4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # All arguments must be in double or single quotes.
14 ##############################################################
15 ### Important initial Boot-time options ####################
16 ##############################################################
18 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
19 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
20 apmd_enable="NO" # Run apmd to handle APM event from userland.
21 apmd_flags="" # Flags to apmd (if enabled).
22 pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
23 pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
24 pccard_beep="1" # pccard beep type.
25 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
26 pccardd_flags="" # Additional flags for pccardd.
27 pccard_conf="/etc/pccard.conf.sample" # pccardd(8) config file
28 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
29 local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs
30 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
32 ##############################################################
33 ### Network configuration sub-section ######################
34 ##############################################################
36 ### Basic network options: ###
37 hostname="" # Set this!
38 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
39 dhcp_program="/sbin/dhclient" # Path to dhcp client program.
40 dhcp_flags="" # Additional flags to pass to dhcp client.
41 firewall_enable="NO" # Set to YES to enable firewall functionality
42 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
43 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
44 firewall_quiet="NO" # Set to YES to suppress rule display
45 natd_program="/sbin/natd" # path to natd, if you want a different one.
46 natd_enable="NO" # Enable natd (if firewall_enable == YES).
47 natd_interface="fxp0" # Public interface or IPaddress to use.
48 natd_flags="" # Additional flags for natd.
49 tcp_extensions="NO" # Set to YES to turn on RFC1323 extensions.
50 log_in_vain="NO" # YES to log connects to ports w/o listeners.
51 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
52 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
53 # NOTE: this breaks rfc1644 extensions (T/TCP)
54 tcp_restrict_rst="NO" # Set to YES to restrict emission of RST
55 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
56 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
57 network_interfaces="auto" # List of network interfaces (or "auto").
58 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
59 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
61 # If you have any sppp(4) interfaces above, you might also want to set
62 # the following parameters. Refer to spppcontrol(8) for their meaning.
63 sppp_interfaces="" # List of sppp interfaces.
64 #sppp_interfaces="isp0" # example: sppp over ISDN
65 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
67 # User ppp configuration.
68 ppp_enable="NO" # Start user-ppp (or NO).
69 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
70 # For details see man page for ppp(8). Default is auto.
71 ppp_nat="YES" # Use PPP's internal network address translation or NO.
72 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
74 ### Network daemon (miscellaneous) & NFS options: ###
75 syslogd_enable="YES" # Run syslog daemon (or NO).
76 syslogd_flags="" # Flags to syslogd (if enabled).
77 inetd_enable="YES" # Run the network daemon dispatcher (or NO).
78 inetd_flags="-wW" # Optional flags to inetd
80 # named. It may be possible to run named in a sandbox, man security for
83 named_enable="NO" # Run named, the DNS server (or NO).
84 named_program="named" # path to named, if you want a different one.
85 named_flags="" # Flags for named
86 #named_flags="-u bind -g bind" # Flags for named
88 kerberos_server_enable="NO" # Run a kerberos master server (or NO).
89 kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on
90 # a slave kerberos server
91 kerberos_stash="" # Is the kerberos master key stashed?
92 rwhod_enable="NO" # Run the rwho daemon (or NO).
93 rwhod_flags="" # Flags for rwhod
94 amd_enable="NO" # Run amd service with $amd_flags (or NO).
95 amd_flags="-a /.amd_mnt -c 1800 -l syslog /host /etc/amd.map /net /etc/amd.map"
96 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
97 nfs_client_enable="NO" # This host is an NFS client (or NO).
98 nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
99 nfs_access_cache="2" # Client cache timeout in seconds
100 nfs_server_enable="NO" # This host is an NFS server (or NO).
101 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
102 single_mountd_enable="NO" # Run mountd only (or NO).
103 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
104 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
105 rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
106 rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
107 portmap_enable="YES" # Run the portmapper service (or NO).
108 portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one.
109 portmap_flags="" # Flags to portmap (if enabled).
110 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
111 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
112 keyserv_flags="" # Flags to keyserv (if enabled).
113 rarpd_enable="NO" # Run rarpd (or NO).
114 rarpd_flags="" # Flags to rarpd.
115 xtend_enable="NO" # Run the X-10 power controller daemon.
116 xtend_flags="" # Flags to xtend (if enabled).
117 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
118 pppoed_provider="*" # Provider and ppp(8) config file entry.
119 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
120 pppoed_interface="fxp0" # The interface that pppoed runs on.
122 ### Network Time Services options: ###
123 timed_enable="NO" # Run the time daemon (or NO).
124 timed_flags="" # Flags to timed (if enabled).
125 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
126 ntpdate_program="ntpdate" # path to ntpdate, if you want a different one.
127 ntpdate_flags="" # Flags to ntpdate (if enabled).
128 xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
129 xntpd_program="ntpd" # path to ntpd, if you want a different one.
130 xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled).
132 # Network Information Services (NIS) options: ###
133 nis_client_enable="NO" # We're an NIS client (or NO).
134 nis_client_flags="" # Flags to ypbind (if enabled).
135 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
136 nis_ypset_flags="" # Flags to ypset (if enabled).
137 nis_server_enable="NO" # We're an NIS server (or NO).
138 nis_server_flags="" # Flags to ypserv (if enabled).
139 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
140 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
141 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
142 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
144 ### Network routing options: ###
145 defaultrouter="NO" # Set to default gateway (or NO).
146 static_routes="" # Set to static route list (or leave empty).
147 gateway_enable="NO" # Set to YES if this host will be a gateway.
148 router_enable="NO" # Set to YES to enable a routing daemon.
149 router="routed" # Name of routing daemon to use if enabled.
150 router_flags="-q" # Flags for routing daemon.
151 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
152 mrouted_flags="" # Flags for multicast routing daemon.
153 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
154 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
155 ipxrouted_flags="" # Flags for IPX routing daemon.
156 arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL.
157 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
158 accept_sourceroute="NO" # accept source routed packets to us
160 ### ATM interface options: ###
161 atm_enable="NO" # Configure ATM interfaces (or NO).
162 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
163 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
164 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
165 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
166 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
167 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
168 atm_pvcs="" # Set to PVC list (or leave empty).
169 atm_arps="" # Set to permanent ARP list (or leave empty).
171 ### ISDN interface options: ###
172 isdn_enable="NO" # Enable the ISDN subsystem (or NO).
173 isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode).
174 isdn_flags="-dn -d0x1f9" # Flags for isdnd
175 isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
176 isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
178 ### Miscellaneous network options: ###
179 icmp_bmcastecho="NO" # respond to broadcast ping packets
182 ##############################################################
183 ### System console options #################################
184 ##############################################################
186 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
187 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
188 keybell="NO" # bell to duration.pitch or normal or visual (or NO).
189 keychange="NO" # function keys default values (or NO).
190 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
191 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
192 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
193 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
194 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
195 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
196 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
197 moused_enable="NO" # Run the mouse daemon.
198 moused_type="auto" # See man page for rc.conf(5) for available settings.
199 moused_port="/dev/cuaa0" # Set to your mouse port.
200 moused_flags="" # Any additional flags to moused.
201 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
204 ##############################################################
205 ### Miscellaneous administrative options ###################
206 ##############################################################
208 cron_enable="YES" # Run the periodic job daemon.
209 lpd_enable="NO" # Run the line printer daemon.
210 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
211 lpd_flags="" # Flags to lpd (if enabled).
212 usbd_enable="NO" # Run the usbd daemon.
213 usbd_flags="" # Flags to usbd (if enabled).
214 sendmail_enable="YES" # Run the sendmail daemon (or NO).
215 sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled)
216 dumpdev="NO" # Device name to crashdump to (or NO).
217 enable_quotas="NO" # turn on quotas on startup (or NO).
218 check_quotas="YES" # Check quotas on startup (or NO).
219 accounting_enable="NO" # Turn on process accounting (or NO).
220 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
221 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
222 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
223 osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO).
224 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
225 clear_tmp_enable="NO" # Clear /tmp at startup.
226 ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
227 # shared library search paths
228 ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
229 # a.out shared library search paths
230 kern_securelevel_enable="NO" # kernel security level (see init(8)),
231 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
232 update_motd="YES" # update version info in /etc/motd (or NO)
233 start_vinum="" # set to YES to start vinum
235 ##############################################################
236 ### Allow local configuration override at the very end here ##
237 ##############################################################
241 for i in ${rc_conf_files}; do