4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
18 ##############################################################
19 ### Important initial Boot-time options ####################
20 ##############################################################
22 rc_debug="NO" # Set to YES to enable debugging output from rc.d
23 rc_info="NO" # Enables display of informational messages at boot.
24 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
25 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
26 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
27 apmd_enable="NO" # Run apmd to handle APM event from userland.
28 apmd_flags="" # Flags to apmd (if enabled).
29 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
30 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
31 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
32 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
33 pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
34 pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
35 pccard_beep="2" # pccard beep type.
36 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
37 pccardd_flags="-z" # Additional flags for pccardd.
38 pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file
39 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
40 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
41 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
42 tmpsize="20m" # Size of mfs /tmp if created
43 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
44 varsize="32m" # Size of mfs /var if created
45 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
46 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
47 script_name_sep=" " # Change if your startup scripts' names contain spaces
48 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
50 # Experimental - test before enabling
51 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
52 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
53 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
54 gbde_lockdir="/etc" # Where to look for gbde lockfiles
55 gbde_swap_enable="NO" # Set to YES to automatically initialize gbde swap
56 # devices listed in fstab with a random one-shot key
58 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
59 background_fsck="YES" # Attempt to run fsck in the background where possible.
60 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
61 netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
62 extra_netfs_types="NO" # List of network extra filesystem types for delayed
63 # mount at startup (or NO).
65 ##############################################################
66 ### Network configuration sub-section ######################
67 ##############################################################
69 ### Basic network and firewall/security options: ###
70 hostname="" # Set this!
71 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
72 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
73 dhclient_flags="" # Additional flags to pass to dhcp client.
74 background_dhclient="NO" # Start dhcp client in the background.
75 firewall_enable="NO" # Set to YES to enable firewall functionality
76 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
77 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
78 firewall_quiet="NO" # Set to YES to suppress rule display
79 firewall_logging="NO" # Set to YES to enable events logging
80 firewall_flags="" # Flags passed to ipfw when type is a file
81 ip_portrange_first="NO" # Set first dynamically allocated port
82 ip_portrange_last="NO" # Set last dynamically allocated port
83 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
84 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
85 ike_flags="" # Additional flags for IKE daemon
86 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
87 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
88 natd_program="/sbin/natd" # path to natd, if you want a different one.
89 natd_enable="NO" # Enable natd (if firewall_enable == YES).
90 natd_interface="" # Public interface or IPaddress to use.
91 natd_flags="" # Additional flags for natd.
92 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
93 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
94 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
95 # /usr/src/contrib/ipfilter/rules for examples
96 ipfilter_flags="" # additional flags for ipfilter
97 ipnat_enable="NO" # Set to YES to enable ipnat functionality
98 ipnat_program="/sbin/ipnat" # where the ipnat program lives
99 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
100 ipnat_flags="" # additional flags for ipnat
101 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
102 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
103 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
104 ipfs_enable="NO" # Set to YES to enable saving and restoring
105 # of state tables at shutdown and boot
106 ipfs_program="/sbin/ipfs" # where the ipfs program lives
107 ipfs_flags="" # additional flags for ipfs
108 pf_enable="NO" # Set to YES to enable packet filter (pf)
109 pf_rules="/etc/pf.conf" # rules definition file for pf
110 pf_program="/sbin/pfctl" # where the pfctl program lives
111 pf_flags="" # additional flags for pfctl
112 pflog_enable="NO" # Set to YES to enable packet filter logging
113 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
114 pflog_program="/sbin/pflogd" # where the pflogd program lives
115 pflog_flags="" # additional flags for pflogd
116 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
117 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
118 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
119 # For the following option you need to have TCP_DROP_SYNFIN set in your
120 # kernel. Please refer to LINT and NOTES for details.
121 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
122 # NOTE: this violates the TCP specification
123 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
124 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
125 network_interfaces="auto" # List of network interfaces (or "auto").
126 cloned_interfaces="" # List of cloned network interfaces to create.
127 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
128 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
129 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
130 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
132 # If you have any sppp(4) interfaces above, you might also want to set
133 # the following parameters. Refer to spppcontrol(8) for their meaning.
134 sppp_interfaces="" # List of sppp interfaces.
135 #sppp_interfaces="isp0" # example: sppp over ISDN
136 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
137 gif_interfaces="NO" # List of GIF tunnels (or "NO").
138 #gif_interfaces="gif0 gif1" # Examples typically for a router.
139 # Choose correct tunnel addrs.
140 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
141 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
143 # User ppp configuration.
144 ppp_enable="NO" # Start user-ppp (or NO).
145 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
146 # For details see man page for ppp(8). Default is auto.
147 ppp_nat="YES" # Use PPP's internal network address translation or NO.
148 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
149 ppp_user="root" # Which user to run ppp as
151 ### Network daemon (miscellaneous) ###
152 syslogd_enable="YES" # Run syslog daemon (or NO).
153 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
154 syslogd_flags="-s" # Flags to syslogd (if enabled).
155 #syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
156 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
157 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
158 inetd_flags="-wW -C 60" # Optional flags to inetd
160 # named. It may be possible to run named in a sandbox, man security for
163 named_enable="NO" # Run named, the DNS server (or NO).
164 named_program="/usr/sbin/named" # path to named, if you want a different one.
165 named_flags="-u bind" # Flags for named
166 named_pidfile="/var/run/named/pid" # Pid file
167 named_chrootdir="" # Chroot directory (or "" not to auto-chroot it)
168 named_chroot_autoupdate="YES" # Automatically install/update chrooted
169 # components of named. See /etc/rc.d/named.
170 named_symlink_enable="YES" # Symlink ${named_pidfile} and /var/run/ndc
171 # to their chrooted counterparts.
174 # kerberos. Do not run the admin daemons on slave servers
176 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
177 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
178 kadmind5_server_enable="NO" # Run kadmind (or NO)
179 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
180 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
181 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
183 rwhod_enable="NO" # Run the rwho daemon (or NO).
184 rwhod_flags="" # Flags for rwhod
185 rarpd_enable="NO" # Run rarpd (or NO).
186 rarpd_flags="" # Flags to rarpd.
187 bootparamd_enable="NO" # Run bootparamd (or NO).
188 bootparamd_flags="" # Flags to bootparamd
189 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
190 pppoed_provider="*" # Provider and ppp(8) config file entry.
191 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
192 pppoed_interface="fxp0" # The interface that pppoed runs on.
193 sshd_enable="NO" # Enable sshd
194 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
195 sshd_flags="" # Additional flags for sshd.
197 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
198 amd_enable="NO" # Run amd service with $amd_flags (or NO).
199 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
200 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
201 nfs_client_enable="NO" # This host is an NFS client (or NO).
202 nfs_access_cache="2" # Client cache timeout in seconds
203 nfs_server_enable="NO" # This host is an NFS server (or NO).
204 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
205 mountd_enable="NO" # Run mountd (or NO).
206 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
207 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
208 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
209 nfs_bufpackets="" # bufspace (in packets) for client
210 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
211 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
212 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
213 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
214 rpcbind_flags="" # Flags to rpcbind (if enabled).
215 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
216 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
217 keyserv_flags="" # Flags to keyserv (if enabled).
219 ### Network Time Services options: ###
220 timed_enable="NO" # Run the time daemon (or NO).
221 timed_flags="" # Flags to timed (if enabled).
222 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
223 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
224 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
225 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
226 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
227 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
228 # Flags to ntpd (if enabled).
230 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
231 nis_client_enable="NO" # We're an NIS client (or NO).
232 nis_client_flags="" # Flags to ypbind (if enabled).
233 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
234 nis_ypset_flags="" # Flags to ypset (if enabled).
235 nis_server_enable="NO" # We're an NIS server (or NO).
236 nis_server_flags="" # Flags to ypserv (if enabled).
237 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
238 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
239 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
240 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
242 ### Network routing options: ###
243 defaultrouter="NO" # Set to default gateway (or NO).
244 static_routes="" # Set to static route list (or leave empty).
245 natm_static_routes="" # Set to static route list for NATM (or leave empty).
246 gateway_enable="NO" # Set to YES if this host will be a gateway.
247 router_enable="NO" # Set to YES to enable a routing daemon.
248 router="/sbin/routed" # Name of routing daemon to use if enabled.
249 router_flags="-q" # Flags for routing daemon.
250 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
251 mrouted_flags="" # Flags for multicast routing daemon.
252 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
253 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
254 ipxrouted_flags="" # Flags for IPX routing daemon.
255 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
256 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
257 accept_sourceroute="NO" # accept source routed packets to us
259 ### ATM interface options: ###
260 atm_enable="NO" # Configure ATM interfaces (or NO).
261 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
262 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
263 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
264 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
265 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
266 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
267 atm_pvcs="" # Set to PVC list (or leave empty).
268 atm_arps="" # Set to permanent ARP list (or leave empty).
270 ### ISDN interface options: (see also: /usr/share/examples/isdn) ###
271 isdn_enable="NO" # Enable the ISDN subsystem (or NO).
272 isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
273 isdn_flags="-dn -d0x1f9" # Flags for isdnd
274 isdn_ttype="cons25" # terminal type for fullscreen mode
275 isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
276 isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
277 isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
279 ### Miscellaneous network options: ###
280 icmp_bmcastecho="NO" # respond to broadcast ping packets
282 ### IPv6 options: ###
283 ipv6_enable="NO" # Set to YES to set up for IPv6.
284 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
285 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
286 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
287 ipv6_static_routes="" # Set to static route list (or leave empty).
288 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
289 # route toward loopback interface.
290 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
291 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
292 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
293 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
294 ipv6_router_flags="" # Flags to IPv6 routing daemon.
295 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
297 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
298 # node, you should stop advertisement.
299 #ipv6_network_interfaces="ed0 ep0" # Examples for router
300 # or static configuration for end node.
301 # Choose correct prefix value.
302 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
303 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
304 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
305 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
306 ipv6_default_interface="NO" # Default output interface for scoped addrs.
307 # Now this works only for IPv6 link local
309 rtsol_flags="" # Flags to IPv6 router solicitation.
310 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
311 # advertisement daemon. If set to YES,
312 # this router becomes a possible candidate
313 # IPv6 default router for local subnets.
314 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
315 mroute6d_enable="NO" # Do IPv6 multicast routing.
316 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
317 # routing daemon. You need to
318 # install it from package or
320 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
321 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
322 # tunneling interface. Specify this entry
323 # to enable 6to4 interface.
324 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
325 # to limit peer addr range. Effective value
327 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
328 # If you like, you can set "AUTO" for this.
329 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
330 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
331 # IPv6-to-IPv4 TCP translator. You also need
333 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
334 # communication. (like ::ffff:a.b.c.d)
335 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
337 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
338 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
339 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
340 ipv6_firewall_logging="NO" # Set to YES to enable events logging
341 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
342 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
343 # see /usr/src/contrib/ipfilter/rules
345 ip6addrctl_enable="NO" # Set to YES to enable default address selection
346 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
348 ##############################################################
349 ### System console options #################################
350 ##############################################################
352 keyboard="" # keyboard device to use (default /dev/kbd0).
353 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
354 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
355 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
356 keychange="NO" # function keys default values (or NO).
357 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
358 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
359 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
360 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
361 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
362 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
363 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
364 moused_enable="NO" # Run the mouse daemon.
365 moused_type="auto" # See man page for rc.conf(5) for available settings.
366 moused_port="/dev/psm0" # Set to your mouse port.
367 moused_flags="" # Any additional flags to moused.
368 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
369 # language code table, specify alternative range
370 # start like mousechar_start=3, see vidcontrol(1)
371 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
372 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
375 ##############################################################
376 ### pcvt console driver options ############################
377 ##############################################################
379 pcvt_verbose="NO" # set to YES to enable verbose configuration messages
380 pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO).
381 pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO).
382 pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO).
383 pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO).
384 pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO).
385 pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO).
386 pcvt_lines="NO" # lines (25, 28, 40, 50 or NO).
387 pcvt_blanktime="NO" # blank time (in seconds) (or NO).
388 pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO).
389 pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO).
390 pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO).
393 ##############################################################
394 ### Mail Transfer Agent (MTA) options ######################
395 ##############################################################
397 mta_start_script="/etc/rc.sendmail"
398 # Script to start your chosen MTA, called by /etc/rc.
399 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
400 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
401 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
402 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
403 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
404 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
405 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
406 # Flags for localhost-only MTA
407 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
408 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
409 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
410 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
411 # Flags for sendmail_msp_queue daemon.
414 ##############################################################
415 ### Miscellaneous administrative options ###################
416 ##############################################################
418 cron_enable="YES" # Run the periodic job daemon.
419 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
420 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
421 cron_flags="" # Which options to pass to the cron daemon.
422 lpd_enable="NO" # Run the line printer daemon.
423 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
424 lpd_flags="" # Flags to lpd (if enabled).
425 usbd_enable="NO" # Run the usbd daemon.
426 usbd_flags="" # Flags to usbd (if enabled).
427 dumpdev="NO" # Device name to crashdump to (or NO).
428 dumpdir="/var/crash" # Directory where crash dumps are to be stored
429 savecore_flags="" # Used if dumpdev is enabled above, and present.
430 enable_quotas="NO" # turn on quotas on startup (or NO).
431 check_quotas="YES" # Check quotas on startup (or NO).
432 accounting_enable="NO" # Turn on process accounting (or NO).
433 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
434 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
435 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
436 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
437 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
438 osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO).
439 clear_tmp_enable="NO" # Clear /tmp at startup.
440 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
441 ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
442 # shared library search paths
443 ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
444 # a.out shared library search paths
445 kern_securelevel_enable="NO" # kernel security level (see init(8)),
446 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
447 lomac_enable="NO" # start lomac(4) security module at boot
448 update_motd="YES" # update version info in /etc/motd (or NO)
449 start_vinum="NO" # set to YES to start vinum
450 unaligned_print="YES" # print unaligned access warnings on the alpha (or NO).
451 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
452 # /var/db/entropy is preferred if / is not available.
453 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
454 entropy_save_sz="2048" # Size of the entropy cache files.
455 entropy_save_num="8" # Number of entropy cache files to save.
456 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
457 harvest_ethernet="YES" # Entropy device harvests ethernet randomness
458 harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
459 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
460 watchdogd_enable="NO" # Start the software watchdog daemon
461 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
463 devfs_system_ruleset="" # The name of a ruleset to apply to /dev
464 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
465 # apply (must be mounted already, i.e. fstab(5))
466 performance_cx_lowest="LOW" # Online CPU idle state
467 performance_throttle_state="HIGH" # Online throttling state
468 economy_cx_lowest="LOW" # Offline CPU idle state
469 economy_throttle_state="HIGH" # Offline throttling state
470 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
472 ##############################################################
473 ### Jail Configuration #######################################
474 ##############################################################
475 jail_enable="NO" # Set to NO to disable starting of any jails
476 jail_list="" # Space separated list of names of jails
477 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
478 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
479 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
482 # To use rc's built-in jail infrastructure create entries for
483 # each jail, specified in jail_list, with the following variables.
484 # NOTE: replace 'example' with the jail's name.
486 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
487 #jail_example_hostname="default.domain.com" # Jail's hostname
488 #jail_example_ip="192.168.0.10" # Jail's IP number
489 #jail_example_exec="/bin/sh /etc/rc" # command to execute in jail
490 #jail_example_devfs_enable="NO" # mount devfs in the jail
491 #jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
492 #jail_example_procfs_enable="NO" # mount procfs in jail
493 #jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail
495 ##############################################################
496 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
497 ### scripts to source rc_conf_files overrides safely. ##
498 ##############################################################
500 if [ -z "${source_rc_confs_defined}" ]; then
501 source_rc_confs_defined=yes
503 local i sourced_files
504 for i in ${rc_conf_files}; do
505 case ${sourced_files} in
509 sourced_files="${sourced_files}:$i:"