353         else
2354             return NULL;
2355     }
2356
2357     /*
2358      * Look in the cache
2359      */
2360     if ((h = gettilde(home)) == NULL)
2361         return NULL;
2362     else
2363         return Strsave(h);
2364 }
2365
2366 /*
2367  * Move the initial descriptors to their eventual
2368  * resting places, closing all other units.
2369  */
2370 void
2371 initdesc(void)
2372 {
2373 #ifdef NLS_BUGS
2374 #ifdef NLS_CATALOGS
2375     nlsclose();
2376 #endif /* NLS_CATALOGS */
2377 #endif /* NLS_BUGS */
2378
2379
2380     didfds = 0;                 /* 0, 1, 2 aren't set up */
2381     (void) close_on_exec(SHIN = dcopy(0, FSHIN), 1);
2382     (void) close_on_exec(SHOUT = dcopy(1, FSHOUT), 1);
2383     (void) close_on_exec(SHDIAG = dcopy(2, FSHDIAG), 1);
2384     (void) close_on_exec(OLDSTD = dcopy(SHIN, FOLDSTD), 1);
2385 #ifndef CLOSE_ON_EXEC
2386     didcch = 0;                 /* Havent closed for child */
2387 #endif /* CLOSE_ON_EXEC */
2388     if (SHDIAG >= 0)
2389         isdiagatty = isatty(SHDIAG);
2390     else
2391         isdiagatty = 0;
2392     if (SHDIAG >= 0)
2393         isoutatty = isatty(SHOUT);
2394     else
2395         isoutatty = 0;
2396 #ifdef NLS_BUGS
2397 #ifdef NLS_CATALOGS
2398     nlsinit();
2399 #endif /* NLS_CATALOGS */
2400 #endif /* NLS_BUGS */
2401 }
2402
2403
2404 void
2405 #ifdef PROF
2406 done(int i)
2407 #else
2408 xexit(int i)
2409 #endif
2410 {
2411 #ifdef TESLA
2412     if (loginsh && do_logout) {
2413         /* this is to send hangup signal to the develcon */
2414         /* we toggle DTR. clear dtr - sleep 1 - set dtr */
2415         /* ioctl will return ENOTTY for pty's but we ignore it   */
2416         /* exitstat will run after disconnect */
2417         /* we sleep for 2 seconds to let things happen in */
2418         /* .logout and rechist() */
2419 #ifdef TIOCCDTR
2420         (void) sleep(2);
2421         (void) ioctl(FSHTTY, TIOCCDTR, NULL);
2422         (void) sleep(1);
2423         (void) ioctl(FSHTTY, TIOCSDTR, NULL);
2424 #endif /* TIOCCDTR */
2425     }
2426 #endif /* TESLA */
2427
2428     {
2429         struct process *pp, *np;
2430         pid_t mypid = getpid();
2431         /* Kill all processes marked for hup'ing */
2432         for (pp = proclist.p_next; pp; pp = pp->p_next) {
2433             np = pp;
2434             do
2435                 if ((np->p_flags & PHUP) && np->p_jobid != shpgrp &&
2436                     np->p_parentid == mypid) {
2437                     if (killpg(np->p_jobid, SIGHUP) != -1) {
2438                         /* In case the job was suspended... */
2439 #ifdef SIGCONT
2440                         (void) killpg(np->p_jobid, SIGCONT);
2441 #endif
2442                         break;
2443                     }
2444                 }
2445             while ((np = np->p_friends) != pp);
2446         }
2447     }
2448     untty();
2449 #ifdef NLS_CATALOGS
2450     /*
2451      * We need to call catclose, because SVR4 leaves symlinks behind otherwise
2452      * in the catalog directories. We cannot close on a vforked() child,
2453      * because messages will stop working on the parent too.
2454      */
2455     if (child == 0)
2456         nlsclose();
2457 #endif /* NLS_CATALOGS */
2458 #ifdef WINNT_NATIVE
2459     nt_cleanup();
2460 #endif /* WINNT_NATIVE */
2461     _exit(i);
2462 }
2463
2464 #ifndef _PATH_DEFPATH
2465 static Char **
2466 defaultpath(void)
2467 {
2468     char   *ptr;
2469     Char  **blk, **blkp;
2470     struct stat stb;
2471
2472     blkp = blk = xmalloc(sizeof(Char *) * 10);
2473
2474 #ifndef NODOT
2475 # ifndef DOTLAST
2476     *blkp++ = Strsave(STRdot);
2477 # endif
2478 #endif
2479
2480 #define DIRAPPEND(a)  \
2481         if (stat(ptr = a, &stb) == 0 && S_ISDIR(stb.st_mode)) \
2482                 *blkp++ = SAVE(ptr)
2483
2484 #ifdef _PATH_LOCAL
2485     DIRAPPEND(_PATH_LOCAL);
2486 #endif
2487
2488 #ifdef _PATH_USRUCB
2489     DIRAPPEND(_PATH_USRUCB);
2490 #endif
2491
2492 #ifdef _PATH_USRBSD
2493     DIRAPPEND(_PATH_USRBSD);
2494 #endif
2495
2496 #ifdef _PATH_BIN
2497     DIRAPPEND(_PATH_BIN);
2498 #endif
2499
2500 #ifdef _PATH_USRBIN
2501     DIRAPPEND(_PATH_USRBIN);
2502 #endif
2503
2504 #undef DIRAPPEND
2505
2506 #ifndef NODOT
2507 # ifdef DOTLAST
2508     *blkp++ = Strsave(STRdot);
2509 # endif
2510 #endif
2511     *blkp = NULL;
2512     return (blk);
2513 }
2514 #endif
2515
2516 static void
2517 record(void)
2518 {
2519     if (!fast) {
2520         recdirs(NULL, adrof(STRsavedirs) != NULL);
2521         rechist(NULL, adrof(STRsavehist) != NULL);
2522     }
2523     displayHistStats("Exiting");        /* no-op unless DEBUG_HIST */
2524 }
2525
2526 /*
2527  * Grab the tty repeatedly, and give up if we are not in the correct
2528  * tty process group.
2529  */
2530 int
2531 grabpgrp(int fd, pid_t desired)
2532 {
2533     struct sigaction old;
2534     pid_t pgrp;
2535     size_t i;
2536
2537     for (i = 0; i < 100; i++) {
2538         if ((pgrp = tcgetpgrp(fd)) == -1)
2539             return -1;
2540         if (pgrp == desired)
2541             return 0;
2542         (void)sigaction(SIGTTIN, NULL, &old);
2543         (void)signal(SIGTTIN, SIG_DFL);
2544         (void)kill(0, SIGTTIN);
2545         (void)sigaction(SIGTTIN, &old, NULL);
2546     }
2547     errno = EPERM;
2548     return -1;
2549 }