crypto/openssh/regress/Makefile

   1 #       $OpenBSD: Makefile,v 1.94 2016/12/16 03:51:19 dtucker Exp $
   2
   3 REGRESS_TARGETS=        unit t1 t2 t3 t4 t5 t6 t7 t8 t9 t10 t11 t12 t-exec
   4 tests:          prep $(REGRESS_TARGETS)
   5
   6 # Interop tests are not run by default
   7 interop interop-tests: t-exec-interop
   8
   9 prep:
  10         test "x${USE_VALGRIND}" = "x" || mkdir -p $(OBJ)/valgrind-out
  11
  12 clean:
  13         for F in $(CLEANFILES); do rm -f $(OBJ)$$F; done
  14         test -z "${SUDO}" || ${SUDO} rm -f ${SUDO_CLEAN}
  15         rm -rf $(OBJ).putty
  16
  17 distclean:      clean
  18
  19 LTESTS=         connect \
  20                 proxy-connect \
  21                 connect-privsep \
  22                 proto-version \
  23                 proto-mismatch \
  24                 exit-status \
  25                 envpass \
  26                 transfer \
  27                 banner \
  28                 rekey \
  29                 stderr-data \
  30                 stderr-after-eof \
  31                 broken-pipe \
  32                 try-ciphers \
  33                 yes-head \
  34                 login-timeout \
  35                 agent \
  36                 agent-getpeereid \
  37                 agent-timeout \
  38                 agent-ptrace \
  39                 keyscan \
  40                 keygen-change \
  41                 keygen-convert \
  42                 keygen-moduli \
  43                 key-options \
  44                 scp \
  45                 sftp \
  46                 sftp-chroot \
  47                 sftp-cmds \
  48                 sftp-badcmds \
  49                 sftp-batch \
  50                 sftp-glob \
  51                 sftp-perm \
  52                 reconfigure \
  53                 dynamic-forward \
  54                 forwarding \
  55                 multiplex \
  56                 reexec \
  57                 brokenkeys \
  58                 sshcfgparse \
  59                 cfgparse \
  60                 cfgmatch \
  61                 addrmatch \
  62                 localcommand \
  63                 forcecommand \
  64                 portnum \
  65                 keytype \
  66                 kextype \
  67                 cert-hostkey \
  68                 cert-userkey \
  69                 host-expand \
  70                 keys-command \
  71                 forward-control \
  72                 integrity \
  73                 krl \
  74                 multipubkey \
  75                 limit-keytype \
  76                 hostkey-agent \
  77                 keygen-knownhosts \
  78                 hostkey-rotate \
  79                 principals-command \
  80                 cert-file \
  81                 cfginclude \
  82                 allow-deny-users
  83
  84
  85 #               dhgex \
  86
  87 INTEROP_TESTS=  putty-transfer putty-ciphers putty-kex conch-ciphers
  88 #INTEROP_TESTS+=ssh-com ssh-com-client ssh-com-keygen ssh-com-sftp
  89
  90 #LTESTS=        cipher-speed
  91
  92 USERNAME!=              id -un
  93 CLEANFILES=     *.core actual agent-key.* authorized_keys_${USERNAME} \
  94                 authorized_keys_${USERNAME}.* \
  95                 authorized_principals_${USERNAME} \
  96                 banner.in banner.out cert_host_key* cert_user_key* \
  97                 copy.1 copy.2 data ed25519-agent ed25519-agent* \
  98                 ed25519-agent.pub empty.in expect failed-regress.log \
  99                 failed-ssh.log failed-sshd.log hkr.* host.rsa host.rsa1 \
 100                 host_* host_ca_key* host_krl_* host_revoked_* key.* \
 101                 key.dsa-* key.ecdsa-* key.ed25519-512 key.ed25519-512.pub \
 102                 key.rsa-* keys-command-args kh.* known_hosts \
 103                 known_hosts-cert known_hosts.* krl-* ls.copy modpipe \
 104                 netcat pidfile putty.rsa2 ready regress.log remote_pid \
 105                 revoked-* rsa rsa-agent rsa-agent.pub rsa.pub rsa1 \
 106                 rsa1-agent rsa1-agent.pub rsa1.pub rsa_ssh2_cr.prv \
 107                 rsa_ssh2_crnl.prv scp-ssh-wrapper.exe \
 108                 scp-ssh-wrapper.scp setuid-allowed sftp-server.log \
 109                 sftp-server.sh sftp.log ssh-log-wrapper.sh ssh.log \
 110                 ssh_config ssh_config.* ssh_proxy ssh_proxy_bak \
 111                 ssh_proxy_envpass sshd.log sshd_config sshd_config.orig \
 112                 sshd_proxy sshd_proxy.* sshd_proxy_bak sshd_proxy_orig \
 113                 t10.out t10.out.pub t12.out t12.out.pub t2.out t3.out \
 114                 t6.out1 t6.out2 t7.out t7.out.pub t8.out t8.out.pub \
 115                 t9.out t9.out.pub testdata user_*key* user_ca* user_key*
 116
 117 SUDO_CLEAN+=    /var/run/testdata_${USERNAME} /var/run/keycommand_${USERNAME}
 118
 119 # Enable all malloc(3) randomisations and checks
 120 TEST_ENV=      "MALLOC_OPTIONS=CFGJRSUX"
 121
 122 TEST_SSH_SSHKEYGEN?=ssh-keygen
 123
 124 CPPFLAGS=-I..
 125
 126 t1:
 127         ${TEST_SSH_SSHKEYGEN} -if ${.CURDIR}/rsa_ssh2.prv | diff - ${.CURDIR}/rsa_openssh.prv
 128         tr '\n' '\r' <${.CURDIR}/rsa_ssh2.prv > ${.OBJDIR}/rsa_ssh2_cr.prv
 129         ${TEST_SSH_SSHKEYGEN} -if ${.OBJDIR}/rsa_ssh2_cr.prv | diff - ${.CURDIR}/rsa_openssh.prv
 130         awk '{print $$0 "\r"}' ${.CURDIR}/rsa_ssh2.prv > ${.OBJDIR}/rsa_ssh2_crnl.prv
 131         ${TEST_SSH_SSHKEYGEN} -if ${.OBJDIR}/rsa_ssh2_crnl.prv | diff - ${.CURDIR}/rsa_openssh.prv
 132
 133 t2:
 134         cat ${.CURDIR}/rsa_openssh.prv > $(OBJ)/t2.out
 135         chmod 600 $(OBJ)/t2.out
 136         ${TEST_SSH_SSHKEYGEN} -yf $(OBJ)/t2.out | diff - ${.CURDIR}/rsa_openssh.pub
 137
 138 t3:
 139         ${TEST_SSH_SSHKEYGEN} -ef ${.CURDIR}/rsa_openssh.pub >$(OBJ)/t3.out
 140         ${TEST_SSH_SSHKEYGEN} -if $(OBJ)/t3.out | diff - ${.CURDIR}/rsa_openssh.pub
 141
 142 t4:
 143         ${TEST_SSH_SSHKEYGEN} -E md5 -lf ${.CURDIR}/rsa_openssh.pub |\
 144                 awk '{print $$2}' | diff - ${.CURDIR}/t4.ok
 145
 146 t5:
 147         ${TEST_SSH_SSHKEYGEN} -Bf ${.CURDIR}/rsa_openssh.pub |\
 148                 awk '{print $$2}' | diff - ${.CURDIR}/t5.ok
 149
 150 t6:
 151         ${TEST_SSH_SSHKEYGEN} -if ${.CURDIR}/dsa_ssh2.prv > $(OBJ)/t6.out1
 152         ${TEST_SSH_SSHKEYGEN} -if ${.CURDIR}/dsa_ssh2.pub > $(OBJ)/t6.out2
 153         chmod 600 $(OBJ)/t6.out1
 154         ${TEST_SSH_SSHKEYGEN} -yf $(OBJ)/t6.out1 | diff - $(OBJ)/t6.out2
 155
 156 $(OBJ)/t7.out:
 157         ${TEST_SSH_SSHKEYGEN} -q -t rsa -N '' -f $@
 158
 159 t7: $(OBJ)/t7.out
 160         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t7.out > /dev/null
 161         ${TEST_SSH_SSHKEYGEN} -Bf $(OBJ)/t7.out > /dev/null
 162
 163 $(OBJ)/t8.out:
 164         ${TEST_SSH_SSHKEYGEN} -q -t dsa -N '' -f $@
 165
 166 t8: $(OBJ)/t8.out
 167         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t8.out > /dev/null
 168         ${TEST_SSH_SSHKEYGEN} -Bf $(OBJ)/t8.out > /dev/null
 169
 170 $(OBJ)/t9.out:
 171         test "${TEST_SSH_ECC}" != yes || \
 172         ${TEST_SSH_SSHKEYGEN} -q -t ecdsa -N '' -f $@
 173
 174 t9: $(OBJ)/t9.out
 175         test "${TEST_SSH_ECC}" != yes || \
 176         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t9.out > /dev/null
 177         test "${TEST_SSH_ECC}" != yes || \
 178         ${TEST_SSH_SSHKEYGEN} -Bf $(OBJ)/t9.out > /dev/null
 179
 180
 181 $(OBJ)/t10.out:
 182         ${TEST_SSH_SSHKEYGEN} -q -t ed25519 -N '' -f $@
 183
 184 t10: $(OBJ)/t10.out
 185         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t10.out > /dev/null
 186         ${TEST_SSH_SSHKEYGEN} -Bf $(OBJ)/t10.out > /dev/null
 187
 188 t11:
 189         ${TEST_SSH_SSHKEYGEN} -E sha256 -lf ${.CURDIR}/rsa_openssh.pub |\
 190                 awk '{print $$2}' | diff - ${.CURDIR}/t11.ok
 191
 192 $(OBJ)/t12.out:
 193         ${TEST_SSH_SSHKEYGEN} -q -t ed25519 -N '' -C 'test-comment-1234' -f $@
 194
 195 t12: $(OBJ)/t12.out
 196         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t12.out.pub | grep test-comment-1234 >/dev/null
 197
 198 t-exec: ${LTESTS:=.sh}
 199         @if [ "x$?" = "x" ]; then exit 0; fi; \
 200         for TEST in ""$?; do \
 201                 echo "run test $${TEST}" ... 1>&2; \
 202                 (env SUDO="${SUDO}" TEST_ENV=${TEST_ENV} ${TEST_SHELL} ${.CURDIR}/test-exec.sh ${.OBJDIR} ${.CURDIR}/$${TEST}) || exit $$?; \
 203         done
 204
 205 t-exec-interop: ${INTEROP_TESTS:=.sh}
 206         @if [ "x$?" = "x" ]; then exit 0; fi; \
 207         for TEST in ""$?; do \
 208                 echo "run test $${TEST}" ... 1>&2; \
 209                 (env SUDO="${SUDO}" TEST_ENV=${TEST_ENV} ${TEST_SHELL} ${.CURDIR}/test-exec.sh ${.OBJDIR} ${.CURDIR}/$${TEST}) || exit $$?; \
 210         done
 211
 212 # Not run by default
 213 interop: ${INTEROP_TARGETS}
 214
 215 # Unit tests, built by top-level Makefile
 216 unit:
 217         set -e ; if test -z "${SKIP_UNIT}" ; then \
 218                 V="" ; \
 219                 test "x${USE_VALGRIND}" = "x" || \
 220                     V=${.CURDIR}/valgrind-unit.sh ; \
 221                 $$V ${.OBJDIR}/unittests/sshbuf/test_sshbuf ; \
 222                 $$V ${.OBJDIR}/unittests/sshkey/test_sshkey \
 223                         -d ${.CURDIR}/unittests/sshkey/testdata ; \
 224                 $$V ${.OBJDIR}/unittests/bitmap/test_bitmap ; \
 225                 $$V ${.OBJDIR}/unittests/conversion/test_conversion ; \
 226                 $$V ${.OBJDIR}/unittests/kex/test_kex ; \
 227                 $$V ${.OBJDIR}/unittests/hostkeys/test_hostkeys \
 228                         -d ${.CURDIR}/unittests/hostkeys/testdata ; \
 229                 $$V ${.OBJDIR}/unittests/match/test_match ; \
 230                 if test "x${TEST_SSH_UTF8}" = "xyes"  ; then \
 231                         $$V ${.OBJDIR}/unittests/utf8/test_utf8 ; \
 232                 fi \
 233         fi