1 # Make and install tzdb code and data.
3 # This file is in the public domain, so clarified as of
4 # 2009-05-17 by Arthur David Olson.
6 # Package name for the code distribution.
9 # Version number for the distribution, overridden in the 'tarballs' rule below.
12 # Email address for bug reports.
15 # DATAFORM selects the data format.
16 # Available formats represent essentially the same data, albeit
17 # possibly with minor discrepancies that users are not likely to notice.
18 # To get new features and the best data right away, use:
20 # To wait a while before using new features, to give downstream users
21 # time to upgrade zic (the default), use:
23 # To wait even longer for new features, use:
25 # Rearguard users might also want "ZFLAGS = -b fat"; see below.
28 # Change the line below for your timezone (after finding the one you want in
29 # one of the $(TDATA) source files, or adding it to a source file).
30 # Alternatively, if you discover you've got the wrong timezone, you can just
31 # 'zic -l -' to remove it, or 'zic -l rightzone' to change it.
34 # to get a list of the values you can use for LOCALTIME.
38 # The POSIXRULES macro controls interpretation of nonstandard and obsolete
39 # POSIX-like TZ settings like TZ='EET-2EEST' that lack DST transition rules.
40 # Such a setting uses the rules in a template file to determine
41 # "spring forward" and "fall back" days and times; the environment
42 # variable itself specifies UT offsets of standard and daylight saving time.
44 # If POSIXRULES is '-', no template is installed; this is the default.
46 # Any other value for POSIXRULES is obsolete and should not be relied on, as:
47 # * It does not work correctly in popular implementations such as GNU/Linux.
48 # * It does not work in the tzdb implementation for timestamps after 2037.
49 # * It is incompatible with 'zic -b slim' if POSIXRULES specifies transitions
50 # at standard time or UT rather than at local time.
51 # In short, software should avoid ruleless settings like TZ='EET-2EEST'
52 # and so should not depend on the value of POSIXRULES.
54 # If, despite the above, you want a template for handling these settings,
55 # you can change the line below (after finding the timezone you want in the
56 # one of the $(TDATA) source files, or adding it to a source file).
57 # Alternatively, if you discover you've got the wrong timezone, you can just
58 # 'zic -p -' to remove it, or 'zic -p rightzone' to change it.
61 # to get a list of the values you can use for POSIXRULES.
65 # Also see TZDEFRULESTRING below, which takes effect only
66 # if the time zone files cannot be accessed.
69 # Installation locations.
71 # The defaults are suitable for Debian, except that if REDO is
72 # posix_right or right_posix then files that Debian puts under
73 # /usr/share/zoneinfo/posix and /usr/share/zoneinfo/right are instead
74 # put under /usr/share/zoneinfo-posix and /usr/share/zoneinfo-leaps,
75 # respectively. Problems with the Debian approach are discussed in
76 # the commentary for the right_posix rule (below).
78 # Destination directory, which can be used for staging.
79 # 'make DESTDIR=/stage install' installs under /stage (e.g., to
80 # /stage/etc/localtime instead of to /etc/localtime). Files under
81 # /stage are not intended to work as-is, but can be copied by hand to
82 # the root directory later. If DESTDIR is empty, 'make install' does
83 # not stage, but installs directly into production locations.
86 # Everything is installed into subdirectories of TOPDIR, and used there.
87 # TOPDIR should be empty (meaning the root directory),
88 # or a directory name that does not end in "/".
89 # TOPDIR should be empty or an absolute name unless you're just testing.
92 # The default local timezone is taken from the file TZDEFAULT.
93 TZDEFAULT = $(TOPDIR)/etc/localtime
95 # The subdirectory containing installed program and data files, and
96 # likewise for installed files that can be shared among architectures.
97 # These should be relative file names.
99 USRSHAREDIR = $(USRDIR)/share
101 # "Compiled" timezone information is placed in the "TZDIR" directory
102 # (and subdirectories).
103 # TZDIR_BASENAME should not contain "/" and should not be ".", ".." or empty.
104 TZDIR_BASENAME= zoneinfo
105 TZDIR = $(TOPDIR)/$(USRSHAREDIR)/$(TZDIR_BASENAME)
107 # The "tzselect" and (if you do "make INSTALL") "date" commands go in:
108 BINDIR = $(TOPDIR)/$(USRDIR)/bin
110 # The "zdump" command goes in:
113 # The "zic" command goes in:
114 ZICDIR = $(TOPDIR)/$(USRDIR)/sbin
116 # Manual pages go in subdirectories of. . .
117 MANDIR = $(TOPDIR)/$(USRSHAREDIR)/man
119 # Library functions are put in an archive in LIBDIR.
120 LIBDIR = $(TOPDIR)/$(USRDIR)/lib
123 # Types to try, as an alternative to time_t.
124 TIME_T_ALTERNATIVES = $(TIME_T_ALTERNATIVES_HEAD) $(TIME_T_ALTERNATIVES_TAIL)
125 TIME_T_ALTERNATIVES_HEAD = int64_t
126 TIME_T_ALTERNATIVES_TAIL = int32_t uint32_t uint64_t
128 # What kind of TZif data files to generate. (TZif is the binary time
129 # zone data format that zic generates; see Internet RFC 8536.)
130 # If you want only POSIX time, with time values interpreted as
131 # seconds since the epoch (not counting leap seconds), use
133 # below. If you want only "right" time, with values interpreted
134 # as seconds since the epoch (counting leap seconds), use
136 # below. If you want both sets of data available, with leap seconds not
137 # counted normally, use
139 # below. If you want both sets of data available, with leap seconds counted
142 # below. POSIX mandates that leap seconds not be counted; for compatibility
143 # with it, use "posix_only" or "posix_right". Use POSIX time on systems with
144 # leap smearing; this can work better than unsmeared "right" time with
145 # applications that are not leap second aware, and is closer to unsmeared
146 # "right" time than unsmeared POSIX time is (e.g., 0.5 vs 1.0 s max error).
150 # Whether to put an "Expires" line in the leapseconds file.
151 # Use EXPIRES_LINE=1 to put the line in, 0 to omit it.
152 # The EXPIRES_LINE value matters only if REDO's value contains "right".
153 # If you change EXPIRES_LINE, remove the leapseconds file before running "make".
154 # zic's support for the Expires line was introduced in tzdb 2020a,
155 # and EXPIRES_LINE defaults to 0 for now so that the leapseconds file
156 # can be given to older zic implementations.
159 # To install data in text form that has all the information of the TZif data,
160 # (optionally incorporating leap second information), use
161 # TZDATA_TEXT= tzdata.zi leapseconds
162 # To install text data without leap second information (e.g., because
163 # REDO='posix_only'), use
164 # TZDATA_TEXT= tzdata.zi
165 # To avoid installing text data, use
168 TZDATA_TEXT= leapseconds tzdata.zi
170 # For backward-compatibility links for old zone names, use
172 # To omit these links, use
177 # If you want out-of-scope and often-wrong data from the file 'backzone', use
178 # PACKRATDATA= backzone
179 # To omit this data, use
184 # The name of a locale using the UTF-8 encoding, used during self-tests.
185 # The tests are skipped if the name does not appear to work on this system.
187 UTF8_LOCALE= en_US.utf8
189 # Non-default libraries needed to link.
192 # Add the following to the end of the "CFLAGS=" line as needed to override
193 # defaults specified in the source code. "-DFOO" is equivalent to "-DFOO=1".
194 # -DDEPRECATE_TWO_DIGIT_YEARS for optional runtime warnings about strftime
195 # formats that generate only the last two digits of year numbers
196 # -DEPOCH_LOCAL if the 'time' function returns local time not UT
197 # -DEPOCH_OFFSET=N if the 'time' function returns a value N greater
198 # than what POSIX specifies, assuming local time is UT.
199 # For example, N is 252460800 on AmigaOS.
200 # -DHAVE_DECL_ASCTIME_R=0 if <time.h> does not declare asctime_r
201 # -DHAVE_DECL_ENVIRON if <unistd.h> declares 'environ'
202 # -DHAVE_DIRECT_H if mkdir needs <direct.h> (MS-Windows)
203 # -DHAVE_GENERIC=0 if _Generic does not work
204 # -DHAVE_GETTEXT if 'gettext' works (e.g., GNU/Linux, FreeBSD, Solaris)
205 # -DHAVE_INCOMPATIBLE_CTIME_R if your system's time.h declares
206 # ctime_r and asctime_r incompatibly with the POSIX standard
207 # (Solaris when _POSIX_PTHREAD_SEMANTICS is not defined).
208 # -DHAVE_INTTYPES_H if you have a non-C99 compiler with <inttypes.h>
209 # -DHAVE_LINK=0 if your system lacks a link function
210 # -DHAVE_LOCALTIME_R=0 if your system lacks a localtime_r function
211 # -DHAVE_LOCALTIME_RZ=0 if you do not want zdump to use localtime_rz
212 # localtime_rz can make zdump significantly faster, but is nonstandard.
213 # -DHAVE_POSIX_DECLS=0 if your system's include files do not declare
214 # functions like 'link' or variables like 'tzname' required by POSIX
215 # -DHAVE_SNPRINTF=0 if your system lacks the snprintf function
216 # -DHAVE_STDBOOL_H if you have a non-C99 compiler with <stdbool.h>
217 # -DHAVE_STDINT_H if you have a non-C99 compiler with <stdint.h>
218 # -DHAVE_STRFTIME_L if <time.h> declares locale_t and strftime_l
219 # -DHAVE_STRDUP=0 if your system lacks the strdup function
220 # -DHAVE_STRTOLL=0 if your system lacks the strtoll function
221 # -DHAVE_SYMLINK=0 if your system lacks the symlink function
222 # -DHAVE_SYS_STAT_H=0 if your compiler lacks a <sys/stat.h>
223 # -DHAVE_SYS_WAIT_H=0 if your compiler lacks a <sys/wait.h>
224 # -DHAVE_TZSET=0 if your system lacks a tzset function
225 # -DHAVE_UNISTD_H=0 if your compiler lacks a <unistd.h>
226 # -Dlocale_t=XXX if your system uses XXX instead of locale_t
227 # -DRESERVE_STD_EXT_IDS if your platform reserves standard identifiers
228 # with external linkage, e.g., applications cannot define 'localtime'.
229 # -Dssize_t=long on hosts like MS-Windows that lack ssize_t
230 # -DSUPPRESS_TZDIR to not prepend TZDIR to file names; this has
231 # security implications and is not recommended for general use
232 # -DTHREAD_SAFE to make localtime.c thread-safe, as POSIX requires;
233 # not needed by the main-program tz code, which is single-threaded.
234 # Append other compiler flags as needed, e.g., -pthread on GNU/Linux.
235 # -Dtime_tz=\"T\" to use T as the time_t type, rather than the system time_t
236 # This is intended for internal use only; it mangles external names.
237 # -DTZ_DOMAIN=\"foo\" to use "foo" for gettext domain name; default is "tz"
238 # -DTZ_DOMAINDIR=\"/path\" to use "/path" for gettext directory;
239 # the default is system-supplied, typically "/usr/lib/locale"
240 # -DTZDEFRULESTRING=\",date/time,date/time\" to default to the specified
241 # DST transitions if the time zone files cannot be accessed
242 # -DUNINIT_TRAP if reading uninitialized storage can cause problems
243 # other than simply getting garbage data
244 # -DUSE_LTZ=0 to build zdump with the system time zone library
245 # Also set TZDOBJS=zdump.o and CHECK_TIME_T_ALTERNATIVES= below.
246 # -DZIC_BLOAT_DEFAULT=\"fat\" to default zic's -b option to "fat", and
247 # similarly for "slim". Fat TZif files work around incompatibilities
248 # and bugs in some TZif readers, notably readers that mishandle 64-bit
249 # data in TZif files. Slim TZif files are more efficient and do not
250 # work around these incompatibilities and bugs. If not given, the
252 # -DZIC_MAX_ABBR_LEN_WO_WARN=3
253 # (or some other number) to set the maximum time zone abbreviation length
254 # that zic will accept without a warning (the default is 6)
255 # $(GCC_DEBUG_FLAGS) if you are using recent GCC and want lots of checking
256 # Select instrumentation via "make GCC_INSTRUMENT='whatever'".
258 -fsanitize=undefined -fsanitize-address-use-after-scope \
259 -fsanitize-undefined-trap-on-error -fstack-protector
260 GCC_DEBUG_FLAGS = -DGCC_LINT -g3 -O3 -fno-common \
263 -Walloc-size-larger-than=100000 -Warray-bounds=2 \
264 -Wbad-function-cast -Wcast-align=strict -Wdate-time \
265 -Wdeclaration-after-statement -Wdouble-promotion \
266 -Wformat=2 -Wformat-overflow=2 -Wformat-signedness -Wformat-truncation \
267 -Winit-self -Wjump-misses-init -Wlogical-op \
268 -Wmissing-declarations -Wmissing-prototypes -Wnested-externs \
269 -Wold-style-definition -Woverlength-strings -Wpointer-arith \
270 -Wshadow -Wshift-overflow=2 -Wstrict-prototypes -Wstringop-overflow=4 \
271 -Wstringop-truncation -Wsuggest-attribute=cold \
272 -Wsuggest-attribute=const -Wsuggest-attribute=format \
273 -Wsuggest-attribute=malloc \
274 -Wsuggest-attribute=noreturn -Wsuggest-attribute=pure \
275 -Wtrampolines -Wundef -Wuninitialized -Wunused \
276 -Wvariadic-macros -Wvla -Wwrite-strings \
277 -Wno-address -Wno-format-nonliteral -Wno-sign-compare \
278 -Wno-type-limits -Wno-unused-parameter
280 # If your system has a "GMT offset" field in its "struct tm"s
281 # (or if you decide to add such a field in your system's "time.h" file),
282 # add the name to a define such as
283 # -DTM_GMTOFF=tm_gmtoff
284 # to the end of the "CFLAGS=" line. If not defined, the code attempts to
285 # guess TM_GMTOFF from other macros; define NO_TM_GMTOFF to suppress this.
286 # Similarly, if your system has a "zone abbreviation" field, define
288 # and define NO_TM_ZONE to suppress any guessing. These two fields are not
289 # required by POSIX, but are widely available on GNU/Linux and BSD systems.
291 # The next batch of options control support for external variables
292 # exported by tzcode. In practice these variables are less useful
293 # than TM_GMTOFF and TM_ZONE. However, most of them are standardized.
295 # # To omit or support the external variable "tzname", add one of:
296 # # -DHAVE_TZNAME=0 # do not support "tzname"
297 # # -DHAVE_TZNAME=1 # support "tzname", which is defined by system library
298 # # -DHAVE_TZNAME=2 # support and define "tzname"
299 # # to the "CFLAGS=" line. "tzname" is required by POSIX 1988 and later.
300 # # If not defined, the code attempts to guess HAVE_TZNAME from other macros.
301 # # Warning: unless time_tz is also defined, HAVE_TZNAME=1 can cause
302 # # crashes when combined with some platforms' standard libraries,
303 # # presumably due to memory allocation issues.
305 # # To omit or support the external variables "timezone" and "daylight", add
306 # # -DUSG_COMPAT=0 # do not support
307 # # -DUSG_COMPAT=1 # support, and variables are defined by system library
308 # # -DUSG_COMPAT=2 # support and define variables
309 # # to the "CFLAGS=" line; "timezone" and "daylight" are inspired by
310 # # Unix Systems Group code and are required by POSIX 2008 (with XSI) and later.
311 # # If not defined, the code attempts to guess USG_COMPAT from other macros.
313 # # To support the external variable "altzone", add
314 # # -DALTZONE=0 # do not support
315 # # -DALTZONE=1 # support "altzone", which is defined by system library
316 # # -DALTZONE=2 # support and define "altzone"
317 # # to the end of the "CFLAGS=" line; although "altzone" appeared in
318 # # System V Release 3.1 it has not been standardized.
319 # # If not defined, the code attempts to guess ALTZONE from other macros.
321 # If you want functions that were inspired by early versions of X3J11's work,
324 # to the end of the "CFLAGS=" line. This arranges for the functions
325 # "offtime", "timelocal", "timegm", "timeoff",
326 # "posix2time", and "time2posix" to be added to the time conversion library.
327 # "offtime" is like "gmtime" except that it accepts a second (long) argument
328 # that gives an offset to add to the time_t when converting it.
329 # "timelocal" is equivalent to "mktime".
330 # "timegm" is like "timelocal" except that it turns a struct tm into
331 # a time_t using UT (rather than local time as "timelocal" does).
332 # "timeoff" is like "timegm" except that it accepts a second (long) argument
333 # that gives an offset to use when converting to a time_t.
334 # "posix2time" and "time2posix" are described in an included manual page.
335 # X3J11's work does not describe any of these functions.
336 # These functions may well disappear in future releases of the time
337 # conversion package.
339 # If you don't want functions that were inspired by NetBSD, add
340 # -DNETBSD_INSPIRED=0
341 # to the end of the "CFLAGS=" line. Otherwise, the functions
342 # "localtime_rz", "mktime_z", "tzalloc", and "tzfree" are added to the
343 # time library, and if STD_INSPIRED is also defined the functions
344 # "posix2time_z" and "time2posix_z" are added as well.
345 # The functions ending in "_z" (or "_rz") are like their unsuffixed
346 # (or suffixed-by-"_r") counterparts, except with an extra first
347 # argument of opaque type timezone_t that specifies the timezone.
348 # "tzalloc" allocates a timezone_t value, and "tzfree" frees it.
350 # If you want to allocate state structures in localtime, add
352 # to the end of the "CFLAGS=" line. Storage is obtained by calling malloc.
354 # NIST-PCTS:151-2, Version 1.4, (1993-12-03) is a test suite put
355 # out by the National Institute of Standards and Technology
356 # which claims to test C and Posix conformance. If you want to pass PCTS, add
358 # to the end of the "CFLAGS=" line.
360 # If you want strict compliance with XPG4 as of 1994-04-09, add
362 # to the end of the "CFLAGS=" line. This causes "strftime" to always return
363 # 53 as a week number (rather than 52 or 53) for January days before
364 # January's first Monday when a "%V" format is used and January 1
365 # falls on a Friday, Saturday, or Sunday.
369 # Linker flags. Default to $(LFLAGS) for backwards compatibility
370 # to release 2012h and earlier.
374 # For leap seconds, this Makefile uses LEAPSECONDS='-L leapseconds' in
375 # submake command lines. The default is no leap seconds.
379 # The zic command and its arguments.
382 ZIC= $(zic) $(ZFLAGS)
384 # To shrink the size of installed TZif files,
385 # append "-r @N" to omit data before N-seconds-after-the-Epoch.
386 # To grow the files and work around older application bugs, append "-b fat";
387 # see ZIC_BLOAT_DEFAULT above.
388 # See the zic man page for more about -b and -r.
391 # How to use zic to install TZif files.
393 ZIC_INSTALL= $(ZIC) -d '$(DESTDIR)$(TZDIR)' $(LEAPSECONDS)
395 # The name of a Posix-compliant 'awk' on your system.
396 # Older 'mawk' versions, such as the 'mawk' in Ubuntu 16.04, might dump core;
397 # on Ubuntu you can work around this with
401 # The full path name of a Posix-compliant shell, preferably one that supports
402 # the Korn shell's 'select' statement as an extension.
403 # These days, Bash is the most popular.
404 # It should be OK to set this to /bin/sh, on platforms where /bin/sh
405 # lacks 'select' or doesn't completely conform to Posix, but /bin/bash
406 # is typically nicer if it works.
409 # Name of curl <https://curl.haxx.se/>, used for HTML validation.
412 # Name of GNU Privacy Guard <https://gnupg.org/>, used to sign distributions.
415 # This expensive test requires USE_LTZ.
416 # To suppress it, define this macro to be empty.
417 CHECK_TIME_T_ALTERNATIVES = check_time_t_alternatives
419 # SAFE_CHAR is a regular expression that matches a safe character.
420 # Some parts of this distribution are limited to safe characters;
421 # others can use any UTF-8 character.
422 # For now, the safe characters are a safe subset of ASCII.
423 # The caller must set the shell variable 'sharp' to the character '#',
424 # since Makefile macros cannot contain '#'.
425 # TAB_CHAR is a single tab character, in single quotes.
427 SAFE_CHARSET1= $(TAB_CHAR)' !\"'$$sharp'$$%&'\''()*+,./0123456789:;<=>?@'
428 SAFE_CHARSET2= 'ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\^_`'
429 SAFE_CHARSET3= 'abcdefghijklmnopqrstuvwxyz{|}~'
430 SAFE_CHARSET= $(SAFE_CHARSET1)$(SAFE_CHARSET2)$(SAFE_CHARSET3)
431 SAFE_CHAR= '[]'$(SAFE_CHARSET)'-]'
433 # These characters are Latin-1, and so are likely to be displayable
434 # even in editors with limited character sets.
435 UNUSUAL_OK_LATIN_1 = «°±»½¾×
436 # This IPA symbol is represented in Unicode as the composition of
437 # U+0075 and U+032F, and U+032F is not considered alphabetic by some
438 # grep implementations that do not grok composition.
440 # Non-ASCII non-letters that OK_CHAR allows, as these characters are
441 # useful in commentary.
442 UNUSUAL_OK_CHARSET= $(UNUSUAL_OK_LATIN_1)$(UNUSUAL_OK_IPA)
444 # OK_CHAR matches any character allowed in the distributed files.
445 # This is the same as SAFE_CHAR, except that UNUSUAL_OK_CHARSET and
446 # multibyte letters are also allowed so that commentary can contain a
447 # few safe symbols and people's names and can quote non-English sources.
448 # Other non-letters are limited to ASCII renderings for the
449 # convenience of maintainers using XEmacs 21.5.34, which by default
450 # mishandles Unicode characters U+0100 and greater.
451 OK_CHAR= '[][:alpha:]$(UNUSUAL_OK_CHARSET)'$(SAFE_CHARSET)'-]'
453 # SAFE_LINE matches a line of safe characters.
454 # SAFE_SHARP_LINE is similar, except any OK character can follow '#';
455 # this is so that comments can contain non-ASCII characters.
456 # OK_LINE matches a line of OK characters.
457 SAFE_LINE= '^'$(SAFE_CHAR)'*$$'
458 SAFE_SHARP_LINE='^'$(SAFE_CHAR)'*('$$sharp$(OK_CHAR)'*)?$$'
459 OK_LINE= '^'$(OK_CHAR)'*$$'
461 # Flags to give 'tar' when making a distribution.
462 # Try to use flags appropriate for GNU tar.
463 GNUTARFLAGS= --numeric-owner --owner=0 --group=0 --mode=go+u,go-w --sort=name
464 TARFLAGS= `if tar $(GNUTARFLAGS) --version >/dev/null 2>&1; \
465 then echo $(GNUTARFLAGS); \
469 # Flags to give 'gzip' when making a distribution.
472 ###############################################################################
477 CC= $(cc) -DTZDIR='"$(TZDIR)"'
481 # ':' on typical hosts; 'ranlib' on the ancient hosts that still need ranlib.
485 TZDOBJS= zdump.o localtime.o asctime.o strftime.o
486 DATEOBJS= date.o localtime.o strftime.o asctime.o
487 LIBSRCS= localtime.c asctime.c difftime.c strftime.c
488 LIBOBJS= localtime.o asctime.o difftime.o strftime.o
489 HEADERS= tzfile.h private.h
490 NONLIBSRCS= zic.c zdump.c
492 SOURCES= $(HEADERS) $(LIBSRCS) $(NONLIBSRCS) $(NEWUCBSRCS) \
493 tzselect.ksh workman.sh
494 MANS= newctime.3 newstrftime.3 newtzset.3 time2posix.3 \
495 tzfile.5 tzselect.8 zic.8 zdump.8
496 MANTXTS= newctime.3.txt newstrftime.3.txt newtzset.3.txt \
498 tzfile.5.txt tzselect.8.txt zic.8.txt zdump.8.txt \
500 COMMON= calendars CONTRIBUTING LICENSE Makefile \
501 NEWS README theory.html version
502 WEB_PAGES= tz-art.html tz-how-to.html tz-link.html
503 CHECK_WEB_PAGES=check_theory.html check_tz-art.html \
504 check_tz-how-to.html check_tz-link.html
505 DOCS= $(MANS) date.1 $(MANTXTS) $(WEB_PAGES)
506 PRIMARY_YDATA= africa antarctica asia australasia \
507 europe northamerica southamerica
508 YDATA= $(PRIMARY_YDATA) etcetera
510 TDATA_TO_CHECK= $(YDATA) $(NDATA) backward
511 TDATA= $(YDATA) $(NDATA) $(BACKWARD)
512 ZONETABLES= zone1970.tab zone.tab
513 TABDATA= iso3166.tab $(TZDATA_TEXT) $(ZONETABLES)
514 LEAP_DEPS= leapseconds.awk leap-seconds.list
515 TZDATA_ZI_DEPS= ziguard.awk zishrink.awk version $(TDATA) $(PACKRATDATA)
516 DSTDATA_ZI_DEPS= ziguard.awk $(TDATA) $(PACKRATDATA)
517 DATA= $(TDATA_TO_CHECK) backzone iso3166.tab leap-seconds.list \
518 leapseconds $(ZONETABLES)
519 AWK_SCRIPTS= checklinks.awk checktab.awk leapseconds.awk \
520 ziguard.awk zishrink.awk
521 MISC= $(AWK_SCRIPTS) zoneinfo2tdf.pl
523 TZS_CUTOFF_FLAG= -c $(TZS_YEAR)
524 TZS= to$(TZS_YEAR).tzs
525 TZS_NEW= to$(TZS_YEAR)new.tzs
526 TZS_DEPS= $(PRIMARY_YDATA) asctime.c localtime.c \
527 private.h tzfile.h zdump.c zic.c
528 # EIGHT_YARDS is just a yard short of the whole ENCHILADA.
529 EIGHT_YARDS = $(COMMON) $(DOCS) $(SOURCES) $(DATA) $(MISC) tzdata.zi
530 ENCHILADA = $(EIGHT_YARDS) $(TZS)
532 # Consult these files when deciding whether to rebuild the 'version' file.
533 # This list is not the same as the output of 'git ls-files', since
534 # .gitignore is not distributed.
536 calendars CONTRIBUTING LICENSE Makefile NEWS README \
537 africa antarctica asctime.c asia australasia \
539 checklinks.awk checktab.awk \
540 date.1 date.c difftime.c \
541 etcetera europe factory iso3166.tab \
542 leap-seconds.list leapseconds.awk localtime.c \
543 newctime.3 newstrftime.3 newtzset.3 northamerica \
544 private.h southamerica strftime.c theory.html \
545 time2posix.3 tz-art.html tz-how-to.html tz-link.html \
546 tzfile.5 tzfile.h tzselect.8 tzselect.ksh \
547 workman.sh zdump.8 zdump.c zic.8 zic.c \
548 ziguard.awk zishrink.awk \
549 zone.tab zone1970.tab zoneinfo2tdf.pl
551 # And for the benefit of csh users on systems that assume the user
552 # shell should be used to handle commands in Makefiles. . .
556 all: tzselect zic zdump libtz.a $(TABDATA) \
557 vanguard.zi main.zi rearguard.zi
559 ALL: all date $(ENCHILADA)
561 install: all $(DATA) $(REDO) $(MANS)
562 mkdir -p '$(DESTDIR)$(BINDIR)' \
563 '$(DESTDIR)$(ZDUMPDIR)' '$(DESTDIR)$(ZICDIR)' \
564 '$(DESTDIR)$(LIBDIR)' \
565 '$(DESTDIR)$(MANDIR)/man3' '$(DESTDIR)$(MANDIR)/man5' \
566 '$(DESTDIR)$(MANDIR)/man8'
567 $(ZIC_INSTALL) -l $(LOCALTIME) \
568 `case '$(POSIXRULES)' in ?*) echo '-p';; esac \
570 -t '$(DESTDIR)$(TZDEFAULT)'
571 cp -f $(TABDATA) '$(DESTDIR)$(TZDIR)/.'
572 cp tzselect '$(DESTDIR)$(BINDIR)/.'
573 cp zdump '$(DESTDIR)$(ZDUMPDIR)/.'
574 cp zic '$(DESTDIR)$(ZICDIR)/.'
575 cp libtz.a '$(DESTDIR)$(LIBDIR)/.'
576 $(RANLIB) '$(DESTDIR)$(LIBDIR)/libtz.a'
577 cp -f newctime.3 newtzset.3 '$(DESTDIR)$(MANDIR)/man3/.'
578 cp -f tzfile.5 '$(DESTDIR)$(MANDIR)/man5/.'
579 cp -f tzselect.8 zdump.8 zic.8 '$(DESTDIR)$(MANDIR)/man8/.'
581 INSTALL: ALL install date.1
582 mkdir -p '$(DESTDIR)$(BINDIR)' '$(DESTDIR)$(MANDIR)/man1'
583 cp date '$(DESTDIR)$(BINDIR)/.'
584 cp -f date.1 '$(DESTDIR)$(MANDIR)/man1/.'
586 version: $(VERSION_DEPS)
587 { (type git) >/dev/null 2>&1 && \
588 V=`git describe --match '[0-9][0-9][0-9][0-9][a-z]*' \
589 --abbrev=7 --dirty` || \
590 V='$(VERSION)'; } && \
591 printf '%s\n' "$$V" >$@.out
594 # These files can be tailored by setting BACKWARD and PACKRATDATA.
595 vanguard.zi main.zi rearguard.zi: $(DSTDATA_ZI_DEPS)
596 $(AWK) -v DATAFORM=`expr $@ : '\(.*\).zi'` -f ziguard.awk \
597 $(TDATA) $(PACKRATDATA) >$@.out
599 # This file has a version comment that attempts to capture any tailoring
600 # via BACKWARD, DATAFORM, PACKRATDATA, and REDO.
601 tzdata.zi: $(DATAFORM).zi version zishrink.awk
602 version=`sed 1q version` && \
604 -v dataform='$(DATAFORM)' \
605 -v deps='$(DSTDATA_ZI_DEPS) zishrink.awk' \
607 -v version="$$version" \
609 $(DATAFORM).zi >$@.out
613 VERSION=`cat version` && printf '%s\n' \
614 'static char const PKGVERSION[]="($(PACKAGE)) ";' \
615 "static char const TZVERSION[]=\"$$VERSION\";" \
616 'static char const REPORT_BUGS_TO[]="$(BUGEMAIL)";' \
621 $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(TZDOBJS) $(LDLIBS)
624 $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(TZCOBJS) $(LDLIBS)
626 leapseconds: $(LEAP_DEPS)
627 $(AWK) -v EXPIRES_LINE=$(EXPIRES_LINE) \
628 -f leapseconds.awk leap-seconds.list >$@.out
631 # Arguments to pass to submakes of install_data.
632 # They can be overridden by later submake arguments.
634 BACKWARD='$(BACKWARD)' \
635 DESTDIR='$(DESTDIR)' \
636 LEAPSECONDS='$(LEAPSECONDS)' \
637 PACKRATDATA='$(PACKRATDATA)' \
638 TZDEFAULT='$(TZDEFAULT)' \
642 INSTALL_DATA_DEPS = zic leapseconds tzdata.zi
644 # 'make install_data' installs one set of TZif files.
645 install_data: $(INSTALL_DATA_DEPS)
646 $(ZIC_INSTALL) tzdata.zi
648 posix_only: $(INSTALL_DATA_DEPS)
649 $(MAKE) $(INSTALLARGS) LEAPSECONDS= install_data
651 right_only: $(INSTALL_DATA_DEPS)
652 $(MAKE) $(INSTALLARGS) LEAPSECONDS='-L leapseconds' \
655 # In earlier versions of this makefile, the other two directories were
656 # subdirectories of $(TZDIR). However, this led to configuration errors.
657 # For example, with posix_right under the earlier scheme,
658 # TZ='right/Australia/Adelaide' got you localtime with leap seconds,
659 # but gmtime without leap seconds, which led to problems with applications
660 # like sendmail that subtract gmtime from localtime.
661 # Therefore, the other two directories are now siblings of $(TZDIR).
662 # You must replace all of $(TZDIR) to switch from not using leap seconds
663 # to using them, or vice versa.
664 right_posix: right_only
665 rm -fr '$(DESTDIR)$(TZDIR)-leaps'
666 ln -s '$(TZDIR_BASENAME)' '$(DESTDIR)$(TZDIR)-leaps' || \
667 $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-leaps' right_only
668 $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-posix' posix_only
670 posix_right: posix_only
671 rm -fr '$(DESTDIR)$(TZDIR)-posix'
672 ln -s '$(TZDIR_BASENAME)' '$(DESTDIR)$(TZDIR)-posix' || \
673 $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-posix' posix_only
674 $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-leaps' right_only
676 # This obsolescent rule is present for backwards compatibility with
677 # tz releases 2014g through 2015g. It should go away eventually.
678 posix_packrat: $(INSTALL_DATA_DEPS)
679 $(MAKE) $(INSTALLARGS) PACKRATDATA=backzone posix_only
683 # dummy.zd is not a real file; it is mentioned here only so that the
684 # top-level 'make' does not have a syntax error.
686 # Rule used only by submakes invoked by the $(TZS_NEW) rule.
687 # It is separate so that GNU 'make -j' can run instances in parallel.
689 ./zdump -i $(TZS_CUTOFF_FLAG) '$(wd)/'$$(expr $@ : '\(.*\).zd') \
692 TZS_NEW_DEPS = tzdata.zi zdump zic
693 $(TZS_NEW): $(TZS_NEW_DEPS)
694 rm -fr tzs$(TZS_YEAR).dir
695 mkdir tzs$(TZS_YEAR).dir
696 $(zic) -d tzs$(TZS_YEAR).dir tzdata.zi
697 $(AWK) '/^L/{print "Link\t" $$2 "\t" $$3}' \
698 tzdata.zi | LC_ALL=C sort >$@.out
700 x=`$(AWK) '/^Z/{print "tzs$(TZS_YEAR).dir/" $$2 ".zd"}' \
702 | LC_ALL=C sort -t . -k 2,2` && \
706 $(MAKE) wd="$$wd" TZS_CUTOFF_FLAG="$(TZS_CUTOFF_FLAG)" \
707 ZDS="$$ZDS" $$ZDS && \
708 sed 's,^TZ=".*\.dir/,TZ=",' $$ZDS >>$@.out
709 rm -fr tzs$(TZS_YEAR).dir
712 # If $(TZS) exists but 'make check_tzs' fails, a maintainer should inspect the
713 # failed output and fix the inconsistency, perhaps by running 'make force_tzs'.
717 force_tzs: $(TZS_NEW)
722 $(AR) -rc $@ $(LIBOBJS)
726 $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(DATEOBJS) $(LDLIBS)
728 tzselect: tzselect.ksh version
729 VERSION=`cat version` && sed \
730 -e 's|#!/bin/bash|#!$(KSHELL)|g' \
731 -e 's|AWK=[^}]*|AWK=$(AWK)|g' \
732 -e 's|\(PKGVERSION\)=.*|\1='\''($(PACKAGE)) '\''|' \
733 -e 's|\(REPORT_BUGS_TO\)=.*|\1=$(BUGEMAIL)|' \
734 -e 's|TZDIR=[^}]*|TZDIR=$(TZDIR)|' \
735 -e 's|\(TZVERSION\)=.*|\1='"$$VERSION"'|' \
740 check: check_character_set check_white_space check_links \
741 check_name_lengths check_sorted \
742 check_tables check_web check_zishrink check_tzs
744 check_character_set: $(ENCHILADA)
745 test ! '$(UTF8_LOCALE)' || \
746 ! printf 'A\304\200B\n' | \
747 LC_ALL='$(UTF8_LOCALE)' grep -q '^A.B$$' >/dev/null 2>&1 || { \
748 LC_ALL='$(UTF8_LOCALE)' && export LC_ALL && \
750 ! grep -Env $(SAFE_LINE) $(MANS) date.1 $(MANTXTS) \
751 $(MISC) $(SOURCES) $(WEB_PAGES) \
752 CONTRIBUTING LICENSE README \
753 version tzdata.zi && \
754 ! grep -Env $(SAFE_LINE)'|^UNUSUAL_OK_'$(OK_CHAR)'*$$' \
756 ! grep -Env $(SAFE_SHARP_LINE) $(TDATA_TO_CHECK) backzone \
757 leapseconds zone.tab && \
758 ! grep -Env $(OK_LINE) $(ENCHILADA); \
762 check_white_space: $(ENCHILADA)
763 patfmt=' \t|[\f\r\v]' && pat=`printf "$$patfmt\\n"` && \
765 $$(ls $(ENCHILADA) | grep -Fvx leap-seconds.list)
766 ! grep -n '[[:space:]]$$' \
767 $$(ls $(ENCHILADA) | grep -Fvx leap-seconds.list)
770 PRECEDES_FILE_NAME = ^(Zone|Link[[:space:]]+[^[:space:]]+)[[:space:]]+
771 FILE_NAME_COMPONENT_TOO_LONG = \
772 $(PRECEDES_FILE_NAME)[^[:space:]]*[^/[:space:]]{15}
774 check_name_lengths: $(TDATA_TO_CHECK) backzone
775 ! grep -En '$(FILE_NAME_COMPONENT_TOO_LONG)' \
776 $(TDATA_TO_CHECK) backzone
779 CHECK_CC_LIST = { n = split($$1,a,/,/); for (i=2; i<=n; i++) print a[1], a[i]; }
781 check_sorted: backward backzone iso3166.tab zone.tab zone1970.tab
782 $(AWK) '/^Link/ {print $$3}' backward | LC_ALL=C sort -cu
783 $(AWK) '/^Zone/ {print $$2}' backzone | LC_ALL=C sort -cu
786 check_links: checklinks.awk $(TDATA_TO_CHECK) tzdata.zi
787 $(AWK) -f checklinks.awk $(TDATA_TO_CHECK)
788 $(AWK) -f checklinks.awk tzdata.zi
791 check_tables: checktab.awk $(PRIMARY_YDATA) $(ZONETABLES)
792 for tab in $(ZONETABLES); do \
793 $(AWK) -f checktab.awk -v zone_table=$$tab $(PRIMARY_YDATA) \
798 check_tzs: $(TZS) $(TZS_NEW)
799 if test -s $(TZS); then \
800 diff -u $(TZS) $(TZS_NEW); \
802 cp $(TZS_NEW) $(TZS); \
806 check_web: $(CHECK_WEB_PAGES)
807 check_theory.html: theory.html
808 check_tz-art.html: tz-art.html
809 check_tz-how-to.html: tz-how-to.html
810 check_tz-link.html: tz-link.html
811 check_theory.html check_tz-art.html check_tz-how-to.html check_tz-link.html:
812 $(CURL) -sS --url https://validator.w3.org/nu/ -F out=gnu \
813 -F file=@$$(expr $@ : 'check_\(.*\)') -o $@.out && \
814 test ! -s $@.out || { cat $@.out; exit 1; }
817 # Check that zishrink.awk does not alter the data, and that ziguard.awk
818 # preserves main-format data.
819 check_zishrink: check_zishrink_posix check_zishrink_right
820 check_zishrink_posix check_zishrink_right: \
821 zic leapseconds $(PACKRATDATA) $(TDATA) $(DATAFORM).zi tzdata.zi
822 rm -fr $@.dir $@-t.dir $@-shrunk.dir
823 mkdir $@.dir $@-t.dir $@-shrunk.dir
825 *_right) leap='-L leapseconds';; \
828 $(ZIC) $$leap -d $@.dir $(DATAFORM).zi && \
829 $(ZIC) $$leap -d $@-shrunk.dir tzdata.zi && \
830 case $(DATAFORM) in \
832 $(ZIC) $$leap -d $@-t.dir $(TDATA) && \
833 $(AWK) '/^Rule/' $(TDATA) | \
834 $(ZIC) $$leap -d $@-t.dir - $(PACKRATDATA) && \
835 diff -r $@.dir $@-t.dir;; \
837 diff -r $@.dir $@-shrunk.dir
838 rm -fr $@.dir $@-t.dir $@-shrunk.dir
843 rm -f *.o *.out $(TIME_T_ALTERNATIVES) \
844 check_* core typecheck_* \
845 date tzselect version.h zdump zic libtz.a
848 rm -f *.zi $(TZS_NEW)
850 maintainer-clean: clean
851 @echo 'This command is intended for maintainers to use; it'
852 @echo 'deletes files that may need special tools to rebuild.'
853 rm -f leapseconds version $(MANTXTS) $(TZS) *.asc *.tar.*
858 public: check check_public $(CHECK_TIME_T_ALTERNATIVES) \
862 newctime.3.txt: newctime.3
863 newstrftime.3.txt: newstrftime.3
864 newtzset.3.txt: newtzset.3
865 time2posix.3.txt: time2posix.3
866 tzfile.5.txt: tzfile.5
867 tzselect.8.txt: tzselect.8
871 $(MANTXTS): workman.sh
872 LC_ALL=C sh workman.sh `expr $@ : '\(.*\)\.txt$$'` >$@.out
875 # Set the timestamps to those of the git repository, if available,
876 # and if the files have not changed since then.
877 # This uses GNU 'touch' syntax 'touch -d@N FILE',
878 # where N is the number of seconds since 1970.
879 # If git or GNU 'touch' is absent, don't bother to sync with git timestamps.
880 # Also, set the timestamp of each prebuilt file like 'leapseconds'
881 # to be the maximum of the files it depends on.
882 set-timestamps.out: $(EIGHT_YARDS)
884 if (type git) >/dev/null 2>&1 && \
885 files=`git ls-files $(EIGHT_YARDS)` && \
886 touch -md @1 test.out; then \
888 for file in $$files; do \
889 if git diff --quiet $$file; then \
890 time=`git log -1 --format='tformat:%ct' $$file` && \
891 touch -cmd @$$time $$file; \
893 echo >&2 "$$file: warning: does not match repository"; \
897 touch -cmr `ls -t $(LEAP_DEPS) | sed 1q` leapseconds
898 for file in `ls $(MANTXTS) | sed 's/\.txt$$//'`; do \
899 touch -cmr `ls -t $$file workman.sh | sed 1q` $$file.txt || \
902 touch -cmr `ls -t $(TZDATA_ZI_DEPS) | sed 1q` tzdata.zi
903 touch -cmr `ls -t $(VERSION_DEPS) | sed 1q` version
905 set-tzs-timestamp.out: $(TZS)
906 touch -cmr `ls -t $(TZS_DEPS) | sed 1q` $(TZS)
909 # The zics below ensure that each data file can stand on its own.
910 # We also do an all-files run to catch links to links.
912 check_public: $(VERSION_DEPS)
915 ln $(VERSION_DEPS) public.dir
916 cd public.dir && $(MAKE) CFLAGS='$(GCC_DEBUG_FLAGS)' ALL
917 for i in $(TDATA_TO_CHECK) public.dir/tzdata.zi; do \
918 public.dir/zic -v -d public.dir/zoneinfo $$i 2>&1 || exit; \
920 public.dir/zic -v -d public.dir/zoneinfo-all $(TDATA_TO_CHECK)
924 # Check that the code works under various alternative
925 # implementations of time_t.
926 check_time_t_alternatives: $(TIME_T_ALTERNATIVES)
927 $(TIME_T_ALTERNATIVES_TAIL): $(TIME_T_ALTERNATIVES_HEAD)
928 $(TIME_T_ALTERNATIVES): $(VERSION_DEPS)
931 ln $(VERSION_DEPS) $@.dir
933 int32_t) range=-2147483648,2147483648;; \
934 u*) range=0,4294967296;; \
935 *) range=-4294967296,4294967296;; \
938 zones=`$(AWK) '/^[^#]/ { print $$3 }' <zone1970.tab` && \
939 if test $@ = $(TIME_T_ALTERNATIVES_HEAD); then \
942 range_target=to$$range.tzs; \
945 $(MAKE) TOPDIR="$$wd/$@.dir" \
946 CFLAGS='$(CFLAGS) -Dtime_tz='"'$@'" \
949 TZS_YEAR="$$range" TZS_CUTOFF_FLAG="-t $$range" \
950 install $$range_target) && \
951 test $@ = $(TIME_T_ALTERNATIVES_HEAD) || { \
952 (cd $(TIME_T_ALTERNATIVES_HEAD).dir && \
953 $(MAKE) TOPDIR="$$wd/$@.dir" \
954 TZS_YEAR="$$range" TZS_CUTOFF_FLAG="-t $$range" \
957 diff -u $(TIME_T_ALTERNATIVES_HEAD).dir/to$$range.tzs \
958 $@.dir/to$$range.tzs && \
959 if diff -q Makefile Makefile 2>/dev/null; then \
964 diff $$quiet_option -r $(TIME_T_ALTERNATIVES_HEAD).dir/etc \
966 diff $$quiet_option -r \
967 $(TIME_T_ALTERNATIVES_HEAD).dir/usr/share \
973 tzcode$(VERSION).tar.gz.asc \
974 tzdata$(VERSION).tar.gz.asc
976 tzdata$(VERSION)-rearguard.tar.gz.asc
977 ALL_ASC = $(TRADITIONAL_ASC) $(REARGUARD_ASC) \
978 tzdb-$(VERSION).tar.lz.asc
980 tarballs rearguard_tarballs traditional_tarballs \
981 signatures rearguard_signatures traditional_signatures: \
982 version set-timestamps.out rearguard.zi
983 VERSION=`cat version` && \
984 $(MAKE) VERSION="$$VERSION" $@_version
986 # These *_version rules are intended for use if VERSION is set by some
987 # other means. Ordinarily these rules are used only by the above
988 # non-_version rules, which set VERSION on the 'make' command line.
989 tarballs_version: traditional_tarballs_version rearguard_tarballs_version \
990 tzdb-$(VERSION).tar.lz
991 rearguard_tarballs_version: \
992 tzdata$(VERSION)-rearguard.tar.gz
993 traditional_tarballs_version: \
994 tzcode$(VERSION).tar.gz tzdata$(VERSION).tar.gz
995 signatures_version: $(ALL_ASC)
996 rearguard_signatures_version: $(REARGUARD_ASC)
997 traditional_signatures_version: $(TRADITIONAL_ASC)
999 tzcode$(VERSION).tar.gz: set-timestamps.out
1000 LC_ALL=C && export LC_ALL && \
1001 tar $(TARFLAGS) -cf - \
1002 $(COMMON) $(DOCS) $(SOURCES) | \
1003 gzip $(GZIPFLAGS) >$@.out
1006 tzdata$(VERSION).tar.gz: set-timestamps.out
1007 LC_ALL=C && export LC_ALL && \
1008 tar $(TARFLAGS) -cf - $(COMMON) $(DATA) $(MISC) | \
1009 gzip $(GZIPFLAGS) >$@.out
1012 tzdata$(VERSION)-rearguard.tar.gz: rearguard.zi set-timestamps.out
1013 rm -fr tzdata$(VERSION)-rearguard.dir
1014 mkdir tzdata$(VERSION)-rearguard.dir
1015 ln $(COMMON) $(DATA) $(MISC) tzdata$(VERSION)-rearguard.dir
1016 cd tzdata$(VERSION)-rearguard.dir && \
1017 rm -f $(TDATA) $(PACKRATDATA) version
1018 for f in $(TDATA) $(PACKRATDATA); do \
1019 rearf=tzdata$(VERSION)-rearguard.dir/$$f; \
1020 $(AWK) -v DATAFORM=rearguard -f ziguard.awk $$f >$$rearf && \
1021 touch -cmr `ls -t ziguard.awk $$f` $$rearf || exit; \
1023 sed '1s/$$/-rearguard/' \
1024 <version >tzdata$(VERSION)-rearguard.dir/version
1025 : The dummy pacificnew pacifies TZUpdater 2.3.1 and earlier.
1026 TZ=UTC0 touch -mt 202010122253.00 \
1027 tzdata$(VERSION)-rearguard.dir/pacificnew
1028 touch -cmr version tzdata$(VERSION)-rearguard.dir/version
1029 LC_ALL=C && export LC_ALL && \
1030 (cd tzdata$(VERSION)-rearguard.dir && \
1031 tar $(TARFLAGS) -cf - \
1032 $(COMMON) $(DATA) $(MISC) pacificnew | \
1033 gzip $(GZIPFLAGS)) >$@.out
1036 tzdb-$(VERSION).tar.lz: set-timestamps.out set-tzs-timestamp.out
1037 rm -fr tzdb-$(VERSION)
1038 mkdir tzdb-$(VERSION)
1039 ln $(ENCHILADA) tzdb-$(VERSION)
1040 touch -cmr `ls -t tzdb-$(VERSION)/* | sed 1q` tzdb-$(VERSION)
1041 LC_ALL=C && export LC_ALL && \
1042 tar $(TARFLAGS) -cf - tzdb-$(VERSION) | lzip -9 >$@.out
1045 tzcode$(VERSION).tar.gz.asc: tzcode$(VERSION).tar.gz
1046 tzdata$(VERSION).tar.gz.asc: tzdata$(VERSION).tar.gz
1047 tzdata$(VERSION)-rearguard.tar.gz.asc: tzdata$(VERSION)-rearguard.tar.gz
1048 tzdb-$(VERSION).tar.lz.asc: tzdb-$(VERSION).tar.lz
1050 $(GPG) --armor --detach-sign $?
1052 TYPECHECK_CFLAGS = $(CFLAGS) -DTYPECHECK -D__time_t_defined -D_TIME_T
1053 typecheck: typecheck_long_long typecheck_unsigned
1054 typecheck_long_long typecheck_unsigned: $(VERSION_DEPS)
1057 ln $(VERSION_DEPS) $@.dir
1060 *_long_long) i="long long";; \
1061 *_unsigned ) i="unsigned" ;; \
1063 typecheck_cflags='' && \
1065 CFLAGS="$(TYPECHECK_CFLAGS) \"-Dtime_t=$$i\"" \
1068 $@.dir/zdump -i -c 1970,1971 Europe/Rome
1071 zonenames: tzdata.zi
1072 @$(AWK) '/^Z/ { print $$2 } /^L/ { print $$3 }' tzdata.zi
1074 asctime.o: private.h tzfile.h
1076 difftime.o: private.h
1077 localtime.o: private.h tzfile.h
1078 strftime.o: private.h tzfile.h
1080 zic.o: private.h tzfile.h version.h
1084 .PHONY: ALL INSTALL all
1085 .PHONY: check check_time_t_alternatives
1086 .PHONY: check_web check_zishrink
1087 .PHONY: clean clean_misc dummy.zd force_tzs
1088 .PHONY: install install_data maintainer-clean names
1089 .PHONY: posix_only posix_packrat posix_right public
1090 .PHONY: rearguard_signatures rearguard_signatures_version
1091 .PHONY: rearguard_tarballs rearguard_tarballs_version
1092 .PHONY: right_only right_posix signatures signatures_version
1093 .PHONY: tarballs tarballs_version
1094 .PHONY: traditional_signatures traditional_signatures_version
1095 .PHONY: traditional_tarballs traditional_tarballs_version
1097 .PHONY: zonenames zones