2 * DFS - Dynamic Frequency Selection
3 * Copyright (c) 2002-2013, Jouni Malinen <j@w1.fi>
4 * Copyright (c) 2013-2017, Qualcomm Atheros, Inc.
6 * This software may be distributed under the terms of the BSD license.
7 * See README for more details.
10 #include "utils/includes.h"
12 #include "utils/common.h"
13 #include "common/ieee802_11_defs.h"
14 #include "common/hw_features_common.h"
15 #include "common/wpa_ctrl.h"
17 #include "ap_drv_ops.h"
18 #include "drivers/driver.h"
22 static int dfs_get_used_n_chans(struct hostapd_iface *iface, int *seg1)
28 if (iface->conf->ieee80211n && iface->conf->secondary_channel)
31 if (iface->conf->ieee80211ac || iface->conf->ieee80211ax) {
32 switch (hostapd_get_oper_chwidth(iface->conf)) {
33 case CHANWIDTH_USE_HT:
38 case CHANWIDTH_160MHZ:
41 case CHANWIDTH_80P80MHZ:
54 static int dfs_channel_available(struct hostapd_channel_data *chan,
58 * When radar detection happens, CSA is performed. However, there's no
59 * time for CAC, so radar channels must be skipped when finding a new
60 * channel for CSA, unless they are available for immediate use.
62 if (skip_radar && (chan->flag & HOSTAPD_CHAN_RADAR) &&
63 ((chan->flag & HOSTAPD_CHAN_DFS_MASK) !=
64 HOSTAPD_CHAN_DFS_AVAILABLE))
67 if (chan->flag & HOSTAPD_CHAN_DISABLED)
69 if ((chan->flag & HOSTAPD_CHAN_RADAR) &&
70 ((chan->flag & HOSTAPD_CHAN_DFS_MASK) ==
71 HOSTAPD_CHAN_DFS_UNAVAILABLE))
77 static int dfs_is_chan_allowed(struct hostapd_channel_data *chan, int n_chans)
80 * The tables contain first valid channel number based on channel width.
81 * We will also choose this first channel as the control one.
83 int allowed_40[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
86 * VHT80, valid channels based on center frequency:
87 * 42, 58, 106, 122, 138, 155
89 int allowed_80[] = { 36, 52, 100, 116, 132, 149 };
91 * VHT160 valid channels based on center frequency:
94 int allowed_160[] = { 36, 100 };
95 int *allowed = allowed_40;
96 unsigned int i, allowed_no = 0;
100 allowed = allowed_40;
101 allowed_no = ARRAY_SIZE(allowed_40);
104 allowed = allowed_80;
105 allowed_no = ARRAY_SIZE(allowed_80);
108 allowed = allowed_160;
109 allowed_no = ARRAY_SIZE(allowed_160);
112 wpa_printf(MSG_DEBUG, "Unknown width for %d channels", n_chans);
116 for (i = 0; i < allowed_no; i++) {
117 if (chan->chan == allowed[i])
125 static struct hostapd_channel_data *
126 dfs_get_chan_data(struct hostapd_hw_modes *mode, int freq, int first_chan_idx)
130 for (i = first_chan_idx; i < mode->num_channels; i++) {
131 if (mode->channels[i].freq == freq)
132 return &mode->channels[i];
139 static int dfs_chan_range_available(struct hostapd_hw_modes *mode,
140 int first_chan_idx, int num_chans,
143 struct hostapd_channel_data *first_chan, *chan;
145 u32 bw = num_chan_to_bw(num_chans);
147 if (first_chan_idx + num_chans > mode->num_channels)
150 first_chan = &mode->channels[first_chan_idx];
152 /* hostapd DFS implementation assumes the first channel as primary.
153 * If it's not allowed to use the first channel as primary, decline the
154 * whole channel range. */
155 if (!chan_pri_allowed(first_chan))
158 for (i = 0; i < num_chans; i++) {
159 chan = dfs_get_chan_data(mode, first_chan->freq + i * 20,
164 /* HT 40 MHz secondary channel availability checked only for
166 if (!chan_bw_allowed(chan, bw, 1, !i))
169 if (!dfs_channel_available(chan, skip_radar))
177 static int is_in_chanlist(struct hostapd_iface *iface,
178 struct hostapd_channel_data *chan)
180 if (!iface->conf->acs_ch_list.num)
183 return freq_range_list_includes(&iface->conf->acs_ch_list, chan->chan);
188 * The function assumes HT40+ operation.
189 * Make sure to adjust the following variables after calling this:
190 * - hapd->secondary_channel
191 * - hapd->vht/he_oper_centr_freq_seg0_idx
192 * - hapd->vht/he_oper_centr_freq_seg1_idx
194 static int dfs_find_channel(struct hostapd_iface *iface,
195 struct hostapd_channel_data **ret_chan,
196 int idx, int skip_radar)
198 struct hostapd_hw_modes *mode;
199 struct hostapd_channel_data *chan;
200 int i, channel_idx = 0, n_chans, n_chans1;
202 mode = iface->current_mode;
203 n_chans = dfs_get_used_n_chans(iface, &n_chans1);
205 wpa_printf(MSG_DEBUG, "DFS new chan checking %d channels", n_chans);
206 for (i = 0; i < mode->num_channels; i++) {
207 chan = &mode->channels[i];
209 /* Skip HT40/VHT incompatible channels */
210 if (iface->conf->ieee80211n &&
211 iface->conf->secondary_channel &&
212 (!dfs_is_chan_allowed(chan, n_chans) ||
213 !(chan->allowed_bw & HOSTAPD_CHAN_WIDTH_40P)))
216 /* Skip incompatible chandefs */
217 if (!dfs_chan_range_available(mode, i, n_chans, skip_radar))
220 if (!is_in_chanlist(iface, chan))
223 if (ret_chan && idx == channel_idx) {
224 wpa_printf(MSG_DEBUG, "Selected ch. #%d", chan->chan);
228 wpa_printf(MSG_DEBUG, "Adding channel: %d", chan->chan);
235 static void dfs_adjust_center_freq(struct hostapd_iface *iface,
236 struct hostapd_channel_data *chan,
237 int secondary_channel,
238 u8 *oper_centr_freq_seg0_idx,
239 u8 *oper_centr_freq_seg1_idx)
241 if (!iface->conf->ieee80211ac && !iface->conf->ieee80211ax)
247 *oper_centr_freq_seg1_idx = 0;
249 switch (hostapd_get_oper_chwidth(iface->conf)) {
250 case CHANWIDTH_USE_HT:
251 if (secondary_channel == 1)
252 *oper_centr_freq_seg0_idx = chan->chan + 2;
253 else if (secondary_channel == -1)
254 *oper_centr_freq_seg0_idx = chan->chan - 2;
256 *oper_centr_freq_seg0_idx = chan->chan;
258 case CHANWIDTH_80MHZ:
259 *oper_centr_freq_seg0_idx = chan->chan + 6;
261 case CHANWIDTH_160MHZ:
262 *oper_centr_freq_seg0_idx = chan->chan + 14;
265 wpa_printf(MSG_INFO, "DFS only VHT20/40/80/160 is supported now");
266 *oper_centr_freq_seg0_idx = 0;
270 wpa_printf(MSG_DEBUG, "DFS adjusting VHT center frequency: %d, %d",
271 *oper_centr_freq_seg0_idx,
272 *oper_centr_freq_seg1_idx);
276 /* Return start channel idx we will use for mode->channels[idx] */
277 static int dfs_get_start_chan_idx(struct hostapd_iface *iface, int *seg1_start)
279 struct hostapd_hw_modes *mode;
280 struct hostapd_channel_data *chan;
281 int channel_no = iface->conf->channel;
288 if (iface->conf->ieee80211n && iface->conf->secondary_channel == -1)
292 if (iface->conf->ieee80211ac || iface->conf->ieee80211ax) {
293 switch (hostapd_get_oper_chwidth(iface->conf)) {
294 case CHANWIDTH_USE_HT:
296 case CHANWIDTH_80MHZ:
297 channel_no = hostapd_get_oper_centr_freq_seg0_idx(
300 case CHANWIDTH_160MHZ:
301 channel_no = hostapd_get_oper_centr_freq_seg0_idx(
304 case CHANWIDTH_80P80MHZ:
305 channel_no = hostapd_get_oper_centr_freq_seg0_idx(
307 chan_seg1 = hostapd_get_oper_centr_freq_seg1_idx(
312 "DFS only VHT20/40/80/160/80+80 is supported now");
319 mode = iface->current_mode;
320 for (i = 0; i < mode->num_channels; i++) {
321 chan = &mode->channels[i];
322 if (chan->chan == channel_no) {
328 if (res != -1 && chan_seg1 > -1) {
331 /* Get idx for seg1 */
332 mode = iface->current_mode;
333 for (i = 0; i < mode->num_channels; i++) {
334 chan = &mode->channels[i];
335 if (chan->chan == chan_seg1) {
346 wpa_printf(MSG_DEBUG,
347 "DFS chan_idx seems wrong; num-ch: %d ch-no: %d conf-ch-no: %d 11n: %d sec-ch: %d vht-oper-width: %d",
348 mode->num_channels, channel_no, iface->conf->channel,
349 iface->conf->ieee80211n,
350 iface->conf->secondary_channel,
351 hostapd_get_oper_chwidth(iface->conf));
353 for (i = 0; i < mode->num_channels; i++) {
354 wpa_printf(MSG_DEBUG, "Available channel: %d",
355 mode->channels[i].chan);
363 /* At least one channel have radar flag */
364 static int dfs_check_chans_radar(struct hostapd_iface *iface,
365 int start_chan_idx, int n_chans)
367 struct hostapd_channel_data *channel;
368 struct hostapd_hw_modes *mode;
371 mode = iface->current_mode;
373 for (i = 0; i < n_chans; i++) {
374 channel = &mode->channels[start_chan_idx + i];
375 if (channel->flag & HOSTAPD_CHAN_RADAR)
383 /* All channels available */
384 static int dfs_check_chans_available(struct hostapd_iface *iface,
385 int start_chan_idx, int n_chans)
387 struct hostapd_channel_data *channel;
388 struct hostapd_hw_modes *mode;
391 mode = iface->current_mode;
393 for (i = 0; i < n_chans; i++) {
394 channel = &mode->channels[start_chan_idx + i];
396 if (channel->flag & HOSTAPD_CHAN_DISABLED)
399 if (!(channel->flag & HOSTAPD_CHAN_RADAR))
402 if ((channel->flag & HOSTAPD_CHAN_DFS_MASK) !=
403 HOSTAPD_CHAN_DFS_AVAILABLE)
411 /* At least one channel unavailable */
412 static int dfs_check_chans_unavailable(struct hostapd_iface *iface,
416 struct hostapd_channel_data *channel;
417 struct hostapd_hw_modes *mode;
420 mode = iface->current_mode;
422 for (i = 0; i < n_chans; i++) {
423 channel = &mode->channels[start_chan_idx + i];
424 if (channel->flag & HOSTAPD_CHAN_DISABLED)
426 if ((channel->flag & HOSTAPD_CHAN_DFS_MASK) ==
427 HOSTAPD_CHAN_DFS_UNAVAILABLE)
435 static struct hostapd_channel_data *
436 dfs_get_valid_channel(struct hostapd_iface *iface,
437 int *secondary_channel,
438 u8 *oper_centr_freq_seg0_idx,
439 u8 *oper_centr_freq_seg1_idx,
442 struct hostapd_hw_modes *mode;
443 struct hostapd_channel_data *chan = NULL;
444 int num_available_chandefs;
448 wpa_printf(MSG_DEBUG, "DFS: Selecting random channel");
449 *secondary_channel = 0;
450 *oper_centr_freq_seg0_idx = 0;
451 *oper_centr_freq_seg1_idx = 0;
453 if (iface->current_mode == NULL)
456 mode = iface->current_mode;
457 if (mode->mode != HOSTAPD_MODE_IEEE80211A)
460 /* Get the count first */
461 num_available_chandefs = dfs_find_channel(iface, NULL, 0, skip_radar);
462 if (num_available_chandefs == 0)
465 if (os_get_random((u8 *) &_rand, sizeof(_rand)) < 0)
467 chan_idx = _rand % num_available_chandefs;
468 dfs_find_channel(iface, &chan, chan_idx, skip_radar);
470 /* dfs_find_channel() calculations assume HT40+ */
471 if (iface->conf->secondary_channel)
472 *secondary_channel = 1;
474 *secondary_channel = 0;
476 dfs_adjust_center_freq(iface, chan,
478 oper_centr_freq_seg0_idx,
479 oper_centr_freq_seg1_idx);
485 static int set_dfs_state_freq(struct hostapd_iface *iface, int freq, u32 state)
487 struct hostapd_hw_modes *mode;
488 struct hostapd_channel_data *chan = NULL;
491 mode = iface->current_mode;
495 wpa_printf(MSG_DEBUG, "set_dfs_state 0x%X for %d MHz", state, freq);
496 for (i = 0; i < iface->current_mode->num_channels; i++) {
497 chan = &iface->current_mode->channels[i];
498 if (chan->freq == freq) {
499 if (chan->flag & HOSTAPD_CHAN_RADAR) {
500 chan->flag &= ~HOSTAPD_CHAN_DFS_MASK;
502 return 1; /* Channel found */
506 wpa_printf(MSG_WARNING, "Can't set DFS state for freq %d MHz", freq);
511 static int set_dfs_state(struct hostapd_iface *iface, int freq, int ht_enabled,
512 int chan_offset, int chan_width, int cf1,
516 struct hostapd_hw_modes *mode;
517 int frequency = freq;
520 mode = iface->current_mode;
524 if (mode->mode != HOSTAPD_MODE_IEEE80211A) {
525 wpa_printf(MSG_WARNING, "current_mode != IEEE80211A");
529 /* Seems cf1 and chan_width is enough here */
530 switch (chan_width) {
531 case CHAN_WIDTH_20_NOHT:
539 frequency = cf1 - 10;
543 frequency = cf1 - 30;
547 frequency = cf1 - 70;
550 wpa_printf(MSG_INFO, "DFS chan_width %d not supported",
555 wpa_printf(MSG_DEBUG, "DFS freq: %dMHz, n_chans: %d", frequency,
557 for (i = 0; i < n_chans; i++) {
558 ret += set_dfs_state_freq(iface, frequency, state);
559 frequency = frequency + 20;
566 static int dfs_are_channels_overlapped(struct hostapd_iface *iface, int freq,
567 int chan_width, int cf1, int cf2)
569 int start_chan_idx, start_chan_idx1;
570 struct hostapd_hw_modes *mode;
571 struct hostapd_channel_data *chan;
572 int n_chans, n_chans1, i, j, frequency = freq, radar_n_chans = 1;
576 /* Our configuration */
577 mode = iface->current_mode;
578 start_chan_idx = dfs_get_start_chan_idx(iface, &start_chan_idx1);
579 n_chans = dfs_get_used_n_chans(iface, &n_chans1);
581 /* Check we are on DFS channel(s) */
582 if (!dfs_check_chans_radar(iface, start_chan_idx, n_chans))
585 /* Reported via radar event */
586 switch (chan_width) {
587 case CHAN_WIDTH_20_NOHT:
595 frequency = cf1 - 10;
599 frequency = cf1 - 30;
603 frequency = cf1 - 70;
606 wpa_printf(MSG_INFO, "DFS chan_width %d not supported",
611 ieee80211_freq_to_chan(frequency, &radar_chan);
613 for (i = 0; i < n_chans; i++) {
614 chan = &mode->channels[start_chan_idx + i];
615 if (!(chan->flag & HOSTAPD_CHAN_RADAR))
617 for (j = 0; j < radar_n_chans; j++) {
618 wpa_printf(MSG_DEBUG, "checking our: %d, radar: %d",
619 chan->chan, radar_chan + j * 4);
620 if (chan->chan == radar_chan + j * 4)
625 wpa_printf(MSG_DEBUG, "overlapped: %d", res);
631 static unsigned int dfs_get_cac_time(struct hostapd_iface *iface,
632 int start_chan_idx, int n_chans)
634 struct hostapd_channel_data *channel;
635 struct hostapd_hw_modes *mode;
637 unsigned int cac_time_ms = 0;
639 mode = iface->current_mode;
641 for (i = 0; i < n_chans; i++) {
642 channel = &mode->channels[start_chan_idx + i];
643 if (!(channel->flag & HOSTAPD_CHAN_RADAR))
645 if (channel->dfs_cac_ms > cac_time_ms)
646 cac_time_ms = channel->dfs_cac_ms;
655 * 1 - continue channel/ap setup
656 * 0 - channel/ap setup will be continued after CAC
657 * -1 - hit critical error
659 int hostapd_handle_dfs(struct hostapd_iface *iface)
661 struct hostapd_channel_data *channel;
662 int res, n_chans, n_chans1, start_chan_idx, start_chan_idx1;
665 if (!iface->current_mode) {
667 * This can happen with drivers that do not provide mode
668 * information and as such, cannot really use hostapd for DFS.
670 wpa_printf(MSG_DEBUG,
671 "DFS: No current_mode information - assume no need to perform DFS operations by hostapd");
675 iface->cac_started = 0;
678 /* Get start (first) channel for current configuration */
679 start_chan_idx = dfs_get_start_chan_idx(iface,
681 if (start_chan_idx == -1)
684 /* Get number of used channels, depend on width */
685 n_chans = dfs_get_used_n_chans(iface, &n_chans1);
688 iface->dfs_cac_ms = dfs_get_cac_time(iface, start_chan_idx,
691 /* Check if any of configured channels require DFS */
692 res = dfs_check_chans_radar(iface, start_chan_idx, n_chans);
693 wpa_printf(MSG_DEBUG,
694 "DFS %d channels required radar detection",
699 /* Check if all channels are DFS available */
700 res = dfs_check_chans_available(iface, start_chan_idx, n_chans);
701 wpa_printf(MSG_DEBUG,
702 "DFS all channels available, (SKIP CAC): %s",
707 /* Check if any of configured channels is unavailable */
708 res = dfs_check_chans_unavailable(iface, start_chan_idx,
710 wpa_printf(MSG_DEBUG, "DFS %d chans unavailable - choose other channel: %s",
711 res, res ? "yes": "no");
716 channel = dfs_get_valid_channel(iface, &sec, &cf1, &cf2,
719 wpa_printf(MSG_ERROR, "could not get valid channel");
720 hostapd_set_state(iface, HAPD_IFACE_DFS);
724 iface->freq = channel->freq;
725 iface->conf->channel = channel->chan;
726 iface->conf->secondary_channel = sec;
727 hostapd_set_oper_centr_freq_seg0_idx(iface->conf, cf1);
728 hostapd_set_oper_centr_freq_seg1_idx(iface->conf, cf2);
732 /* Finally start CAC */
733 hostapd_set_state(iface, HAPD_IFACE_DFS);
734 wpa_printf(MSG_DEBUG, "DFS start CAC on %d MHz", iface->freq);
735 wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_START
736 "freq=%d chan=%d sec_chan=%d, width=%d, seg0=%d, seg1=%d, cac_time=%ds",
738 iface->conf->channel, iface->conf->secondary_channel,
739 hostapd_get_oper_chwidth(iface->conf),
740 hostapd_get_oper_centr_freq_seg0_idx(iface->conf),
741 hostapd_get_oper_centr_freq_seg1_idx(iface->conf),
742 iface->dfs_cac_ms / 1000);
744 res = hostapd_start_dfs_cac(
745 iface, iface->conf->hw_mode, iface->freq, iface->conf->channel,
746 iface->conf->ieee80211n, iface->conf->ieee80211ac,
747 iface->conf->ieee80211ax,
748 iface->conf->secondary_channel,
749 hostapd_get_oper_chwidth(iface->conf),
750 hostapd_get_oper_centr_freq_seg0_idx(iface->conf),
751 hostapd_get_oper_centr_freq_seg1_idx(iface->conf));
754 wpa_printf(MSG_ERROR, "DFS start_dfs_cac() failed, %d", res);
762 static int hostapd_config_dfs_chan_available(struct hostapd_iface *iface)
764 int n_chans, n_chans1, start_chan_idx, start_chan_idx1;
766 /* Get the start (first) channel for current configuration */
767 start_chan_idx = dfs_get_start_chan_idx(iface, &start_chan_idx1);
768 if (start_chan_idx < 0)
771 /* Get the number of used channels, depending on width */
772 n_chans = dfs_get_used_n_chans(iface, &n_chans1);
774 /* Check if all channels are DFS available */
775 return dfs_check_chans_available(iface, start_chan_idx, n_chans);
779 int hostapd_dfs_complete_cac(struct hostapd_iface *iface, int success, int freq,
780 int ht_enabled, int chan_offset, int chan_width,
783 wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_COMPLETED
784 "success=%d freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
785 success, freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
788 /* Complete iface/ap configuration */
789 if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD) {
790 /* Complete AP configuration for the first bring up. */
791 if (iface->state != HAPD_IFACE_ENABLED)
792 hostapd_setup_interface_complete(iface, 0);
794 iface->cac_started = 0;
796 set_dfs_state(iface, freq, ht_enabled, chan_offset,
797 chan_width, cf1, cf2,
798 HOSTAPD_CHAN_DFS_AVAILABLE);
800 * Just mark the channel available when CAC completion
801 * event is received in enabled state. CAC result could
802 * have been propagated from another radio having the
803 * same regulatory configuration. When CAC completion is
804 * received during non-HAPD_IFACE_ENABLED state, make
805 * sure the configured channel is available because this
806 * CAC completion event could have been propagated from
809 if (iface->state != HAPD_IFACE_ENABLED &&
810 hostapd_config_dfs_chan_available(iface)) {
811 hostapd_setup_interface_complete(iface, 0);
812 iface->cac_started = 0;
821 int hostapd_dfs_pre_cac_expired(struct hostapd_iface *iface, int freq,
822 int ht_enabled, int chan_offset, int chan_width,
825 wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_PRE_CAC_EXPIRED
826 "freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
827 freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
829 /* Proceed only if DFS is not offloaded to the driver */
830 if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
833 set_dfs_state(iface, freq, ht_enabled, chan_offset, chan_width,
834 cf1, cf2, HOSTAPD_CHAN_DFS_USABLE);
840 static int hostapd_dfs_start_channel_switch_cac(struct hostapd_iface *iface)
842 struct hostapd_channel_data *channel;
843 int secondary_channel;
844 u8 oper_centr_freq_seg0_idx = 0;
845 u8 oper_centr_freq_seg1_idx = 0;
849 /* Radar detected during active CAC */
850 iface->cac_started = 0;
851 channel = dfs_get_valid_channel(iface, &secondary_channel,
852 &oper_centr_freq_seg0_idx,
853 &oper_centr_freq_seg1_idx,
857 wpa_printf(MSG_ERROR, "No valid channel available");
861 wpa_printf(MSG_DEBUG, "DFS will switch to a new channel %d",
863 wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NEW_CHANNEL
864 "freq=%d chan=%d sec_chan=%d", channel->freq,
865 channel->chan, secondary_channel);
867 iface->freq = channel->freq;
868 iface->conf->channel = channel->chan;
869 iface->conf->secondary_channel = secondary_channel;
870 hostapd_set_oper_centr_freq_seg0_idx(iface->conf,
871 oper_centr_freq_seg0_idx);
872 hostapd_set_oper_centr_freq_seg1_idx(iface->conf,
873 oper_centr_freq_seg1_idx);
876 hostapd_setup_interface_complete(iface, err);
881 static int hostapd_dfs_start_channel_switch(struct hostapd_iface *iface)
883 struct hostapd_channel_data *channel;
884 int secondary_channel;
885 u8 oper_centr_freq_seg0_idx;
886 u8 oper_centr_freq_seg1_idx;
888 struct csa_settings csa_settings;
891 struct hostapd_hw_modes *cmode = iface->current_mode;
893 wpa_printf(MSG_DEBUG, "%s called (CAC active: %s, CSA active: %s)",
894 __func__, iface->cac_started ? "yes" : "no",
895 hostapd_csa_in_progress(iface) ? "yes" : "no");
897 /* Check if CSA in progress */
898 if (hostapd_csa_in_progress(iface))
901 /* Check if active CAC */
902 if (iface->cac_started)
903 return hostapd_dfs_start_channel_switch_cac(iface);
906 * Allow selection of DFS channel in ETSI to comply with
909 if (iface->dfs_domain == HOSTAPD_DFS_REGION_ETSI)
912 /* Perform channel switch/CSA */
913 channel = dfs_get_valid_channel(iface, &secondary_channel,
914 &oper_centr_freq_seg0_idx,
915 &oper_centr_freq_seg1_idx,
920 * If there is no channel to switch immediately to, check if
921 * there is another channel where we can switch even if it
922 * requires to perform a CAC first.
925 channel = dfs_get_valid_channel(iface, &secondary_channel,
926 &oper_centr_freq_seg0_idx,
927 &oper_centr_freq_seg1_idx,
931 "%s: no DFS channels left, waiting for NOP to finish",
936 iface->freq = channel->freq;
937 iface->conf->channel = channel->chan;
938 iface->conf->secondary_channel = secondary_channel;
939 hostapd_set_oper_centr_freq_seg0_idx(iface->conf,
940 oper_centr_freq_seg0_idx);
941 hostapd_set_oper_centr_freq_seg1_idx(iface->conf,
942 oper_centr_freq_seg1_idx);
944 hostapd_disable_iface(iface);
945 hostapd_enable_iface(iface);
949 wpa_printf(MSG_DEBUG, "DFS will switch to a new channel %d",
951 wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NEW_CHANNEL
952 "freq=%d chan=%d sec_chan=%d", channel->freq,
953 channel->chan, secondary_channel);
955 /* Setup CSA request */
956 os_memset(&csa_settings, 0, sizeof(csa_settings));
957 csa_settings.cs_count = 5;
958 csa_settings.block_tx = 1;
959 err = hostapd_set_freq_params(&csa_settings.freq_params,
960 iface->conf->hw_mode,
963 iface->conf->ieee80211n,
964 iface->conf->ieee80211ac,
965 iface->conf->ieee80211ax,
967 hostapd_get_oper_chwidth(iface->conf),
968 oper_centr_freq_seg0_idx,
969 oper_centr_freq_seg1_idx,
971 &cmode->he_capab[IEEE80211_MODE_AP]);
974 wpa_printf(MSG_ERROR, "DFS failed to calculate CSA freq params");
975 hostapd_disable_iface(iface);
979 for (i = 0; i < iface->num_bss; i++) {
980 err = hostapd_switch_channel(iface->bss[i], &csa_settings);
986 wpa_printf(MSG_WARNING, "DFS failed to schedule CSA (%d) - trying fallback",
988 iface->freq = channel->freq;
989 iface->conf->channel = channel->chan;
990 iface->conf->secondary_channel = secondary_channel;
991 hostapd_set_oper_centr_freq_seg0_idx(iface->conf,
992 oper_centr_freq_seg0_idx);
993 hostapd_set_oper_centr_freq_seg1_idx(iface->conf,
994 oper_centr_freq_seg1_idx);
996 hostapd_disable_iface(iface);
997 hostapd_enable_iface(iface);
1001 /* Channel configuration will be updated once CSA completes and
1002 * ch_switch_notify event is received */
1004 wpa_printf(MSG_DEBUG, "DFS waiting channel switch event");
1009 int hostapd_dfs_radar_detected(struct hostapd_iface *iface, int freq,
1010 int ht_enabled, int chan_offset, int chan_width,
1015 wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_RADAR_DETECTED
1016 "freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
1017 freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
1019 /* Proceed only if DFS is not offloaded to the driver */
1020 if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
1023 if (!iface->conf->ieee80211h)
1026 /* mark radar frequency as invalid */
1027 set_dfs_state(iface, freq, ht_enabled, chan_offset, chan_width,
1028 cf1, cf2, HOSTAPD_CHAN_DFS_UNAVAILABLE);
1030 /* Skip if reported radar event not overlapped our channels */
1031 res = dfs_are_channels_overlapped(iface, freq, chan_width, cf1, cf2);
1035 /* radar detected while operating, switch the channel. */
1036 res = hostapd_dfs_start_channel_switch(iface);
1042 int hostapd_dfs_nop_finished(struct hostapd_iface *iface, int freq,
1043 int ht_enabled, int chan_offset, int chan_width,
1046 wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NOP_FINISHED
1047 "freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
1048 freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
1050 /* Proceed only if DFS is not offloaded to the driver */
1051 if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
1054 /* TODO add correct implementation here */
1055 set_dfs_state(iface, freq, ht_enabled, chan_offset, chan_width,
1056 cf1, cf2, HOSTAPD_CHAN_DFS_USABLE);
1058 /* Handle cases where all channels were initially unavailable */
1059 if (iface->state == HAPD_IFACE_DFS && !iface->cac_started)
1060 hostapd_handle_dfs(iface);
1066 int hostapd_is_dfs_required(struct hostapd_iface *iface)
1068 int n_chans, n_chans1, start_chan_idx, start_chan_idx1, res;
1070 if (!iface->conf->ieee80211h || !iface->current_mode ||
1071 iface->current_mode->mode != HOSTAPD_MODE_IEEE80211A)
1074 /* Get start (first) channel for current configuration */
1075 start_chan_idx = dfs_get_start_chan_idx(iface, &start_chan_idx1);
1076 if (start_chan_idx == -1)
1079 /* Get number of used channels, depend on width */
1080 n_chans = dfs_get_used_n_chans(iface, &n_chans1);
1082 /* Check if any of configured channels require DFS */
1083 res = dfs_check_chans_radar(iface, start_chan_idx, n_chans);
1086 if (start_chan_idx1 >= 0 && n_chans1 > 0)
1087 res = dfs_check_chans_radar(iface, start_chan_idx1, n_chans1);
1092 int hostapd_dfs_start_cac(struct hostapd_iface *iface, int freq,
1093 int ht_enabled, int chan_offset, int chan_width,
1096 wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_START
1097 "freq=%d chan=%d chan_offset=%d width=%d seg0=%d "
1098 "seg1=%d cac_time=%ds",
1099 freq, (freq - 5000) / 5, chan_offset, chan_width, cf1, cf2, 60);
1100 iface->cac_started = 1;
1106 * Main DFS handler for offloaded case.
1107 * 2 - continue channel/AP setup for non-DFS channel
1108 * 1 - continue channel/AP setup for DFS channel
1109 * 0 - channel/AP setup will be continued after CAC
1110 * -1 - hit critical error
1112 int hostapd_handle_dfs_offload(struct hostapd_iface *iface)
1114 wpa_printf(MSG_DEBUG, "%s: iface->cac_started: %d",
1115 __func__, iface->cac_started);
1118 * If DFS has already been started, then we are being called from a
1119 * callback to continue AP/channel setup. Reset the CAC start flag and
1122 if (iface->cac_started) {
1123 wpa_printf(MSG_DEBUG, "%s: iface->cac_started: %d",
1124 __func__, iface->cac_started);
1125 iface->cac_started = 0;
1129 if (ieee80211_is_dfs(iface->freq, iface->hw_features,
1130 iface->num_hw_features)) {
1131 wpa_printf(MSG_DEBUG, "%s: freq %d MHz requires DFS",
1132 __func__, iface->freq);
1136 wpa_printf(MSG_DEBUG,
1137 "%s: freq %d MHz does not require DFS. Continue channel/AP setup",
1138 __func__, iface->freq);