3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 # rc_debug can't be set here without interferring with rc.subr's setting it
25 # when the kenv variable rc.debug is set.
26 #rc_debug="NO" # Set to YES to enable debugging output from rc.d
27 rc_info="NO" # Enables display of informational messages at boot.
28 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
29 rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
30 early_late_divider="FILESYSTEMS" # Script that separates early/late
31 # stages of the boot process. Make sure you know
32 # the ramifications if you change this.
33 # See rc.conf(5) for more details.
34 always_force_depends="NO" # Set to check that indicated dependencies are
35 # running during boot (can increase boot time).
37 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
38 apmd_enable="NO" # Run apmd to handle APM event from userland.
39 apmd_flags="" # Flags to apmd (if enabled).
40 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
41 ddb_config="/etc/ddb.conf" # ddb(8) config file.
42 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
43 devd_flags="" # Additional flags for devd(8).
44 #kld_list="" # Kernel modules to load after local disks are mounted
45 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
46 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
47 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
48 powerd_enable="NO" # Run powerd to lower our power usage.
49 powerd_flags="" # Flags to powerd (if enabled).
50 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
51 tmpsize="20m" # Size of mfs /tmp if created
52 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
53 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
54 varsize="32m" # Size of mfs /var if created
55 varmfs_flags="-S" # Extra mount options for the mfs /var
56 mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback
57 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
58 cleanvar_enable="YES" # Clean the /var directory
59 local_startup="/usr/local/etc/rc.d" # startup script dirs.
60 script_name_sep=" " # Change if your startup scripts' names contain spaces
61 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
64 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
67 zfsd_enable="NO" # Set to YES to automatically start the ZFS fault
70 gptboot_enable="YES" # GPT boot success/failure reporting.
72 # Experimental - test before enabling
73 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
74 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
75 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
76 gbde_lockdir="/etc" # Where to look for gbde lockfiles
78 # GELI disk encryption configuration.
79 geli_devices="" # List of devices to automatically attach in addition to
80 # GELI devices listed in /etc/fstab.
81 geli_tries="" # Number of times to attempt attaching geli device.
82 # If empty, kern.geom.eli.tries will be used.
83 geli_default_flags="" # Default flags for geli(8).
84 geli_autodetach="YES" # Automatically detach on last close.
85 # Providers are marked as such when all file systems are
88 #geli_devices="da1 mirror/home"
89 #geli_da1_flags="-p -k /etc/geli/da1.keys"
90 #geli_da1_autodetach="NO"
91 #geli_mirror_home_flags="-k /etc/geli/home.keys"
93 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
94 root_hold_delay="30" # Time to wait for root mount hold release.
95 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
96 fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y
97 background_fsck="YES" # Attempt to run fsck in the background where possible.
98 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
99 growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot
100 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
101 extra_netfs_types="NO" # List of network extra filesystem types for delayed
102 # mount at startup (or NO).
104 ##############################################################
105 ### Network configuration sub-section ######################
106 ##############################################################
108 ### Basic network and firewall/security options: ###
109 hostname="" # Set this!
110 hostid_enable="YES" # Set host UUID.
111 hostid_file="/etc/hostid" # File with hostuuid.
112 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
113 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
114 dhclient_flags="" # Extra flags to pass to dhcp client.
115 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
116 background_dhclient="NO" # Start dhcp client in the background.
117 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
118 synchronous_dhclient="NO" # Start dhclient directly on configured
119 # interfaces during startup.
120 defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
121 defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
122 netif_enable="YES" # Set to YES to initialize network interfaces
123 netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec.
124 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
125 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
126 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
128 firewall_enable="NO" # Set to YES to enable firewall functionality
129 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
130 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
131 firewall_quiet="NO" # Set to YES to suppress rule display
132 firewall_logging="NO" # Set to YES to enable events logging
133 firewall_logif="NO" # Set to YES to create logging-pseudo interface
134 firewall_flags="" # Flags passed to ipfw when type is a file
135 firewall_coscripts="" # List of executables/scripts to run after
136 # firewall starts/stops
137 firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
139 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
141 firewall_simple_iif="ed1" # Inside network interface for "simple"
143 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
145 firewall_simple_oif="ed0" # Outside network interface for "simple"
147 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
149 #firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
151 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
152 # for "simple" firewall.
153 #firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
155 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
156 # for "simple" firewall.
157 firewall_myservices="" # List of TCP ports on which this host
158 # offers services for "workstation" firewall.
159 firewall_allowservices="" # List of IPs which have access to
160 # $firewall_myservices for "workstation"
162 firewall_trusted="" # List of IPs which have full access to this
163 # host for "workstation" firewall.
164 firewall_logdeny="NO" # Set to YES to log default denied incoming
165 # packets for "workstation" firewall.
166 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
167 # for which denied incoming packets are not
168 # logged for "workstation" firewall.
169 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
170 firewall_nat_interface="" # Public interface or IPaddress to use
171 firewall_nat_flags="" # Additional configuration parameters
172 dummynet_enable="NO" # Load the dummynet(4) module
173 ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow
174 ip_portrange_first="NO" # Set first dynamically allocated port
175 ip_portrange_last="NO" # Set last dynamically allocated port
176 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
177 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
178 ike_flags="" # Additional flags for IKE daemon
179 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
180 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
181 natd_program="/sbin/natd" # path to natd, if you want a different one.
182 natd_enable="NO" # Enable natd (if firewall_enable == YES).
183 natd_interface="" # Public interface or IPaddress to use.
184 natd_flags="" # Additional flags for natd.
185 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
186 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
187 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
188 # /usr/src/contrib/ipfilter/rules for examples
189 ipfilter_flags="" # additional flags for ipfilter
190 ipnat_enable="NO" # Set to YES to enable ipnat functionality
191 ipnat_program="/sbin/ipnat" # where the ipnat program lives
192 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
193 ipnat_flags="" # additional flags for ipnat
194 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
195 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
196 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
197 ipfs_enable="NO" # Set to YES to enable saving and restoring
198 # of state tables at shutdown and boot
199 ipfs_program="/sbin/ipfs" # where the ipfs program lives
200 ipfs_flags="" # additional flags for ipfs
201 pf_enable="NO" # Set to YES to enable packet filter (pf)
202 pf_rules="/etc/pf.conf" # rules definition file for pf
203 pf_program="/sbin/pfctl" # where the pfctl program lives
204 pf_flags="" # additional flags for pfctl
205 pflog_enable="NO" # Set to YES to enable packet filter logging
206 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
207 pflog_program="/sbin/pflogd" # where the pflogd program lives
208 pflog_flags="" # additional flags for pflogd
209 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
210 ftpproxy_flags="" # additional flags for ftp-proxy(8)
211 pfsync_enable="NO" # Expose pf state to other hosts for syncing
212 pfsync_syncdev="" # Interface for pfsync to work through
213 pfsync_syncpeer="" # IP address of pfsync peer host
214 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
215 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
216 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
217 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
218 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
219 # NOTE: this violates the TCP specification
220 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
221 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
222 network_interfaces="auto" # List of network interfaces (or "auto").
223 cloned_interfaces="" # List of cloned network interfaces to create.
224 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
225 #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
226 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
227 #ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
228 #ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
229 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
230 #vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device
231 #create_args_vlan0="vlan 102" # vlan tag for vlan0 device
232 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
233 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8)
234 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
236 #autobridge_interfaces="bridge0" # List of bridges to check
237 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
239 # If you have any sppp(4) interfaces above, you might also want to set
240 # the following parameters. Refer to spppcontrol(8) for their meaning.
241 sppp_interfaces="" # List of sppp interfaces.
242 #sppp_interfaces="...0" # example: sppp over ...
243 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
245 # User ppp configuration.
246 ppp_enable="NO" # Start user-ppp (or NO).
247 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
248 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
249 # For details see man page for ppp(8). Default is auto.
250 ppp_nat="YES" # Use PPP's internal network address translation or NO.
251 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
252 ppp_user="root" # Which user to run ppp as
254 # Start multiple instances of ppp at boot time
255 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
256 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
257 #ppp_profile2_nat="NO" # Override nat mode for profile2
258 # profile3 uses default ppp_mode and ppp_nat
260 ### Network daemon (miscellaneous) ###
261 hostapd_enable="NO" # Run hostap daemon.
262 syslogd_enable="YES" # Run syslog daemon (or NO).
263 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
264 syslogd_flags="-s" # Flags to syslogd (if enabled).
265 syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted.
266 altlog_proglist="" # List of chrooted applicatioins in /var
267 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
268 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
269 inetd_flags="-wW -C 60" # Optional flags to inetd
270 iscsid_enable="NO" # iSCSI initiator daemon.
271 iscsictl_enable="NO" # iSCSI initiator autostart.
272 iscsictl_flags="-Aa" # Optional flags to iscsictl.
273 hastd_enable="NO" # Run the HAST daemon (YES/NO).
274 hastd_program="/sbin/hastd" # path to hastd, if you want a different one.
275 hastd_flags="" # Optional flags to hastd.
276 ctld_enable="NO" # CAM Target Layer / iSCSI target daemon.
277 local_unbound_enable="NO" # local caching resolver
278 blacklistd_enable="NO" # Run blacklistd daemon (YES/NO).
279 blacklistd_flags="" # Optional flags for blacklistd(8).
280 resolv_enable="YES" # Enable resolv / resolvconf
283 # kerberos. Do not run the admin daemons on slave servers
285 kdc_enable="NO" # Run a kerberos 5 KDC (or NO).
286 kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC
287 kdc_flags="" # Additional flags to the kerberos 5 KDC
288 kadmind_enable="NO" # Run kadmind (or NO)
289 kadmind_program="/usr/libexec/kadmind" # path to kadmind
290 kpasswdd_enable="NO" # Run kpasswdd (or NO)
291 kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd
292 kfd_enable="NO" # Run kfd (or NO)
293 kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon
295 ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon
297 ipropd_master_program="/usr/libexec/ipropd-master"
298 ipropd_master_flags="" # Flags to ipropd-master.
299 ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master.
300 ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves.
301 ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon
303 ipropd_slave_program="/usr/libexec/ipropd-slave"
304 ipropd_slave_flags="" # Flags to ipropd-slave.
305 ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave.
306 ipropd_slave_master="" # master node name.
308 gssd_enable="NO" # Run the gssd daemon (or NO).
309 gssd_program="/usr/sbin/gssd" # Path to gssd.
310 gssd_flags="" # Flags for gssd.
312 rwhod_enable="NO" # Run the rwho daemon (or NO).
313 rwhod_flags="" # Flags for rwhod
314 rarpd_enable="NO" # Run rarpd (or NO).
315 rarpd_flags="-a" # Flags to rarpd.
316 bootparamd_enable="NO" # Run bootparamd (or NO).
317 bootparamd_flags="" # Flags to bootparamd
318 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
319 pppoed_provider="*" # Provider and ppp(8) config file entry.
320 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
321 pppoed_interface="fxp0" # The interface that pppoed runs on.
322 sshd_enable="NO" # Enable sshd
323 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
324 sshd_flags="" # Additional flags for sshd.
325 ftpd_enable="NO" # Enable stand-alone ftpd.
326 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
327 ftpd_flags="" # Additional flags to stand-alone ftpd.
329 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
330 amd_enable="NO" # Run amd service with $amd_flags (or NO).
331 amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
332 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
333 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
334 autofs_enable="NO" # Run autofs daemons.
335 automount_flags="" # Flags to automount(8) (if autofs enabled).
336 automountd_flags="" # Flags to automountd(8) (if autofs enabled).
337 autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
338 nfs_client_enable="NO" # This host is an NFS client (or NO).
339 nfs_access_cache="60" # Client cache timeout in seconds
340 nfs_server_enable="NO" # This host is an NFS server (or NO).
341 nfs_server_flags="-u -t" # Flags to nfsd (if enabled).
342 nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO).
343 mountd_enable="NO" # Run mountd (or NO).
344 mountd_flags="-r -S" # Flags to mountd (if NFS server enabled).
345 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
346 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
347 nfs_bufpackets="" # bufspace (in packets) for client
348 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
349 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
350 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
351 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
352 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
353 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
354 rpcbind_flags="" # Flags to rpcbind (if enabled).
355 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
356 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
357 keyserv_flags="" # Flags to keyserv (if enabled).
358 nfsv4_server_enable="NO" # Enable support for NFSv4
359 nfscbd_enable="NO" # NFSv4 client side callback daemon
360 nfscbd_flags="" # Flags for nfscbd
361 nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
362 nfsuserd_flags="" # Flags for nfsuserd
364 ### Network Time Services options: ###
365 timed_enable="NO" # Run the time daemon (or NO).
366 timed_flags="" # Flags to timed (if enabled).
367 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
368 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
369 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
370 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
371 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
372 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
373 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
374 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
375 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
376 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
377 # Flags to ntpd (if enabled).
378 ntp_src_leapfile="/etc/ntp/leap-seconds"
379 # Initial source for ntpd leapfile
380 ntp_db_leapfile="/var/db/ntpd.leap-seconds.list"
381 # Working copy (updated weekly) leapfile
382 ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list"
383 # Source from which to fetch leapfile
384 ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch,
385 # e.g. --no-verify-peer
386 ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to
388 ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch
390 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
391 nis_client_enable="NO" # We're an NIS client (or NO).
392 nis_client_flags="" # Flags to ypbind (if enabled).
393 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
394 nis_ypset_flags="" # Flags to ypset (if enabled).
395 nis_server_enable="NO" # We're an NIS server (or NO).
396 nis_server_flags="" # Flags to ypserv (if enabled).
397 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
398 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
399 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
400 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
401 nis_ypldap_enable="NO" # Run ypldap at boot time (or NO).
402 nis_ypldap_flags="" # Flags to ypldap (if enabled).
405 # Be sure to understand the security implications of running SNMP v1/v2
407 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
408 bsnmpd_flags="" # Flags for bsnmpd.
410 ### Network routing options: ###
411 defaultrouter="NO" # Set to default gateway (or NO).
412 static_arp_pairs="" # Set to static ARP list (or leave empty).
413 static_ndp_pairs="" # Set to static NDP list (or leave empty).
414 static_routes="" # Set to static route list (or leave empty).
415 gateway_enable="NO" # Set to YES if this host will be a gateway.
416 routed_enable="NO" # Set to YES to enable a routing daemon.
417 routed_program="/sbin/routed" # Name of routing daemon to use if enabled.
418 routed_flags="-q" # Flags for routing daemon.
419 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
420 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
421 accept_sourceroute="NO" # accept source routed packets to us
424 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
425 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
427 sdpd_enable="NO" # Enable sdpd(8) (or NO)
428 sdpd_control="/var/run/sdp" # sdpd(8) control socket
429 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
430 sdpd_username="nobody" # it initializes
432 bthidd_enable="NO" # Enable bthidd(8) (or NO)
433 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
434 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
436 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
437 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
439 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
440 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
441 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
442 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
444 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
445 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
446 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
447 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
449 ubthidhci_enable="NO" # Switch an USB BT controller present on
450 #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
451 #ubthidhci_addr="2" # Check usbconfig list to find the correct
452 # numbers for your system.
454 ### Network link/usability verification options
455 netwait_enable="NO" # Enable rc.d/netwait (or NO)
456 #netwait_ip="" # Wait for ping response from any IP in this list.
457 netwait_timeout="60" # Total number of seconds to perform pings.
458 #netwait_if="" # Wait for active link on each intf in this list.
459 netwait_if_timeout="30" # Total number of seconds to monitor link state.
461 ### Miscellaneous network options: ###
462 icmp_bmcastecho="NO" # respond to broadcast ping packets
464 ### IPv6 options: ###
465 ipv6_network_interfaces="auto" # List of IPv6 network interfaces
466 # (or "auto" or "none").
467 ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no
468 # corresponding $ifconfig_IF_ipv6 is
469 # marked as IFDISABLED for security
471 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
472 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
473 ipv6_static_routes="" # Set to static route list (or leave empty).
474 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
475 # route toward loopback interface.
476 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
477 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
478 ipv6_cpe_wanif="NO" # Set to the upstream interface name if this
479 # node will work as a router to forward IPv6
480 # packets not explicitly addressed to itself.
481 ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
484 route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon.
485 route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
486 route6d_flags="" # Flags to IPv6 routing daemon.
487 #route6d_flags="-l" # Example for route6d with only IPv6 site local
489 #route6d_flags="-q" # If you want to run a routing daemon on an end
490 # node, you should stop advertisement.
491 #ipv6_network_interfaces="ed0 ep0" # Examples for router
492 # or static configuration for end node.
493 # Choose correct prefix value.
494 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
495 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
496 ipv6_default_interface="NO" # Default output interface for scoped addrs.
497 # This works only with
498 # ipv6_gateway_enable="NO".
499 rtsol_flags="" # Flags to IPv6 router solicitation.
500 rtsold_enable="NO" # Set to YES to enable an IPv6 router
501 # solicitation daemon.
502 rtsold_flags="-a" # Flags to an IPv6 router solicitation
504 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
505 # advertisement daemon. If set to YES,
506 # this router becomes a possible candidate
507 # IPv6 default router for local subnets.
508 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
509 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
510 # tunneling interface. Specify this entry
511 # to enable 6to4 interface.
512 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
513 # to limit peer addr range. Effective value
515 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
516 # If you like, you can set "AUTO" for this.
517 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
518 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
519 # communication. (like ::ffff:a.b.c.d)
520 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
521 # see /usr/src/contrib/ipfilter/rules
523 ip6addrctl_enable="YES" # Set to YES to enable default address selection
524 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
525 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
526 # (ipv4_prefer, ipv6_prefer, or AUTO)
528 ##############################################################
529 ### System console options #################################
530 ##############################################################
532 keyboard="" # keyboard device to use (default /dev/kbd0).
533 keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
534 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
535 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
536 keychange="NO" # function keys default values (or NO).
537 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
538 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
539 font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
540 font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
541 font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
542 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
543 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
544 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
545 # specifically overriden in rc.conf(5).
546 moused_enable="NO" # Run the mouse daemon.
547 moused_type="auto" # See man page for rc.conf(5) for available settings.
548 moused_port="/dev/psm0" # Set to your mouse port.
549 moused_flags="" # Any additional flags to moused.
550 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
551 # language code table, specify alternative range
552 # start like mousechar_start=3, see vidcontrol(1)
553 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
554 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
556 ##############################################################
557 ### Mail Transfer Agent (MTA) options ######################
558 ##############################################################
560 mta_start_script="/etc/rc.sendmail"
561 # Script to start your chosen MTA, called by /etc/rc.
562 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
563 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
564 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
565 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
566 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
567 sendmail_cert_create="YES" # Create a server certificate if none (YES/NO)
568 #sendmail_cert_cn="CN" # CN of the generate certificate
569 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
570 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
571 # Flags for localhost-only MTA
572 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
573 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
574 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
575 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
576 # Flags for sendmail_msp_queue daemon.
577 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
580 ##############################################################
581 ### Miscellaneous administrative options ###################
582 ##############################################################
584 auditd_enable="NO" # Run the audit daemon.
585 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
586 auditd_flags="" # Which options to pass to the audit daemon.
587 auditdistd_enable="NO" # Run the audit daemon.
588 auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
589 auditdistd_flags="" # Which options to pass to the auditdistd daemon.
590 cron_enable="YES" # Run the periodic job daemon.
591 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
592 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
593 cron_flags="" # Which options to pass to the cron daemon.
594 lpd_enable="NO" # Run the line printer daemon.
595 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
596 lpd_flags="" # Flags to lpd (if enabled).
597 nscd_enable="NO" # Run the nsswitch caching daemon.
598 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
599 chkprintcap_flags="-d" # Create missing directories by default.
600 dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
601 dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev.
602 dumpdir="/var/crash" # Directory where crash dumps are to be stored
603 savecore_enable="YES" # Extract core from dump devices if any
604 savecore_flags="-m 10" # Used if dumpdev is enabled above, and present.
605 # By default, only the 10 most recent kernel dumps
607 crashinfo_enable="YES" # Automatically generate crash dump summary.
608 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
609 quota_enable="NO" # turn on quotas on startup (or NO).
610 check_quotas="YES" # Check quotas on startup (or NO).
611 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
612 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
613 quotacheck_flags="-a" # Check all file system quotas (if enabled)
614 accounting_enable="NO" # Turn on process accounting (or NO).
615 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
616 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
617 firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if
618 # this file exists. Should be on a R/W filesystem so
619 # the file can be deleted after the boot completes.
621 # Emulation/compatibility services provided by /etc/rc.d/abi
622 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
623 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
624 clear_tmp_enable="NO" # Clear /tmp at startup.
625 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
626 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
627 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
628 # shared library search paths
629 ldconfig32_paths="/usr/lib32 /usr/lib32/compat"
630 # 32-bit compatibility shared library search paths
631 ldconfigsoft_paths="/usr/libsoft /usr/libsoft/compat /usr/local/libsoft"
632 # soft float compatibility shared library search paths
633 # Note: temporarily with extra stuff for transition
634 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
635 # a.out shared library search paths
636 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
637 # Local directories with ldconfig configuration files.
638 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
639 # Local directories with 32-bit compatibility ldconfig
640 # configuration files.
641 ldconfig_localsoft_dirs="/usr/local/libdata/ldconfigsoft"
642 # Local directories with soft float compatibility ldconfig
643 # configuration files.
644 kern_securelevel_enable="NO" # kernel security level (see security(7))
645 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
646 # Note that setting securelevel to 0 will result
647 # in the system booting with securelevel set to 1, as
648 # init(8) will raise the level when rc(8) completes.
649 update_motd="YES" # update version info in /etc/motd (or NO)
650 entropy_boot_file="/boot/entropy" # Set to NO to disable very early
651 # (used at early boot time) entropy caching through reboots.
652 entropy_file="/entropy" # Set to NO to disable late (used when going multi-user)
653 # entropy through reboots.
654 # /var/db/entropy-file is preferred if / is not avail.
655 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
656 entropy_save_sz="4096" # Size of the entropy cache files.
657 entropy_save_num="8" # Number of entropy cache files to save.
658 harvest_mask="511" # Entropy device harvests all but the very invasive sources.
659 # (See 'sysctl kern.random.harvest' and random(4))
660 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
661 watchdogd_enable="NO" # Start the software watchdog daemon
662 watchdogd_flags="" # Flags to watchdogd (if enabled)
663 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
665 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
666 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
667 # apply (must be mounted already, i.e. fstab(5))
668 devfs_load_rulesets="YES" # Enable to always load the default rulesets
669 performance_cx_lowest="NONE" # Online CPU idle state
670 performance_cpu_freq="NONE" # Online CPU frequency
671 economy_cx_lowest="Cmax" # Offline CPU idle state
672 economy_cpu_freq="NONE" # Offline CPU frequency
673 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
674 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
675 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
677 newsyslog_enable="YES" # Run newsyslog at startup.
678 newsyslog_flags="-CN" # Newsyslog flags to create marked files
679 mixer_enable="YES" # Run the sound mixer.
680 opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off
682 # rctl(8) requires kernel options RACCT and RCTL
683 rctl_enable="YES" # Load rctl(8) rules on boot
684 rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5).
686 iovctl_files="" # Config files for iovctl(8)
688 ##############################################################
689 ### Jail Configuration (see rc.conf(5) manual page) ##########
690 ##############################################################
691 jail_enable="NO" # Set to NO to disable starting of any jails
692 jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration
693 jail_parallel_start="NO" # Start jails in the background
694 jail_list="" # Space separated list of names of jails
695 jail_reverse_stop="NO" # Stop jails in reverse order
697 ##############################################################
698 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
699 ### scripts to source rc_conf_files overrides safely. ##
700 ##############################################################
702 if [ -z "${source_rc_confs_defined}" ]; then
703 source_rc_confs_defined=yes
705 local i sourced_files
706 for i in ${rc_conf_files}; do
707 case ${sourced_files} in
711 sourced_files="${sourced_files}:$i:"
718 # Re-do process to pick up [possibly] redefined $rc_conf_files
719 for i in ${rc_conf_files}; do
720 case ${sourced_files} in
724 sourced_files="${sourced_files}:$i:"
734 # Allow vendors to override FreeBSD defaults in /etc/default/rc.conf
735 # without the need to carefully manage /etc/rc.conf.
736 if [ -r /etc/defaults/vendor.conf ]; then
737 . /etc/defaults/vendor.conf