3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 #rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="NO" # Enables display of informational messages at boot.
26 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
27 rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
28 early_late_divider="FILESYSTEMS" # Script that separates early/late
29 # stages of the boot process. Make sure you know
30 # the ramifications if you change this.
31 # See rc.conf(5) for more details.
32 always_force_depends="NO" # Set to check that indicated dependencies are
33 # running during boot (can increase boot time).
35 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
36 apmd_enable="NO" # Run apmd to handle APM event from userland.
37 apmd_flags="" # Flags to apmd (if enabled).
38 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
39 ddb_config="/etc/ddb.conf" # ddb(8) config file.
40 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
41 devd_flags="" # Additional flags for devd(8).
42 #kld_list="" # Kernel modules to load after local disks are mounted
43 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
44 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
45 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
46 powerd_enable="NO" # Run powerd to lower our power usage.
47 powerd_flags="" # Flags to powerd (if enabled).
48 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
49 tmpsize="20m" # Size of mfs /tmp if created
50 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
51 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
52 varsize="32m" # Size of mfs /var if created
53 varmfs_flags="-S" # Extra mount options for the mfs /var
54 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
55 cleanvar_enable="YES" # Clean the /var directory
56 local_startup="/usr/local/etc/rc.d" # startup script dirs.
57 script_name_sep=" " # Change if your startup scripts' names contain spaces
58 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
61 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
64 zfsd_enable="NO" # Set to YES to automatically start the ZFS fault
67 gptboot_enable="YES" # GPT boot success/failure reporting.
69 # Experimental - test before enabling
70 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
71 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
72 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
73 gbde_lockdir="/etc" # Where to look for gbde lockfiles
75 # GELI disk encryption configuration.
76 geli_devices="" # List of devices to automatically attach in addition to
77 # GELI devices listed in /etc/fstab.
78 geli_tries="" # Number of times to attempt attaching geli device.
79 # If empty, kern.geom.eli.tries will be used.
80 geli_default_flags="" # Default flags for geli(8).
81 geli_autodetach="YES" # Automatically detach on last close.
82 # Providers are marked as such when all file systems are
85 #geli_devices="da1 mirror/home"
86 #geli_da1_flags="-p -k /etc/geli/da1.keys"
87 #geli_da1_autodetach="NO"
88 #geli_mirror_home_flags="-k /etc/geli/home.keys"
90 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
91 root_hold_delay="30" # Time to wait for root mount hold release.
92 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
93 fsck_y_flags="" # Additional flags for fsck -y
94 background_fsck="YES" # Attempt to run fsck in the background where possible.
95 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
96 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
97 extra_netfs_types="NO" # List of network extra filesystem types for delayed
98 # mount at startup (or NO).
100 ##############################################################
101 ### Network configuration sub-section ######################
102 ##############################################################
104 ### Basic network and firewall/security options: ###
105 hostname="" # Set this!
106 hostid_enable="YES" # Set host UUID.
107 hostid_file="/etc/hostid" # File with hostuuid.
108 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
109 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
110 dhclient_flags="" # Extra flags to pass to dhcp client.
111 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
112 background_dhclient="NO" # Start dhcp client in the background.
113 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
114 synchronous_dhclient="NO" # Start dhclient directly on configured
115 # interfaces during startup.
116 defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
117 defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
118 netif_enable="YES" # Set to YES to initialize network interfaces
119 netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec.
120 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
121 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
122 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
124 firewall_enable="NO" # Set to YES to enable firewall functionality
125 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
126 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
127 firewall_quiet="NO" # Set to YES to suppress rule display
128 firewall_logging="NO" # Set to YES to enable events logging
129 firewall_logif="NO" # Set to YES to create logging-pseudo interface
130 firewall_flags="" # Flags passed to ipfw when type is a file
131 firewall_coscripts="" # List of executables/scripts to run after
132 # firewall starts/stops
133 firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
135 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
137 firewall_simple_iif="ed1" # Inside network interface for "simple"
139 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
141 firewall_simple_oif="ed0" # Outside network interface for "simple"
143 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
145 #firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
147 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
148 # for "simple" firewall.
149 #firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
151 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
152 # for "simple" firewall.
153 firewall_myservices="" # List of TCP ports on which this host
154 # offers services for "workstation" firewall.
155 firewall_allowservices="" # List of IPs which have access to
156 # $firewall_myservices for "workstation"
158 firewall_trusted="" # List of IPs which have full access to this
159 # host for "workstation" firewall.
160 firewall_logdeny="NO" # Set to YES to log default denied incoming
161 # packets for "workstation" firewall.
162 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
163 # for which denied incoming packets are not
164 # logged for "workstation" firewall.
165 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
166 firewall_nat_interface="" # Public interface or IPaddress to use
167 firewall_nat_flags="" # Additional configuration parameters
168 dummynet_enable="NO" # Load the dummynet(4) module
169 ip_portrange_first="NO" # Set first dynamically allocated port
170 ip_portrange_last="NO" # Set last dynamically allocated port
171 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
172 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
173 ike_flags="" # Additional flags for IKE daemon
174 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
175 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
176 natd_program="/sbin/natd" # path to natd, if you want a different one.
177 natd_enable="NO" # Enable natd (if firewall_enable == YES).
178 natd_interface="" # Public interface or IPaddress to use.
179 natd_flags="" # Additional flags for natd.
180 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
181 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
182 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
183 # /usr/src/contrib/ipfilter/rules for examples
184 ipfilter_flags="" # additional flags for ipfilter
185 ipnat_enable="NO" # Set to YES to enable ipnat functionality
186 ipnat_program="/sbin/ipnat" # where the ipnat program lives
187 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
188 ipnat_flags="" # additional flags for ipnat
189 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
190 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
191 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
192 ipfs_enable="NO" # Set to YES to enable saving and restoring
193 # of state tables at shutdown and boot
194 ipfs_program="/sbin/ipfs" # where the ipfs program lives
195 ipfs_flags="" # additional flags for ipfs
196 pf_enable="NO" # Set to YES to enable packet filter (pf)
197 pf_rules="/etc/pf.conf" # rules definition file for pf
198 pf_program="/sbin/pfctl" # where the pfctl program lives
199 pf_flags="" # additional flags for pfctl
200 pflog_enable="NO" # Set to YES to enable packet filter logging
201 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
202 pflog_program="/sbin/pflogd" # where the pflogd program lives
203 pflog_flags="" # additional flags for pflogd
204 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
205 ftpproxy_flags="" # additional flags for ftp-proxy(8)
206 pfsync_enable="NO" # Expose pf state to other hosts for syncing
207 pfsync_syncdev="" # Interface for pfsync to work through
208 pfsync_syncpeer="" # IP address of pfsync peer host
209 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
210 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
211 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
212 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
213 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
214 # NOTE: this violates the TCP specification
215 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
216 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
217 network_interfaces="auto" # List of network interfaces (or "auto").
218 cloned_interfaces="" # List of cloned network interfaces to create.
219 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
220 #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
221 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
222 #ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
223 #ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
224 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
225 #vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device
226 #create_args_vlan0="vlan 102" # vlan tag for vlan0 device
227 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
228 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8)
229 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
231 #autobridge_interfaces="bridge0" # List of bridges to check
232 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
234 # If you have any sppp(4) interfaces above, you might also want to set
235 # the following parameters. Refer to spppcontrol(8) for their meaning.
236 sppp_interfaces="" # List of sppp interfaces.
237 #sppp_interfaces="...0" # example: sppp over ...
238 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
240 # User ppp configuration.
241 ppp_enable="NO" # Start user-ppp (or NO).
242 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
243 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
244 # For details see man page for ppp(8). Default is auto.
245 ppp_nat="YES" # Use PPP's internal network address translation or NO.
246 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
247 ppp_user="root" # Which user to run ppp as
249 # Start multiple instances of ppp at boot time
250 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
251 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
252 #ppp_profile2_nat="NO" # Override nat mode for profile2
253 # profile3 uses default ppp_mode and ppp_nat
255 ### Network daemon (miscellaneous) ###
256 hostapd_enable="NO" # Run hostap daemon.
257 syslogd_enable="YES" # Run syslog daemon (or NO).
258 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
259 syslogd_flags="-s" # Flags to syslogd (if enabled).
260 syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted.
261 altlog_proglist="" # List of chrooted applicatioins in /var
262 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
263 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
264 inetd_flags="-wW -C 60" # Optional flags to inetd
265 iscsid_enable="NO" # iSCSI initiator daemon.
266 iscsictl_enable="NO" # iSCSI initiator autostart.
267 iscsictl_flags="-Aa" # Optional flags to iscsictl.
268 hastd_enable="NO" # Run the HAST daemon (YES/NO).
269 hastd_program="/sbin/hastd" # path to hastd, if you want a different one.
270 hastd_flags="" # Optional flags to hastd.
271 ctld_enable="NO" # CAM Target Layer / iSCSI target daemon.
272 local_unbound_enable="NO" # local caching resolver
275 # kerberos. Do not run the admin daemons on slave servers
277 kdc_enable="NO" # Run a kerberos 5 KDC (or NO).
278 kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC
279 kdc_flags="" # Additional flags to the kerberos 5 KDC
280 kadmind_enable="NO" # Run kadmind (or NO)
281 kadmind_program="/usr/libexec/kadmind" # path to kadmind
282 kpasswdd_enable="NO" # Run kpasswdd (or NO)
283 kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd
284 kfd_enable="NO" # Run kfd (or NO)
285 kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon
287 ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon
289 ipropd_master_program="/usr/libexec/ipropd-master"
290 ipropd_master_flags="" # Flags to ipropd-master.
291 ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master.
292 ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves.
293 ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon
295 ipropd_slave_program="/usr/libexec/ipropd-slave"
296 ipropd_slave_flags="" # Flags to ipropd-slave.
297 ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave.
298 ipropd_slave_master="" # master node name.
300 gssd_enable="NO" # Run the gssd daemon (or NO).
301 gssd_program="/usr/sbin/gssd" # Path to gssd.
302 gssd_flags="" # Flags for gssd.
304 rwhod_enable="NO" # Run the rwho daemon (or NO).
305 rwhod_flags="" # Flags for rwhod
306 rarpd_enable="NO" # Run rarpd (or NO).
307 rarpd_flags="-a" # Flags to rarpd.
308 bootparamd_enable="NO" # Run bootparamd (or NO).
309 bootparamd_flags="" # Flags to bootparamd
310 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
311 pppoed_provider="*" # Provider and ppp(8) config file entry.
312 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
313 pppoed_interface="fxp0" # The interface that pppoed runs on.
314 sshd_enable="NO" # Enable sshd
315 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
316 sshd_flags="" # Additional flags for sshd.
317 ftpd_enable="NO" # Enable stand-alone ftpd.
318 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
319 ftpd_flags="" # Additional flags to stand-alone ftpd.
321 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
322 amd_enable="NO" # Run amd service with $amd_flags (or NO).
323 amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
324 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
325 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
326 autofs_enable="NO" # Run autofs daemons.
327 automount_flags="" # Flags to automount(8) (if autofs enabled).
328 automountd_flags="" # Flags to automountd(8) (if autofs enabled).
329 autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
330 nfs_client_enable="NO" # This host is an NFS client (or NO).
331 nfs_access_cache="60" # Client cache timeout in seconds
332 nfs_server_enable="NO" # This host is an NFS server (or NO).
333 nfs_server_flags="-u -t" # Flags to nfsd (if enabled).
334 nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO).
335 mountd_enable="NO" # Run mountd (or NO).
336 mountd_flags="-r -S" # Flags to mountd (if NFS server enabled).
337 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
338 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
339 nfs_bufpackets="" # bufspace (in packets) for client
340 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
341 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
342 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
343 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
344 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
345 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
346 rpcbind_flags="" # Flags to rpcbind (if enabled).
347 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
348 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
349 keyserv_flags="" # Flags to keyserv (if enabled).
350 nfsv4_server_enable="NO" # Enable support for NFSv4
351 nfscbd_enable="NO" # NFSv4 client side callback daemon
352 nfscbd_flags="" # Flags for nfscbd
353 nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
354 nfsuserd_flags="" # Flags for nfsuserd
356 ### Network Time Services options: ###
357 timed_enable="NO" # Run the time daemon (or NO).
358 timed_flags="" # Flags to timed (if enabled).
359 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
360 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
361 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
362 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
363 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
364 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
365 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
366 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
367 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
368 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
369 # Flags to ntpd (if enabled).
370 ntp_src_leapfile="/etc/ntp/leap-seconds"
371 # Initial source for ntpd leapfile
372 ntp_db_leapfile="/var/db/ntpd.leap-seconds.list"
373 # Working copy (updated weekly) leapfile
374 ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list"
375 # Source from which to fetch leapfile
376 ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch,
377 # e.g. --no-verify-peer
378 ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to
380 ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch
382 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
383 nis_client_enable="NO" # We're an NIS client (or NO).
384 nis_client_flags="" # Flags to ypbind (if enabled).
385 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
386 nis_ypset_flags="" # Flags to ypset (if enabled).
387 nis_server_enable="NO" # We're an NIS server (or NO).
388 nis_server_flags="" # Flags to ypserv (if enabled).
389 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
390 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
391 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
392 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
395 # Be sure to understand the security implications of running SNMP v1/v2
397 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
398 bsnmpd_flags="" # Flags for bsnmpd.
400 ### Network routing options: ###
401 defaultrouter="NO" # Set to default gateway (or NO).
402 static_arp_pairs="" # Set to static ARP list (or leave empty).
403 static_ndp_pairs="" # Set to static NDP list (or leave empty).
404 static_routes="" # Set to static route list (or leave empty).
405 natm_static_routes="" # Set to static route list for NATM (or leave empty).
406 gateway_enable="NO" # Set to YES if this host will be a gateway.
407 routed_enable="NO" # Set to YES to enable a routing daemon.
408 routed_program="/sbin/routed" # Name of routing daemon to use if enabled.
409 routed_flags="-q" # Flags for routing daemon.
410 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
411 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
412 accept_sourceroute="NO" # accept source routed packets to us
414 ### ATM interface options: ###
415 atm_enable="NO" # Configure ATM interfaces (or NO).
416 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
417 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
418 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
419 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
420 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
421 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
422 atm_pvcs="" # Set to PVC list (or leave empty).
423 atm_arps="" # Set to permanent ARP list (or leave empty).
426 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
427 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
429 sdpd_enable="NO" # Enable sdpd(8) (or NO)
430 sdpd_control="/var/run/sdp" # sdpd(8) control socket
431 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
432 sdpd_username="nobody" # it initializes
434 bthidd_enable="NO" # Enable bthidd(8) (or NO)
435 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
436 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
438 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
439 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
441 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
442 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
443 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
444 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
446 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
447 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
448 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
449 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
451 ubthidhci_enable="NO" # Switch an USB BT controller present on
452 #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
453 #ubthidhci_addr="2" # Check usbconfig list to find the correct
454 # numbers for your system.
456 ### Network link/usability verification options
457 netwait_enable="NO" # Enable rc.d/netwait (or NO)
458 #netwait_ip="" # Wait for ping response from any IP in this list.
459 netwait_timeout="60" # Total number of seconds to perform pings.
460 #netwait_if="" # Wait for active link on each intf in this list.
461 netwait_if_timeout="30" # Total number of seconds to monitor link state.
463 ### Miscellaneous network options: ###
464 icmp_bmcastecho="NO" # respond to broadcast ping packets
466 ### IPv6 options: ###
467 ipv6_network_interfaces="auto" # List of IPv6 network interfaces
468 # (or "auto" or "none").
469 ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no
470 # corresponding $ifconfig_IF_ipv6 is
471 # marked as IFDISABLED for security
473 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
474 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
475 ipv6_static_routes="" # Set to static route list (or leave empty).
476 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
477 # route toward loopback interface.
478 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
479 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
480 ipv6_cpe_wanif="NO" # Set to the upstram interface name if this
481 # node will work as a router to forward IPv6
482 # packets not explicitly addressed to itself.
483 ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
486 route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon.
487 route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
488 route6d_flags="" # Flags to IPv6 routing daemon.
489 #route6d_flags="-l" # Example for route6d with only IPv6 site local
491 #route6d_flags="-q" # If you want to run a routing daemon on an end
492 # node, you should stop advertisement.
493 #ipv6_network_interfaces="ed0 ep0" # Examples for router
494 # or static configuration for end node.
495 # Choose correct prefix value.
496 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
497 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
498 ipv6_default_interface="NO" # Default output interface for scoped addrs.
499 # This works only with
500 # ipv6_gateway_enable="NO".
501 rtsol_flags="" # Flags to IPv6 router solicitation.
502 rtsold_enable="NO" # Set to YES to enable an IPv6 router
503 # solicitation daemon.
504 rtsold_flags="-a" # Flags to an IPv6 router solicitation
506 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
507 # advertisement daemon. If set to YES,
508 # this router becomes a possible candidate
509 # IPv6 default router for local subnets.
510 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
511 mroute6d_enable="NO" # Do IPv6 multicast routing.
512 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
513 # routing daemon. You need to
514 # install it from package or
516 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
517 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
518 # tunneling interface. Specify this entry
519 # to enable 6to4 interface.
520 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
521 # to limit peer addr range. Effective value
523 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
524 # If you like, you can set "AUTO" for this.
525 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
526 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
527 # communication. (like ::ffff:a.b.c.d)
528 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
529 # see /usr/src/contrib/ipfilter/rules
531 ip6addrctl_enable="YES" # Set to YES to enable default address selection
532 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
533 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
534 # (ipv4_prefer, ipv6_prefer, or AUTO)
536 ##############################################################
537 ### System console options #################################
538 ##############################################################
540 keyboard="" # keyboard device to use (default /dev/kbd0).
541 keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
542 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
543 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
544 keychange="NO" # function keys default values (or NO).
545 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
546 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
547 font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
548 font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
549 font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
550 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
551 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
552 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
553 # specifically overriden in rc.conf(5).
554 moused_enable="NO" # Run the mouse daemon.
555 moused_type="auto" # See man page for rc.conf(5) for available settings.
556 moused_port="/dev/psm0" # Set to your mouse port.
557 moused_flags="" # Any additional flags to moused.
558 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
559 # language code table, specify alternative range
560 # start like mousechar_start=3, see vidcontrol(1)
561 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
562 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
564 ##############################################################
565 ### Mail Transfer Agent (MTA) options ######################
566 ##############################################################
568 mta_start_script="/etc/rc.sendmail"
569 # Script to start your chosen MTA, called by /etc/rc.
570 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
571 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
572 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
573 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
574 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
575 sendmail_cert_create="YES" # Create a server certificate if none (YES/NO)
576 #sendmail_cert_cn="CN" # CN of the generate certificate
577 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
578 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
579 # Flags for localhost-only MTA
580 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
581 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
582 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
583 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
584 # Flags for sendmail_msp_queue daemon.
585 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
588 ##############################################################
589 ### Miscellaneous administrative options ###################
590 ##############################################################
592 auditd_enable="NO" # Run the audit daemon.
593 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
594 auditd_flags="" # Which options to pass to the audit daemon.
595 auditdistd_enable="NO" # Run the audit daemon.
596 auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
597 auditdistd_flags="" # Which options to pass to the auditdistd daemon.
598 cron_enable="YES" # Run the periodic job daemon.
599 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
600 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
601 cron_flags="" # Which options to pass to the cron daemon.
602 lpd_enable="NO" # Run the line printer daemon.
603 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
604 lpd_flags="" # Flags to lpd (if enabled).
605 nscd_enable="NO" # Run the nsswitch caching daemon.
606 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
607 chkprintcap_flags="-d" # Create missing directories by default.
608 dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
609 dumpdir="/var/crash" # Directory where crash dumps are to be stored
610 savecore_enable="YES" # Extract core from dump devices if any
611 savecore_flags="-m 10" # Used if dumpdev is enabled above, and present.
612 # By default, only the 10 most recent kernel dumps
614 crashinfo_enable="YES" # Automatically generate crash dump summary.
615 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
616 quota_enable="NO" # turn on quotas on startup (or NO).
617 check_quotas="YES" # Check quotas on startup (or NO).
618 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
619 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
620 quotacheck_flags="-a" # Check all file system quotas (if enabled)
621 accounting_enable="NO" # Turn on process accounting (or NO).
622 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
623 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
624 firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if
625 # this file exists. Should be on a R/W filesystem so
626 # the file can be deleted after the boot completes.
628 # Emulation/compatibility services provided by /etc/rc.d/abi
629 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
630 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
631 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
632 clear_tmp_enable="NO" # Clear /tmp at startup.
633 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
634 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
635 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
636 # shared library search paths
637 ldconfig32_paths="/usr/lib32 /usr/lib32/compat"
638 # 32-bit compatibility shared library search paths
639 ldconfigsoft_paths="/usr/libsoft /usr/libsoft/compat /usr/local/libsoft"
640 # soft float compatibility shared library search paths
641 # Note: temporarily with extra stuff for transition
642 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
643 # a.out shared library search paths
644 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
645 # Local directories with ldconfig configuration files.
646 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
647 # Local directories with 32-bit compatibility ldconfig
648 # configuration files.
649 ldconfig_localsoft_dirs="/usr/local/libdata/ldconfigsoft"
650 # Local directories with soft float compatibility ldconfig
651 # configuration files.
652 kern_securelevel_enable="NO" # kernel security level (see security(7))
653 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
654 # Note that setting securelevel to 0 will result
655 # in the system booting with securelevel set to 1, as
656 # init(8) will raise the level when rc(8) completes.
657 update_motd="YES" # update version info in /etc/motd (or NO)
658 entropy_boot_file="/boot/entropy" # Set to NO to disable very early
659 # (used at early boot time) entropy caching through reboots.
660 entropy_file="/entropy" # Set to NO to disable late (used when going multi-user)
661 # entropy through reboots.
662 # /var/db/entropy-file is preferred if / is not avail.
663 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
664 entropy_save_sz="4096" # Size of the entropy cache files.
665 entropy_save_num="8" # Number of entropy cache files to save.
666 harvest_mask="511" # Entropy device harvests all but the very invasive sources.
667 # (See 'sysctl kern.random.harvest' and random(4))
668 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
669 watchdogd_enable="NO" # Start the software watchdog daemon
670 watchdogd_flags="" # Flags to watchdogd (if enabled)
671 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
673 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
674 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
675 # apply (must be mounted already, i.e. fstab(5))
676 devfs_load_rulesets="YES" # Enable to always load the default rulesets
677 performance_cx_lowest="C2" # Online CPU idle state
678 performance_cpu_freq="NONE" # Online CPU frequency
679 economy_cx_lowest="Cmax" # Offline CPU idle state
680 economy_cpu_freq="NONE" # Offline CPU frequency
681 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
682 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
683 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
685 newsyslog_enable="YES" # Run newsyslog at startup.
686 newsyslog_flags="-CN" # Newsyslog flags to create marked files
687 mixer_enable="YES" # Run the sound mixer.
688 opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off
690 # rctl(8) requires kernel options RACCT and RCTL
691 rctl_enable="YES" # Load rctl(8) rules on boot
692 rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5).
694 iovctl_files="" # Config files for iovctl(8)
696 ##############################################################
697 ### Jail Configuration (see rc.conf(5) manual page) ##########
698 ##############################################################
699 jail_enable="NO" # Set to NO to disable starting of any jails
700 jail_parallel_start="NO" # Start jails in the background
701 jail_list="" # Space separated list of names of jails
702 jail_reverse_stop="NO" # Stop jails in reverse order
704 ##############################################################
705 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
706 ### scripts to source rc_conf_files overrides safely. ##
707 ##############################################################
709 if [ -z "${source_rc_confs_defined}" ]; then
710 source_rc_confs_defined=yes
712 local i sourced_files
713 for i in ${rc_conf_files}; do
714 case ${sourced_files} in
718 sourced_files="${sourced_files}:$i:"
725 # Re-do process to pick up [possibly] redefined $rc_conf_files
726 for i in ${rc_conf_files}; do
727 case ${sourced_files} in
731 sourced_files="${sourced_files}:$i:"