4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
18 ##############################################################
19 ### Important initial Boot-time options ####################
20 ##############################################################
22 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
23 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
24 apmd_enable="NO" # Run apmd to handle APM event from userland.
25 apmd_flags="" # Flags to apmd (if enabled).
26 pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
27 pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
28 pccard_beep="2" # pccard beep type.
29 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
30 pccardd_flags="" # Additional flags for pccardd.
31 pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file
32 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
33 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
34 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
35 script_name_sep=" " # Change if your startup scripts' names contain spaces
36 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
37 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
38 background_fsck="YES" # Attempt to run fsck in the background where possible.
39 extra_netfs_types="NO" # List of network extra filesystem types for delayed
40 # mount at startup (or NO).
42 ##############################################################
43 ### Network configuration sub-section ######################
44 ##############################################################
46 ### Basic network and firewall/security options: ###
47 hostname="" # Set this!
48 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
49 dhcp_program="/sbin/dhclient" # Path to dhcp client program.
50 dhcp_flags="" # Additional flags to pass to dhcp client.
51 firewall_enable="NO" # Set to YES to enable firewall functionality
52 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
53 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
54 firewall_quiet="NO" # Set to YES to suppress rule display
55 firewall_logging="NO" # Set to YES to enable events logging
56 firewall_flags="" # Flags passed to ipfw when type is a file
57 ip_portrange_first="NO" # Set first dynamically allocated port
58 ip_portrange_last="NO" # Set last dynamically allocated port
59 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
60 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
61 natd_program="/sbin/natd" # path to natd, if you want a different one.
62 natd_enable="NO" # Enable natd (if firewall_enable == YES).
63 natd_interface="" # Public interface or IPaddress to use.
64 natd_flags="" # Additional flags for natd.
65 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
66 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
67 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
68 # /usr/src/contrib/ipfilter/rules for examples
69 ipfilter_flags="" # additional flags for ipfilter
70 ipnat_enable="NO" # Set to YES to enable ipnat functionality
71 ipnat_program="/sbin/ipnat" # where the ipnat program lives
72 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
73 ipnat_flags="" # additional flags for ipnat
74 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
75 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
76 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
77 ipfs_enable="NO" # Set to YES to enable saving and restoring
78 # of state tables at shutdown and boot
79 ipfs_program="/sbin/ipfs" # where the ipfs program lives
80 ipfs_flags="" # additional flags for ipfs
81 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
82 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
83 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
84 # For the following two options, you need to have TCP_DROP_SYNFIN and
85 # TCP_RESTRICT_RST set in your kernel. Please refer to LINT for details.
86 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
87 # NOTE: this violates the TCP specification
88 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
89 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
90 network_interfaces="auto" # List of network interfaces (or "auto").
91 cloned_interfaces="" # List of cloned network interfaces to create.
92 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
93 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
94 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
95 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
97 # If you have any sppp(4) interfaces above, you might also want to set
98 # the following parameters. Refer to spppcontrol(8) for their meaning.
99 sppp_interfaces="" # List of sppp interfaces.
100 #sppp_interfaces="isp0" # example: sppp over ISDN
101 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
102 gif_interfaces="NO" # List of GIF tunnels (or "NO").
103 #gif_interfaces="gif0 gif1" # Examples typically for a router.
104 # Choose correct tunnel addrs.
105 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
106 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
108 # User ppp configuration.
109 ppp_enable="NO" # Start user-ppp (or NO).
110 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
111 # For details see man page for ppp(8). Default is auto.
112 ppp_nat="YES" # Use PPP's internal network address translation or NO.
113 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
114 ppp_user="root" # Which user to run ppp as
116 ### Network daemon (miscellaneous) ###
117 syslogd_enable="YES" # Run syslog daemon (or NO).
118 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
119 syslogd_flags="-s" # Flags to syslogd (if enabled).
120 #syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
121 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
122 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
123 inetd_flags="-wW" # Optional flags to inetd
125 # named. It may be possible to run named in a sandbox, man security for
128 named_enable="NO" # Run named, the DNS server (or NO).
129 named_program="named" # path to named, if you want a different one.
130 named_flags="-u bind -g bind" # Flags for named
133 # kerberos. Do not run the admin daemons on slave servers
135 kerberos4_server_enable="NO" # Run a kerberos IV master server (or NO).
136 kerberos4_server="/usr/sbin/kerberos" # path to kerberos IV KDC
137 kadmind4_server_enable="NO" # Run kadmind (or NO)
138 kadmind4_server="/usr/sbin/kadmind" # path to kerberos IV admin daemon
139 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
140 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
141 kadmind5_server_enable="NO" # Run kadmind (or NO)
142 kadmind5_server="/usr/libexec/k5admind" # path to kerberos 5 admin daemon
143 kerberos_stash="" # Is the kerberos master key stashed?
145 rwhod_enable="NO" # Run the rwho daemon (or NO).
146 rwhod_flags="" # Flags for rwhod
147 rarpd_enable="NO" # Run rarpd (or NO).
148 rarpd_flags="" # Flags to rarpd.
149 xtend_enable="NO" # Run the X-10 power controller daemon.
150 xtend_flags="" # Flags to xtend (if enabled).
151 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
152 pppoed_provider="*" # Provider and ppp(8) config file entry.
153 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
154 pppoed_interface="fxp0" # The interface that pppoed runs on.
155 sshd_enable="NO" # Enable sshd
156 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
157 sshd_flags="" # Additional flags for sshd.
159 ### Network daemon (NFS): All need portmap_enable="YES" ###
160 amd_enable="NO" # Run amd service with $amd_flags (or NO).
161 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
162 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
163 nfs_client_enable="NO" # This host is an NFS client (or NO).
164 nfs_access_cache="2" # Client cache timeout in seconds
165 nfs_server_enable="NO" # This host is an NFS server (or NO).
166 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
167 single_mountd_enable="NO" # Run mountd only (or NO).
168 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
169 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
170 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
171 nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT)
172 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
173 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
174 portmap_enable="NO" # Run the portmapper service (YES/NO).
175 portmap_program="/usr/sbin/rpcbind" # path to portmap, if you want a different one.
176 portmap_flags="" # Flags to portmap (if enabled).
177 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
178 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
179 keyserv_flags="" # Flags to keyserv (if enabled).
181 ### Network Time Services options: ###
182 timed_enable="NO" # Run the time daemon (or NO).
183 timed_flags="" # Flags to timed (if enabled).
184 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
185 ntpdate_program="ntpdate" # path to ntpdate, if you want a different one.
186 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
187 xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
188 xntpd_program="ntpd" # path to ntpd, if you want a different one.
189 xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled).
191 # Network Information Services (NIS) options: All need portmap_enable="YES" ###
192 nis_client_enable="NO" # We're an NIS client (or NO).
193 nis_client_flags="" # Flags to ypbind (if enabled).
194 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
195 nis_ypset_flags="" # Flags to ypset (if enabled).
196 nis_server_enable="NO" # We're an NIS server (or NO).
197 nis_server_flags="" # Flags to ypserv (if enabled).
198 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
199 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
200 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
201 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
203 ### Network routing options: ###
204 defaultrouter="NO" # Set to default gateway (or NO).
205 static_routes="" # Set to static route list (or leave empty).
206 gateway_enable="NO" # Set to YES if this host will be a gateway.
207 router_enable="NO" # Set to YES to enable a routing daemon.
208 router="routed" # Name of routing daemon to use if enabled.
209 router_flags="-q" # Flags for routing daemon.
210 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
211 mrouted_flags="" # Flags for multicast routing daemon.
212 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
213 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
214 ipxrouted_flags="" # Flags for IPX routing daemon.
215 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
216 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
217 accept_sourceroute="NO" # accept source routed packets to us
219 ### ATM interface options: ###
220 atm_enable="NO" # Configure ATM interfaces (or NO).
221 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
222 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
223 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
224 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
225 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
226 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
227 atm_pvcs="" # Set to PVC list (or leave empty).
228 atm_arps="" # Set to permanent ARP list (or leave empty).
230 ### ISDN interface options: (see also: /usr/share/examples/isdn) ###
231 isdn_enable="NO" # Enable the ISDN subsystem (or NO).
232 isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
233 isdn_flags="-dn -d0x1f9" # Flags for isdnd
234 isdn_ttype="cons25" # terminal type for fullscreen mode
235 isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
236 isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
237 isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
239 ### Miscellaneous network options: ###
240 icmp_bmcastecho="NO" # respond to broadcast ping packets
242 ### IPv6 options: ###
243 ipv6_enable="NO" # Set to YES to set up for IPv6.
244 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
245 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
246 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
247 ipv6_static_routes="" # Set to static route list (or leave empty).
248 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
249 # route toward loopback interface.
250 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
251 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
252 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
253 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
254 ipv6_router_flags="" # Flags to IPv6 routing daemon.
255 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
257 #ipv6_network_interfaces="ed0 ep0" # Examples for router
258 # or static configuration for end node.
259 # Choose correct prefix value.
260 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
261 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
262 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
263 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
264 ipv6_default_interface="NO" # Default output interface for scoped addrs.
265 # Now this works only for IPv6 link local
267 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
268 # advertisement daemon. If set to YES,
269 # this router becomes a possible candidate
270 # IPv6 default router for local subnets.
271 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
272 mroute6d_enable="NO" # Do IPv6 multicast routing.
273 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
274 # routing daemon. You need to
275 # install it from package or
277 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
278 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
279 # tunneling interface. Specify this entry
280 # to enable 6to4 interface.
281 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
282 # to limit peer addr range. Effective value
284 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
285 # If you like, you can set "AUTO" for this.
286 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
287 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
288 # IPv6-to-IPv4 TCP translator. You also need
290 ipv6_ipv4mapping="YES" # Leave empty to disable IPv4 mapped IPv6 addr
291 # communication. (like ::ffff:a.b.c.d)
292 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
294 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
295 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
296 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
297 ipv6_firewall_logging="NO" # Set to YES to enable events logging
298 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
300 ##############################################################
301 ### System console options #################################
302 ##############################################################
304 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
305 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
306 keybell="NO" # bell to duration.pitch or normal or visual (or NO).
307 keychange="NO" # function keys default values (or NO).
308 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
309 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
310 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
311 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
312 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
313 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
314 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
315 moused_enable="NO" # Run the mouse daemon.
316 moused_type="auto" # See man page for rc.conf(5) for available settings.
317 moused_port="/dev/psm0" # Set to your mouse port.
318 moused_flags="" # Any additional flags to moused.
319 mousechar_start="NO" # if 0xd0-0xd3 default range is occuped in your
320 # language code table, specify alternative range
321 # start like mousechar_start=3, see vidcontrol(1)
322 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
323 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
326 ##############################################################
327 ### Mail Transfer Agent (MTA) options ######################
328 ##############################################################
330 mta_start_script="/etc/rc.sendmail"
331 # Script to start your chosen MTA, called by /etc/rc.
332 # Settings for /etc/rc.sendmail:
333 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO/NONE).
334 # If NONE, don't start any sendmail processes.
335 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
336 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
337 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
338 # Flags for localhost-only MTA
339 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
340 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
341 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
342 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
343 # Flags for sendmail_msp_queue daemon.
346 ##############################################################
347 ### Miscellaneous administrative options ###################
348 ##############################################################
350 cron_enable="YES" # Run the periodic job daemon.
351 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
352 cron_flags="" # Which options to pass to the cron daemon.
353 lpd_enable="NO" # Run the line printer daemon.
354 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
355 lpd_flags="" # Flags to lpd (if enabled).
356 usbd_enable="NO" # Run the usbd daemon.
357 usbd_flags="" # Flags to usbd (if enabled).
358 dumpdev="NO" # Device name to crashdump to (or NO).
359 dumpdir="/var/crash" # Directory where crash dumps are to be stored
360 savecore_flags="" # Used if dumpdev is enabled above, and present.
361 enable_quotas="NO" # turn on quotas on startup (or NO).
362 check_quotas="YES" # Check quotas on startup (or NO).
363 accounting_enable="NO" # Turn on process accounting (or NO).
364 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
365 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
366 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
367 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
368 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
369 osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO).
370 clear_tmp_enable="NO" # Clear /tmp at startup.
371 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
372 ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
373 # shared library search paths
374 ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
375 # a.out shared library search paths
376 kern_securelevel_enable="NO" # kernel security level (see init(8)),
377 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
378 lomac_enable="NO" # start lomac(4) security module at boot
379 update_motd="YES" # update version info in /etc/motd (or NO)
380 start_vinum="NO" # set to YES to start vinum
381 unaligned_print="YES" # print unaligned access warnings on the alpha (or NO).
382 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
383 # /var/db/entropy is preferred if / is not available.
384 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
385 entropy_save_sz="2048" # Size of the entropy cache files.
386 entropy_save_num="8" # Number of entropy cache files to save.
387 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
388 harvest_ethernet="YES" # Entropy device harvests ethernet randomness
389 harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
391 ##############################################################
392 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
393 ### scripts to source rc_conf_files overrides safely. ##
394 ##############################################################
396 if [ -z "${source_rc_confs_defined}" ]; then
397 source_rc_confs_defined=yes
399 local i sourced_files
400 for i in ${rc_conf_files}; do
401 case ${sourced_files} in
405 sourced_files="${sourced_files}:$i:"