2 - hostap: try other roaming modes
3 NOTE: current mode (manual roaming) does not really roam at all..
4 Firmware did not notice the current AP disappearing..
5 - add support for WPA with ap_scan=0 (update selected cipher etc. based on
6 AssocInfo; make sure these match with configuration)
7 - optional security separation (build time option): run EAPOL state machines
8 as non-root (need to add something like socketpair between privileged root
9 process and non-root handler; send EAPOL packets between processes
10 and send keying data from non-root -> privileged)
11 EAPOL-Key processing (WPA & WEP keys) could be in privileged part
12 at least in the beginning; some parts might end up being moved to
13 non-root part eventually
14 - consider closing smart card / PCSC connection when EAP-SIM/EAP-AKA
15 authentication has been completed (cache scard data based on serial#(?)
16 and try to optimize next connection if the same card is present for next
18 - EAP-AKA: AT_CHECKCODE
19 - EAP-SIM/AKA: AT_RESULT_IND
20 - on disconnect event, could try to associate with another AP if one is
21 present in scan results; would need to update scan results periodically..
22 - if driver/hw is not WPA2 capable, must remove WPA_PROTO_RSN flag from
23 ssid->proto fields to avoid detecting downgrade attacks when the driver
24 is not reporting RSN IE, but msg 3/4 has one
25 - Cisco AP and non-zero keyidx for unicast -> map to broadcast
26 (actually, this already works with driver_ndis; so maybe just change
27 driver_*.c to do the mapping for drivers that cannot handle non-zero keyidx
28 for unicast); worked also with Host AP driver and madwifi
29 - IEEE 802.1X and key update with driver_ndis?? wpa_supplicant did not seem
30 to see unencrypted EAPOL-Key frames at all..
31 - EAP-PAX with PAX_SEC
33 * OTP Extended Responses (Sect. 5.5)
34 - test what happens if authenticator sends EAP-Success before real EAP
35 authentication ("canned" Success); this should be ignored based on
37 - test compilation with gcc -W options (more warnings?)
38 (Done once; number of unused function arguments still present)
39 - add proper support for using dot11RSNAConfigSATimeout
40 - ctrl_iface: get/set/remove blob
41 - use doc/docbook/*.sgml and docbook2{txt,html,pdf} to replace README and
42 web pages including the same information.. i.e., have this information only
43 in one page; how to build a PDF file with all the SGML included?
44 - test wait-for-interface and daemonize combinations with number of driver
46 * 'test' worked with WPA-PSK
47 - EAP-POTP/RSA SecurID profile (draft-nystrom-eap-potp-03.txt)
48 - document wpa_gui build and consider adding it to 'make install'
49 - test madwifi with pairwise=TKIP group=WEP104
50 - possibility to link in WPA Authenticator state machine to wpa_supplicant
51 (new STAKey handshake, WPA2 IBSS)
52 - consider merging hostapd and wpa_supplicant PMKSA cache implementations
53 - add support for configuring password for MSCHAPv2 as NtPasswordHash in
54 the same way as was added to hostapd (hash:<hex value>)
55 - test_driver: configure directory and create AP-<mac> and STA-<mac> files
56 there to allow scanning multiple APs (e.g., for testing pre-auth and PMKSA
57 caching testing) and to exchange STA-STA EAPOL frames
58 - consider adding generic buffer functionality that could be used in number
60 * allocate buffer (with default max size), allow reserving head room to
61 make it possible to add a header without having to reallocate buffer
62 * reallocate buffer (add head and/or tail room)
63 * ref count and free when count=0 ?
64 * add data (to tail): re-alloc more tailroom if needed and copy new data
65 * error flag so that caller can do multiple add()s and only in the end
66 check whether something has failed; this should make error handling
68 - consider redesigning pending EAP requests (identity/password/otp from
69 ctrl_iface) by moving the retrying of the previous request into EAP
70 state machine so that EAPOL state machine is not needed for this
71 - rfc4284.txt (network selection for eap)
72 - www pages about configuring wpa_supplicant:
73 * global options (ap_scan, ctrl_interfaces) based on OS/driver
77 * EAP options (one page for each method)
78 * "configuration wizard" (step 1: select OS, step 2: select driver, ...) to
79 generate example configuration
80 - error path in rsn_preauth_init: should probably deinit l2_packet handlers
81 if something fails; does something else need deinit?
82 - consider moving SIM card functionality (IMSI fetching) away from eap.c;
83 this should likely happen before EAP is initialized for authentication;
84 now IMSI is read only after receiving EAP-Identity/Request, but since it is
85 really needed for all cases, reading IMSI and generating Identity string
86 could very well be done before EAP has been started
87 - test all allowed EAP Phase 2 methods (i.e., anything else than PEAP, TTLS,
88 FAST): SIM AKA PAX PSK LEAP; if these work, include in eap_testing.txt; if
89 not, either fix or make eap_allowed_phase2_type reject
90 - try to work around race in receiving association event and first EAPOL
92 - helper function to do memcmp(addr, "\x00\x00\x00\x00\x00\x00", ETH_ALEN)
93 - add wpa_secure_memzero() macro and secure implementation (volatile u8*) to
94 clear memory; this would be used to clear temporary buffers containing
95 private data (e.g., keys); the macro can be defined to NOP in order to save
96 space (i.e., no code should depend on the macro doing something)
97 - make sure that TLS session cache is not shared between EAP types or if it
98 is, that the cache entries are bound to only one EAP type; e.g., cache entry
99 created with EAP-TLS must not be allowed to do fast re-auth with EAP-TTLS
100 - consider moving eap_tls_build_ack() call into eap_tls_process_helper()
101 (it seems to be called always if helper returns 1)
102 * could need to modify eap_{ttls,peap,fast}_decrypt to do same
103 - add support for fetching full user cert chain from Windows certificate
104 stores even when there are intermediate CA certs that are not in the
105 configured ca_cert store (e.g., ROOT) (they could be, e.g., in CA store)
109 - clean up common.[ch]
110 - change TLS/crypto library interface to use a structure of function
111 pointers and helper inline functions (like driver_ops) instead of
112 requiring every TLS wrapper to implement all functions
113 - move from CVS to git (0.3.x, 0.4.x, 0.5.x releases will continue
114 to be updated only on CVS)
115 - move files into subdirectories and combine wpa_supplicant and hostapd
116 into a repository that matches in directory structure with the release
118 (subdirs: eap_common, eap_peer, eap_server, driver, driver_ap, ...)
119 - make it clearer that EAP server/peer can be used as a separate library
121 - add support for encrypted configuration fields (e.g., password, psk,
123 - wpa_gui: add support for setting and showing priority, id_str, auth_alg
124 (open/shared for static WEP)