3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="NO" # Enables display of informational messages at boot.
26 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
27 early_late_divider="FILESYSTEMS" # Script that separates early/late
28 # stages of the boot process. Make sure you know
29 # the ramifications if you change this.
30 # See rc.conf(5) for more details.
32 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
33 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
34 apmd_enable="NO" # Run apmd to handle APM event from userland.
35 apmd_flags="" # Flags to apmd (if enabled).
36 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
37 ddb_config="/etc/ddb.conf" # ddb(8) config file.
38 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
39 devd_flags="" # Additional flags for devd(8).
40 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
41 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
42 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
43 powerd_enable="NO" # Run powerd to lower our power usage.
44 powerd_flags="" # Flags to powerd (if enabled).
45 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
46 tmpsize="20m" # Size of mfs /tmp if created
47 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
48 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
49 varsize="32m" # Size of mfs /var if created
50 varmfs_flags="-S" # Extra mount options for the mfs /var
51 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
52 cleanvar_enable="YES" # Clean the /var directory
53 local_startup="/usr/local/etc/rc.d" # startup script dirs.
54 script_name_sep=" " # Change if your startup scripts' names contain spaces
55 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
58 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
60 # Experimental - test before enabling
61 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
62 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
63 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
64 gbde_lockdir="/etc" # Where to look for gbde lockfiles
66 # GELI disk encryption configuration.
67 geli_devices="" # List of devices to automatically attach in addition to
68 # GELI devices listed in /etc/fstab.
69 geli_tries="" # Number of times to attempt attaching geli device.
70 # If empty, kern.geom.eli.tries will be used.
71 geli_default_flags="" # Default flags for geli(8).
72 geli_autodetach="YES" # Automatically detach on last close.
73 # Providers are marked as such when all file systems are
76 #geli_devices="da1 mirror/home"
77 #geli_da1_flags="-p -k /etc/geli/da1.keys"
78 #geli_da1_autodetach="NO"
79 #geli_mirror_home_flags="-k /etc/geli/home.keys"
81 geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted
84 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
85 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
86 background_fsck="YES" # Attempt to run fsck in the background where possible.
87 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
88 netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
89 extra_netfs_types="NO" # List of network extra filesystem types for delayed
90 # mount at startup (or NO).
92 ##############################################################
93 ### Network configuration sub-section ######################
94 ##############################################################
96 ### Basic network and firewall/security options: ###
97 hostname="" # Set this!
98 hostid_enable="YES" # Set host UUID.
99 hostid_file="/etc/hostid" # File with hostuuid.
100 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
101 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
102 dhclient_flags="" # Extra flags to pass to dhcp client.
103 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
104 background_dhclient="NO" # Start dhcp client in the background.
105 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
106 synchronous_dhclient="YES" # Start dhclient directly on configured
107 # interfaces during startup.
108 firewall_enable="NO" # Set to YES to enable firewall functionality
109 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
110 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
111 firewall_quiet="NO" # Set to YES to suppress rule display
112 firewall_logging="NO" # Set to YES to enable events logging
113 firewall_flags="" # Flags passed to ipfw when type is a file
114 firewall_client_net="192.0.2.0/24" # Network address for "client" firewall.
115 firewall_simple_iif="ed1" # Inside network interface for "simple"
117 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
119 firewall_simple_oif="ed0" # Outside network interface for "simple"
121 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
123 firewall_myservices="" # List of TCP ports on which this host
124 # offers services for "workstation" firewall.
125 firewall_allowservices="" # List of IPs which have access to
126 # $firewall_myservices for "workstation"
128 firewall_trusted="" # List of IPs which have full access to this
129 # host for "workstation" firewall.
130 firewall_logdeny="NO" # Set to YES to log default denied incoming
131 # packets for "workstation" firewall.
132 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
133 # for which denied incoming packets are not
134 # logged for "workstation" firewall.
135 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
136 firewall_nat_interface="" # Public interface or IPaddress to use
137 firewall_nat_flags="" # Additional configuration parameters
138 dummynet_enable="NO" # Load the dummynet(4) module
139 ip_portrange_first="NO" # Set first dynamically allocated port
140 ip_portrange_last="NO" # Set last dynamically allocated port
141 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
142 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
143 ike_flags="" # Additional flags for IKE daemon
144 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
145 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
146 natd_program="/sbin/natd" # path to natd, if you want a different one.
147 natd_enable="NO" # Enable natd (if firewall_enable == YES).
148 natd_interface="" # Public interface or IPaddress to use.
149 natd_flags="" # Additional flags for natd.
150 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
151 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
152 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
153 # /usr/src/contrib/ipfilter/rules for examples
154 ipfilter_flags="" # additional flags for ipfilter
155 ipnat_enable="NO" # Set to YES to enable ipnat functionality
156 ipnat_program="/sbin/ipnat" # where the ipnat program lives
157 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
158 ipnat_flags="" # additional flags for ipnat
159 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
160 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
161 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
162 ipfs_enable="NO" # Set to YES to enable saving and restoring
163 # of state tables at shutdown and boot
164 ipfs_program="/sbin/ipfs" # where the ipfs program lives
165 ipfs_flags="" # additional flags for ipfs
166 pf_enable="NO" # Set to YES to enable packet filter (pf)
167 pf_rules="/etc/pf.conf" # rules definition file for pf
168 pf_program="/sbin/pfctl" # where the pfctl program lives
169 pf_flags="" # additional flags for pfctl
170 pflog_enable="NO" # Set to YES to enable packet filter logging
171 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
172 pflog_program="/sbin/pflogd" # where the pflogd program lives
173 pflog_flags="" # additional flags for pflogd
174 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
175 ftpproxy_flags="" # additional flags for ftp-proxy(8)
176 pfsync_enable="NO" # Expose pf state to other hosts for syncing
177 pfsync_syncdev="" # Interface for pfsync to work through
178 pfsync_syncpeer="" # IP address of pfsync peer host
179 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
180 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
181 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
182 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
183 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
184 # NOTE: this violates the TCP specification
185 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
186 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
187 network_interfaces="auto" # List of network interfaces (or "auto").
188 cloned_interfaces="" # List of cloned network interfaces to create.
189 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
190 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
191 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
192 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
193 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
194 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
196 #autobridge_interfaces="bridge0" # List of bridges to check
197 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
199 # If you have any sppp(4) interfaces above, you might also want to set
200 # the following parameters. Refer to spppcontrol(8) for their meaning.
201 sppp_interfaces="" # List of sppp interfaces.
202 #sppp_interfaces="isp0" # example: sppp over ISDN
203 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
204 gif_interfaces="" # List of GIF tunnels.
205 #gif_interfaces="gif0 gif1" # Examples typically for a router.
206 # Choose correct tunnel addrs.
207 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
208 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
209 fec_interfaces="" # List of Fast EtherChannels.
210 #fec_interfaces="fec0 fec1"
211 #fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs
212 #fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs
214 # User ppp configuration.
215 ppp_enable="NO" # Start user-ppp (or NO).
216 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
217 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
218 # For details see man page for ppp(8). Default is auto.
219 ppp_nat="YES" # Use PPP's internal network address translation or NO.
220 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
221 ppp_user="root" # Which user to run ppp as
223 # Start multiple instances of ppp at boot time
224 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
225 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
226 #ppp_profile2_nat="NO" # Override nat mode for profile2
227 # profile3 uses default ppp_mode and ppp_nat
229 ### Network daemon (miscellaneous) ###
230 hostapd_enable="NO" # Run hostap daemon.
231 syslogd_enable="YES" # Run syslog daemon (or NO).
232 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
233 syslogd_flags="-s" # Flags to syslogd (if enabled).
234 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
235 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
236 inetd_flags="-wW -C 60" # Optional flags to inetd
238 # named. It may be possible to run named in a sandbox, man security for
241 named_enable="NO" # Run named, the DNS server (or NO).
242 named_program="/usr/sbin/named" # Path to named, if you want a different one.
243 #named_flags="-c /etc/namedb/named.conf" # Uncomment for named not in /usr/sbin
244 named_pidfile="/var/run/named/pid" # Must set this in named.conf as well
245 named_uid="bind" # User to run named as
246 named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it)
247 named_chroot_autoupdate="YES" # Automatically install/update chrooted
248 # components of named. See /etc/rc.d/named.
249 named_symlink_enable="YES" # Symlink the chrooted pid file
252 # kerberos. Do not run the admin daemons on slave servers
254 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
255 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
256 kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server
257 kadmind5_server_enable="NO" # Run kadmind (or NO)
258 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
259 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
260 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
262 rwhod_enable="NO" # Run the rwho daemon (or NO).
263 rwhod_flags="" # Flags for rwhod
264 rarpd_enable="NO" # Run rarpd (or NO).
265 rarpd_flags="-a" # Flags to rarpd.
266 bootparamd_enable="NO" # Run bootparamd (or NO).
267 bootparamd_flags="" # Flags to bootparamd
268 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
269 pppoed_provider="*" # Provider and ppp(8) config file entry.
270 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
271 pppoed_interface="fxp0" # The interface that pppoed runs on.
272 sshd_enable="NO" # Enable sshd
273 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
274 sshd_flags="" # Additional flags for sshd.
275 ftpd_enable="NO" # Enable stand-alone ftpd.
276 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
277 ftpd_flags="" # Additional flags to stand-alone ftpd.
279 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
280 amd_enable="NO" # Run amd service with $amd_flags (or NO).
281 amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
282 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
283 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
284 nfs_client_enable="NO" # This host is an NFS client (or NO).
285 nfs_access_cache="60" # Client cache timeout in seconds
286 nfs_server_enable="NO" # This host is an NFS server (or NO).
287 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
288 idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO).
289 idmapd_flags="" # Additional flags for idmapd.
290 mountd_enable="NO" # Run mountd (or NO).
291 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
292 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
293 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
294 nfs_bufpackets="" # bufspace (in packets) for client
295 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
296 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
297 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
298 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
299 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
300 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
301 rpcbind_flags="" # Flags to rpcbind (if enabled).
302 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
303 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
304 keyserv_flags="" # Flags to keyserv (if enabled).
306 ### Network Time Services options: ###
307 timed_enable="NO" # Run the time daemon (or NO).
308 timed_flags="" # Flags to timed (if enabled).
309 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
310 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
311 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
312 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
313 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
314 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
315 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
316 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
317 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
318 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
319 # Flags to ntpd (if enabled).
321 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
322 nis_client_enable="NO" # We're an NIS client (or NO).
323 nis_client_flags="" # Flags to ypbind (if enabled).
324 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
325 nis_ypset_flags="" # Flags to ypset (if enabled).
326 nis_server_enable="NO" # We're an NIS server (or NO).
327 nis_server_flags="" # Flags to ypserv (if enabled).
328 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
329 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
330 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
331 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
334 # Be sure to understand the security implications of running SNMP v1/v2
336 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
337 bsnmpd_flags="" # Flags for bsnmpd.
339 ### Network routing options: ###
340 defaultrouter="NO" # Set to default gateway (or NO).
341 static_routes="" # Set to static route list (or leave empty).
342 natm_static_routes="" # Set to static route list for NATM (or leave empty).
343 gateway_enable="NO" # Set to YES if this host will be a gateway.
344 router_enable="NO" # Set to YES to enable a routing daemon.
345 router="/sbin/routed" # Name of routing daemon to use if enabled.
346 router_flags="-q" # Flags for routing daemon.
347 mrouted_enable="NO" # Do IPv4 multicast routing.
348 mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
349 # routing daemon. You need to
350 # install it from package or
352 mrouted_flags="" # Flags for multicast routing daemon.
353 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
354 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
355 ipxrouted_flags="" # Flags for IPX routing daemon.
356 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
357 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
358 accept_sourceroute="NO" # accept source routed packets to us
360 ### ATM interface options: ###
361 atm_enable="NO" # Configure ATM interfaces (or NO).
362 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
363 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
364 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
365 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
366 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
367 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
368 atm_pvcs="" # Set to PVC list (or leave empty).
369 atm_arps="" # Set to permanent ARP list (or leave empty).
371 ### ISDN interface options: (see also: /usr/share/examples/isdn) ###
372 isdn_enable="NO" # Enable the ISDN subsystem (or NO).
373 isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
374 isdn_flags="-dn -d0x1f9" # Flags for isdnd
375 isdn_ttype="cons25" # terminal type for fullscreen mode
376 isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
377 isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
378 isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
381 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
382 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
384 sdpd_enable="NO" # Enable sdpd(8) (or NO)
385 sdpd_control="/var/run/sdp" # sdpd(8) control socket
386 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
387 sdpd_username="nobody" # it initializes
389 bthidd_enable="NO" # Enable bthidd(8) (or NO)
390 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
391 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
393 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
394 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
396 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
397 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
398 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
399 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
401 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
402 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
403 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
404 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
406 ### Miscellaneous network options: ###
407 icmp_bmcastecho="NO" # respond to broadcast ping packets
409 ### IPv6 options: ###
410 ipv6_enable="NO" # Set to YES to set up for IPv6.
411 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
412 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
413 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
414 ipv6_static_routes="" # Set to static route list (or leave empty).
415 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
416 # route toward loopback interface.
417 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
418 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
419 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
420 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
421 ipv6_router_flags="" # Flags to IPv6 routing daemon.
422 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
424 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
425 # node, you should stop advertisement.
426 #ipv6_network_interfaces="ed0 ep0" # Examples for router
427 # or static configuration for end node.
428 # Choose correct prefix value.
429 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
430 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
431 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
432 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
433 ipv6_default_interface="NO" # Default output interface for scoped addrs.
434 # Now this works only for IPv6 link local
436 rtsol_flags="" # Flags to IPv6 router solicitation.
437 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
438 # advertisement daemon. If set to YES,
439 # this router becomes a possible candidate
440 # IPv6 default router for local subnets.
441 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
442 mroute6d_enable="NO" # Do IPv6 multicast routing.
443 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
444 # routing daemon. You need to
445 # install it from package or
447 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
448 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
449 # tunneling interface. Specify this entry
450 # to enable 6to4 interface.
451 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
452 # to limit peer addr range. Effective value
454 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
455 # If you like, you can set "AUTO" for this.
456 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
457 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
458 # IPv6-to-IPv4 TCP translator. You also need
460 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
461 # communication. (like ::ffff:a.b.c.d)
462 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
464 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
465 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
466 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
467 ipv6_firewall_logging="NO" # Set to YES to enable events logging
468 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
469 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
470 # see /usr/src/contrib/ipfilter/rules
472 ip6addrctl_enable="YES" # Set to YES to enable default address selection
473 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
475 ##############################################################
476 ### System console options #################################
477 ##############################################################
479 keyboard="" # keyboard device to use (default /dev/kbd0).
480 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
481 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
482 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
483 keychange="NO" # function keys default values (or NO).
484 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
485 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
486 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
487 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
488 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
489 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
490 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
491 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
492 # specifically overriden in rc.conf(5).
493 moused_enable="NO" # Run the mouse daemon.
494 moused_type="auto" # See man page for rc.conf(5) for available settings.
495 moused_port="/dev/psm0" # Set to your mouse port.
496 moused_flags="" # Any additional flags to moused.
497 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
498 # language code table, specify alternative range
499 # start like mousechar_start=3, see vidcontrol(1)
500 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
501 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
503 ##############################################################
504 ### Mail Transfer Agent (MTA) options ######################
505 ##############################################################
507 mta_start_script="/etc/rc.sendmail"
508 # Script to start your chosen MTA, called by /etc/rc.
509 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
510 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
511 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
512 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
513 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
514 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
515 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
516 # Flags for localhost-only MTA
517 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
518 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
519 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
520 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
521 # Flags for sendmail_msp_queue daemon.
522 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
525 ##############################################################
526 ### Miscellaneous administrative options ###################
527 ##############################################################
529 auditd_enable="NO" # Run the audit daemon.
530 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
531 auditd_flags="" # Which options to pass to the audit daemon.
532 cron_enable="YES" # Run the periodic job daemon.
533 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
534 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
535 cron_flags="" # Which options to pass to the cron daemon.
536 lpd_enable="NO" # Run the line printer daemon.
537 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
538 lpd_flags="" # Flags to lpd (if enabled).
539 nscd_enable="NO" # Run the nsswitch caching daemon.
540 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
541 chkprintcap_flags="-d" # Create missing directories by default.
542 dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
543 dumpdir="/var/crash" # Directory where crash dumps are to be stored
544 savecore_flags="" # Used if dumpdev is enabled above, and present.
545 crashinfo_enable="NO" # Automatically generate crash dump summary.
546 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
547 enable_quotas="NO" # turn on quotas on startup (or NO).
548 check_quotas="YES" # Check quotas on startup (or NO).
549 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
550 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
551 quotacheck_flags="-a" # Check all file system quotas (if enabled)
552 accounting_enable="NO" # Turn on process accounting (or NO).
553 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
554 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
556 # Emulation/compatibility services provided by /etc/rc.d/abi
557 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
558 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
559 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
560 clear_tmp_enable="NO" # Clear /tmp at startup.
561 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
562 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
563 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
564 # shared library search paths
565 ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
566 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
567 # a.out shared library search paths
568 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
569 # Local directories with ldconfig configuration files.
570 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
571 # Local directories with 32-bit compatibility ldconfig
572 # configuration files.
573 kern_securelevel_enable="NO" # kernel security level (see security(7))
574 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
575 # Note that setting securelevel to 0 will result
576 # in the system booting with securelevel set to 1, as
577 # init(8) will raise the level when rc(8) completes.
578 update_motd="YES" # update version info in /etc/motd (or NO)
579 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
580 # /var/db/entropy-file is preferred if / is not avail.
581 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
582 entropy_save_sz="2048" # Size of the entropy cache files.
583 entropy_save_num="8" # Number of entropy cache files to save.
584 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
585 harvest_ethernet="YES" # Entropy device harvests ethernet randomness
586 harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
587 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
588 watchdogd_enable="NO" # Start the software watchdog daemon
589 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
591 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
592 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
593 # apply (must be mounted already, i.e. fstab(5))
594 performance_cx_lowest="HIGH" # Online CPU idle state
595 performance_cpu_freq="NONE" # Online CPU frequency
596 economy_cx_lowest="HIGH" # Offline CPU idle state
597 economy_cpu_freq="NONE" # Offline CPU frequency
598 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
599 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
600 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
602 newsyslog_enable="YES" # Run newsyslog at startup.
603 newsyslog_flags="-CN" # Newsyslog flags to create marked files
604 mixer_enable="YES" # Run the sound mixer.
606 ##############################################################
607 ### Jail Configuration #######################################
608 ##############################################################
609 jail_enable="NO" # Set to NO to disable starting of any jails
610 jail_list="" # Space separated list of names of jails
611 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
612 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
613 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
616 # To use rc's built-in jail infrastructure create entries for
617 # each jail, specified in jail_list, with the following variables.
619 # - replace 'example' with the jail's name.
620 # - except rootdir, hostname, ip and the _multi<n> addresses,
621 # all of the following variables may be made global jail variables
622 # if you don't specify a jail name (ie. jail_interface, jail_devfs_ruleset).
624 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
625 #jail_example_hostname="default.domain.com" # Jail's hostname
626 #jail_example_interface="" # Jail's interface variable to create IP aliases on
627 #jail_example_fib="0" # Routing table for setfib(1)
628 #jail_example_ip="192.0.2.10,2001:db8::17" # Jail's primary IPv4 and IPv6 address
629 #jail_example_ip_multi0="2001:db8::10" # and another IPv6 address
630 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
631 #jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for
632 # starting the jail. More than one can be
633 # specified using a trailing number
634 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
635 #jail_example_devfs_enable="NO" # mount devfs in the jail
636 #jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail -
637 # usually you want "devfsrules_jail".
638 #jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
639 #jail_example_procfs_enable="NO" # mount procfs in jail
640 #jail_example_mount_enable="NO" # mount/umount jail's fs
641 #jail_example_fstab="" # fstab(5) for mount/umount
642 #jail_example_flags="-l -U root" # flags for jail(8)
644 ##############################################################
645 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
646 ### scripts to source rc_conf_files overrides safely. ##
647 ##############################################################
649 if [ -z "${source_rc_confs_defined}" ]; then
650 source_rc_confs_defined=yes
652 local i sourced_files
653 for i in ${rc_conf_files}; do
654 case ${sourced_files} in
658 sourced_files="${sourced_files}:$i:"