3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="NO" # Enables display of informational messages at boot.
26 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
27 rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
28 early_late_divider="FILESYSTEMS" # Script that separates early/late
29 # stages of the boot process. Make sure you know
30 # the ramifications if you change this.
31 # See rc.conf(5) for more details.
32 always_force_depends="NO" # Set to check that indicated dependencies are
33 # running during boot (can increase boot time).
35 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
36 apmd_enable="NO" # Run apmd to handle APM event from userland.
37 apmd_flags="" # Flags to apmd (if enabled).
38 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
39 ddb_config="/etc/ddb.conf" # ddb(8) config file.
40 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
41 devd_flags="" # Additional flags for devd(8).
42 #kld_list="" # Kernel modules to load after local disks are mounted
43 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
44 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
45 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
46 powerd_enable="NO" # Run powerd to lower our power usage.
47 powerd_flags="" # Flags to powerd (if enabled).
48 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
49 tmpsize="20m" # Size of mfs /tmp if created
50 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
51 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
52 varsize="32m" # Size of mfs /var if created
53 varmfs_flags="-S" # Extra mount options for the mfs /var
54 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
55 cleanvar_enable="YES" # Clean the /var directory
56 local_startup="/usr/local/etc/rc.d" # startup script dirs.
57 script_name_sep=" " # Change if your startup scripts' names contain spaces
58 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
61 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
63 gptboot_enable="YES" # GPT boot success/failure reporting.
65 # Experimental - test before enabling
66 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
67 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
68 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
69 gbde_lockdir="/etc" # Where to look for gbde lockfiles
71 # GELI disk encryption configuration.
72 geli_devices="" # List of devices to automatically attach in addition to
73 # GELI devices listed in /etc/fstab.
74 geli_tries="" # Number of times to attempt attaching geli device.
75 # If empty, kern.geom.eli.tries will be used.
76 geli_default_flags="" # Default flags for geli(8).
77 geli_autodetach="YES" # Automatically detach on last close.
78 # Providers are marked as such when all file systems are
81 #geli_devices="da1 mirror/home"
82 #geli_da1_flags="-p -k /etc/geli/da1.keys"
83 #geli_da1_autodetach="NO"
84 #geli_mirror_home_flags="-k /etc/geli/home.keys"
86 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
87 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
88 fsck_y_flags="" # Additional flags for fsck -y
89 background_fsck="YES" # Attempt to run fsck in the background where possible.
90 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
91 netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB" # Net filesystems.
92 extra_netfs_types="NO" # List of network extra filesystem types for delayed
93 # mount at startup (or NO).
95 ##############################################################
96 ### Network configuration sub-section ######################
97 ##############################################################
99 ### Basic network and firewall/security options: ###
100 hostname="" # Set this!
101 hostid_enable="YES" # Set host UUID.
102 hostid_file="/etc/hostid" # File with hostuuid.
103 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
104 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
105 dhclient_flags="" # Extra flags to pass to dhcp client.
106 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
107 background_dhclient="NO" # Start dhcp client in the background.
108 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
109 synchronous_dhclient="NO" # Start dhclient directly on configured
110 # interfaces during startup.
111 defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
112 defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
113 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
114 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
115 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
117 firewall_enable="NO" # Set to YES to enable firewall functionality
118 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
119 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
120 firewall_quiet="NO" # Set to YES to suppress rule display
121 firewall_logging="NO" # Set to YES to enable events logging
122 firewall_logif="NO" # Set to YES to create logging-pseudo interface
123 firewall_flags="" # Flags passed to ipfw when type is a file
124 firewall_coscripts="" # List of executables/scripts to run after
125 # firewall starts/stops
126 firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
128 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
130 firewall_simple_iif="ed1" # Inside network interface for "simple"
132 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
134 firewall_simple_oif="ed0" # Outside network interface for "simple"
136 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
138 #firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
140 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
141 # for "simple" firewall.
142 #firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
144 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
145 # for "simple" firewall.
146 firewall_myservices="" # List of TCP ports on which this host
147 # offers services for "workstation" firewall.
148 firewall_allowservices="" # List of IPs which have access to
149 # $firewall_myservices for "workstation"
151 firewall_trusted="" # List of IPs which have full access to this
152 # host for "workstation" firewall.
153 firewall_logdeny="NO" # Set to YES to log default denied incoming
154 # packets for "workstation" firewall.
155 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
156 # for which denied incoming packets are not
157 # logged for "workstation" firewall.
158 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
159 firewall_nat_interface="" # Public interface or IPaddress to use
160 firewall_nat_flags="" # Additional configuration parameters
161 dummynet_enable="NO" # Load the dummynet(4) module
162 ip_portrange_first="NO" # Set first dynamically allocated port
163 ip_portrange_last="NO" # Set last dynamically allocated port
164 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
165 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
166 ike_flags="" # Additional flags for IKE daemon
167 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
168 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
169 natd_program="/sbin/natd" # path to natd, if you want a different one.
170 natd_enable="NO" # Enable natd (if firewall_enable == YES).
171 natd_interface="" # Public interface or IPaddress to use.
172 natd_flags="" # Additional flags for natd.
173 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
174 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
175 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
176 # /usr/src/contrib/ipfilter/rules for examples
177 ipfilter_flags="" # additional flags for ipfilter
178 ipnat_enable="NO" # Set to YES to enable ipnat functionality
179 ipnat_program="/sbin/ipnat" # where the ipnat program lives
180 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
181 ipnat_flags="" # additional flags for ipnat
182 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
183 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
184 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
185 ipfs_enable="NO" # Set to YES to enable saving and restoring
186 # of state tables at shutdown and boot
187 ipfs_program="/sbin/ipfs" # where the ipfs program lives
188 ipfs_flags="" # additional flags for ipfs
189 pf_enable="NO" # Set to YES to enable packet filter (pf)
190 pf_rules="/etc/pf.conf" # rules definition file for pf
191 pf_program="/sbin/pfctl" # where the pfctl program lives
192 pf_flags="" # additional flags for pfctl
193 pflog_enable="NO" # Set to YES to enable packet filter logging
194 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
195 pflog_program="/sbin/pflogd" # where the pflogd program lives
196 pflog_flags="" # additional flags for pflogd
197 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
198 ftpproxy_flags="" # additional flags for ftp-proxy(8)
199 pfsync_enable="NO" # Expose pf state to other hosts for syncing
200 pfsync_syncdev="" # Interface for pfsync to work through
201 pfsync_syncpeer="" # IP address of pfsync peer host
202 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
203 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
204 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
205 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
206 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
207 # NOTE: this violates the TCP specification
208 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
209 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
210 network_interfaces="auto" # List of network interfaces (or "auto").
211 cloned_interfaces="" # List of cloned network interfaces to create.
212 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
213 #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
214 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
215 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
216 #ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
217 #ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
218 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
219 #vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device
220 #create_args_vlan0="vlan 102" # vlan tag for vlan0 device
221 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
222 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8)
223 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
225 #autobridge_interfaces="bridge0" # List of bridges to check
226 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
228 # If you have any sppp(4) interfaces above, you might also want to set
229 # the following parameters. Refer to spppcontrol(8) for their meaning.
230 sppp_interfaces="" # List of sppp interfaces.
231 #sppp_interfaces="...0" # example: sppp over ...
232 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
233 gif_interfaces="" # List of GIF tunnels.
234 #gif_interfaces="gif0 gif1" # Examples typically for a router.
235 # Choose correct tunnel addrs.
236 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
237 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
238 fec_interfaces="" # List of Fast EtherChannels.
239 #fec_interfaces="fec0 fec1"
240 #fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs
241 #fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs
243 # User ppp configuration.
244 ppp_enable="NO" # Start user-ppp (or NO).
245 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
246 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
247 # For details see man page for ppp(8). Default is auto.
248 ppp_nat="YES" # Use PPP's internal network address translation or NO.
249 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
250 ppp_user="root" # Which user to run ppp as
252 # Start multiple instances of ppp at boot time
253 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
254 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
255 #ppp_profile2_nat="NO" # Override nat mode for profile2
256 # profile3 uses default ppp_mode and ppp_nat
258 ### Network daemon (miscellaneous) ###
259 hostapd_enable="NO" # Run hostap daemon.
260 syslogd_enable="YES" # Run syslog daemon (or NO).
261 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
262 syslogd_flags="-s" # Flags to syslogd (if enabled).
263 altlog_proglist="" # List of chrooted applicatioins in /var
264 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
265 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
266 inetd_flags="-wW -C 60" # Optional flags to inetd
267 iscsid_enable="NO" # iSCSI initiator daemon.
268 iscsictl_enable="NO" # iSCSI initiator autostart.
269 iscsictl_flags="-Aa" # Optional flags to iscsictl.
270 hastd_enable="NO" # Run the HAST daemon (YES/NO).
271 hastd_program="/sbin/hastd" # path to hastd, if you want a different one.
272 hastd_flags="" # Optional flags to hastd.
273 ctld_enable="NO" # CAM Target Layer / iSCSI target daemon.
274 local_unbound_enable="NO" # local caching resolver
277 # kerberos. Do not run the admin daemons on slave servers
279 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
280 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
281 kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server
282 kadmind5_server_enable="NO" # Run kadmind (or NO)
283 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
284 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
285 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
286 kfd_enable="NO" # Run kfd (or NO)
287 kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon
289 gssd_enable="NO" # Run the gssd daemon (or NO).
290 gssd_flags="" # Flags for gssd.
292 rwhod_enable="NO" # Run the rwho daemon (or NO).
293 rwhod_flags="" # Flags for rwhod
294 rarpd_enable="NO" # Run rarpd (or NO).
295 rarpd_flags="-a" # Flags to rarpd.
296 bootparamd_enable="NO" # Run bootparamd (or NO).
297 bootparamd_flags="" # Flags to bootparamd
298 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
299 pppoed_provider="*" # Provider and ppp(8) config file entry.
300 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
301 pppoed_interface="fxp0" # The interface that pppoed runs on.
302 sshd_enable="NO" # Enable sshd
303 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
304 sshd_flags="" # Additional flags for sshd.
305 ftpd_enable="NO" # Enable stand-alone ftpd.
306 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
307 ftpd_flags="" # Additional flags to stand-alone ftpd.
309 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
310 amd_enable="NO" # Run amd service with $amd_flags (or NO).
311 amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
312 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
313 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
314 nfs_client_enable="NO" # This host is an NFS client (or NO).
315 nfs_access_cache="60" # Client cache timeout in seconds
316 nfs_server_enable="NO" # This host is an NFS server (or NO).
317 oldnfs_server_enable="NO" # Run the old NFS server (YES/NO).
318 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
319 mountd_enable="NO" # Run mountd (or NO).
320 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
321 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
322 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
323 nfs_bufpackets="" # bufspace (in packets) for client
324 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
325 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
326 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
327 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
328 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
329 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
330 rpcbind_flags="" # Flags to rpcbind (if enabled).
331 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
332 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
333 keyserv_flags="" # Flags to keyserv (if enabled).
334 nfsv4_server_enable="NO" # Enable support for NFSv4
335 nfscbd_enable="NO" # NFSv4 client side callback daemon
336 nfscbd_flags="" # Flags for nfscbd
337 nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
338 nfsuserd_flags="" # Flags for nfsuserd
340 ### Network Time Services options: ###
341 timed_enable="NO" # Run the time daemon (or NO).
342 timed_flags="" # Flags to timed (if enabled).
343 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
344 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
345 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
346 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
347 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
348 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
349 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
350 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
351 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
352 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
353 # Flags to ntpd (if enabled).
355 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
356 nis_client_enable="NO" # We're an NIS client (or NO).
357 nis_client_flags="" # Flags to ypbind (if enabled).
358 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
359 nis_ypset_flags="" # Flags to ypset (if enabled).
360 nis_server_enable="NO" # We're an NIS server (or NO).
361 nis_server_flags="" # Flags to ypserv (if enabled).
362 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
363 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
364 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
365 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
368 # Be sure to understand the security implications of running SNMP v1/v2
370 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
371 bsnmpd_flags="" # Flags for bsnmpd.
373 ### Network routing options: ###
374 defaultrouter="NO" # Set to default gateway (or NO).
375 static_arp_pairs="" # Set to static ARP list (or leave empty).
376 static_ndp_pairs="" # Set to static NDP list (or leave empty).
377 static_routes="" # Set to static route list (or leave empty).
378 natm_static_routes="" # Set to static route list for NATM (or leave empty).
379 gateway_enable="NO" # Set to YES if this host will be a gateway.
380 routed_enable="NO" # Set to YES to enable a routing daemon.
381 routed_program="/sbin/routed" # Name of routing daemon to use if enabled.
382 routed_flags="-q" # Flags for routing daemon.
383 mrouted_enable="NO" # Do IPv4 multicast routing.
384 mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
385 # routing daemon. You need to
386 # install it from package or
388 mrouted_flags="" # Flags for multicast routing daemon.
389 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
390 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
391 ipxrouted_flags="" # Flags for IPX routing daemon.
392 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
393 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
394 accept_sourceroute="NO" # accept source routed packets to us
396 ### ATM interface options: ###
397 atm_enable="NO" # Configure ATM interfaces (or NO).
398 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
399 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
400 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
401 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
402 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
403 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
404 atm_pvcs="" # Set to PVC list (or leave empty).
405 atm_arps="" # Set to permanent ARP list (or leave empty).
408 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
409 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
411 sdpd_enable="NO" # Enable sdpd(8) (or NO)
412 sdpd_control="/var/run/sdp" # sdpd(8) control socket
413 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
414 sdpd_username="nobody" # it initializes
416 bthidd_enable="NO" # Enable bthidd(8) (or NO)
417 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
418 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
420 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
421 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
423 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
424 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
425 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
426 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
428 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
429 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
430 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
431 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
433 ubthidhci_enable="NO" # Switch an USB BT controller present on
434 #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
435 #ubthidhci_addr="2" # Check usbconfig list to find the correct
436 # numbers for your system.
438 ### Network link/usability verification options
439 netwait_enable="NO" # Enable rc.d/netwait (or NO)
440 #netwait_ip="" # IP addresses to be pinged by netwait.
441 netwait_timeout="60" # Total number of seconds to perform pings.
442 #netwait_if="" # Interface name to watch link state on.
443 netwait_if_timeout="30" # Total number of seconds to monitor link state.
445 ### Miscellaneous network options: ###
446 icmp_bmcastecho="NO" # respond to broadcast ping packets
448 ### IPv6 options: ###
449 ipv6_network_interfaces="auto" # List of IPv6 network interfaces
450 # (or "auto" or "none").
451 ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no
452 # corresponding $ifconfig_IF_ipv6 is
453 # marked as IFDISABLED for security
455 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
456 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
457 ipv6_static_routes="" # Set to static route list (or leave empty).
458 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
459 # route toward loopback interface.
460 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
461 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
462 ipv6_cpe_wanif="NO" # Set to the upstram interface name if this
463 # node will work as a router to forward IPv6
464 # packets not explicitly addressed to itself.
465 ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
468 route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon.
469 route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
470 route6d_flags="" # Flags to IPv6 routing daemon.
471 #route6d_flags="-l" # Example for route6d with only IPv6 site local
473 #route6d_flags="-q" # If you want to run a routing daemon on an end
474 # node, you should stop advertisement.
475 #ipv6_network_interfaces="ed0 ep0" # Examples for router
476 # or static configuration for end node.
477 # Choose correct prefix value.
478 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
479 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
480 ipv6_default_interface="NO" # Default output interface for scoped addrs.
481 # This works only with
482 # ipv6_gateway_enable="NO".
483 rtsol_flags="" # Flags to IPv6 router solicitation.
484 rtsold_enable="NO" # Set to YES to enable an IPv6 router
485 # solicitation daemon.
486 rtsold_flags="-a" # Flags to an IPv6 router solicitation
488 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
489 # advertisement daemon. If set to YES,
490 # this router becomes a possible candidate
491 # IPv6 default router for local subnets.
492 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
493 mroute6d_enable="NO" # Do IPv6 multicast routing.
494 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
495 # routing daemon. You need to
496 # install it from package or
498 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
499 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
500 # tunneling interface. Specify this entry
501 # to enable 6to4 interface.
502 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
503 # to limit peer addr range. Effective value
505 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
506 # If you like, you can set "AUTO" for this.
507 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
508 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
509 # IPv6-to-IPv4 TCP translator. You also need
511 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
512 # communication. (like ::ffff:a.b.c.d)
513 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
514 # see /usr/src/contrib/ipfilter/rules
516 ip6addrctl_enable="YES" # Set to YES to enable default address selection
517 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
518 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
519 # (ipv4_prefer, ipv6_prefer, or AUTO)
521 ##############################################################
522 ### System console options #################################
523 ##############################################################
525 keyboard="" # keyboard device to use (default /dev/kbd0).
526 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
527 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
528 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
529 keychange="NO" # function keys default values (or NO).
530 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
531 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
532 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
533 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
534 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
535 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
536 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
537 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
538 # specifically overriden in rc.conf(5).
539 moused_enable="NO" # Run the mouse daemon.
540 moused_type="auto" # See man page for rc.conf(5) for available settings.
541 moused_port="/dev/psm0" # Set to your mouse port.
542 moused_flags="" # Any additional flags to moused.
543 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
544 # language code table, specify alternative range
545 # start like mousechar_start=3, see vidcontrol(1)
546 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
547 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
549 ##############################################################
550 ### Mail Transfer Agent (MTA) options ######################
551 ##############################################################
553 mta_start_script="/etc/rc.sendmail"
554 # Script to start your chosen MTA, called by /etc/rc.
555 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
556 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
557 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
558 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
559 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
560 sendmail_cert_create="YES" # Create a server certificate if none (YES/NO)
561 #sendmail_cert_cn="CN" # CN of the generate certificate
562 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
563 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
564 # Flags for localhost-only MTA
565 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
566 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
567 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
568 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
569 # Flags for sendmail_msp_queue daemon.
570 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
573 ##############################################################
574 ### Miscellaneous administrative options ###################
575 ##############################################################
577 auditd_enable="NO" # Run the audit daemon.
578 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
579 auditd_flags="" # Which options to pass to the audit daemon.
580 auditdistd_enable="NO" # Run the audit daemon.
581 auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
582 auditdistd_flags="" # Which options to pass to the auditdistd daemon.
583 cron_enable="YES" # Run the periodic job daemon.
584 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
585 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
586 cron_flags="" # Which options to pass to the cron daemon.
587 lpd_enable="NO" # Run the line printer daemon.
588 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
589 lpd_flags="" # Flags to lpd (if enabled).
590 nscd_enable="NO" # Run the nsswitch caching daemon.
591 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
592 chkprintcap_flags="-d" # Create missing directories by default.
593 dumpdev="NO" # Device to crashdump to (device name, AUTO, or NO).
594 dumpdir="/var/crash" # Directory where crash dumps are to be stored
595 savecore_flags="-m 10" # Used if dumpdev is enabled above, and present.
596 # By default, only the 10 most recent kernel dumps
598 crashinfo_enable="YES" # Automatically generate crash dump summary.
599 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
600 quota_enable="NO" # turn on quotas on startup (or NO).
601 check_quotas="YES" # Check quotas on startup (or NO).
602 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
603 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
604 quotacheck_flags="-a" # Check all file system quotas (if enabled)
605 accounting_enable="NO" # Turn on process accounting (or NO).
606 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
607 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
608 firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if
609 # this file exists. Should be on a R/W filesystem so
610 # the file can be deleted after the boot completes.
612 # Emulation/compatibility services provided by /etc/rc.d/abi
613 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
614 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
615 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
616 clear_tmp_enable="NO" # Clear /tmp at startup.
617 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
618 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
619 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
620 # shared library search paths
621 ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
622 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
623 # a.out shared library search paths
624 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
625 # Local directories with ldconfig configuration files.
626 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
627 # Local directories with 32-bit compatibility ldconfig
628 # configuration files.
629 kern_securelevel_enable="NO" # kernel security level (see security(7))
630 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
631 # Note that setting securelevel to 0 will result
632 # in the system booting with securelevel set to 1, as
633 # init(8) will raise the level when rc(8) completes.
634 update_motd="YES" # update version info in /etc/motd (or NO)
635 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
636 # /var/db/entropy-file is preferred if / is not avail.
637 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
638 entropy_save_sz="2048" # Size of the entropy cache files.
639 entropy_save_num="8" # Number of entropy cache files to save.
640 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
641 harvest_ethernet="YES" # Entropy device harvests ethernet randomness
642 harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
643 harvest_swi="YES" # Entropy device harvests internal SWI randomness
644 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
645 watchdogd_enable="NO" # Start the software watchdog daemon
646 watchdogd_flags="" # Flags to watchdogd (if enabled)
647 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
649 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
650 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
651 # apply (must be mounted already, i.e. fstab(5))
652 devfs_load_rulesets="YES" # Enable to always load the default rulesets
653 performance_cx_lowest="HIGH" # Online CPU idle state
654 performance_cpu_freq="NONE" # Online CPU frequency
655 economy_cx_lowest="HIGH" # Offline CPU idle state
656 economy_cpu_freq="NONE" # Offline CPU frequency
657 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
658 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
659 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
661 newsyslog_enable="YES" # Run newsyslog at startup.
662 newsyslog_flags="-CN" # Newsyslog flags to create marked files
663 mixer_enable="YES" # Run the sound mixer.
664 opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off
666 ##############################################################
667 ### Jail Configuration (see rc.conf(5) manual page) ##########
668 ##############################################################
669 jail_enable="NO" # Set to NO to disable starting of any jails
670 jail_parallel_start="NO" # Start jails in the background
671 jail_list="" # Space separated list of names of jails
673 ##############################################################
674 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
675 ### scripts to source rc_conf_files overrides safely. ##
676 ##############################################################
678 if [ -z "${source_rc_confs_defined}" ]; then
679 source_rc_confs_defined=yes
681 local i sourced_files
682 for i in ${rc_conf_files}; do
683 case ${sourced_files} in
687 sourced_files="${sourced_files}:$i:"