1 # Example hostapd build time configuration
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cass, these lines should use += in order not
10 # to override previous values of the variables.
12 # Driver interface for Host AP driver
13 CONFIG_DRIVER_HOSTAP=y
15 # Driver interface for wired authenticator
16 #CONFIG_DRIVER_WIRED=y
18 # Driver interface for madwifi driver
19 #CONFIG_DRIVER_MADWIFI=y
20 #CFLAGS += -I../../madwifi # change to the madwifi source directory
22 # Driver interface for drivers using the nl80211 kernel interface
23 CONFIG_DRIVER_NL80211=y
25 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
27 #CFLAGS += -I/usr/local/include
28 #LIBS += -L/usr/local/lib
29 #LIBS_p += -L/usr/local/lib
30 #LIBS_c += -L/usr/local/lib
32 # Driver interface for no driver (e.g., RADIUS server only)
38 # WPA2/IEEE 802.11i RSN pre-authentication
41 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
44 # IEEE 802.11w (management frame protection)
45 # This version is an experimental implementation based on IEEE 802.11w/D1.0
46 # draft and is subject to change since the standard has not yet been finalized.
47 # Driver support is also needed for IEEE 802.11w.
50 # Integrated EAP server
53 # EAP-MD5 for the integrated EAP server
56 # EAP-TLS for the integrated EAP server
59 # EAP-MSCHAPv2 for the integrated EAP server
62 # EAP-PEAP for the integrated EAP server
65 # EAP-GTC for the integrated EAP server
68 # EAP-TTLS for the integrated EAP server
71 # EAP-SIM for the integrated EAP server
74 # EAP-AKA for the integrated EAP server
77 # EAP-AKA' for the integrated EAP server
78 # This requires CONFIG_EAP_AKA to be enabled, too.
79 #CONFIG_EAP_AKA_PRIME=y
81 # EAP-PAX for the integrated EAP server
84 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
87 # EAP-pwd for the integrated EAP server (secure authentication with a password)
90 # EAP-SAKE for the integrated EAP server
93 # EAP-GPSK for the integrated EAP server
95 # Include support for optional SHA256 cipher suite in EAP-GPSK
96 #CONFIG_EAP_GPSK_SHA256=y
98 # EAP-FAST for the integrated EAP server
99 # Note: Default OpenSSL package does not include support for all the
100 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
101 # the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
102 # to add the needed functions.
105 # Wi-Fi Protected Setup (WPS)
107 # Enable WSC 2.0 support
109 # Enable UPnP support for external WPS Registrars
111 # Enable WPS support with NFC config method
117 # Trusted Network Connect (EAP-TNC)
120 # PKCS#12 (PFX) support (used to read private key and certificate file from
121 # a file that usually has extension .p12 or .pfx)
124 # RADIUS authentication server. This provides access to the integrated EAP
125 # server from external hosts using RADIUS.
126 #CONFIG_RADIUS_SERVER=y
128 # Build IPv6 support for RADIUS operations
131 # IEEE Std 802.11r-2008 (Fast BSS Transition)
134 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
135 # the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
136 #CONFIG_DRIVER_RADIUS_ACL=y
138 # IEEE 802.11n (High Throughput) support
141 # Wireless Network Management (IEEE Std 802.11v-2011)
142 # Note: This is experimental and not complete implementation.
145 # IEEE 802.11ac (Very High Throughput) support
146 #CONFIG_IEEE80211AC=y
148 # Remove debugging code that is printing out debug messages to stdout.
149 # This can be used to reduce the size of the hostapd considerably if debugging
150 # code is not needed.
151 #CONFIG_NO_STDOUT_DEBUG=y
153 # Add support for writing debug log to a file: -f /tmp/hostapd.log
154 # Disabled by default.
157 # Remove support for RADIUS accounting
158 #CONFIG_NO_ACCOUNTING=y
160 # Remove support for RADIUS
163 # Remove support for VLANs
166 # Enable support for fully dynamic VLANs. This enables hostapd to
167 # automatically create bridge and VLAN interfaces if necessary.
168 #CONFIG_FULL_DYNAMIC_VLAN=y
170 # Use netlink-based kernel API for VLAN operations instead of ioctl()
171 # Note: This requires libnl 3.1 or newer.
172 #CONFIG_VLAN_NETLINK=y
174 # Remove support for dumping state into a file on SIGUSR1 signal
175 # This can be used to reduce binary size at the cost of disabling a debugging
177 #CONFIG_NO_DUMP_STATE=y
179 # Enable tracing code for developer debugging
180 # This tracks use of memory allocations and other registrations and reports
181 # incorrect use with a backtrace of call (or allocation) location.
183 # For BSD, comment out these.
185 #LIBS_p += -lexecinfo
186 #LIBS_c += -lexecinfo
188 # Use libbfd to get more details for developer debugging
189 # This enables use of libbfd to get more detailed symbols for the backtraces
190 # generated by CONFIG_WPA_TRACE=y.
191 #CONFIG_WPA_TRACE_BFD=y
192 # For BSD, comment out these.
193 #LIBS += -lbfd -liberty -lz
194 #LIBS_p += -lbfd -liberty -lz
195 #LIBS_c += -lbfd -liberty -lz
197 # hostapd depends on strong random number generation being available from the
198 # operating system. os_get_random() function is used to fetch random data when
199 # needed, e.g., for key generation. On Linux and BSD systems, this works by
200 # reading /dev/urandom. It should be noted that the OS entropy pool needs to be
201 # properly initialized before hostapd is started. This is important especially
202 # on embedded devices that do not have a hardware random number generator and
203 # may by default start up with minimal entropy available for random number
206 # As a safety net, hostapd is by default trying to internally collect
207 # additional entropy for generating random data to mix in with the data
208 # fetched from the OS. This by itself is not considered to be very strong, but
209 # it may help in cases where the system pool is not initialized properly.
210 # However, it is very strongly recommended that the system pool is initialized
211 # with enough entropy either by using hardware assisted random number
212 # generator or by storing state over device reboots.
214 # hostapd can be configured to maintain its own entropy store over restarts to
215 # enhance random number generation. This is not perfect, but it is much more
216 # secure than using the same sequence of random numbers after every reboot.
217 # This can be enabled with -e<entropy file> command line option. The specified
218 # file needs to be readable and writable by hostapd.
220 # If the os_get_random() is known to provide strong random data (e.g., on
221 # Linux/BSD, the board in question is known to have reliable source of random
222 # data from /dev/urandom), the internal hostapd random pool can be disabled.
223 # This will save some in binary size and CPU use. However, this should only be
224 # considered for builds that are known to be used on devices that meet the
225 # requirements described above.
226 #CONFIG_NO_RANDOM_POOL=y
228 # Select TLS implementation
229 # openssl = OpenSSL (default)
231 # internal = Internal TLSv1 implementation (experimental)
232 # none = Empty template
235 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
236 # can be enabled to get a stronger construction of messages when block ciphers
240 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
241 # can be enabled to enable use of stronger crypto algorithms.
244 # If CONFIG_TLS=internal is used, additional library and include paths are
245 # needed for LibTomMath. Alternatively, an integrated, minimal version of
246 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
247 # and drawbacks of this option.
248 #CONFIG_INTERNAL_LIBTOMMATH=y
249 #ifndef CONFIG_INTERNAL_LIBTOMMATH
250 #LTM_PATH=/usr/src/libtommath-0.39
251 #CFLAGS += -I$(LTM_PATH)
252 #LIBS += -L$(LTM_PATH)
253 #LIBS_p += -L$(LTM_PATH)
255 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
256 # can be configured to include faster routines for exptmod, sqr, and div to
257 # speed up DH and RSA calculation considerably
258 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y
260 # Interworking (IEEE 802.11u)
261 # This can be used to enable functionality to improve interworking with
263 #CONFIG_INTERWORKING=y
268 # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file