Merge bmake-20211212

[FreeBSD/FreeBSD.git] / crypto / openssh / PROTOCOL

This documents OpenSSH's deviations and extensions to the published SSH
protocol.

Note that OpenSSH's sftp and sftp-server implement revision 3 of the SSH
filexfer protocol described in:

https://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt

Newer versions of the draft will not be supported, though some features
are individually implemented as extensions described below.

The protocol used by OpenSSH's ssh-agent is described in the file
PROTOCOL.agent

1. Transport protocol changes

1.1. transport: Protocol 2 MAC algorithm "umac-64@openssh.com"

This is a new transport-layer MAC method using the UMAC algorithm
(rfc4418). This method is identical to the "umac-64" method documented
in:

https://www.openssh.com/txt/draft-miller-secsh-umac-01.txt

1.2. transport: Protocol 2 compression algorithm "zlib@openssh.com"

This transport-layer compression method uses the zlib compression
algorithm (identical to the "zlib" method in rfc4253), but delays the
start of compression until after authentication has completed. This
avoids exposing compression code to attacks from unauthenticated users.

The method is documented in:

https://www.openssh.com/txt/draft-miller-secsh-compression-delayed-00.txt

1.3. transport: New public key algorithms "ssh-rsa-cert-v01@openssh.com",
     "ssh-dsa-cert-v01@openssh.com",
     "ecdsa-sha2-nistp256-cert-v01@openssh.com",
     "ecdsa-sha2-nistp384-cert-v01@openssh.com" and
     "ecdsa-sha2-nistp521-cert-v01@openssh.com"

OpenSSH introduces new public key algorithms to support certificate
authentication for users and host keys. These methods are documented
in the file PROTOCOL.certkeys

1.4. transport: Elliptic Curve cryptography

OpenSSH supports ECC key exchange and public key authentication as
specified in RFC5656. Only the ecdsa-sha2-nistp256, ecdsa-sha2-nistp384
and ecdsa-sha2-nistp521 curves over GF(p) are supported. Elliptic
curve points encoded using point compression are NOT accepted or
generated.

1.5 transport: Protocol 2 Encrypt-then-MAC MAC algorithms

OpenSSH supports MAC algorithms, whose names contain "-etm", that
perform the calculations in a different order to that defined in RFC
4253. These variants use the so-called "encrypt then MAC" ordering,
calculating the MAC over the packet ciphertext rather than the
plaintext. This ordering closes a security flaw in the SSH transport
protocol, where decryption of unauthenticated ciphertext provided a
"decryption oracle" that could, in conjunction with cipher flaws, reveal
session plaintext.

Specifically, the "-etm" MAC algorithms modify the transport protocol
to calculate the MAC over the packet ciphertext and to send the packet
length unencrypted. This is necessary for the transport to obtain the
length of the packet and location of the MAC tag so that it may be
verified without decrypting unauthenticated data.

As such, the MAC covers:

      mac = MAC(key, sequence_number || packet_length || encrypted_packet)

where "packet_length" is encoded as a uint32 and "encrypted_packet"
contains:

      byte      padding_length
      byte[n1]  payload; n1 = packet_length - padding_length - 1
      byte[n2]  random padding; n2 = padding_length

1.6 transport: AES-GCM

OpenSSH supports the AES-GCM algorithm as specified in RFC 5647.
Because of problems with the specification of the key exchange
the behaviour of OpenSSH differs from the RFC as follows:

AES-GCM is only negotiated as the cipher algorithms
"aes128-gcm@openssh.com" or "aes256-gcm@openssh.com" and never as
an MAC algorithm. Additionally, if AES-GCM is selected as the cipher
the exchanged MAC algorithms are ignored and there doesn't have to be
a matching MAC.

1.7 transport: chacha20-poly1305@openssh.com authenticated encryption

OpenSSH supports authenticated encryption using ChaCha20 and Poly1305
as described in PROTOCOL.chacha20poly1305.

1.8 transport: curve25519-sha256@libssh.org key exchange algorithm

OpenSSH supports the use of ECDH in Curve25519 for key exchange as
described at:
http://git.libssh.org/users/aris/libssh.git/plain/doc/curve25519-sha256@libssh.org.txt?h=curve25519

2. Connection protocol changes

2.1. connection: Channel write close extension "eow@openssh.com"

The SSH connection protocol (rfc4254) provides the SSH_MSG_CHANNEL_EOF
message to allow an endpoint to signal its peer that it will send no
more data over a channel. Unfortunately, there is no symmetric way for
an endpoint to request that its peer should cease sending data to it
while still keeping the channel open for the endpoint to send data to
the peer.

This is desirable, since it saves the transmission of data that would
otherwise need to be discarded and it allows an endpoint to signal local
processes of the condition, e.g. by closing the corresponding file
descriptor.

OpenSSH implements a channel extension message to perform this
signalling: "eow@openssh.com" (End Of Write). This message is sent by
an endpoint when the local output of a session channel is closed or
experiences a write error. The message is formatted as follows:

        byte            SSH_MSG_CHANNEL_REQUEST
        uint32          recipient channel
        string          "eow@openssh.com"
        boolean         FALSE

On receiving this message, the peer SHOULD cease sending data of
the channel and MAY signal the process from which the channel data
originates (e.g. by closing its read file descriptor).

As with the symmetric SSH_MSG_CHANNEL_EOF message, the channel does
remain open after a "eow@openssh.com" has been sent and more data may
still be sent in the other direction. This message does not consume
window space and may be sent even if no window space is available.

NB. due to certain broken SSH implementations aborting upon receipt
of this message (in contravention of RFC4254 section 5.4), this
message is only sent to OpenSSH peers (identified by banner).
Other SSH implementations may be listed to receive this message
upon request.

2.2. connection: disallow additional sessions extension
     "no-more-sessions@openssh.com"

Most SSH connections will only ever request a single session, but a
attacker may abuse a running ssh client to surreptitiously open
additional sessions under their control. OpenSSH provides a global
request "no-more-sessions@openssh.com" to mitigate this attack.

When an OpenSSH client expects that it will never open another session
(i.e. it has been started with connection multiplexing disabled), it
will send the following global request:

        byte            SSH_MSG_GLOBAL_REQUEST
        string          "no-more-sessions@openssh.com"
        char            want-reply

On receipt of such a message, an OpenSSH server will refuse to open
future channels of type "session" and instead immediately abort the
connection.

Note that this is not a general defence against compromised clients
(that is impossible), but it thwarts a simple attack.

NB. due to certain broken SSH implementations aborting upon receipt
of this message, the no-more-sessions request is only sent to OpenSSH
servers (identified by banner). Other SSH implementations may be
listed to receive this message upon request.

2.3. connection: Tunnel forward extension "tun@openssh.com"

OpenSSH supports layer 2 and layer 3 tunnelling via the "tun@openssh.com"
channel type. This channel type supports forwarding of network packets
with datagram boundaries intact between endpoints equipped with
interfaces like the BSD tun(4) device. Tunnel forwarding channels are
requested by the client with the following packet:

        byte            SSH_MSG_CHANNEL_OPEN
        string          "tun@openssh.com"
        uint32          sender channel
        uint32          initial window size
        uint32          maximum packet size
        uint32          tunnel mode
        uint32          remote unit number

The "tunnel mode" parameter specifies whether the tunnel should forward
layer 2 frames or layer 3 packets. It may take one of the following values:

        SSH_TUNMODE_POINTOPOINT  1              /* layer 3 packets */
        SSH_TUNMODE_ETHERNET     2              /* layer 2 frames */

The "tunnel unit number" specifies the remote interface number, or may
be 0x7fffffff to allow the server to automatically choose an interface. A
server that is not willing to open a client-specified unit should refuse
the request with a SSH_MSG_CHANNEL_OPEN_FAILURE error. On successful
open, the server should reply with SSH_MSG_CHANNEL_OPEN_SUCCESS.

Once established the client and server may exchange packet or frames
over the tunnel channel by encapsulating them in SSH protocol strings
and sending them as channel data. This ensures that packet boundaries
are kept intact. Specifically, packets are transmitted using normal
SSH_MSG_CHANNEL_DATA packets:

        byte            SSH_MSG_CHANNEL_DATA
        uint32          recipient channel
        string          data

The contents of the "data" field for layer 3 packets is:

        uint32                  packet length
        uint32                  address family
        byte[packet length - 4] packet data

The "address family" field identifies the type of packet in the message.
It may be one of:

        SSH_TUN_AF_INET         2               /* IPv4 */
        SSH_TUN_AF_INET6        24              /* IPv6 */

The "packet data" field consists of the IPv4/IPv6 datagram itself
without any link layer header.

The contents of the "data" field for layer 2 packets is:

        uint32                  packet length
        byte[packet length]     frame

The "frame" field contains an IEEE 802.3 Ethernet frame, including
header.

2.4. connection: Unix domain socket forwarding

OpenSSH supports local and remote Unix domain socket forwarding
using the "streamlocal" extension.  Forwarding is initiated as per
TCP sockets but with a single path instead of a host and port.

Similar to direct-tcpip, direct-streamlocal is sent by the client
to request that the server make a connection to a Unix domain socket.

        byte            SSH_MSG_CHANNEL_OPEN
        string          "direct-streamlocal@openssh.com"
        uint32          sender channel
        uint32          initial window size
        uint32          maximum packet size
        string          socket path
        string          reserved
        uint32          reserved

Similar to forwarded-tcpip, forwarded-streamlocal is sent by the
server when the client has previously send the server a streamlocal-forward
GLOBAL_REQUEST.

        byte            SSH_MSG_CHANNEL_OPEN
        string          "forwarded-streamlocal@openssh.com"
        uint32          sender channel
        uint32          initial window size
        uint32          maximum packet size
        string          socket path
        string          reserved for future use

The reserved field is not currently defined and is ignored on the
remote end.  It is intended to be used in the future to pass
information about the socket file, such as ownership and mode.
The client currently sends the empty string for this field.

Similar to tcpip-forward, streamlocal-forward is sent by the client
to request remote forwarding of a Unix domain socket.

        byte            SSH2_MSG_GLOBAL_REQUEST
        string          "streamlocal-forward@openssh.com"
        boolean         TRUE
        string          socket path

Similar to cancel-tcpip-forward, cancel-streamlocal-forward is sent
by the client cancel the forwarding of a Unix domain socket.

        byte            SSH2_MSG_GLOBAL_REQUEST
        string          "cancel-streamlocal-forward@openssh.com"
        boolean         FALSE
        string          socket path

2.5. connection: hostkey update and rotation "hostkeys-00@openssh.com"
and "hostkeys-prove-00@openssh.com"

OpenSSH supports a protocol extension allowing a server to inform
a client of all its protocol v.2 host keys after user-authentication
has completed.

        byte            SSH_MSG_GLOBAL_REQUEST
        string          "hostkeys-00@openssh.com"
        char            0 /* want-reply */
        string[]        hostkeys

Upon receiving this message, a client should check which of the
supplied host keys are present in known_hosts.

Note that the server may send key types that the client does not
support. The client should disregard such keys if they are received.

If the client identifies any keys that are not present for the host,
it should send a "hostkeys-prove@openssh.com" message to request the
server prove ownership of the private half of the key.

        byte            SSH_MSG_GLOBAL_REQUEST
        string          "hostkeys-prove-00@openssh.com"
        char            1 /* want-reply */
        string[]        hostkeys

When a server receives this message, it should generate a signature
using each requested key over the following:

        string          "hostkeys-prove-00@openssh.com"
        string          session identifier
        string          hostkey

These signatures should be included in the reply, in the order matching
the hostkeys in the request:

        byte            SSH_MSG_REQUEST_SUCCESS
        string[]        signatures

When the client receives this reply (and not a failure), it should
validate the signatures and may update its known_hosts file, adding keys
that it has not seen before and deleting keys for the server host that
are no longer offered.

These extensions let a client learn key types that it had not previously
encountered, thereby allowing it to potentially upgrade from weaker
key algorithms to better ones. It also supports graceful key rotation:
a server may offer multiple keys of the same type for a period (to
give clients an opportunity to learn them using this extension) before
removing the deprecated key from those offered.

2.6. connection: SIGINFO support for "signal" channel request

The SSH channels protocol (RFC4254 section 6.9) supports sending a
signal to a session attached to a channel. OpenSSH supports one
extension signal "INFO@openssh.com" that allows sending SIGINFO on
BSD-derived systems.

3. SFTP protocol changes

3.1. sftp: Reversal of arguments to SSH_FXP_SYMLINK

When OpenSSH's sftp-server was implemented, the order of the arguments
to the SSH_FXP_SYMLINK method was inadvertently reversed. Unfortunately,
the reversal was not noticed until the server was widely deployed. Since
fixing this to follow the specification would cause incompatibility, the
current order was retained. For correct operation, clients should send
SSH_FXP_SYMLINK as follows:

        uint32          id
        string          targetpath
        string          linkpath

3.2. sftp: Server extension announcement in SSH_FXP_VERSION

OpenSSH's sftp-server lists the extensions it supports using the
standard extension announcement mechanism in the SSH_FXP_VERSION server
hello packet:

        uint32          3               /* protocol version */
        string          ext1-name
        string          ext1-version
        string          ext2-name
        string          ext2-version
        ...
        string          extN-name
        string          extN-version

Each extension reports its integer version number as an ASCII encoded
string, e.g. "1". The version will be incremented if the extension is
ever changed in an incompatible way. The server MAY advertise the same
extension with multiple versions (though this is unlikely). Clients MUST
check the version number before attempting to use the extension.

3.3. sftp: Extension request "posix-rename@openssh.com"

This operation provides a rename operation with POSIX semantics, which
are different to those provided by the standard SSH_FXP_RENAME in
draft-ietf-secsh-filexfer-02.txt. This request is implemented as a
SSH_FXP_EXTENDED request with the following format:

        uint32          id
        string          "posix-rename@openssh.com"
        string          oldpath
        string          newpath

On receiving this request the server will perform the POSIX operation
rename(oldpath, newpath) and will respond with a SSH_FXP_STATUS message.
This extension is advertised in the SSH_FXP_VERSION hello with version
"1".

3.4. sftp: Extension requests "statvfs@openssh.com" and
         "fstatvfs@openssh.com"

These requests correspond to the statvfs and fstatvfs POSIX system
interfaces. The "statvfs@openssh.com" request operates on an explicit
pathname, and is formatted as follows:

        uint32          id
        string          "statvfs@openssh.com"
        string          path

The "fstatvfs@openssh.com" operates on an open file handle:

        uint32          id
        string          "fstatvfs@openssh.com"
        string          handle

These requests return a SSH_FXP_STATUS reply on failure. On success they
return the following SSH_FXP_EXTENDED_REPLY reply:

        uint32          id
        uint64          f_bsize         /* file system block size */
        uint64          f_frsize        /* fundamental fs block size */
        uint64          f_blocks        /* number of blocks (unit f_frsize) */
        uint64          f_bfree         /* free blocks in file system */
        uint64          f_bavail        /* free blocks for non-root */
        uint64          f_files         /* total file inodes */
        uint64          f_ffree         /* free file inodes */
        uint64          f_favail        /* free file inodes for to non-root */
        uint64          f_fsid          /* file system id */
        uint64          f_flag          /* bit mask of f_flag values */
        uint64          f_namemax       /* maximum filename length */

The values of the f_flag bitmask are as follows:

        #define SSH_FXE_STATVFS_ST_RDONLY       0x1     /* read-only */
        #define SSH_FXE_STATVFS_ST_NOSUID       0x2     /* no setuid */

Both the "statvfs@openssh.com" and "fstatvfs@openssh.com" extensions are
advertised in the SSH_FXP_VERSION hello with version "2".

3.5. sftp: Extension request "hardlink@openssh.com"

This request is for creating a hard link to a regular file. This
request is implemented as a SSH_FXP_EXTENDED request with the
following format:

        uint32          id
        string          "hardlink@openssh.com"
        string          oldpath
        string          newpath

On receiving this request the server will perform the operation
link(oldpath, newpath) and will respond with a SSH_FXP_STATUS message.
This extension is advertised in the SSH_FXP_VERSION hello with version
"1".

3.6. sftp: Extension request "fsync@openssh.com"

This request asks the server to call fsync(2) on an open file handle.

        uint32          id
        string          "fsync@openssh.com"
        string          handle

One receiving this request, a server will call fsync(handle_fd) and will
respond with a SSH_FXP_STATUS message.

This extension is advertised in the SSH_FXP_VERSION hello with version
"1".

3.7. sftp: Extension request "lsetstat@openssh.com"

This request is like the "setstat" command, but sets file attributes on
symlinks.  It is implemented as a SSH_FXP_EXTENDED request with the
following format:

        uint32          id
        string          "lsetstat@openssh.com"
        string          path
        ATTRS           attrs

See the "setstat" command for more details.

This extension is advertised in the SSH_FXP_VERSION hello with version
"1".

3.8. sftp: Extension request "limits@openssh.com"

This request is used to determine various limits the server might impose.
Clients should not attempt to exceed these limits as the server might sever
the connection immediately.

        uint32          id
        string          "limits@openssh.com"

The server will respond with a SSH_FXP_EXTENDED_REPLY reply:

        uint32          id
        uint64          max-packet-length
        uint64          max-read-length
        uint64          max-write-length
        uint64          max-open-handles

The 'max-packet-length' applies to the total number of bytes in a
single SFTP packet.  Servers SHOULD set this at least to 34000.

The 'max-read-length' is the largest length in a SSH_FXP_READ packet.
Even if the client requests a larger size, servers will usually respond
with a shorter SSH_FXP_DATA packet.  Servers SHOULD set this at least to
32768.

The 'max-write-length' is the largest length in a SSH_FXP_WRITE packet
the server will accept.  Servers SHOULD set this at least to 32768.

The 'max-open-handles' is the maximum number of active handles that the
server allows (e.g. handles created by SSH_FXP_OPEN and SSH_FXP_OPENDIR
packets).  Servers MAY count internal file handles against this limit
(e.g. system logging or stdout/stderr), so clients SHOULD NOT expect to
open this many handles in practice.

If the server doesn't enforce a specific limit, then the field may be
set to 0.  This implies the server relies on the OS to enforce limits
(e.g. available memory or file handles), and such limits might be
dynamic.  The client SHOULD take care to not try to exceed reasonable
limits.

This extension is advertised in the SSH_FXP_VERSION hello with version
"1".

3.9. sftp: Extension request "expand-path@openssh.com"

This request supports canonicalisation of relative paths and
those that need tilde-expansion, i.e. "~", "~/..." and "~user/..."
These paths are expanded using shell-like rules and the resultant
path is canonicalised similarly to SSH2_FXP_REALPATH.

It is implemented as a SSH_FXP_EXTENDED request with the following
format:

        uint32          id
        string          "expand-path@openssh.com"
        string          path

Its reply is the same format as that of SSH2_FXP_REALPATH.

This extension is advertised in the SSH_FXP_VERSION hello with version
"1".

4. Miscellaneous changes

4.1 Public key format

OpenSSH public keys, as generated by ssh-keygen(1) and appearing in
authorized_keys files, are formatted as a single line of text consisting
of the public key algorithm name followed by a base64-encoded key blob.
The public key blob (before base64 encoding) is the same format used for
the encoding of public keys sent on the wire: as described in RFC4253
section 6.6 for RSA and DSA keys, RFC5656 section 3.1 for ECDSA keys
and the "New public key formats" section of PROTOCOL.certkeys for the
OpenSSH certificate formats.

4.2 Private key format

OpenSSH private keys, as generated by ssh-keygen(1) use the format
described in PROTOCOL.key by default. As a legacy option, PEM format
(RFC7468) private keys are also supported for RSA, DSA and ECDSA keys
and were the default format before OpenSSH 7.8.

4.3 KRL format

OpenSSH supports a compact format for Key Revocation Lists (KRLs). This
format is described in the PROTOCOL.krl file.

4.4 Connection multiplexing

OpenSSH's connection multiplexing uses messages as described in
PROTOCOL.mux over a Unix domain socket for communications between a
master instance and later clients.

$OpenBSD: PROTOCOL,v 1.42 2021/08/09 23:47:44 djm Exp $